Skip to content

Instantly share code, notes, and snippets.

@rokuyama

rokuyama/dmesg_dht_20220504.txt

Created May 4, 2022 06:20
Show Gist options
  • Star 0 You must be signed in to star a gist
  • Fork 0 You must be signed in to fork a gist
  • Save rokuyama/eec1996dedd7422a30936aa9b56f0eba to your computer and use it in GitHub Desktop.
Save rokuyama/eec1996dedd7422a30936aa9b56f0eba to your computer and use it in GitHub Desktop.
Download ZIP
Raw
dmesg_dht_20220504.txt
U-Boot 1.1.4 (Feb 16 2006 - 17:15:06)
CPU: AMCC PowerPC 405GP Rev. E at 266.640 MHz (PLB=66, OPB=33, EBC=33 MHz)
Internal PCI arbiter enabled, PCI async ext clock used
16 kB I-Cache 8 kB D-Cache
Board: DHT Walnut
I2C: ready
DRAM: 128 MB
FLASH: 512 kB
PCI: Bus Dev VenId DevId Class Int
01 00 144d a800 0106 1d
00 02 12d8 e111 0604 1b
00 03 8086 1076 0200 1c
00 04 105a 0d30 0101 1d
In: serial
Out: serial
Err: serial
Net: ppc_4xx_eth0
IDE: Bus 0: OK
Device 0: not available
Device 1: not available
BEDBUG:ready
Hit any key to stop autoboot: 0
ENET Speed is 100 Mbps - FULL duplex connection
Using ppc_4xx_eth0 device
TFTP from server 192.168.10.128; our IP address is 192.168.10.180
Filename 'dht.bin'.
Load address: 0x100000
Loading: #################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
######################
done
Bytes transferred = 7097584 (6c4cf0 hex)
## Starting application at 0x00100000 ...
[ 1.0000000] +8000000,
[ 1.0000000] 00100000-08000000 -> 007f4000-08000000 = 780c000
[ 1.0000000] [ Kernel symbol table missing! ]
[ 1.0000000] Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
[ 1.0000000] 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017,
[ 1.0000000] 2018, 2019, 2020, 2021, 2022
[ 1.0000000] The NetBSD Foundation, Inc. All rights reserved.
[ 1.0000000] Copyright (c) 1982, 1986, 1989, 1991, 1993
[ 1.0000000] The Regents of the University of California. All rights reserved.
[ 1.0000000] NetBSD 9.99.96 (DHT) #0: Wed May 4 15:17:26 JST 2022
[ 1.0000000] rin@latipes:/build/src/sys/arch/evbppc/compile/DHT
[ 1.0000000] Model: DHT Walnut 405GP Evaluation Board
[ 1.0000000] total memory = 128 MB
[ 1.0000000] avail memory = 119 MB
[ 1.0000000] plb0 (root)
[ 1.0000000] cpu0 at plb0: 267MHz 405GP (PVR 0x40110145)
[ 1.0000000] cpu0: 16KB/32B L1 instruction cache
[ 1.0000000] cpu0: 8KB/32B L1 data cache
[ 1.0000000] ecc0 at plb0 irq 17: ECC controller
[ 1.0000000] opb0 at plb0
[ 1.0000000] com0 at opb0 addr 0xef600300 irq 0: ns16550a, 16-byte FIFO
[ 1.0000000] com0: console
[ 1.0000000] com1 at opb0 addr 0xef600400 irq 1: ns16550a, 16-byte FIFO
[ 1.0000000] emac0 at opb0 addr 0xef600800 irq 15: Ethernet Media Access Controller
[ 1.0000000] emac0: Ethernet address de:ad:be:ef:00:00
[ 1.0000000] nsphyter0 at emac0 phy 9: DP83843 10/100 media interface, rev. 0
[ 1.0000000] nsphyter0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
[ 1.0000000] opbgpio0 at opb0 addr 0xef600700: On-Chip GPIO controller
[ 1.0000000] gpio0 at opbgpio0: 24 pins
[ 1.0000000] gpiic at opb0 addr 0xef600500 irq 2 not configured
[ 1.0000000] wdog0 at opb0: 4 second period
[ 1.0000000] pchb0 at plb0
[ 1.0000000] pchb0: IBM PPC 405GP PCI Bridge (rev. 0x01)
[ 1.0000000] pci0 at pchb0
[ 1.0000000] IBM PPC 405GP PCI Bridge (host bridge, revision 0x01) at pci0 dev 0 function 0 not configured
[ 1.0000000] ppb0 at pci0 dev 2 function 0: Pericom Semiconductors PI7C9X111SL PCIe to PCI Reverse Bridge (rev. 0x02)
[ 1.0000000] ppb0: PCI Express capability version 1 <PCI/PCI-X to PCI-E Bridge> x1 @ 2.5GT/s
[ 1.0000000] pci1 at ppb0 bus 1
[ 1.0000000] ahcisata0 at pci1 dev 0 function 0: Samsung Electronics (3rd vendor ID) XP941 M.2 SSD (rev. 0x01)
[ 1.0000000] ahcisata0: AHCI revision 1.30, 1 port, 32 slots, CAP 0xc3349f80<CCCS,PMD,SAM,ISS=0x3=Gen3,SCLO,SAL,SNCQ,S64A>
[ 1.0000000] ahcisata0: interrupting at irq 29
[ 1.0000000] atabus0 at ahcisata0 channel 0
[ 1.0000000] wm0 at pci0 dev 3 function 0: Intel i82541GI 1000BASE-T Ethernet (rev. 0x05)
[ 1.0000000] wm0: WARNING: I/O BAR at zero.
[ 1.0000000] wm0: interrupting at irq 30
[ 1.0000000] wm0: Ethernet address 00:13:15:ff:fc:fd
[ 1.0000000] igphy0 at wm0 phy 1: Intel IGP01E1000 Gigabit PHY, rev. 0
[ 1.0000000] igphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
[ 1.0000000] pdcide0 at pci0 dev 4 function 0: Promise Ultra100/ATA Bus Master IDE Accelerator (rev. 0x02)
[ 1.0000000] pdcide0: using irq 31 for native-PCI interrupt
[ 1.0000000] atabus1 at pdcide0 channel 0
[ 1.0000000] atabus2 at pdcide0 channel 1
[ 1.0000000] vmmask 7cf00000 schedmask 7cf00000 highmask 7ff80000
[ 1.0000000] WARNING: system needs entropy for security; see entropy(7)
[ 1.0000000] Setting PIT to 266666666/100 = 2666666
[ 1.0999263] ahcisata0 port 0: device present, speed: 6.0Gb/s
[ 1.1399313] wd0 at atabus0 drive 0
[ 1.1399313] wd0: <SAMSUNG MZHPU512HCGL-00004>
[ 1.1399313] wd0: 476 GB, 992277 cyl, 16 head, 63 sec, 512 bytes/sect x 1000215216 sectors
[ 1.1599735] WARNING: 1 error while detecting hardware; check system log.
[ 1.1599735] root on wd0a dumps on wd0b
[ 1.1799758] kern.module.path=/stand/evbppc/9.99.96/modules
[ 1.1799758] WARNING: no TOD clock present
[ 1.1799758] WARNING: using filesystem time
[ 1.1948472] WARNING: CHECK AND RESET THE DATE!
Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment