-
Install a working (and compiled) version of virt-viewer. You may view the homebrew package's upstream source on GitHub.
brew tap jeffreywildman/homebrew-virt-manager brew install virt-viewer
-
Once that's installed should be able make a call
remote-viewer
with a pve-spice.vv file downloaded from proxmox web interface
The suggested way to pair your devices is to enable zigbee2mqtt's permit_join
option from within Home Assistant using MQTT rather than through the add-on's User Interface. Below is an example configuration that will allow you to enable and disable device pairing from the Home Assistant front end:
mqtt:
broker: homeassistant # This will have to be your mqtt broker
discovery: true
DB
ovs-vsctl list open_vswitch
ovs-vsctl list interface
ovs-vsctl list interface vxlan-ac000344
ovs-vsctl --columns=options list interface vxlan-ac000344
ovs-vsctl --columns=ofport,name list Interface
ovs-vsctl --columns=ofport,name --format=table list Interface
ovs-vsctl -f csv --no-heading --columns=_uuid list controller
ovs-vsctl -f csv --no-heading -d bare --columns=other_config list port