Created
September 16, 2021 07:27
-
-
Save rokuyama/b0482d370f9551ef2685628ad32d11c2 to your computer and use it in GitHub Desktop.
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
[ 1.0000000] Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, | |
[ 1.0000000] 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, | |
[ 1.0000000] 2018, 2019, 2020, 2021 The NetBSD Foundation, Inc. All rights reserved. | |
[ 1.0000000] Copyright (c) 1982, 1986, 1989, 1991, 1993 | |
[ 1.0000000] The Regents of the University of California. All rights reserved. | |
[ 1.0000000] NetBSD 9.99.88 (GENERIC-$Revision: 1.414 $) #70: Mon Sep 13 21:58:10 JST 2021 | |
[ 1.0000000] rin@latipes:/sys/arch/alpha/compile/DS10 | |
[ 1.0000000] COMPAQ AlphaServer DS10 466 MHz, s/n | |
[ 1.0000000] 8192 byte page size, 1 processor. | |
[ 1.0000000] total memory = 2048 MB | |
[ 1.0000000] (2976 KB reserved for PROM, 2045 MB used by NetBSD) | |
[ 1.0000000] avail memory = 2004 MB | |
[ 1.0000000] timecounter: Timecounters tick every 0.976 msec | |
[ 1.0000000] Kernelized RAIDframe activated | |
[ 1.0000000] mainbus0 (root) | |
[ 1.0000000] cpu0 at mainbus0: ID 0 (primary), 21264-4 (EV6) | |
[ 1.0000000] cpu0: Architecture extensions: 0x303<PAT,MVI,FIX,BWX> | |
[ 1.0000000] tsc0 at mainbus0: 21272 Core Logic Chipset, Cchip rev 0 | |
[ 1.0000000] tsc0: 2 Dchips, 1 memory bus of 16 bytes | |
[ 1.0000000] tsc0: arrays present: 1024MB, 1024MB, 0MB, 0MB, Dchip 0 rev 1 | |
[ 1.0000000] tsp0 at tsc0 | |
[ 1.0000000] pci0 at tsp0 bus 0 | |
[ 1.0000000] pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok | |
[ 1.0000000] sio0 at pci0 dev 7 function 0: Acer Labs M1533 PCI-ISA Bridge (rev. 0xc3) | |
[ 1.0000000] tlp0 at pci0 dev 9 function 0: DECchip 21143 Ethernet, pass 4.1 | |
[ 1.0000000] tlp0: interrupting at dec 6600 irq 29 | |
[ 1.0000000] tlp0: DEC, Ethernet address 08:00:2b:87:2a:9b | |
[ 1.0000000] tlp0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto | |
[ 1.0000000] tlp1 at pci0 dev 11 function 0: DECchip 21143 Ethernet, pass 4.1 | |
[ 1.0000000] tlp1: interrupting at dec 6600 irq 30 | |
[ 1.0000000] tlp1: DEC, Ethernet address 08:00:2b:87:2f:7b | |
[ 1.0000000] tlp1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto | |
[ 1.0000000] aceride0 at pci0 dev 13 function 0: Acer Labs M5229 UDMA IDE Controller (rev. 0xc1) | |
[ 1.0000000] aceride0: bus-master DMA support present, but unused (forced off by config file) | |
[ 1.0000000] aceride0: primary channel wired to compatibility mode | |
[ 1.0000000] aceride0: primary channel interrupting at isa irq 14 | |
[ 1.0000000] atabus0 at aceride0 channel 0 | |
[ 1.0000000] aceride0: secondary channel wired to compatibility mode | |
[ 1.0000000] aceride0: secondary channel interrupting at isa irq 15 | |
[ 1.0000000] atabus1 at aceride0 channel 1 | |
[ 1.0000000] ppb0 at pci0 dev 14 function 0: PLX Technology PEX 8112 PCIe-to-PCI Bridge (rev. 0xaa) | |
[ 1.0000000] ppb0: PCI Express capability version 1 <PCI/PCI-X to PCI-E Bridge> x1 @ 2.5GT/s | |
[ 1.0000000] pci1 at ppb0 bus 2 | |
[ 1.0000000] pci1: i/o space, memory space enabled, rd/line, wr/inv ok | |
[ 1.0000000] ixg0 at pci1 dev 0 function 0: Intel(R) PRO/10GbE PCI-Express Network Driver, Version - 4.0.1-k | |
[ 1.0000000] ixg0: clearing prefetchable bit | |
[ 1.0000000] ixg0: device X550 | |
[ 1.0000000] ixg0: NVM Image Version 1.86, PHY FW Revision 2.0b ID 0xb, NVM Map version 1.86, OEM NVM Image version 0.02, ETrackID 80000c66 | |
[ 1.0000000] ixg0: interrupting at dec 6600 irq 35 | |
[ 1.0000000] ixg0: Ethernet address b4:96:91:45:e9:ae | |
[ 1.0000000] ixg0: PHY: Intel X550 100M/1G/10G media interface (OUI 0x00aa00, model 0x0022), rev. 0 | |
[ 1.0000000] ixg0: PCI Express Bus: Speed 2.5GT/s Width x1 | |
[ 1.0000000] ixg0: PCI-Express bandwidth available for this card | |
[ 1.0000000] is not sufficient for optimal performance. | |
[ 1.0000000] ixg0: For optimal performance a x8 PCIE, or x4 PCIE Gen2 slot is required. | |
[ 1.0000000] ixg0: feature cap 0x17a0<TEMP_SENSOR,LEGACY_TX,FDIR,MSI,MSIX,LEGACY_IRQ> | |
[ 1.0000000] ixg0: feature ena 0x1020<TEMP_SENSOR,LEGACY_IRQ> | |
[ 1.0000000] wm0 at pci0 dev 15 function 0: Intel i82546GB 1000BASE-T Ethernet (rev. 0x03) | |
[ 1.0000000] wm0: interrupting at dec 6600 irq 39 | |
[ 1.0000000] wm0: 64-bit 33MHz PCI bus | |
[ 1.0000000] wm0: 256 words (8 address bits) MicroWire EEPROM | |
[ 1.0000000] wm0: Ethernet address 00:04:23:c3:96:ac | |
[ 1.0000000] wm0: 0xc02<LOCK_EECD,IOH_VALID,BUS64> | |
[ 1.0000000] makphy0 at wm0 phy 1: Marvell 88E1011 Gigabit PHY, rev. 5 | |
[ 1.0000000] makphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto | |
[ 1.0000000] wm1 at pci0 dev 15 function 1: Intel i82546GB 1000BASE-T Ethernet (rev. 0x03) | |
[ 1.0000000] wm1: interrupting at dec 6600 irq 38 | |
[ 1.0000000] wm1: 64-bit 33MHz PCI bus | |
[ 1.0000000] wm1: 256 words (8 address bits) MicroWire EEPROM | |
[ 1.0000000] wm1: Ethernet address 00:04:23:c3:96:ad | |
[ 1.0000000] wm1: 0xc02<LOCK_EECD,IOH_VALID,BUS64> | |
[ 1.0000000] makphy1 at wm1 phy 1: Marvell 88E1011 Gigabit PHY, rev. 5 | |
[ 1.0000000] makphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto | |
[ 1.0000000] ppb1 at pci0 dev 16 function 0: Pericom Semiconductors PI7C9X111SL PCIe to PCI Reverse Bridge (rev. 0x02) | |
[ 1.0000000] ppb1: PCI Express capability version 1 <PCI/PCI-X to PCI-E Bridge> x1 @ 2.5GT/s | |
[ 1.0000000] pci2 at ppb1 bus 3 | |
[ 1.0000000] pci2: i/o space, memory space enabled, rd/line, wr/inv ok | |
[ 1.0000000] nvme0 at pci2 dev 0 function 0: vendor 1dee product 2262 (rev. 0x03) | |
[ 1.0000000] nvme0: NVMe 1.3 | |
[ 1.0000000] nvme0: cap 0x00100030f0013fff | |
[ 1.0000000] nvme0: mpsmax 13 (8192) | |
[ 1.0000000] nvme0: mpsmin 12 (4096) | |
[ 1.0000000] nvme0: css 1 | |
[ 1.0000000] nvme0: nssrs 68719476736 | |
[ 1.0000000] nvme0: dstrd 4 | |
[ 1.0000000] nvme0: to 120000 msec | |
[ 1.0000000] nvme0: ams 0 | |
[ 1.0000000] nvme0: cqr 65536 | |
[ 1.0000000] nvme0: mqes 16384 | |
[ 1.0000000] nvme0: vs 0x10300 | |
[ 1.0000000] nvme0: cc 0x0000 | |
[ 1.0000000] nvme0: iocqes 0 (1) | |
[ 1.0000000] nvme0: iosqes 0 (1) | |
[ 1.0000000] nvme0: shn 0 | |
[ 1.0000000] nvme0: ams 0 | |
[ 1.0000000] nvme0: mps 12 (4096) | |
[ 1.0000000] nvme0: css 0 | |
[ 1.0000000] nvme0: en 0 | |
[ 1.0000000] nvme0: csts 0x00000000 | |
[ 1.0000000] nvme0: rdy 0 | |
[ 1.0000000] nvme0: cfs 0 | |
[ 1.0000000] nvme0: shst 0 | |
[ 1.0000000] nvme0: aqa 0x00000000 | |
[ 1.0000000] nvme0: acqs 0 | |
[ 1.0000000] nvme0: asqs 0 | |
[ 1.0000000] nvme0: asq 0x0000000000000000 | |
[ 1.0000000] nvme0: acq 0x0000000000000000 | |
[ 1.0000000] nvme0: interrupting at dec 6600 irq 43 | |
[ 1.0000000] nvme0: HP SSD EX920 1TB, firmware 32A0T2IA, serial HBSE40122500068 | |
[ 1.0000000] ld0 at nvme0 nsid 1 | |
[ 1.0000000] ld0: 953 GB, 124519 cyl, 255 head, 63 sec, 512 bytes/sect x 2000409264 sectors | |
[ 1.0000000] ppb2 at pci0 dev 17 function 0: Pericom Semiconductors PI7C9X111SL PCIe to PCI Reverse Bridge (rev. 0x02) | |
[ 1.0000000] ppb2: PCI Express capability version 1 <PCI/PCI-X to PCI-E Bridge> x1 @ 2.5GT/s | |
[ 1.0000000] pci3 at ppb2 bus 4 | |
[ 1.0000000] pci3: i/o space, memory space enabled, rd/line, wr/inv ok | |
[ 1.0000000] twa0 at pci3 dev 0 function 0: 3ware 9650SE series (rev. 0x01) | |
[ 1.0000000] twa0: 64-bit DMA addressing active | |
[ 1.0000000] twa0: interrupting at dec 6600 irq 47 | |
[ 1.0000000] twa0: 2 ports, Firmware FE9X 4.10.00.007, BIOS BE9X 4.08.00.002 | |
[ 1.0000000] twa0: Monitor BL9X 3.08.00.001, PCB Rev 032 , Achip 1.90 , Pchip 2.00 | |
[ 1.0000000] twa0: port 1: WDC WDS500G1R0A-68A4W0 476940 MB | |
[ 1.0000000] twa0: AMCC 9650SE-2LP DISK 4.1002A00D0B6D9E9F001667 | |
[ 1.0000000] ld1 at twa0 unit 0 | |
[ 1.0000000] ld1: 465 GB, 60786 cyl, 255 head, 63 sec, 512 bytes/sect x 976541696 sectors | |
[ 1.0000000] isa0 at sio0 | |
[ 1.0000000] lpt0 at isa0 port 0x3bc-0x3bf irq 7 | |
[ 1.0000000] com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, 1-byte FIFO | |
[ 1.0000000] com0: console | |
[ 1.0000000] com1 at isa0 port 0x2f8-0x2ff irq 3: ns16550a, 1-byte FIFO | |
[ 1.0000000] pckbc0 at isa0 port 0x60-0x64 | |
[ 1.0000000] attimer0 at isa0 port 0x40-0x43 | |
[ 1.0000000] pcppi0 at isa0 port 0x61 | |
[ 1.0000000] spkr0 at pcppi0: PC Speaker | |
[ 1.0000000] wsbell at spkr0 not configured | |
[ 1.0000000] midi0 at pcppi0: PC speaker | |
[ 1.0000000] isabeep0 at pcppi0 | |
[ 1.0000000] fdc0 at isa0 port 0x3f0-0x3f7 irq 6 drq 2 | |
[ 1.0000000] mcclock0 at isa0 port 0x70-0x71: mc146818 compatible time-of-day clock | |
[ 1.0000000] attimer0: attached to pcppi0 | |
[ 1.0000000] tsciic0 at tsc0 | |
[ 1.0000000] iic0 at tsciic0: I2C bus | |
~Stopped in pid 0.6 (system) at netbsd:cpu_Debugger+0x4: ret zero,(ra | |
) | |
db{0}> bt | |
cpu_Debugger() at netbsd:cpu_Debugger+0x4 | |
comintr.part.0() at netbsd:comintr.part.0+0xb74 | |
alpha_shared_intr_wrapper() at netbsd:alpha_shared_intr_wrapper+0x38 | |
alpha_shared_intr_dispatch() at netbsd:alpha_shared_intr_dispatch+0x5c | |
sio_iointr() at netbsd:sio_iointr+0x48 | |
interrupt() at netbsd:interrupt+0x258 | |
XentInt() at netbsd:XentInt+0x1c | |
--- interrupt (from ipl 2) --- | |
spllower() at netbsd:spllower+0x28 | |
softint_dispatch() at netbsd:softint_dispatch+0xf8 | |
alpha_softint_switchto() at netbsd:alpha_softint_switchto+0x60 | |
db{0}> c |
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment