Skip to content

Instantly share code, notes, and snippets.

@rtgoodwin
Created November 28, 2011 19:09
Show Gist options
  • Save rtgoodwin/1401568 to your computer and use it in GitHub Desktop.
Save rtgoodwin/1401568 to your computer and use it in GitHub Desktop.
My Config as of slic3r git 0.5.3 Nov 28
bottom_layer_speed_ratio = 0.3
duplicate_distance = 6
duplicate_x = 1
duplicate_y = 1
end_gcode = ; M104 S0 ; turn off temperature\nG28 X0 ; home X axis\nM84 ; disable motors
extrusion_multiplier = 1.056
extrusion_width_ratio = 0
filament_diameter = 1.84
fill_angle = 0
fill_density = 0.2
fill_pattern = rectilinear
first_layer_height_ratio = 1
infill_every_layers = 1
layer_height = 0.2
no_extrusion = 0
nozzle_diameter = .35
perimeter_feed_rate = 30
perimeters = 3
print_center = 60,60
print_feed_rate = 60
retract_before_travel = 2
retract_length = 2
retract_lift = 0
retract_restart_extra = 0
retract_speed = 18
rotate = 0
scale = 1
skirt_distance = 6
skirt_height = 1
skirts = 4
solid_fill_pattern = rectilinear
solid_layers = 3
start_gcode = G92 X0 Y0 Z0 E0 ; RESET home coords
temperature = 185
travel_feed_rate = 75
use_relative_e_distances = 0
z_offset = 0
Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment