felixstorm

# Be warned: This is just a first try and still very much work in progress - no guarantees given whatsoever!
#
# To install the ESPHome firmware on the WiCAN for the first time (before being able to use ESPHome OTA), I built the firmware
# for download (in "modern" format) and then used the following command line on Linux:
# esptool.py --before=default_reset --after=hard_reset --no-stub write_flash --flash_mode dio --flash_freq 80m --flash_size 4MB 0x0 /home/.../Downloads/m-wican-factory.bin
#
# Don't forget to short the pins to enable boot mode (https://github.com/meatpiHQ/wican-fw#obd).
#
# Using the graphical tool (https://github.com/meatpiHQ/wican-fw#2-usb-flash) will probably work just as well. Just populate
# the first item in the list with 0x0 and /home/.../Downloads/m-wican-factory.bin and leave the rest empty.

patpac9

blueprint:
  name: Easy Customizable Controller Automation Blueprint for Hue Dimmer Switch in Zigbee2MQTT
  description:
    Controller automation for easy customizable Buttons with Philips Hue Dimmer Switch.



    ----------------------------------------------------------------------

    __-------->  !!!!!!!!! FRUSTRATION CAUTION !!!!!!!!!   <--------__

anotherkev

# Moved to https://github.com/anotherkev/homeassistant-config/blob/main/ui-lovelace.yaml

emxsys

How to Run a Script as a Service in Raspberry Pi - Raspbian Jessie

By: Diego Acuña

Original Article: http://www.diegoacuna.me/how-to-run-a-script-as-a-service-in-raspberry-pi-raspbian-jessie/

A pretty common task when using this device, is to run some script (for example a python script) as a service in the operating system so it can start on boot, stop and restart using systemctl and more. In this post I'm going to explain how to set a little script as a service using Raspbian Jessie in a Raspberry Pi.

Example Python Script

AdamNaj

This code was moved

This code is usable only if you are on Home Assistant 0.114 or older

For Home Assistant 0.115 and newer please go to: https://github.com/AdamNaj/ZWaveGraphHA

dd-han

ASUSWRT-MERLIN custom DDNS Script for Cloudflare

for Cloudflare as DDNS

using Cloudflare API v4

Using

put ddns-start at /jffs/scripts/, setting values and set DDNS type to Custom at web Admin panel.