- 86Box (obviously)
- A machine manager for 86Box, but this is optional. Check 86box.net for more details.
- A copy of Windows NT 3.51 (Check WinWorld)
- Patience
- Machine Type: Socket 7 (Single Voltage)
- Motherboard: i430FX ASUS P/I-P64TP4XE
- CPU Type: Intel Pentium OverDrive MMX
- CPU Speed: 200MHz
- Memory: 128 MB
- Time Sync: On
- Video: (PCI) ATI Mach64GX
- Memory Size; 4M
- Mouse: Standard PS/2 Mouse
- Buttons: Two
- Type: (ISA) SoundBlaster v1.5
- IO Address:
0x220
- IRQ:
7
- DMA:
1
- Enable OPL: ✅
- Receive Input (SB-MIDI): ✅
- Mode: SLiRP
- Adapter: (PCI) AMD PCnet-PCI II
- LPT1 Device: Generic PostScript Printer
- Serial Port 1: ✅
- Serial Port 2: ✅
- Parallel Port 1: ✅
- HD Controller: Internal
- FD Controller: Internal
- SCSI Controller 1: (ISA) Adaptec AHA-154xC
- IO Address:
0x334
- IRQ:
11
- DMA:
6
- BIOS Address:
C800H
- IO Address:
- 1024MiB Dynamic VHD
- CHS: 2080 16 63
- Bus: SCSI
- ID: 0:00
- Speed: Max
- A: 3.5" 1.44M
- B: 5.25" 1.2M
- D: ATAPI (0:0) @ 32x speed
- NONE
- POST Card: ✅
The CD-ROM will be the IDE Primary Master
- Set Primary Master: Auto
- Set Primary Slave & Both Secondaries: None
- Set Drive A: 1.44M, 3.5 in.
- Set Drive B: 1.2M, 5.25 in.
- Set Boot Sequence: A,C
Windows NT 3.51 does not support ACPI
- Power Management: Disable
- Video Off Option: Always On
- Video Off Method: Blank Screen
- Suspend Switch: Disable
- Disregard Doze Speed and Stdby Speed settings
- Set all settings to Disable
- You will need to use the floppy boot disks to start setup.
- Ensure that the Windows NT 3.51 CD image is also mounted
- All drivers are included with Windows NT 3.51.
- Follow the setup prompts and accept the defaults
- Enjoy!