-
-
Save rubo77/19be1512e87ecc05cf13 to your computer and use it in GitHub Desktop.
wireless script results from http://askubuntu.com/questions/425155/my-wireless-wifi-connection-does-not-work-what-information-is-needed-to-diagnos/425205#425205
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
########## wireless info START ########## | |
Report from: 07 Sep 2014 07:52 CEST +0200 | |
Script from: 05 Sep 2014 22:42 UTC +0000 | |
##### release ##### | |
Distributor ID: Ubuntu | |
Description: Ubuntu 14.04.1 LTS | |
Release: 14.04 | |
Codename: trusty | |
##### kernel ##### | |
Linux 3.14.1-031401-generic #201404141220 SMP Mon Apr 14 16:59:42 UTC 2014 i686 i686 i686 GNU/Linux | |
Parameters: ro | |
##### desktop ##### | |
Ubuntu (from ~/.dmrc) | |
##### lspci ##### | |
01:00.0 Network controller [0280]: Intel Corporation Wireless 7260 [8086:08b2] (rev 6b) | |
Subsystem: Intel Corporation Wireless-N 7260 [8086:c262] | |
Kernel driver in use: iwlwifi | |
##### lsusb ##### | |
Bus 001 Device 002: ID 8087:8000 Intel Corp. | |
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub | |
Bus 003 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub | |
Bus 002 Device 008: ID 5986:0535 Acer, Inc | |
Bus 002 Device 018: ID 04f3:016f Elan Microelectronics Corp. | |
Bus 002 Device 003: ID 2047:0855 Texas Instruments | |
Bus 002 Device 002: ID 8087:07dc Intel Corp. | |
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub | |
##### PCMCIA card info ##### | |
##### rfkill ##### | |
0: hci0: Bluetooth | |
Soft blocked: yes | |
Hard blocked: no | |
1: phy0: Wireless LAN | |
Soft blocked: no | |
Hard blocked: no | |
##### lsmod ##### | |
iwlmvm 184162 0 | |
mac80211 582807 1 iwlmvm | |
iwlwifi 161370 1 iwlmvm | |
cfg80211 447796 3 iwlwifi,mac80211,iwlmvm | |
##### interfaces ##### | |
auto lo | |
iface lo inet loopback | |
##### ifconfig ##### | |
wlan0 Link encap:Ethernet HWaddr <MAC addr wlan0> | |
inet addr:****.146.179 Bcast:****.255.255 Mask:255.255.128.0 | |
inet6 addr: ****:5e51:4fff:fe70:1372/64 Scope:Global | |
inet6 addr: fe80::5e51:4fff:fe70:1372/64 Scope:Link | |
inet6 addr: ****:94d5:aa:256a:62cb/64 Scope:Global | |
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 | |
RX packets:8360 errors:0 dropped:0 overruns:0 frame:0 | |
TX packets:6591 errors:0 dropped:0 overruns:0 carrier:0 | |
collisions:0 txqueuelen:1000 | |
RX bytes:5648277 (5.6 MB) TX bytes:1287675 (1.2 MB) | |
##### iwconfig ##### | |
lo no wireless extensions. | |
wlan0 IEEE 802.11bgn ESSID:"****" | |
Mode:Managed Frequency:2.462 GHz Access Point: <MAC addr ****> | |
Bit Rate=130 Mb/s Tx-Power=16 dBm | |
Retry short limit:7 RTS thr:off Fragment thr:off | |
Encryption key:off | |
Power Management:off | |
Link Quality=62/70 Signal level=-48 dBm | |
Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0 | |
Tx excessive retries:2 Invalid misc:218 Missed beacon:0 | |
##### route ##### | |
Kernel IP routing table | |
Destination Gateway Genmask Flags Metric Ref Use Iface | |
0.0.0.0 ****.144.1 0.0.0.0 UG 0 0 0 wlan0 | |
****.128.0 0.0.0.0 255.255.128.0 U 9 0 0 wlan0 | |
##### resolv.conf ##### | |
nameserver 127.0.1.1 | |
search ffki | |
##### nm-tool ##### | |
NetworkManager Tool | |
State: connected (global) | |
- Device: wlan0 [****] ----------------------------------- | |
Type: 802.11 WiFi | |
Driver: iwlwifi | |
State: connected | |
Default: yes | |
HW Address: <MAC addr wlan0> | |
Capabilities: | |
Speed: 130 Mb/s | |
Wireless Properties | |
WEP Encryption: yes | |
WPA Encryption: yes | |
WPA2 Encryption: yes | |
Wireless Access Points (* = current AP) | |
FRITZ!Box 7312: Infra, <MAC addr FRITZ!Box 7312>, Freq 2412 MHz, Rate 54 Mb/s, Strength 52 WPA WPA2 | |
****: Infra, <MAC addr ****>, Freq 2417 MHz, Rate 54 Mb/s, Strength 35 WPA WPA2 | |
<MAC addr 02>: Ad-Hoc, <MAC addr http>, Freq 2462 MHz, Rate 54 Mb/s, Strength 100 | |
****: Infra, <MAC addr http>, Freq 2462 MHz, Rate 54 Mb/s, Strength 50 | |
****: Infra, <MAC addr http>, Freq 2462 MHz, Rate 54 Mb/s, Strength 22 | |
****: Infra, <MAC addr http>, Freq 2462 MHz, Rate 54 Mb/s, Strength 20 | |
*****: Infra, <MAC addr ****>, Freq 2462 MHz, Rate 54 Mb/s, Strength 68 | |
****: Infra, <MAC addr WB.kabeldeutschland>, Freq 2447 MHz, Rate 54 Mb/s, Strength 22 WPA WPA2 | |
WB.kabeldeutschland: Infra, <MAC address>, Freq 2437 MHz, Rate 54 Mb/s, Strength 20 WPA WPA2 | |
IPv4 Settings: | |
Address: ****.146.179 | |
Prefix: 17 (255.255.128.0) | |
Gateway: ****.144.1 | |
DNS: ****.144.1 | |
DNS: ****.128.1 | |
DNS: ****.160.1 | |
IPv6 Settings: | |
Address: ****:94d5:aa:256a:62cb | |
Prefix: 64 | |
Gateway: **** | |
Address: ****:5e51:4fff:fe70:1372 | |
Prefix: 64 | |
Gateway: **** | |
Address: fe80::5e51:4fff:fe70:1372 | |
Prefix: 64 | |
Gateway: **** | |
DNS: ****::ff03 | |
DNS: ****::ff00 | |
DNS: ****::1 | |
##### NetworkManager.state ##### | |
[main] | |
NetworkingEnabled=true | |
WirelessEnabled=true | |
WWANEnabled=true | |
WimaxEnabled=true | |
##### NetworkManager.conf ##### | |
[main] | |
plugins=ifupdown,keyfile,ofono | |
dns=dnsmasq | |
no-auto-default=<MAC address>, | |
[ifupdown] | |
managed=false | |
##### iw reg get ##### | |
country DE: | |
(2400 - 2483 @ 40), (N/A, 20) | |
(5150 - 5250 @ 40), (N/A, 20), NO-OUTDOOR | |
(5250 - 5350 @ 40), (N/A, 20), NO-OUTDOOR, DFS | |
(5470 - 5725 @ 40), (N/A, 26), DFS | |
(57240 - 65880 @ 2160), (N/A, 40), NO-OUTDOOR | |
##### iwlist channels ##### | |
lo no frequency information. | |
wlan0 13 channels in total; available frequencies : | |
Channel 01 : 2.412 GHz | |
Channel 02 : 2.417 GHz | |
Channel 03 : 2.422 GHz | |
Channel 04 : 2.427 GHz | |
Channel 05 : 2.432 GHz | |
Channel 06 : 2.437 GHz | |
Channel 07 : 2.442 GHz | |
Channel 08 : 2.447 GHz | |
Channel 09 : 2.452 GHz | |
Channel 10 : 2.457 GHz | |
Channel 11 : 2.462 GHz | |
Channel 12 : 2.467 GHz | |
Channel 13 : 2.472 GHz | |
Current Frequency=2.462 GHz (Channel 11) | |
##### iwlist scan ##### | |
Channel occupancy: | |
1 WLAPs on Frequency:2.412 GHz (Channel 1) | |
1 WLAPs on Frequency:2.417 GHz (Channel 2) | |
3 WLAPs on Frequency:2.462 GHz (Channel 11) | |
wlan0 Scan completed : | |
**** skipped *** | |
##### module infos ##### | |
[iwlmvm] | |
filename: /lib/modules/3.14.1-031401-generic/kernel/drivers/net/wireless/iwlwifi/mvm/iwlmvm.ko | |
license: GPL | |
author: Copyright(c) 2003- 2014 Intel Corporation <ilw@linux.intel.com> | |
version: in-tree: | |
description: The new Intel(R) wireless AGN driver for Linux | |
srcversion: D48B0769C62E2D35B39B2FF | |
depends: iwlwifi,mac80211,cfg80211 | |
intree: Y | |
vermagic: 3.14.1-031401-generic SMP mod_unload modversions 686 | |
signer: Magrathea: Glacier signing key | |
sig_key: D1:07:3E:42:3F:50:C9:32:0A:B8:DC:E9:B6:22:D5:76:F1:41:B2:E3 | |
sig_hashalgo: sha512 | |
parm: init_dbg:set to true to debug an ASSERT in INIT fw (default: false (bool) | |
parm: power_scheme:power management scheme: 1-active, 2-balanced, 3-low power, default: 2 (int) | |
[iwlwifi] | |
filename: /lib/modules/3.14.1-031401-generic/kernel/drivers/net/wireless/iwlwifi/iwlwifi.ko | |
license: GPL | |
author: Copyright(c) 2003- 2014 Intel Corporation <ilw@linux.intel.com> | |
version: in-tree: | |
description: Intel(R) Wireless WiFi driver for Linux | |
firmware: iwlwifi-100-5.ucode | |
firmware: iwlwifi-1000-5.ucode | |
firmware: iwlwifi-135-6.ucode | |
firmware: iwlwifi-105-6.ucode | |
firmware: iwlwifi-2030-6.ucode | |
firmware: iwlwifi-2000-6.ucode | |
firmware: iwlwifi-5150-2.ucode | |
firmware: iwlwifi-5000-5.ucode | |
firmware: iwlwifi-6000g2b-6.ucode | |
firmware: iwlwifi-6000g2a-5.ucode | |
firmware: iwlwifi-6050-5.ucode | |
firmware: iwlwifi-6000-4.ucode | |
firmware: iwlwifi-3160-7.ucode | |
firmware: iwlwifi-7260-7.ucode | |
srcversion: 900BC7FF805B79DE0D82BFF | |
depends: cfg80211 | |
intree: Y | |
vermagic: 3.14.1-031401-generic SMP mod_unload modversions 686 | |
signer: Magrathea: Glacier signing key | |
sig_key: D1:07:3E:42:3F:50:C9:32:0A:B8:DC:E9:B6:22:D5:76:F1:41:B2:E3 | |
sig_hashalgo: sha512 | |
parm: swcrypto:using crypto in software (default 0 [hardware]) (int) | |
parm: 11n_disable:disable 11n functionality, bitmap: 1: full, 2: disable agg TX, 4: disable agg RX, 8 enable agg TX (uint) | |
parm: amsdu_size_8K:enable 8K amsdu size (default 0) (int) | |
parm: fw_restart:restart firmware in case of error (default true) (bool) | |
parm: antenna_coupling:specify antenna coupling in dB (defualt: 0 dB) (int) | |
parm: wd_disable:Disable stuck queue watchdog timer 0=system default, 1=disable, 2=enable (default: 0) (int) | |
parm: nvm_file:NVM file name (charp) | |
parm: bt_coex_active:enable wifi/bt co-exist (default: enable) (bool) | |
parm: led_mode:0=system default, 1=On(RF On)/Off(RF Off), 2=blinking, 3=Off (default: 0) (int) | |
parm: power_save:enable WiFi power management (default: disable) (bool) | |
parm: power_level:default power save level (range from 1 - 5, default: 1) (int) | |
##### module parameters ##### | |
[iwlmvm] | |
init_dbg: N | |
power_scheme: 2 | |
[iwlwifi] | |
11n_disable: 0 | |
amsdu_size_8K: 0 | |
antenna_coupling: 0 | |
bt_coex_active: Y | |
fw_restart: Y | |
led_mode: 0 | |
nvm_file: (null) | |
power_level: 0 | |
power_save: N | |
swcrypto: 0 | |
wd_disable: 1 | |
##### /etc/modules ##### | |
lp | |
##### blacklists ##### | |
[/etc/modprobe.d/blacklist-ath_pci.conf] | |
blacklist ath_pci | |
[/etc/modprobe.d/blacklist.conf] | |
blacklist evbug | |
blacklist usbmouse | |
blacklist usbkbd | |
blacklist eepro100 | |
blacklist de4x5 | |
blacklist eth1394 | |
blacklist snd_intel8x0m | |
blacklist snd_aw2 | |
blacklist i2c_i801 | |
blacklist prism54 | |
blacklist bcm43xx | |
blacklist garmin_gps | |
blacklist asus_acpi | |
blacklist snd_pcsp | |
blacklist pcspkr | |
blacklist amd76x_edac | |
blacklist ideapad_laptop | |
##### rc.local ##### | |
rfkill block bluetooth | |
iw dev wlan0 set power_save off | |
##### udev rules ##### | |
[/etc/udev/rules.d/70-persistent-net.rules] | |
# PCI device 0x8086:0x08b2 (iwlwifi) | |
SUBSYSTEM=="net", ACTION=="add", DRIVERS=="?*", ATTR{address}=="<MAC addr wlan0>", ATTR{dev_id}=="0x0", ATTR{type}=="1", KERNEL=="wlan*", NAME="wlan0" | |
# USB device 0x:0x (ax88179_178a) | |
SUBSYSTEM=="net", ACTION=="add", DRIVERS=="?*", ATTR{address}=="<MAC address>", ATTR{dev_id}=="0x0", ATTR{type}=="1", KERNEL=="eth*", NAME="eth0" | |
# USB device 0x:0x (rt2800usb) | |
SUBSYSTEM=="net", ACTION=="add", DRIVERS=="?*", ATTR{address}=="<MAC address>", ATTR{dev_id}=="0x0", ATTR{type}=="1", KERNEL=="wlan*", NAME="wlan1" | |
##### dmesg ##### | |
[ 19.306015] Bluetooth: hci0: Intel Bluetooth firmware file: intel/ibt-hw-37.7.10-fw-1.80.2.3.d.bseq | |
[ 19.387337] iwlwifi 0000:01:00.0: irq 61 for MSI/MSI-X | |
[ 19.395870] iwlwifi 0000:01:00.0: loaded firmware version 22.24.8.0 op_mode iwlmvm | |
[ 19.483242] iwlwifi 0000:01:00.0: Detected Intel(R) Wireless N 7260, REV=0x144 | |
[ 19.483344] iwlwifi 0000:01:00.0: L1 Disabled; Enabling L0S (repeated 2 times) | |
[ 19.562477] Bluetooth: hci0: Intel Bluetooth firmware patch completed and activated | |
[ 19.732420] ieee80211 phy0: Selected rate control algorithm 'iwl-mvm-rs' | |
[ 21.018121] iwlwifi 0000:01:00.0: L1 Disabled; Enabling L0S (repeated 2 times) | |
[ 21.029661] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready | |
[ 21.857407] wlan0: authenticate with <MAC addr ****> | |
[ 21.862358] wlan0: direct probe to <MAC addr ****> (try 1/3) | |
[ 22.065274] wlan0: send auth to <MAC addr ****> (try 2/3) | |
[ 22.067507] wlan0: authenticated | |
[ 22.068681] wlan0: associate with <MAC addr ****> (try 1/3) | |
[ 22.122902] wlan0: RX AssocResp from <MAC addr ****> (capab=0x411 status=0 aid=1) | |
[ 22.133011] wlan0: associated | |
[ 22.133042] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready | |
[ 25.225808] wlan0: deauthenticating from <MAC addr ****> by local choice (reason=3) | |
[ 102.099688] iwlwifi 0000:01:00.0: L1 Disabled; Enabling L0S (repeated 2 times) | |
[ 102.111267] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready | |
[ 102.909898] wlan0: authenticate with <MAC addr ****> | |
[ 102.912243] wlan0: send auth to <MAC addr ****> (try 1/3) | |
[ 102.914704] wlan0: authenticated | |
[ 102.917354] wlan0: associate with <MAC addr ****> (try 1/3) | |
[ 102.921410] wlan0: RX AssocResp from <MAC addr ****> (capab=0x421 status=0 aid=5) | |
[ 102.923026] wlan0: associated | |
[ 102.923060] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready | |
########## wireless info END ############ |
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment