Skip to content

Instantly share code, notes, and snippets.

/*
Blink
Turns on an LED on for one second, then off for one second, repeatedly.
This example code is in the public domain.
*/
// Pin 13 has an LED connected on most Arduino boards.
// give it a name:
int led = 13; // <--- CHANGE THIS LED PIN TO 81 or 82 FOR LED2 or LED3 ON MACCHINA
uint8_t readline(char *buff, uint8_t maxbuff, uint16_t timeout) {
uint16_t buffidx = 0;
boolean timeoutvalid = true;
if (timeout == 0) timeoutvalid = false;
while (true) {
if (buffidx > maxbuff) {
//Serial.println(F("SPACE"));
break;
}
// read the CCID
fona.getSIMCCID(replybuffer); // make sure replybuffer is at least 21 bytes!
Serial.print(F("SIM CCID = "));
Serial.println(replybuffer);
break;
}
case 'i':
{
// read the RSSI
@rocketjosh
rocketjosh / history.md
Last active March 7, 2017 01:18 — forked from morganrallen/history.md
Macchina M2-B Hacking Notes

cli history

miniterm.py `udevserial -v ID_MODEL=Arduino_Due -v SUBSYSTEM=tty` 115200 --raw
esptool32 --port `udevserial -v ID_MODEL=Arduino_Due -v SUBSYSTEM=tty` --before no_reset --after no_reset --baud 115200 write_flash 0x10000 ~/devel/ESP32/esp-idf/examples/bluetooth/gatt_server/build/gatt_server_demos.bin
@rocketjosh
rocketjosh / OBD9141_DUE.INO
Last active October 27, 2017 01:34
OBD9141_DUE.INO
/*
* Example based on code found here.
* https://github.com/iwanders/OBD9141
*
* Put the "OBD9141 in Libraries folder.
*
*/
#include "OBD9141.h"
#include "SamNonDuePin.h"
/*
* Example based on code found here.
* https://github.com/iwanders/OBD9141
*
* Put the "OBD9141 in Libraries folder.
*
*/
#include "OBD9141.h"
@rocketjosh
rocketjosh / Macchina_MPG.INO
Created November 3, 2017 17:08
Display MPG information with LED display and Macchina M2 with ISO9141-based vehicle
/*
* MPG LED display using Adafruit NeoPixel and Macchina M2 with a pre-CAN bus
* ISO9141 (K-line) based vehicle.
*
* These parts are used in this project:
*
* https://www.macchina.cc/content/m2-under-dash
* https://www.adafruit.com/product/2869
*
* Requires "Macchina M2" board to be installed and selected. For instructions, go here:
debian@beaglebone:/opt/source/bb.org-overlays/src/arm$ ls
ACME-revB.dts BB-I2C2-RTC-DS1338.dts cape-univ-emmc-00A0.dts
AM335X-20-00A0.dts BBIM-00A0.dts cape-universal-00A0.dts
AM335X-I2C1-400-00A0.dts bb-justboom-amp-00A0.dts cape-universala-00A0.dts
AM335X-I2C2-400-00A0.dts bb-justboom-dac-00A0.dts cape-universalh-00A0.dts
AM335X-PRU-RPROC-4-14-TI-00A0.dts bb-justboom-digi-00A0.dts cape-universaln-00A0.dts
AM335X-PRU-RPROC-4-14-TI-PRUCAPE-00A0.dts BB-LCD-ADAFRUIT-18-SPI1-00A0.dts cape-univ-hdmi-00A0.dts
AM335X-PRU-RPROC-4-19-TI-00A0.dts BB-mBC1-ETH-CLICK.dts dev-USB-PWR-CTL-00A1.dts
AM335X-PRU-RPROC-4-19-TI-PRUCAPE-00A0.dts BB-mBC1-ETH-WIZ-CLICK.dts DLPDLCR2000-00A0.dts
AM335X-PRU-RPROC-4-4-TI-00A0.dts BB-mBC1-RTC-5-CLICK.dts DVK530-LCD4-01-00A0.dts
//Modified from this library to blink LED:
//https://github.com/miwagner/ESP32-Arduino-CAN
//
//Follow these instructions to install ESP32 board files:
//https://github.com/espressif/arduino-esp32/blob/master/docs/arduino-ide/boards_manager.md
#include <ESP32CAN.h>
#include <CAN_config.h>
CAN_device_t CAN_cfg; // CAN Config
ID: 100FFEE
Extended: Yes
Length: 6
23 FE 1D 7A 1D 7A
ID: 340
Extended: No
Length: 4
23 FE 1D 7A