Navigation Menu

Skip to content

Instantly share code, notes, and snippets.

@samuelsadok

samuelsadok/dmesg

Created January 2, 2018 06:49
Show Gist options
  • Star 3 You must be signed in to star a gist
  • Fork 0 You must be signed in to fork a gist
  • Save samuelsadok/6d7b3e3015d3370a92ed4702e4d3c4b5 to your computer and use it in GitHub Desktop.
Save samuelsadok/6d7b3e3015d3370a92ed4702e4d3c4b5 to your computer and use it in GitHub Desktop.
Download ZIP
linux-usb: [BUG] SD card reader disappears after suspend
Raw
dmesg
[ 0.000000] microcode: microcode updated early to revision 0x17, date = 2017-01-27
[ 0.000000] Linux version 4.14.8-1-ARCH (builduser@heftig-11417) (gcc version 7.2.1 20171128 (GCC)) #1 SMP PREEMPT Wed Dec 20 21:27:44 UTC 2017
[ 0.000000] Command line: initrd=\intel-ucode.img initrd=\initramfs-linux.img root=/dev/mapper/MainVolGroup-root rw resume=/dev/mapper/MainVolGroup-swap quiet modprobe.blacklist=i915 intel_iommu=on systemd.unit=multi-user.target
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
[ 0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x0000000000057fff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000000058000-0x0000000000058fff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000059000-0x000000000008efff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000008f000-0x000000000008ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000090000-0x000000000009ffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000000a0000-0x00000000000bffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000007ad13fff] usable
[ 0.000000] BIOS-e820: [mem 0x000000007ad14000-0x000000007ad52fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x000000007ad53000-0x000000007ad5efff] usable
[ 0.000000] BIOS-e820: [mem 0x000000007ad5f000-0x000000007ad8efff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x000000007ad8f000-0x000000007ae38fff] usable
[ 0.000000] BIOS-e820: [mem 0x000000007ae39000-0x000000007ae8efff] reserved
[ 0.000000] BIOS-e820: [mem 0x000000007ae8f000-0x000000007aecffff] usable
[ 0.000000] BIOS-e820: [mem 0x000000007aed0000-0x000000007aefefff] reserved
[ 0.000000] BIOS-e820: [mem 0x000000007aeff000-0x000000007af79fff] usable
[ 0.000000] BIOS-e820: [mem 0x000000007af7a000-0x000000007afe4fff] reserved
[ 0.000000] BIOS-e820: [mem 0x000000007afe5000-0x000000007affffff] usable
[ 0.000000] BIOS-e820: [mem 0x000000007b000000-0x000000007f9fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000e00f8000-0x00000000e00f8fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ffe10000-0x00000000ffe3ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000047f5fffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] e820: update [mem 0x6e4bb190-0x6e4d17cf] usable ==> usable
[ 0.000000] e820: update [mem 0x6e4bb190-0x6e4d17cf] usable ==> usable
[ 0.000000] e820: update [mem 0x6e4b9190-0x6e4ba0fe] usable ==> usable
[ 0.000000] e820: update [mem 0x6e4b9190-0x6e4ba0fe] usable ==> usable
[ 0.000000] extended physical RAM map:
[ 0.000000] reserve setup_data: [mem 0x0000000000000000-0x0000000000057fff] usable
[ 0.000000] reserve setup_data: [mem 0x0000000000058000-0x0000000000058fff] reserved
[ 0.000000] reserve setup_data: [mem 0x0000000000059000-0x000000000008efff] usable
[ 0.000000] reserve setup_data: [mem 0x000000000008f000-0x000000000008ffff] reserved
[ 0.000000] reserve setup_data: [mem 0x0000000000090000-0x000000000009ffff] usable
[ 0.000000] reserve setup_data: [mem 0x00000000000a0000-0x00000000000bffff] reserved
[ 0.000000] reserve setup_data: [mem 0x0000000000100000-0x000000006e4b918f] usable
[ 0.000000] reserve setup_data: [mem 0x000000006e4b9190-0x000000006e4ba0fe] usable
[ 0.000000] reserve setup_data: [mem 0x000000006e4ba0ff-0x000000006e4bb18f] usable
[ 0.000000] reserve setup_data: [mem 0x000000006e4bb190-0x000000006e4d17cf] usable
[ 0.000000] reserve setup_data: [mem 0x000000006e4d17d0-0x000000007ad13fff] usable
[ 0.000000] reserve setup_data: [mem 0x000000007ad14000-0x000000007ad52fff] ACPI NVS
[ 0.000000] reserve setup_data: [mem 0x000000007ad53000-0x000000007ad5efff] usable
[ 0.000000] reserve setup_data: [mem 0x000000007ad5f000-0x000000007ad8efff] ACPI data
[ 0.000000] reserve setup_data: [mem 0x000000007ad8f000-0x000000007ae38fff] usable
[ 0.000000] reserve setup_data: [mem 0x000000007ae39000-0x000000007ae8efff] reserved
[ 0.000000] reserve setup_data: [mem 0x000000007ae8f000-0x000000007aecffff] usable
[ 0.000000] reserve setup_data: [mem 0x000000007aed0000-0x000000007aefefff] reserved
[ 0.000000] reserve setup_data: [mem 0x000000007aeff000-0x000000007af79fff] usable
[ 0.000000] reserve setup_data: [mem 0x000000007af7a000-0x000000007afe4fff] reserved
[ 0.000000] reserve setup_data: [mem 0x000000007afe5000-0x000000007affffff] usable
[ 0.000000] reserve setup_data: [mem 0x000000007b000000-0x000000007f9fffff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000e00f8000-0x00000000e00f8fff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000ffe10000-0x00000000ffe3ffff] reserved
[ 0.000000] reserve setup_data: [mem 0x0000000100000000-0x000000047f5fffff] usable
[ 0.000000] efi: EFI v1.10 by Apple
[ 0.000000] efi: ACPI=0x7ad8e000 ACPI 2.0=0x7ad8e014 SMBIOS=0x7ad15000
[ 0.000000] random: fast init done
[ 0.000000] SMBIOS 2.4 present.
[ 0.000000] DMI: Apple Inc. MacBookPro11,3/Mac-2BD1B31983FE1663, BIOS MBP112.88Z.0138.B40.1706201157 06/20/2017
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] e820: last_pfn = 0x47f600 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: write-back
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-DFFFF write-protect
[ 0.000000] E0000-FFFFF uncachable
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 0080000000 mask 7F80000000 uncachable
[ 0.000000] 1 base 007C000000 mask 7FFC000000 uncachable
[ 0.000000] 2 base 007B800000 mask 7FFF800000 uncachable
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] 8 disabled
[ 0.000000] 9 disabled
[ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT
[ 0.000000] e820: last_pfn = 0x7b000 max_arch_pfn = 0x400000000
[ 0.000000] Scanning 1 areas for low memory corruption
[ 0.000000] Base memory trampoline at [ffff885680099000] 99000 size 24576
[ 0.000000] Using GB pages for direct mapping
[ 0.000000] BRK [0x2ce213000, 0x2ce213fff] PGTABLE
[ 0.000000] BRK [0x2ce214000, 0x2ce214fff] PGTABLE
[ 0.000000] BRK [0x2ce215000, 0x2ce215fff] PGTABLE
[ 0.000000] BRK [0x2ce216000, 0x2ce216fff] PGTABLE
[ 0.000000] BRK [0x2ce217000, 0x2ce217fff] PGTABLE
[ 0.000000] BRK [0x2ce218000, 0x2ce218fff] PGTABLE
[ 0.000000] BRK [0x2ce219000, 0x2ce219fff] PGTABLE
[ 0.000000] BRK [0x2ce21a000, 0x2ce21afff] PGTABLE
[ 0.000000] Secure boot disabled
[ 0.000000] RAMDISK: [mem 0x6b24f000-0x6ca42fff]
[ 0.000000] ACPI: Early table checksum verification disabled
[ 0.000000] ACPI: RSDP 0x000000007AD8E014 000024 (v02 APPLE )
[ 0.000000] ACPI: XSDT 0x000000007AD8E1C0 00009C (v01 APPLE Apple00 00000000 01000013)
[ 0.000000] ACPI: FACP 0x000000007AD8C000 0000F4 (v05 APPLE Apple00 00000000 Loki 0000005F)
[ 0.000000] ACPI BIOS Warning (bug): 32/64X length mismatch in FADT/Gpe0Block: 128/0 (20170728/tbfadt-603)
[ 0.000000] ACPI: DSDT 0x000000007AD80000 006C1F (v03 APPLE MacBookP 00110002 INTL 20100915)
[ 0.000000] ACPI: FACS 0x000000007AD1C000 000040
[ 0.000000] ACPI: FACS 0x000000007AD1C000 000040
[ 0.000000] ACPI: HPET 0x000000007AD8B000 000038 (v01 APPLE Apple00 00000001 Loki 0000005F)
[ 0.000000] ACPI: APIC 0x000000007AD8A000 0000BC (v02 APPLE Apple00 00000001 Loki 0000005F)
[ 0.000000] ACPI: SBST 0x000000007AD88000 000030 (v01 APPLE Apple00 00000001 Loki 0000005F)
[ 0.000000] ACPI: ECDT 0x000000007AD87000 000053 (v01 APPLE Apple00 00000001 Loki 0000005F)
[ 0.000000] ACPI: SSDT 0x000000007AD7F000 00010B (v01 APPLE SataAhci 00001000 INTL 20100915)
[ 0.000000] ACPI: SSDT 0x000000007AD7E000 000024 (v01 APPLE SmcDppt 00001000 INTL 20100915)
[ 0.000000] ACPI: SSDT 0x000000007AD7C000 000688 (v01 APPLE SDUsbLpt 00001000 INTL 20100915)
[ 0.000000] ACPI: SSDT 0x000000007AD79000 000032 (v01 APPLE SsdtS3 00001000 INTL 20100915)
[ 0.000000] ACPI: SSDT 0x000000007AD64000 009E2C (v01 APPLE TbtPEG11 00001000 INTL 20100915)
[ 0.000000] ACPI: SSDT 0x000000007AD63000 0000B8 (v01 APPLE Sdxc 00001000 INTL 20100915)
[ 0.000000] ACPI: SSDT 0x000000007AD61000 0006DE (v01 PmRef Cpu0Ist 00003000 INTL 20100915)
[ 0.000000] ACPI: SSDT 0x000000007AD60000 000B83 (v01 PmRef CpuPm 00003000 INTL 20100915)
[ 0.000000] ACPI: DMAR 0x000000007AD5F000 000088 (v01 APPLE HSW 00000001 AAPL 00000001)
[ 0.000000] ACPI: MCFG 0x000000007AD89000 00003C (v01 APPLE Apple00 00000001 Loki 0000005F)
[ 0.000000] ACPI: DMI detected to setup _OSI("Darwin"): Apple hardware
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000047f5fffff]
[ 0.000000] NODE_DATA(0) allocated [mem 0x47f5fc000-0x47f5fffff]
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.000000] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
[ 0.000000] Normal [mem 0x0000000100000000-0x000000047f5fffff]
[ 0.000000] Device empty
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000001000-0x0000000000057fff]
[ 0.000000] node 0: [mem 0x0000000000059000-0x000000000008efff]
[ 0.000000] node 0: [mem 0x0000000000090000-0x000000000009ffff]
[ 0.000000] node 0: [mem 0x0000000000100000-0x000000007ad13fff]
[ 0.000000] node 0: [mem 0x000000007ad53000-0x000000007ad5efff]
[ 0.000000] node 0: [mem 0x000000007ad8f000-0x000000007ae38fff]
[ 0.000000] node 0: [mem 0x000000007ae8f000-0x000000007aecffff]
[ 0.000000] node 0: [mem 0x000000007aeff000-0x000000007af79fff]
[ 0.000000] node 0: [mem 0x000000007afe5000-0x000000007affffff]
[ 0.000000] node 0: [mem 0x0000000100000000-0x000000047f5fffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000047f5fffff]
[ 0.000000] On node 0 totalpages: 4170814
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 22 pages reserved
[ 0.000000] DMA zone: 3997 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 7803 pages used for memmap
[ 0.000000] DMA32 zone: 499361 pages, LIFO batch:31
[ 0.000000] Normal zone: 57304 pages used for memmap
[ 0.000000] Normal zone: 3667456 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x08] high edge lint[0x1])
[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] smpboot: Allowing 8 CPUs, 0 hotplug CPUs
[ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x00058000-0x00058fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0008f000-0x0008ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000bffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000c0000-0x000fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x6e4b9000-0x6e4b9fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x6e4ba000-0x6e4bafff]
[ 0.000000] PM: Registered nosave memory: [mem 0x6e4bb000-0x6e4bbfff]
[ 0.000000] PM: Registered nosave memory: [mem 0x6e4d1000-0x6e4d1fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x7ad14000-0x7ad52fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x7ad5f000-0x7ad8efff]
[ 0.000000] PM: Registered nosave memory: [mem 0x7ae39000-0x7ae8efff]
[ 0.000000] PM: Registered nosave memory: [mem 0x7aed0000-0x7aefefff]
[ 0.000000] PM: Registered nosave memory: [mem 0x7af7a000-0x7afe4fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x7b000000-0x7f9fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x7fa00000-0xe00f7fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xe00f8000-0xe00f8fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xe00f9000-0xfed1bfff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xffe0ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xffe10000-0xffe3ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xffe40000-0xffffffff]
[ 0.000000] e820: [mem 0x7fa00000-0xe00f7fff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370452778343963 ns
[ 0.000000] setup_percpu: NR_CPUS:128 nr_cpumask_bits:128 nr_cpu_ids:8 nr_node_ids:1
[ 0.000000] percpu: Embedded 36 pages/cpu @ffff885aff200000 s107032 r8192 d32232 u262144
[ 0.000000] pcpu-alloc: s107032 r8192 d32232 u262144 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7
[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 4105621
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: initrd=\intel-ucode.img initrd=\initramfs-linux.img root=/dev/mapper/MainVolGroup-root rw resume=/dev/mapper/MainVolGroup-swap quiet modprobe.blacklist=i915 intel_iommu=on systemd.unit=multi-user.target
[ 0.000000] DMAR: IOMMU enabled
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 16105668K/16683256K available (6642K kernel code, 1150K rwdata, 2788K rodata, 1312K init, 1008K bss, 577588K reserved, 0K cma-reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[ 0.000000] ftrace: allocating 29077 entries in 114 pages
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] RCU restricting CPUs from NR_CPUS=128 to nr_cpu_ids=8.
[ 0.000000] Tasks RCU enabled.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8
[ 0.000000] NR_IRQS: 8448, nr_irqs: 488, preallocated irqs: 16
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
[ 0.000000] hpet clockevent registered
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.003333] tsc: Detected 2294.899 MHz processor
[ 0.003333] Calibrating delay loop (skipped), value calculated using timer frequency.. 4591.03 BogoMIPS (lpj=7649663)
[ 0.003333] pid_max: default: 32768 minimum: 301
[ 0.003333] ACPI: Core revision 20170728
[ 0.016098] ACPI: 9 ACPI AML tables successfully acquired and loaded
[ 0.022513] Security Framework initialized
[ 0.022513] Yama: becoming mindful.
[ 0.024412] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
[ 0.025290] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[ 0.025322] Mount-cache hash table entries: 32768 (order: 6, 262144 bytes)
[ 0.025349] Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes)
[ 0.025491] CPU: Physical Processor ID: 0
[ 0.025491] CPU: Processor Core ID: 0
[ 0.025494] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[ 0.025494] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[ 0.025497] mce: CPU supports 10 MCE banks
[ 0.025504] CPU0: Thermal monitoring enabled (TM1)
[ 0.025516] process: using mwait in idle threads
[ 0.025518] Last level iTLB entries: 4KB 1024, 2MB 1024, 4MB 1024
[ 0.025519] Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 1024, 1GB 4
[ 0.025706] Freeing SMP alternatives memory: 24K
[ 0.029753] smpboot: Max logical packages: 2
[ 0.029755] DMAR: Host address width 39
[ 0.029756] DMAR: DRHD base: 0x000000fed90000 flags: 0x0
[ 0.029762] DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap c0000020660462 ecap f0101a
[ 0.029762] DMAR: DRHD base: 0x000000fed91000 flags: 0x1
[ 0.029765] DMAR: dmar1: reg_base_addr fed91000 ver 1:0 cap d2008020660462 ecap f010da
[ 0.029765] DMAR: RMRR base: 0x0000007b800000 end: 0x0000007f9fffff
[ 0.029767] DMAR-IR: IOAPIC id 2 under DRHD base 0xfed91000 IOMMU 1
[ 0.029767] DMAR-IR: HPET id 0 under DRHD base 0xfed91000
[ 0.029768] DMAR-IR: Queued invalidation will be enabled to support x2apic and Intr-remapping.
[ 0.030035] DMAR-IR: Enabled IRQ remapping in x2apic mode
[ 0.030036] x2apic enabled
[ 0.030040] Switched APIC routing to cluster x2apic.
[ 0.030443] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.063459] TSC deadline timer enabled
[ 0.063461] smpboot: CPU0: Intel(R) Core(TM) i7-4850HQ CPU @ 2.30GHz (family: 0x6, model: 0x46, stepping: 0x1)
[ 0.076686] Performance Events: PEBS fmt2+, Haswell events, 16-deep LBR, full-width counters, Intel PMU driver.
[ 0.076712] ... version: 3
[ 0.076712] ... bit width: 48
[ 0.076712] ... generic registers: 4
[ 0.076713] ... value mask: 0000ffffffffffff
[ 0.076713] ... max period: 00007fffffffffff
[ 0.076713] ... fixed-purpose events: 3
[ 0.076714] ... event mask: 000000070000000f
[ 0.083349] Hierarchical SRCU implementation.
[ 0.096755] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
[ 0.103348] smp: Bringing up secondary CPUs ...
[ 0.130022] x86: Booting SMP configuration:
[ 0.130023] .... node #0, CPUs: #1 #2 #3 #4 #5 #6 #7
[ 0.315660] smp: Brought up 1 node, 8 CPUs
[ 0.315660] smpboot: Total of 8 processors activated (36733.31 BogoMIPS)
[ 0.317014] devtmpfs: initialized
[ 0.317014] x86/mm: Memory block size: 128MB
[ 0.317458] PM: Registering ACPI NVS region [mem 0x7ad14000-0x7ad52fff] (258048 bytes)
[ 0.317458] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370867519511994 ns
[ 0.317458] futex hash table entries: 2048 (order: 5, 131072 bytes)
[ 0.317458] pinctrl core: initialized pinctrl subsystem
[ 0.317458] RTC time: 23:29:29, date: 12/28/17
[ 0.317458] NET: Registered protocol family 16
[ 0.317458] cpuidle: using governor ladder
[ 0.317458] cpuidle: using governor menu
[ 0.317458] ACPI: bus type PCI registered
[ 0.317458] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.317458] PCI: MMCONFIG for domain 0000 [bus 00-9c] at [mem 0xe0000000-0xe9cfffff] (base 0xe0000000)
[ 0.317458] PCI: not using MMCONFIG
[ 0.317458] PCI: Using configuration type 1 for base access
[ 0.317458] core: PMU erratum BJ122, BV98, HSD29 worked around, HT is on
[ 0.317458] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
[ 0.317458] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[ 0.317458] ACPI: Disabled all _OSI OS vendors
[ 0.317458] ACPI: Added _OSI(Module Device)
[ 0.317458] ACPI: Added _OSI(Processor Device)
[ 0.317458] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.317458] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.317458] ACPI: Added _OSI(Darwin)
[ 0.317458] ACPI: EC: EC started
[ 0.317458] ACPI: EC: interrupt blocked
[ 0.321387] ACPI: \: Used as first EC
[ 0.321388] ACPI: \: GPE=0x17, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[ 0.321389] ACPI: \: Used as boot ECDT EC to handle transactions
[ 0.325124] ACPI: BIOS _OSI(Darwin) query honored via DMI
[ 0.328539] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
[ 0.328610] ACPI Error: Needed type [Reference], found [Integer] ffff885aec7c2a20 (20170728/exresop-103)
[ 0.328617] ACPI Exception: AE_AML_OPERAND_TYPE, While resolving operands for [OpcodeName unavailable] (20170728/dswexec-461)
[ 0.328621] ACPI Error: Method parse/execution failed \_PR.CPU0._PDC, AE_AML_OPERAND_TYPE (20170728/psparse-550)
[ 0.330110] ACPI: Dynamic OEM Table Load:
[ 0.330117] ACPI: SSDT 0xFFFF885AEC517000 00067C (v01 PmRef ApIst 00003000 INTL 20100915)
[ 0.330420] ACPI: Dynamic OEM Table Load:
[ 0.330420] ACPI: SSDT 0xFFFF885AEC011000 000119 (v01 PmRef ApCst 00003000 INTL 20100915)
[ 0.331086] ACPI: Interpreter enabled
[ 0.331105] ACPI: (supports S0 S3 S4 S5)
[ 0.331106] ACPI: Using IOAPIC for interrupt routing
[ 0.331128] PCI: MMCONFIG for domain 0000 [bus 00-9c] at [mem 0xe0000000-0xe9cfffff] (base 0xe0000000)
[ 0.331261] PCI: MMCONFIG at [mem 0xe0000000-0xe9cfffff] reserved in ACPI motherboard resources
[ 0.331261] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.331261] ACPI: Enabled 5 GPEs in block 00 to 3F
[ 0.339192] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.339195] acpi PNP0A08:00: _OSC: OS assumes control of [PCIeHotplug SHPCHotplug AER PCIeCapability]
[ 0.339202] acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-9c] only partially covers this bridge
[ 0.339357] PCI host bridge to bus 0000:00
[ 0.339359] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
[ 0.339360] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
[ 0.339361] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[ 0.339361] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000c3fff window]
[ 0.339362] pci_bus 0000:00: root bus resource [mem 0x000c4000-0x000c7fff window]
[ 0.339362] pci_bus 0000:00: root bus resource [mem 0x000c8000-0x000cbfff window]
[ 0.339363] pci_bus 0000:00: root bus resource [mem 0x000cc000-0x000cffff window]
[ 0.339364] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff window]
[ 0.339364] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window]
[ 0.339365] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window]
[ 0.339366] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window]
[ 0.339366] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff window]
[ 0.339367] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff window]
[ 0.339367] pci_bus 0000:00: root bus resource [mem 0x000e8000-0x000ebfff window]
[ 0.339368] pci_bus 0000:00: root bus resource [mem 0x000ec000-0x000effff window]
[ 0.339369] pci_bus 0000:00: root bus resource [mem 0x000f0000-0x000fffff window]
[ 0.339369] pci_bus 0000:00: root bus resource [mem 0x7fa00000-0xfeafffff window]
[ 0.339370] pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed44fff window]
[ 0.339371] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.339376] pci 0000:00:00.0: [8086:0d04] type 00 class 0x060000
[ 0.339433] pci 0000:00:01.0: [8086:0d01] type 01 class 0x060400
[ 0.339459] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[ 0.339497] pci 0000:00:01.1: [8086:0d05] type 01 class 0x060400
[ 0.339520] pci 0000:00:01.1: PME# supported from D0 D3hot D3cold
[ 0.339581] pci 0000:00:14.0: [8086:8c31] type 00 class 0x0c0330
[ 0.339599] pci 0000:00:14.0: reg 0x10: [mem 0xc1e00000-0xc1e0ffff 64bit]
[ 0.339647] pci 0000:00:14.0: PME# supported from D3hot D3cold
[ 0.339714] pci 0000:00:16.0: [8086:8c3a] type 00 class 0x078000
[ 0.339731] pci 0000:00:16.0: reg 0x10: [mem 0xc1e19100-0xc1e1910f 64bit]
[ 0.339781] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[ 0.339827] pci 0000:00:1b.0: [8086:8c20] type 00 class 0x040300
[ 0.339843] pci 0000:00:1b.0: reg 0x10: [mem 0xc1e14000-0xc1e17fff 64bit]
[ 0.339899] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.339943] pci 0000:00:1c.0: [8086:8c10] type 01 class 0x060400
[ 0.340002] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.340023] pci 0000:00:1c.0: Enabling MPC IRBNCE
[ 0.340025] pci 0000:00:1c.0: Intel PCH root port ACS workaround enabled
[ 0.340064] pci 0000:00:1c.2: [8086:8c14] type 01 class 0x060400
[ 0.340126] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[ 0.340139] pci 0000:00:1c.2: Enabling MPC IRBNCE
[ 0.340141] pci 0000:00:1c.2: Intel PCH root port ACS workaround enabled
[ 0.340181] pci 0000:00:1c.3: [8086:8c16] type 01 class 0x060400
[ 0.340243] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[ 0.340256] pci 0000:00:1c.3: Enabling MPC IRBNCE
[ 0.340258] pci 0000:00:1c.3: Intel PCH root port ACS workaround enabled
[ 0.340295] pci 0000:00:1c.4: [8086:8c18] type 01 class 0x060400
[ 0.340357] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[ 0.340370] pci 0000:00:1c.4: Enabling MPC IRBNCE
[ 0.340372] pci 0000:00:1c.4: Intel PCH root port ACS workaround enabled
[ 0.340414] pci 0000:00:1f.0: [8086:8c4b] type 00 class 0x060100
[ 0.340539] pci 0000:00:1f.3: [8086:8c22] type 00 class 0x0c0500
[ 0.340554] pci 0000:00:1f.3: reg 0x10: [mem 0xc1e19000-0xc1e190ff 64bit]
[ 0.340570] pci 0000:00:1f.3: reg 0x20: [io 0xefa0-0xefbf]
[ 0.340670] pci 0000:01:00.0: [10de:0fe9] type 00 class 0x030000
[ 0.340687] pci 0000:01:00.0: reg 0x10: [mem 0xc0000000-0xc0ffffff]
[ 0.340696] pci 0000:01:00.0: reg 0x14: [mem 0x80000000-0x8fffffff 64bit pref]
[ 0.340705] pci 0000:01:00.0: reg 0x1c: [mem 0x90000000-0x91ffffff 64bit pref]
[ 0.340711] pci 0000:01:00.0: reg 0x24: [io 0x1000-0x107f]
[ 0.340717] pci 0000:01:00.0: reg 0x30: [mem 0xc1000000-0xc107ffff pref]
[ 0.340733] pci 0000:01:00.0: BAR 1: assigned to efifb
[ 0.340824] pci 0000:01:00.1: [10de:0e1b] type 00 class 0x040300
[ 0.340836] pci 0000:01:00.1: reg 0x10: [mem 0xc1080000-0xc1083fff]
[ 0.360022] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 0.360024] pci 0000:00:01.0: bridge window [io 0x1000-0x1fff]
[ 0.360026] pci 0000:00:01.0: bridge window [mem 0xc0000000-0xc10fffff]
[ 0.360028] pci 0000:00:01.0: bridge window [mem 0x80000000-0x91ffffff 64bit pref]
[ 0.360087] pci 0000:06:00.0: [8086:156d] type 01 class 0x060400
[ 0.360173] pci 0000:06:00.0: supports D1 D2
[ 0.360174] pci 0000:06:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.370012] pci 0000:00:01.1: PCI bridge to [bus 06-9c]
[ 0.370014] pci 0000:00:01.1: bridge window [io 0x3000-0x5fff]
[ 0.370016] pci 0000:00:01.1: bridge window [mem 0xc1f00000-0xcdffffff]
[ 0.370019] pci 0000:00:01.1: bridge window [mem 0xce000000-0xd9ffffff 64bit pref]
[ 0.370120] pci 0000:07:00.0: [8086:156d] type 01 class 0x060400
[ 0.370213] pci 0000:07:00.0: supports D1 D2
[ 0.370214] pci 0000:07:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.370281] pci 0000:07:03.0: [8086:156d] type 01 class 0x060400
[ 0.370366] pci 0000:07:03.0: supports D1 D2
[ 0.370367] pci 0000:07:03.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.370428] pci 0000:07:04.0: [8086:156d] type 01 class 0x060400
[ 0.370513] pci 0000:07:04.0: supports D1 D2
[ 0.370513] pci 0000:07:04.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.370576] pci 0000:07:05.0: [8086:156d] type 01 class 0x060400
[ 0.370660] pci 0000:07:05.0: supports D1 D2
[ 0.370661] pci 0000:07:05.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.370726] pci 0000:07:06.0: [8086:156d] type 01 class 0x060400
[ 0.370811] pci 0000:07:06.0: supports D1 D2
[ 0.370811] pci 0000:07:06.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.370885] pci 0000:06:00.0: PCI bridge to [bus 07-6c]
[ 0.370889] pci 0000:06:00.0: bridge window [io 0x3000-0x4fff]
[ 0.370891] pci 0000:06:00.0: bridge window [mem 0xc1f00000-0xc9ffffff]
[ 0.370895] pci 0000:06:00.0: bridge window [mem 0xce000000-0xd5ffffff 64bit pref]
[ 0.370944] pci 0000:08:00.0: [8086:156c] type 00 class 0x088000
[ 0.370970] pci 0000:08:00.0: reg 0x10: [mem 0xc1f00000-0xc1f3ffff]
[ 0.370979] pci 0000:08:00.0: reg 0x14: [mem 0xc1f40000-0xc1f40fff]
[ 0.371102] pci 0000:08:00.0: supports D1 D2
[ 0.371103] pci 0000:08:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.380021] pci 0000:07:00.0: PCI bridge to [bus 08]
[ 0.380027] pci 0000:07:00.0: bridge window [mem 0xc1f00000-0xc1ffffff]
[ 0.380093] pci 0000:07:03.0: PCI bridge to [bus 09-39]
[ 0.380098] pci 0000:07:03.0: bridge window [io 0x3000-0x3fff]
[ 0.380100] pci 0000:07:03.0: bridge window [mem 0xc2000000-0xc5ffffff]
[ 0.380104] pci 0000:07:03.0: bridge window [mem 0xce000000-0xd1ffffff 64bit pref]
[ 0.380160] pci 0000:07:04.0: PCI bridge to [bus 3a]
[ 0.380223] pci 0000:07:05.0: PCI bridge to [bus 3b-6b]
[ 0.380228] pci 0000:07:05.0: bridge window [io 0x4000-0x4fff]
[ 0.380230] pci 0000:07:05.0: bridge window [mem 0xc6000000-0xc9ffffff]
[ 0.380234] pci 0000:07:05.0: bridge window [mem 0xd2000000-0xd5ffffff 64bit pref]
[ 0.380266] pci 0000:07:06.0: PCI bridge to [bus 6c]
[ 0.380339] pci 0000:00:1c.0: PCI bridge to [bus 02]
[ 0.380454] pci 0000:03:00.0: [14e4:43a0] type 00 class 0x028000
[ 0.380518] pci 0000:03:00.0: reg 0x10: [mem 0xc1a00000-0xc1a07fff 64bit]
[ 0.380545] pci 0000:03:00.0: reg 0x18: [mem 0xc1800000-0xc19fffff 64bit]
[ 0.380739] pci 0000:03:00.0: supports D1 D2
[ 0.380740] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.390068] pci 0000:00:1c.2: PCI bridge to [bus 03]
[ 0.390073] pci 0000:00:1c.2: bridge window [mem 0xc1800000-0xc1afffff]
[ 0.390143] pci 0000:04:00.0: [14e4:1570] type 00 class 0x048000
[ 0.390176] pci 0000:04:00.0: reg 0x10: [mem 0xc1d00000-0xc1d0ffff 64bit]
[ 0.390192] pci 0000:04:00.0: reg 0x18: [mem 0xa0000000-0xafffffff 64bit pref]
[ 0.390207] pci 0000:04:00.0: reg 0x20: [mem 0xc1c00000-0xc1cfffff 64bit]
[ 0.390293] pci 0000:04:00.0: supports D1
[ 0.390294] pci 0000:04:00.0: PME# supported from D0 D3hot
[ 0.400027] pci 0000:00:1c.3: PCI bridge to [bus 04]
[ 0.400032] pci 0000:00:1c.3: bridge window [mem 0xc1c00000-0xc1dfffff]
[ 0.400037] pci 0000:00:1c.3: bridge window [mem 0xa0000000-0xafffffff 64bit pref]
[ 0.400153] pci 0000:05:00.0: [144d:1600] type 00 class 0x010601
[ 0.400223] pci 0000:05:00.0: reg 0x24: [mem 0xc1b00000-0xc1b01fff]
[ 0.400233] pci 0000:05:00.0: reg 0x30: [mem 0xffff0000-0xffffffff pref]
[ 0.400298] pci 0000:05:00.0: PME# supported from D3hot D3cold
[ 0.410026] pci 0000:00:1c.4: PCI bridge to [bus 05]
[ 0.410032] pci 0000:00:1c.4: bridge window [mem 0xc1b00000-0xc1bfffff]
[ 0.410957] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
[ 0.411007] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
[ 0.411055] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
[ 0.411108] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
[ 0.411159] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
[ 0.411205] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
[ 0.411261] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
[ 0.411299] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
[ 0.411424] ACPI: EC: interrupt unblocked
[ 0.411434] ACPI: EC: event unblocked
[ 0.411438] ACPI: \_SB_.PCI0.LPCB.EC__: GPE=0x17, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[ 0.411439] ACPI: \_SB_.PCI0.LPCB.EC__: Used as boot DSDT EC to handle transactions and events
[ 0.411479] pci 0000:01:00.0: vgaarb: VGA device added: decodes=io+mem,owns=none,locks=none
[ 0.411479] pci 0000:01:00.0: vgaarb: setting as boot device
[ 0.411479] pci 0000:01:00.0: vgaarb: bridge control possible
[ 0.411479] vgaarb: loaded
[ 0.411479] EDAC MC: Ver: 3.0.0
[ 0.411479] Registered efivars operations
[ 0.650673] PCI: Using ACPI for IRQ routing
[ 0.653788] PCI: pci_cache_line_size set to 64 bytes
[ 0.653990] e820: reserve RAM buffer [mem 0x00058000-0x0005ffff]
[ 0.653991] e820: reserve RAM buffer [mem 0x0008f000-0x0008ffff]
[ 0.653992] e820: reserve RAM buffer [mem 0x6e4b9190-0x6fffffff]
[ 0.653992] e820: reserve RAM buffer [mem 0x6e4bb190-0x6fffffff]
[ 0.653993] e820: reserve RAM buffer [mem 0x7ad14000-0x7bffffff]
[ 0.653994] e820: reserve RAM buffer [mem 0x7ad5f000-0x7bffffff]
[ 0.653995] e820: reserve RAM buffer [mem 0x7ae39000-0x7bffffff]
[ 0.653996] e820: reserve RAM buffer [mem 0x7aed0000-0x7bffffff]
[ 0.653997] e820: reserve RAM buffer [mem 0x7af7a000-0x7bffffff]
[ 0.653997] e820: reserve RAM buffer [mem 0x7b000000-0x7bffffff]
[ 0.653998] e820: reserve RAM buffer [mem 0x47f600000-0x47fffffff]
[ 0.654048] NetLabel: Initializing
[ 0.654049] NetLabel: domain hash size = 128
[ 0.654049] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
[ 0.654058] NetLabel: unlabeled traffic allowed by default
[ 0.654067] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[ 0.654067] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[ 0.655580] clocksource: Switched to clocksource hpet
[ 0.659694] VFS: Disk quotas dquot_6.6.0
[ 0.659707] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.659749] pnp: PnP ACPI init
[ 0.660288] system 00:00: [mem 0xfed00000-0xfed03fff] has been reserved
[ 0.660291] system 00:00: Plug and Play ACPI device, IDs PNP0103 PNP0c01 (active)
[ 0.660317] system 00:01: [io 0xffff] has been reserved
[ 0.660318] system 00:01: [io 0x0400-0x047f] has been reserved
[ 0.660319] system 00:01: [io 0x0800-0x087f] has been reserved
[ 0.660321] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.660331] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.660368] pnp 00:03: Plug and Play ACPI device, IDs APP000b (active)
[ 0.660452] system 00:04: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.660453] system 00:04: [mem 0xfed10000-0xfed17fff] has been reserved
[ 0.660454] system 00:04: [mem 0xfed18000-0xfed18fff] has been reserved
[ 0.660455] system 00:04: [mem 0xfed19000-0xfed19fff] has been reserved
[ 0.660456] system 00:04: [mem 0xe0000000-0xefffffff] could not be reserved
[ 0.660457] system 00:04: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.660457] system 00:04: [mem 0xfed90000-0xfed93fff] could not be reserved
[ 0.660458] system 00:04: [mem 0xfed45000-0xfed8ffff] has been reserved
[ 0.660459] system 00:04: [mem 0xff000000-0xffffffff] could not be reserved
[ 0.660460] system 00:04: [mem 0xfee00000-0xfeefffff] has been reserved
[ 0.660462] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.660487] system 00:05: [mem 0x20000000-0x201fffff] could not be reserved
[ 0.660488] system 00:05: [mem 0x40000000-0x401fffff] could not be reserved
[ 0.660489] system 00:05: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.660583] pnp: PnP ACPI: found 6 devices
[ 0.662142] pci 0000:01:00.0: assigning 43 device properties
[ 0.662224] apple-properties: device path parse error -19 at 0x14:
[ 0.662230] apple-properties: 00000000: 7e 01 00 00 03 00 00 00 02 01 0c 00 d0 41 03 0a ~............A..
[ 0.662235] apple-properties: 00000010: 00 00 00 00 01 01 06 00 00 02 7f ff 04 00 1e 00 ................
[ 0.662239] apple-properties: 00000020: 00 00 73 00 61 00 76 00 65 00 64 00 2d 00 63 00 ..s.a.v.e.d.-.c.
[ 0.662243] apple-properties: 00000030: 6f 00 6e 00 66 00 69 00 67 00 00 00 e2 00 00 00 o.n.f.i.g.......
[ 0.662247] apple-properties: 00000040: 47 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 G...............
[ 0.662251] apple-properties: 00000050: 00 00 03 00 09 00 26 0d 00 a1 07 00 00 00 00 00 ......&.........
[ 0.662255] apple-properties: 00000060: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
[ 0.662259] apple-properties: 00000070: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
[ 0.662263] apple-properties: 00000080: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
[ 0.662267] apple-properties: 00000090: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
[ 0.662271] apple-properties: 000000a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
[ 0.662276] apple-properties: 000000b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
[ 0.662280] apple-properties: 000000c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
[ 0.662284] apple-properties: 000000d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
[ 0.662289] apple-properties: 000000e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
[ 0.662293] apple-properties: 000000f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
[ 0.662297] apple-properties: 00000100: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
[ 0.662301] apple-properties: 00000110: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 2c 00 ..............,.
[ 0.662305] apple-properties: 00000120: 00 00 41 00 41 00 50 00 4c 00 2c 00 69 00 67 00 ..A.A.P.L.,.i.g.
[ 0.662310] apple-properties: 00000130: 2d 00 70 00 6c 00 61 00 74 00 66 00 6f 00 72 00 -.p.l.a.t.f.o.r.
[ 0.662314] apple-properties: 00000140: 6d 00 2d 00 69 00 64 00 00 00 08 00 00 00 09 00 m.-.i.d.........
[ 0.662318] apple-properties: 00000150: 26 0d 24 00 00 00 67 00 72 00 61 00 70 00 68 00 &.$...g.r.a.p.h.
[ 0.662323] apple-properties: 00000160: 69 00 63 00 2d 00 6f 00 70 00 74 00 69 00 6f 00 i.c.-.o.p.t.i.o.
[ 0.662326] apple-properties: 00000170: 6e 00 73 00 00 00 08 00 00 00 0c 00 00 00 n.s...........
[ 0.662349] pci 0000:08:00.0: assigning 7 device properties
[ 0.662382] pci 0000:00:1b.0: assigning 4 device properties
[ 0.666953] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[ 0.666957] pci 0000:05:00.0: can't claim BAR 6 [mem 0xffff0000-0xffffffff pref]: no compatible bridge window
[ 0.666967] pci 0000:07:00.0: bridge window [io 0x1000-0x0fff] to [bus 08] add_size 1000
[ 0.666968] pci 0000:07:00.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 08] add_size 200000 add_align 100000
[ 0.666978] pci 0000:07:04.0: bridge window [io 0x1000-0x0fff] to [bus 3a] add_size 1000
[ 0.666979] pci 0000:07:04.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 3a] add_size 200000 add_align 100000
[ 0.666980] pci 0000:07:04.0: bridge window [mem 0x00100000-0x000fffff] to [bus 3a] add_size 200000 add_align 100000
[ 0.666990] pci 0000:07:06.0: bridge window [io 0x1000-0x0fff] to [bus 6c] add_size 1000
[ 0.666991] pci 0000:07:06.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 6c] add_size 200000 add_align 100000
[ 0.666992] pci 0000:07:06.0: bridge window [mem 0x00100000-0x000fffff] to [bus 6c] add_size 200000 add_align 100000
[ 0.667010] pci 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [bus 02] add_size 1000
[ 0.667011] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 02] add_size 200000 add_align 100000
[ 0.667012] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 02] add_size 200000 add_align 100000
[ 0.667033] pci 0000:00:1c.0: BAR 14: assigned [mem 0x7fa00000-0x7fbfffff]
[ 0.667040] pci 0000:00:1c.0: BAR 15: assigned [mem 0x7fc00000-0x7fdfffff 64bit pref]
[ 0.667041] pci 0000:00:1c.0: BAR 13: assigned [io 0x2000-0x2fff]
[ 0.667043] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 0.667044] pci 0000:00:01.0: bridge window [io 0x1000-0x1fff]
[ 0.667046] pci 0000:00:01.0: bridge window [mem 0xc0000000-0xc10fffff]
[ 0.667047] pci 0000:00:01.0: bridge window [mem 0x80000000-0x91ffffff 64bit pref]
[ 0.667052] pci 0000:07:00.0: BAR 15: no space for [mem size 0x00200000 64bit pref]
[ 0.667053] pci 0000:07:00.0: BAR 15: failed to assign [mem size 0x00200000 64bit pref]
[ 0.667054] pci 0000:07:04.0: BAR 14: no space for [mem size 0x00200000]
[ 0.667055] pci 0000:07:04.0: BAR 14: failed to assign [mem size 0x00200000]
[ 0.667056] pci 0000:07:04.0: BAR 15: no space for [mem size 0x00200000 64bit pref]
[ 0.667057] pci 0000:07:04.0: BAR 15: failed to assign [mem size 0x00200000 64bit pref]
[ 0.667058] pci 0000:07:06.0: BAR 14: no space for [mem size 0x00200000]
[ 0.667058] pci 0000:07:06.0: BAR 14: failed to assign [mem size 0x00200000]
[ 0.667060] pci 0000:07:06.0: BAR 15: no space for [mem size 0x00200000 64bit pref]
[ 0.667060] pci 0000:07:06.0: BAR 15: failed to assign [mem size 0x00200000 64bit pref]
[ 0.667061] pci 0000:07:00.0: BAR 13: no space for [io size 0x1000]
[ 0.667062] pci 0000:07:00.0: BAR 13: failed to assign [io size 0x1000]
[ 0.667062] pci 0000:07:04.0: BAR 13: no space for [io size 0x1000]
[ 0.667063] pci 0000:07:04.0: BAR 13: failed to assign [io size 0x1000]
[ 0.667064] pci 0000:07:06.0: BAR 13: no space for [io size 0x1000]
[ 0.667064] pci 0000:07:06.0: BAR 13: failed to assign [io size 0x1000]
[ 0.667066] pci 0000:07:06.0: BAR 14: no space for [mem size 0x00200000]
[ 0.667066] pci 0000:07:06.0: BAR 14: failed to assign [mem size 0x00200000]
[ 0.667068] pci 0000:07:06.0: BAR 15: no space for [mem size 0x00200000 64bit pref]
[ 0.667069] pci 0000:07:06.0: BAR 15: failed to assign [mem size 0x00200000 64bit pref]
[ 0.667069] pci 0000:07:06.0: BAR 13: no space for [io size 0x1000]
[ 0.667070] pci 0000:07:06.0: BAR 13: failed to assign [io size 0x1000]
[ 0.667071] pci 0000:07:04.0: BAR 14: no space for [mem size 0x00200000]
[ 0.667071] pci 0000:07:04.0: BAR 14: failed to assign [mem size 0x00200000]
[ 0.667073] pci 0000:07:04.0: BAR 15: no space for [mem size 0x00200000 64bit pref]
[ 0.667073] pci 0000:07:04.0: BAR 15: failed to assign [mem size 0x00200000 64bit pref]
[ 0.667074] pci 0000:07:04.0: BAR 13: no space for [io size 0x1000]
[ 0.667075] pci 0000:07:04.0: BAR 13: failed to assign [io size 0x1000]
[ 0.667076] pci 0000:07:00.0: BAR 15: no space for [mem size 0x00200000 64bit pref]
[ 0.667077] pci 0000:07:00.0: BAR 15: failed to assign [mem size 0x00200000 64bit pref]
[ 0.667077] pci 0000:07:00.0: BAR 13: no space for [io size 0x1000]
[ 0.667078] pci 0000:07:00.0: BAR 13: failed to assign [io size 0x1000]
[ 0.667079] pci 0000:07:00.0: PCI bridge to [bus 08]
[ 0.667082] pci 0000:07:00.0: bridge window [mem 0xc1f00000-0xc1ffffff]
[ 0.667088] pci 0000:07:03.0: PCI bridge to [bus 09-39]
[ 0.667089] pci 0000:07:03.0: bridge window [io 0x3000-0x3fff]
[ 0.667092] pci 0000:07:03.0: bridge window [mem 0xc2000000-0xc5ffffff]
[ 0.667094] pci 0000:07:03.0: bridge window [mem 0xce000000-0xd1ffffff 64bit pref]
[ 0.667098] pci 0000:07:04.0: PCI bridge to [bus 3a]
[ 0.667105] pci 0000:07:05.0: PCI bridge to [bus 3b-6b]
[ 0.667107] pci 0000:07:05.0: bridge window [io 0x4000-0x4fff]
[ 0.667110] pci 0000:07:05.0: bridge window [mem 0xc6000000-0xc9ffffff]
[ 0.667112] pci 0000:07:05.0: bridge window [mem 0xd2000000-0xd5ffffff 64bit pref]
[ 0.667115] pci 0000:07:06.0: PCI bridge to [bus 6c]
[ 0.667123] pci 0000:06:00.0: PCI bridge to [bus 07-6c]
[ 0.667124] pci 0000:06:00.0: bridge window [io 0x3000-0x4fff]
[ 0.667127] pci 0000:06:00.0: bridge window [mem 0xc1f00000-0xc9ffffff]
[ 0.667129] pci 0000:06:00.0: bridge window [mem 0xce000000-0xd5ffffff 64bit pref]
[ 0.667132] pci 0000:00:01.1: PCI bridge to [bus 06-9c]
[ 0.667133] pci 0000:00:01.1: bridge window [io 0x3000-0x5fff]
[ 0.667135] pci 0000:00:01.1: bridge window [mem 0xc1f00000-0xcdffffff]
[ 0.667136] pci 0000:00:01.1: bridge window [mem 0xce000000-0xd9ffffff 64bit pref]
[ 0.667138] pci 0000:00:1c.0: PCI bridge to [bus 02]
[ 0.667145] pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff]
[ 0.667149] pci 0000:00:1c.0: bridge window [mem 0x7fa00000-0x7fbfffff]
[ 0.667152] pci 0000:00:1c.0: bridge window [mem 0x7fc00000-0x7fdfffff 64bit pref]
[ 0.667157] pci 0000:00:1c.2: PCI bridge to [bus 03]
[ 0.667160] pci 0000:00:1c.2: bridge window [mem 0xc1800000-0xc1afffff]
[ 0.667167] pci 0000:00:1c.3: PCI bridge to [bus 04]
[ 0.667170] pci 0000:00:1c.3: bridge window [mem 0xc1c00000-0xc1dfffff]
[ 0.667173] pci 0000:00:1c.3: bridge window [mem 0xa0000000-0xafffffff 64bit pref]
[ 0.667178] pci 0000:05:00.0: BAR 6: assigned [mem 0xc1b10000-0xc1b1ffff pref]
[ 0.667179] pci 0000:00:1c.4: PCI bridge to [bus 05]
[ 0.667183] pci 0000:00:1c.4: bridge window [mem 0xc1b00000-0xc1bfffff]
[ 0.667189] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
[ 0.667190] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
[ 0.667191] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[ 0.667192] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff window]
[ 0.667192] pci_bus 0000:00: resource 8 [mem 0x000c4000-0x000c7fff window]
[ 0.667193] pci_bus 0000:00: resource 9 [mem 0x000c8000-0x000cbfff window]
[ 0.667194] pci_bus 0000:00: resource 10 [mem 0x000cc000-0x000cffff window]
[ 0.667194] pci_bus 0000:00: resource 11 [mem 0x000d0000-0x000d3fff window]
[ 0.667195] pci_bus 0000:00: resource 12 [mem 0x000d4000-0x000d7fff window]
[ 0.667196] pci_bus 0000:00: resource 13 [mem 0x000d8000-0x000dbfff window]
[ 0.667196] pci_bus 0000:00: resource 14 [mem 0x000dc000-0x000dffff window]
[ 0.667197] pci_bus 0000:00: resource 15 [mem 0x000e0000-0x000e3fff window]
[ 0.667197] pci_bus 0000:00: resource 16 [mem 0x000e4000-0x000e7fff window]
[ 0.667198] pci_bus 0000:00: resource 17 [mem 0x000e8000-0x000ebfff window]
[ 0.667199] pci_bus 0000:00: resource 18 [mem 0x000ec000-0x000effff window]
[ 0.667199] pci_bus 0000:00: resource 19 [mem 0x000f0000-0x000fffff window]
[ 0.667200] pci_bus 0000:00: resource 20 [mem 0x7fa00000-0xfeafffff window]
[ 0.667201] pci_bus 0000:00: resource 21 [mem 0xfed40000-0xfed44fff window]
[ 0.667202] pci_bus 0000:01: resource 0 [io 0x1000-0x1fff]
[ 0.667202] pci_bus 0000:01: resource 1 [mem 0xc0000000-0xc10fffff]
[ 0.667203] pci_bus 0000:01: resource 2 [mem 0x80000000-0x91ffffff 64bit pref]
[ 0.667204] pci_bus 0000:06: resource 0 [io 0x3000-0x5fff]
[ 0.667204] pci_bus 0000:06: resource 1 [mem 0xc1f00000-0xcdffffff]
[ 0.667205] pci_bus 0000:06: resource 2 [mem 0xce000000-0xd9ffffff 64bit pref]
[ 0.667206] pci_bus 0000:07: resource 0 [io 0x3000-0x4fff]
[ 0.667206] pci_bus 0000:07: resource 1 [mem 0xc1f00000-0xc9ffffff]
[ 0.667207] pci_bus 0000:07: resource 2 [mem 0xce000000-0xd5ffffff 64bit pref]
[ 0.667208] pci_bus 0000:08: resource 1 [mem 0xc1f00000-0xc1ffffff]
[ 0.667208] pci_bus 0000:09: resource 0 [io 0x3000-0x3fff]
[ 0.667209] pci_bus 0000:09: resource 1 [mem 0xc2000000-0xc5ffffff]
[ 0.667210] pci_bus 0000:09: resource 2 [mem 0xce000000-0xd1ffffff 64bit pref]
[ 0.667211] pci_bus 0000:3b: resource 0 [io 0x4000-0x4fff]
[ 0.667211] pci_bus 0000:3b: resource 1 [mem 0xc6000000-0xc9ffffff]
[ 0.667212] pci_bus 0000:3b: resource 2 [mem 0xd2000000-0xd5ffffff 64bit pref]
[ 0.667213] pci_bus 0000:02: resource 0 [io 0x2000-0x2fff]
[ 0.667213] pci_bus 0000:02: resource 1 [mem 0x7fa00000-0x7fbfffff]
[ 0.667214] pci_bus 0000:02: resource 2 [mem 0x7fc00000-0x7fdfffff 64bit pref]
[ 0.667215] pci_bus 0000:03: resource 1 [mem 0xc1800000-0xc1afffff]
[ 0.667215] pci_bus 0000:04: resource 1 [mem 0xc1c00000-0xc1dfffff]
[ 0.667216] pci_bus 0000:04: resource 2 [mem 0xa0000000-0xafffffff 64bit pref]
[ 0.667217] pci_bus 0000:05: resource 1 [mem 0xc1b00000-0xc1bfffff]
[ 0.667310] NET: Registered protocol family 2
[ 0.667413] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.667539] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.667643] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.667669] UDP hash table entries: 8192 (order: 6, 262144 bytes)
[ 0.667702] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes)
[ 0.667759] NET: Registered protocol family 1
[ 0.668000] PCI: CLS 256 bytes, default 64
[ 0.668023] Unpacking initramfs...
[ 0.699712] Freeing initrd memory: 24528K
[ 0.699739] DMAR: No ATSR found
[ 0.699767] DMAR: dmar1: Using Queued invalidation
[ 0.699775] DMAR: Setting RMRR:
[ 0.699775] DMAR: Prepare 0-16MiB unity mapping for LPC
[ 0.699828] DMAR: Setting identity map for device 0000:00:1f.0 [0x0 - 0xffffff]
[ 0.699912] DMAR: Intel(R) Virtualization Technology for Directed I/O
[ 0.699940] iommu: Adding device 0000:00:00.0 to group 0
[ 0.699952] iommu: Adding device 0000:00:01.0 to group 1
[ 0.699958] iommu: Adding device 0000:00:01.1 to group 1
[ 0.699964] iommu: Adding device 0000:00:14.0 to group 2
[ 0.699971] iommu: Adding device 0000:00:16.0 to group 3
[ 0.699976] iommu: Adding device 0000:00:1b.0 to group 4
[ 0.699981] iommu: Adding device 0000:00:1c.0 to group 5
[ 0.699987] iommu: Adding device 0000:00:1c.2 to group 6
[ 0.699992] iommu: Adding device 0000:00:1c.3 to group 7
[ 0.699998] iommu: Adding device 0000:00:1c.4 to group 8
[ 0.700019] iommu: Adding device 0000:00:1f.0 to group 9
[ 0.700025] iommu: Adding device 0000:00:1f.3 to group 9
[ 0.700029] iommu: Adding device 0000:01:00.0 to group 1
[ 0.700032] iommu: Adding device 0000:01:00.1 to group 1
[ 0.700035] iommu: Adding device 0000:06:00.0 to group 1
[ 0.700038] iommu: Adding device 0000:07:00.0 to group 1
[ 0.700041] iommu: Adding device 0000:07:03.0 to group 1
[ 0.700044] iommu: Adding device 0000:07:04.0 to group 1
[ 0.700048] iommu: Adding device 0000:07:05.0 to group 1
[ 0.700051] iommu: Adding device 0000:07:06.0 to group 1
[ 0.700057] iommu: Adding device 0000:08:00.0 to group 1
[ 0.700062] iommu: Adding device 0000:03:00.0 to group 10
[ 0.700068] iommu: Adding device 0000:04:00.0 to group 11
[ 0.700073] iommu: Adding device 0000:05:00.0 to group 12
[ 0.701292] Scanning for low memory corruption every 60 seconds
[ 0.701680] Initialise system trusted keyrings
[ 0.701688] Key type blacklist registered
[ 0.701734] workingset: timestamp_bits=41 max_order=22 bucket_order=0
[ 0.702354] zbud: loaded
[ 0.703331] Key type asymmetric registered
[ 0.703366] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247)
[ 0.703392] io scheduler noop registered
[ 0.703393] io scheduler deadline registered
[ 0.703428] io scheduler cfq registered (default)
[ 0.703429] io scheduler mq-deadline registered
[ 0.703429] io scheduler kyber registered
[ 0.703446] io scheduler bfq registered
[ 0.703756] pcieport 0000:00:1c.0: enabling device (0000 -> 0003)
[ 0.704355] pcieport 0000:07:03.0: enabling device (0000 -> 0003)
[ 0.704580] pcieport 0000:07:05.0: enabling device (0000 -> 0003)
[ 0.704815] pciehp 0000:00:1c.0:pcie004: Slot #0 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Interlock- NoCompl+ LLActRep+
[ 0.704849] pciehp 0000:07:00.0:pcie204: Slot #0 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Interlock- NoCompl+ LLActRep+
[ 0.704875] pciehp 0000:07:03.0:pcie204: Slot #3 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Interlock- NoCompl+ LLActRep+
[ 0.704900] pciehp 0000:07:04.0:pcie204: Slot #4 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Interlock- NoCompl+ LLActRep+
[ 0.704924] pciehp 0000:07:05.0:pcie204: Slot #5 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Interlock- NoCompl+ LLActRep+
[ 0.704946] pciehp 0000:07:06.0:pcie204: Slot #6 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Interlock- NoCompl+ LLActRep+
[ 0.704975] efifb: probing for efifb
[ 0.705001] efifb: framebuffer at 0x80020000, using 28800k, total 28800k
[ 0.705002] efifb: mode is 2880x1800x32, linelength=16384, pages=1
[ 0.705002] efifb: scrolling: redraw
[ 0.705003] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ 0.719206] Console: switching to colour frame buffer device 360x112
[ 0.733278] fb0: EFI VGA frame buffer device
[ 0.733283] intel_idle: MWAIT substates: 0x42120
[ 0.733284] intel_idle: v0.4.1 model 0x46
[ 0.733548] intel_idle: lapic_timer_reliable_states 0xffffffff
[ 0.733888] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.734646] rtc_cmos 00:02: RTC can wake from S4
[ 0.734751] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
[ 0.734775] rtc_cmos 00:02: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[ 0.734784] intel_pstate: Intel P-state driver initializing
[ 0.735305] ledtrig-cpu: registered to indicate activity on CPUs
[ 0.735373] vlv2_plat_clk vlv2_plat_clk: vlv2_plat_clk initialized
[ 0.735865] NET: Registered protocol family 10
[ 0.744664] Segment Routing with IPv6
[ 0.744710] NET: Registered protocol family 17
[ 0.746099] RAS: Correctable Errors collector initialized.
[ 0.746194] microcode: sig=0x40661, pf=0x20, revision=0x17
[ 0.746518] microcode: Microcode Update Driver: v2.2.
[ 0.746538] sched_clock: Marking stable (746508985, 0)->(823043390, -76534405)
[ 0.747116] registered taskstats version 1
[ 0.747135] Loading compiled-in X.509 certificates
[ 0.747172] zswap: loaded using pool lzo/zbud
[ 0.752769] Key type big_key registered
[ 0.753886] Magic number: 13:509:505
[ 0.754109] rtc_cmos 00:02: setting system clock to 2017-12-28 23:29:30 UTC (1514503770)
[ 0.758189] Freeing unused kernel memory: 1312K
[ 0.758191] Write protecting the kernel read-only data: 12288k
[ 0.758904] Freeing unused kernel memory: 1528K
[ 0.763932] Freeing unused kernel memory: 1308K
[ 1.228031] systemd[1]: systemd 236 running in system mode. (+PAM -AUDIT -SELINUX -IMA -APPARMOR +SMACK -SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN default-hierarchy=hybrid)
[ 1.228161] systemd[1]: Detected architecture x86-64.
[ 1.228162] systemd[1]: Running in initial RAM disk.
[ 1.228165] systemd[1]: No hostname configured.
[ 1.228167] systemd[1]: Set hostname to <archlinux>.
[ 1.228185] systemd[1]: Initializing machine ID from random generator.
[ 1.284900] systemd[1]: System is tainted: var-run-bad
[ 1.284989] systemd[1]: Reached target Swap.
[ 1.285267] systemd[1]: Created slice system.slice.
[ 1.285314] systemd[1]: Listening on LVM2 metadata daemon socket.
[ 1.328285] ACPI: bus type USB registered
[ 1.328298] usbcore: registered new interface driver usbfs
[ 1.328303] usbcore: registered new interface driver hub
[ 1.328328] usbcore: registered new device driver usb
[ 1.329022] SCSI subsystem initialized
[ 1.330940] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 1.330946] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
[ 1.331725] AVX2 version of gcm_enc/dec engaged.
[ 1.331726] AES CTR mode by8 optimization enabled
[ 1.332124] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x00009890
[ 1.332129] xhci_hcd 0000:00:14.0: cache line size of 256 is not supported
[ 1.332270] libata version 3.00 loaded.
[ 1.332310] hub 1-0:1.0: USB hub found
[ 1.332329] hub 1-0:1.0: 14 ports detected
[ 1.332692] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 1.332694] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
[ 1.332835] hub 2-0:1.0: USB hub found
[ 1.332848] hub 2-0:1.0: 6 ports detected
[ 1.333145] ahci 0000:05:00.0: version 3.0
[ 1.343432] ahci 0000:05:00.0: AHCI 0001.0300 32 slots 1 ports 6 Gbps 0x1 impl SATA mode
[ 1.343434] ahci 0000:05:00.0: flags: 64bit ncq led clo only pio ccc
[ 1.343702] scsi host0: ahci
[ 1.343757] ata1: SATA max UDMA/133 abar m8192@0xc1b00000 port 0xc1b00100 irq 16
[ 1.653505] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 1.653896] ata1.00: unexpected _GTF length (8)
[ 1.654079] ata1.00: ATA-8: APPLE SSD SM0512F, UXM2JA1Q, max UDMA/133
[ 1.654082] ata1.00: 977105060 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 1.654451] ata1.00: unexpected _GTF length (8)
[ 1.654589] ata1.00: configured for UDMA/133
[ 1.654892] scsi 0:0:0:0: Direct-Access ATA APPLE SSD SM0512 JA1Q PQ: 0 ANSI: 5
[ 1.658326] sd 0:0:0:0: [sda] 977105060 512-byte logical blocks: (500 GB/466 GiB)
[ 1.658329] sd 0:0:0:0: [sda] 4096-byte physical blocks
[ 1.658368] sd 0:0:0:0: [sda] Write Protect is off
[ 1.658372] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.658444] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.660111] usb 2-4: new SuperSpeed USB device number 2 using xhci_hcd
[ 1.661053] sda: sda1 sda2 sda3
[ 1.661756] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.681090] usb-storage 2-4:1.0: USB Mass Storage device detected
[ 1.681242] scsi host1: usb-storage 2-4:1.0
[ 1.681315] usbcore: registered new interface driver usb-storage
[ 1.681633] usbcore: registered new interface driver uas
[ 1.706597] tsc: Refined TSC clocksource calibration: 2294.687 MHz
[ 1.706609] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x21139a22526, max_idle_ns: 440795252169 ns
[ 1.718889] device-mapper: uevent: version 1.0.3
[ 1.718941] device-mapper: ioctl: 4.37.0-ioctl (2017-09-20) initialised: dm-devel@redhat.com
[ 1.736491] PM: Starting manual resume from disk
[ 1.736681] PM: Image not found (code -22)
[ 1.790727] EXT4-fs (dm-1): mounted filesystem with ordered data mode. Opts: (null)
[ 1.800017] usb 1-8: new full-speed USB device number 2 using xhci_hcd
[ 1.918674] systemd-journald[143]: Received SIGTERM from PID 1 (systemd).
[ 1.932287] systemd: 23 output lines suppressed due to ratelimiting
[ 1.944529] hub 1-8:1.0: USB hub found
[ 1.944653] hub 1-8:1.0: 3 ports detected
[ 1.996523] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 2.066613] usb 1-12: new full-speed USB device number 3 using xhci_hcd
[ 2.140491] acpi_call: loading out-of-tree module taints kernel.
[ 2.179757] systemd-journald[289]: Received request to flush runtime journal from PID 1
[ 2.235837] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0
[ 2.235886] ACPI: Lid Switch [LID0]
[ 2.235953] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
[ 2.235970] ACPI: Power Button [PWRB]
[ 2.236053] ACPI: AC Adapter [ADP1] (off-line)
[ 2.236112] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input2
[ 2.236122] ACPI: Sleep Button [SLPB]
[ 2.236164] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[ 2.236179] ACPI: Power Button [PWRF]
[ 2.238585] [Firmware Bug]: ACPI(GFX0) defines _DOD but not _DOS
[ 2.238609] ACPI: Video Device [GFX0] (multi-head: yes rom: yes post: no)
[ 2.240291] acpi device:02: registered as cooling_device8
[ 2.240326] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:01/LNXVIDEO:00/input/input4
[ 2.246066] apple_gmux: Found gmux version 4.0.8 [indexed]
[ 2.248805] ACPI: SBS HC: EC = 0xffff885aec72f800, offset = 0x20, query_bit = 0x10
[ 2.280042] usb 1-8.1: new full-speed USB device number 4 using xhci_hcd
[ 2.300117] input: PC Speaker as /devices/platform/pcspkr/input/input5
[ 2.300676] ACPI Warning: SystemIO range 0x0000000000000840-0x000000000000084F conflicts with OpRegion 0x0000000000000800-0x0000000000000863 (\GPIO) (20170728/utaddress-247)
[ 2.300681] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 2.300682] ACPI Warning: SystemIO range 0x0000000000000830-0x000000000000083F conflicts with OpRegion 0x0000000000000800-0x0000000000000863 (\GPIO) (20170728/utaddress-247)
[ 2.300685] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 2.300686] ACPI Warning: SystemIO range 0x0000000000000800-0x000000000000082F conflicts with OpRegion 0x0000000000000800-0x0000000000000863 (\GPIO) (20170728/utaddress-247)
[ 2.300690] ACPI Warning: SystemIO range 0x0000000000000800-0x000000000000082F conflicts with OpRegion 0x0000000000000810-0x0000000000000813 (\IO_D) (20170728/utaddress-247)
[ 2.300693] ACPI Warning: SystemIO range 0x0000000000000800-0x000000000000082F conflicts with OpRegion 0x0000000000000800-0x000000000000080F (\IO_T) (20170728/utaddress-247)
[ 2.300696] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 2.300697] lpc_ich: Resource conflict(s) found affecting gpio_ich
[ 2.300822] RAPL PMU: API unit is 2^-32 Joules, 4 fixed counters, 655360 ms ovfl timer
[ 2.300823] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules
[ 2.300824] RAPL PMU: hw unit of domain package 2^-14 Joules
[ 2.300824] RAPL PMU: hw unit of domain dram 2^-14 Joules
[ 2.300825] RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules
[ 2.300982] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
[ 2.302090] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 2.320829] Linux agpgart interface v0.103
[ 2.335305] thunderbolt 0000:08:00.0: NHI initialized, starting thunderbolt
[ 2.335308] thunderbolt 0000:08:00.0: allocating TX ring 0 of size 10
[ 2.335399] thunderbolt 0000:08:00.0: allocating RX ring 0 of size 10
[ 2.335416] thunderbolt 0000:08:00.0: control channel created
[ 2.335417] thunderbolt 0000:08:00.0: control channel starting...
[ 2.335418] thunderbolt 0000:08:00.0: starting TX ring 0
[ 2.335424] thunderbolt 0000:08:00.0: enabling interrupt at register 0x38200 bit 0 (0x0 -> 0x1)
[ 2.335426] thunderbolt 0000:08:00.0: starting RX ring 0
[ 2.335431] thunderbolt 0000:08:00.0: enabling interrupt at register 0x38200 bit 12 (0x1 -> 0x1001)
[ 2.335489] thunderbolt 0000:08:00.0: current switch config:
[ 2.335491] thunderbolt 0000:08:00.0: Switch: 8086:156d (Revision: 0, TB Version: 2)
[ 2.335492] thunderbolt 0000:08:00.0: Max Port Number: 12
[ 2.335492] thunderbolt 0000:08:00.0: Config:
[ 2.335493] thunderbolt 0000:08:00.0: Upstream Port Number: 5 Depth: 0 Route String: 0x0 Enabled: 1, PlugEventsDelay: 255ms
[ 2.335494] thunderbolt 0000:08:00.0: unknown1: 0x0 unknown4: 0x0
[ 2.335541] thunderbolt 0000:08:00.0: initializing Switch at 0x0 (depth: 0, up port: 5)
[ 2.335711] thunderbolt 0000:08:00.0: 0: uid: 0x1000f010af760
[ 2.335854] thunderbolt 0000:08:00.0: Port 0: 8086:156d (Revision: 0, TB Version: 1, Type: Port (0x1))
[ 2.335855] thunderbolt 0000:08:00.0: Max hop id (in/out): 7/7
[ 2.335856] thunderbolt 0000:08:00.0: Max counters: 8
[ 2.335857] thunderbolt 0000:08:00.0: NFC Credits: 0x700000
[ 2.335913] thunderbolt 0000:08:00.0: Port 1: 8086:156d (Revision: 0, TB Version: 1, Type: Port (0x1))
[ 2.335914] thunderbolt 0000:08:00.0: Max hop id (in/out): 15/15
[ 2.335914] thunderbolt 0000:08:00.0: Max counters: 16
[ 2.335915] thunderbolt 0000:08:00.0: NFC Credits: 0x3c00000
[ 2.335980] thunderbolt 0000:08:00.0: Port 2: 8086:156d (Revision: 0, TB Version: 1, Type: Port (0x1))
[ 2.335982] thunderbolt 0000:08:00.0: Max hop id (in/out): 15/15
[ 2.335983] thunderbolt 0000:08:00.0: Max counters: 16
[ 2.335984] thunderbolt 0000:08:00.0: NFC Credits: 0x3c00000
[ 2.336049] thunderbolt 0000:08:00.0: Port 3: 8086:156d (Revision: 0, TB Version: 1, Type: Port (0x1))
[ 2.336050] thunderbolt 0000:08:00.0: Max hop id (in/out): 15/15
[ 2.336051] thunderbolt 0000:08:00.0: Max counters: 16
[ 2.336052] thunderbolt 0000:08:00.0: NFC Credits: 0x3c00000
[ 2.336124] thunderbolt 0000:08:00.0: Port 4: 8086:156d (Revision: 0, TB Version: 1, Type: Port (0x1))
[ 2.336125] thunderbolt 0000:08:00.0: Max hop id (in/out): 15/15
[ 2.336126] thunderbolt 0000:08:00.0: Max counters: 16
[ 2.336127] thunderbolt 0000:08:00.0: NFC Credits: 0x3c00000
[ 2.336148] thunderbolt 0000:08:00.0: Port 5: 8086:156d (Revision: 0, TB Version: 1, Type: NHI (0x2))
[ 2.336150] thunderbolt 0000:08:00.0: Max hop id (in/out): 11/11
[ 2.336150] thunderbolt 0000:08:00.0: Max counters: 16
[ 2.336152] thunderbolt 0000:08:00.0: NFC Credits: 0xf00000
[ 2.336169] thunderbolt 0000:08:00.0: Port 6: 8086:156d (Revision: 0, TB Version: 1, Type: PCIe (0x100101))
[ 2.336170] thunderbolt 0000:08:00.0: Max hop id (in/out): 8/8
[ 2.336171] thunderbolt 0000:08:00.0: Max counters: 2
[ 2.336172] thunderbolt 0000:08:00.0: NFC Credits: 0x700000
[ 2.336189] thunderbolt 0000:08:00.0: Port 7: 8086:156d (Revision: 0, TB Version: 1, Type: PCIe (0x100101))
[ 2.336190] thunderbolt 0000:08:00.0: Max hop id (in/out): 8/8
[ 2.336191] thunderbolt 0000:08:00.0: Max counters: 2
[ 2.336192] thunderbolt 0000:08:00.0: NFC Credits: 0x700000
[ 2.336209] thunderbolt 0000:08:00.0: Port 8: 8086:156d (Revision: 0, TB Version: 1, Type: PCIe (0x100101))
[ 2.336210] thunderbolt 0000:08:00.0: Max hop id (in/out): 8/8
[ 2.336211] thunderbolt 0000:08:00.0: Max counters: 2
[ 2.336212] thunderbolt 0000:08:00.0: NFC Credits: 0x700000
[ 2.336229] thunderbolt 0000:08:00.0: Port 9: 8086:156d (Revision: 0, TB Version: 1, Type: PCIe (0x100101))
[ 2.336230] thunderbolt 0000:08:00.0: Max hop id (in/out): 8/8
[ 2.336230] thunderbolt 0000:08:00.0: Max counters: 2
[ 2.336231] thunderbolt 0000:08:00.0: NFC Credits: 0x700000
[ 2.336232] thunderbolt 0000:08:00.0: 0:a: disabled by eeprom
[ 2.336255] thunderbolt 0000:08:00.0: Port 11: 8086:156d (Revision: 0, TB Version: 1, Type: DP/HDMI (0xe0101))
[ 2.336256] thunderbolt 0000:08:00.0: Max hop id (in/out): 9/9
[ 2.336257] thunderbolt 0000:08:00.0: Max counters: 2
[ 2.336258] thunderbolt 0000:08:00.0: NFC Credits: 0xf00000
[ 2.336276] thunderbolt 0000:08:00.0: Port 12: 8086:156d (Revision: 0, TB Version: 1, Type: DP/HDMI (0xe0101))
[ 2.336277] thunderbolt 0000:08:00.0: Max hop id (in/out): 9/9
[ 2.336278] thunderbolt 0000:08:00.0: Max counters: 2
[ 2.336279] thunderbolt 0000:08:00.0: NFC Credits: 0xf00000
[ 2.336315] thunderbolt 0000:08:00.0: 0:1: is unplugged (state: 7)
[ 2.336329] thunderbolt 0000:08:00.0: 0:3: is unplugged (state: 7)
[ 2.377670] wl: module license 'MIXED/Proprietary' taints kernel.
[ 2.377671] Disabling lock debugging due to kernel taint
[ 2.401997] snd_hda_intel 0000:01:00.1: enabling device (0000 -> 0002)
[ 2.402078] snd_hda_intel 0000:01:00.1: Disabling MSI
[ 2.402083] snd_hda_intel 0000:01:00.1: Handle vga_switcheroo audio client
[ 2.409062] intel_rapl: Found RAPL domain package
[ 2.409064] intel_rapl: Found RAPL domain core
[ 2.409064] intel_rapl: Found RAPL domain uncore
[ 2.409065] intel_rapl: Found RAPL domain dram
[ 2.413471] wlan0: Broadcom BCM43a0 802.11 Hybrid Wireless Controller 6.30.223.271 (r587334)
[ 2.421781] snd_hda_codec_cirrus hdaudioC0D0: autoconfig for CS4208: line_outs=2 (0x12/0x13/0x0/0x0/0x0) type:speaker
[ 2.421782] snd_hda_codec_cirrus hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 2.421783] snd_hda_codec_cirrus hdaudioC0D0: hp_outs=1 (0x10/0x0/0x0/0x0/0x0)
[ 2.421784] snd_hda_codec_cirrus hdaudioC0D0: mono: mono_out=0x0
[ 2.421784] snd_hda_codec_cirrus hdaudioC0D0: dig-out=0x21/0x0
[ 2.421785] snd_hda_codec_cirrus hdaudioC0D0: inputs:
[ 2.421786] snd_hda_codec_cirrus hdaudioC0D0: Internal Mic=0x1c
[ 2.421786] snd_hda_codec_cirrus hdaudioC0D0: Mic=0x18
[ 2.429183] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input6
[ 2.429209] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7
[ 2.429231] input: HDA Intel PCH SPDIF as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
[ 2.438909] applesmc: key=661 fan=2 temp=41 index=40 acc=0 lux=2 kbd=1
[ 2.439060] applesmc applesmc.768: hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info().
[ 2.443282] usb 1-8.2: new full-speed USB device number 5 using xhci_hcd
[ 2.470337] (NULL device *): hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info().
[ 2.470354] ACPI: Smart Battery System [SBS0]: Battery Slot [BAT0] (battery present)
[ 2.484129] ACPI Warning: \_SB.PCI0.P0P2.GFX0._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20170728/nsarguments-100)
[ 2.484139] ACPI: \_SB_.PCI0.P0P2.GFX0: failed to evaluate _DSM
[ 2.484174] nouveau 0000:01:00.0: enabling device (0006 -> 0007)
[ 2.484332] checking generic (80020000 1c20000) vs hw (80000000 10000000)
[ 2.484332] fb: switching to nouveaufb from EFI VGA
[ 2.484346] Console: switching to colour dummy device 80x25
[ 2.484509] nouveau 0000:01:00.0: NVIDIA GK107 (0e7290a2)
[ 2.538462] nouveau 0000:01:00.0: bios: version 80.07.c7.04.01
[ 2.539849] nouveau 0000:01:00.0: fb: 2048 MiB GDDR5
[ 2.576037] iTCO_vendor_support: vendor-support=0
[ 2.577118] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[ 2.577203] iTCO_wdt: unable to reset NO_REBOOT flag, device disabled by hardware/BIOS
[ 2.606595] usb 1-8.3: new full-speed USB device number 6 using xhci_hcd
[ 2.606775] wl 0000:03:00.0 wlp3s0: renamed from wlan0
[ 2.614503] [TTM] Zone kernel: Available graphics memory: 8202644 kiB
[ 2.614505] [TTM] Zone dma32: Available graphics memory: 2097152 kiB
[ 2.614505] [TTM] Initializing pool allocator
[ 2.614509] [TTM] Initializing DMA pool allocator
[ 2.614531] nouveau 0000:01:00.0: DRM: VRAM: 2048 MiB
[ 2.614533] nouveau 0000:01:00.0: DRM: GART: 1048576 MiB
[ 2.614536] nouveau 0000:01:00.0: DRM: TMDS table version 2.0
[ 2.614537] nouveau 0000:01:00.0: DRM: DCB version 4.0
[ 2.614539] nouveau 0000:01:00.0: DRM: DCB outp 00: 04810fb6 0f230010
[ 2.614541] nouveau 0000:01:00.0: DRM: DCB outp 01: 01821fd6 0f420020
[ 2.614542] nouveau 0000:01:00.0: DRM: DCB outp 02: 01021f12 00020020
[ 2.614543] nouveau 0000:01:00.0: DRM: DCB outp 03: 08832fc6 0f420010
[ 2.614544] nouveau 0000:01:00.0: DRM: DCB outp 04: 08032f02 00020010
[ 2.614546] nouveau 0000:01:00.0: DRM: DCB outp 05: 02843f62 00020010
[ 2.614547] nouveau 0000:01:00.0: DRM: DCB conn 00: 00020047
[ 2.614548] nouveau 0000:01:00.0: DRM: DCB conn 01: 02208146
[ 2.614549] nouveau 0000:01:00.0: DRM: DCB conn 02: 01104246
[ 2.614550] nouveau 0000:01:00.0: DRM: DCB conn 03: 00410361
[ 2.674717] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 2.674719] [drm] Driver supports precise vblank timestamp query.
[ 2.674722] nouveau 0000:01:00.0: DRM: Apple GMUX detected: not registering Nouveau backlight interface
[ 2.692082] scsi 1:0:0:0: Direct-Access APPLE SD Card Reader 3.00 PQ: 0 ANSI: 6
[ 2.693068] sd 1:0:0:0: [sdb] Attached SCSI removable disk
[ 2.716660] clocksource: Switched to clocksource tsc
[ 2.860620] nouveau 0000:01:00.0: DRM: MM: using COPY for buffer copies
[ 2.931731] nouveau 0000:01:00.0: DRM: allocated 2880x1800 fb: 0x60000, bo ffff885ae9f12800
[ 2.933351] fbcon: nouveaufb (fb0) is primary device
[ 2.994922] nf_conntrack version 0.5.0 (65536 buckets, 262144 max)
[ 3.010346] input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input9
[ 3.010390] input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input10
[ 3.010428] input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input11
[ 3.301585] input: bcm5974 as /devices/pci0000:00/0000:00:14.0/usb1/1-12/1-12:1.2/input/input12
[ 3.301644] usbcore: registered new interface driver bcm5974
[ 3.303186] hidraw: raw HID events driver (C) Jiri Kosina
[ 3.312634] usbcore: registered new interface driver usbhid
[ 3.312635] usbhid: USB HID core driver
[ 3.314850] input: Apple Inc. Apple Internal Keyboard / Trackpad as /devices/pci0000:00/0000:00:14.0/usb1/1-12/1-12:1.0/0003:05AC:0263.0001/input/input13
[ 3.370009] apple 0003:05AC:0263.0001: input,hidraw0: USB HID v1.11 Keyboard [Apple Inc. Apple Internal Keyboard / Trackpad] on usb-0000:00:14.0-12/input0
[ 3.370047] mousedev: PS/2 mouse device common for all mice
[ 3.370070] apple 0003:05AC:0263.0002: hidraw1: USB HID v1.11 Device [Apple Inc. Apple Internal Keyboard / Trackpad] on usb-0000:00:14.0-12/input1
[ 3.396940] Console: switching to colour frame buffer device 360x112
[ 3.436313] nouveau 0000:01:00.0: fb0: nouveaufb frame buffer device
[ 3.449943] [drm] Initialized nouveau 1.3.1 20120801 for 0000:01:00.0 on minor 0
[ 3.654853] acpi_call: Cannot get handle: Error: AE_NOT_FOUND
[ 3.679947] acpi_call: Cannot get handle: Error: AE_NOT_FOUND
[ 3.811550] input: HID 05ac:820a as /devices/pci0000:00/0000:00:14.0/usb1/1-8/1-8.1/1-8.1:1.0/0003:05AC:820A.0003/input/input14
[ 3.834390] Bluetooth: Core ver 2.22
[ 3.834403] NET: Registered protocol family 31
[ 3.834404] Bluetooth: HCI device and connection manager initialized
[ 3.834406] Bluetooth: HCI socket layer initialized
[ 3.834408] Bluetooth: L2CAP socket layer initialized
[ 3.834411] Bluetooth: SCO socket layer initialized
[ 3.838987] usbcore: registered new interface driver btusb
[ 3.855355] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 3.855356] Bluetooth: BNEP filters: protocol multicast
[ 3.855358] Bluetooth: BNEP socket layer initialized
[ 3.861947] usb 1-8.1: USB disconnect, device number 4
[ 3.866934] hid-generic 0003:05AC:820A.0003: input,hidraw2: USB HID v1.11 Keyboard [HID 05ac:820a] on usb-0000:00:14.0-8.1/input0
[ 3.867069] input: HID 05ac:820b as /devices/pci0000:00/0000:00:14.0/usb1/1-8/1-8.2/1-8.2:1.0/0003:05AC:820B.0004/input/input15
[ 3.947814] Bluetooth: hci0: BCM: chip id 73 build 1068
[ 3.948759] Bluetooth: hci0: BCM: product 05ac:8289
[ 3.949770] Bluetooth: hci0: BCM: features 0x07
[ 3.965944] Bluetooth: hci0: BCM20702B0 Generic USB Class 1 @ 20 MHz
[ 4.000355] hid-generic 0003:05AC:820B.0004: input,hidraw2: USB HID v1.11 Mouse [HID 05ac:820b] on usb-0000:00:14.0-8.2/input0
[ 4.147157] usb 1-8.2: USB disconnect, device number 5
[ 6.853857] random: crng init done
[ 19.083771] fuse init (API version 7.26)
[ 32.883781] pcieport 0000:00:1c.3: Enabling MPC IRBNCE
[ 32.883786] pcieport 0000:00:1c.3: Intel PCH root port ACS workaround enabled
[ 32.950511] PM: suspend entry (deep)
[ 32.950512] PM: Syncing filesystems ... done.
[ 32.994179] Freezing user space processes ... (elapsed 0.001 seconds) done.
[ 32.995308] OOM killer disabled.
[ 32.995309] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
[ 32.996410] Suspending console(s) (use no_console_suspend to debug)
[ 32.996659] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[ 33.000852] sd 0:0:0:0: [sda] Stopping disk
[ 34.745380] thunderbolt 0000:08:00.0: suspending...
[ 34.746086] thunderbolt 0000:08:00.0: suspend finished
[ 34.746088] thunderbolt 0000:08:00.0: stopping RX ring 0
[ 34.746094] thunderbolt 0000:08:00.0: disabling interrupt at register 0x38200 bit 12 (0x1001 -> 0x1)
[ 34.746101] thunderbolt 0000:08:00.0: stopping TX ring 0
[ 34.746105] thunderbolt 0000:08:00.0: disabling interrupt at register 0x38200 bit 0 (0x1 -> 0x0)
[ 34.746109] thunderbolt 0000:08:00.0: control channel stopped
[ 35.697591] ACPI: Preparing to enter system sleep state S3
[ 35.721390] ACPI: EC: event blocked
[ 35.721391] ACPI: EC: EC stopped
[ 35.721391] PM: Saving platform NVS memory
[ 35.721396] Disabling non-boot CPUs ...
[ 35.721432] ACPI Exception: AE_BAD_PARAMETER, Returned by Handler for [EmbeddedControl] (20170728/evregion-300)
[ 35.721438] ACPI Error: Method parse/execution failed \_SB.PCI0.LPCB.ALS0._ALI, AE_BAD_PARAMETER (20170728/psparse-550)
[ 35.721446] ACPI Exception: AE_BAD_PARAMETER, Error reading ALS _ALI (20170728/acpi-als-107)
[ 35.749496] smpboot: CPU 1 is now offline
[ 35.769607] smpboot: CPU 2 is now offline
[ 35.803712] smpboot: CPU 3 is now offline
[ 35.832788] smpboot: CPU 4 is now offline
[ 35.869428] smpboot: CPU 5 is now offline
[ 35.909540] smpboot: CPU 6 is now offline
[ 35.929635] smpboot: CPU 7 is now offline
[ 35.960399] ACPI: Low-level resume complete
[ 35.960459] ACPI: EC: EC started
[ 35.960460] PM: Restoring platform NVS memory
[ 35.963040] Enabling non-boot CPUs ...
[ 35.963092] x86: Booting SMP configuration:
[ 35.963093] smpboot: Booting Node 0 Processor 1 APIC 0x2
[ 36.045206] cache: parent cpu1 should not be sleeping
[ 36.227765] CPU1 is up
[ 36.227806] smpboot: Booting Node 0 Processor 2 APIC 0x4
[ 36.301275] cache: parent cpu2 should not be sleeping
[ 36.474534] CPU2 is up
[ 36.474579] smpboot: Booting Node 0 Processor 3 APIC 0x6
[ 36.541371] cache: parent cpu3 should not be sleeping
[ 36.708961] CPU3 is up
[ 36.709008] smpboot: Booting Node 0 Processor 4 APIC 0x1
[ 36.715381] cache: parent cpu4 should not be sleeping
[ 36.715562] CPU4 is up
[ 36.715584] smpboot: Booting Node 0 Processor 5 APIC 0x3
[ 36.780530] cache: parent cpu5 should not be sleeping
[ 36.968840] CPU5 is up
[ 36.968870] smpboot: Booting Node 0 Processor 6 APIC 0x5
[ 37.038328] cache: parent cpu6 should not be sleeping
[ 37.256064] CPU6 is up
[ 37.256089] smpboot: Booting Node 0 Processor 7 APIC 0x7
[ 37.329585] cache: parent cpu7 should not be sleeping
[ 37.575418] CPU7 is up
[ 37.653544] ACPI: Waking up from system sleep state S3
[ 37.713262] pcieport 0000:00:1c.0: Enabling MPC IRBNCE
[ 37.713265] pcieport 0000:00:1c.0: Intel PCH root port ACS workaround enabled
[ 37.713448] pcieport 0000:07:03.0: quirk: waiting for thunderbolt to reestablish PCI tunnels...
[ 37.713600] pcieport 0000:07:04.0: quirk: waiting for thunderbolt to reestablish PCI tunnels...
[ 37.713622] pcieport 0000:07:05.0: quirk: waiting for thunderbolt to reestablish PCI tunnels...
[ 37.713624] pcieport 0000:07:06.0: quirk: waiting for thunderbolt to reestablish PCI tunnels...
[ 37.729592] pcieport 0000:00:1c.2: Enabling MPC IRBNCE
[ 37.729593] pcieport 0000:00:1c.3: Enabling MPC IRBNCE
[ 37.729595] pcieport 0000:00:1c.2: Intel PCH root port ACS workaround enabled
[ 37.729596] pcieport 0000:00:1c.3: Intel PCH root port ACS workaround enabled
[ 37.729656] thunderbolt 0000:08:00.0: control channel starting...
[ 37.729658] thunderbolt 0000:08:00.0: starting TX ring 0
[ 37.729669] thunderbolt 0000:08:00.0: enabling interrupt at register 0x38200 bit 0 (0x0 -> 0x1)
[ 37.729670] thunderbolt 0000:08:00.0: starting RX ring 0
[ 37.729681] thunderbolt 0000:08:00.0: enabling interrupt at register 0x38200 bit 12 (0x1 -> 0x1001)
[ 37.729683] thunderbolt 0000:08:00.0: resuming...
[ 37.729684] thunderbolt 0000:08:00.0: resetting switch at 0
[ 37.737885] thunderbolt 0000:08:00.0: 0: resuming switch
[ 37.738380] thunderbolt 0000:08:00.0: resume finished
[ 37.789538] pcieport 0000:00:1c.4: Enabling MPC IRBNCE
[ 37.789541] pcieport 0000:00:1c.4: Intel PCH root port ACS workaround enabled
[ 37.790259] usb usb1: root hub lost power or was reset
[ 37.790261] usb usb2: root hub lost power or was reset
[ 37.790310] ACPI: EC: event unblocked
[ 37.790367] ACPI: button: The lid device is not compliant to SW_LID.
[ 37.800460] sd 0:0:0:0: [sda] Starting disk
[ 37.831095] thunderbolt 0000:08:00.0: resetting error on 0:b.
[ 37.831102] thunderbolt 0000:08:00.0: 0:b: hotplug: scanning
[ 37.831103] thunderbolt 0000:08:00.0: 0:b: hotplug: no switch found
[ 37.831104] thunderbolt 0000:08:00.0: resetting error on 0:c.
[ 37.831106] thunderbolt 0000:08:00.0: 0:c: hotplug: scanning
[ 37.831107] thunderbolt 0000:08:00.0: 0:c: hotplug: no switch found
[ 37.896109] pciehp 0000:07:00.0:pcie204: Device 0000:08:00.0 already exists at 0000:08:00, cannot hot-add
[ 37.896110] pciehp 0000:07:00.0:pcie204: Cannot add device at 0000:08:00
[ 38.002847] usb 2-4: Disable of device-initiated U1 failed.
[ 38.002854] usb 2-4: Disable of device-initiated U2 failed.
[ 38.002856] usb 2-4: usb_reset_and_verify_device Failed to disable LTM
.
[ 38.002860] xhci_hcd 0000:00:14.0: Cannot set link state.
[ 38.002862] usb usb2-port4: cannot disable (err = -32)
[ 38.002874] xhci_hcd 0000:00:14.0: Cannot set link state.
[ 38.002876] usb usb2-port4: cannot disable (err = -32)
[ 38.092681] nouveau 0000:01:00.0: devinit: 0x000066e5[0]: script needs OR link
[ 38.112316] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 38.112532] ata1.00: unexpected _GTF length (8)
[ 38.112880] ata1.00: unexpected _GTF length (8)
[ 38.112956] ata1.00: configured for UDMA/133
[ 38.139583] usb 1-12: reset full-speed USB device number 3 using xhci_hcd
[ 38.287501] xhci_hcd 0000:00:14.0: dma_pool_free buffer-512, ffff885ae724b000/fff41000 (bad dma)
[ 38.402996] usb 1-8: reset full-speed USB device number 2 using xhci_hcd
[ 38.829924] usb 1-8.3: reset full-speed USB device number 6 using xhci_hcd
[ 40.897344] pciehp 0000:00:1c.0:pcie004: link training error: status 0x1001
[ 40.897347] pciehp 0000:00:1c.0:pcie004: Failed to check link status
[ 40.897443] usb 1-8.3:1.0: rebind failed: -517
[ 40.897499] usb 1-12:1.2: rebind failed: -517
[ 40.897734] OOM killer enabled.
[ 40.897735] Restarting tasks ... done.
[ 40.898407] input: bcm5974 as /devices/pci0000:00/0000:00:14.0/usb1/1-12/1-12:1.2/input/input16
[ 40.951666] PM: suspend exit
[ 41.011431] Bluetooth: hci0: BCM: chip id 73 build 1068
[ 41.012422] Bluetooth: hci0: BCM: product 05ac:8289
[ 41.013423] Bluetooth: hci0: BCM: features 0x07
[ 41.029535] Bluetooth: hci0: BCM20702B0 Generic USB Class 1 @ 20 MHz
[ 44.735541] usb usb2-port4: Cannot enable. Maybe the USB cable is bad?
[ 44.735561] xhci_hcd 0000:00:14.0: Cannot set link state.
[ 44.735569] usb usb2-port4: cannot disable (err = -32)
[ 44.735575] usb 2-4: USB disconnect, device number 2
[ 48.812466] usb usb2-port4: Cannot enable. Maybe the USB cable is bad?
[ 48.812484] xhci_hcd 0000:00:14.0: Cannot set link state.
[ 48.812490] usb usb2-port4: cannot disable (err = -32)
[ 48.812522] xhci_hcd 0000:00:14.0: Cannot set link state.
[ 48.812532] usb usb2-port4: cannot disable (err = -32)
[ 52.852408] usb usb2-port4: Cannot enable. Maybe the USB cable is bad?
[ 52.852422] xhci_hcd 0000:00:14.0: Cannot set link state.
[ 52.852426] usb usb2-port4: cannot disable (err = -32)
[ 56.892409] usb usb2-port4: Cannot enable. Maybe the USB cable is bad?
[ 56.892424] xhci_hcd 0000:00:14.0: Cannot set link state.
[ 56.892427] usb usb2-port4: cannot disable (err = -32)
[ 59.279068] xhci_hcd 0000:00:14.0: Cannot set link state.
[ 59.279074] usb usb2-port4: cannot disable (err = -32)
Raw
lspci -vvv (after suspend)
00:00.0 Host bridge: Intel Corporation Crystal Well DRAM Controller (rev 08)
Subsystem: Apple Inc. Crystal Well DRAM Controller
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
00:01.0 PCI bridge: Intel Corporation Crystal Well PCI Express x16 Controller (rev 08) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 256 bytes
Interrupt: pin A routed to IRQ 16
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: 00001000-00001fff [size=4K]
Memory behind bridge: c0000000-c10fffff [size=17M]
Prefetchable memory behind bridge: 0000000080000000-0000000091ffffff [size=288M]
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
Kernel modules: shpchp
00:01.1 PCI bridge: Intel Corporation Crystal Well PCI Express x8 Controller (rev 08) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 256 bytes
Interrupt: pin A routed to IRQ 16
Bus: primary=00, secondary=06, subordinate=9c, sec-latency=0
I/O behind bridge: 00003000-00005fff [size=12K]
Memory behind bridge: c1f00000-cdffffff [size=193M]
Prefetchable memory behind bridge: 00000000ce000000-00000000d9ffffff [size=192M]
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
Kernel modules: shpchp
00:14.0 USB controller: Intel Corporation 8 Series/C220 Series Chipset Family USB xHCI (rev 05) (prog-if 30 [XHCI])
Subsystem: Intel Corporation 8 Series/C220 Series Chipset Family USB xHCI
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 33
Region 0: Memory at c1e00000 (64-bit, non-prefetchable) [size=64K]
Capabilities: <access denied>
Kernel driver in use: xhci_hcd
Kernel modules: xhci_pci
00:16.0 Communication controller: Intel Corporation 8 Series/C220 Series Chipset Family MEI Controller #1 (rev 04)
Subsystem: Intel Corporation 8 Series/C220 Series Chipset Family MEI Controller
Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx+
Interrupt: pin A routed to IRQ 16
Region 0: Memory at c1e19100 (64-bit, non-prefetchable) [size=16]
Capabilities: <access denied>
Kernel modules: mei_me
00:1b.0 Audio device: Intel Corporation 8 Series/C220 Series Chipset High Definition Audio Controller (rev 05)
Subsystem: Intel Corporation 8 Series/C220 Series Chipset High Definition Audio Controller
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 256 bytes
Interrupt: pin A routed to IRQ 34
Region 0: Memory at c1e14000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: snd_hda_intel
Kernel modules: snd_hda_intel
00:1c.0 PCI bridge: Intel Corporation 8 Series/C220 Series Chipset Family PCI Express Root Port #1 (rev d5) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 256 bytes
Interrupt: pin A routed to IRQ 26
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
I/O behind bridge: 00002000-00002fff [size=4K]
Memory behind bridge: 7fa00000-7fbfffff [size=2M]
Prefetchable memory behind bridge: 000000007fc00000-000000007fdfffff [size=2M]
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
Kernel modules: shpchp
00:1c.2 PCI bridge: Intel Corporation 8 Series/C220 Series Chipset Family PCI Express Root Port #3 (rev d5) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 256 bytes
Interrupt: pin C routed to IRQ 18
Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
I/O behind bridge: 0000f000-00000fff [empty]
Memory behind bridge: c1800000-c1afffff [size=3M]
Prefetchable memory behind bridge: 00000000fff00000-00000000000fffff [empty]
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
Kernel modules: shpchp
00:1c.3 PCI bridge: Intel Corporation 8 Series/C220 Series Chipset Family PCI Express Root Port #4 (rev d5) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 256 bytes
Interrupt: pin D routed to IRQ 19
Bus: primary=00, secondary=04, subordinate=04, sec-latency=0
I/O behind bridge: 0000f000-00000fff [empty]
Memory behind bridge: c1c00000-c1dfffff [size=2M]
Prefetchable memory behind bridge: 00000000a0000000-00000000afffffff [size=256M]
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
Kernel modules: shpchp
00:1c.4 PCI bridge: Intel Corporation 8 Series/C220 Series Chipset Family PCI Express Root Port #5 (rev d5) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 256 bytes
Interrupt: pin A routed to IRQ 16
Bus: primary=00, secondary=05, subordinate=05, sec-latency=0
I/O behind bridge: 0000f000-00000fff [empty]
Memory behind bridge: c1b00000-c1bfffff [size=1M]
Prefetchable memory behind bridge: 00000000fff00000-00000000000fffff [empty]
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
Kernel modules: shpchp
00:1f.0 ISA bridge: Intel Corporation HM87 Express LPC Controller (rev 05)
Subsystem: Intel Corporation HM87 Express LPC Controller
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
Kernel driver in use: lpc_ich
Kernel modules: lpc_ich
00:1f.3 SMBus: Intel Corporation 8 Series/C220 Series Chipset Family SMBus Controller (rev 05)
Subsystem: Intel Corporation 8 Series/C220 Series Chipset Family SMBus Controller
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin C routed to IRQ 18
Region 0: Memory at c1e19000 (64-bit, non-prefetchable) [size=256]
Region 4: I/O ports at efa0 [size=32]
Kernel driver in use: i801_smbus
Kernel modules: i2c_i801
01:00.0 VGA compatible controller: NVIDIA Corporation GK107M [GeForce GT 750M Mac Edition] (rev a1) (prog-if 00 [VGA controller])
Subsystem: Apple Inc. GK107M [GeForce GT 750M Mac Edition]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 256 bytes
Interrupt: pin A routed to IRQ 51
Region 0: Memory at c0000000 (32-bit, non-prefetchable) [size=16M]
Region 1: Memory at 80000000 (64-bit, prefetchable) [size=256M]
Region 3: Memory at 90000000 (64-bit, prefetchable) [size=32M]
Region 5: I/O ports at 1000 [size=128]
Expansion ROM at c1000000 [disabled] [size=512K]
Capabilities: <access denied>
Kernel driver in use: nouveau
Kernel modules: nouveau
01:00.1 Audio device: NVIDIA Corporation GK107 HDMI Audio Controller (rev a1)
Subsystem: Apple Inc. GK107 HDMI Audio Controller
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 256 bytes
Interrupt: pin B routed to IRQ 17
Region 0: Memory at c1080000 (32-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: snd_hda_intel
Kernel modules: snd_hda_intel
03:00.0 Network controller: Broadcom Limited BCM4360 802.11ac Wireless Network Adapter (rev 03)
Subsystem: Apple Inc. BCM4360 802.11ac Wireless Network Adapter
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 256 bytes
Interrupt: pin A routed to IRQ 18
Region 0: Memory at c1a00000 (64-bit, non-prefetchable) [size=32K]
Region 2: Memory at c1800000 (64-bit, non-prefetchable) [size=2M]
Capabilities: <access denied>
Kernel driver in use: wl
Kernel modules: bcma, wl
04:00.0 Multimedia controller: Broadcom Limited 720p FaceTime HD Camera
Subsystem: Broadcom Limited 720p FaceTime HD Camera
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 256 bytes
Interrupt: pin A routed to IRQ 0
Region 0: Memory at c1d00000 (64-bit, non-prefetchable) [size=64K]
Region 2: Memory at a0000000 (64-bit, prefetchable) [size=256M]
Region 4: Memory at c1c00000 (64-bit, non-prefetchable) [size=1M]
Capabilities: <access denied>
05:00.0 SATA controller: Samsung Electronics Co Ltd Apple PCIe SSD (rev 01) (prog-if 01 [AHCI 1.0])
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 256 bytes
Interrupt: pin A routed to IRQ 16
Region 5: Memory at c1b00000 (32-bit, non-prefetchable) [size=8K]
Expansion ROM at c1b10000 [disabled] [size=64K]
Capabilities: <access denied>
Kernel driver in use: ahci
Kernel modules: ahci
06:00.0 PCI bridge: Intel Corporation DSL5520 Thunderbolt 2 Bridge [Falcon Ridge 4C 2013] (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 256 bytes
Interrupt: pin A routed to IRQ 27
Bus: primary=06, secondary=07, subordinate=6c, sec-latency=0
I/O behind bridge: 00003000-00004fff [size=8K]
Memory behind bridge: c1f00000-c9ffffff [size=129M]
Prefetchable memory behind bridge: 00000000ce000000-00000000d5ffffff [size=128M]
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
Kernel modules: shpchp
07:00.0 PCI bridge: Intel Corporation DSL5520 Thunderbolt 2 Bridge [Falcon Ridge 4C 2013] (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 256 bytes
Interrupt: pin A routed to IRQ 28
Bus: primary=07, secondary=08, subordinate=08, sec-latency=0
I/O behind bridge: 0000f000-00000fff [empty]
Memory behind bridge: c1f00000-c1ffffff [size=1M]
Prefetchable memory behind bridge: 00000000fff00000-00000000000fffff [empty]
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
Kernel modules: shpchp
07:03.0 PCI bridge: Intel Corporation DSL5520 Thunderbolt 2 Bridge [Falcon Ridge 4C 2013] (prog-if 00 [Normal decode])
Physical Slot: 2
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 256 bytes
Interrupt: pin A routed to IRQ 29
Bus: primary=07, secondary=09, subordinate=39, sec-latency=0
I/O behind bridge: 00003000-00003fff [size=4K]
Memory behind bridge: c2000000-c5ffffff [size=64M]
Prefetchable memory behind bridge: 00000000ce000000-00000000d1ffffff [size=64M]
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
Kernel modules: shpchp
07:04.0 PCI bridge: Intel Corporation DSL5520 Thunderbolt 2 Bridge [Falcon Ridge 4C 2013] (prog-if 00 [Normal decode])
Physical Slot: 3
Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 256 bytes
Interrupt: pin A routed to IRQ 30
Bus: primary=07, secondary=3a, subordinate=3a, sec-latency=0
I/O behind bridge: 0000f000-00000fff [empty]
Memory behind bridge: fff00000-000fffff [empty]
Prefetchable memory behind bridge: 00000000fff00000-00000000000fffff [empty]
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
Kernel modules: shpchp
07:05.0 PCI bridge: Intel Corporation DSL5520 Thunderbolt 2 Bridge [Falcon Ridge 4C 2013] (prog-if 00 [Normal decode])
Physical Slot: 4
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 256 bytes
Interrupt: pin A routed to IRQ 31
Bus: primary=07, secondary=3b, subordinate=6b, sec-latency=0
I/O behind bridge: 00004000-00004fff [size=4K]
Memory behind bridge: c6000000-c9ffffff [size=64M]
Prefetchable memory behind bridge: 00000000d2000000-00000000d5ffffff [size=64M]
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
Kernel modules: shpchp
07:06.0 PCI bridge: Intel Corporation DSL5520 Thunderbolt 2 Bridge [Falcon Ridge 4C 2013] (prog-if 00 [Normal decode])
Physical Slot: 5
Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 256 bytes
Interrupt: pin A routed to IRQ 32
Bus: primary=07, secondary=6c, subordinate=6c, sec-latency=0
I/O behind bridge: 0000f000-00000fff [empty]
Memory behind bridge: fff00000-000fffff [empty]
Prefetchable memory behind bridge: 00000000fff00000-00000000000fffff [empty]
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
Kernel modules: shpchp
08:00.0 System peripheral: Intel Corporation DSL5520 Thunderbolt 2 NHI [Falcon Ridge 4C 2013]
Subsystem: Device 2222:1111
Physical Slot: 0-1
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 256 bytes
Interrupt: pin A routed to IRQ 17
Region 0: Memory at c1f00000 (32-bit, non-prefetchable) [size=256K]
Region 1: Memory at c1f40000 (32-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
Kernel driver in use: thunderbolt
Kernel modules: thunderbolt
Raw
lspci -vvv (before suspend)
00:00.0 Host bridge: Intel Corporation Crystal Well DRAM Controller (rev 08)
Subsystem: Apple Inc. Crystal Well DRAM Controller
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
00:01.0 PCI bridge: Intel Corporation Crystal Well PCI Express x16 Controller (rev 08) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 256 bytes
Interrupt: pin A routed to IRQ 16
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: 00001000-00001fff [size=4K]
Memory behind bridge: c0000000-c10fffff [size=17M]
Prefetchable memory behind bridge: 0000000080000000-0000000091ffffff [size=288M]
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
Kernel modules: shpchp
00:01.1 PCI bridge: Intel Corporation Crystal Well PCI Express x8 Controller (rev 08) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 256 bytes
Interrupt: pin A routed to IRQ 16
Bus: primary=00, secondary=06, subordinate=9c, sec-latency=0
I/O behind bridge: 00003000-00005fff [size=12K]
Memory behind bridge: c1f00000-cdffffff [size=193M]
Prefetchable memory behind bridge: 00000000ce000000-00000000d9ffffff [size=192M]
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
Kernel modules: shpchp
00:14.0 USB controller: Intel Corporation 8 Series/C220 Series Chipset Family USB xHCI (rev 05) (prog-if 30 [XHCI])
Subsystem: Intel Corporation 8 Series/C220 Series Chipset Family USB xHCI
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 33
Region 0: Memory at c1e00000 (64-bit, non-prefetchable) [size=64K]
Capabilities: <access denied>
Kernel driver in use: xhci_hcd
Kernel modules: xhci_pci
00:16.0 Communication controller: Intel Corporation 8 Series/C220 Series Chipset Family MEI Controller #1 (rev 04)
Subsystem: Intel Corporation 8 Series/C220 Series Chipset Family MEI Controller
Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin A routed to IRQ 16
Region 0: Memory at c1e19100 (64-bit, non-prefetchable) [size=16]
Capabilities: <access denied>
Kernel modules: mei_me
00:1b.0 Audio device: Intel Corporation 8 Series/C220 Series Chipset High Definition Audio Controller (rev 05)
Subsystem: Intel Corporation 8 Series/C220 Series Chipset High Definition Audio Controller
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 256 bytes
Interrupt: pin A routed to IRQ 34
Region 0: Memory at c1e14000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: snd_hda_intel
Kernel modules: snd_hda_intel
00:1c.0 PCI bridge: Intel Corporation 8 Series/C220 Series Chipset Family PCI Express Root Port #1 (rev d5) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 256 bytes
Interrupt: pin A routed to IRQ 26
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
I/O behind bridge: 00002000-00002fff [size=4K]
Memory behind bridge: 7fa00000-7fbfffff [size=2M]
Prefetchable memory behind bridge: 000000007fc00000-000000007fdfffff [size=2M]
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
Kernel modules: shpchp
00:1c.2 PCI bridge: Intel Corporation 8 Series/C220 Series Chipset Family PCI Express Root Port #3 (rev d5) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 256 bytes
Interrupt: pin C routed to IRQ 18
Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
I/O behind bridge: 0000f000-00000fff [empty]
Memory behind bridge: c1800000-c1afffff [size=3M]
Prefetchable memory behind bridge: 00000000fff00000-00000000000fffff [empty]
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
Kernel modules: shpchp
00:1c.3 PCI bridge: Intel Corporation 8 Series/C220 Series Chipset Family PCI Express Root Port #4 (rev d5) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 256 bytes
Interrupt: pin D routed to IRQ 19
Bus: primary=00, secondary=04, subordinate=04, sec-latency=0
I/O behind bridge: 0000f000-00000fff [empty]
Memory behind bridge: c1c00000-c1dfffff [size=2M]
Prefetchable memory behind bridge: 00000000a0000000-00000000afffffff [size=256M]
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
Kernel modules: shpchp
00:1c.4 PCI bridge: Intel Corporation 8 Series/C220 Series Chipset Family PCI Express Root Port #5 (rev d5) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 256 bytes
Interrupt: pin A routed to IRQ 16
Bus: primary=00, secondary=05, subordinate=05, sec-latency=0
I/O behind bridge: 0000f000-00000fff [empty]
Memory behind bridge: c1b00000-c1bfffff [size=1M]
Prefetchable memory behind bridge: 00000000fff00000-00000000000fffff [empty]
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
Kernel modules: shpchp
00:1f.0 ISA bridge: Intel Corporation HM87 Express LPC Controller (rev 05)
Subsystem: Intel Corporation HM87 Express LPC Controller
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
Kernel driver in use: lpc_ich
Kernel modules: lpc_ich
00:1f.3 SMBus: Intel Corporation 8 Series/C220 Series Chipset Family SMBus Controller (rev 05)
Subsystem: Intel Corporation 8 Series/C220 Series Chipset Family SMBus Controller
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin C routed to IRQ 18
Region 0: Memory at c1e19000 (64-bit, non-prefetchable) [size=256]
Region 4: I/O ports at efa0 [size=32]
Kernel driver in use: i801_smbus
Kernel modules: i2c_i801
01:00.0 VGA compatible controller: NVIDIA Corporation GK107M [GeForce GT 750M Mac Edition] (rev a1) (prog-if 00 [VGA controller])
Subsystem: Apple Inc. GK107M [GeForce GT 750M Mac Edition]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 256 bytes
Interrupt: pin A routed to IRQ 51
Region 0: Memory at c0000000 (32-bit, non-prefetchable) [size=16M]
Region 1: Memory at 80000000 (64-bit, prefetchable) [size=256M]
Region 3: Memory at 90000000 (64-bit, prefetchable) [size=32M]
Region 5: I/O ports at 1000 [size=128]
Expansion ROM at c1000000 [disabled] [size=512K]
Capabilities: <access denied>
Kernel driver in use: nouveau
Kernel modules: nouveau
01:00.1 Audio device: NVIDIA Corporation GK107 HDMI Audio Controller (rev a1)
Subsystem: Apple Inc. GK107 HDMI Audio Controller
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 256 bytes
Interrupt: pin B routed to IRQ 17
Region 0: Memory at c1080000 (32-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: snd_hda_intel
Kernel modules: snd_hda_intel
03:00.0 Network controller: Broadcom Limited BCM4360 802.11ac Wireless Network Adapter (rev 03)
Subsystem: Apple Inc. BCM4360 802.11ac Wireless Network Adapter
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort+ <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 256 bytes
Interrupt: pin A routed to IRQ 18
Region 0: Memory at c1a00000 (64-bit, non-prefetchable) [size=32K]
Region 2: Memory at c1800000 (64-bit, non-prefetchable) [size=2M]
Capabilities: <access denied>
Kernel driver in use: wl
Kernel modules: bcma, wl
04:00.0 Multimedia controller: Broadcom Limited 720p FaceTime HD Camera
Subsystem: Broadcom Limited 720p FaceTime HD Camera
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 256 bytes
Interrupt: pin A routed to IRQ 0
Region 0: Memory at c1d00000 (64-bit, non-prefetchable) [size=64K]
Region 2: Memory at a0000000 (64-bit, prefetchable) [size=256M]
Region 4: Memory at c1c00000 (64-bit, non-prefetchable) [size=1M]
Capabilities: <access denied>
05:00.0 SATA controller: Samsung Electronics Co Ltd Apple PCIe SSD (rev 01) (prog-if 01 [AHCI 1.0])
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 256 bytes
Interrupt: pin A routed to IRQ 16
Region 5: Memory at c1b00000 (32-bit, non-prefetchable) [size=8K]
Expansion ROM at c1b10000 [disabled] [size=64K]
Capabilities: <access denied>
Kernel driver in use: ahci
Kernel modules: ahci
06:00.0 PCI bridge: Intel Corporation DSL5520 Thunderbolt 2 Bridge [Falcon Ridge 4C 2013] (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 256 bytes
Interrupt: pin A routed to IRQ 27
Bus: primary=06, secondary=07, subordinate=6c, sec-latency=0
I/O behind bridge: 00003000-00004fff [size=8K]
Memory behind bridge: c1f00000-c9ffffff [size=129M]
Prefetchable memory behind bridge: 00000000ce000000-00000000d5ffffff [size=128M]
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
Kernel modules: shpchp
07:00.0 PCI bridge: Intel Corporation DSL5520 Thunderbolt 2 Bridge [Falcon Ridge 4C 2013] (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 256 bytes
Interrupt: pin A routed to IRQ 28
Bus: primary=07, secondary=08, subordinate=08, sec-latency=0
I/O behind bridge: 0000f000-00000fff [empty]
Memory behind bridge: c1f00000-c1ffffff [size=1M]
Prefetchable memory behind bridge: 00000000fff00000-00000000000fffff [empty]
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
Kernel modules: shpchp
07:03.0 PCI bridge: Intel Corporation DSL5520 Thunderbolt 2 Bridge [Falcon Ridge 4C 2013] (prog-if 00 [Normal decode])
Physical Slot: 2
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 256 bytes
Interrupt: pin A routed to IRQ 29
Bus: primary=07, secondary=09, subordinate=39, sec-latency=0
I/O behind bridge: 00003000-00003fff [size=4K]
Memory behind bridge: c2000000-c5ffffff [size=64M]
Prefetchable memory behind bridge: 00000000ce000000-00000000d1ffffff [size=64M]
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
Kernel modules: shpchp
07:04.0 PCI bridge: Intel Corporation DSL5520 Thunderbolt 2 Bridge [Falcon Ridge 4C 2013] (prog-if 00 [Normal decode])
Physical Slot: 3
Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 256 bytes
Interrupt: pin A routed to IRQ 30
Bus: primary=07, secondary=3a, subordinate=3a, sec-latency=0
I/O behind bridge: 0000f000-00000fff [empty]
Memory behind bridge: fff00000-000fffff [empty]
Prefetchable memory behind bridge: 00000000fff00000-00000000000fffff [empty]
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
Kernel modules: shpchp
07:05.0 PCI bridge: Intel Corporation DSL5520 Thunderbolt 2 Bridge [Falcon Ridge 4C 2013] (prog-if 00 [Normal decode])
Physical Slot: 4
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 256 bytes
Interrupt: pin A routed to IRQ 31
Bus: primary=07, secondary=3b, subordinate=6b, sec-latency=0
I/O behind bridge: 00004000-00004fff [size=4K]
Memory behind bridge: c6000000-c9ffffff [size=64M]
Prefetchable memory behind bridge: 00000000d2000000-00000000d5ffffff [size=64M]
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
Kernel modules: shpchp
07:06.0 PCI bridge: Intel Corporation DSL5520 Thunderbolt 2 Bridge [Falcon Ridge 4C 2013] (prog-if 00 [Normal decode])
Physical Slot: 5
Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 256 bytes
Interrupt: pin A routed to IRQ 32
Bus: primary=07, secondary=6c, subordinate=6c, sec-latency=0
I/O behind bridge: 0000f000-00000fff [empty]
Memory behind bridge: fff00000-000fffff [empty]
Prefetchable memory behind bridge: 00000000fff00000-00000000000fffff [empty]
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
Kernel modules: shpchp
08:00.0 System peripheral: Intel Corporation DSL5520 Thunderbolt 2 NHI [Falcon Ridge 4C 2013]
Subsystem: Device 2222:1111
Physical Slot: 0-1
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 256 bytes
Interrupt: pin A routed to IRQ 17
Region 0: Memory at c1f00000 (32-bit, non-prefetchable) [size=256K]
Region 1: Memory at c1f40000 (32-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
Kernel driver in use: thunderbolt
Kernel modules: thunderbolt
Raw
lsusb -vvv (after suspend)
Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 3.00
bDeviceClass 9 Hub
bDeviceSubClass 0
bDeviceProtocol 3
bMaxPacketSize0 9
idVendor 0x1d6b Linux Foundation
idProduct 0x0003 3.0 root hub
bcdDevice 4.14
iManufacturer 3 (error)
iProduct 2 xHCI Host Controller
iSerial 1 (error)
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 31
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0xe0
Self Powered
Remote Wakeup
MaxPower 0mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 9 Hub
bInterfaceSubClass 0
bInterfaceProtocol 0 Full speed (or root) hub
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0004 1x 4 bytes
bInterval 12
bMaxBurst 0
Bus 001 Device 006: ID 05ac:8289 Apple, Inc.
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 2.00
bDeviceClass 255 Vendor Specific Class
bDeviceSubClass 1
bDeviceProtocol 1
bMaxPacketSize0 64
idVendor 0x05ac Apple, Inc.
idProduct 0x8289
bcdDevice 1.37
iManufacturer 1 Apple Inc.
iProduct 2 Bluetooth USB Host Controller
iSerial 0
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 216
bNumInterfaces 4
bConfigurationValue 1
iConfiguration 0
bmAttributes 0xe0
Self Powered
Remote Wakeup
MaxPower 0mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 3
bInterfaceClass 255 Vendor Specific Class
bInterfaceSubClass 1
bInterfaceProtocol 1
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0010 1x 16 bytes
bInterval 1
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x82 EP 2 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0040 1x 64 bytes
bInterval 1
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x02 EP 2 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0040 1x 64 bytes
bInterval 1
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 1
bAlternateSetting 0
bNumEndpoints 2
bInterfaceClass 224 Wireless
bInterfaceSubClass 1 Radio Frequency
bInterfaceProtocol 1 Bluetooth
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x83 EP 3 IN
bmAttributes 1
Transfer Type Isochronous
Synch Type None
Usage Type Data
wMaxPacketSize 0x0000 1x 0 bytes
bInterval 1
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x03 EP 3 OUT
bmAttributes 1
Transfer Type Isochronous
Synch Type None
Usage Type Data
wMaxPacketSize 0x0000 1x 0 bytes
bInterval 1
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 1
bAlternateSetting 1
bNumEndpoints 2
bInterfaceClass 224 Wireless
bInterfaceSubClass 1 Radio Frequency
bInterfaceProtocol 1 Bluetooth
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x83 EP 3 IN
bmAttributes 1
Transfer Type Isochronous
Synch Type None
Usage Type Data
wMaxPacketSize 0x0009 1x 9 bytes
bInterval 1
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x03 EP 3 OUT
bmAttributes 1
Transfer Type Isochronous
Synch Type None
Usage Type Data
wMaxPacketSize 0x0009 1x 9 bytes
bInterval 1
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 1
bAlternateSetting 2
bNumEndpoints 2
bInterfaceClass 224 Wireless
bInterfaceSubClass 1 Radio Frequency
bInterfaceProtocol 1 Bluetooth
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x83 EP 3 IN
bmAttributes 1
Transfer Type Isochronous
Synch Type None
Usage Type Data
wMaxPacketSize 0x0011 1x 17 bytes
bInterval 1
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x03 EP 3 OUT
bmAttributes 1
Transfer Type Isochronous
Synch Type None
Usage Type Data
wMaxPacketSize 0x0011 1x 17 bytes
bInterval 1
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 1
bAlternateSetting 3
bNumEndpoints 2
bInterfaceClass 224 Wireless
bInterfaceSubClass 1 Radio Frequency
bInterfaceProtocol 1 Bluetooth
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x83 EP 3 IN
bmAttributes 1
Transfer Type Isochronous
Synch Type None
Usage Type Data
wMaxPacketSize 0x0019 1x 25 bytes
bInterval 1
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x03 EP 3 OUT
bmAttributes 1
Transfer Type Isochronous
Synch Type None
Usage Type Data
wMaxPacketSize 0x0019 1x 25 bytes
bInterval 1
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 1
bAlternateSetting 4
bNumEndpoints 2
bInterfaceClass 224 Wireless
bInterfaceSubClass 1 Radio Frequency
bInterfaceProtocol 1 Bluetooth
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x83 EP 3 IN
bmAttributes 1
Transfer Type Isochronous
Synch Type None
Usage Type Data
wMaxPacketSize 0x0021 1x 33 bytes
bInterval 1
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x03 EP 3 OUT
bmAttributes 1
Transfer Type Isochronous
Synch Type None
Usage Type Data
wMaxPacketSize 0x0021 1x 33 bytes
bInterval 1
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 1
bAlternateSetting 5
bNumEndpoints 2
bInterfaceClass 224 Wireless
bInterfaceSubClass 1 Radio Frequency
bInterfaceProtocol 1 Bluetooth
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x83 EP 3 IN
bmAttributes 1
Transfer Type Isochronous
Synch Type None
Usage Type Data
wMaxPacketSize 0x0031 1x 49 bytes
bInterval 1
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x03 EP 3 OUT
bmAttributes 1
Transfer Type Isochronous
Synch Type None
Usage Type Data
wMaxPacketSize 0x0031 1x 49 bytes
bInterval 1
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 2
bAlternateSetting 0
bNumEndpoints 2
bInterfaceClass 255 Vendor Specific Class
bInterfaceSubClass 255 Vendor Specific Subclass
bInterfaceProtocol 255 Vendor Specific Protocol
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x84 EP 4 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0020 1x 32 bytes
bInterval 1
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x04 EP 4 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0020 1x 32 bytes
bInterval 1
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 3
bAlternateSetting 0
bNumEndpoints 0
bInterfaceClass 254 Application Specific Interface
bInterfaceSubClass 1 Device Firmware Update
bInterfaceProtocol 1
iInterface 0
Device Firmware Upgrade Interface Descriptor:
bLength 7
bDescriptorType 33
bmAttributes 7
Will Not Detach
Manifestation Tolerant
Upload Supported
Download Supported
wDetachTimeout 5000 milliseconds
wTransferSize 64 bytes
Device Status: 0x0001
Self Powered
Bus 001 Device 002: ID 0a5c:4500 Broadcom Corp. BCM2046B1 USB 2.0 Hub (part of BCM2046 Bluetooth)
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 2.00
bDeviceClass 9 Hub
bDeviceSubClass 0
bDeviceProtocol 0 Full speed (or root) hub
bMaxPacketSize0 8
idVendor 0x0a5c Broadcom Corp.
idProduct 0x4500 BCM2046B1 USB 2.0 Hub (part of BCM2046 Bluetooth)
bcdDevice 1.00
iManufacturer 1 Apple Inc.
iProduct 2 BRCM20702 Hub
iSerial 0
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 25
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0xe0
Self Powered
Remote Wakeup
MaxPower 94mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 9 Hub
bInterfaceSubClass 0
bInterfaceProtocol 0 Full speed (or root) hub
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0001 1x 1 bytes
bInterval 255
Hub Descriptor:
bLength 9
bDescriptorType 41
nNbrPorts 3
wHubCharacteristic 0x0004
Ganged power switching
Compound device
Ganged overcurrent protection
bPwrOn2PwrGood 50 * 2 milli seconds
bHubContrCurrent 100 milli Ampere
DeviceRemovable 0x0e
PortPwrCtrlMask 0xff
Hub Port Status:
Port 1: 0000.0100 power
Port 2: 0000.0100 power
Port 3: 0000.0103 power enable connect
Device Status: 0x0001
Self Powered
Bus 001 Device 003: ID 05ac:0263 Apple, Inc. Apple Internal Keyboard / Trackpad (MacBook Retina)
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 2.00
bDeviceClass 0
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 8
idVendor 0x05ac Apple, Inc.
idProduct 0x0263 Apple Internal Keyboard / Trackpad (MacBook Retina)
bcdDevice 2.25
iManufacturer 1 Apple Inc.
iProduct 2 Apple Internal Keyboard / Trackpad
iSerial 0
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 84
bNumInterfaces 3
bConfigurationValue 1
iConfiguration 0
bmAttributes 0xa0
(Bus Powered)
Remote Wakeup
MaxPower 40mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 3 Human Interface Device
bInterfaceSubClass 1 Boot Interface Subclass
bInterfaceProtocol 1 Keyboard
iInterface 3 Apple Internal Keyboard
HID Device Descriptor:
bLength 9
bDescriptorType 33
bcdHID 1.11
bCountryCode 13 International (ISO)
bNumDescriptors 1
bDescriptorType 34 Report
wDescriptorLength 156
Report Descriptors:
** UNAVAILABLE **
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x83 EP 3 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x000a 1x 10 bytes
bInterval 8
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 1
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 3 Human Interface Device
bInterfaceSubClass 0
bInterfaceProtocol 0
iInterface 4 Touchpad
HID Device Descriptor:
bLength 9
bDescriptorType 33
bcdHID 1.11
bCountryCode 0 Not supported
bNumDescriptors 1
bDescriptorType 34 Report
wDescriptorLength 27
Report Descriptors:
** UNAVAILABLE **
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0040 1x 64 bytes
bInterval 2
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 2
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 3 Human Interface Device
bInterfaceSubClass 1 Boot Interface Subclass
bInterfaceProtocol 2 Mouse
iInterface 4 Touchpad
HID Device Descriptor:
bLength 9
bDescriptorType 33
bcdHID 1.11
bCountryCode 0 Not supported
bNumDescriptors 1
bDescriptorType 34 Report
wDescriptorLength 52
Report Descriptors:
** UNAVAILABLE **
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x84 EP 4 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0008 1x 8 bytes
bInterval 8
Device Status: 0x0000
(Bus Powered)
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 2.00
bDeviceClass 9 Hub
bDeviceSubClass 0
bDeviceProtocol 1 Single TT
bMaxPacketSize0 64
idVendor 0x1d6b Linux Foundation
idProduct 0x0002 2.0 root hub
bcdDevice 4.14
iManufacturer 3 Linux 4.14.8-1-ARCH xhci-hcd
iProduct 2 xHCI Host Controller
iSerial 1 0000:00:14.0
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 25
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0xe0
Self Powered
Remote Wakeup
MaxPower 0mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 9 Hub
bInterfaceSubClass 0
bInterfaceProtocol 0 Full speed (or root) hub
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0004 1x 4 bytes
bInterval 12
Hub Descriptor:
bLength 11
bDescriptorType 41
nNbrPorts 14
wHubCharacteristic 0x000a
No power switching (usb 1.0)
Per-port overcurrent protection
TT think time 8 FS bits
bPwrOn2PwrGood 10 * 2 milli seconds
bHubContrCurrent 0 milli Ampere
DeviceRemovable 0x00 0x00
PortPwrCtrlMask 0xff 0xff
Hub Port Status:
Port 1: 0000.0100 power
Port 2: 0000.0100 power
Port 3: 0000.0100 power
Port 4: 0000.0100 power
Port 5: 0000.0100 power
Port 6: 0000.0100 power
Port 7: 0000.0100 power
Port 8: 0000.0103 power enable connect
Port 9: 0000.0100 power
Port 10: 0000.0100 power
Port 11: 0000.0100 power
Port 12: 0000.0103 power enable connect
Port 13: 0000.0100 power
Port 14: 0000.0100 power
Device Status: 0x0001
Self Powered
Raw
lsusb -vvv (before suspend)
Bus 002 Device 002: ID 05ac:8406 Apple, Inc.
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 3.00
bDeviceClass 0
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 9
idVendor 0x05ac Apple, Inc.
idProduct 0x8406
bcdDevice 8.20
iManufacturer 3 Apple
iProduct 4 Card Reader
iSerial 5 000000000820
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 44
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0xa0
(Bus Powered)
Remote Wakeup
MaxPower 896mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 2
bInterfaceClass 8 Mass Storage
bInterfaceSubClass 6 SCSI
bInterfaceProtocol 80 Bulk-Only
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0400 1x 1024 bytes
bInterval 0
bMaxBurst 4
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x02 EP 2 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0400 1x 1024 bytes
bInterval 0
bMaxBurst 4
Binary Object Store Descriptor:
bLength 5
bDescriptorType 15
wTotalLength 22
bNumDeviceCaps 2
USB 2.0 Extension Device Capability:
bLength 7
bDescriptorType 16
bDevCapabilityType 2
bmAttributes 0x00000002
HIRD Link Power Management (LPM) Supported
SuperSpeed USB Device Capability:
bLength 10
bDescriptorType 16
bDevCapabilityType 3
bmAttributes 0x02
Latency Tolerance Messages (LTM) Supported
wSpeedsSupported 0x000e
Device can operate at Full Speed (12Mbps)
Device can operate at High Speed (480Mbps)
Device can operate at SuperSpeed (5Gbps)
bFunctionalitySupport 1
Lowest fully-functional device speed is Full Speed (12Mbps)
bU1DevExitLat 10 micro seconds
bU2DevExitLat 2047 micro seconds
Device Status: 0x001c
(Bus Powered)
U1 Enabled
U2 Enabled
Latency Tolerance Messaging (LTM) Enabled
Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 3.00
bDeviceClass 9 Hub
bDeviceSubClass 0
bDeviceProtocol 3
bMaxPacketSize0 9
idVendor 0x1d6b Linux Foundation
idProduct 0x0003 3.0 root hub
bcdDevice 4.14
iManufacturer 3 Linux 4.14.8-1-ARCH xhci-hcd
iProduct 2 xHCI Host Controller
iSerial 1 0000:00:14.0
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 31
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0xe0
Self Powered
Remote Wakeup
MaxPower 0mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 9 Hub
bInterfaceSubClass 0
bInterfaceProtocol 0 Full speed (or root) hub
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0004 1x 4 bytes
bInterval 12
bMaxBurst 0
Hub Descriptor:
bLength 12
bDescriptorType 42
nNbrPorts 6
wHubCharacteristic 0x000a
No power switching (usb 1.0)
Per-port overcurrent protection
bPwrOn2PwrGood 10 * 2 milli seconds
bHubContrCurrent 0 milli Ampere
bHubDecLat 0.0 micro seconds
wHubDelay 0 nano seconds
DeviceRemovable 0x00
Hub Port Status:
Port 1: 0000.02a0 5Gbps power Rx.Detect
Port 2: 0000.02a0 5Gbps power Rx.Detect
Port 3: 0000.02a0 5Gbps power Rx.Detect
Port 4: 0000.0223 5Gbps power U1 enable connect
Port 5: 0000.02a0 5Gbps power Rx.Detect
Port 6: 0000.02a0 5Gbps power Rx.Detect
Binary Object Store Descriptor:
bLength 5
bDescriptorType 15
wTotalLength 15
bNumDeviceCaps 1
SuperSpeed USB Device Capability:
bLength 10
bDescriptorType 16
bDevCapabilityType 3
bmAttributes 0x02
Latency Tolerance Messages (LTM) Supported
wSpeedsSupported 0x0008
Device can operate at SuperSpeed (5Gbps)
bFunctionalitySupport 3
Lowest fully-functional device speed is SuperSpeed (5Gbps)
bU1DevExitLat 10 micro seconds
bU2DevExitLat 512 micro seconds
Device Status: 0x0001
Self Powered
Bus 001 Device 006: ID 05ac:8289 Apple, Inc.
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 2.00
bDeviceClass 255 Vendor Specific Class
bDeviceSubClass 1
bDeviceProtocol 1
bMaxPacketSize0 64
idVendor 0x05ac Apple, Inc.
idProduct 0x8289
bcdDevice 1.37
iManufacturer 1 Apple Inc.
iProduct 2 Bluetooth USB Host Controller
iSerial 0
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 216
bNumInterfaces 4
bConfigurationValue 1
iConfiguration 0
bmAttributes 0xe0
Self Powered
Remote Wakeup
MaxPower 0mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 3
bInterfaceClass 255 Vendor Specific Class
bInterfaceSubClass 1
bInterfaceProtocol 1
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0010 1x 16 bytes
bInterval 1
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x82 EP 2 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0040 1x 64 bytes
bInterval 1
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x02 EP 2 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0040 1x 64 bytes
bInterval 1
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 1
bAlternateSetting 0
bNumEndpoints 2
bInterfaceClass 224 Wireless
bInterfaceSubClass 1 Radio Frequency
bInterfaceProtocol 1 Bluetooth
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x83 EP 3 IN
bmAttributes 1
Transfer Type Isochronous
Synch Type None
Usage Type Data
wMaxPacketSize 0x0000 1x 0 bytes
bInterval 1
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x03 EP 3 OUT
bmAttributes 1
Transfer Type Isochronous
Synch Type None
Usage Type Data
wMaxPacketSize 0x0000 1x 0 bytes
bInterval 1
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 1
bAlternateSetting 1
bNumEndpoints 2
bInterfaceClass 224 Wireless
bInterfaceSubClass 1 Radio Frequency
bInterfaceProtocol 1 Bluetooth
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x83 EP 3 IN
bmAttributes 1
Transfer Type Isochronous
Synch Type None
Usage Type Data
wMaxPacketSize 0x0009 1x 9 bytes
bInterval 1
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x03 EP 3 OUT
bmAttributes 1
Transfer Type Isochronous
Synch Type None
Usage Type Data
wMaxPacketSize 0x0009 1x 9 bytes
bInterval 1
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 1
bAlternateSetting 2
bNumEndpoints 2
bInterfaceClass 224 Wireless
bInterfaceSubClass 1 Radio Frequency
bInterfaceProtocol 1 Bluetooth
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x83 EP 3 IN
bmAttributes 1
Transfer Type Isochronous
Synch Type None
Usage Type Data
wMaxPacketSize 0x0011 1x 17 bytes
bInterval 1
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x03 EP 3 OUT
bmAttributes 1
Transfer Type Isochronous
Synch Type None
Usage Type Data
wMaxPacketSize 0x0011 1x 17 bytes
bInterval 1
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 1
bAlternateSetting 3
bNumEndpoints 2
bInterfaceClass 224 Wireless
bInterfaceSubClass 1 Radio Frequency
bInterfaceProtocol 1 Bluetooth
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x83 EP 3 IN
bmAttributes 1
Transfer Type Isochronous
Synch Type None
Usage Type Data
wMaxPacketSize 0x0019 1x 25 bytes
bInterval 1
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x03 EP 3 OUT
bmAttributes 1
Transfer Type Isochronous
Synch Type None
Usage Type Data
wMaxPacketSize 0x0019 1x 25 bytes
bInterval 1
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 1
bAlternateSetting 4
bNumEndpoints 2
bInterfaceClass 224 Wireless
bInterfaceSubClass 1 Radio Frequency
bInterfaceProtocol 1 Bluetooth
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x83 EP 3 IN
bmAttributes 1
Transfer Type Isochronous
Synch Type None
Usage Type Data
wMaxPacketSize 0x0021 1x 33 bytes
bInterval 1
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x03 EP 3 OUT
bmAttributes 1
Transfer Type Isochronous
Synch Type None
Usage Type Data
wMaxPacketSize 0x0021 1x 33 bytes
bInterval 1
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 1
bAlternateSetting 5
bNumEndpoints 2
bInterfaceClass 224 Wireless
bInterfaceSubClass 1 Radio Frequency
bInterfaceProtocol 1 Bluetooth
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x83 EP 3 IN
bmAttributes 1
Transfer Type Isochronous
Synch Type None
Usage Type Data
wMaxPacketSize 0x0031 1x 49 bytes
bInterval 1
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x03 EP 3 OUT
bmAttributes 1
Transfer Type Isochronous
Synch Type None
Usage Type Data
wMaxPacketSize 0x0031 1x 49 bytes
bInterval 1
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 2
bAlternateSetting 0
bNumEndpoints 2
bInterfaceClass 255 Vendor Specific Class
bInterfaceSubClass 255 Vendor Specific Subclass
bInterfaceProtocol 255 Vendor Specific Protocol
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x84 EP 4 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0020 1x 32 bytes
bInterval 1
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x04 EP 4 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0020 1x 32 bytes
bInterval 1
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 3
bAlternateSetting 0
bNumEndpoints 0
bInterfaceClass 254 Application Specific Interface
bInterfaceSubClass 1 Device Firmware Update
bInterfaceProtocol 1
iInterface 0
Device Firmware Upgrade Interface Descriptor:
bLength 7
bDescriptorType 33
bmAttributes 7
Will Not Detach
Manifestation Tolerant
Upload Supported
Download Supported
wDetachTimeout 5000 milliseconds
wTransferSize 64 bytes
Device Status: 0x0001
Self Powered
Bus 001 Device 002: ID 0a5c:4500 Broadcom Corp. BCM2046B1 USB 2.0 Hub (part of BCM2046 Bluetooth)
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 2.00
bDeviceClass 9 Hub
bDeviceSubClass 0
bDeviceProtocol 0 Full speed (or root) hub
bMaxPacketSize0 8
idVendor 0x0a5c Broadcom Corp.
idProduct 0x4500 BCM2046B1 USB 2.0 Hub (part of BCM2046 Bluetooth)
bcdDevice 1.00
iManufacturer 1 Apple Inc.
iProduct 2 BRCM20702 Hub
iSerial 0
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 25
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0xe0
Self Powered
Remote Wakeup
MaxPower 94mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 9 Hub
bInterfaceSubClass 0
bInterfaceProtocol 0 Full speed (or root) hub
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0001 1x 1 bytes
bInterval 255
Hub Descriptor:
bLength 9
bDescriptorType 41
nNbrPorts 3
wHubCharacteristic 0x0004
Ganged power switching
Compound device
Ganged overcurrent protection
bPwrOn2PwrGood 50 * 2 milli seconds
bHubContrCurrent 100 milli Ampere
DeviceRemovable 0x0e
PortPwrCtrlMask 0xff
Hub Port Status:
Port 1: 0000.0100 power
Port 2: 0000.0100 power
Port 3: 0000.0103 power enable connect
Device Status: 0x0001
Self Powered
Bus 001 Device 003: ID 05ac:0263 Apple, Inc. Apple Internal Keyboard / Trackpad (MacBook Retina)
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 2.00
bDeviceClass 0
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 8
idVendor 0x05ac Apple, Inc.
idProduct 0x0263 Apple Internal Keyboard / Trackpad (MacBook Retina)
bcdDevice 2.25
iManufacturer 1 Apple Inc.
iProduct 2 Apple Internal Keyboard / Trackpad
iSerial 0
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 84
bNumInterfaces 3
bConfigurationValue 1
iConfiguration 0
bmAttributes 0xa0
(Bus Powered)
Remote Wakeup
MaxPower 40mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 3 Human Interface Device
bInterfaceSubClass 1 Boot Interface Subclass
bInterfaceProtocol 1 Keyboard
iInterface 3 Apple Internal Keyboard
HID Device Descriptor:
bLength 9
bDescriptorType 33
bcdHID 1.11
bCountryCode 13 International (ISO)
bNumDescriptors 1
bDescriptorType 34 Report
wDescriptorLength 156
Report Descriptors:
** UNAVAILABLE **
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x83 EP 3 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x000a 1x 10 bytes
bInterval 8
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 1
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 3 Human Interface Device
bInterfaceSubClass 0
bInterfaceProtocol 0
iInterface 4 Touchpad
HID Device Descriptor:
bLength 9
bDescriptorType 33
bcdHID 1.11
bCountryCode 0 Not supported
bNumDescriptors 1
bDescriptorType 34 Report
wDescriptorLength 27
Report Descriptors:
** UNAVAILABLE **
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0040 1x 64 bytes
bInterval 2
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 2
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 3 Human Interface Device
bInterfaceSubClass 1 Boot Interface Subclass
bInterfaceProtocol 2 Mouse
iInterface 4 Touchpad
HID Device Descriptor:
bLength 9
bDescriptorType 33
bcdHID 1.11
bCountryCode 0 Not supported
bNumDescriptors 1
bDescriptorType 34 Report
wDescriptorLength 52
Report Descriptors:
** UNAVAILABLE **
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x84 EP 4 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0008 1x 8 bytes
bInterval 8
Device Status: 0x0000
(Bus Powered)
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 2.00
bDeviceClass 9 Hub
bDeviceSubClass 0
bDeviceProtocol 1 Single TT
bMaxPacketSize0 64
idVendor 0x1d6b Linux Foundation
idProduct 0x0002 2.0 root hub
bcdDevice 4.14
iManufacturer 3 Linux 4.14.8-1-ARCH xhci-hcd
iProduct 2 xHCI Host Controller
iSerial 1 0000:00:14.0
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 25
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0xe0
Self Powered
Remote Wakeup
MaxPower 0mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 9 Hub
bInterfaceSubClass 0
bInterfaceProtocol 0 Full speed (or root) hub
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0004 1x 4 bytes
bInterval 12
Hub Descriptor:
bLength 11
bDescriptorType 41
nNbrPorts 14
wHubCharacteristic 0x000a
No power switching (usb 1.0)
Per-port overcurrent protection
TT think time 8 FS bits
bPwrOn2PwrGood 10 * 2 milli seconds
bHubContrCurrent 0 milli Ampere
DeviceRemovable 0x00 0x00
PortPwrCtrlMask 0xff 0xff
Hub Port Status:
Port 1: 0000.0100 power
Port 2: 0000.0100 power
Port 3: 0000.0100 power
Port 4: 0000.0100 power
Port 5: 0000.0100 power
Port 6: 0000.0100 power
Port 7: 0000.0100 power
Port 8: 0000.0103 power enable connect
Port 9: 0000.0100 power
Port 10: 0000.0100 power
Port 11: 0000.0100 power
Port 12: 0000.0103 power enable connect
Port 13: 0000.0100 power
Port 14: 0000.0100 power
Device Status: 0x0001
Self Powered
@aesophor
Copy link

aesophor commented Jan 9, 2020

Hi, have you found a solution to this problem?

@samuelsadok
Copy link
Author

Nope, I didn't invest any more significant time and probably will be unable to do so within the next few weeks.

But here are some suggestions how to proceed:

  • Investigate the schematics for the laptop. To the best of my knowledge this one is for the MacBookPro 15" late 2013. Observations:
    • The SD card reader is on a separate PCB which is connected via J9500 and J9510
    • It is connected connected via USB3 to the south bridge (aka LynxPoint Mobile, U1100 in the datasheet), specifically the pins PERN2_USB3RN4, PERP2_USB3RP4, PETN2_USB3TN4 and PETN2_USB3TP4.
    • In contrast to normal USB3 devices, the card reader does not use any additional USB2 wires, it uses exclusively the SuperSpeed wires. Compare this for instance to the two external USB ports "EXTA" (left) and EXTB (right) which both use 6 wires. Not sure if that confuses the kernel (might ask on the mailing list).
    • OC6*/GPIO10 of the south bridge controls the XDP_DB2_SD_PWR_EN which most likely controls power of the SD card reader. Maybe this pin is misconfigured in the ACPI tables so Linux doesn't know about it. Maybe the firmware forces the pin to high during boot, which would explain why it works before suspend. But even if it's correctly configured, we could try to reset the SD card reader by briefly pulling this GPIO low.
  • open the laptop and hook up an oscilloscope to check if the card reader has power and if there is data on the USB3 TX and RX lines.
  • somehow record what macOS is doing. For instance run it in QEMU and attach a kernel debugger.

@aesophor
Copy link

Thank you so much for your detailed reply!

@samuelsadok
Copy link
Author

Actually, looking at the schematics left me curious, I had to try.

Turns out pulling GPIO10 low for 1 second and then high makes the Card Reader reappear.

Warning: If you don't have a MacBook Pro Retina 15" late 2013, don't try this without checking your schematics. They float around the web for most models. You could damage your hardware otherwise. Verify that GPIO10 is connected to a net called XDP_DB2_SD_PWR_EN or similar.

  1. Download https://gist.github.com/samuelsadok/5f0ef2f366036a950b4d6dc63bfb8233 (mostly derived from @whitequark's work)
  2. Compile: gcc -std=c11 -lpci -Wall -g -o gpioke gpioke.c
  3. Toggle GPIO10 low and then high: sudo ./gpioke --set-dir 10 1 --set-level 10 0 --sleep 1000 --set-level 10 1
  4. lsusb should show Apple, Inc. Card Reader now

This is repeatable: The card reader will disappear again at the next suspend but the above command makes it appear again.
Probably a quirk should be added to the kernel.

@aesophor
Copy link

Jesus, it works on my MacBook Pro Retina 15" mid 2014, thank you so much!

I wonder if it's possible to make the mounted SD card "survive" laptop suspensions (like mounted USB flash drives)?

@samuelsadok
Copy link
Author

Nice to hear!
I suppose when the kernel does this transparently and/or fast enough, the mount should survive a suspend cycle.
I'm checking on the mailing list to see if we can get something like this upstreamed.

@samuelsadok
Copy link
Author

samuelsadok commented Dec 18, 2020 •
edited

If anyone comes here and finds that this doesn't work: newer kernel versions (in my case 5.9) give up trying to enumerate the internal USB port after a certain amount of time. But if I put the MacBook back to sleep and wake it up again, the kernel once more tries to enumerate the port for a limited number of times. The dmesg message we're looking for is something like usb usb2-port4: Cannot enable. Maybe the USB cable is bad?. During this time the command shown above should work again.

Meanwhile I haven't pursued upstreaming of this fix very much but maybe I should pick it up at some point.

@dododevs
Copy link

dododevs commented Dec 26, 2020 •
edited

Awesome reverse-engineering work.
I have the same problem on a MacBook Air 13" mid 2013 [A1466]. Before running the program, I checked the schematics I found online (https://drive.google.com/file/d/0B6IqcVTk0jpYanpBbHV0MFc3bTg/view?usp=sharing, pages 19 and 33) and I noticed GPIO10 seems to be connected to the XDP_DB2_PCH_GPIO10_AP_PWR_EN net.
I could not find any obvious enabling or control bus from the PCH to the SD card reader. The only visible link is the XDP_DB3_PCH_GPIO14_SDCONN_STATE_CHANGE, but in the wrong direction (INto the PCH).

I have no experience whatsoever with PCH GPIOs or with reading schematics, so my observations could be completely pointless.
Would it be possible for you to take a look at the schematics and share your thoughts?

Thank you very much

Shortly after posting this comment I figured out I was looking at the wrong schematic... from this new and hopefully correct one I can see the aforementioned XDP_DB2_SD_PWR_EN is indeed connected to the PCH at GPIO44.
I should be able to use your program to apply the workaround then.

When I tried to launch it though, the output of sudo ./gpioke --dump was the following:

[*] Trying to init ICH0..ICH5...
[*] GPIOBASE=00000000, GC=00
[-] GPIOBASE not implemented at 0058
[*] Trying to init ICH6..ICH9 or Series 5..9 PCH...
[*] GPIOBASE=00000801, GC=10
[*] GPIO decoding is enabled
[*] GPIO lockdown is disabled
[*] USE_SEL1=00000000
[*] IO_SEL1=00000000
[*] LVL1=00000000
[*] USE_SEL2=00000000
[*] IO_SEL2=00000000
[*] LVL2=00000000
[*] USE_SEL3=00000000
[*] IO_SEL3=00000000
[*] LVL3=00000000
GPIO0: not a GPIO
GPIO1: not a GPIO
GPIO2: not a GPIO
GPIO3: not a GPIO
GPIO4: not a GPIO
GPIO5: not a GPIO
GPIO6: not a GPIO
GPIO7: not a GPIO
GPIO8: not a GPIO
GPIO9: not a GPIO
GPIO10: not a GPIO
GPIO11: not a GPIO
GPIO12: not a GPIO
GPIO13: not a GPIO
GPIO14: not a GPIO
GPIO15: not a GPIO
GPIO16: not a GPIO
GPIO17: not a GPIO
GPIO18: not a GPIO
GPIO19: not a GPIO
GPIO20: not a GPIO
GPIO21: not a GPIO
GPIO22: not a GPIO
GPIO23: not a GPIO
GPIO24: not a GPIO
GPIO25: not a GPIO
GPIO26: not a GPIO
GPIO27: not a GPIO
GPIO28: not a GPIO
GPIO29: not a GPIO
GPIO30: not a GPIO
GPIO31: not a GPIO
GPIO32: not a GPIO
GPIO33: not a GPIO
GPIO34: not a GPIO
GPIO35: not a GPIO
GPIO36: not a GPIO
GPIO37: not a GPIO
GPIO38: not a GPIO
GPIO39: not a GPIO
GPIO40: not a GPIO
GPIO41: not a GPIO
GPIO42: not a GPIO
GPIO43: not a GPIO
GPIO44: not a GPIO
GPIO45: not a GPIO
GPIO46: not a GPIO
GPIO47: not a GPIO
GPIO48: not a GPIO
GPIO49: not a GPIO
GPIO50: not a GPIO
GPIO51: not a GPIO
GPIO52: not a GPIO
GPIO53: not a GPIO
GPIO54: not a GPIO
GPIO55: not a GPIO
GPIO56: not a GPIO
GPIO57: not a GPIO
GPIO58: not a GPIO
GPIO59: not a GPIO
GPIO60: not a GPIO
GPIO61: not a GPIO
GPIO62: not a GPIO
GPIO63: not a GPIO
GPIO64: not a GPIO
GPIO65: not a GPIO
GPIO66: not a GPIO
GPIO67: not a GPIO
GPIO68: not a GPIO
GPIO69: not a GPIO
GPIO70: not a GPIO
GPIO71: not a GPIO
GPIO72: not a GPIO
GPIO73: not a GPIO
GPIO74: not a GPIO
GPIO75: not a GPIO
[+] cleaning up...
[+] Done

Does that mean GPIO access is broken on this machine?

@samuelsadok
Copy link
Author

Theoretically "GPIOX: not a GPIO" just means that GPIOX is currently not configured as GPIO. When you set the input/output direction, the program will also configure the pin as a GPIO. So you could just go ahead and try to configure the pin as output.

What's strange in your case is that all GPIOs show as disabled. In fact all 9 GPIO registers read as 0x00000000. So it's possible that the register read function (inl) just doesn't work for some reason. Maybe the process fails to get I/O permissions (ioperm())? I don't know much about this but maybe the kernel and/or distribution you're running has additional security features enabled. I'm running Arch Linux on kernel version 5.9.12.

@dizzy314
Copy link

@dododevs: did you manage to make it work?

I tried on my macbook air 2013 but it does't resurrect the sdcard. What is strange is that gpio24 is always reported low:

# ./gpioke --set-dir 24 1 --set-level 24 0 --sleep 1000 --set-level 24 1 2>/dev/null; ./gpioke --dump 2>/dev/null | grep output
[+] configuring GPIO 24 as output
[+] setting GPIO 24 to low
[+] sleeping
[+] setting GPIO 24 to high
[+] cleaning up...
[+] Done
GPIO24: output, low

I can however change gpio44, which should be connected to SD_PWR_EN, so gpioke seems working.

@dododevs
Copy link

@dizzy314 yes! I've spent some time on this and got invaluable information from @andy-shev who wrote the driver for the GPIO interface on this machine. I came up with a gist containing (theoretically) all the needed steps. It's here. Lately I found out that a tweak in the kernel could also be needed for it to work, but I didn't investigate further. You're welcome to try and tell me how it goes!

@dizzy314
Copy link

@dododevs: nice work.

Unfortunately my kernel (ubuntu 5.13.0-28-generic) is not compiled with CONFIG_GPIO_CDEV_V1 and while I can now detect the gpio chip the userspace programs used to control the pins don't work.

Since I don't really need the sd-card on this machine I won't recompile the kernel only to handle the supend/resume issue.

@dododevs
Copy link

@dizzy314 I have doubts about why controlling GPIOs is not working for you...

I have checked and it looks like CONFIG_GPIO_CDEV_V1 enables a deprecated GPIO character interface, while CONFIG_GPIO_CDEV should be the flag you want to enable. Back when I was testing the solution I proposed I was also using Ubuntu (as I guess you do, or some derivative) and I did not have to tweak any kernel flags for GPIO character devices to appear.
Also, I have just tested it again on Arch (5.15.10-arch1-1 vanilla kernel) and it seems to be working.

So my question is, how did you test it and how did you come up with that kernel flag to be the root of the problem? You say you are detecting the GPIO chip though, which should only be possible when CONFIG_GPIO_CDEV is enabled, as per here. If you wish, you can drop some hints by sharing a dump of dmesg, acpidump (as root), gpiodetect (as root) and the kernel configuration.

@dizzy314
Copy link

@dododevs: I'm using ubuntu-20.04 LTS with kernel 5.13.0 and gpiod 1.4.1-4.

Kernel config (/boot/config-5.13.0-28-generic):

CONFIG_GPIO_CDEV=y
# CONFIG_GPIO_CDEV_V1 is not set

dmesg:

[    0.482159] efi: loading SSDT from variable lpgpio-12b23f8c-8e75-11ec-9bbc-a355d847d052
[    0.494529] ACPI: Host-directed Dynamic ACPI Table Load:
[    0.494529] ACPI: SSDT 0xFFFF94118107AF00 000083 (v05        LPGPIO   00000001 INTL 20190509)

acpidump:

SSDT @ 0x0000000000000000
    0000: 53 53 44 54 83 00 00 00 05 48 00 00 00 00 00 00  SSDT.....H......
    0010: 4C 50 47 50 49 4F 00 00 01 00 00 00 49 4E 54 4C  LPGPIO......INTL
    0020: 09 05 19 20 A0 0A 00 15 5C 5F 53 42 5F 06 00 5B  ... ....\_SB_..[
    0030: 82 42 05 47 50 49 30 14 10 5F 48 49 44 00 A4 0D  .B.GPI0.._HID...
    0040: 49 4E 54 33 33 43 37 00 08 52 42 55 46 11 1F 0A  INT33C7..RBUF...
    0050: 1C 87 17 00 01 0C 03 00 00 00 00 00 08 00 00 FF  ................
    0060: 0B 00 00 00 00 00 00 00 04 00 00 79 00 14 0B 5F  ...........y..._
    0070: 43 52 53 08 A4 52 42 55 46 14 09 5F 53 54 41 00  CRS..RBUF.._STA.
    0080: A4 0A 0F

gpiodetect:

# gpiodetect 
gpiochip0 [INT33C7:00] (95 lines)

# gpioinfo gpiochip0
gpioinfo: error creating line iterator: Invalid argument

# gpioget 0 44
gpioget: error reading GPIO values: Invalid argument

The problem is described here:

There is a mismatch between kernel and libgpiod: the kernel is compiled without CONFIG_GPIO_CDEV_V1 (which may be correct since it is deprecated) but libgpiod still uses version 1 of the GPIO interface. In my opinion the bug is not in the kernel but in libgpiod which requires a deprecated interface.

I will wait for the upcoming ubuntu 22.04 and see if the bug is fixed. If not I will not spend other time on this issue since I don't really need to use the sdcard after a suspend/resume.

@dododevs
Copy link

dododevs commented Feb 17, 2022 •
edited

@dizzy314 I see.

Considering the fact that the device is set up and initialized (thus most of the work is done) what I guess you might try is a replacement for libgpiod. This blog post mentions this very issue and suggests to look into https://github.com/warthog618/gpiod. It should be using v2 of the GPIO character ABI and not the deprecated (now removed) v1. It builds and runs on my machine.

Hope you fix this, either with this or in the future!

Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment