smartctl

gistfile1.txt

root@Anubis:~# smartctl -x /dev/sdc
smartctl 7.1 2019-12-30 r5022 [x86_64-linux-4.19.107-Unraid] (local build)
Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Vendor:               SAMSUNG
Product:              MZ6ER200HAGM/003
Revision:             DM0L
Compliance:           SPC-4
User Capacity:        200,049,647,616 bytes [200 GB]
Logical block size:   512 bytes
Physical block size:  8192 bytes
LU is resource provisioned, LBPRZ=1
Rotation Rate:        Solid State Device
Form Factor:          2.5 inches
Logical Unit id:      0x5002538475b01c50
Serial number:        SXXXXXXXXXXXXX
Device type:          disk
Transport protocol:   SAS (SPL-3)
Local Time is:        Tue Aug 18 16:39:56 2020 PDT
SMART support is:     Available - device has SMART capability.
SMART support is:     Enabled
Temperature Warning:  Enabled
Read Cache is:        Enabled
Writeback Cache is:   Enabled

=== START OF READ SMART DATA SECTION ===
SMART Health Status: FAILURE PREDICTION THRESHOLD EXCEEDED: ascq=0x73 [asc=5d, ascq=73]

Percentage used endurance indicator: 0%
Current Drive Temperature:     38 C
Drive Trip Temperature:        58 C

Manufactured in week 29 of year 2015
Accumulated start-stop cycles:  40
Specified load-unload count over device lifetime:  0
Accumulated load-unload cycles:  0
Elements in grown defect list: 0

Error counter log:
           Errors Corrected by           Total   Correction     Gigabytes    Total
               ECC          rereads/    errors   algorithm      processed    uncorrected
           fast | delayed   rewrites  corrected  invocations   [10^9 bytes]  errors
read:          0        0         0         0          0        980.793           0
write:         0        0         0         0          0        873.183           0

Non-medium error count:      212

No Self-tests have been logged

Background scan results log
  Status: scan is active
    Accumulated power on time, hours:minutes 427:20 [25640 minutes]
    Number of background scans performed: 0,  scan progress: 59.45%
    Number of background medium scans performed: 0

Protocol Specific port log page for SAS SSP
relative target port id = 1
  generation code = 3
  number of phys = 2
  phy identifier = 0
    attached device type: SAS or SATA device
    attached reason: power on
    reason: loss of dword synchronization
    negotiated logical link rate: phy enabled; 6 Gbps
    attached initiator port: ssp=1 stp=1 smp=1
    attached target port: ssp=0 stp=0 smp=0
    SAS address = 0x5002538475b01c52
    attached SAS address = 0x500062b0002cbe60
    attached phy identifier = 0
    Invalid DWORD count = 118453
    Running disparity error count = 118965
    Loss of DWORD synchronization = 5
    Phy reset problem = 0
    Phy event descriptors:
     Received ERROR  count: 0
     Received address frame error count: 0
     Received abandon-class OPEN_REJECT count: 0
     Received retry-class OPEN_REJECT count: 1
     Received SSP frame error count: 0
relative target port id = 2
  generation code = 3
  number of phys = 1
  phy identifier = 1
    attached device type: no device attached
    attached reason: unknown
    reason: power on
    negotiated logical link rate: phy enabled; unknown
    attached initiator port: ssp=0 stp=0 smp=0
    attached target port: ssp=0 stp=0 smp=0
    SAS address = 0x5002538475b01c53
    attached SAS address = 0x0
    attached phy identifier = 0
    Invalid DWORD count = 0
    Running disparity error count = 0
    Loss of DWORD synchronization = 0
    Phy reset problem = 0
    Phy event descriptors:
     Received ERROR  count: 0
     Received address frame error count: 0
     Received abandon-class OPEN_REJECT count: 0
     Received retry-class OPEN_REJECT count: 0
     Received SSP frame error count: 0