Skip to content

Instantly share code, notes, and snippets.

@rubik
Created June 26, 2014 11:27
Show Gist options
  • Star 0 You must be signed in to star a gist
  • Fork 0 You must be signed in to fork a gist
  • Save rubik/b89bc74cd56bbdac279b to your computer and use it in GitHub Desktop.
Save rubik/b89bc74cd56bbdac279b to your computer and use it in GitHub Desktop.
[ 53.443]
X.Org X Server 1.15.1
Release Date: 2014-04-13
[ 53.443] X Protocol Version 11, Revision 0
[ 53.443] Build Operating System: Linux 3.14.0-4-ARCH x86_64
[ 53.443] Current Operating System: Linux miki-laptop 3.15.1-1-ARCH #1 SMP PREEMPT Tue Jun 17 09:32:20 CEST 2014 x86_64
[ 53.443] Kernel command line: BOOT_IMAGE=../vmlinuz-linux root=/dev/sda3 rw vga=773 initrd=../initramfs-linux.img
[ 53.443] Build Date: 14 April 2014 08:39:09AM
[ 53.444]
[ 53.444] Current version of pixman: 0.32.4
[ 53.444] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 53.444] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 53.444] (==) Log file: "/var/log/Xorg.0.log", Time: Thu Jun 26 13:27:15 2014
[ 53.444] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 53.444] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 53.445] (==) No Layout section. Using the first Screen section.
[ 53.445] (==) No screen section available. Using defaults.
[ 53.445] (**) |-->Screen "Default Screen Section" (0)
[ 53.445] (**) | |-->Monitor "<default monitor>"
[ 53.445] (==) No device specified for screen "Default Screen Section".
Using the first device section listed.
[ 53.445] (**) | |-->Device "Intel Graphics"
[ 53.445] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 53.445] (==) Automatically adding devices
[ 53.445] (==) Automatically enabling devices
[ 53.445] (==) Automatically adding GPU devices
[ 53.445] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[ 53.445] Entry deleted from font path.
[ 53.445] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[ 53.445] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[ 53.445] Entry deleted from font path.
[ 53.445] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[ 53.445] (==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/OTF/,
/usr/share/fonts/Type1/
[ 53.445] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 53.445] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 53.445] (II) Loader magic: 0x804c80
[ 53.445] (II) Module ABI versions:
[ 53.445] X.Org ANSI C Emulation: 0.4
[ 53.445] X.Org Video Driver: 15.0
[ 53.445] X.Org XInput driver : 20.0
[ 53.445] X.Org Server Extension : 8.0
[ 53.445] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 53.448] (--) PCI:*(0:0:2:0) 8086:27a2:1734:10c1 rev 3, Mem @ 0xd4200000/524288, 0xc0000000/268435456, 0xd4300000/262144, I/O @ 0x00001800/8
[ 53.448] (--) PCI: (0:0:2:1) 8086:27a6:1734:10c1 rev 3, Mem @ 0xd4280000/524288
[ 53.448] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[ 53.448] Initializing built-in extension Generic Event Extension
[ 53.448] Initializing built-in extension SHAPE
[ 53.448] Initializing built-in extension MIT-SHM
[ 53.448] Initializing built-in extension XInputExtension
[ 53.448] Initializing built-in extension XTEST
[ 53.448] Initializing built-in extension BIG-REQUESTS
[ 53.448] Initializing built-in extension SYNC
[ 53.449] Initializing built-in extension XKEYBOARD
[ 53.451] Initializing built-in extension XC-MISC
[ 53.452] Initializing built-in extension SECURITY
[ 53.454] Initializing built-in extension XINERAMA
[ 53.455] Initializing built-in extension XFIXES
[ 53.456] Initializing built-in extension RENDER
[ 53.458] Initializing built-in extension RANDR
[ 53.459] Initializing built-in extension COMPOSITE
[ 53.460] Initializing built-in extension DAMAGE
[ 53.462] Initializing built-in extension MIT-SCREEN-SAVER
[ 53.463] Initializing built-in extension DOUBLE-BUFFER
[ 53.464] Initializing built-in extension RECORD
[ 53.465] Initializing built-in extension DPMS
[ 53.466] Initializing built-in extension Present
[ 53.468] Initializing built-in extension DRI3
[ 53.469] Initializing built-in extension X-Resource
[ 53.470] Initializing built-in extension XVideo
[ 53.471] Initializing built-in extension XVideo-MotionCompensation
[ 53.472] Initializing built-in extension XFree86-VidModeExtension
[ 53.473] Initializing built-in extension XFree86-DGA
[ 53.474] Initializing built-in extension XFree86-DRI
[ 53.475] Initializing built-in extension DRI2
[ 53.475] (II) "glx" will be loaded by default.
[ 53.475] (II) LoadModule: "dri2"
[ 53.475] (II) Module "dri2" already built-in
[ 53.475] (II) LoadModule: "glamoregl"
[ 53.475] (II) Loading /usr/lib/xorg/modules/libglamoregl.so
[ 53.478] (II) Module glamoregl: vendor="X.Org Foundation"
[ 53.478] compiled for 1.15.0, module version = 0.6.0
[ 53.478] ABI class: X.Org ANSI C Emulation, version 0.4
[ 53.478] (II) LoadModule: "glx"
[ 53.478] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 53.478] (II) Module glx: vendor="X.Org Foundation"
[ 53.478] compiled for 1.15.1, module version = 1.0.0
[ 53.478] ABI class: X.Org Server Extension, version 8.0
[ 53.478] (==) AIGLX enabled
[ 53.479] Loading extension GLX
[ 53.479] (II) LoadModule: "intel"
[ 53.479] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[ 53.480] (II) Module intel: vendor="X.Org Foundation"
[ 53.480] compiled for 1.15.1, module version = 2.99.912
[ 53.480] Module class: X.Org Video Driver
[ 53.480] ABI class: X.Org Video Driver, version 15.0
[ 53.480] (II) intel: Driver for Intel(R) Integrated Graphics Chipsets:
i810, i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G,
915G, E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM,
Pineview G, 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33,
GM45, 4 Series, G45/G43, Q45/Q43, G41, B43
[ 53.480] (II) intel: Driver for Intel(R) HD Graphics: 2000-5000
[ 53.480] (II) intel: Driver for Intel(R) Iris(TM) Graphics: 5100
[ 53.480] (II) intel: Driver for Intel(R) Iris(TM) Pro Graphics: 5200
[ 53.480] (--) using VT number 2
[ 53.484] (II) intel(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 53.484] (==) intel(0): Depth 24, (--) framebuffer bpp 32
[ 53.485] (==) intel(0): RGB weight 888
[ 53.485] (==) intel(0): Default visual is TrueColor
[ 53.485] (**) intel(0): Option "AccelMethod" "uxa"
[ 53.485] (--) intel(0): Integrated Graphics Chipset: Intel(R) 945GM
[ 53.485] (**) intel(0): Relaxed fencing disabled
[ 53.485] (**) intel(0): Wait on SwapBuffers? enabled
[ 53.485] (**) intel(0): Triple buffering? enabled
[ 53.485] (**) intel(0): Framebuffer tiled
[ 53.485] (**) intel(0): Pixmaps tiled
[ 53.485] (**) intel(0): 3D buffers tiled
[ 53.485] (**) intel(0): SwapBuffers wait enabled
[ 53.485] (==) intel(0): video overlay key set to 0x101fe
[ 53.485] (II) intel(0): Output LVDS1 has no monitor section
[ 53.485] (--) intel(0): found backlight control interface intel_backlight
[ 53.517] (II) intel(0): Output VGA1 has no monitor section
[ 53.803] (II) intel(0): Output TV1 has no monitor section
[ 53.803] (II) intel(0): EDID for output LVDS1
[ 53.803] (II) intel(0): Manufacturer: LPL Model: 0 Serial#: 0
[ 53.803] (II) intel(0): Year: 2005 Week: 0
[ 53.803] (II) intel(0): EDID Version: 1.2
[ 53.803] (II) intel(0): Digital Display Input
[ 53.803] (II) intel(0): Max Image Size [cm]: horiz.: 33 vert.: 21
[ 53.803] (II) intel(0): Gamma: 2.20
[ 53.803] (II) intel(0): No DPMS capabilities specified
[ 53.803] (II) intel(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
[ 53.803] (II) intel(0): First detailed timing is preferred mode
[ 53.803] (II) intel(0): redX: 0.590 redY: 0.344 greenX: 0.323 greenY: 0.534
[ 53.803] (II) intel(0): blueX: 0.156 blueY: 0.138 whiteX: 0.312 whiteY: 0.328
[ 53.803] (II) intel(0): Manufacturer's mask: 0
[ 53.803] (II) intel(0): Supported detailed timing:
[ 53.804] (II) intel(0): clock: 71.2 MHz Image Size: 289 x 210 mm
[ 53.804] (II) intel(0): h_active: 1280 h_sync: 1328 h_sync_end 1360 h_blank_end 1440 h_border: 0
[ 53.804] (II) intel(0): v_active: 800 v_sync: 802 v_sync_end 808 v_blanking: 823 v_border: 0
[ 53.804] (II) intel(0): LGPhilipsLCD
[ 53.804] (II) intel(0): LP154W01-TLA1
[ 53.804] (II) intel(0): EDID (in hex):
[ 53.804] (II) intel(0): 00ffffffffffff00320c000000000000
[ 53.804] (II) intel(0): 000f0102802115780a0f109758528828
[ 53.804] (II) intel(0): 23505400000001010101010101010101
[ 53.804] (II) intel(0): 010101010101d51b00a0502017303020
[ 53.804] (II) intel(0): 26002115100000190000000000000000
[ 53.804] (II) intel(0): 00000000000000000000000000fe004c
[ 53.804] (II) intel(0): 475068696c6970734c43440a000000fe
[ 53.804] (II) intel(0): 004c503135345730312d544c41310009
[ 53.804] (WW) intel(0): Output LVDS1: Strange aspect ratio (289/2100), consider adding a quirk
[ 53.804] (II) intel(0): Not using default mode "320x240" (doublescan mode not supported)
[ 53.804] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
[ 53.804] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
[ 53.804] (II) intel(0): Not using default mode "512x384" (doublescan mode not supported)
[ 53.804] (II) intel(0): Not using default mode "640x480" (doublescan mode not supported)
[ 53.804] (II) intel(0): Not using default mode "640x512" (doublescan mode not supported)
[ 53.804] (II) intel(0): Not using default mode "800x600" (doublescan mode not supported)
[ 53.804] (II) intel(0): Not using default mode "896x672" (doublescan mode not supported)
[ 53.804] (II) intel(0): Not using default mode "928x696" (doublescan mode not supported)
[ 53.804] (II) intel(0): Not using default mode "960x720" (doublescan mode not supported)
[ 53.804] (II) intel(0): Not using default mode "700x525" (doublescan mode not supported)
[ 53.804] (II) intel(0): Not using default mode "1024x768" (doublescan mode not supported)
[ 53.804] (II) intel(0): Printing probed modes for output LVDS1
[ 53.804] (II) intel(0): Modeline "1280x800"x60.1 71.25 1280 1328 1360 1440 800 802 808 823 -hsync -vsync (49.5 kHz eP)
[ 53.804] (II) intel(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz d)
[ 53.804] (II) intel(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz d)
[ 53.804] (II) intel(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz d)
[ 53.804] (II) intel(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz d)
[ 53.837] (II) intel(0): EDID for output VGA1
[ 54.112] (II) intel(0): EDID for output TV1
[ 54.112] (II) intel(0): Output LVDS1 connected
[ 54.112] (II) intel(0): Output VGA1 disconnected
[ 54.112] (II) intel(0): Output TV1 disconnected
[ 54.112] (II) intel(0): Using exact sizes for initial modes
[ 54.112] (II) intel(0): Output LVDS1 using initial mode 1280x800
[ 54.112] (II) intel(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[ 54.113] (II) intel(0): Kernel page flipping support detected, enabling
[ 54.113] (==) intel(0): DPI set to (96, 96)
[ 54.113] (II) Loading sub module "fb"
[ 54.113] (II) LoadModule: "fb"
[ 54.113] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 54.113] (II) Module fb: vendor="X.Org Foundation"
[ 54.113] compiled for 1.15.1, module version = 1.0.0
[ 54.113] ABI class: X.Org ANSI C Emulation, version 0.4
[ 54.113] (II) Loading sub module "dri2"
[ 54.113] (II) LoadModule: "dri2"
[ 54.113] (II) Module "dri2" already built-in
[ 54.113] (II) Loading sub module "dri3"
[ 54.113] (II) LoadModule: "dri3"
[ 54.114] (WW) Warning, couldn't open module dri3
[ 54.114] (II) UnloadModule: "dri3"
[ 54.114] (II) Unloading dri3
[ 54.114] (EE) intel: Failed to load module "dri3" (module does not exist, 0)
[ 54.114] (==) Depth 24 pixmap format is 32 bpp
[ 54.114] (II) intel(0): Allocated new frame buffer 1280x800 stride 8192, tiled
[ 54.114] (II) UXA(0): Driver registered support for the following operations:
[ 54.114] (II) solid
[ 54.114] (II) copy
[ 54.114] (II) composite (RENDER acceleration)
[ 54.114] (II) put_image
[ 54.114] (II) get_image
[ 54.114] (II) intel(0): [DRI2] Setup complete
[ 54.114] (II) intel(0): [DRI2] DRI driver: i915
[ 54.114] (II) intel(0): [DRI2] VDPAU driver: i915
[ 54.114] (==) intel(0): Backing store enabled
[ 54.114] (==) intel(0): Silken mouse enabled
[ 54.114] (II) intel(0): Initializing HW Cursor
[ 54.114] (II) intel(0): Use legacy UXA acceleration.
[ 54.114] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[ 54.115] (==) intel(0): DPMS enabled
[ 54.115] (==) intel(0): Intel XvMC decoder disabled
[ 54.115] (II) intel(0): Set up textured video
[ 54.115] (II) intel(0): Set up overlay video
[ 54.115] (II) intel(0): DRI2: Enabled
[ 54.115] (II) intel(0): DRI3: Disabled
[ 54.115] (==) intel(0): hotplug detection: "enabled"
[ 54.133] (--) RandR disabled
[ 54.146] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[ 54.146] (II) AIGLX: enabled GLX_ARB_create_context
[ 54.146] (II) AIGLX: enabled GLX_ARB_create_context_profile
[ 54.146] (II) AIGLX: enabled GLX_EXT_create_context_es2_profile
[ 54.146] (II) AIGLX: enabled GLX_INTEL_swap_event
[ 54.146] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
[ 54.146] (II) AIGLX: enabled GLX_EXT_framebuffer_sRGB
[ 54.146] (II) AIGLX: enabled GLX_ARB_fbconfig_float
[ 54.146] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[ 54.146] (II) AIGLX: Loaded and initialized i915
[ 54.146] (II) GLX: Initialized DRI2 GL provider for screen 0
[ 54.147] (EE)
Fatal server error:
[ 54.147] (EE) failed to create screen resources(EE)
[ 54.147] (EE)
Please consult the The X.Org Foundation support
at http://wiki.x.org
for help.
[ 54.147] (EE) Please also check the log file at "/var/log/Xorg.0.log" for additional information.
[ 54.147] (EE)
[ 54.147] (II) AIGLX: Suspending AIGLX clients for VT switch
[ 54.161] (EE) Server terminated with error (1). Closing log file.
Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment