This guide instructs you in how to unbrick an Amazon Kindle Paperwhite. The consequences of following it are your own responsibility. This method (opening the Kindle and using the serial interface) should be a last resort and should only be considered if other methods fail
This guide instructs you in how to unbrick an Amazon Kindle Paperwhite. The consequences of following it are your own responsibility. This method (opening the Kindle and using the serial interface) should be a last resort and should only be considered if other methods fail
This guide instructs you in how to unbrick an Amazon Kindle Paperwhite. The consequences of following it are your own responsibility. This method (opening the Kindle and using the serial interface) should be a last resort and should only be considered if other methods fail
Here is the best setup (I think so :D) for K-series Keychron keyboards on Linux.
Most of these commands have been tested on Ubuntu 20.04 and should also work on most Debian-based distributions. If a command happens not to work for you, take a look in the comment section.
Keychron Keyboards on Linux use the hid_apple driver (even in Windows/Android mode), both in Bluetooth and Wired modes.
By default, this driver uses the F-keys as multimedia shortcuts and you have to press Fn + the key to get the usual F1 through F12 keys.
| import backtrader as bt | |
| import pandas as pd | |
| import numpy as np | |
| class PivotPointLine(bt.Indicator): | |
| lines = ('pivot_up', 'pivot_down', 'pl_value', 'direction',) | |
| params = ( | |
| ('pivot_window_len', 12), | |
| ('history_bars_as_multiple_pwl', 30) |
| def show_worst_drawdown_periods(returns, top=5): | |
| """ | |
| Prints information about the worst drawdown periods. | |
| Prints peak dates, valley dates, recovery dates, and net | |
| drawdowns. | |
| Parameters | |
| ---------- | |
| returns : pd.Series |
| #!/bin/bash | |
| # cvt 2560 1440 30 | |
| # xrandr --newmode "2560x1440_30.00" 146.25 2560 2680 2944 3328 1440 1443 1448 1468 -hsync +vsync | |
| # xrandr --addmode HDMI-1 2560x1440_30.00 | |
| # xrandr --output HDMI-1 --mode 2560x1440_30.00 | |
| # This one is easier on the eyes than 3840x2160 @24Hz: | |
| # cvt -r 2560 1440 60 | |
| # 2560x1440 59.95 Hz (CVT 3.69M9-R) hsync: 88.79 kHz; pclk: 241.50 MHz |
| var fs = require('fs'); | |
| //this is the path that QTNetwork classes uses for caching files for it's http client | |
| //the path should be the one that has 16 folders labeled 0,1,2,3,...,F | |
| exports.cachePath = '/path/to/phantomjs/cache/data/folder'; | |
| //this is the extension used for files in the cache path | |
| exports.cacheExtension = "d"; | |
| //the resources that are to be saved |
| INPUT: | |
| MAXFLDUR(15), //Max Flag Duration | |
| FLAGMIN(2.5), // Max Atr in lowest point in flag | |
| PX(23), //Max Pole Duration. | |
| UPT1BARS(70), // Bars for Uptrend leading to flag | |
| POLEMIN(5.5), //Min ATR Height of the pole | |
| LBF(50), // Min distance between flags | |
| ATRmin(5),// Min volatility change | |
| K(1.2), //Profit Target constant | |
| timeexit(100), //Time exit bars |
