Created
September 16, 2021 07:28
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
[ 1.0000000] Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, | |
[ 1.0000000] 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, | |
[ 1.0000000] 2018, 2019, 2020, 2021 The NetBSD Foundation, Inc. All rights reserved. | |
[ 1.0000000] Copyright (c) 1982, 1986, 1989, 1991, 1993 | |
[ 1.0000000] The Regents of the University of California. All rights reserved. | |
[ 1.0000000] NetBSD 9.99.88 (DHT) #249: Mon Sep 13 21:29:49 JST 2021 | |
[ 1.0000000] rin@latipes:/sys/arch/evbppc/compile/DHT | |
[ 1.0000000] Model: DHT Walnut 405GP Evaluation Board | |
[ 1.0000000] total memory = 128 MB | |
[ 1.0000000] avail memory = 118 MB | |
[ 1.0000000] plb0 (root) | |
[ 1.0000000] cpu0 at plb0: 267MHz 405GP (PVR 0x40110145) | |
[ 1.0000000] cpu0: 16KB/32B L1 instruction cache | |
[ 1.0000000] cpu0: 8KB/32B L1 data cache | |
[ 1.0000000] ecc0 at plb0 irq 17: ECC controller | |
[ 1.0000000] opb0 at plb0 | |
[ 1.0000000] com0 at opb0 addr 0xef600300 irq 0: ns16550a, 1-byte FIFO | |
[ 1.0000000] com0: console | |
[ 1.0000000] com1 at opb0 addr 0xef600400 irq 1: ns16550a, 1-byte FIFO | |
[ 1.0000000] emac0 at opb0 addr 0xef600800 irq 15: Ethernet Media Access Controller | |
[ 1.0000000] emac0: Ethernet address de:ad:be:ef:00:00 | |
[ 1.0000000] nsphyter0 at emac0 phy 9: DP83843 10/100 media interface, rev. 0 | |
[ 1.0000000] nsphyter0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto | |
[ 1.0000000] opbgpio0 at opb0 addr 0xef600700: On-Chip GPIO controller | |
[ 1.0000000] gpio0 at opbgpio0: 24 pins | |
[ 1.0000000] gpiic at opb0 addr 0xef600500 irq 2 not configured | |
[ 1.0000000] wdog0 at opb0: 4 second period | |
[ 1.0000000] pchb0 at plb0 | |
[ 1.0000000] pchb0: IBM PPC 405GP PCI Bridge (rev. 0x01) | |
[ 1.0000000] pci0 at pchb0 | |
[ 1.0000000] IBM PPC 405GP PCI Bridge (host bridge, revision 0x01) at pci0 dev 0 function 0 not configured | |
[ 1.0000000] ppb0 at pci0 dev 2 function 0: Pericom Semiconductors PI7C9X111SL PCIe to PCI Reverse Bridge (rev. 0x02) | |
[ 1.0000000] ppb0: PCI Express capability version 1 <PCI/PCI-X to PCI-E Bridge> x1 @ 2.5GT/s | |
[ 1.0000000] pci1 at ppb0 bus 1 | |
[ 1.0000000] ahcisata0 at pci1 dev 0 function 0: Samsung Electronics (3rd vendor ID) XP941 M.2 SSD (rev. 0x01) | |
[ 1.0000000] ahcisata0: AHCI revision 1.30, 1 port, 32 slots, CAP 0xc3349f80<CCCS,PMD,SAM,ISS=0x3=Gen3,SCLO,SAL,SNCQ,S64A> | |
[ 1.0000000] ahcisata0: interrupting at irq 29 | |
[ 1.0000000] atabus0 at ahcisata0 channel 0 | |
[ 1.0000000] ppb1 at pci0 dev 3 function 0: Pericom Semiconductors PI7C9X111SL PCIe to PCI Reverse Bridge (rev. 0x02) | |
[ 1.0000000] ppb1: PCI Express capability version 1 <PCI/PCI-X to PCI-E Bridge> x1 @ 2.5GT/s | |
[ 1.0000000] pci2 at ppb1 bus 2 | |
[ 1.0000000] nvme0 at pci2 dev 0 function 0: vendor 1dee product 2262 (rev. 0x03) | |
[ 1.0000000] nvme0: NVMe 1.3 | |
[ 1.0000000] nvme0: cap 0x00100030f0013fff | |
[ 1.0000000] nvme0: mpsmax 13 (8192) | |
[ 1.0000000] nvme0: mpsmin 12 (4096) | |
[ 1.0000000] nvme0: css 1 | |
[ 1.0000000] nvme0: nssrs 68719476736 | |
[ 1.0000000] nvme0: dstrd 4 | |
[ 1.0000000] nvme0: to 120000 msec | |
[ 1.0000000] nvme0: ams 0 | |
[ 1.0000000] nvme0: cqr 65536 | |
[ 1.0000000] nvme0: mqes 16384 | |
[ 1.0000000] nvme0: vs 0x10300 | |
[ 1.0000000] nvme0: cc 0x0080 | |
[ 1.0000000] nvme0: iocqes 0 (1) | |
[ 1.0000000] nvme0: iosqes 0 (1) | |
[ 1.0000000] nvme0: shn 0 | |
[ 1.0000000] nvme0: ams 0 | |
[ 1.0000000] nvme0: mps 13 (8192) | |
[ 1.0000000] nvme0: css 0 | |
[ 1.0000000] nvme0: en 0 | |
[ 1.0000000] nvme0: csts 0x00000000 | |
[ 1.0000000] nvme0: rdy 0 | |
[ 1.0000000] nvme0: cfs 0 | |
[ 1.0000000] nvme0: shst 0 | |
[ 1.0000000] nvme0: aqa 0x001f001f | |
[ 1.0000000] nvme0: acqs 31 | |
[ 1.0000000] nvme0: asqs 31 | |
[ 1.0000000] nvme0: asq 0x00000000008fc000 | |
[ 1.0000000] nvme0: acq 0x0000000000900000 | |
[ 1.0000000] nvme0: interrupting at irq 30 | |
[ 1.0000000] nvme0: HP SSD EX920 1TB, firmware 32A0T2IA, serial HBSE40122500068 | |
[ 1.0000000] panic: kernel diagnostic assertion "(state->done) == nvme_ns_io_done || (state->done) == nvme_ns_sync_done || (state->done) == nvme_getcache_done || (state->done) == nvme_setcache_done || (state->done) == nvme_pt_done || (state->done) == nvme_poll_done || (state->done) == nvme_empty_done" failed: file "../../../../dev/ic/nvme.c", line 1440 unknown done callback 0x7ea4000 | |
[ 1.0000000] cpu0: Begin traceback... | |
[ 1.0000000] 0x0080b3e0: at vpanic+0x12c | |
[ 1.0000000] 0x0080b410: at kern_assert+0x60 | |
[ 1.0000000] 0x0080b450: at nvme_poll_done+0xec | |
[ 1.0000000] 0x0080b470: at nvme_q_complete+0x254 | |
[ 1.0000000] 0x0080b4c0: at nvme_poll+0xe0 | |
[ 1.0000000] 0x0080b560: at nvme_q_create+0x140 | |
[ 1.0000000] 0x0080b5c0: at nvme_attach+0x7dc | |
[ 1.0000000] 0x0080b690: at nvme_pci_attach+0x2c0 | |
[ 1.0000000] 0x0080b6d0: at config_attach_internal+0x204 | |
[ 1.0000000] 0x0080b700: at config_found+0x68 | |
[ 1.0000000] 0x0080b740: at pci_probe_device+0x654 | |
[ 1.0000000] 0x0080b810: at pci_enumerate_bus+0x204 | |
[ 1.0000000] 0x0080b890: at pcirescan+0x60 | |
[ 1.0000000] 0x0080b8b0: at pciattach+0x178 | |
[ 1.0000000] 0x0080b8d0: at config_attach_internal+0x204 | |
[ 1.0000000] 0x0080b900: at config_found+0x68 | |
[ 1.0000000] 0x0080b940: at ppbattach+0x310 | |
[ 1.0000000] 0x0080b9c0: at config_attach_internal+0x204 | |
[ 1.0000000] 0x0080b9f0: at config_found+0x68 | |
[ 1.0000000] 0x0080ba30: at pci_probe_device+0x654 | |
[ 1.0000000] 0x0080bb00: at pci_enumerate_bus+0x204 | |
[ 1.0000000] 0x0080bb80: at pcirescan+0x60 | |
[ 1.0000000] 0x0080bba0: at pciattach+0x178 | |
[ 1.0000000] 0x0080bbc0: at config_attach_internal+0x204 | |
[ 1.0000000] 0x0080bbf0: at config_found+0x68 | |
[ 1.0000000] 0x0080bc30: at pchbattach+0x1b8 | |
[ 1.0000000] 0x0080bd90: at config_attach_internal+0x204 | |
[ 1.0000000] 0x0080bdc0: at config_found+0x68 | |
[ 1.0000000] 0x0080be00: at plb_attach+0xc4 | |
[ 1.0000000] 0x0080be40: at config_attach_internal+0x204 | |
[ 1.0000000] 0x0080be70: at config_rootfound+0x78 | |
[ 1.0000000] 0x0080beb0: at cpu_configure+0x2c | |
[ 1.0000000] 0x0080bec0: at main+0x2a0 | |
[ 1.0000000] 0x0080bf10: at 0x100104 | |
[ 1.0000000] cpu0: End traceback... | |
Stopped in pid 0.0 (system) at netbsd:vpanic+0x130: or r3, r26, r26 | |
db> |
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment