Skip to content

Instantly share code, notes, and snippets.

@romatou18

romatou18/HardwareSerial.cpp

Forked from shaielc/HardwareSerial.cpp
Created March 12, 2020 23:51
Show Gist options
  • Save romatou18/acc3e7bc4e8287ecb5b7ef60dba360f9 to your computer and use it in GitHub Desktop.
Save romatou18/acc3e7bc4e8287ecb5b7ef60dba360f9 to your computer and use it in GitHub Desktop.
Download ZIP
interrupt extension for UART
Raw
esp32-hal-uart.c
// Copyright 2015-2016 Espressif Systems (Shanghai) PTE LTD
//
// Licensed under the Apache License, Version 2.0 (the "License");
// you may not use this file except in compliance with the License.
// You may obtain a copy of the License at
// http://www.apache.org/licenses/LICENSE-2.0
//
// Unless required by applicable law or agreed to in writing, software
// distributed under the License is distributed on an "AS IS" BASIS,
// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
// See the License for the specific language governing permissions and
// limitations under the License.
#include "esp32-hal-uart.h"
#include "esp32-hal.h"
#include "freertos/FreeRTOS.h"
#include "freertos/task.h"
#include "freertos/queue.h"
#include "freertos/semphr.h"
#include "rom/ets_sys.h"
#include "esp_attr.h"
#include "esp_intr.h"
#include "rom/uart.h"
#include "soc/uart_reg.h"
#include "soc/uart_struct.h"
#include "soc/io_mux_reg.h"
#include "soc/gpio_sig_map.h"
#include "soc/dport_reg.h"
#include "esp_intr_alloc.h"
#define UART_REG_BASE(u) ((u==0)?DR_REG_UART_BASE:( (u==1)?DR_REG_UART1_BASE:( (u==2)?DR_REG_UART2_BASE:0)))
#define UART_RXD_IDX(u) ((u==0)?U0RXD_IN_IDX:( (u==1)?U1RXD_IN_IDX:( (u==2)?U2RXD_IN_IDX:0)))
#define UART_TXD_IDX(u) ((u==0)?U0TXD_OUT_IDX:( (u==1)?U1TXD_OUT_IDX:( (u==2)?U2TXD_OUT_IDX:0)))
#define UART_INTR_SOURCE(u) ((u==0)?ETS_UART0_INTR_SOURCE:( (u==1)?ETS_UART1_INTR_SOURCE:((u==2)?ETS_UART2_INTR_SOURCE:0)))
static int s_uart_debug_nr = 0;
struct uart_struct_t {
uart_dev_t * dev;
#if !CONFIG_DISABLE_HAL_LOCKS
xSemaphoreHandle lock;
#endif
uint8_t num;
xQueueHandle queue;
intr_handle_t intr_handle;
};
#if CONFIG_DISABLE_HAL_LOCKS
#define UART_MUTEX_LOCK()
#define UART_MUTEX_UNLOCK()
static uart_t _uart_bus_array[3] = {
{(volatile uart_dev_t *)(DR_REG_UART_BASE), 0, NULL, NULL},
{(volatile uart_dev_t *)(DR_REG_UART1_BASE), 1, NULL, NULL},
{(volatile uart_dev_t *)(DR_REG_UART2_BASE), 2, NULL, NULL}
};
#else
#define UART_MUTEX_LOCK() do {} while (xSemaphoreTake(uart->lock, portMAX_DELAY) != pdPASS)
#define UART_MUTEX_UNLOCK() xSemaphoreGive(uart->lock)
static uart_t _uart_bus_array[3] = {
{(volatile uart_dev_t *)(DR_REG_UART_BASE), NULL, 0, NULL, NULL},
{(volatile uart_dev_t *)(DR_REG_UART1_BASE), NULL, 1, NULL, NULL},
{(volatile uart_dev_t *)(DR_REG_UART2_BASE), NULL, 2, NULL, NULL}
};
#endif
static void IRAM_ATTR _uart_isr(void *arg)
{
uint8_t i, c;
BaseType_t xHigherPriorityTaskWoken;
uart_t* uart;
if(arg != NULL)
(*((void(**)())arg))();
for(i=0;i<3;i++){
uart = &_uart_bus_array[i];
if(uart->intr_handle == NULL){
continue;
}
uart->dev->int_clr.rxfifo_full = 1;
uart->dev->int_clr.frm_err = 1;
uart->dev->int_clr.rxfifo_tout = 1;
while(uart->dev->status.rxfifo_cnt) {
c = uart->dev->fifo.rw_byte;
if(uart->queue != NULL && !xQueueIsQueueFullFromISR(uart->queue)) {
xQueueSendFromISR(uart->queue, &c, &xHigherPriorityTaskWoken);
}
}
}
if (xHigherPriorityTaskWoken) {
portYIELD_FROM_ISR();
}
}
void uartEnableInterrupt(uart_t* uart,void * func)
{
UART_MUTEX_LOCK();
uart->dev->conf1.rxfifo_full_thrhd = 112;
uart->dev->conf1.rx_tout_thrhd = 2;
uart->dev->conf1.rx_tout_en = 1;
uart->dev->int_ena.rxfifo_full = 1;
uart->dev->int_ena.frm_err = 1;
uart->dev->int_ena.rxfifo_tout = 1;
uart->dev->int_clr.val = 0xffffffff;
esp_intr_alloc(UART_INTR_SOURCE(uart->num), (int)ESP_INTR_FLAG_IRAM, _uart_isr, func, &uart->intr_handle);
UART_MUTEX_UNLOCK();
}
void uartDisableInterrupt(uart_t* uart)
{
UART_MUTEX_LOCK();
uart->dev->conf1.val = 0;
uart->dev->int_ena.val = 0;
uart->dev->int_clr.val = 0xffffffff;
esp_intr_free(uart->intr_handle);
uart->intr_handle = NULL;
UART_MUTEX_UNLOCK();
}
void uartDetachRx(uart_t* uart)
{
if(uart == NULL) {
return;
}
pinMatrixInDetach(UART_RXD_IDX(uart->num), false, false);
uartDisableInterrupt(uart);
}
void uartDetachTx(uart_t* uart)
{
if(uart == NULL) {
return;
}
pinMatrixOutDetach(UART_TXD_IDX(uart->num), false, false);
}
void uartAttachRx(uart_t* uart, uint8_t rxPin, bool inverted)
{
if(uart == NULL || rxPin > 39) {
return;
}
pinMode(rxPin, INPUT);
pinMatrixInAttach(rxPin, UART_RXD_IDX(uart->num), inverted);
uartEnableInterrupt(uart,NULL);
}
void uartAttachTx(uart_t* uart, uint8_t txPin, bool inverted)
{
if(uart == NULL || txPin > 39) {
return;
}
pinMode(txPin, OUTPUT);
pinMatrixOutAttach(txPin, UART_TXD_IDX(uart->num), inverted, false);
}
uart_t* uartBegin(uint8_t uart_nr, uint32_t baudrate, uint32_t config, int8_t rxPin, int8_t txPin, uint16_t queueLen, bool inverted)
{
if(uart_nr > 2) {
return NULL;
}
if(rxPin == -1 && txPin == -1) {
return NULL;
}
uart_t* uart = &_uart_bus_array[uart_nr];
#if !CONFIG_DISABLE_HAL_LOCKS
if(uart->lock == NULL) {
uart->lock = xSemaphoreCreateMutex();
if(uart->lock == NULL) {
return NULL;
}
}
#endif
if(queueLen && uart->queue == NULL) {
uart->queue = xQueueCreate(queueLen, sizeof(uint8_t)); //initialize the queue
if(uart->queue == NULL) {
return NULL;
}
}
if(uart_nr == 1){
DPORT_SET_PERI_REG_MASK(DPORT_PERIP_CLK_EN_REG, DPORT_UART1_CLK_EN);
DPORT_CLEAR_PERI_REG_MASK(DPORT_PERIP_RST_EN_REG, DPORT_UART1_RST);
} else if(uart_nr == 2){
DPORT_SET_PERI_REG_MASK(DPORT_PERIP_CLK_EN_REG, DPORT_UART2_CLK_EN);
DPORT_CLEAR_PERI_REG_MASK(DPORT_PERIP_RST_EN_REG, DPORT_UART2_RST);
} else {
DPORT_SET_PERI_REG_MASK(DPORT_PERIP_CLK_EN_REG, DPORT_UART_CLK_EN);
DPORT_CLEAR_PERI_REG_MASK(DPORT_PERIP_RST_EN_REG, DPORT_UART_RST);
}
uartFlush(uart);
uartSetBaudRate(uart, baudrate);
UART_MUTEX_LOCK();
uart->dev->conf0.val = config;
#define TWO_STOP_BITS_CONF 0x3
#define ONE_STOP_BITS_CONF 0x1
if ( uart->dev->conf0.stop_bit_num == TWO_STOP_BITS_CONF) {
uart->dev->conf0.stop_bit_num = ONE_STOP_BITS_CONF;
uart->dev->rs485_conf.dl1_en = 1;
}
UART_MUTEX_UNLOCK();
if(rxPin != -1) {
uartAttachRx(uart, rxPin, inverted);
}
if(txPin != -1) {
uartAttachTx(uart, txPin, inverted);
}
return uart;
}
void uartEnd(uart_t* uart)
{
if(uart == NULL) {
return;
}
UART_MUTEX_LOCK();
if(uart->queue != NULL) {
uint8_t c;
while(xQueueReceive(uart->queue, &c, 0));
vQueueDelete(uart->queue);
uart->queue = NULL;
}
uart->dev->conf0.val = 0;
UART_MUTEX_UNLOCK();
uartDetachRx(uart);
uartDetachTx(uart);
}
uint32_t uartAvailable(uart_t* uart)
{
if(uart == NULL || uart->queue == NULL) {
return 0;
}
return uxQueueMessagesWaiting(uart->queue);
}
uint8_t uartRead(uart_t* uart)
{
if(uart == NULL || uart->queue == NULL) {
return 0;
}
uint8_t c;
if(xQueueReceive(uart->queue, &c, 0)) {
return c;
}
return 0;
}
uint8_t uartPeek(uart_t* uart)
{
if(uart == NULL || uart->queue == NULL) {
return 0;
}
uint8_t c;
if(xQueuePeek(uart->queue, &c, 0)) {
return c;
}
return 0;
}
void uartWrite(uart_t* uart, uint8_t c)
{
if(uart == NULL) {
return;
}
UART_MUTEX_LOCK();
while(uart->dev->status.txfifo_cnt == 0x7F);
uart->dev->fifo.rw_byte = c;
UART_MUTEX_UNLOCK();
}
void uartWriteBuf(uart_t* uart, const uint8_t * data, size_t len)
{
if(uart == NULL) {
return;
}
UART_MUTEX_LOCK();
while(len) {
while(len && uart->dev->status.txfifo_cnt < 0x7F) {
uart->dev->fifo.rw_byte = *data++;
len--;
}
}
UART_MUTEX_UNLOCK();
}
void uartFlush(uart_t* uart)
{
if(uart == NULL) {
return;
}
UART_MUTEX_LOCK();
while(uart->dev->status.txfifo_cnt);
uart->dev->conf0.txfifo_rst = 1;
uart->dev->conf0.txfifo_rst = 0;
uart->dev->conf0.rxfifo_rst = 1;
uart->dev->conf0.rxfifo_rst = 0;
UART_MUTEX_UNLOCK();
}
void uartSetBaudRate(uart_t* uart, uint32_t baud_rate)
{
if(uart == NULL) {
return;
}
UART_MUTEX_LOCK();
uint32_t clk_div = ((UART_CLK_FREQ<<4)/baud_rate);
uart->dev->clk_div.div_int = clk_div>>4 ;
uart->dev->clk_div.div_frag = clk_div & 0xf;
UART_MUTEX_UNLOCK();
}
uint32_t uartGetBaudRate(uart_t* uart)
{
if(uart == NULL) {
return 0;
}
uint32_t clk_div = (uart->dev->clk_div.div_int << 4) | (uart->dev->clk_div.div_frag & 0x0F);
return ((UART_CLK_FREQ<<4)/clk_div);
}
static void IRAM_ATTR uart0_write_char(char c)
{
while(((ESP_REG(0x01C+DR_REG_UART_BASE) >> UART_TXFIFO_CNT_S) & 0x7F) == 0x7F);
ESP_REG(DR_REG_UART_BASE) = c;
}
static void IRAM_ATTR uart1_write_char(char c)
{
while(((ESP_REG(0x01C+DR_REG_UART1_BASE) >> UART_TXFIFO_CNT_S) & 0x7F) == 0x7F);
ESP_REG(DR_REG_UART1_BASE) = c;
}
static void IRAM_ATTR uart2_write_char(char c)
{
while(((ESP_REG(0x01C+DR_REG_UART2_BASE) >> UART_TXFIFO_CNT_S) & 0x7F) == 0x7F);
ESP_REG(DR_REG_UART2_BASE) = c;
}
void uartSetDebug(uart_t* uart)
{
if(uart == NULL || uart->num > 2) {
s_uart_debug_nr = -1;
ets_install_putc1(NULL);
return;
}
if(s_uart_debug_nr == uart->num) {
return;
}
s_uart_debug_nr = uart->num;
switch(s_uart_debug_nr) {
case 0:
ets_install_putc1((void (*)(char)) &uart0_write_char);
break;
case 1:
ets_install_putc1((void (*)(char)) &uart1_write_char);
break;
case 2:
ets_install_putc1((void (*)(char)) &uart2_write_char);
break;
default:
ets_install_putc1(NULL);
break;
}
}
int uartGetDebug()
{
return s_uart_debug_nr;
}
int log_printf(const char *format, ...)
{
if(s_uart_debug_nr < 0){
return 0;
}
static char loc_buf[64];
char * temp = loc_buf;
int len;
va_list arg;
va_list copy;
va_start(arg, format);
va_copy(copy, arg);
len = vsnprintf(NULL, 0, format, arg);
va_end(copy);
if(len >= sizeof(loc_buf)){
temp = (char*)malloc(len+1);
if(temp == NULL) {
return 0;
}
}
vsnprintf(temp, len+1, format, arg);
#if !CONFIG_DISABLE_HAL_LOCKS
if(_uart_bus_array[s_uart_debug_nr].lock){
while (xSemaphoreTake(_uart_bus_array[s_uart_debug_nr].lock, portMAX_DELAY) != pdPASS);
ets_printf("%s", temp);
xSemaphoreGive(_uart_bus_array[s_uart_debug_nr].lock);
} else {
ets_printf("%s", temp);
}
#else
ets_printf("%s", temp);
#endif
va_end(arg);
if(len > 64){
free(temp);
}
return len;
}
Raw
esp32-hal-uart.h
// Copyright 2015-2016 Espressif Systems (Shanghai) PTE LTD
//
// Licensed under the Apache License, Version 2.0 (the "License");
// you may not use this file except in compliance with the License.
// You may obtain a copy of the License at
// http://www.apache.org/licenses/LICENSE-2.0
//
// Unless required by applicable law or agreed to in writing, software
// distributed under the License is distributed on an "AS IS" BASIS,
// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
// See the License for the specific language governing permissions and
// limitations under the License.
#ifndef MAIN_ESP32_HAL_UART_H_
#define MAIN_ESP32_HAL_UART_H_
#ifdef __cplusplus
extern "C" {
#endif
#include <stdint.h>
#include <stdbool.h>
#include <stdlib.h>
#define SERIAL_5N1 0x8000010
#define SERIAL_6N1 0x8000014
#define SERIAL_7N1 0x8000018
#define SERIAL_8N1 0x800001c
#define SERIAL_5N2 0x8000030
#define SERIAL_6N2 0x8000034
#define SERIAL_7N2 0x8000038
#define SERIAL_8N2 0x800003c
#define SERIAL_5E1 0x8000012
#define SERIAL_6E1 0x8000016
#define SERIAL_7E1 0x800001a
#define SERIAL_8E1 0x800001e
#define SERIAL_5E2 0x8000032
#define SERIAL_6E2 0x8000036
#define SERIAL_7E2 0x800003a
#define SERIAL_8E2 0x800003e
#define SERIAL_5O1 0x8000013
#define SERIAL_6O1 0x8000017
#define SERIAL_7O1 0x800001b
#define SERIAL_8O1 0x800001f
#define SERIAL_5O2 0x8000033
#define SERIAL_6O2 0x8000037
#define SERIAL_7O2 0x800003b
#define SERIAL_8O2 0x800003f
struct uart_struct_t;
typedef struct uart_struct_t uart_t;
uart_t* uartBegin(uint8_t uart_nr, uint32_t baudrate, uint32_t config, int8_t rxPin, int8_t txPin, uint16_t queueLen, bool inverted);
void uartEnd(uart_t* uart);
uint32_t uartAvailable(uart_t* uart);
uint8_t uartRead(uart_t* uart);
uint8_t uartPeek(uart_t* uart);
void uartWrite(uart_t* uart, uint8_t c);
void uartWriteBuf(uart_t* uart, const uint8_t * data, size_t len);
void uartFlush(uart_t* uart);
void uartSetBaudRate(uart_t* uart, uint32_t baud_rate);
uint32_t uartGetBaudRate(uart_t* uart);
void uartSetDebug(uart_t* uart);
int uartGetDebug();
#ifdef __cplusplus
}
#endif
void uartDisableInterrupt(uart_t* uart);
void uartEnableInterrupt(uart_t* uart,void * func );
#endif /* MAIN_ESP32_HAL_UART_H_ */
Raw
gistfile1.txt
// Copyright 2015-2016 Espressif Systems (Shanghai) PTE LTD
//
// Licensed under the Apache License, Version 2.0 (the "License");
// you may not use this file except in compliance with the License.
// You may obtain a copy of the License at
// http://www.apache.org/licenses/LICENSE-2.0
//
// Unless required by applicable law or agreed to in writing, software
// distributed under the License is distributed on an "AS IS" BASIS,
// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
// See the License for the specific language governing permissions and
// limitations under the License.
#include "esp32-hal-uart.h"
#include "esp32-hal.h"
#include "freertos/FreeRTOS.h"
#include "freertos/task.h"
#include "freertos/queue.h"
#include "freertos/semphr.h"
#include "rom/ets_sys.h"
#include "esp_attr.h"
#include "esp_intr.h"
#include "rom/uart.h"
#include "soc/uart_reg.h"
#include "soc/uart_struct.h"
#include "soc/io_mux_reg.h"
#include "soc/gpio_sig_map.h"
#include "soc/dport_reg.h"
#include "esp_intr_alloc.h"
#define UART_REG_BASE(u) ((u==0)?DR_REG_UART_BASE:( (u==1)?DR_REG_UART1_BASE:( (u==2)?DR_REG_UART2_BASE:0)))
#define UART_RXD_IDX(u) ((u==0)?U0RXD_IN_IDX:( (u==1)?U1RXD_IN_IDX:( (u==2)?U2RXD_IN_IDX:0)))
#define UART_TXD_IDX(u) ((u==0)?U0TXD_OUT_IDX:( (u==1)?U1TXD_OUT_IDX:( (u==2)?U2TXD_OUT_IDX:0)))
#define UART_INTR_SOURCE(u) ((u==0)?ETS_UART0_INTR_SOURCE:( (u==1)?ETS_UART1_INTR_SOURCE:((u==2)?ETS_UART2_INTR_SOURCE:0)))
static int s_uart_debug_nr = 0;
struct uart_struct_t {
uart_dev_t * dev;
#if !CONFIG_DISABLE_HAL_LOCKS
xSemaphoreHandle lock;
#endif
uint8_t num;
xQueueHandle queue;
intr_handle_t intr_handle;
};
#if CONFIG_DISABLE_HAL_LOCKS
#define UART_MUTEX_LOCK()
#define UART_MUTEX_UNLOCK()
static uart_t _uart_bus_array[3] = {
{(volatile uart_dev_t *)(DR_REG_UART_BASE), 0, NULL, NULL},
{(volatile uart_dev_t *)(DR_REG_UART1_BASE), 1, NULL, NULL},
{(volatile uart_dev_t *)(DR_REG_UART2_BASE), 2, NULL, NULL}
};
#else
#define UART_MUTEX_LOCK() do {} while (xSemaphoreTake(uart->lock, portMAX_DELAY) != pdPASS)
#define UART_MUTEX_UNLOCK() xSemaphoreGive(uart->lock)
static uart_t _uart_bus_array[3] = {
{(volatile uart_dev_t *)(DR_REG_UART_BASE), NULL, 0, NULL, NULL},
{(volatile uart_dev_t *)(DR_REG_UART1_BASE), NULL, 1, NULL, NULL},
{(volatile uart_dev_t *)(DR_REG_UART2_BASE), NULL, 2, NULL, NULL}
};
#endif
static void IRAM_ATTR _uart_isr(void *arg)
{
uint8_t i, c;
BaseType_t xHigherPriorityTaskWoken;
uart_t* uart;
if(arg != NULL)
(*((void(**)())arg))();
for(i=0;i<3;i++){
uart = &_uart_bus_array[i];
if(uart->intr_handle == NULL){
continue;
}
uart->dev->int_clr.rxfifo_full = 1;
uart->dev->int_clr.frm_err = 1;
uart->dev->int_clr.rxfifo_tout = 1;
while(uart->dev->status.rxfifo_cnt) {
c = uart->dev->fifo.rw_byte;
if(uart->queue != NULL && !xQueueIsQueueFullFromISR(uart->queue)) {
xQueueSendFromISR(uart->queue, &c, &xHigherPriorityTaskWoken);
}
}
}
if (xHigherPriorityTaskWoken) {
portYIELD_FROM_ISR();
}
}
void uartEnableInterrupt(uart_t* uart,void * func)
{
UART_MUTEX_LOCK();
uart->dev->conf1.rxfifo_full_thrhd = 112;
uart->dev->conf1.rx_tout_thrhd = 2;
uart->dev->conf1.rx_tout_en = 1;
uart->dev->int_ena.rxfifo_full = 1;
uart->dev->int_ena.frm_err = 1;
uart->dev->int_ena.rxfifo_tout = 1;
uart->dev->int_clr.val = 0xffffffff;
esp_intr_alloc(UART_INTR_SOURCE(uart->num), (int)ESP_INTR_FLAG_IRAM, _uart_isr, func, &uart->intr_handle);
UART_MUTEX_UNLOCK();
}
void uartDisableInterrupt(uart_t* uart)
{
UART_MUTEX_LOCK();
uart->dev->conf1.val = 0;
uart->dev->int_ena.val = 0;
uart->dev->int_clr.val = 0xffffffff;
esp_intr_free(uart->intr_handle);
uart->intr_handle = NULL;
UART_MUTEX_UNLOCK();
}
void uartDetachRx(uart_t* uart)
{
if(uart == NULL) {
return;
}
pinMatrixInDetach(UART_RXD_IDX(uart->num), false, false);
uartDisableInterrupt(uart);
}
void uartDetachTx(uart_t* uart)
{
if(uart == NULL) {
return;
}
pinMatrixOutDetach(UART_TXD_IDX(uart->num), false, false);
}
void uartAttachRx(uart_t* uart, uint8_t rxPin, bool inverted)
{
if(uart == NULL || rxPin > 39) {
return;
}
pinMode(rxPin, INPUT);
pinMatrixInAttach(rxPin, UART_RXD_IDX(uart->num), inverted);
uartEnableInterrupt(uart,NULL);
}
void uartAttachTx(uart_t* uart, uint8_t txPin, bool inverted)
{
if(uart == NULL || txPin > 39) {
return;
}
pinMode(txPin, OUTPUT);
pinMatrixOutAttach(txPin, UART_TXD_IDX(uart->num), inverted, false);
}
uart_t* uartBegin(uint8_t uart_nr, uint32_t baudrate, uint32_t config, int8_t rxPin, int8_t txPin, uint16_t queueLen, bool inverted)
{
if(uart_nr > 2) {
return NULL;
}
if(rxPin == -1 && txPin == -1) {
return NULL;
}
uart_t* uart = &_uart_bus_array[uart_nr];
#if !CONFIG_DISABLE_HAL_LOCKS
if(uart->lock == NULL) {
uart->lock = xSemaphoreCreateMutex();
if(uart->lock == NULL) {
return NULL;
}
}
#endif
if(queueLen && uart->queue == NULL) {
uart->queue = xQueueCreate(queueLen, sizeof(uint8_t)); //initialize the queue
if(uart->queue == NULL) {
return NULL;
}
}
if(uart_nr == 1){
DPORT_SET_PERI_REG_MASK(DPORT_PERIP_CLK_EN_REG, DPORT_UART1_CLK_EN);
DPORT_CLEAR_PERI_REG_MASK(DPORT_PERIP_RST_EN_REG, DPORT_UART1_RST);
} else if(uart_nr == 2){
DPORT_SET_PERI_REG_MASK(DPORT_PERIP_CLK_EN_REG, DPORT_UART2_CLK_EN);
DPORT_CLEAR_PERI_REG_MASK(DPORT_PERIP_RST_EN_REG, DPORT_UART2_RST);
} else {
DPORT_SET_PERI_REG_MASK(DPORT_PERIP_CLK_EN_REG, DPORT_UART_CLK_EN);
DPORT_CLEAR_PERI_REG_MASK(DPORT_PERIP_RST_EN_REG, DPORT_UART_RST);
}
uartFlush(uart);
uartSetBaudRate(uart, baudrate);
UART_MUTEX_LOCK();
uart->dev->conf0.val = config;
#define TWO_STOP_BITS_CONF 0x3
#define ONE_STOP_BITS_CONF 0x1
if ( uart->dev->conf0.stop_bit_num == TWO_STOP_BITS_CONF) {
uart->dev->conf0.stop_bit_num = ONE_STOP_BITS_CONF;
uart->dev->rs485_conf.dl1_en = 1;
}
UART_MUTEX_UNLOCK();
if(rxPin != -1) {
uartAttachRx(uart, rxPin, inverted);
}
if(txPin != -1) {
uartAttachTx(uart, txPin, inverted);
}
return uart;
}
void uartEnd(uart_t* uart)
{
if(uart == NULL) {
return;
}
UART_MUTEX_LOCK();
if(uart->queue != NULL) {
uint8_t c;
while(xQueueReceive(uart->queue, &c, 0));
vQueueDelete(uart->queue);
uart->queue = NULL;
}
uart->dev->conf0.val = 0;
UART_MUTEX_UNLOCK();
uartDetachRx(uart);
uartDetachTx(uart);
}
uint32_t uartAvailable(uart_t* uart)
{
if(uart == NULL || uart->queue == NULL) {
return 0;
}
return uxQueueMessagesWaiting(uart->queue);
}
uint8_t uartRead(uart_t* uart)
{
if(uart == NULL || uart->queue == NULL) {
return 0;
}
uint8_t c;
if(xQueueReceive(uart->queue, &c, 0)) {
return c;
}
return 0;
}
uint8_t uartPeek(uart_t* uart)
{
if(uart == NULL || uart->queue == NULL) {
return 0;
}
uint8_t c;
if(xQueuePeek(uart->queue, &c, 0)) {
return c;
}
return 0;
}
void uartWrite(uart_t* uart, uint8_t c)
{
if(uart == NULL) {
return;
}
UART_MUTEX_LOCK();
while(uart->dev->status.txfifo_cnt == 0x7F);
uart->dev->fifo.rw_byte = c;
UART_MUTEX_UNLOCK();
}
void uartWriteBuf(uart_t* uart, const uint8_t * data, size_t len)
{
if(uart == NULL) {
return;
}
UART_MUTEX_LOCK();
while(len) {
while(len && uart->dev->status.txfifo_cnt < 0x7F) {
uart->dev->fifo.rw_byte = *data++;
len--;
}
}
UART_MUTEX_UNLOCK();
}
void uartFlush(uart_t* uart)
{
if(uart == NULL) {
return;
}
UART_MUTEX_LOCK();
while(uart->dev->status.txfifo_cnt);
uart->dev->conf0.txfifo_rst = 1;
uart->dev->conf0.txfifo_rst = 0;
uart->dev->conf0.rxfifo_rst = 1;
uart->dev->conf0.rxfifo_rst = 0;
UART_MUTEX_UNLOCK();
}
void uartSetBaudRate(uart_t* uart, uint32_t baud_rate)
{
if(uart == NULL) {
return;
}
UART_MUTEX_LOCK();
uint32_t clk_div = ((UART_CLK_FREQ<<4)/baud_rate);
uart->dev->clk_div.div_int = clk_div>>4 ;
uart->dev->clk_div.div_frag = clk_div & 0xf;
UART_MUTEX_UNLOCK();
}
uint32_t uartGetBaudRate(uart_t* uart)
{
if(uart == NULL) {
return 0;
}
uint32_t clk_div = (uart->dev->clk_div.div_int << 4) | (uart->dev->clk_div.div_frag & 0x0F);
return ((UART_CLK_FREQ<<4)/clk_div);
}
static void IRAM_ATTR uart0_write_char(char c)
{
while(((ESP_REG(0x01C+DR_REG_UART_BASE) >> UART_TXFIFO_CNT_S) & 0x7F) == 0x7F);
ESP_REG(DR_REG_UART_BASE) = c;
}
static void IRAM_ATTR uart1_write_char(char c)
{
while(((ESP_REG(0x01C+DR_REG_UART1_BASE) >> UART_TXFIFO_CNT_S) & 0x7F) == 0x7F);
ESP_REG(DR_REG_UART1_BASE) = c;
}
static void IRAM_ATTR uart2_write_char(char c)
{
while(((ESP_REG(0x01C+DR_REG_UART2_BASE) >> UART_TXFIFO_CNT_S) & 0x7F) == 0x7F);
ESP_REG(DR_REG_UART2_BASE) = c;
}
void uartSetDebug(uart_t* uart)
{
if(uart == NULL || uart->num > 2) {
s_uart_debug_nr = -1;
ets_install_putc1(NULL);
return;
}
if(s_uart_debug_nr == uart->num) {
return;
}
s_uart_debug_nr = uart->num;
switch(s_uart_debug_nr) {
case 0:
ets_install_putc1((void (*)(char)) &uart0_write_char);
break;
case 1:
ets_install_putc1((void (*)(char)) &uart1_write_char);
break;
case 2:
ets_install_putc1((void (*)(char)) &uart2_write_char);
break;
default:
ets_install_putc1(NULL);
break;
}
}
int uartGetDebug()
{
return s_uart_debug_nr;
}
int log_printf(const char *format, ...)
{
if(s_uart_debug_nr < 0){
return 0;
}
static char loc_buf[64];
char * temp = loc_buf;
int len;
va_list arg;
va_list copy;
va_start(arg, format);
va_copy(copy, arg);
len = vsnprintf(NULL, 0, format, arg);
va_end(copy);
if(len >= sizeof(loc_buf)){
temp = (char*)malloc(len+1);
if(temp == NULL) {
return 0;
}
}
vsnprintf(temp, len+1, format, arg);
#if !CONFIG_DISABLE_HAL_LOCKS
if(_uart_bus_array[s_uart_debug_nr].lock){
while (xSemaphoreTake(_uart_bus_array[s_uart_debug_nr].lock, portMAX_DELAY) != pdPASS);
ets_printf("%s", temp);
xSemaphoreGive(_uart_bus_array[s_uart_debug_nr].lock);
} else {
ets_printf("%s", temp);
}
#else
ets_printf("%s", temp);
#endif
va_end(arg);
if(len > 64){
free(temp);
}
return len;
}
// Copyright 2015-2016 Espressif Systems (Shanghai) PTE LTD
//
// Licensed under the Apache License, Version 2.0 (the "License");
// you may not use this file except in compliance with the License.
// You may obtain a copy of the License at
// http://www.apache.org/licenses/LICENSE-2.0
//
// Unless required by applicable law or agreed to in writing, software
// distributed under the License is distributed on an "AS IS" BASIS,
// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
// See the License for the specific language governing permissions and
// limitations under the License.
#ifndef MAIN_ESP32_HAL_UART_H_
#define MAIN_ESP32_HAL_UART_H_
#ifdef __cplusplus
extern "C" {
#endif
#include <stdint.h>
#include <stdbool.h>
#include <stdlib.h>
#define SERIAL_5N1 0x8000010
#define SERIAL_6N1 0x8000014
#define SERIAL_7N1 0x8000018
#define SERIAL_8N1 0x800001c
#define SERIAL_5N2 0x8000030
#define SERIAL_6N2 0x8000034
#define SERIAL_7N2 0x8000038
#define SERIAL_8N2 0x800003c
#define SERIAL_5E1 0x8000012
#define SERIAL_6E1 0x8000016
#define SERIAL_7E1 0x800001a
#define SERIAL_8E1 0x800001e
#define SERIAL_5E2 0x8000032
#define SERIAL_6E2 0x8000036
#define SERIAL_7E2 0x800003a
#define SERIAL_8E2 0x800003e
#define SERIAL_5O1 0x8000013
#define SERIAL_6O1 0x8000017
#define SERIAL_7O1 0x800001b
#define SERIAL_8O1 0x800001f
#define SERIAL_5O2 0x8000033
#define SERIAL_6O2 0x8000037
#define SERIAL_7O2 0x800003b
#define SERIAL_8O2 0x800003f
struct uart_struct_t;
typedef struct uart_struct_t uart_t;
uart_t* uartBegin(uint8_t uart_nr, uint32_t baudrate, uint32_t config, int8_t rxPin, int8_t txPin, uint16_t queueLen, bool inverted);
void uartEnd(uart_t* uart);
uint32_t uartAvailable(uart_t* uart);
uint8_t uartRead(uart_t* uart);
uint8_t uartPeek(uart_t* uart);
void uartWrite(uart_t* uart, uint8_t c);
void uartWriteBuf(uart_t* uart, const uint8_t * data, size_t len);
void uartFlush(uart_t* uart);
void uartSetBaudRate(uart_t* uart, uint32_t baud_rate);
uint32_t uartGetBaudRate(uart_t* uart);
void uartSetDebug(uart_t* uart);
int uartGetDebug();
#ifdef __cplusplus
}
#endif
void uartDisableInterrupt(uart_t* uart);
void uartEnableInterrupt(uart_t* uart,void * func );
#endif /* MAIN_ESP32_HAL_UART_H_ */
#include <stdlib.h>
#include <stdio.h>
#include <string.h>
#include <inttypes.h>
#include "HardwareSerial.h"
HardwareSerial Serial(0);
HardwareSerial::HardwareSerial(int uart_nr) : _uart_nr(uart_nr), _uart(NULL) {}
void HardwareSerial::setInterrupt(void(*arg)() )
{
uartDisableInterrupt(_uart);
intr = arg;
uartEnableInterrupt(_uart,&intr);
}
void HardwareSerial::begin(unsigned long baud, uint32_t config, int8_t rxPin, int8_t txPin, bool invert)
{
if(0 > _uart_nr || _uart_nr > 2) {
log_e("Serial number is invalid, please use 0, 1 or 2");
return;
}
if(_uart) {
end();
}
if(_uart_nr == 0 && rxPin < 0 && txPin < 0) {
rxPin = 3;
txPin = 1;
}
if(_uart_nr == 1 && rxPin < 0 && txPin < 0) {
rxPin = 9;
txPin = 10;
}
if(_uart_nr == 2 && rxPin < 0 && txPin < 0) {
rxPin = 16;
txPin = 17;
}
_uart = uartBegin(_uart_nr, baud, config, rxPin, txPin, 256, invert);
}
void HardwareSerial::end()
{
if(uartGetDebug() == _uart_nr) {
uartSetDebug(0);
}
uartEnd(_uart);
_uart = 0;
}
void HardwareSerial::setDebugOutput(bool en)
{
if(_uart == 0) {
return;
}
if(en) {
uartSetDebug(_uart);
} else {
if(uartGetDebug() == _uart_nr) {
uartSetDebug(0);
}
}
}
int HardwareSerial::available(void)
{
return uartAvailable(_uart);
}
int HardwareSerial::peek(void)
{
if (available()) {
return uartPeek(_uart);
}
return -1;
}
int HardwareSerial::read(void)
{
if(available()) {
return uartRead(_uart);
}
return -1;
}
void HardwareSerial::flush()
{
uartFlush(_uart);
}
size_t HardwareSerial::write(uint8_t c)
{
uartWrite(_uart, c);
return 1;
}
size_t HardwareSerial::write(const uint8_t *buffer, size_t size)
{
uartWriteBuf(_uart, buffer, size);
return size;
}
uint32_t HardwareSerial::baudRate()
{
return uartGetBaudRate(_uart);
}
HardwareSerial::operator bool() const
{
return true;
}
/*
HardwareSerial.h - Hardware serial library for Wiring
Copyright (c) 2006 Nicholas Zambetti. All right reserved.
This library is free software; you can redistribute it and/or
modify it under the terms of the GNU Lesser General Public
License as published by the Free Software Foundation; either
version 2.1 of the License, or (at your option) any later version.
This library is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
Lesser General Public License for more details.
You should have received a copy of the GNU Lesser General Public
License along with this library; if not, write to the Free Software
Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
Modified 28 September 2010 by Mark Sproul
Modified 14 August 2012 by Alarus
Modified 3 December 2013 by Matthijs Kooijman
Modified 18 December 2014 by Ivan Grokhotkov (esp8266 platform support)
Modified 31 March 2015 by Markus Sattler (rewrite the code for UART0 + UART1 support in ESP8266)
Modified 25 April 2015 by Thomas Flayols (add configuration different from 8N1 in ESP8266)
*/
#ifndef HardwareSerial_h
#define HardwareSerial_h
#include <inttypes.h>
#include "Stream.h"
#include "esp32-hal.h"
class HardwareSerial: public Stream
{
public:
HardwareSerial(int uart_nr);
void setInterrupt(void (*arg)() );
void begin(unsigned long baud, uint32_t config=SERIAL_8N1, int8_t rxPin=-1, int8_t txPin=-1, bool invert=false);
void end();
int available(void);
int peek(void);
int read(void);
void flush(void);
size_t write(uint8_t);
size_t write(const uint8_t *buffer, size_t size);
inline size_t write(const char * s)
{
return write((uint8_t*) s, strlen(s));
}
inline size_t write(unsigned long n)
{
return write((uint8_t) n);
}
inline size_t write(long n)
{
return write((uint8_t) n);
}
inline size_t write(unsigned int n)
{
return write((uint8_t) n);
}
inline size_t write(int n)
{
return write((uint8_t) n);
}
uint32_t baudRate();
operator bool() const;
void setDebugOutput(bool);
protected:
void (*intr)() ;
int _uart_nr;
uart_t* _uart;
};
extern HardwareSerial Serial;
#endif
Raw
HardwareSerial.cpp
#include <stdlib.h>
#include <stdio.h>
#include <string.h>
#include <inttypes.h>
#include "HardwareSerial.h"
HardwareSerial Serial(0);
HardwareSerial::HardwareSerial(int uart_nr) : _uart_nr(uart_nr), _uart(NULL) {}
void HardwareSerial::setInterrupt(void(*arg)() )
{
uartDisableInterrupt(_uart);
intr = arg;
uartEnableInterrupt(_uart,&intr);
}
void HardwareSerial::begin(unsigned long baud, uint32_t config, int8_t rxPin, int8_t txPin, bool invert)
{
if(0 > _uart_nr || _uart_nr > 2) {
log_e("Serial number is invalid, please use 0, 1 or 2");
return;
}
if(_uart) {
end();
}
if(_uart_nr == 0 && rxPin < 0 && txPin < 0) {
rxPin = 3;
txPin = 1;
}
if(_uart_nr == 1 && rxPin < 0 && txPin < 0) {
rxPin = 9;
txPin = 10;
}
if(_uart_nr == 2 && rxPin < 0 && txPin < 0) {
rxPin = 16;
txPin = 17;
}
_uart = uartBegin(_uart_nr, baud, config, rxPin, txPin, 256, invert);
}
void HardwareSerial::end()
{
if(uartGetDebug() == _uart_nr) {
uartSetDebug(0);
}
uartEnd(_uart);
_uart = 0;
}
void HardwareSerial::setDebugOutput(bool en)
{
if(_uart == 0) {
return;
}
if(en) {
uartSetDebug(_uart);
} else {
if(uartGetDebug() == _uart_nr) {
uartSetDebug(0);
}
}
}
int HardwareSerial::available(void)
{
return uartAvailable(_uart);
}
int HardwareSerial::peek(void)
{
if (available()) {
return uartPeek(_uart);
}
return -1;
}
int HardwareSerial::read(void)
{
if(available()) {
return uartRead(_uart);
}
return -1;
}
void HardwareSerial::flush()
{
uartFlush(_uart);
}
size_t HardwareSerial::write(uint8_t c)
{
uartWrite(_uart, c);
return 1;
}
size_t HardwareSerial::write(const uint8_t *buffer, size_t size)
{
uartWriteBuf(_uart, buffer, size);
return size;
}
uint32_t HardwareSerial::baudRate()
{
return uartGetBaudRate(_uart);
}
HardwareSerial::operator bool() const
{
return true;
}
Raw
HardwareSerial.h
/*
HardwareSerial.h - Hardware serial library for Wiring
Copyright (c) 2006 Nicholas Zambetti. All right reserved.
This library is free software; you can redistribute it and/or
modify it under the terms of the GNU Lesser General Public
License as published by the Free Software Foundation; either
version 2.1 of the License, or (at your option) any later version.
This library is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
Lesser General Public License for more details.
You should have received a copy of the GNU Lesser General Public
License along with this library; if not, write to the Free Software
Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
Modified 28 September 2010 by Mark Sproul
Modified 14 August 2012 by Alarus
Modified 3 December 2013 by Matthijs Kooijman
Modified 18 December 2014 by Ivan Grokhotkov (esp8266 platform support)
Modified 31 March 2015 by Markus Sattler (rewrite the code for UART0 + UART1 support in ESP8266)
Modified 25 April 2015 by Thomas Flayols (add configuration different from 8N1 in ESP8266)
*/
#ifndef HardwareSerial_h
#define HardwareSerial_h
#include <inttypes.h>
#include "Stream.h"
#include "esp32-hal.h"
class HardwareSerial: public Stream
{
public:
HardwareSerial(int uart_nr);
void setInterrupt(void (*arg)() );
void begin(unsigned long baud, uint32_t config=SERIAL_8N1, int8_t rxPin=-1, int8_t txPin=-1, bool invert=false);
void end();
int available(void);
int peek(void);
int read(void);
void flush(void);
size_t write(uint8_t);
size_t write(const uint8_t *buffer, size_t size);
inline size_t write(const char * s)
{
return write((uint8_t*) s, strlen(s));
}
inline size_t write(unsigned long n)
{
return write((uint8_t) n);
}
inline size_t write(long n)
{
return write((uint8_t) n);
}
inline size_t write(unsigned int n)
{
return write((uint8_t) n);
}
inline size_t write(int n)
{
return write((uint8_t) n);
}
uint32_t baudRate();
operator bool() const;
void setDebugOutput(bool);
protected:
void (*intr)() ;
int _uart_nr;
uart_t* _uart;
};
extern HardwareSerial Serial;
#endif
Raw
serialEventExample.ino
void IRAM_ATTR serialEvent(){
while(Serial.available())
Serial.print((char)Serial.read());
if(!Serial.available())
Serial.print('1');
}
void setup() {
// put your setup code here, to run once:
Serial.begin(115200);
Serial.print("test");
Serial.setInterrupt(&serialEvent);
}
String x = "";
void loop() {
// put your main code here, to run repeatedly:
//serialEvent();
}
Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment