A set of custom made large numbers for a 16x2 LCD HD44780 Arduino Library

rpmLargeFont.ino

/*
 A set of custom made large numbers for a 16x2 LCD using the 
 LiquidCrystal librabry. Works with displays compatible with the 
 Hitachi HD44780 driver. 
 
 The Cuicuit:
 LCD RS pin to D12
 LCD Enable pin to D11
 LCD D4 pin to D5
 LCD D5 pin to D4
 LCD D6 pin to D3
 LCD D7 pin to D2
 LCD Vee tied to a pot to control brightness
 LCD Vss and R/W tied to ground
 LCD Vcc to +5V

 Ronivaldo Sampaio (ronivaldo@gmail.com) for 3 lines
 2013/05/15 -> change for character with only 3 lines
 Original Made by Michael Pilcher
 2/9/2010
 
 character created using:
 http://mikeyancey.com/hamcalc/lcd_characters.php
 */

// include the library
#include <LiquidCrystal.h>

// initialize the interface pins
LiquidCrystal lcd(12, 11, 5, 4, 3, 2);

// the 8 arrays that form each segment of the custom numbers
byte bar1[8] = 
{
        B11100,
        B11110,
        B11110,
        B11110,
        B11110,
        B11110,
        B11110,
        B11100
};
byte bar2[8] =
{
        B00111,
        B01111,
        B01111,
        B01111,
        B01111,
        B01111,
        B01111,
        B00111
};
byte bar3[8] =
{
        B11111,
        B11111,
        B00000,
        B00000,
        B00000,
        B00000,
        B11111,
        B11111
};
byte bar4[8] =
{
        B11110,
        B11100,
        B00000,
        B00000,
        B00000,
        B00000,
        B11000,
        B11100
};
byte bar5[8] =
{
        B01111,
        B00111,
        B00000,
        B00000,
        B00000,
        B00000,
        B00011,
        B00111
};
byte bar6[8] =
{
        B00000,
        B00000,
        B00000,
        B00000,
        B00000,
        B00000,
        B11111,
        B11111
};
byte bar7[8] =
{
        B00000,
        B00000,
        B00000,
        B00000,
        B00000,
        B00000,
        B00111,
        B01111
};
byte bar8[8] =
{
        B11111,
        B11111,
        B00000,
        B00000,
        B00000,
        B00000,
        B00000,
        B00000
};



void setup()
{
  // assignes each segment a write number
  lcd.createChar(1,bar1);
  lcd.createChar(2,bar2);
  lcd.createChar(3,bar3);
  lcd.createChar(4,bar4);
  lcd.createChar(5,bar5);
  lcd.createChar(6,bar6);
  lcd.createChar(7,bar7);
  lcd.createChar(8,bar8);
  
  // sets the LCD's rows and colums:
  lcd.begin(16, 2);

}

void custom0(int col)
{ // uses segments to build the number 0
  lcd.setCursor(col, 0); 
  lcd.write(2);  
  lcd.write(8); 
  lcd.write(1);
  lcd.setCursor(col, 1); 
  lcd.write(2);  
  lcd.write(6);  
  lcd.write(1);
}

void custom1(int col)
{
  lcd.setCursor(col,0);
  lcd.write(32);
  lcd.write(32);
  lcd.write(1);
  lcd.setCursor(col,1);
  lcd.write(32);
  lcd.write(32);
  lcd.write(1);
}

void custom2(int col)
{
  lcd.setCursor(col,0);
  lcd.write(5);
  lcd.write(3);
  lcd.write(1);
  lcd.setCursor(col, 1);
  lcd.write(2);
  lcd.write(6);
  lcd.write(6);
}

void custom3(int col)
{
  lcd.setCursor(col,0);
  lcd.write(5);
  lcd.write(3);
  lcd.write(1);
  lcd.setCursor(col, 1);
  lcd.write(7);
  lcd.write(6);
  lcd.write(1); 
}

void custom4(int col)
{
  lcd.setCursor(col,0);
  lcd.write(2);
  lcd.write(6);
  lcd.write(1);
  lcd.setCursor(col, 1);
  lcd.write(32);
  lcd.write(32);
  lcd.write(1);
}

void custom5(int col)
{
  lcd.setCursor(col,0);
  lcd.write(2);
  lcd.write(3);
  lcd.write(4);
  lcd.setCursor(col, 1);
  lcd.write(7);
  lcd.write(6);
  lcd.write(1);
}

void custom6(int col)
{
  lcd.setCursor(col,0);
  lcd.write(2);
  lcd.write(3);
  lcd.write(4);
  lcd.setCursor(col, 1);
  lcd.write(2);
  lcd.write(6);
  lcd.write(1);
}

void custom7(int col)
{
  lcd.setCursor(col,0);
  lcd.write(2);
  lcd.write(8);
  lcd.write(1);
  lcd.setCursor(col, 1);
  lcd.write(32);
  lcd.write(32);
  lcd.write(1);
}

void custom8(int col)
{
  lcd.setCursor(col, 0); 
  lcd.write(2);  
  lcd.write(3); 
  lcd.write(1);
  lcd.setCursor(col, 1); 
  lcd.write(2);  
  lcd.write(6);  
  lcd.write(1);
}

void custom9(int col)
{
  lcd.setCursor(col, 0); 
  lcd.write(2);  
  lcd.write(3); 
  lcd.write(1);
  lcd.setCursor(col, 1); 
  lcd.write(7);  
  lcd.write(6);  
  lcd.write(1);
}

void printNumber(int value, int col) {
  if (value == 0) {
    custom0(col);
  } if (value == 1) {
    custom1(col);
  } if (value == 2) {
    custom2(col);
  } if (value == 3) {
    custom3(col);
  } if (value == 4) {
    custom4(col);
  } if (value == 5) {
    custom5(col);
  } if (value == 6) {
    custom6(col);
  } if (value == 7) {
    custom7(col);
  } if (value == 8) {
    custom8(col);
  } if (value == 9) {
    custom9(col);
  }      
}  

void printRPM(int rpm) {
  int m , c, d, u, number;
  number = rpm;
  if (number > 999) {
    m = (number - (number % 1000)) / 1000;
    number = number % 1000;
  } else {
    m = 0;
  }  
  
  if (number > 99) {
    c = (number - (number % 100)) / 100;
    number = number % 100;
  } else {
    c = 0;
  }  

  if (number > 9) {
    d = (number - (number % 10)) / 10;
    number = number % 10;
  } else {
    d = 0;
  }  
  
  u = number;
  
  lcd.setCursor(0, 0);
  lcd.print("RPM: ");
  printNumber(m, 4);
  printNumber(c, 7);
  printNumber(d, 10);
  printNumber(u, 13);
    
}  

void loop()
{
  printRPM(millis() % 10000);
  delay(200);
}

Ronivaldo, obrigado pela partilha

Greolt also publish your code, with the alterations you say, the community thanks