Orbi pro installed

gistfile1.txt

Format: Log Type - Time(microsec) - Message - Optional Info
Log Type: B - Since Boot(Power On Reset),  D - Delta,  S - Statistic
S - QC_IMAGE_VERSION_STRING=BOOT.BF.3.1.1-00110
S - IMAGE_VARIANT_STRING=DAAAANAZA
S - OEM_IMAGE_VERSION_STRING=CRM
S - Boot Config, 0x00000023
S - Reset status Config, 0x00000000
S - Core 0 Frequency, 0 MHz
B -       262 - PBL, Start
B -      1342 - bootable_media_detect_entry, Start
B -     39867 - bootable_media_detect_success, Start
B -     39881 - elf_loader_entry, Start
B -     42063 - auth_hash_seg_entry, Start
B -     44226 - auth_hash_seg_exit, Start
B -     79209 - elf_segs_hash_verify_entry, Start
B -    194177 - PBL, End
B -    194201 - SBL1, Start
B -    286382 - pm_device_init, Start
D -         9 - pm_device_init, Delta
B -    287896 - boot_flash_init, Start
D -     37327 - boot_flash_init, Delta
B -    329630 - boot_config_data_table_init, Start
D -      2690 - boot_config_data_table_init, Delta - (419 Bytes)
B -    337374 - clock_init, Start
D -      7526 - clock_init, Delta
B -    348562 - CDT version:2,Platform ID:8,Major ID:1,Minor ID:0,Subtype:1
B -    351968 - sbl1_ddr_set_params, Start
B -    357062 - cpr_init, Start
D -         2 - cpr_init, Delta
B -    361445 - Pre_DDR_clock_init, Start
D -         4 - Pre_DDR_clock_init, Delta
D -     13173 - sbl1_ddr_set_params, Delta
B -    374742 - pm_driver_init, Start
D -         2 - pm_driver_init, Delta
B -    446053 - sbl1_wait_for_ddr_training, Start
D -        28 - sbl1_wait_for_ddr_training, Delta
B -    462234 - Image Load, Start
D -     14593 - QSEE Image Loaded, Delta - (268920 Bytes)
B -    477256 - Image Load, Start
D -       899 - SEC Image Loaded, Delta - (0 Bytes)
B -    487112 - Image Load, Start
D -     12607 - APPSBL Image Loaded, Delta - (421607 Bytes)
B -    500146 - QSEE Execution, Start
D -        60 - QSEE Execution, Delta
B -    506322 - SBL1, End
D -    314234 - SBL1, Delta
S - Flash Throughput, 25680 KB/s  (691298 Bytes,  26919 us)
S - DDR Frequency, 672 MHz


U-Boot 2012.07-g9274bc2-dirty [Barrier Breaker unknown,unknown] (Jun 16 2017 - 16:27:21)

U-boot dni1 V1.1 for DNI HW ID: 29765352; NOR flash 0MB; EMMC flash 4096MB; RAM 512MB
smem ram ptable found: ver: 1 len: 3
DRAM:  512 MiB
machid : 0x8010001
NAND:  ID = 0
Vendor = 0
Device = 0
Nand Flash error. Status = 64
ONFI Read id cmd failed
ONFI probe failed
SF NAND unsupported id:ff:ff:ff:ffSF: Unsupported manufacturer ff
ipq_spi: SPI Flash not found (bus/cs/speed/mode) = (0/0/48000000/0)
0 MiB
MMC:   qca_mmc: 0
*** Warning - bad CRC, using default environment

PCI0 Link Intialized
In:    serial
Out:   serial
Err:   serial
Valid chip addresses: 27 48
machid: 8010001
flash_type: 1
Net:   MAC0 addr:b0:39:56:8d:59:69
PHY ID1: 0x4d
PHY ID2: 0xd0b1
ipq40xx_ess_sw_init done
eth0
Hit any key to stop autoboot:  0 
(IPQ40xx) # setenv ipaddr 192.168.2.233
(IPQ40xx) # fw_recovery
eth0 PHY0 up Speed :1000 Full duplex
eth0 PHY1 Down Speed :10 Half duplex
eth0 PHY2 Down Speed :10 Half duplex
eth0 PHY3 Down Speed :10 Half duplex
eth0 PHY4 Down Speed :10 Half duplex

The Router is in TFTP Server Firmware Recovery mode NOW!
Listening on Port : 69, IP Address: 192.168.2.233 ...
            
Rcv:
        .................................................................
        .................................................................
        .................................................................
        .................................................................
        .................................................................
        .................................................................
        .................................................................
        .................................................................
        .................................................................
        .................................................................
        .................................................................
        .................................................................
        .................................................................
        .................................................................
        .................................................................
        .................................................................
        .................................................................
        .................................................................
        .................................................................
        .................................................................
        .................................................................
        ......................................
Done!
Bytes transferred = 7180421 (6d9085 hex)
mmc_read will run command: mmc read 0x871cfd78 0x2c22 0x100

MMC read: dev # 0, block # 11298, count 256 ... 256 blocks read: OK
HW ID on board: 29765352+0+4096+512+2x2+2x2+4x4
HW ID on image: 29765352+0+4096+512+2x2+2x2+4x4
Firmware Image HW ID matched Board HW ID

mmc_read will run command: mmc read 0x871cfd90 0x2c22 0x100

MMC read: dev # 0, block # 11298, count 256 ... 256 blocks read: OK
MODEL ID on board: SRS60
MODEL ID on image: SRS60
Firmware Image MODEL ID matched Board model ID

mmc_read will run command: mmc read 0x871cfd90 0x2c22 0x100

MMC read: dev # 0, block # 11298, count 256 ... 256 blocks read: OK
MODEL ID on board: SRS60
MODEL ID on image: SRS60
Firmware Image MODEL ID matched Board model ID

mmc erase 0x4822 0x36c9

MMC erase: dev # 0, block # 18466, count 14025 ... 14025 blocks erase: OK
Alive-timer 60
NmrpAliveTimerBase 15
Copy image to Flash... mmc write 0x84000080 0x4822 0x36c9

MMC write: dev # 0, block # 18466, count 14025 ... 14025 blocks write: OK
boot_partition_set 1
mmc_read will run command: mmc read 0x871cfb50 0x2c22 0x100

MMC read: dev # 0, block # 11298, count 256 ... 256 blocks read: OK
Burn BOOT PARTITION DATA (= 110701) into ART block
mmc_read will run command: mmc read 0x871cfb50 0x2c22 0x100

MMC read: dev # 0, block # 11298, count 256 ... 256 blocks read: OK
mmc_sect_erase will run command: mmc erase 0x2c22 0x100

MMC erase: dev # 0, block # 11298, count 256 ... 256 blocks erase: OK
mmc_write will run command: mmc write 0x871cfb50 0x2c22 0x100

MMC write: dev # 0, block # 11298, count 256 ... 256 blocks write: OK
Done.
Alive-timer 16
Done
Rebooting...
resetting ...
Valid chip addresses: 27 68

Format: Log Type - Time(microsec) - Message - Optional Info
Log Type: B - Since Boot(Power On Reset),  D - Delta,  S - Statistic
S - QC_IMAGE_VERSION_STRING=BOOT.BF.3.1.1-00110
S - IMAGE_VARIANT_STRING=DAAAANAZA
S - OEM_IMAGE_VERSION_STRING=CRM
S - Boot Config, 0x00000023
S - Reset status Config, 0x00000010
S - Core 0 Frequency, 0 MHz
B -       262 - PBL, Start
B -      1341 - bootable_media_detect_entry, Start
B -     18666 - bootable_media_detect_success, Start
B -     18680 - elf_loader_entry, Start
B -     20863 - auth_hash_seg_entry, Start
B -     23024 - auth_hash_seg_exit, Start
B -     58011 - elf_segs_hash_verify_entry, Start
B -    173182 - PBL, End
B -    173207 - SBL1, Start
B -    265284 - pm_device_init, Start
D -         9 - pm_device_init, Delta
B -    266798 - boot_flash_init, Start
D -     30825 - boot_flash_init, Delta
B -    302034 - boot_config_data_table_init, Start
D -      2639 - boot_config_data_table_init, Delta - (419 Bytes)
B -    309733 - clock_init, Start
D -      7543 - clock_init, Delta
B -    321042 - CDT version:2,Platform ID:8,Major ID:1,Minor ID:0,Subtype:1
B -    324448 - sbl1_ddr_set_params, Start
B -    329542 - cpr_init, Start
D -         2 - cpr_init, Delta
B -    333925 - Pre_DDR_clock_init, Start
D -         4 - Pre_DDR_clock_init, Delta
D -     13173 - sbl1_ddr_set_params, Delta
B -    347222 - pm_driver_init, Start
D -         2 - pm_driver_init, Delta
B -    418591 - sbl1_wait_for_ddr_training, Start
D -        27 - sbl1_wait_for_ddr_training, Delta
B -    434770 - Image Load, Start
D -     14638 - QSEE Image Loaded, Delta - (268920 Bytes)
B -    449836 - Image Load, Start
D -       899 - SEC Image Loaded, Delta - (0 Bytes)
B -    459672 - Image Load, Start
D -     12586 - APPSBL Image Loaded, Delta - (421607 Bytes)
B -    472685 - QSEE Execution, Start
D -        60 - QSEE Execution, Delta
B -    478860 - SBL1, End
D -    307766 - SBL1, Delta
S - Flash Throughput, 25651 KB/s  (691298 Bytes,  26950 us)
S - DDR Frequency, 672 MHz


U-Boot 2012.07-g9274bc2-dirty [Barrier Breaker unknown,unknown] (Jun 16 2017 - 16:27:21)

U-boot dni1 V1.1 for DNI HW ID: 29765352; NOR flash 0MB; EMMC flash 4096MB; RAM 512MB
smem ram ptable found: ver: 1 len: 3
DRAM:  512 MiB
machid : 0x8010001
NAND:  ID = 0
Vendor = 0
Device = 0
Nand Flash error. Status = 64
ONFI Read id cmd failed
ONFI probe failed
SF NAND unsupported id:ff:ff:ff:ffSF: Unsupported manufacturer ff
ipq_spi: SPI Flash not found (bus/cs/speed/mode) = (0/0/48000000/0)
0 MiB
MMC:   qca_mmc: 0
*** Warning - bad CRC, using default environment

PCI0 Link Intialized
In:    serial
Out:   serial
Err:   serial
Valid chip addresses: 27 48
machid: 8010001
flash_type: 1
Net:   MAC0 addr:b0:39:56:8d:59:69
PHY ID1: 0x4d
PHY ID2: 0xd0b1
ipq40xx_ess_sw_init done
eth0
Hit any key to stop autoboot:  0 
eth0 PHY0 Down Speed :10 Half duplex
eth0 PHY1 Down Speed :10 Half duplex
eth0 PHY2 Down Speed :10 Half duplex
eth0 PHY3 Down Speed :10 Half duplex
eth0 PHY4 Down Speed :10 Half duplex

 nmrp server is stopped or failed !
Read BootPart from BOARD DATA...
mmc_read will run command: mmc read 0x871cfba8 0x2c22 0x100

MMC read: dev # 0, block # 11298, count 256 ... 256 blocks read: OK
boot partition : 1
BootPart = 1
Loading DNI firmware for checking...

MMC read: dev # 0, block # 18466, count 256 ... 256 blocks read: OK

MMC read: dev # 0, block # 18722, count 256 ... 256 blocks read: OK

MMC read: dev # 0, block # 18978, count 256 ... 256 blocks read: OK

MMC read: dev # 0, block # 19234, count 256 ... 256 blocks read: OK

MMC read: dev # 0, block # 19490, count 256 ... 256 blocks read: OK

MMC read: dev # 0, block # 19746, count 256 ... 256 blocks read: OK

MMC read: dev # 0, block # 20002, count 256 ... 256 blocks read: OK

MMC read: dev # 0, block # 20258, count 256 ... 256 blocks read: OK

MMC read: dev # 0, block # 20514, count 256 ... 256 blocks read: OK

MMC read: dev # 0, block # 20770, count 256 ... 256 blocks read: OK

MMC read: dev # 0, block # 21026, count 256 ... 256 blocks read: OK

MMC read: dev # 0, block # 21282, count 256 ... 256 blocks read: OK

MMC read: dev # 0, block # 21538, count 256 ... 256 blocks read: OK

MMC read: dev # 0, block # 21794, count 256 ... 256 blocks read: OK

MMC read: dev # 0, block # 22050, count 256 ... 256 blocks read: OK

MMC read: dev # 0, block # 22306, count 256 ... 256 blocks read: OK

MMC read: dev # 0, block # 22562, count 256 ... 256 blocks read: OK

MMC read: dev # 0, block # 22818, count 256 ... 256 blocks read: OK

MMC read: dev # 0, block # 23074, count 256 ... 256 blocks read: OK

MMC read: dev # 0, block # 23330, count 256 ... 256 blocks read: OK

MMC read: dev # 0, block # 23586, count 256 ... 256 blocks read: OK

MMC read: dev # 0, block # 23842, count 256 ... 256 blocks read: OK

MMC read: dev # 0, block # 24098, count 256 ... 256 blocks read: OK

MMC read: dev # 0, block # 24354, count 256 ... 256 blocks read: OK

MMC read: dev # 0, block # 18466, count 1 ... 1 blocks read: OK

** rootfs address : 0x842fffc0 **

## Checking Image at 84000000 ...
   FIT image found
   FIT description: ARM OpenWrt FIT (Flattened Image Tree)
    Image 0 (kernel@1)
     Description:  ARM OpenWrt Linux-4.14.37
     Type:         Kernel Image
     Compression:  gzip compressed
     Data Start:   0x840000e4
     Data Size:    3007014 Bytes = 2.9 MiB
     Architecture: ARM
     OS:           Linux
     Load Address: 0x80208000
     Entry Point:  0x80208000
     Hash algo:    crc32
     Hash value:   57d2832c
     Hash algo:    sha1
     Hash value:   bda137d158e91b57b30c36a11641019463c2c433
    Image 1 (fdt@1)
     Description:  ARM OpenWrt netgear_orbipro device tree blob
     Type:         Flat Device Tree
     Compression:  uncompressed
     Data Start:   0x842de448
     Data Size:    35177 Bytes = 34.4 KiB
     Architecture: ARM
     Hash algo:    crc32
     Hash value:   fc484b4f
     Hash algo:    sha1
     Hash value:   a09b4f31b4f7f4fefb8daa2e8045e5120732315f
    Default Configuration: 'config@1'
    Configuration 0 (config@1)
     Description:  OpenWrt
     Kernel:       kernel@1
     FDT:          fdt@1
## Checking hash(es) for FIT Image at 84000000 ...
   Hash(es) for Image 0 (kernel@1): crc32+ sha1+ 
   Hash(es) for Image 1 (fdt@1): crc32+ sha1+ 

## Checking Image at 842fffc0 ...
   Legacy image found
   Image Name:   OpenWrt fake filesystem
   Image Type:   ARM Linux Filesystem Image (uncompressed)
   Data Size:    0 Bytes = 0 Bytes
   Load Address: 00000000
   Entry Point:  00000000
   Verifying Checksum ... OK
mmc_read will run command: mmc read 0x871cfba8 0x2c22 0x100

MMC read: dev # 0, block # 11298, count 256 ... 256 blocks read: OK
boot partition : 1

MMC read: dev # 0, block # 18466, count 7680 ... 7680 blocks read: OK
## Booting kernel from FIT Image at 84000000 ...
   Using 'config@1' configuration
   Trying 'kernel@1' kernel subimage
     Description:  ARM OpenWrt Linux-4.14.37
     Type:         Kernel Image
     Compression:  gzip compressed
     Data Start:   0x840000e4
     Data Size:    3007014 Bytes = 2.9 MiB
     Architecture: ARM
     OS:           Linux
     Load Address: 0x80208000
     Entry Point:  0x80208000
     Hash algo:    crc32
     Hash value:   57d2832c
     Hash algo:    sha1
     Hash value:   bda137d158e91b57b30c36a11641019463c2c433
   Verifying Hash Integrity ... crc32+ sha1+ OK
## Flattened Device Tree from FIT Image at 84000000
   Using 'config@1' configuration
   Trying 'fdt@1' FDT blob subimage
     Description:  ARM OpenWrt netgear_orbipro device tree blob
     Type:         Flat Device Tree
     Compression:  uncompressed
     Data Start:   0x842de448
     Data Size:    35177 Bytes = 34.4 KiB
     Architecture: ARM
     Hash algo:    crc32
     Hash value:   fc484b4f
     Hash algo:    sha1
     Hash value:   a09b4f31b4f7f4fefb8daa2e8045e5120732315f
   Verifying Hash Integrity ... crc32+ sha1+ OK
   Booting using the fdt blob at 0x842de448
   Uncompressing Kernel Image ... OK
   Loading Device Tree to 871e3000, end 871ee968 ... OK
Using machid 0x8010001 from environment

Starting kernel ...

[    0.000000] Booting Linux on physical CPU 0x0
[    0.000000] Linux version 4.14.37 (robimarko@localhost.localdomain) (gcc version 7.3.0 (OpenWrt GCC 7.3.0 r6868-004d90fc7c)) #0 SMP Mon May 14 18:01:16 2018
[    0.000000] CPU: ARMv7 Processor [410fc075] revision 5 (ARMv7), cr=10c5387d
[    0.000000] CPU: div instructions available: patching division code
[    0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[    0.000000] OF: fdt: Machine model: Netgear Orbi Pro
[    0.000000] Memory policy: Data cache writealloc
[    0.000000] random: get_random_bytes called from start_kernel+0x88/0x3c0 with crng_init=0
[    0.000000] percpu: Embedded 15 pages/cpu @dfba0000 s29260 r8192 d23988 u61440
[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 129536
[    0.000000] Kernel command line: rootdelay=3 root=/dev/mmcblk0p14 rootfstype=squashfs,ext4
[    0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
[    0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[    0.000000] Memory: 509748K/522240K available (4325K kernel code, 141K rwdata, 1220K rodata, 1024K init, 246K bss, 12492K reserved, 0K cma-reserved, 0K highmem)
[    0.000000] Virtual kernel memory layout:
[    0.000000]     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
[    0.000000]     fixmap  : 0xffc00000 - 0xfff00000   (3072 kB)
[    0.000000]     vmalloc : 0xe0800000 - 0xff800000   ( 496 MB)
[    0.000000]     lowmem  : 0xc0000000 - 0xe0000000   ( 512 MB)
[    0.000000]     pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)
[    0.000000]     modules : 0xbf000000 - 0xbfe00000   (  14 MB)
[    0.000000]       .text : 0xc0208000 - 0xc07394a0   (5318 kB)
[    0.000000]       .init : 0xc0900000 - 0xc0a00000   (1024 kB)
[    0.000000]       .data : 0xc0a00000 - 0xc0a23400   ( 141 kB)
[    0.000000]        .bss : 0xc0a25000 - 0xc0a62874   ( 247 kB)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.000000] Hierarchical RCU implementation.
[    0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16
[    0.000000] arch_timer: cp15 timer(s) running at 48.00MHz (virt).
[    0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xb11fd3bfb, max_idle_ns: 440795203732 ns
[    0.000007] sched_clock: 56 bits at 48MHz, resolution 20ns, wraps every 4398046511096ns
[    0.000022] Switching to timer-based delay loop, resolution 20ns
[    0.000423] Calibrating delay loop (skipped), value calculated using timer frequency.. 96.00 BogoMIPS (lpj=480000)
[    0.000441] pid_max: default: 32768 minimum: 301
[    0.000574] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
[    0.000592] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
[    0.001108] CPU: Testing write buffer coherency: ok
[    0.001730] Setting up static identity map for 0x80300000 - 0x80300060
[    0.001854] Hierarchical SRCU implementation.
[    0.002427] smp: Bringing up secondary CPUs ...
[    0.004880] smp: Brought up 1 node, 4 CPUs
[    0.004899] SMP: Total of 4 processors activated (384.00 BogoMIPS).
[    0.004907] CPU: All CPU(s) started in SVC mode.
[    0.013893] VFP support v0.3: implementor 41 architecture 2 part 30 variant 7 rev 5
[    0.014045] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[    0.014070] futex hash table entries: 1024 (order: 4, 65536 bytes)
[    0.014246] pinctrl core: initialized pinctrl subsystem
[    0.015117] NET: Registered protocol family 16
[    0.015410] DMA: preallocated 256 KiB pool for atomic coherent allocations
[    0.016471] cpuidle: using governor ladder
[    0.016513] cpuidle: using governor menu
[    0.034395] msm_bus_fabric_init_driver
[    0.034647] msm_bus_device 580000.ad-hoc-bus: Util-fact is missing, default to 100
[    0.034664] msm_bus_device 580000.ad-hoc-bus: Vrail-comp is missing, default to 100
[    0.034683] msm_bus_device 580000.ad-hoc-bus: Failed to get bus clk for bus4096 ctx1
[    0.034721] msm_bus_device 580000.ad-hoc-bus: Util-fact is missing, default to 100
[    0.034733] msm_bus_device 580000.ad-hoc-bus: Vrail-comp is missing, default to 100
[    0.034749] msm_bus_device 580000.ad-hoc-bus: Failed to get bus clk for bus1024 ctx1
[    0.092045] usbcore: registered new interface driver usbfs
[    0.092108] usbcore: registered new interface driver hub
[    0.092205] usbcore: registered new device driver usb
[    0.092251] pps_core: LinuxPPS API ver. 1 registered
[    0.092260] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    0.092286] PTP clock support registered
[    0.093336] clocksource: Switched to clocksource arch_sys_counter
[    0.094165] NET: Registered protocol family 2
[    0.094756] TCP established hash table entries: 4096 (order: 2, 16384 bytes)
[    0.094819] TCP bind hash table entries: 4096 (order: 3, 32768 bytes)
[    0.094907] TCP: Hash tables configured (established 4096 bind 4096)
[    0.095009] UDP hash table entries: 256 (order: 1, 8192 bytes)
[    0.095044] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
[    0.095240] NET: Registered protocol family 1
[    0.096259] No memory allocated for crashlog
[    0.096396] workingset: timestamp_bits=30 max_order=17 bucket_order=0
[    0.099587] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    0.099602] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
[    0.104562] io scheduler noop registered
[    0.104580] io scheduler deadline registered (default)
[    0.105718] OF: PCI: host bridge /soc/pci@40000000 ranges:
[    0.105753] OF: PCI:    IO 0x40200000..0x402fffff -> 0x40200000
[    0.105770] OF: PCI:   MEM 0x40300000..0x406fffff -> 0x40300000
[    0.323344] qcom-pcie 40000000.pci: link up
[    0.323506] qcom-pcie 40000000.pci: PCI host bridge to bus 0000:00
[    0.323526] pci_bus 0000:00: root bus resource [bus 00-ff]
[    0.323542] pci_bus 0000:00: root bus resource [io  0x0000-0xfffff] (bus address [0x40200000-0x402fffff])
[    0.323554] pci_bus 0000:00: root bus resource [mem 0x40300000-0x406fffff]
[    0.323879] PCI: bus0: Fast back to back transfers disabled
[    0.324976] PCI: bus1: Fast back to back transfers disabled
[    0.325027] pci 0000:00:00.0: BAR 8: assigned [mem 0x40400000-0x405fffff]
[    0.325043] pci 0000:00:00.0: BAR 0: assigned [mem 0x40300000-0x40300fff 64bit]
[    0.325067] pci 0000:01:00.0: BAR 0: assigned [mem 0x40400000-0x405fffff 64bit]
[    0.325128] pci 0000:00:00.0: PCI bridge to [bus 01-ff]
[    0.325144] pci 0000:00:00.0:   bridge window [mem 0x40400000-0x405fffff]
[    0.325897] pcieport 0000:00:00.0: AER enabled with IRQ 96
[    0.328126] tcsr 1949000.tcsr: setting wifi_glb_cfg = 41000000
[    0.328212] tcsr 194b000.tcsr: setting usb hs phy mode select = e700e7
[    0.328286] tcsr 1953000.ess_tcsr: setting ess interface select = 0
[    0.328358] tcsr 1957000.tcsr: setting wifi_noc_memtype_m0_m2 = 2222222
[    0.328583] Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled
[    0.329145] msm_serial 78af000.serial: msm_serial: detected port #0
[    0.329191] msm_serial 78af000.serial: uartclk = 1843200
[    0.329237] 78af000.serial: ttyMSM0 at MMIO 0x78af000 (irq = 26, base_baud = 115200) is a MSM
[    0.329263] msm_serial: console setup on port #0
[    0.977895] console [ttyMSM0] enabled
[    0.982783] msm_serial: driver initialized
[    0.990247] loop: module loaded
[    0.991350] spi_qup 78b5000.spi: IN:block:16, fifo:64, OUT:block:16, fifo:64
[    0.994275] libphy: ipq40xx_mdio: probed
[    1.031035] ESS reset ok!
[    1.064017] ESS reset ok!
[    1.493799] libphy: Fixed MDIO Bus: probed
[    1.594039] i2c /dev entries driver
[    1.594309] i2c_qup 78b7000.i2c: using default clock-frequency 100000
[    1.598715] sdhci: Secure Digital Host Controller Interface driver
[    1.602932] sdhci: Copyright(c) Pierre Ossman
[    1.609087] sdhci-pltfm: SDHCI platform and OF driver helper
[    1.613959] sdhci_msm 7824900.sdhci: Got SD LDO GPIO #33
[    1.719200] sdhci_msm 7824900.sdhci: No vreg data found for vdd
[    1.719230] sdhci_msm 7824900.sdhci: No vreg data found for vdd-io
[    1.723946] sdhci_msm 7824900.sdhci: Could not get active pinstates, err:-19
[    1.730178] sdhci_msm 7824900.sdhci: Parsing Pinctrl failed with -19, falling back on GPIO lib
[    1.826491] mmc0: SDHCI controller on 7824900.sdhci [7824900.sdhci] using ADMA 64-bit
[    1.847063] NET: Registered protocol family 10
[    1.848919] Segment Routing with IPv6
[    1.850508] NET: Registered protocol family 17
[    1.854676] 8021q: 802.1Q VLAN Support v1.8
[    1.858583] Registering SWP/SWPB emulation handler
[    1.86[    1.869384] Waiting 3 sec before mounting root device...
[    1.949262] mmc0: Reset 0x1 never completed.
[    1.949288] mmc0: sdhci: ============ SDHCI REGISTER DUMP ===========
[    1.952598] mmc0: sdhci: Sys addr:  0x00000000 | Version:  0x00004202
[    1.958948] mmc0: sdhci: Blk size:  0x00000000 | Blk cnt:  0x00000000
[    1.965368] mmc0: sdhci: Argument:  0x00000000 | Trn mode: 0x00000000
[    1.971782] mmc0: sdhci: Present:   0x01f80000 | Host ctl: 0x00000000
[    1.978223] mmc0: sdhci: Power:     0x00000000 | Blk gap:  0x00000000
[    1.984641] mmc0: sdhci: Wake-up:   0x00000000 | Clock:    0x00000003
[    1.991052] mmc0: sdhci: Timeout:   0x00000000 | Int stat: 0x00000000
[    1.997487] mmc0: sdhci: Int enab:  0x00000000 | Sig enab: 0x00000000
[    2.003910] mmc0: sdhci: AC12 err:  0x00000000 | Slot int: 0x00000000
[    2.010322] mmc0: sdhci: Caps:      0x302dc8b2 | Caps_1:   0x00008007
[    2.016757] mmc0: sdhci: Cmd:       0x00000000 | Max curr: 0x00000000
[    2.023171] mmc0: sdhci: Resp[0]:   0x00000000 | Resp[1]:  0x00000000
[    2.029603] mmc0: sdhci: Resp[2]:   0x00000000 | Resp[3]:  0x00000000
[    2.036025] mmc0: sdhci: Host ctl2: 0x00000000
[    2.042440] mmc0: sdhci: ADMA Err:  0x00000000 | ADMA Ptr: 0x0000000000000000
[    2.046790] mmc0: sdhci: ============================================
[    2.196088] mmc0: new HS200 MMC card at address 0001
[    2.196665] mmcblk0: mmc0:0001 M62704 3.53 GiB 
[    2.200326] mmcblk0rpmb: mmc0:0001 M62704 partition 3 512 KiB
[    2.206302]  mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 p16
[    4.892980] VFS: Cannot open root device "mmcblk0p14" or unknown-block(179,14): error -19
[    4.893214] Please append a correct "root=" boot option; here are the available partitions:
[    4.900760] b300         3702784 mmcblk0 
[    4.900825]  driver: mmcblk
[    4.912579]   b301             512 mmcblk0p1 925fa9eb-4590-1479-f6b2-4efa95a82640
[    4.912584] 
[    4.922819]   b302             512 mmcblk0p2 20728fc1-746e-e4d2-9c71-a9bfe163f7eb
[    4.922824] 
[    4.931760]   b303             512 mmcblk0p3 29e6bceb-fcda-6566-fc8e-eaff53903e11
[    4.931765] 
[    4.940699]   b304             512 mmcblk0p4 9ea97bd9-1ede-3f7a-90d2-96f9e4e32081
[    4.940704] 
[    4.949655]   b305             256 mmcblk0p5 df226c76-f851-e2a8-ffee-36a5df5c7568
[    4.949660] 
[    4.958598]   b306             256 mmcblk0p6 191e2df8-fc3e-3c4c-8996-5bab6dffb1f6
[    4.958602] 
[    4.967541]   b307             512 mmcblk0p7 f9373805-c5f6-a23e-bbd9-82a27ddc3430
[    4.967547] 
[    4.976478]   b308             256 mmcblk0p8 79ccd34e-fc87-deba-98dd-d2becc957fb2
[    4.976482] 
[    4.985420]   b309            1024 mmcblk0p9 d5a083b0-56bc-6024-ab0c-dcc5f9206013
[    4.985425] 
[    4.994359]   b30a            1024 mmcblk0p10 8c9f9f23-b202-a410-e1e2-691fc11fbdb3
[    4.994364] 
[    5.003285]   b30b             256 mmcblk0p11 594de900-cb7f-9662-6af2-25d2584512ef
[    5.003289] 
[    5.012312]   b30c            8192 mmcblk0p12 9ccd0ca0-e208-dc09-c532-01c27d548197
[    5.012317] 
[    5.021343]   b30d            8192 mmcblk0p13 58dd6e12-fafe-cfe2-d8a9-4a6bb376a1e7
[    5.021348] 
[    5.030386]   b30e           65536 mmcblk0p14 c4ef1938-1fde-bd71-ebe1-8f0122a44420
[    5.030390] 
[    5.039412]   b30f           65536 mmcblk0p15 2e47cf1c-2231-7cfb-6849-a10fe5969252
[    5.039416] 
[    5.048439]   103:00000    1310720 mmcblk0p16 df811b80-6ff7-a062-33e9-00b7f4b4c631
[    5.048444] 
[    5.057475] b310             512 mmcblk0rpmb 
[    5.057480]  (driver?)
[    5.063369] Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(179,14)
[    5.065631] CPU2: stopping
[    5.074211] CPU: 2 PID: 0 Comm: swapper/2 Not tainted 4.14.37 #0
[    5.076811] Hardware name: Generic DT based system
[    5.083008] [<c030eaf0>] (unwind_backtrace) from [<c030b01c>] (show_stack+0x10/0x14)
[    5.087596] [<c030b01c>] (show_stack) from [<c07209a8>] (dump_stack+0x88/0x9c)
[    5.095490] [<c07209a8>] (dump_stack) from [<c030ddf8>] (handle_IPI+0xe4/0x18c)
[    5.102519] [<c030ddf8>] (handle_IPI) from [<c030143c>] (gic_handle_irq+0x8c/0x90)
[    5.109724] [<c030143c>] (gic_handle_irq) from [<c030bb8c>] (__irq_svc+0x6c/0x90)
[    5.117354] Exception stack(0xdf46bf80 to 0xdf46bfc8)
[    5.124912] bf80: 00000001 00000000 00000000 c0313f40 ffffe000 c0a03c70 c0a03c24 00000000
[    5.129949] bfa0: 00000000 410fc075 00000000 00000000 df46bfc8 df46bfd0 c03081c0 c03081c4
[    5.138100] bfc0: 60000013 ffffffff
[    5.146263] [<c030bb8c>] (__irq_svc) from [<c03081c4>] (arch_cpu_idle+0x34/0x38)
[    5.149572] [<c03081c4>] (arch_cpu_idle) from [<c0349500>] (do_idle+0xdc/0x1a0)
[    5.157208] [<c0349500>] (do_idle) from [<c0349820>] (cpu_startup_entry+0x18/0x1c)
[    5.164236] [<c0349820>] (cpu_startup_entry) from [<8030170c>] (0x8030170c)
[    5.171869] CPU0: stopping
[    5.178721] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 4.14.37 #0
[    5.181496] Hardware name: Generic DT based system
[    5.187680] [<c030eaf0>] (unwind_backtrace) from [<c030b01c>] (show_stack+0x10/0x14)
[    5.192280] [<c030b01c>] (show_stack) from [<c07209a8>] (dump_stack+0x88/0x9c)
[    5.200173] [<c07209a8>] (dump_stack) from [<c030ddf8>] (handle_IPI+0xe4/0x18c)
[    5.207203] [<c030ddf8>] (handle_IPI) from [<c030143c>] (gic_handle_irq+0x8c/0x90)
[    5.214407] [<c030143c>] (gic_handle_irq) from [<c030bb8c>] (__irq_svc+0x6c/0x90)
[    5.222039] Exception stack(0xc0a01f48 to 0xc0a01f90)
[    5.229594] 1f40:                   00000001 00000000 00000000 c0313f40 ffffe000 c0a03c70
[    5.234637] 1f60: c0a03c24 00000000 00000000 c092ca28 dfffcdc0 00000000 c0a01f90 c0a01f98
[    5.242791] 1f80: c03081c0 c03081c4 60000013 ffffffff
[    5.250951] [<c030bb8c>] (__irq_svc) from [<c03081c4>] (arch_cpu_idle+0x34/0x38)
[    5.255990] [<c03081c4>] (arch_cpu_idle) from [<c0349500>] (do_idle+0xdc/0x1a0)
[    5.263453] [<c0349500>] (do_idle) from [<c0349820>] (cpu_startup_entry+0x18/0x1c)
[    5.270492] [<c0349820>] (cpu_startup_entry) from [<c0900c90>] (start_kernel+0x3b4/0x3c0)
[    5.278128] [<c0900c90>] (start_kernel) from [<8020807c>] (0x8020807c)
[    5.286362] CPU1: stopping
[    5.292784] CPU: 1 PID: 0 Comm: swapper/1 Not tainted 4.14.37 #0
[    5.295472] Hardware name: Generic DT based system
[    5.301656] [<c030eaf0>] (unwind_backtrace) from [<c030b01c>] (show_stack+0x10/0x14)
[    5.306255] [<c030b01c>] (show_stack) from [<c07209a8>] (dump_stack+0x88/0x9c)
[    5.314149] [<c07209a8>] (dump_stack) from [<c030ddf8>] (handle_IPI+0xe4/0x18c)
[    5.321179] [<c030ddf8>] (handle_IPI) from [<c030143c>] (gic_handle_irq+0x8c/0x90)
[    5.328384] [<c030143c>] (gic_handle_irq) from [<c030bb8c>] (__irq_svc+0x6c/0x90)
[    5.336016] Exception stack(0xdf469f80 to 0xdf469fc8)
[    5.343575] 9f80: 00000001 00000000 00000000 c0313f40 ffffe000 c0a03c70 c0a03c24 00000000
[    5.348612] 9fa0: 00000000 410fc075 00000000 00000000 df469fc8 df469fd0 c03081c0 c03081c4
[    5.356763] 9fc0: 60000013 ffffffff
[    5.364923] [<c030bb8c>] (__irq_svc) from [<c03081c4>] (arch_cpu_idle+0x34/0x38)
[    5.368230] [<c03081c4>] (arch_cpu_idle) from [<c0349500>] (do_idle+0xdc/0x1a0)
[    5.375869] [<c0349500>] (do_idle) from [<c0349820>] (cpu_startup_entry+0x18/0x1c)
[    5.382896] [<c0349820>] (cpu_startup_entry) from [<8030170c>] (0x8030170c)
[    5.390539] Rebooting in 1 seconds..