Last active
April 18, 2016 10:39
-
-
Save s-light/e310695ec7614d578f4e629ba5baeca5 to your computer and use it in GitHub Desktop.
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
| RomBOOT | |
| AT91Bootstrap 3.7 (Fr 12. Feb 19:04:07 CET 2016) | |
| 1-Wire: Loading 1-Wire information ... | |
| 1-Wire: ROM Searching ... Done, 0x0 1-Wire chips found | |
| WARNING: 1-Wire: No 1-Wire chip found | |
| 1-Wire: Using default information | |
| 1-Wire: SYS_GPBR2: 0x4010425, SYS_GPBR3: 0x8421 | |
| SD/MMC: Image: Read file zImage to 0x22000000 | |
| SD: Card Capacity: High or Extended | |
| SD: Specification Version 3.0X | |
| SD/MMC: dt blob: Read file at91-ariag25.dtb to 0x21000000 | |
| SD: Card Capacity: High or Extended | |
| SD: Specification Version 3.0X | |
| Booting zImage ...... | |
| zImage magic: 0x16f2818 is found | |
| Using device tree in place at 0x21000000 | |
| Starting linux kernel ..., machid: 0xffffffff | |
| Booting Linux on physical CPU 0x0 | |
| Linux version 4.2.6+ (stefan@stefan-latitude) (gcc version 5.2.1 20151010 (Ubuntu 5.2.1-22ubuntu1) ) #2 Tue Feb 2 11:42:05 CET 2016 | |
| CPU: ARM926EJ-S [41069265] revision 5 (ARMv5TEJ), cr=0005317f | |
| CPU: VIVT data cache, VIVT instruction cache | |
| Machine model: Acme Systems Aria G25 | |
| Memory policy: Data cache writeback | |
| Built 1 zonelists in Zone order, mobility grouping on. Total pages: 32512 | |
| Kernel command line: console=ttyS0,115200 root=/dev/mmcblk0p2 rw rootwait | |
| PID hash table entries: 512 (order: -1, 2048 bytes) | |
| Dentry cache hash table entries: 16384 (order: 4, 65536 bytes) | |
| Inode-cache hash table entries: 8192 (order: 3, 32768 bytes) | |
| Memory: 123116K/131072K available (4633K kernel code, 184K rwdata, 1504K rodata, 188K init, 131K bss, 7956K reserved, 0K cma-reserved) | |
| Virtual kernel memory layout: | |
| vector : 0xffff0000 - 0xffff1000 ( 4 kB) | |
| fixmap : 0xffc00000 - 0xfff00000 (3072 kB) | |
| vmalloc : 0xc8800000 - 0xff000000 ( 872 MB) | |
| lowmem : 0xc0000000 - 0xc8000000 ( 128 MB) | |
| modules : 0xbf000000 - 0xc0000000 ( 16 MB) | |
| .text : 0xc0008000 - 0xc0606838 (6139 kB) | |
| .init : 0xc0607000 - 0xc0636000 ( 188 kB) | |
| .data : 0xc0636000 - 0xc06641c0 ( 185 kB) | |
| .bss : 0xc06641c0 - 0xc068503c ( 132 kB) | |
| NR_IRQS:16 nr_irqs:16 16 | |
| clocksource: pit: mask: 0x7ffffff max_cycles: 0x7ffffff, max_idle_ns: 7167226906 ns | |
| sched_clock: 32 bits at 128 Hz, resolution 7812500ns, wraps every 16777215996093750ns | |
| Console: colour dummy device 80x30 | |
| Calibrating delay loop... 198.76 BogoMIPS (lpj=775168) | |
| pid_max: default: 32768 minimum: 301 | |
| Mount-cache hash table entries: 1024 (order: 0, 4096 bytes) | |
| Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes) | |
| CPU: Testing write buffer coherency: ok | |
| Setting up static identity map for 0x20008400 - 0x2000847c | |
| devtmpfs: initialized | |
| clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 14931722236523437 ns | |
| pinctrl core: initialized pinctrl subsystem | |
| NET: Registered protocol family 16 | |
| DMA: preallocated 256 KiB pool for atomic coherent allocations | |
| AT91: Detected SoC family: at91sam9x5 | |
| AT91: Detected SoC: at91sam9g25, revision 1 | |
| No ATAGs? | |
| gpio-at91 fffff400.gpio: at address c8856400 | |
| gpio-at91 fffff600.gpio: at address c8858600 | |
| gpio-at91 fffff800.gpio: at address c885a800 | |
| gpio-at91 fffffa00.gpio: at address c885ca00 | |
| pinctrl-at91 ahb:apb:pinctrl@fffff400: initialized AT91 pinctrl driver | |
| clocksource: tcb_clksrc: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 114675631333 ns | |
| at_hdmac ffffec00.dma-controller: Atmel AHB DMA Controller ( cpy slave sg-cpy ), 8 channels | |
| at_hdmac ffffee00.dma-controller: Atmel AHB DMA Controller ( cpy slave sg-cpy ), 8 channels | |
| SCSI subsystem initialized | |
| usbcore: registered new interface driver usbfs | |
| usbcore: registered new interface driver hub | |
| usbcore: registered new device driver usb | |
| at91_i2c f8010000.i2c: using dma0chan0 (tx) and dma0chan1 (rx) for DMA transfers | |
| at91_i2c f8010000.i2c: Using FIFO (16 data) | |
| at91_i2c f8010000.i2c: AT91 i2c bus driver (hw version: 0x402). | |
| at91_i2c f8014000.i2c: using dma1chan0 (tx) and dma1chan1 (rx) for DMA transfers | |
| at91_i2c f8014000.i2c: Using FIFO (16 data) | |
| at91_i2c f8014000.i2c: AT91 i2c bus driver (hw version: 0x402). | |
| Advanced Linux Sound Architecture Driver Initialized. | |
| clocksource: Switched to clocksource tcb_clksrc | |
| NET: Registered protocol family 2 | |
| TCP established hash table entries: 1024 (order: 0, 4096 bytes) | |
| TCP bind hash table entries: 1024 (order: 0, 4096 bytes) | |
| TCP: Hash tables configured (established 1024 bind 1024) | |
| UDP hash table entries: 256 (order: 0, 4096 bytes) | |
| UDP-Lite hash table entries: 256 (order: 0, 4096 bytes) | |
| NET: Registered protocol family 1 | |
| RPC: Registered named UNIX socket transport module. | |
| RPC: Registered udp transport module. | |
| RPC: Registered tcp transport module. | |
| RPC: Registered tcp NFSv4.1 backchannel transport module. | |
| futex hash table entries: 256 (order: -1, 3072 bytes) | |
| NET: Registered protocol family 38 | |
| io scheduler noop registered (default) | |
| fffff200.serial: ttyS0 at MMIO 0xfffff200 (irq = 16, base_baud = 8333333) is a ATMEL_SERIAL | |
| console [ttyS0] enabled | |
| f801c000.serial: ttyS1 at MMIO 0xf801c000 (irq = 29, base_baud = 8333333) is a ATMEL_SERIAL | |
| f8020000.serial: ttyS2 at MMIO 0xf8020000 (irq = 30, base_baud = 8333333) is a ATMEL_SERIAL | |
| f8024000.serial: ttyS3 at MMIO 0xf8024000 (irq = 31, base_baud = 8333333) is a ATMEL_SERIAL | |
| f8028000.serial: ttyS4 at MMIO 0xf8028000 (irq = 36, base_baud = 8333333) is a ATMEL_SERIAL | |
| brd: module loaded | |
| loop: module loaded | |
| atmel_spi f0000000.spi: version: 0x212 | |
| atmel_spi f0000000.spi: Using dma0chan2 (tx) and dma0chan3 (rx) for DMA transfers | |
| atmel_spi f0000000.spi: Atmel SPI Controller at 0xf0000000 (irq 35) | |
| spidev spi32766.0: buggy DT: spidev listed directly in DT | |
| ------------[ cut here ]------------ | |
| WARNING: CPU: 0 PID: 1 at drivers/spi/spidev.c:719 spidev_probe+0x160/0x198() | |
| Modules linked in: | |
| CPU: 0 PID: 1 Comm: swapper Not tainted 4.2.6+ #2 | |
| Hardware name: Atmel AT91SAM9 | |
| [<c000e994>] (unwind_backtrace) from [<c000c8dc>] (show_stack+0x10/0x14) | |
| [<c000c8dc>] (show_stack) from [<c0016334>] (warn_slowpath_common+0x78/0xa0) | |
| [<c0016334>] (warn_slowpath_common) from [<c00163ec>] (warn_slowpath_null+0x18/0x20) | |
| [<c00163ec>] (warn_slowpath_null) from [<c02672e8>] (spidev_probe+0x160/0x198) | |
| [<c02672e8>] (spidev_probe) from [<c0265304>] (spi_drv_probe+0x50/0x68) | |
| [<c0265304>] (spi_drv_probe) from [<c0219db4>] (driver_probe_device+0xf8/0x264) | |
| [<c0219db4>] (driver_probe_device) from [<c0218874>] (bus_for_each_drv+0x84/0x94) | |
| [<c0218874>] (bus_for_each_drv) from [<c0219c34>] (__device_attach+0x74/0xd8) | |
| [<c0219c34>] (__device_attach) from [<c0219408>] (bus_probe_device+0x24/0x7c) | |
| [<c0219408>] (bus_probe_device) from [<c0217bac>] (device_add+0x3e4/0x4f0) | |
| [<c0217bac>] (device_add) from [<c026592c>] (spi_add_device+0xd0/0x124) | |
| [<c026592c>] (spi_add_device) from [<c0266a80>] (spi_register_master+0x594/0x69c) | |
| [<c0266a80>] (spi_register_master) from [<c0266bb4>] (devm_spi_register_master+0x2c/0x64) | |
| [<c0266bb4>] (devm_spi_register_master) from [<c0268d48>] (atmel_spi_probe+0x4a0/0x5a8) | |
| [<c0268d48>] (atmel_spi_probe) from [<c021b56c>] (platform_drv_probe+0x48/0x94) | |
| [<c021b56c>] (platform_drv_probe) from [<c0219db4>] (driver_probe_device+0xf8/0x264) | |
| [<c0219db4>] (driver_probe_device) from [<c0219f88>] (__driver_attach+0x68/0x88) | |
| [<c0219f88>] (__driver_attach) from [<c02187b8>] (bus_for_each_dev+0x6c/0x90) | |
| [<c02187b8>] (bus_for_each_dev) from [<c021960c>] (bus_add_driver+0xc8/0x1dc) | |
| [<c021960c>] (bus_add_driver) from [<c021a734>] (driver_register+0x9c/0xe0) | |
| [<c021a734>] (driver_register) from [<c0009638>] (do_one_initcall+0x114/0x1d0) | |
| [<c0009638>] (do_one_initcall) from [<c0607d50>] (kernel_init_freeable+0x100/0x1bc) | |
| [<c0607d50>] (kernel_init_freeable) from [<c0464064>] (kernel_init+0x8/0xe0) | |
| [<c0464064>] (kernel_init) from [<c000a260>] (ret_from_fork+0x14/0x34) | |
| ---[ end trace b6482c506600ebdc ]--- | |
| spidev spi32766.1: buggy DT: spidev listed directly in DT | |
| ------------[ cut here ]------------ | |
| WARNING: CPU: 0 PID: 1 at drivers/spi/spidev.c:719 spidev_probe+0x160/0x198() | |
| Modules linked in: | |
| CPU: 0 PID: 1 Comm: swapper Tainted: G W 4.2.6+ #2 | |
| Hardware name: Atmel AT91SAM9 | |
| [<c000e994>] (unwind_backtrace) from [<c000c8dc>] (show_stack+0x10/0x14) | |
| [<c000c8dc>] (show_stack) from [<c0016334>] (warn_slowpath_common+0x78/0xa0) | |
| [<c0016334>] (warn_slowpath_common) from [<c00163ec>] (warn_slowpath_null+0x18/0x20) | |
| [<c00163ec>] (warn_slowpath_null) from [<c02672e8>] (spidev_probe+0x160/0x198) | |
| [<c02672e8>] (spidev_probe) from [<c0265304>] (spi_drv_probe+0x50/0x68) | |
| [<c0265304>] (spi_drv_probe) from [<c0219db4>] (driver_probe_device+0xf8/0x264) | |
| [<c0219db4>] (driver_probe_device) from [<c0218874>] (bus_for_each_drv+0x84/0x94) | |
| [<c0218874>] (bus_for_each_drv) from [<c0219c34>] (__device_attach+0x74/0xd8) | |
| [<c0219c34>] (__device_attach) from [<c0219408>] (bus_probe_device+0x24/0x7c) | |
| [<c0219408>] (bus_probe_device) from [<c0217bac>] (device_add+0x3e4/0x4f0) | |
| [<c0217bac>] (device_add) from [<c026592c>] (spi_add_device+0xd0/0x124) | |
| [<c026592c>] (spi_add_device) from [<c0266a80>] (spi_register_master+0x594/0x69c) | |
| [<c0266a80>] (spi_register_master) from [<c0266bb4>] (devm_spi_register_master+0x2c/0x64) | |
| [<c0266bb4>] (devm_spi_register_master) from [<c0268d48>] (atmel_spi_probe+0x4a0/0x5a8) | |
| [<c0268d48>] (atmel_spi_probe) from [<c021b56c>] (platform_drv_probe+0x48/0x94) | |
| [<c021b56c>] (platform_drv_probe) from [<c0219db4>] (driver_probe_device+0xf8/0x264) | |
| [<c0219db4>] (driver_probe_device) from [<c0219f88>] (__driver_attach+0x68/0x88) | |
| [<c0219f88>] (__driver_attach) from [<c02187b8>] (bus_for_each_dev+0x6c/0x90) | |
| [<c02187b8>] (bus_for_each_dev) from [<c021960c>] (bus_add_driver+0xc8/0x1dc) | |
| [<c021960c>] (bus_add_driver) from [<c021a734>] (driver_register+0x9c/0xe0) | |
| [<c021a734>] (driver_register) from [<c0009638>] (do_one_initcall+0x114/0x1d0) | |
| [<c0009638>] (do_one_initcall) from [<c0607d50>] (kernel_init_freeable+0x100/0x1bc) | |
| [<c0607d50>] (kernel_init_freeable) from [<c0464064>] (kernel_init+0x8/0xe0) | |
| [<c0464064>] (kernel_init) from [<c000a260>] (ret_from_fork+0x14/0x34) | |
| ---[ end trace b6482c506600ebdd ]--- | |
| macb f802c000.ethernet: invalid hw address, using random | |
| libphy: MACB_mii_bus: probed | |
| macb f802c000.ethernet eth0: Cadence MACB rev 0x0001010c at 0xf802c000 irq 37 (ce:ae:6f:b9:32:af) | |
| macb f802c000.ethernet eth0: attached PHY driver [Generic PHY] (mii_bus:phy_addr=f802c000.etherne:01, irq=-1) | |
| usbcore: registered new interface driver rt2500usb | |
| usbcore: registered new interface driver rt73usb | |
| usbcore: registered new interface driver rt2800usb | |
| ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver | |
| ehci-atmel: EHCI Atmel driver | |
| atmel-ehci 700000.ehci: EHCI Host Controller | |
| atmel-ehci 700000.ehci: new USB bus registered, assigned bus number 1 | |
| atmel-ehci 700000.ehci: irq 38, io mem 0x00700000 | |
| atmel-ehci 700000.ehci: USB 2.0 started, EHCI 1.00 | |
| usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 | |
| usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 | |
| usb usb1: Product: EHCI Host Controller | |
| usb usb1: Manufacturer: Linux 4.2.6+ ehci_hcd | |
| usb usb1: SerialNumber: 700000.ehci | |
| hub 1-0:1.0: USB hub found | |
| hub 1-0:1.0: 3 ports detected | |
| ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver | |
| ohci-atmel: OHCI Atmel driver | |
| at91_ohci 600000.ohci: USB Host Controller | |
| at91_ohci 600000.ohci: new USB bus registered, assigned bus number 2 | |
| at91_ohci 600000.ohci: irq 38, io mem 0x00600000 | |
| usb usb2: New USB device found, idVendor=1d6b, idProduct=0001 | |
| usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 | |
| usb usb2: Product: USB Host Controller | |
| usb usb2: Manufacturer: Linux 4.2.6+ ohci_hcd | |
| usb usb2: SerialNumber: at91 | |
| hub 2-0:1.0: USB hub found | |
| hub 2-0:1.0: 3 ports detected | |
| usbcore: registered new interface driver cdc_acm | |
| cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters | |
| usbcore: registered new interface driver usb-storage | |
| usbcore: registered new interface driver usbserial | |
| usbcore: registered new interface driver usbserial_generic | |
| usbserial: USB Serial support registered for generic | |
| usbcore: registered new interface driver ftdi_sio | |
| usbserial: USB Serial support registered for FTDI USB Serial Device | |
| usbcore: registered new interface driver pl2303 | |
| usbserial: USB Serial support registered for pl2303 | |
| mousedev: PS/2 mouse device common for all mice | |
| rtc rtc0: alarm rollover not handled | |
| rtc rtc0: invalid alarm value: 1900-1-1 0:0:0 | |
| at91_rtc fffffeb0.rtc: rtc core: registered fffffeb0.rtc as rtc0 | |
| at91_rtc fffffeb0.rtc: AT91 Real Time Clock driver. | |
| i2c /dev entries driver | |
| Driver for 1-wire Dallas network protocol. | |
| AT91: Starting after wakeup | |
| atmel_mci f0008000.mmc: version: 0x504 | |
| atmel_mci f0008000.mmc: using dma0chan4 for DMA transfers | |
| atmel_mci f0008000.mmc: No vmmc regulator found | |
| atmel_mci f0008000.mmc: No vqmmc regulator found | |
| atmel_mci f0008000.mmc: Atmel MCI controller at 0xf0008000 irq 28, 1 slots | |
| usbcore: registered new interface driver usbhid | |
| usbhid: USB HID core driver | |
| iio iio:device0: Resolution used: 10 bits | |
| iio iio:device0: ADC Touch screen is disabled. | |
| NET: Registered protocol family 10 | |
| sit: IPv6 over IPv4 tunneling driver | |
| NET: Registered protocol family 17 | |
| at91_rtc fffffeb0.rtc: setting system clock to 2007-01-01 00:00:05 UTC (1167609605) | |
| ALSA device list: | |
| No soundcards found. | |
| Waiting for root device /dev/mmcblk0p2... | |
| mmc0: host does not support reading read-only switch, assuming write-enable | |
| mmc0: new high speed SDHC card at address 59b4 | |
| mmcblk0: mmc0:59b4 00000 7.47 GiB | |
| mmcblk0: p1 p2 | |
| EXT4-fs (mmcblk0p2): couldn't mount as ext3 due to feature incompatibilities | |
| EXT4-fs (mmcblk0p2): couldn't mount as ext2 due to feature incompatibilities | |
| EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null) | |
| VFS: Mounted root (ext4 filesystem) on device 179:2. | |
| devtmpfs: mounted | |
| Freeing unused kernel memory: 188K (c0607000 - c0636000) | |
| random: systemd urandom read with 15 bits of entropy available | |
| systemd[1]: systemd 215 running in system mode. (+PAM +AUDIT +SELINUX +IMA +SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ -SECCOMP -APPARMOR) | |
| systemd[1]: Detected architecture 'arm'. | |
| Welcome to [1mDebian GNU/Linux 8 (jessie)! | |
| systemd[1]: Set hostname to <aria>. | |
| systemd[1]: Cannot add dependency job for unit display-manager.service, ignoring: Unit display-manager.service failed to load: No such file or directory. | |
| systemd[1]: Starting Forward Password Requests to Wall Directory Watch. | |
| systemd[1]: Started Forward Password Requests to Wall Directory Watch. | |
| systemd[1]: Expecting device dev-ttyS0.device... | |
| Expecting device dev-ttyS0.device... | |
| systemd[1]: Starting Remote File Systems (Pre). | |
| [ OK ] Reached target Remote File Systems (Pre). | |
| systemd[1]: Reached target Remote File Systems (Pre). | |
| systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. | |
| systemd[1]: Starting Dispatch Password Requests to Console Directory Watch. | |
| systemd[1]: Started Dispatch Password Requests to Console Directory Watch. | |
| systemd[1]: Starting Paths. | |
| [ OK ] Reached target Paths. | |
| systemd[1]: Reached target Paths. | |
| systemd[1]: Starting Encrypted Volumes. | |
| [ OK ] Reached target Encrypted Volumes. | |
| systemd[1]: Reached target Encrypted Volumes. | |
| systemd[1]: Starting Swap. | |
| [ OK ] Reached target Swap. | |
| systemd[1]: Reached target Swap. | |
| systemd[1]: Expecting device dev-mmcblk0p1.device... | |
| Expecting device dev-mmcblk0p1.device... | |
| systemd[1]: Starting Root Slice. | |
| [ OK ] Created slice Root Slice. | |
| systemd[1]: Created slice Root Slice. | |
| systemd[1]: Starting User and Session Slice. | |
| [ OK ] Created slice User and Session Slice. | |
| systemd[1]: Created slice User and Session Slice. | |
| systemd[1]: Starting /dev/initctl Compatibility Named Pipe. | |
| [ OK ] Listening on /dev/initctl Compatibility Named Pipe. | |
| systemd[1]: Listening on /dev/initctl Compatibility Named Pipe. | |
| systemd[1]: Starting Delayed Shutdown Socket. | |
| [ OK ] Listening on Delayed Shutdown Socket. | |
| systemd[1]: Listening on Delayed Shutdown Socket. | |
| systemd[1]: Starting Journal Socket (/dev/log). | |
| [ OK ] Listening on Journal Socket (/dev/log). | |
| systemd[1]: Listening on Journal Socket (/dev/log). | |
| systemd[1]: Starting udev Control Socket. | |
| [ OK ] Listening on udev Control Socket. | |
| systemd[1]: Listening on udev Control Socket. | |
| systemd[1]: Starting udev Kernel Socket. | |
| [ OK ] Listening on udev Kernel Socket. | |
| systemd[1]: Listening on udev Kernel Socket. | |
| systemd[1]: Starting Journal Socket. | |
| [ OK ] Listening on Journal Socket. | |
| systemd[1]: Listening on Journal Socket. | |
| systemd[1]: Starting System Slice. | |
| [ OK ] Created slice System Slice. | |
| systemd[1]: Created slice System Slice. | |
| systemd[1]: Started File System Check on Root Device. | |
| systemd[1]: Starting system-getty.slice. | |
| [ OK ] Created slice system-getty.slice. | |
| systemd[1]: Created slice system-getty.slice. | |
| systemd[1]: Starting system-serial\x2dgetty.slice. | |
| [ OK ] Created slice system-serial\x2dgetty.slice. | |
| systemd[1]: Created slice system-serial\x2dgetty.slice. | |
| systemd[1]: Started Create list of required static device nodes for the current kernel. | |
| systemd[1]: Started Set Up Additional Binary Formats. | |
| systemd[1]: Starting Create Static Device Nodes in /dev... | |
| Starting Create Static Device Nodes in /dev... | |
| systemd[1]: Starting udev Coldplug all Devices... | |
| Starting udev Coldplug all Devices... | |
| systemd[1]: Mounted Huge Pages File System. | |
| systemd[1]: Mounted POSIX Message Queue File System. | |
| systemd[1]: Mounting Debug File System... | |
| Mounting Debug File System... | |
| systemd[1]: Starting Load Kernel Modules... | |
| Starting Load Kernel Modules... | |
| systemd[1]: Starting Journal Service... | |
| Starting Journal Service... | |
| [ OK ] Started Journal Service. | |
| systemd[1]: Started Journal Service. | |
| [ OK ] Reached target Slices. | |
| Starting Remount Root and Kernel File Systems... | |
| [ OK ] Mounted Debug File System. | |
| [ OK ] Started Create Static Device Nodes in /dev. | |
| [ OK ] Started Load Kernel Modules. | |
| EXT4-fs (mmcblk0p2): re-mounted. Opts: (null) | |
| [ OK ] Started Remount Root and Kernel File Systems. | |
| [ OK ] Started udev Coldplug all Devices. | |
| Starting Load/Save Random Seed... | |
| Mounting Configuration File System... | |
| Starting Apply Kernel Variables... | |
| Starting udev Kernel Device Manager... | |
| [ OK ] Reached target Local File Systems (Pre). | |
| [ OK ] Mounted Configuration File System. | |
| [ OK ] Started Load/Save Random Seed. | |
| systemd-udevd[982]: starting version 215 | |
| [ OK ] Started udev Kernel Device Manager. | |
| [ OK ] Started Apply Kernel Variables. | |
| Starting Copy rules generated while the root was ro... | |
| [ OK ] Started Copy rules generated while the root was ro. | |
| [ OK ] Found device /dev/ttyS0. | |
| [ OK ] Found device /dev/mmcblk0p1. | |
| Mounting /boot... | |
| [ OK ] Created slice system-ifup.slice. | |
| FAT-fs (mmcblk0p1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck. | |
| [ OK ] Mounted /boot. | |
| [ OK ] Reached target Local File Systems. | |
| Starting Create Volatile Files and Directories... | |
| [ OK ] Reached target Remote File Systems. | |
| Starting Trigger Flushing of Journal to Persistent Storage... | |
| Starting LSB: Raise network interfaces.... | |
| systemd-journald[586]: Received request to flush runtime journal from PID 1 | |
| [ OK ] Started Trigger Flushing of Journal to Persistent Storage. | |
| random: nonblocking pool is initialized | |
| [ OK ] Started Create Volatile Files and Directories. | |
| Starting Update UTMP about System Boot/Shutdown... | |
| [ OK ] Started Update UTMP about System Boot/Shutdown. | |
| IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready | |
| macb f802c000.ethernet eth0: link up (100/Full) | |
| IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready | |
| [* ] A start job is running for LSB: Raise network interf...11s / no limit) | |
| [K[** ] A start job is running for LSB: Raise network interf...12s / no limit) | |
| [K[*** ] A start job is running for LSB: Raise network interf...12s / no limit) | |
| [K[ *** ] A start job is running for LSB: Raise network interf...13s / no limit) | |
| [K[ *** ] A start job is running for LSB: Raise network interf...13s / no limit) | |
| [K[ ***] A start job is running for LSB: Raise network interf...14s / no limit) | |
| [K[ **] A start job is running for LSB: Raise network interf...14s / no limit) | |
| [K[ OK ] Started LSB: Raise network interfaces.. | |
| Starting ifup for eth0... | |
| [ OK ] Started ifup for eth0. | |
| [ OK ] Reached target Network. | |
| [ OK ] Reached target Network is Online. | |
| [ OK ] Reached target System Initialization. | |
| [ OK ] Listening on Avahi mDNS/DNS-SD Stack Activation Socket. | |
| [ OK ] Listening on D-Bus System Message Bus Socket. | |
| [ OK ] Reached target Sockets. | |
| [ OK ] Reached target Timers. | |
| [ OK ] Reached target Basic System. | |
| Starting OpenBSD Secure Shell server... | |
| [ OK ] Started OpenBSD Secure Shell server. | |
| Starting /etc/rc.local Compatibility... | |
| Starting Login Service... | |
| Starting LSB: Start NTP daemon... | |
| Starting Avahi mDNS/DNS-SD Stack... | |
| Starting D-Bus System Message Bus... | |
| [ OK ] Started D-Bus System Message Bus. | |
| [ OK ] Started Avahi mDNS/DNS-SD Stack. | |
| Starting Permit User Sessions... | |
| [ OK ] Started /etc/rc.local Compatibility. | |
| [ OK ] Started LSB: Start NTP daemon. | |
| [ OK ] Started Permit User Sessions. | |
| Starting Getty on tty1... | |
| [ OK ] Started Getty on tty1. | |
| Starting Serial Getty on ttyS0... | |
| [ OK ] Started Serial Getty on ttyS0. | |
| [ OK ] Reached target Login Prompts. | |
| [ OK ] Started Login Service. | |
| [ OK ] Reached target Multi-User System. | |
| [ OK ] Reached target Graphical Interface. | |
| Starting Update UTMP about System Runlevel Changes... | |
| [ OK ] Started Update UTMP about System Runlevel Changes. | |
| Debian GNU/Linux 8 aria ttyS0 | |
| aria login: light | |
| Password: | |
| Last login: Mon Jan 1 01:01:57 CET 2007 on ttyS0 | |
| Linux aria 4.2.6+ #2 Tue Feb 2 11:42:05 CET 2016 armv5tejl | |
| The programs included with the Debian GNU/Linux system are free software; | |
| the exact distribution terms for each program are described in the | |
| individual files in /usr/share/doc/*/copyright. | |
| Debian GNU/Linux comes with ABSOLUTELY NO WARRANTY, to the extent | |
| permitted by applicable law. | |
| light@aria:~$ | |
| light@aria:~$ sudo ifconfig | |
| [sudo] password for light: | |
| eth0 Link encap:Ethernet HWaddr 40:42:42:00:00:01 | |
| inet addr:192.168.178.80 Bcast:192.168.178.255 Mask:255.255.255.0 | |
| inet6 addr: fe80::4242:42ff:fe00:1/64 Scope:Link | |
| inet6 addr: 2a02:810d:8ac0:5a14:4242:42ff:fe00:1/64 Scope:Global | |
| inet6 addr: 4006:9094:c0a8:b272:4242:42ff:fe00:1/64 Scope:Global | |
| UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 | |
| RX packets:32 errors:0 dropped:0 overruns:0 frame:0 | |
| TX packets:59 errors:0 dropped:0 overruns:0 carrier:0 | |
| collisions:0 txqueuelen:1000 | |
| RX bytes:4225 (4.1 KiB) TX bytes:8793 (8.5 KiB) | |
| Interrupt:37 Base address:0xc000 | |
| lo Link encap:Local Loopback | |
| inet addr:127.0.0.1 Mask:255.0.0.0 | |
| inet6 addr: ::1/128 Scope:Host | |
| UP LOOPBACK RUNNING MTU:65536 Metric:1 | |
| RX packets:0 errors:0 dropped:0 overruns:0 frame:0 | |
| TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 | |
| collisions:0 txqueuelen:0 | |
| RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) | |
| light@aria:~$ | |
| light@aria:~$ sudo ifdown eth0 | |
| Killed old client process | |
| Internet Systems Consortium DHCP Client 4.3.1 | |
| Copyright 2004-2014 Internet Systems Consortium. | |
| All rights reserved. | |
| For info, please visit https://www.isc.org/software/dhcp/ | |
| Listening on LPF/eth0/40:42:42:00:00:01 | |
| Sending on LPF/eth0/40:42:42:00:00:01 | |
| Sending on Socket/fallback | |
| DHCPRELEASE on eth0 to 192.168.178.1 port 67 | |
| Restarting ntp (via systemctl): ntp.service. | |
| macb f802c000.ethernet eth0: link down | |
| light@aria:~$ | |
| light@aria:~$ sudo ifup eth0 | |
| sudo: unable to resolve host aria | |
| Internet Systems Consortium DHCP Client 4.3.1 | |
| Copyright 2004-2014 Internet Systems Consortium. | |
| All rights reserved. | |
| For info, please visit https://www.isc.org/software/dhcp/ | |
| IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready | |
| Listening on LPF/eth0/40:42:42:00:00:01 | |
| Sending on LPF/eth0/40:42:42:00:00:01 | |
| Sending on Socket/fallback | |
| DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 5 | |
| macb f802c000.ethernet eth0: link up (100/Full) | |
| IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready | |
| DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 7 | |
| DHCPREQUEST on eth0 to 255.255.255.255 port 67 | |
| DHCPOFFER from 192.168.178.1 | |
| DHCPACK from 192.168.178.1 | |
| Restarting ntp (via systemctl): ntp.service. | |
| bound to 192.168.178.80 -- renewal in 396413 seconds. | |
| light@aria:~$ | |
| light@aria:~$ sudo shutdown -h -H now | |
| [ OK ] Removed slice system-ifup.slice. | |
| [ OK ] Stopped target Graphical Interface. | |
| [ OK ] Stopped target Multi-User System. | |
| Stopping OpenBSD Secure Shell server... | |
| [ OK ] Stopped target Login Prompts. | |
| Stopping Getty on tty1... | |
| Stopping Serial Getty on ttyS0... | |
| Stopping Login Service... | |
| Stopping LSB: Start NTP daemon... | |
| Stopping Avahi mDNS/DNS-SD Stack... | |
| Stopping D-Bus System Message Bus... | |
| [ OK ] Stopped OpenBSD Secure Shell server. | |
| [ OK ] Stopped Login Service. | |
| [ OK ] Stopped Avahi mDNS/DNS-SD Stack. | |
| [ OK ] Stopped D-Bus System Message Bus. | |
| [ OK ] Stopped Getty on tty1. | |
| [ OK ] Stopped Serial Getty on ttyS0. | |
| [ OK ] Stopped LSB: Start NTP daemon. | |
| [ OK ] Stopped target Network is Online. | |
| [ OK ] Removed slice system-serial\x2dgetty.slice. | |
| [ OK ] Removed slice system-getty.slice. | |
| Stopping /etc/rc.local Compatibility... | |
| [ OK ] Stopped /etc/rc.local Compatibility. | |
| Stopping Permit User Sessions... | |
| [ OK ] Stopped target Network. | |
| [ OK ] Stopped Permit User Sessions. | |
| [ OK ] Stopped target Basic System. | |
| [ OK ] Stopped target Slices. | |
| [ OK ] Removed slice User and Session Slice. | |
| [ OK ] Stopped target Paths. | |
| [ OK ] Stopped target Timers. | |
| [ OK ] Stopped target Sockets. | |
| [ OK ] Closed Avahi mDNS/DNS-SD Stack Activation Socket. | |
| [ OK ] Closed D-Bus System Message Bus Socket. | |
| [ OK ] Stopped target System Initialization. | |
| [ OK ] Stopped target Encrypted Volumes. | |
| Stopping Update UTMP about System Boot/Shutdown... | |
| Stopping Apply Kernel Variables... | |
| [ OK ] Stopped Apply Kernel Variables. | |
| Stopping Load Kernel Modules... | |
| [ OK ] Stopped Load Kernel Modules. | |
| Stopping LSB: Raise network interfaces.... | |
| [ OK ] Stopped target Swap. | |
| [ OK ] Stopped target Remote File Systems. | |
| [ OK ] Stopped target Remote File Systems (Pre). | |
| [ OK ] Stopped Update UTMP about System Boot/Shutdown. | |
| Stopping Create Volatile Files and Directories... | |
| [ OK ] Stopped Create Volatile Files and Directories. | |
| macb f802c000.ethernet eth0: link down | |
| [ OK ] Stopped LSB: Raise network interfaces.. | |
| Stopping Load/Save Random Seed... | |
| [ OK ] Stopped target Local File Systems. | |
| Unmounting /boot... | |
| [ OK ] Stopped Load/Save Random Seed. | |
| [ OK ] Unmounted /boot. | |
| [ OK ] Reached target Unmount All Filesystems. | |
| [ OK ] Stopped target Local File Systems (Pre). | |
| Stopping Create Static Device Nodes in /dev... | |
| [ OK ] Stopped Create Static Device Nodes in /dev. | |
| Stopping Remount Root and Kernel File Systems... | |
| [ OK ] Stopped Remount Root and Kernel File Systems. | |
| [ OK ] Reached target Shutdown. | |
| systemd-shutdown[1]: Sending SIGTERM to remaining processes... | |
| systemd-journald[586]: Received SIGTERM from PID 1 (systemd-shutdow). | |
| systemd-shutdown[1]: Sending SIGKILL to remaining processes... | |
| systemd-shutdown[1]: Unmounting file systems. | |
| systemd-shutdown[1]: Unmounting /sys/kernel/config. | |
| systemd-shutdown[1]: Unmounting /sys/kernel/debug. | |
| EXT4-fs (mmcblk0p2): re-mounted. Opts: (null) | |
| EXT4-fs (mmcblk0p2): re-mounted. Opts: (null) | |
| EXT4-fs (mmcblk0p2): re-mounted. Opts: (null) | |
| systemd-shutdown[1]: All filesystems unmounted. | |
| systemd-shutdown[1]: Deactivating swaps. | |
| systemd-shutdown[1]: All swaps deactivated. | |
| systemd-shutdown[1]: Detaching loop devices. | |
| systemd-shutdown[1]: All loop devices detached. | |
| systemd-shutdown[1]: Detaching DM devices. | |
| systemd-shutdown[1]: All DM devices detached. | |
| systemd-shutdown[1]: Halting system. | |
| reboot: System halted |
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment