Hubble Motorola Focus 66-W Camera "CameraHD" setup

motorola_camera_setup.md

Use the Hubble app to get the camera connected to a wifi network.

Find the Camera's IP address:

> sudo arp-scan --interface=enp3s0 --localnet
Interface: enp3s0, datalink type: EN10MB (Ethernet)
Starting arp-scan 1.8.1 with 256 hosts (http://www.nta-monitor.com/tools/arp-scan/)
192.168.1.100	00:19:99:0f:6a:98	Fujitsu Technology Solutions
192.168.1.102	c4:6e:1f:53:f0:8b	(Unknown)
192.168.1.111	00:04:ed:01:72:da	Billion Electric Co., Ltd.
192.168.1.158	7c:2f:80:49:a4:de	Gigaset Communications GmbH
192.168.1.174	c8:1f:66:4b:f5:7f	(Unknown)
192.168.1.150	64:bc:0c:48:79:9d	(Unknown)
192.168.1.188	b8:27:eb:e4:1b:51	(Unknown)
192.168.1.214	38:2c:4a:bb:f9:9e	(Unknown)
192.168.1.234	c8:1f:66:b0:19:9a	(Unknown)
192.168.1.210	00:0a:e2:13:8b:e0	Binatone Electronics International, Ltd < this is the camera
192.168.1.253	7c:2f:80:7b:5b:61	Gigaset Communications GmbH
192.168.1.245	c8:bc:c8:e9:25:27	Apple
192.168.1.166	2c:f0:a2:7a:2a:c8	(Unknown)

Connect to the camera with VLC:

vlc rtsp://user:pass@192.168.1.210:6667/blinkhd

Using ip address from above

---

Urls:

• http://192.168.1.210:8080/fwupgrade.html
• http://192.168.1.210:8080/cgi-bin/logdownload.cgi
• http://192.168.1.210:8080/cgi-bin/haserlupgrade.cgi
• http://192.168.1.210:8080/cgi-bin/fullupgrade
• http://192.168.1.210:8080/test.html
• http://192.168.1.210/test.html

To issue commands quotes matter!:

curl "http://192.168.1.210/?action=command&command=plus_brightness"

links:

• https://github.com/Erliz/hubble-sniffer
• http://www.contextis.com/resources/blog/push-hack-reverse-engineering-ip-camera/
• https://www.ispyconnect.com/man.aspx?n=motorola - no use

Why the sudden increase in interest in this?

@samuelcolvin
Sorry, I couldn't find anywhere a solution to it so I posted a message about it not working, and I guess some people wondered the same thing while searching online.

I became a parent and we bought a Motorola monitor, and the Hubble app is still garbage 🤷‍♂️.
It's tolerable, but there's so much nonsense and poor UX with it that I'd prefer to make a minimalist one myself, basically just the video stream.
Controls for movement would be nice too but optional.

@rkdavidson
I bought a Foscam camera (FI9821P) that is configured for LAN/VPN-only access (considering their poor security track record). At least those have an RTSP stream available and the image quality is actually quite good even in night-mode.

Sucks that Hubble requires an Internet middle-man to work.

Any workarounds found? Is there anyway to get this to work via Tinycam Monitor and serve it that way?

Figuring out a way beyond the internet middleman services Hubble requires is beyond my skills :(.

I think a known route would be revert your camera's firmware to factory (or near it), to go back to the fairly insecure (i.e. open) setup outlined in this gist.