Created
October 22, 2020 17:19
-
-
Save rubeniskov/e965762b32a224d65c4ec9073c9e123a to your computer and use it in GitHub Desktop.
cnc1830.config
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
$0=10 (step pulse, usec) | |
$1=25 (step idle delay, msec) | |
$2=0 (step port invert mask:00000000) | |
$3=0 (dir port invert mask:00000000) | |
$4=0 (step enable invert, bool) | |
$5=0 (limit pins invert, bool) | |
$6=0 (probe pin invert, bool) | |
$10=3 (status report mask:00000011) | |
$11=0.010 (junction deviation, mm) | |
$12=0.002 (arc tolerance, mm) | |
$13=0 (report inches, bool) | |
$20=0 (soft limits, bool) | |
$21=0 (hard limits, bool) | |
$22=0 (homing cycle, bool) | |
$23=0 (homing dir invert mask:00000000) | |
$24=25.000 (homing feed, mm/min) | |
$25=500.000 (homing seek, mm/min) | |
$26=250 (homing debounce, msec) | |
$27=1.000 (homing pull-off, mm) | |
$100=400.000 (x, step/mm) | |
$101=400.000 (y, step/mm) | |
$102=400.000 (z, step/mm) | |
$110=1500.000 (x max rate, mm/min) | |
$111=1500.000 (y max rate, mm/min) | |
$112=1500.000 (z max rate, mm/min) | |
$120=10.000 (x accel, mm/sec^2) | |
$121=10.000 (y accel, mm/sec^2) | |
$122=10.000 (z accel, mm/sec^2) | |
$130=200.000 (x max travel, mm) | |
$131=200.000 (y max travel, mm) | |
$132=200.000 (z max travel, mm) |
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment