first_boot_dmesg_bpim64_nixos

dmesg --follow 
[    0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd034]
[    0.000000] Linux version 4.20.0-rc5 (nixbld10@aarch64) (gcc version 7.3.0 (GCC)) #1-NixOS SMP P
REEMPT Sun Dec 2 23:07:55 UTC 2018
[    0.000000] Machine model: BananaPi-M64
[    0.000000] efi: Getting EFI parameters from FDT:
[    0.000000] efi: UEFI not found.
[    0.000000] cma: Reserved 32 MiB at 0x00000000be000000
[    0.000000] NUMA: No NUMA configuration found
[    0.000000] NUMA: Faking a node at [mem 0x0000000040000000-0x00000000bfffffff]
[    0.000000] NUMA: NODE_DATA [mem 0xbdfd7840-0xbdfd8fff]
[    0.000000] Zone ranges:
[    0.000000]   DMA32    [mem 0x0000000040000000-0x00000000bfffffff]
[    0.000000]   Normal   empty
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000040000000-0x00000000bfffffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000040000000-0x00000000bfffffff]
[    0.000000] On node 0 totalpages: 524288
[    0.000000]   DMA32 zone: 8192 pages used for memmap
[    0.000000]   DMA32 zone: 0 pages reserved
[    0.000000]   DMA32 zone: 524288 pages, LIFO batch:63
[    0.000000] psci: probing for conduit method from DT.
[    0.000000] psci: PSCIv0.2 detected in firmware.
[    0.000000] psci: Using standard PSCI v0.2 function IDs
[    0.000000] psci: Trusted OS migration not required
[    0.000000] random: get_random_bytes called from start_kernel+0xb0/0x498 with crng_init=0
[    0.000000] percpu: Embedded 25 pages/cpu @(____ptrval____) s63192 r8192 d31016 u102400
[    0.000000] pcpu-alloc: s63192 r8192 d31016 u102400 alloc=25*4096
[    0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 
[    0.000000] Detected VIPT I-cache on CPU0
[    0.000000] CPU features: enabling workaround for ARM erratum 843419
[    0.000000] CPU features: enabling workaround for ARM erratum 845719
[    0.000000] CPU features: detected: Kernel page table isolation (KPTI)
[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 516096
[    0.000000] Policy zone: DMA32
[    0.000000] Kernel command line: systemConfig=/nix/store/m13rq189zq5jsmyk3d5pisrzry1db2ng-nixos-
system-nixos-19.03.git.7b83d90 init=/nix/store/m13rq189zq5jsmyk3d5pisrzry1db2ng-nixos-system-nixos-
19.03.git.7b83d90/init loglevel=7 cma=32M console=ttyS0,115200n8 console=ttyAMA0,115200n8 console=t
ty0
[    0.000000] Memory: 1993880K/2097152K available (13628K kernel code, 2374K rwdata, 6480K rodata,
 7168K init, 505K bss, 70504K reserved, 32768K cma-reserved)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.000000] ftrace: allocating 48187 entries in 189 pages
[    0.000000] rcu: Preemptible hierarchical RCU implementation.
[    0.000000] rcu:     RCU restricting CPUs from NR_CPUS=384 to nr_cpu_ids=4.
[    0.000000]  Tasks RCU enabled.
[    0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
[    0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[    0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
[    0.000000] GIC: Using split EOI/Deactivate mode
[    0.000000] arch_timer: cp15 timer(s) running at 24.00MHz (phys).
[    0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_i
dle_ns: 440795202592 ns
[    0.000005] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns
[    0.000604] Console: colour dummy device 80x25
[    0.001191] printk: console [tty0] enabled
[    0.001322] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 Bog
oMIPS (lpj=96000)
[    0.001355] pid_max: default: 32768 minimum: 301
[    0.001464] LSM: Security Framework initializing
[    0.001485] Yama: becoming mindful.
[    0.001583] AppArmor: AppArmor initialized
[    0.002962] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
[    0.003665] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
[    0.003732] Mount-cache hash table entries: 4096 (order: 3, 32768 bytes)
[    0.003775] Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes)
[    0.028073] ASID allocator initialised with 32768 entries
[    0.036063] rcu: Hierarchical SRCU implementation.
[    0.048325] EFI services will not be available.
[    0.056244] smp: Bringing up secondary CPUs ...
[    0.089137] Detected VIPT I-cache on CPU1
[    0.089205] CPU1: Booted secondary processor 0x0000000001 [0x410fd034]
[    0.120858] Detected VIPT I-cache on CPU2
[    0.120898] CPU2: Booted secondary processor 0x0000000002 [0x410fd034]
[    0.152908] Detected VIPT I-cache on CPU3
[    0.152943] CPU3: Booted secondary processor 0x0000000003 [0x410fd034]
[    0.153030] smp: Brought up 1 node, 4 CPUs
[    0.153125] SMP: Total of 4 processors activated.
[    0.153144] CPU features: detected: 32-bit EL0 Support
[    0.153162] CPU features: detected: CRC32 instructions
[    0.156155] CPU: All CPU(s) started at EL2
[    0.156186] alternatives: patching kernel code
[    0.157868] devtmpfs: initialized
[    0.163298] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 76450417
85100000 ns
[    0.163367] futex hash table entries: 1024 (order: 4, 65536 bytes)
[    0.165024] pinctrl core: initialized pinctrl subsystem
[    0.166300] DMI not present or invalid.
[    0.166774] NET: Registered protocol family 16
[    0.167350] audit: initializing netlink subsys (disabled)
[    0.167588] audit: type=2000 audit(0.164:1): state=initialized audit_enabled=0 res=1
[    0.168831] cpuidle: using governor menu
[    0.169334] vdso: 2 pages (1 code @ (____ptrval____), 1 data @ (____ptrval____))
[    0.169363] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
[    0.174400] DMA: preallocated 256 KiB pool for atomic allocations
[    0.175474] Serial: AMBA PL011 UART driver
[    0.194557] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[    0.195069] cryptd: max_cpu_qlen set to 1000
[    0.195920] ACPI: Interpreter disabled.
[    0.197017] vgaarb: loaded
[    0.197512] SCSI subsystem initialized
[    0.197696] libata version 3.00 loaded.
[    0.197954] usbcore: registered new interface driver usbfs
[    0.198019] usbcore: registered new interface driver hub
[    0.198103] usbcore: registered new device driver usb
[    0.198927] pps_core: LinuxPPS API ver. 1 registered
[    0.198944] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux
.it>
[    0.198981] PTP clock support registered
[    0.199115] EDAC MC: Ver: 3.0.0
[    0.200207] Advanced Linux Sound Architecture Driver Initialized.
[    0.201159] clocksource: Switched to clocksource arch_sys_counter
[    0.291215] VFS: Disk quotas dquot_6.6.0
[    0.291309] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.291909] AppArmor: AppArmor Filesystem Enabled
[    0.291996] pnp: PnP ACPI: disabled
[    0.299441] NET: Registered protocol family 2
[    0.300124] tcp_listen_portaddr_hash hash table entries: 1024 (order: 2, 16384 bytes)
[    0.300218] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
[    0.300443] TCP bind hash table entries: 16384 (order: 6, 262144 bytes)
[    0.300767] TCP: Hash tables configured (established 16384 bind 16384)
[    0.300953] UDP hash table entries: 1024 (order: 3, 32768 bytes)
[    0.301046] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes)
[    0.301333] NET: Registered protocol family 1
[    0.301870] RPC: Registered named UNIX socket transport module.
[    0.301889] RPC: Registered udp transport module.
[    0.301905] RPC: Registered tcp transport module.
[    0.301919] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    0.301943] PCI: CLS 0 bytes, default 64
[    0.302156] Trying to unpack rootfs image as initramfs...
[    0.697148] Freeing initrd memory: 6732K
[    0.698033] kvm [1]: 8-bit VMID
[    0.698055] kvm [1]: IPA Size Limit: 40bits
[    0.698971] kvm [1]: vgic interrupt IRQ1
[    0.699110] kvm [1]: Hyp mode initialized successfully
[    0.706410] Initialise system trusted keyrings
[    0.706602] workingset: timestamp_bits=44 max_order=19 bucket_order=0
[    0.713296] zbud: loaded
[    0.715052] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    0.715919] NFS: Registering the id_resolver key type
[    0.715957] Key type id_resolver registered
[    0.715972] Key type id_legacy registered
[    0.715996] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
[    0.716202] 9p: Installing v9fs 9p2000 file system support
[    0.723869] Key type asymmetric registered
[    0.723905] Asymmetric key parser 'x509' registered
[    0.723984] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 244)
[    0.724153] io scheduler noop registered
[    0.724170] io scheduler deadline registered
[    0.724374] io scheduler cfq registered (default)
[    0.724393] io scheduler mq-deadline registered
[    0.724409] io scheduler kyber registered
[    0.725891] sun50i-de2-bus 1000000.de2: Error couldn't map SRAM to device
[    0.726522] sun4i-usb-phy 1c19400.phy: Couldn't request ID GPIO
[    0.732610] sun50i-a64-r-pinctrl 1f02c00.pinctrl: initialized sunXi PIO driver
[    0.736521] EINJ: ACPI disabled.
[    0.747944] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    0.750495] SuperH (H)SCI(F) driver initialized
[    0.750948] msm_serial: driver initialized
[    0.760722] brd: module loaded
[    0.769031] loop: module loaded
[    0.773280] libphy: Fixed MDIO Bus: probed
[    0.773636] tun: Universal TUN/TAP device driver, 1.6
[    0.774500] thunder_xcv, ver 1.0
[    0.774554] thunder_bgx, ver 1.0
[    0.774605] nicpf, ver 1.0
[    0.775056] hclge is initializing
[    0.775074] hns3: Hisilicon Ethernet Network Driver for Hip08 Family - version
[    0.775095] hns3: Copyright (c) 2017 Huawei Corporation.
[    0.775151] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
[    0.775168] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
[    0.775252] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.4.0-k
[    0.775271] igb: Copyright (c) 2007-2014 Intel Corporation.
[    0.775326] igbvf: Intel(R) Gigabit Virtual Function Network Driver - version 2.4.0-k
[    0.775348] igbvf: Copyright (c) 2009 - 2012 Intel Corporation.
[    0.775695] sky2: driver version 1.30
[    0.776392] VFIO - User Level meta-driver version: 0.3
[    0.777874] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    0.777918] ehci-pci: EHCI PCI platform driver
[    0.777969] ehci-platform: EHCI generic platform driver
[    0.778228] ehci-platform 1c1a000.usb: EHCI Host Controller
[    0.778268] ehci-platform 1c1a000.usb: new USB bus registered, assigned bus number 1
[    0.779205] ehci-platform 1c1a000.usb: irq 14, io mem 0x01c1a000
[    0.793167] ehci-platform 1c1a000.usb: USB 2.0 started, EHCI 1.00
[    0.793953] hub 1-0:1.0: USB hub found
[    0.793998] hub 1-0:1.0: 1 port detected
[    0.794647] ehci-orion: EHCI orion driver
[    0.794847] ehci-exynos: EHCI EXYNOS driver
[    0.794953] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    0.794987] ohci-pci: OHCI PCI platform driver
[    0.795066] ohci-platform: OHCI generic platform driver
[    0.795234] ohci-platform 1c1a400.usb: Generic Platform OHCI controller
[    0.795277] ohci-platform 1c1a400.usb: new USB bus registered, assigned bus number 2
[    0.795574] ohci-platform 1c1a400.usb: irq 15, io mem 0x01c1a400
[    0.857861] hub 2-0:1.0: USB hub found
[    0.857906] hub 2-0:1.0: 1 port detected
[    0.858481] ohci-exynos: OHCI EXYNOS driver
[    0.859016] usbcore: registered new interface driver usb-storage
[    0.861928] sun6i-rtc 1f00000.rtc: rtc core: registered rtc-sun6i as rtc0
[    0.861953] sun6i-rtc 1f00000.rtc: RTC enabled
[    0.862199] i2c /dev entries driver
[    0.866654] sdhci: Secure Digital Host Controller Interface driver
[    0.866674] sdhci: Copyright(c) Pierre Ossman
[    0.867081] Synopsys Designware Multimedia Card Interface Driver
[    0.868114] sdhci-pltfm: SDHCI platform and OF driver helper
[    0.869550] ledtrig-cpu: registered to indicate activity on CPUs
[    0.870683] usbcore: registered new interface driver usbhid
[    0.870701] usbhid: USB HID core driver
[    0.874020] NET: Registered protocol family 17
[    0.874480] 9pnet: Installing 9P2000 support
[    0.874558] Key type dns_resolver registered
[    0.875377] registered taskstats version 1
[    0.875394] Loading compiled-in X.509 certificates
[    0.875507] zswap: loaded using pool lzo/zbud
[    0.875705] AppArmor: AppArmor sha1 policy hashing enabled
[    0.888697] sunxi-rsb 1f03400.rsb: RSB running at 3000000 Hz
[    0.889212] axp20x-rsb sunxi-rsb-3a3: AXP20x variant AXP803 found
[    0.891884] dcdc1: supplied by regulator-dummy
[    0.892199] dcdc2: supplied by regulator-dummy
[    0.892440] dcdc4: supplied by regulator-dummy
[    0.892692] dcdc5: supplied by regulator-dummy
[    0.892928] dcdc6: supplied by regulator-dummy
[    0.893186] dc1sw: supplied by regulator-dummy
[    0.893434] aldo1: supplied by regulator-dummy
[    0.893541] afvcc-csi: Bringing 3300000uV into 2800000-2800000uV
[    0.893770] aldo2: supplied by regulator-dummy
[    0.893997] aldo3: supplied by regulator-dummy
[    0.894264] dldo1: supplied by regulator-dummy
[    0.894499] dldo2: supplied by regulator-dummy
[    0.894581] vcc-wifi: Bringing 2900000uV into 3300000-3300000uV
[    0.894789] dldo3: supplied by regulator-dummy
[    0.895047] dldo4: supplied by regulator-dummy
[    0.895292] eldo1: supplied by regulator-dummy
[    0.895529] eldo2: supplied by regulator-dummy
[    0.895805] eldo3: supplied by regulator-dummy
[    0.896040] fldo1: supplied by regulator-dummy
[    0.896288] fldo2: supplied by regulator-dummy
[    0.896569] rtc-ldo: supplied by regulator-dummy
[    0.896762] ldo-io0: supplied by regulator-dummy
[    0.897025] ldo-io1: supplied by regulator-dummy
[    0.897405] drivevbus: supplied by regulator-dummy
[    0.897634] axp20x-rsb sunxi-rsb-3a3: AXP20X driver loaded
[    0.898173] sun4i-usb-phy 1c19400.phy: Couldn't request ID GPIO
[    0.903889] sun50i-a64-pinctrl 1c20800.pinctrl: initialized sunXi PIO driver
[    0.905238] printk: console [ttyS0] disabled
[    0.925767] 1c28000.serial: ttyS0 at MMIO 0x1c28000 (irq = 21, base_baud = 1500000) is a U6_1655
0A
[    2.158098] printk: console [ttyS0] enabled
[    2.184439] 1c28400.serial: ttyS1 at MMIO 0x1c28400 (irq = 22, base_baud = 1500000) is a U6_1655
0A
[    2.200773] sunxi-mmc 1c0f000.mmc: Linked as a consumer to regulator.1
[    2.208113] sunxi-mmc 1c0f000.mmc: Got CD GPIO
[    2.237976] sunxi-mmc 1c0f000.mmc: initialized, max. request size: 16384 KB, uses new timings mo
de
[    2.248682] sunxi-mmc 1c10000.mmc: Linked as a consumer to regulator.11
[    2.255392] sunxi-mmc 1c10000.mmc: Linked as a consumer to regulator.13
[    2.262728] sunxi-mmc 1c10000.mmc: allocated mmc-pwrseq
[    2.291086] sunxi-mmc 1c10000.mmc: initialized, max. request size: 16384 KB, uses new timings mo
de
[    2.301892] sunxi-mmc 1c11000.mmc: Linked as a consumer to regulator.1
[    2.319267] mmc0: new high speed SDXC card at address aaaa
[    2.326240] mmcblk0: mmc0:aaaa SL64G 59.5 GiB 
[    2.335899] mmc1: queuing unknown CIS tuple 0x80 (2 bytes)
[    2.341445] sunxi-mmc 1c11000.mmc: initialized, max. request size: 2048 KB, uses new timings mod
e
[    2.350384]  mmcblk0: p1 p2
[    2.354120] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
[    2.361179] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
[    2.367872] sun4i-usb-phy 1c19400.phy: Linked as a consumer to regulator.22
[    2.376408] ehci-platform 1c1b000.usb: EHCI Host Controller
[    2.382057] ehci-platform 1c1b000.usb: new USB bus registered, assigned bus number 3
[    2.390622] ehci-platform 1c1b000.usb: irq 16, io mem 0x01c1b000
[    2.397874] mmc1: queuing unknown CIS tuple 0x80 (7 bytes)
[    2.406722] mmc1: queuing unknown CIS tuple 0x81 (9 bytes)
[    2.412250] ehci-platform 1c1b000.usb: USB 2.0 started, EHCI 1.00
[    2.419135] hub 3-0:1.0: USB hub found
[    2.422952] hub 3-0:1.0: 1 port detected
[    2.428608] ohci-platform 1c1b400.usb: Generic Platform OHCI controller
[    2.435287] ohci-platform 1c1b400.usb: new USB bus registered, assigned bus number 4
[    2.443397] ohci-platform 1c1b400.usb: irq 17, io mem 0x01c1b400
[    2.466090] random: fast init done
[    2.484085] mmc2: new DDR MMC card at address 0001
[    2.490321] mmcblk2: mmc2:0001 8WPD3R 7.28 GiB 
[    2.496096] mmcblk2boot0: mmc2:0001 8WPD3R partition 1 4.00 MiB
[    2.503241] mmcblk2boot1: mmc2:0001 8WPD3R partition 2 4.00 MiB
[    2.513956] hub 4-0:1.0: USB hub found
[    2.517762] hub 4-0:1.0: 1 port detected
[    2.523973] usb_phy_generic usb_phy_generic.0.auto: usb_phy_generic.0.auto supply vcc not found,
 using dummy regulator
[    2.534766]  mmcblk2: p1 p2
[    2.539944] usb_phy_generic usb_phy_generic.0.auto: Linked as a consumer to regulator.0
[    2.548832] musb-hdrc musb-hdrc.1.auto: MUSB HDRC host driver
[    2.554628] musb-hdrc musb-hdrc.1.auto: new USB bus registered, assigned bus number 5
[    2.563150] hub 5-0:1.0: USB hub found
[    2.566969] hub 5-0:1.0: 1 port detected
[    2.571896] sun6i-rtc 1f00000.rtc: setting system clock to 2018-12-15 20:11:45 UTC (1544904705)
[    2.581058] vcc-hdmi-dsi: disabling
[    2.584626] cpvdd: disabling
[    2.587597] ALSA device list:
[    2.590603]   No soundcards found.
[    2.604477] Freeing unused kernel memory: 7168K
[    2.613191] Run /init as init process
[    2.631061] mmc1: new high speed SDIO card at address 0001
[    2.755277] stage-1-init: loading module dm_mod...
[    2.765241] usb 3-1: new high-speed USB device number 2 using ehci-platform
[    2.797411] device-mapper: ioctl: 4.39.0-ioctl (2018-04-03) initialised: dm-devel@redhat.com
[    2.807292] stage-1-init: running udev...
[    2.838393] systemd-udevd[218]: starting version 239
[    2.934480] hub 3-1:1.0: USB hub found
[    2.938728] hub 3-1:1.0: 4 ports detected
[    3.294805] stage-1-init: starting device mapper and LVM...
[    3.306927] random: lvm: uninitialized urandom read (4 bytes read)
[    3.333197] usb 3-1.2: new high-speed USB device number 3 using ehci-platform
[    3.418869] stage-1-init: checking /dev/disk/by-label/NIXOS_SD...
[    3.422471] stage-1-init: fsck (busybox 1.29.3)
[    3.422865] stage-1-init: [fsck.ext4 (1) -- /mnt-root/] fsck.ext4 -a /dev/disk/by-label/NIXOS_SD
[    3.437606] stage-1-init: NIXOS_SD: clean, 88433/148048 files, 456124/591293 blocks
[    3.472300] stage-1-init: mounting /dev/disk/by-label/NIXOS_SD on /...
[    3.497964] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null)
[    3.554881] usb-storage 3-1.2:1.0: USB Mass Storage device detected
[    3.566826] scsi host0: usb-storage 3-1.2:1.0
[    3.749219] usb 3-1.3: new high-speed USB device number 4 using ehci-platform
[    3.968480] usb-storage 3-1.3:1.0: USB Mass Storage device detected
[    3.975195] scsi host1: usb-storage 3-1.3:1.0
[    4.251503] EXT4-fs (mmcblk0p2): re-mounted. Opts: (null)
[    4.258980] booting system configuration /nix/store/m13rq189zq5jsmyk3d5pisrzry1db2ng-nixos-syste
m-nixos-19.03.git.7b83d90
[    4.486544] stage-2-init: running activation script...
[    4.587695] scsi 0:0:0:0: Direct-Access              USB Flash Memory 1.00 PQ: 0 ANSI: 4
[    4.597125] sd 0:0:0:0: [sda] 30310400 512-byte logical blocks: (15.5 GB/14.5 GiB)
[    4.605493] sd 0:0:0:0: [sda] Write Protect is off
[    4.610320] sd 0:0:0:0: [sda] Mode Sense: 45 00 00 00
[    4.610971] sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or
 FUA
[    4.626982] sd 0:0:0:0: [sda] Attached SCSI removable disk
[    4.638929] random: perl: uninitialized urandom read (4 bytes read)
[    4.990402] scsi 1:0:0:0: Direct-Access     PNY      USB 2.0 FD       0.00 PQ: 0 ANSI: 4
[    5.000668] sd 1:0:0:0: [sdb] 7892992 512-byte logical blocks: (4.04 GB/3.76 GiB)
[    5.009247] sd 1:0:0:0: [sdb] Write Protect is off
[    5.014080] sd 1:0:0:0: [sdb] Mode Sense: 23 00 00 00
[    5.014984] sd 1:0:0:0: [sdb] Write cache: disabled, read cache: enabled, doesn't support DPO or
 FUA
[    5.043246] sd 1:0:0:0: [sdb] Attached SCSI removable disk
[    5.346979] stage-2-init: setting up /etc...
[    5.354640] random: perl: uninitialized urandom read (4 bytes read)
[    6.546716] random: mktemp: uninitialized urandom read (10 bytes read)
[    7.437059] stage-2-init: Disk /dev/mmcblk0: 59.5 GiB, 63864569856 bytes, 124735488 sectors
[    7.437410] stage-2-init: Units: sectors of 1 * 512 = 512 bytes
[    7.437704] stage-2-init: Sector size (logical/physical): 512 bytes / 512 bytes
[    7.437984] stage-2-init: I/O size (minimum/optimal): 512 bytes / 512 bytes
[    7.438193] stage-2-init: Disklabel type: dos
[    7.438417] stage-2-init: Disk identifier: 0x2178694e
[    7.438676] stage-2-init: Old situation:
[    7.439075] stage-2-init: Device         Boot  Start     End Sectors  Size Id Type
[    7.439386] stage-2-init: /dev/mmcblk0p1 *     16384  262143  245760  120M  b W95 FAT32
[    7.439688] stage-2-init: /dev/mmcblk0p2      262144 5017063 4754920  2.3G 83 Linux
[    7.439952] stage-2-init: /dev/mmcblk0p2:
[    7.440147] stage-2-init: New situation:
[    7.440354] stage-2-init: Disklabel type: dos
[    7.440582] stage-2-init: Disk identifier: 0x2178694e
[    7.440950] stage-2-init: Device         Boot  Start       End   Sectors  Size Id Type
[    7.441293] stage-2-init: /dev/mmcblk0p1 *     16384    262143    245760  120M  b W95 FAT32
[    7.441606] stage-2-init: /dev/mmcblk0p2      262144 124735487 124473344 59.4G 83 Linux
[    7.441916] stage-2-init: The partition table has been altered.
[    7.442184] stage-2-init: Calling ioctl() to re-read partition table.
[    7.442512] stage-2-init: Re-reading the partition table failed.: Device or resource busy
[    7.442975] stage-2-init: The kernel still uses the old table. The new table will be used at the
 next reboot or after you run partprobe(8) or kpartx(8).
[    7.443171] stage-2-init: Syncing disks.
[    7.813360] stage-2-init: resize2fs 1.44.4 (18-Aug-2018)
[    7.817564] EXT4-fs (mmcblk0p2): resizing filesystem from 591293 to 15559168 blocks
[    8.926827] EXT4-fs (mmcblk0p2): resized filesystem to 15559168
[    9.085721] random: crng init done
[    9.268931] stage-2-init: Filesystem at /dev/mmcblk0p2 is mounted on /; on-line resizing require
d
[    9.269295] stage-2-init: old_desc_blocks = 1, new_desc_blocks = 8
[    9.269631] stage-2-init: The filesystem on /dev/mmcblk0p2 is now 15559168 (4k) blocks long.
[   10.664548] stage-2-init: unpacking the NixOS/Nixpkgs sources...
[   10.928527] stage-2-init: created 1 symlinks in user environment
[   11.377198] NET: Registered protocol family 10
[   11.382630] Segment Routing with IPv6
[   11.418557] systemd[1]: systemd 239 running in system mode. (+PAM +AUDIT -SELINUX +IMA +APPARMOR
 +SMACK -SYSVINIT +UTMP -LIBCRYPTSETUP +GCRYPT -GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID -ELFUTILS +KMO
D +IDN2 -IDN +PCRE2 default-hierarchy=hybrid)
[   11.440331] systemd[1]: Detected architecture arm64.
[   11.454590] systemd[1]: Set hostname to <nixos>.
[   11.459507] systemd[1]: Initializing machine ID from random generator.
[   11.968552] systemd[1]: Listening on Journal Socket.
[   11.975055] systemd[1]: Listening on Journal Audit Socket.
[   11.981105] systemd[1]: Listening on initctl Compatibility Named Pipe.
[   11.987889] systemd[1]: Reached target Containers.
[   11.999913] systemd[1]: Starting Load Kernel Modules...
[   12.007190] systemd[1]: Created slice system-systemd\x2dfsck.slice.
[   12.150008] audit: type=1130 audit(1544904715.076:2): pid=1 uid=0 auid=4294967295 ses=4294967295
 subj==unconfined msg='unit=systemd-sysctl comm="systemd" exe="/nix/store/2b6h8wx1c2svnphh39j4ypw4c
agcwqvz-systemd-239/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   12.191937] EXT4-fs (mmcblk0p2): re-mounted. Opts: (null)
[   12.209908] audit: type=1130 audit(1544904715.136:3): pid=1 uid=0 auid=4294967295 ses=4294967295
 subj==unconfined msg='unit=systemd-remount-fs comm="systemd" exe="/nix/store/2b6h8wx1c2svnphh39j4y
pw4cagcwqvz-systemd-239/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   12.235929] audit: type=1130 audit(1544904715.160:4): pid=1 uid=0 auid=4294967295 ses=4294967295
 subj==unconfined msg='unit=systemd-tmpfiles-setup-dev comm="systemd" exe="/nix/store/2b6h8wx1c2svn
phh39j4ypw4cagcwqvz-systemd-239/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   12.281302] audit: type=1130 audit(1544904715.200:5): pid=1 uid=0 auid=4294967295 ses=4294967295
 subj==unconfined msg='unit=systemd-journald comm="systemd" exe="/nix/store/2b6h8wx1c2svnphh39j4ypw
4cagcwqvz-systemd-239/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   12.318266] audit: type=1127 audit(1544904715.240:6): pid=573 uid=0 auid=4294967295 ses=42949672
95 subj==unconfined msg=' comm="systemd-update-utmp" exe="/nix/store/2b6h8wx1c2svnphh39j4ypw4cagcwq
vz-systemd-239/lib/systemd/systemd-update-utmp" hostname=? addr=? terminal=? res=success'
[   12.344259] audit: type=1325 audit(1544904715.224:7): table=filter family=2 entries=0
[   12.352819] audit: type=1300 audit(1544904715.224:7): arch=c00000b7 syscall=105 success=yes exit
=0 a0=75b4a10 a1=1e98 a2=41c190 a3=0 items=0 ppid=50 pid=572 auid=4294967295 uid=0 gid=0 euid=0 sui
d=0 fsuid=0 egid=0 sgid=0 fsgid=0 tty=(none) ses=4294967295 comm="modprobe" exe="/nix/store/7jqi626
qpzd238gm5fn8jn057zzsl379-kmod-25/bin/kmod" subj==unconfined key=(null)
[   12.385287] audit: type=1327 audit(1544904715.224:7): proctitle=2F6E69782F73746F72652F376A716936
323671707A64323338676D35666E386A6E3035377A7A736C3337392D6B6D6F642D32352F62696E2F6D6F6470726F6265002
D71002D2D0069707461626C655F66696C746572
[   12.407389] audit: type=1130 audit(1544904715.332:8): pid=1 uid=0 auid=4294967295 ses=4294967295
 subj==unconfined msg='unit=systemd-random-seed comm="systemd" exe="/nix/store/2b6h8wx1c2svnphh39j4
ypw4cagcwqvz-systemd-239/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   12.433825] systemd-journald[557]: Received request to flush runtime journal from PID 1
[   12.436635] audit: type=1325 audit(1544904715.332:9): table=filter family=10 entries=0
[   13.563001] usbcore: registered new interface driver uas
[   13.936232] sunxi-wdt 1c20ca0.watchdog: Watchdog enabled (timeout=16 sec, nowayout=0)
[   14.054732] input: axp20x-pek as /devices/platform/soc/1f03400.rsb/sunxi-rsb-3a3/axp221-pek/inpu
t/input0
[   14.097480] sun4i-drm display-engine: bound 1100000.mixer (ops sun8i_mixer_ops [sun8i_mixer])
[   14.133127] dwmac-sun8i 1c30000.ethernet: PTP uses main clock
[   14.139179] dwmac-sun8i 1c30000.ethernet: Linked as a consumer to regulator.6
[   14.169526] sun4i-drm display-engine: bound 1200000.mixer (ops sun8i_mixer_ops [sun8i_mixer])
[   14.189765] dwmac-sun8i 1c30000.ethernet: Current syscon value is not the default 6 (expect 0)
[   14.200792] sun4i-drm display-engine: No panel or bridge found... RGB output disabled
[   14.206582] dwmac-sun8i 1c30000.ethernet: No HW DMA feature register supported
[   14.211441] sun4i-drm display-engine: bound 1c0c000.lcd-controller (ops sun4i_tcon_ops [sun4i_tc
on])
[   14.226926] dwmac-sun8i 1c30000.ethernet: RX Checksum Offload Engine supported
[   14.227284] sun4i-drm display-engine: bound 1c0d000.lcd-controller (ops sun4i_tcon_ops [sun4i_tc
on])
[   14.245855] sun8i-dw-hdmi 1ee0000.hdmi: Linked as a consumer to regulator.10
[   14.255071] dwmac-sun8i 1c30000.ethernet: COE Type 2
[   14.265460] sun8i-dw-hdmi 1ee0000.hdmi: Detected HDMI TX controller v1.32a with HDCP (sun8i_dw_h
dmi_phy)
[   14.266067] dwmac-sun8i 1c30000.ethernet: TX Checksum insertion supported
[   14.285685] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[   14.298794] dwmac-sun8i 1c30000.ethernet: Normal descriptors
[   14.313703] dwmac-sun8i 1c30000.ethernet: Chain mode enabled
[   14.317443] sun8i-dw-hdmi 1ee0000.hdmi: registered DesignWare HDMI I2C bus driver
[   14.319767] libphy: stmmac: probed
[   14.349729] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[   14.350988] sun4i-drm display-engine: bound 1ee0000.hdmi (ops sun8i_dw_hdmi_ops [sun8i_drm_hdmi]
)
[   14.359148] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2
[   14.365311] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[   14.378400] cfg80211: failed to load regulatory.db
[   14.384117] [drm] No driver support for vblank timestamp query.
[   14.392630] [drm] Cannot find any crtc or sizes
[   14.398743] [drm] Initialized sun4i-drm 1.0.0 20150629 for display-engine on minor 0
[   14.548688] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43430-sdio for chip BCM43430/1
[   14.561478] usbcore: registered new interface driver brcmfmac
[   15.421408] [drm] Cannot find any crtc or sizes
[   15.457249] 8021q: 802.1Q VLAN Support v1.8
[   15.629242] brcmfmac: brcmf_sdio_htclk: HT Avail timeout (1000000): clkctl 0x50
[   15.646673] RTL8211E Gigabit Ethernet stmmac-0:01: attached PHY driver [RTL8211E Gigabit Etherne
t] (mii_bus:phy_addr=stmmac-0:01, irq=POLL)
[   15.661914] dwmac-sun8i 1c30000.ethernet eth0: No Safety Features support found
[   15.669346] dwmac-sun8i 1c30000.ethernet eth0: No MAC Management Counters available
[   15.669355] dwmac-sun8i 1c30000.ethernet eth0: PTP not supported by HW
[   15.669813] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[   16.649477] brcmfmac: brcmf_sdio_htclk: HT Avail timeout (1000000): clkctl 0x50
[   35.134013] dwmac-sun8i 1c30000.ethernet eth0: Link is Up - 1Gbps/Full - flow control rx/tx
[   35.142463] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[   59.291639] Console: switching to colour frame buffer device 240x67
[   59.350442] sun4i-drm display-engine: fb0: DRM emulated frame buffer device
[  120.926092] usb 3-1.2: USB disconnect, device number 3
[  123.486089] usb 3-1.3: USB disconnect, device number 4
[  126.639537] usb 3-1.3: new full-speed USB device number 5 using ehci-platform
[  126.883160] input: Arcox Technology Co., LTD AmazonBasics gaming keyboard Keyboard as /devices/p
latform/soc/1c1b000.usb/usb3/3-1/3-1.3/3-1.3:1.0/0003:3938:1119.0001/input/input1
[  126.960492] input: Arcox Technology Co., LTD AmazonBasics gaming keyboard Consumer Control as /d
evices/platform/soc/1c1b000.usb/usb3/3-1/3-1.3/3-1.3:1.0/0003:3938:1119.0001/input/input2
[  126.977890] input: Arcox Technology Co., LTD AmazonBasics gaming keyboard System Control as /dev
ices/platform/soc/1c1b000.usb/usb3/3-1/3-1.3/3-1.3:1.0/0003:3938:1119.0001/input/input3
[  126.995022] input: Arcox Technology Co., LTD AmazonBasics gaming keyboard as /devices/platform/s
oc/1c1b000.usb/usb3/3-1/3-1.3/3-1.3:1.0/0003:3938:1119.0001/input/input4
[  127.010863] input: Arcox Technology Co., LTD AmazonBasics gaming keyboard as /devices/platform/s
oc/1c1b000.usb/usb3/3-1/3-1.3/3-1.3:1.0/0003:3938:1119.0001/input/input5
[  127.026795] input: Arcox Technology Co., LTD AmazonBasics gaming keyboard Mouse as /devices/plat
form/soc/1c1b000.usb/usb3/3-1/3-1.3/3-1.3:1.0/0003:3938:1119.0001/input/input6
[  127.043026] hid-generic 0003:3938:1119.0001: input: USB HID v1.11 Keyboard [Arcox Technology Co.
, LTD AmazonBasics gaming keyboard] on usb-1c1b000.usb-1.3/input0
[  127.139175] mousedev: PS/2 mouse device common for all mice
[  272.884613] usb 3-1.3: USB disconnect, device number 5