Skip to content

Instantly share code, notes, and snippets.

@satyamisme

satyamisme/Clover UEFI No Bootable Devices Fix.md

Forked from EricRabil/Clover UEFI No Bootable Devices Fix.md
Created July 29, 2021 16:06
Show Gist options
  • Save satyamisme/7791f8c134162a390d276c6e522bde1b to your computer and use it in GitHub Desktop.
Save satyamisme/7791f8c134162a390d276c6e522bde1b to your computer and use it in GitHub Desktop.
Download ZIP
Raw
Clover UEFI No Bootable Devices Fix.md
  • Boot into clover off of the USB
  • Start up the Clover EFI shell
  • Pull the USB (saves confusion in the next step)
  • Type "map" (no quotes)
  • Look at the drives and apply some thinking about which one is the drive where your Clover EFI drive is - the drive# from disk util will help if you have several drives/partitions showing up. Once you've got it, note the drive - e.g. mine was "FS2"
  • Type "bcfg boot dump" (no quotes)
  • You'll see each boot entry proceeded with a number. For the love of Pete, don't use any of those - determine the next number up. My highest was 03, so I used 04 in the next step.
  • Type the following to create the boot entry:
  • bcfg boot add 04 FS2:\EFI\CLOVER\CLOVERX64.EFI CloverUEFI
  • In the above step, the path is helped out by having checked my mounted EFI drive on my system. The last part, "CloverUEFI" above is how the boot entry will appear in BIOS - name this as you will.
  • Type "bcfg boot dump" again to be sure your new entry made it.
  • Exit, shut down, pull the USB if you didn't already.
  • Hold down DEL to open BIOS settings - and in my case - CloverUEFI was in the Boot options. I set it as primary, and everything was back to normal with no more need to use the USB.

source

Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment