Making Measurements in QuPath

!Making Measurements in QuPath

Collections of scripts harvested mainly from Pete, but also picked up from the forums

TOC

Accessing dynamic measurements.groovy - Most annotation measurements are dynamically created when you click on the annotation, and 
are not accessible through the standard getMeasurement function. This is a way around that.

Affine transformation.groovy - access more accurate measurements for the affine transformation used in the image alignment (m5/m6+)

Alignment of local cells.groovy - check neighborhood for similarly aligned cells

Angles for cells.groovy - Calculate angles relative to horizontal.

Area measurements per class to annotation.groovy - Summary measurements for tile/area based analyses. Should work for all classes present.

Area measurements to annotation.groovy - Kind of terrible holdover, but adds size measurements to Annotations. Could be altered for
detection tiles, which would likely be more useful.

Cell summary measurements to annotation.groovy - Go through the cells and add some sort of summary measurement to their parent
annotation. Examples might be the mean area of all cells, or the min and max intensities of cells of a certain class. Get createive.

Chromaticity - cell measurement.groovy - Demonstration of how to calculate the green chromaticity using Calculate Features.

Class cell counts,percentages and density to parent annotation.groovy - mostly same as above but for cells

Class percentages to TMA measurements.groovy - Checks all cells in each core for membership within a listed set of classes.

Colocalization v4.groovy - Actually v3, and works with 0.2.0m2. Calculate Pearson's and Manders coefficients for detections
Added a version for 0.2.0m7

Colocalization 0.1.2.groovy - Version of above script that works for 0.1.2 and 0.1.3. Does not work for 0.2.0+

Create detection measurements.groovy - Create new detection measurements as combinations of other detection measurements.
For example, the ratio of the channel 2 nuclear intensity to the channel 3 nuclear intensity.

Detections - add full intensity measurements.groovy - Adds intensity measurements to objects, including median and border/membrane

Label cells by TMA core.groovy - Rename cells based on their parent core. Could probably be done better with getDecendantObjects()

Local Cell Density.groovy - Add a measurement to each cell based on the number of other cells within X microns - very slow

Metadata by script in m5.groovy - set pixel sizes by adjusting the metadata for an image.
metadata by script in m10.groovy - 0.2.0 M10

Nearest Neighbors by class.groovy - calculates NN distances

Nuclear and cytoplasmic color vector means.groovy - Complicated script, but essentially allows you to create sets of color vectors
and obtain cytoplasmic and nuclear mean values for them. Useful in complex brightfield stains, has been used to differentiate cells in
5 stain plus hematoxylin images.

Points are in which annotations.groovy - version 1 See thread for intended use: https://forum.image.sc/t/manual-annotation-and-measurements/25051/5?u=research_associate

RSquared calculation.groovy - Calculates R-squared values. Does not currently save them anywhere.

Tile summary measurements to parent Annotation.groovy - Creates measurements for the total area and percentage area for each class.
Percentages are based off of annotation area, a different calculation would be needed if you have a "whitespace" tile type

Total subcellular intensity to cell value.groovy - Sums the total intensity of subcellular detections (area*mean intensity summed).



Primary functions here include:
Using "hierarchy = getCurrentHierarchy()" to get access to the hierarchy, so that you can more easily access subsets of cells

Using findAll{true/false statements here} to generate lists of objects you want to perform operations on.
The following gets all objects that are positive within whatever preceeds findAll
.findAll{it.getPathClass() == getPathClass("Positive")}

The simplest way to access a measurement is... measurement(object,"measurement name")
So if I wanted to print the nuclear area of each of my cells, for some reason:
getCellObjects().each{
    print measurement(it, "Nucleus: Area)
}
That cycles through each cell, and prints "it"s nuclear area.

The following access the measurement list, which is the list you see in the lower right of the Hierarchy tab when selecting 
an object.
getMeasurementList()
getMeasurementValue(key)
putMeasurement(key, value)

Sometimes you may want to search an objects list using:
ml = object.getMeasurementList()
to generate a list called ml.

For any given list of objects, you could also use
getCellObjects().each{ measurement(it, "Nucleus: Area")}
to access the nuclear area of each cell.

Other times, you may know exactly what you want to modify, and can just use:
object.getMeasurementList().putMeasurement(key, value)
For adding a micrometer symbol in v1.2, use  " + qupath.lib.common.GeneralTools.micrometerSymbol() + "

Accessing dynamic measurements.groovy

//Courtesy of Olivier Burri on QuPath Gitter
//For 0.1.2
//import qupath.lib.gui.models.ObservableMeasurementTableData

//For 0.2.0
import qupath.lib.gui.measure.ObservableMeasurementTableData


def ob = new ObservableMeasurementTableData();

def annotations = getAnnotationObjects()
 // This line creates all the measurements
 ob.setImageData(getCurrentImageData(),  annotations);


annotations.each { annotation->println( ob.getNumericValue(annotation, "H-score") )
}
/*
Using this script to access the X and Y coordinates per cell
cells = getCellObjects()
ob = new ObservableMeasurementTableData();
ob.setImageData(getCurrentImageData(),  cells);

cells.each{
    print ob.getNumericValue(it, "Centroid X µm")
    
}

import qupath.lib.gui.measure.ObservableMeasurementTableData



/*
Using this script to calculate circularity for annotations

import qupath.lib.gui.models.ObservableMeasurementTableData
def ob = new ObservableMeasurementTableData();

def annotations = getAnnotationObjects()
 // This line creates all the measurements
ob.setImageData(getCurrentImageData(),  annotations);


annotations.each { 
    area=ob.getNumericValue(it, "Area µm^2")
    perimeter=ob.getNumericValue(it, "Perimeter µm")
    circularity = 4*3.14159*area/(perimeter*perimeter)
    it.getMeasurementList().putMeasurement("Circularity", circularity)
}

*/

Affine transformation.groovy

//0.2.0
import qupath.lib.gui.align.ImageServerOverlay

def overlay = getCurrentViewer().getCustomOverlayLayers().find {it instanceof ImageServerOverlay}
print overlay.getAffine()

Alignment of local cells.groovy

//Uses Ben Pearson's script from https://groups.google.com/forum/#!searchin/qupath-users/rotate%7Csort:date/qupath-users/UvkNb54fYco/ri_4K6tiCwAJ
//Creates an area defined by the ortho and paradist measurements (orthogonal to the cell's orientation or parallel)
//Calculates how similarly the cells with centroids inside of that area are aligned.
//Requires "Angles for cells.groovy" script below to be run first.
//0.2.0
//Edit below for 0.1.2


print "running, please wait, Very Slow Process."

def server = getCurrentImageData().getServer()
//For 0.1.2
//def sizePixels = server.getAveragedPixelSizeMicrons()
//For 0.2.0
sizePixels = server.getPixelCalibration().getAveragedPixelSizeMicrons()

//EDIT SHAPE OF REGION TO CHECK FOR ALIGNMENT HERE
def orthoDist = 40/sizePixels
def paraDist = 30/sizePixels

def triangleArea(double Ax,double Ay,double Bx,double By,double Cx,double Cy) {
    return (((Ax*(By- Cy)  +  Bx*(Cy-Ay)  +  Cx*(Ay-By))/2).abs())
}

//def DIST = 10
def cellList = getCellObjects()

//scan through all cells
getCellObjects().each{
    //get some values for th current cell
    def originalAngle = it.getMeasurementList().getMeasurementValue("Cell angle")
    def radians = Math.toRadians(-originalAngle)
    def cellX = it.getNucleusROI().getCentroidX()
    def cellY = it.getNucleusROI().getCentroidY()
    //create a list of nearby cells
/* SIMPLE VERSION, A BOX
    def nearbyCells = cellList.findAll{ c->
        DIST > server.getAveragedPixelSizeMicrons()*Math.sqrt(( c.getROI().getCentroidX() - cellX)*(c.getROI().getCentroidX() - cellX)+( c.getROI().getCentroidY() - cellY)*(c.getROI().getCentroidY() - cellY));
    } */

/*
    def roi = new RectangleROI(cellX-orthoDist/2, cellY-paraDist/2, orthoDist, paraDist)
    def points = roi.getPolygonPoints()
    def roiPointsArx = points.x.toArray()
    def roiPointsAry = points.y.toArray()
*/
    def roiPointsArx = [cellX-paraDist/2, cellX+paraDist/2, cellX+paraDist/2, cellX-paraDist/2 ]
    def roiPointsAry = [cellY+orthoDist/2, cellY+orthoDist/2, cellY-orthoDist/2, cellY-orthoDist/2 ]


    for (i= 0; i<  roiPointsAry.size(); i++)
        {
         // correct the center to 0
          roiPointsArx[i] = roiPointsArx[i] - cellX
          roiPointsAry[i] = roiPointsAry[i] - cellY

          //Makes prime placeholders, which allows the calculations x'=xcos(theta)-ysin(theta), y'=ycos(theta)+xsin(theta) to be performed
          double newPointX  = roiPointsArx[i]
          double newPointY = roiPointsAry[i]

          // then rotate

          roiPointsArx[i] = (newPointX * Math.cos(radians)) - (newPointY * Math.sin(radians))

          roiPointsAry[i] = (newPointY * Math.cos(radians)) + (newPointX * Math.sin(radians))

          // then move it back
          roiPointsArx[i] = roiPointsArx[i] + cellX
          roiPointsAry[i] = roiPointsAry[i] +  cellY

    }
//addObject(new PathAnnotationObject(new PolygonROI(roiPointsArx as float[], roiPointsAry as float[], -1, 0, 0)))
    def nearbyCells = cellList.findAll{ orthoDist*paraDist-5 < ( triangleArea(roiPointsArx[0], roiPointsAry[0],roiPointsArx[1] ,roiPointsAry[1], it.getNucleusROI().getCentroidX(),it.getNucleusROI().getCentroidY())
        +triangleArea(roiPointsArx[1], roiPointsAry[1],roiPointsArx[2] ,roiPointsAry[2], it.getNucleusROI().getCentroidX(),it.getNucleusROI().getCentroidY())
        +triangleArea(roiPointsArx[2], roiPointsAry[2],roiPointsArx[3] ,roiPointsAry[3], it.getNucleusROI().getCentroidX(),it.getNucleusROI().getCentroidY())
        +triangleArea(roiPointsArx[3], roiPointsAry[3],roiPointsArx[0] ,roiPointsAry[0], it.getNucleusROI().getCentroidX(),it.getNucleusROI().getCentroidY())) &&
        orthoDist*paraDist+5 >( triangleArea(roiPointsArx[0], roiPointsAry[0],roiPointsArx[1] ,roiPointsAry[1], it.getNucleusROI().getCentroidX(),it.getNucleusROI().getCentroidY())
        +triangleArea(roiPointsArx[1], roiPointsAry[1],roiPointsArx[2] ,roiPointsAry[2], it.getNucleusROI().getCentroidX(),it.getNucleusROI().getCentroidY())
        +triangleArea(roiPointsArx[2], roiPointsAry[2],roiPointsArx[3] ,roiPointsAry[3], it.getNucleusROI().getCentroidX(),it.getNucleusROI().getCentroidY())
        +triangleArea(roiPointsArx[3], roiPointsAry[3],roiPointsArx[0] ,roiPointsAry[0], it.getNucleusROI().getCentroidX(),it.getNucleusROI().getCentroidY()))
    }

    //print(nearbyCells)

    //prevent divide by zero errors
    if (nearbyCells.size() < 2){ it.getMeasurementList().putMeasurement("LMADSD", 90); return;}
    def angleList = []

    //within the local cells, find the differences in angle
    for (cell in nearbyCells){
        def currentAngle = cell.getMeasurementList().getMeasurementValue("Cell angle")
        def angleDifference = (currentAngle - originalAngle).abs()
        //angles between two objects should be at most 90 degrees, or perpendicular
        if (angleDifference > 90){
            angleList << (180 - Math.max(currentAngle, originalAngle)+Math.min(currentAngle,originalAngle))
        } else {angleList << angleDifference}
    }
    //complete the list with the original data point
    //angleList << 0

    //calculate the standard deviation of the angular differences
    def localAngleDifferenceMean = angleList.sum()/angleList.size()

    def variance = 0
    angleList.each{v-> variance += (v-localAngleDifferenceMean)*(v-localAngleDifferenceMean)}

    def stdDev = Math.sqrt(variance/(angleList.size()))
    // add measurement for local, mean angle difference, standard deviation
    //println("stddev "+stdDev)
    it.getMeasurementList().putMeasurement("LMADSD", stdDev)
}
print "done"

Angles for cells.groovy

//from Pete
//0.2.0
//Change for 0.1.2 shown below

import qupath.imagej.objects.*

getCellObjects().each{
    def ml = it.getMeasurementList()
    def roi = it.getNucleusROI()
    //for 0.1.2
    //def roiIJ = ROIConverterIJ.convertToIJRoi(roi, 0, 0, 1)
    roiIJ = IJTools.convertToIJRoi(roi, 0, 0, 1)
    def angle = roiIJ.getFeretValues()[1]
    ml.putMeasurement('Nucleus angle', angle)
    ml.close()
}
fireHierarchyUpdate()
print "done"

Area measurements per class to annotation.groovy

//Checks for all detections within a given annotation, DOES NOT EXCLUDE DETECTIONS WITHIN SUB-ANNOTATIONS.
//That last bit should make it compatible with trained classifiers.
//Result is the percentage area for all detections of a given class being applied as a measurement to the parent annotation.
//0.1.2

import qupath.lib.objects.PathDetectionObject
def imageData = getCurrentImageData()
def server = imageData.getServer()
def pixelSize = server.getPixelHeightMicrons()
Set classList = []
for (object in getAllObjects().findAll{it.isDetection() /*|| it.isAnnotation()*/}) {
    classList << object.getPathClass()
}
println(classList)
hierarchy = getCurrentHierarchy()

for (annotation in getAnnotationObjects()){
    def annotationArea = annotation.getROI().getArea()

    for (aClass in classList){
        if (aClass){
            def tiles = hierarchy.getDescendantObjects(annotation,null, PathDetectionObject).findAll{it.getPathClass() == aClass}
            double totalArea = 0
    
            for (def tile in tiles){
                totalArea += tile.getROI().getArea()
            }
            annotation.getMeasurementList().putMeasurement(aClass.getName()+" area px", totalArea)
            annotation.getMeasurementList().putMeasurement(aClass.getName()+" area um^2", totalArea*pixelSize*pixelSize)

            annotation.getMeasurementList().putMeasurement(aClass.getName()+" area %", totalArea/annotationArea*100)
        }
    }

}
println("done")

Area measurements to annotation.groovy

//Useful when using detection objects returned from ImageJ macros.  Note that areas are in pixels and would need to be converted to microns
//0.1.2
import qupath.lib.objects.PathDetectionObject

hierarchy = getCurrentHierarchy()

for (annotation in getAnnotationObjects()){
    //Block 1
    def tiles = hierarchy.getDescendantObjects(annotation,null, PathDetectionObject)
    double totalArea = 0
    for (def tile in tiles){
        totalArea += tile.getROI().getArea()
    }


    annotation.getMeasurementList().putMeasurement("Marked area px", totalArea)

    def annotationArea = annotation.getROI().getArea()
    annotation.getMeasurementList().putMeasurement("Marked area %", totalArea/annotationArea*100)

}
println("done")

Cell summary measurements to annotation.groovy

//Sometimes you may want to add a summary measurement from cells within each annotation to the annotation itself.
//This will allow you to see that measurement in the "Show Annotation Measurements" list.

//In this case, it will add the total area taken up by Positive class cells within each annotation to their parent
//annotation as "Positive Area"

//0.1.2

import qupath.lib.objects.PathCellObject

hierarchy = getCurrentHierarchy()

for (annotation in getAnnotationObjects()){
    //Block 1
    def positiveCells = hierarchy.getDescendantObjects(annotation,null, PathCellObject).findAll{it.getPathClass() == getPathClass("Positive")}
    double totalArea = 0
    for (def cell in positiveCells){
        totalArea += cell.getMeasurementList().getMeasurementValue("Cell: Area")
    }
    //Comment the following in or out depending on whether you want to see the output
    //println("Mean area for Positive is: " + totalArea/positiveCells.size)
    //println("Total Positive Area is: " + totalArea)
    
    //Add the total as "Positive Area" to each annotation.
    annotation.getMeasurementList().putMeasurement("Positive Area", totalArea)
    //Add the percentage positive area to the annotations measurement list
    def annotationArea = annotation.getROI().getArea()
    annotation.getMeasurementList().putMeasurement("Positive Area %", totalArea/annotationArea*100)
    //Block 2 - add as many blocks as you have classes
    //...
}
    

Chromaticity - cell measurement.groovy

// https://forum.image.sc/t/detecting-purple-chromogen-classifying-cells-based-on-green-chromaticity/35576/5
//0.2.0
// Add intensity features (cells already detected)
selectCells();
runPlugin('qupath.lib.algorithms.IntensityFeaturesPlugin', '{"pixelSizeMicrons": 1.0,  "region": "Cell nucleus",  "tileSizeMicrons": 25.0,  "colorOD": false,  "colorStain1": false,  "colorStain2": false,  "colorStain3": false,  "colorRed": true,  "colorGreen": true,  "colorBlue": true,  "colorHue": false,  "colorSaturation": false,  "colorBrightness": false,  "doMean": true,  "doStdDev": false,  "doMinMax": false,  "doMedian": false,  "doHaralick": false,  "haralickDistance": 1,  "haralickBins": 32}');
runPlugin('qupath.lib.algorithms.IntensityFeaturesPlugin', '{"pixelSizeMicrons": 1.0,  "region": "ROI",  "tileSizeMicrons": 25.0,  "colorOD": false,  "colorStain1": false,  "colorStain2": false,  "colorStain3": false,  "colorRed": true,  "colorGreen": true,  "colorBlue": true,  "colorHue": false,  "colorSaturation": false,  "colorBrightness": false,  "doMean": true,  "doStdDev": false,  "doMinMax": false,  "doMedian": false,  "doHaralick": false,  "haralickDistance": 1,  "haralickBins": 32}');

// Add chromaticity measurements
def nucleusMeasurement = "Nucleus: 1.00 µm per pixel: %s: Mean"
def cellMeasurement = "ROI: 1.00 µm per pixel: %s: Mean"

for (cell in getCellObjects()) {
    def measurementList = cell.getMeasurementList()
    addGreenChromaticity(measurementList, nucleusMeasurement)
    addGreenChromaticity(measurementList, cellMeasurement)
    measurementList.close()
}
fireHierarchyUpdate()

def addGreenChromaticity(measurementList, measurement) {
    double r = measurementList.getMeasurementValue(String.format(measurement, "Red"))
    double g = measurementList.getMeasurementValue(String.format(measurement, "Green"))
    double b = measurementList.getMeasurementValue(String.format(measurement, "Blue"))
    def name = String.format(measurement, "Green chromaticity")
    measurementList.putMeasurement(name, g/Math.max(1, r+g+b))
}

Class cell counts,percentages and density to parent annotation 0.2.0.groovy

//0.2.0
//Update to M5 measurements calculator for Multiplex analysis
// Initial script by Mike Nelson @Mike_Nelson on image.sc
// Project checking from Sara McArdle @smcardle on image.sc
// Additional information at link below.
// https://forum.image.sc/t/m9-multiplex-classifier-script-updates-cell-summary-measurements-visualization/34663

import qupath.lib.plugins.parameters.ParameterList
import qupath.lib.objects.PathCellObject
import qupath.lib.objects.PathObjectTools

imageData = getCurrentImageData()
server = imageData.getServer()
def cal = getCurrentServer().getPixelCalibration()
hierarchy = getCurrentHierarchy()

separatorsForBaseClass = "[.-_,:]+" //add an extra symbol between the brackets if you need to split on a different character

boolean fullClassesB = true
boolean baseClassesB = true
boolean percentages = true
boolean densities = false
boolean removeOld = false
boolean checkProject = true

/*************************************************************************/
//////////// REMOVE BELOW THIS SECTION IF RUNNING FOR PROJECT////////////////
//EDIT THE CORRECT BOOLEAN VALUES ABOVE MANUALLY

def params = new ParameterList()
        //Yes, I am bad at dialog boxes.
        .addBooleanParameter("fullClassesB", "Measurements for full classes                                                                                                                      ", fullClassesB, "E.g. CD68:PDL1 cells would be calculated on their own")
        .addBooleanParameter("baseClassesB", "Measurements for individual base classes                                                                                                           ", baseClassesB, "Measurements show up as 'All' plus the base class name")
        .addBooleanParameter("percentages", "Percentages?                                                                                                                                        ", percentages, "")
        .addBooleanParameter("densities", "Cell densities?                                                                                                                                       ", densities, "Not recommended without pixel size metadata or some sort of annotation outline")
        .addBooleanParameter("removeOld", "Clear old measurements, can be slow                                                                                                                   ", removeOld, "Slow, but needed when the classifier changes. Otherwise classes that no longer exist will not be overwritten with 0 resulting in extra incorrect measurements")
        .addBooleanParameter("checkProject", "Use class names from entire project, can be slow!                                                                                                  ", checkProject, "Needed for projects where all images are analyzed and compared")
if (!Dialogs.showParameterDialog("Cell summary measurements: M9 VALUES DO NOT AUTOMATICALLY UPDATE", params))
    return



fullClassesB = params.getBooleanParameterValue("fullClassesB")
baseClassesB = params.getBooleanParameterValue("baseClassesB")
percentages = params.getBooleanParameterValue("percentages")
densities = params.getBooleanParameterValue("densities")
removeOld = params.getBooleanParameterValue("removeOld")
checkProject = params.getBooleanParameterValue("checkProject")


//////////// REMOVE ABOVE THIS SECTION IF RUNNING FOR PROJECT ///////////////////
/*************************************************************************/



if (removeOld){
    Set annotationMeasurements = []
    getAnnotationObjects().each{it.getMeasurementList().getMeasurementNames().each{annotationMeasurements << it}}

    List remove =[]
    annotationMeasurements.each{ if(it.contains("%") || it.contains("^")) {removeMeasurements(qupath.lib.objects.PathAnnotationObject, it);}}
}
Set baseClasses = []
Set classNames = []
if (checkProject){

    getProject().getImageList().each{
        def objs = it.readHierarchy().getDetectionObjects()
        classes = objs.collect{it?.getPathClass()?.toString()}
        classNames.addAll(classes)
    }

    classNames.each{
        it?.tokenize(separatorsForBaseClass).each{str->
           baseClasses << str.trim()
        }
    }
    println("Classifications: "+classNames)
    println("Base Classes: "+baseClasses)
}else{

    classNames.addAll(getDetectionObjects().collect{it?.getPathClass()?.toString()} as Set)


    classNames.each{
        it?.tokenize(separatorsForBaseClass).each{str->
           baseClasses << str.trim()
        }
    }
    println("Classifications: "+classNames)
    println("Base Classes: "+baseClasses)
}
//This section calculates measurements for the full classes (all combinations of base classes)

if (fullClassesB){

for (annotation in getAnnotationObjects()){
    totalCells = []
    qupath.lib.objects.PathObjectTools.getDescendantObjects(annotation,totalCells, PathCellObject)


    for (aClass in classNames){
        if (aClass){
            if (totalCells.size() > 0){
                cells = totalCells.findAll{it.getPathClass().toString() == aClass}
                print cells.size()
                if (percentages) {annotation.getMeasurementList().putMeasurement(aClass.toString()+" %", cells.size()*100/totalCells.size())}
                annotationArea = annotation.getROI().getScaledArea(cal.pixelWidth, cal.pixelHeight)
                if (densities) {annotation.getMeasurementList().putMeasurement(aClass.toString()+" cells/mm^2", cells.size()/(annotationArea/1000000))}
            } else {
                if (percentages) {annotation.getMeasurementList().putMeasurement(aClass.toString()+" %", 0)}
                if (densities) {annotation.getMeasurementList().putMeasurement(aClass.toString()+" cells/mm^2", 0)}
            }
        }
    }

}
}

//This section only calculates densities of the base class types, regardless of other class combinations.
//So all PDL1 positive cells would counted for a PDL1 sub class, even if the cells had a variety of other sub classes.

if (baseClassesB){

    for (annotation in getAnnotationObjects()){
        totalCells = []
        qupath.lib.objects.PathObjectTools.getDescendantObjects(annotation,totalCells, PathCellObject)


        for (aClass in baseClasses){

            if (totalCells.size() > 0){
                cells = totalCells.findAll{it.getPathClass().toString().contains(aClass)}
                
                if (percentages) {annotation.getMeasurementList().putMeasurement("All "+aClass+" %", cells.size()*100/totalCells.size())}
                annotationArea = annotation.getROI().getScaledArea(cal.pixelWidth, cal.pixelHeight)
                if (densities) {annotation.getMeasurementList().putMeasurement("All "+aClass+" cells/mm^2", cells.size()/(annotationArea/1000000))}
            } else {
                if (percentages) {annotation.getMeasurementList().putMeasurement("All "+aClass+" %", 0)}
                if (densities) {annotation.getMeasurementList().putMeasurement("All "+aClass+" cells/mm^2", 0)}
            }

        }

    }
}

Class cell counts,percentages and density to parent annotation.groovy

//Checks for all detections within a given annotation, DOES NOT EXCLUDE DETECTIONS WITHIN SUB-ANNOTATIONS.
//That last bit should make it compatible with trained classifiers.
//0.1.2

//Do you want to include cell counts? If so, make True. This can cause duplicate measurements in 1.3 and beyond
COUNTS = false
import qupath.lib.objects.PathCellObject
imageData = getCurrentImageData()
server = imageData.getServer()
pixelSize = server.getPixelHeightMicrons()
Set classList = []
for (object in getAllObjects().findAll{it.isDetection() /*|| it.isAnnotation()*/}) {
    classList << object.getPathClass()
}
println(classList)
hierarchy = getCurrentHierarchy()

for (annotation in getAnnotationObjects()){
    totalCells = []
    totalCells = hierarchy.getDescendantObjects(annotation,null, PathCellObject)

    for (aClass in classList){
        if (aClass){
            if (totalCells.size() > 0){
                cells = hierarchy.getDescendantObjects(annotation,null, PathCellObject).findAll{it.getPathClass() == aClass}
                if(COUNTS){annotation.getMeasurementList().putMeasurement(aClass.getName()+" cells", cells.size())}
                annotation.getMeasurementList().putMeasurement(aClass.getName()+" %", cells.size()*100/totalCells.size())

                annotationArea = annotation.getROI().getArea()
                annotation.getMeasurementList().putMeasurement(aClass.getName()+" cells/mm^2", cells.size()/(annotationArea*pixelSize*pixelSize/1000000))
            } else {
                if(COUNTS){annotation.getMeasurementList().putMeasurement(aClass.getName()+" cells", 0)}
                annotation.getMeasurementList().putMeasurement(aClass.getName()+" %", 0)
                annotation.getMeasurementList().putMeasurement(aClass.getName()+" cells/mm^2", 0)
            
            }
        }
    }

}
println("done")

Class percentages to TMA measurements.groovy

// Add percentages by cell class to each TMA core, tested for 
//0.1.2

import qupath.lib.objects.PathCellObject
hierarchy = getCurrentHierarchy()
cores = hierarchy.getTMAGrid().getTMACoreList()
Set list = []

for (object in getAllObjects().findAll{it.isDetection() /*|| it.isAnnotation()*/}) {
    list << object.getPathClass().toString()
}

cores.each {
    //Find the cell count in this core
   total = hierarchy.getDescendantObjects(it, null, PathCellObject).size()
   //Prevent divide by zero errors in empty TMA cores
   if (total != 0){
      for (className in list) {
        cellType = hierarchy.getDescendantObjects(it,null, PathCellObject).findAll{it.getPathClass() == getPathClass(className)}.size()
        it.getMeasurementList().putMeasurement(className+" cell %", cellType/(total)*100)
      }
   }
   else {
     for (className in list) {
        it.getMeasurementList().putMeasurement(className+" cell %", 0)
     }
   }
}

Colocalization 0.1.2.groovy

//Version 3.1 Should work for 0.1.2 and 0.1.3

//****************VALUES TO EDIT***********//

//Channel numbers are based on cell measurement/channel order in Brightness/contrast menu, starting with 1
int FIRST_CHANNEL = 9
int SECOND_CHANNEL = 9

//CHOOSE ONE: "cell", "nucleus", "cytoplasm", "tile", "detection", "subcell"
//"detection" should be the equivalent of everything
String objectType = "cell"

//These should be figured out for a given sample to eliminate background signal
//Pixels below this value will not be considered for a given channel.
//Used for Manders coefficients only.
ch1Background = 100000
ch2Background = 100000

//***************NO TOUCHEE past here************//

import qupath.lib.regions.RegionRequest
import qupath.imagej.images.servers.ImagePlusServer
import qupath.imagej.images.servers.ImagePlusServerBuilder
import ij.process.ByteProcessor;
import ij.process.ImageProcessor;
import java.awt.image.BufferedImage
import ij.ImagePlus
import qupath.imagej.objects.ROIConverterIJ
import ij.process.ImageProcessor
import qupath.lib.roi.RectangleROI
import qupath.lib.images.servers.ImageServer
import qupath.lib.objects.PathObject
import qupath.imagej.helpers.IJTools
import qupath.lib.gui.ImageWriterTools

def imageData = getCurrentImageData()
def hierarchy = imageData.getHierarchy()

ImageServer<BufferedImage>  serverOriginal = imageData.getServer()
String path = serverOriginal.getPath()
double downsample = 1.0
def server = ImagePlusServerBuilder.ensureImagePlusWholeSlideServer(serverOriginal)



println("Running, please wait...")
//target the objects you want to analyze
if(objectType == "cell" || objectType == "nucleus" || objectType == "cytoplasm" ){detections = getCellObjects()}
if(objectType == "tile"){detections = getDetectionObjects().findAll{it.isTile()}}
if(objectType == "detection"){detections = getDetectionObjects()}
if(objectType == "subcell") {detections = getObjects({p-> p.class == qupath.imagej.detect.cells.SubcellularDetection.SubcellularObject.class})}



println("Count = "+ detections.size())

detections.each{
    //Get the bounding box region around the target detection
    roi = it.getROI()
    region = RegionRequest.createInstance(path, downsample, roi)
    imp = server.readImagePlusRegion(region).getImage()
    //Extract the first channel as a list of pixel values
    imp.setC(FIRST_CHANNEL)
    firstChanImage = imp.getProcessor()
    firstChanImage = firstChanImage.convertToFloatProcessor()  //Needed to handle big numbers
    ch1Pixels = firstChanImage.getPixels()
    //Create a mask so that only the pixels we want from the bounding box area are used in calculations
    bpSLICs = createObjectMask(firstChanImage, downsample, it, objectType).getPixels()
    
    //println(bpSLICs)
    //println(bpSLICs.getPixels())
    //println("ch1 size"+ch1.size())
    size = ch1Pixels.size()
    imp.setC(SECOND_CHANNEL)
    secondChanImage= imp.getProcessor()
    secondChanImage=secondChanImage.convertToFloatProcessor()
    ch2Pixels = secondChanImage.getPixels()
    //use mask to extract only the useful pixels into new lists
    //Maybe it would be faster to remove undesirable pixels instead?
    ch1 = []
    ch2 = []
    for (i=0; i<size; i++){
        if(bpSLICs[i]){
            ch1<<ch1Pixels[i]
            ch2<<ch2Pixels[i]
        }
    }
    
    //Calculating the mean for Pearson's
    ch1Premean = []
    ch2Premean = []    
    for (x in ch1) ch1Premean<<(x/ch1.size())
    for (x in ch2) ch2Premean<<(x/ch2.size())
    double ch1Mean = ch1Premean.sum()
    double ch2Mean = ch2Premean.sum()
    //get the new number of pixels to be analyzed
    size = ch1.size()
    
    //Create the sum for the top half of the pearson's correlation coefficient
    top = []
    for (i=0; i<size;i++){top << (ch1[i]-ch1Mean)*(ch2[i]-ch2Mean)}
    pearsonTop = top.sum()
    
    //Sums for the two bottom parts
    botCh1 = []
    for (i=0; i<size;i++){botCh1<< (ch1[i]-ch1Mean)*(ch1[i]-ch1Mean)}
    rootCh1 = Math.sqrt(botCh1.sum())
    
    botCh2 = []
    for (i=0; i<size;i++){botCh2 << (ch2[i]-ch2Mean)*(ch2[i]-ch2Mean)}
    rootCh2 = Math.sqrt(botCh2.sum())



    pearsonBot = rootCh2*rootCh1

    double pearson = pearsonTop/pearsonBot
    String name = "Pearson Corr "+FIRST_CHANNEL+"+"+SECOND_CHANNEL
    it.getMeasurementList().putMeasurement(name, pearson)

    //Start Manders calculations
    double m1Top = 0
    for (i=0; i<size;i++){if (ch2[i] > ch2Background){m1Top += Math.max(ch1[i]-ch1Background,0)}}
    double m1Bottom = 0
    for (i=0; i<size;i++){m1Bottom += Math.max(ch1[i]-ch1Background,0)}
    double m2Top = 0
    for (i=0; i<size;i++){if (ch1[i] > ch1Background){m2Top += Math.max(ch2[i]-ch2Background,0)}}
    double m2Bottom = 0
    for (i=0; i<size;i++){m2Bottom += Math.max(ch2[i]-ch2Background,0)}
    
    //Check for divide by zero and add measurements
    name = "M1 "+objectType+": ratio of Ch"+FIRST_CHANNEL+" intensity in Ch"+SECOND_CHANNEL+" areas"
    double M1 = m1Top/m1Bottom
    if (M1.isNaN()){M1 = 0}
    it.getMeasurementList().putMeasurement(name, M1)
    double M2 = m2Top/m2Bottom
    if (M2.isNaN()){M2 = 0}
    name = "M2 "+objectType+": ratio of Ch"+SECOND_CHANNEL+" intensity in Ch"+FIRST_CHANNEL+" areas"
    it.getMeasurementList().putMeasurement(name, M2)
}    

    
println("Done!")    

//Making a mask. Phantom of the Opera style.

def createObjectMask(ImageProcessor ip, double downsample, PathObject object, String objectType) {
    //create a byteprocessor that is the same size as the region we are analyzing
    def bp = new ByteProcessor(ip.getWidth(), ip.getHeight())
    //create a value to fill into the "good" area
    bp.setValue(1.0)

    //extract the ROI and shift the position so that it is within the stand-alone image region
    //Otherwise the coordinates are based off of the original image, and not just the small subsection we are analyzing
    if (objectType == "nucleus"){
        def roi = object.getNucleusROI()
        shift = roi.translate(ip.getWidth()/2-roi.getCentroidX(), ip.getHeight()/2-roi.getCentroidY())
        def roiIJ = ROIConverterIJ.convertToIJRoi(shift, 0, 0, downsample)
        bp.fill(roiIJ)
        
    }else if (objectType == "cytoplasm"){
        def nucleus = object.getNucleusROI()
        shiftNuc = nucleus.translate(ip.getWidth()/2-roi.getCentroidX(), ip.getHeight()/2-roi.getCentroidY())
        roiIJNuc = ROIConverterIJ.convertToIJRoi(shiftNuc, 0, 0, downsample)
        
        def roi = object.getROI()
        shift = roi.translate(ip.getWidth()/2-roi.getCentroidX(), ip.getHeight()/2-roi.getCentroidY())
        def roiIJ = ROIConverterIJ.convertToIJRoi(shift, 0, 0, downsample)
        bp.fill(roiIJ)
        bp.setValue(0)
        bp.fill(roiIJNuc)
        
    } else { 
        def roi = object.getROI()
        shift = roi.translate(ip.getWidth()/2-roi.getCentroidX(), ip.getHeight()/2-roi.getCentroidY())
        roiIJ = ROIConverterIJ.convertToIJRoi(shift, 0, 0, downsample)
        bp.fill(roiIJ)
    }

    
    //fill the ROI with the setValue to create the mask, the other values should be 0
    
    return bp
}

Colocalization of channels per detection 0.2.0.groovy

//0.2.0, but null pointer exception in certain image types. Have not been able to track it down.
//****************VALUES TO EDIT***********//

//Channel numbers are based on cell measurement/channel order in Brightness/contrast menu, starting with 1
int FIRST_CHANNEL = 2
int SECOND_CHANNEL = 3

//CHOOSE ONE: "cell", "nucleus", "cytoplasm", "tile", "detection", "subcell"
//"detection" should be the equivalent of everything
String objectType = "cell"

//These should be figured out for a given sample to eliminate background signal
//Pixels below this value will not be considered for a given channel.
//Used for Manders coefficients only.
ch1Background = 1000
ch2Background = 10000

//***************No touchee past here************//

import qupath.lib.regions.RegionRequest
import ij.process.ByteProcessor;
import ij.process.ImageProcessor;
import java.awt.image.BufferedImage
import qupath.imagej.tools.IJTools
import ij.process.ImageProcessor
import qupath.lib.images.servers.ImageServer
import qupath.lib.objects.PathObject
import qupath.lib.images.PathImage
import qupath.imagej.tools.PathImagePlus

def imageData = getCurrentImageData()
def hierarchy = imageData.getHierarchy()

def serverOriginal = imageData.getServer()
String path = serverOriginal.getPath()
double downsample = 1.0
ImageServer<BufferedImage> server = serverOriginal



println("Running, please wait...")
//target the objects you want to analyze
if(objectType == "cell" || objectType == "nucleus" || objectType == "cytoplasm" ){detections = getCellObjects()}
if(objectType == "tile"){detections = getDetectionObjects().findAll{it.isTile()}}
if(objectType == "detection"){detections = getDetectionObjects()}
if(objectType == "subcell") {detections = getObjects({p-> p.class == qupath.lib.objects.PathDetectionObject.class})}



println("Count = "+ detections.size())

detections.each{
    //Get the bounding box region around the target detection
    roi = it.getROI()
    request = RegionRequest.createInstance(path, downsample, roi)
    pathImage = IJTools.convertToImagePlus(server, request)
    imp = pathImage.getImage()
    //pathImage = PathImagePlus.createPathImage(imp, request)
    //imp.show()
    //imps = ij.plugin.ChannelSplitter.split(imp)
    
    //println(imp.getClass())
    //Extract the first channel as a list of pixel values
    //firstChanImage = imps[FIRST_CHANNEL-1]
    firstChanImage = imp.getProcessor(FIRST_CHANNEL)
    firstChanImage = firstChanImage.convertToFloatProcessor()  //Needed to handle big numbers
    ch1Pixels = firstChanImage.getPixels()
    //Create a mask so that only the pixels we want from the bounding box area are used in calculations
    bpSLICs = createObjectMask(pathImage, it, objectType).getPixels()
    
    //println(bpSLICs)
    //println(bpSLICs.getPixels())
    //println("ch1 size"+ch1.size())
    size = ch1Pixels.size()
    secondChanImage= imp.getProcessor(SECOND_CHANNEL)
    secondChanImage=secondChanImage.convertToFloatProcessor()
    ch2Pixels = secondChanImage.getPixels()
    //use mask to extract only the useful pixels into new lists
    //Maybe it would be faster to remove undesirable pixels instead?
    ch1 = []
    ch2 = []
    for (i=0; i<size; i++){
        if(bpSLICs[i]){
            ch1<<ch1Pixels[i]
            ch2<<ch2Pixels[i]
        }
    }
    /*
    println(ch1)
    println(ch2)
    println("ch1 size"+ch1.size())
    println("ch2 size"+ch2.size())

    println("ch1mean "+ch1Mean)
    println("ch2sum "+ch2.sum())
    println("ch2mean "+ch2Mean)
    */
    
    //Calculating the mean for Pearson's
    double ch1Mean = ch1.sum()/ch1.size()
    double ch2Mean = ch2.sum()/ch2.size()
    //get the new number of pixels to be analyzed
    size = ch1.size()
    
    //Create the sum for the top half of the pearson's correlation coefficient
    top = []
    for (i=0; i<size;i++){top << (ch1[i]-ch1Mean)*(ch2[i]-ch2Mean)}
    pearsonTop = top.sum()
    
    //Sums for the two bottom parts
    botCh1 = []
    for (i=0; i<size;i++){botCh1<< (ch1[i]-ch1Mean)*(ch1[i]-ch1Mean)}
    rootCh1 = Math.sqrt(botCh1.sum())
    
    botCh2 = []
    for (i=0; i<size;i++){botCh2 << (ch2[i]-ch2Mean)*(ch2[i]-ch2Mean)}
    rootCh2 = Math.sqrt(botCh2.sum())



    pearsonBot = rootCh2*rootCh1

    double pearson = pearsonTop/pearsonBot
    String name = "Pearson Corr "+objectType+":"+FIRST_CHANNEL+"+"+SECOND_CHANNEL
    it.getMeasurementList().putMeasurement(name, pearson)

    //Start Manders calculations
    double m1Top = 0
    for (i=0; i<size;i++){if (ch2[i] > ch2Background){m1Top += Math.max(ch1[i]-ch1Background,0)}}
    double m1Bottom = 0
    for (i=0; i<size;i++){m1Bottom += Math.max(ch1[i]-ch1Background,0)}
    double m2Top = 0
    for (i=0; i<size;i++){if (ch1[i] > ch1Background){m2Top += Math.max(ch2[i]-ch2Background,0)}}
    double m2Bottom = 0
    for (i=0; i<size;i++){m2Bottom += Math.max(ch2[i]-ch2Background,0)}
    
    //Check for divide by zero and add measurements
    name = "M1 "+objectType+": ratio of Ch"+FIRST_CHANNEL+" intensity in Ch"+SECOND_CHANNEL+" areas"
    double M1 = m1Top/m1Bottom
    if (M1.isNaN()){M1 = 0}
    it.getMeasurementList().putMeasurement(name, M1)
    double M2 = m2Top/m2Bottom
    if (M2.isNaN()){M2 = 0}
    name = "M2 "+objectType+": ratio of Ch"+SECOND_CHANNEL+" intensity in Ch"+FIRST_CHANNEL+" areas"
    it.getMeasurementList().putMeasurement(name, M2)
}    

    
println("Done!")    

//Making a mask. Phantom of the Opera style.

def createObjectMask(PathImage pathImage, PathObject object, String objectType) {
    //create a byteprocessor that is the same size as the region we are analyzing
    def bp = new ByteProcessor(pathImage.getImage().getWidth(), pathImage.getImage().getHeight())
    //create a value to fill into the "good" area
    bp.setValue(1.0)

    if (objectType == "nucleus"){
        def roi = object.getNucleusROI()
        def roiIJ = IJTools.convertToIJRoi(roi, pathImage)
        bp.fill(roiIJ)
        
    }else if (objectType == "cytoplasm"){
        def nucleus = object.getNucleusROI()
        roiIJNuc = IJTools.convertToIJRoi(nucleus, pathImage)
        def roi = object.getROI()
        //fill in the whole cell area
        def roiIJ = IJTools.convertToIJRoi(roi, pathImage)
        bp.fill(roiIJ)
        //remove the nucleus
        bp.setValue(0)
        bp.fill(roiIJNuc)
        
    } else { 
        def roi = object.getROI()
        roiIJ = IJTools.convertToIJRoi(roi, pathImage)
        bp.fill(roiIJ)
    }

    
    //fill the ROI with the setValue to create the mask, the other values should be 0
    
    return bp
}

Create detection measurements.groovy

//Generating measurements in detections from other measurements created in QuPath
//0.1.2 and 0.2.0
detections = getDetectionObjects()

detections.each{
    relativeDistribution2 = measurement(it, "ROI: 2.00 µm per pixel: Channel 2:  Mean")/measurement(it, "ROI: 2.00 µm per pixel: Channel 2:  Median")
    it.getMeasurementList().putMeasurement("RelativeCh2", relativeDistribution2)
}
println("done")

Detections - add full intensity measurements.groovy

// Remove this if you don't need to generate new cell intensity measurements (it may be quite slow)
// 0.2.0
//Original source https://forum.image.sc/t/stardist-qupath-cell-segmentation-transfer-on-aligned-image-set/45362/5
//With substitutions from @petebankhead and @mesencephalon

import qupath.lib.analysis.features.ObjectMeasurements
import qupath.lib.images.ImageData
import qupath.lib.images.servers.ImageServerMetadata
import qupath.lib.images.servers.TransformedServerBuilder

def imageData = getCurrentImageData()
def server = new TransformedServerBuilder(imageData.getServer())
    .deconvolveStains(imageData.getColorDeconvolutionStains())
    .build()
 // or server = getCurrentServer() //for IF   
def measurements = ObjectMeasurements.Measurements.values() as List
def compartments = ObjectMeasurements.Compartments.values() as List // Won't mean much if they aren't cells...
def downsample = 1.0
for (detection in getDetectionObjects()) {
  ObjectMeasurements.addIntensityMeasurements(
      server, detection, downsample, measurements, compartments
      )
}

Label cells by TMA core 2.groovy

//better way to label cells by TMA core
//0.1.2

hierarchy = getCurrentHierarchy()

hierarchy.getTMAGrid().getTMACoreList().each{
    coreName = it.getName()
    hierarchy.getDescendantObjects(it, null, qupath.lib.objects.PathCellObject).each{ c->
        c.setName(coreName)
    }
}

/* Version to specifically rename objects in annotations one level below the TMA.

hierarchy = getCurrentHierarchy()

hierarchy.getTMAGrid().getTMACoreList().each{
    coreName = it.getName()
    hierarchy.getDescendantObjects(it, null, qupath.lib.objects.PathCellObject).each{ c->
        if (c.getLevel() == 3){
            cellName = c.getPathClass().toString()
            print cellName
            c.setName(coreName+" - "+cellName)
        }
    }
}
*/

Label cells by TMA core.groovy

// label cells within an annotation within a TMA core by the TMA core, not the annotation.
// Remove one getParent if there is no tissue annotation.
// 0.1.2 and 0.2.0
getDetectionObjects() each {detection -> detection.setName(detection.getParent().getParent().getName())}
fireHierarchyUpdate()

Local cell density.groovy

//Objective: Find the number of neighbors within distance X
//Problem: Delaunay clusters exclude nearby cells if another cluster obscures those cells
// 0.2.0 - VERY SLOW

/**********Detection radius*************/
distanceMicrons = 25
/***************************************/

//Replace the next coding line with
//totalCells = getCellObjects().findAll{it.getPathClass() == getPathClass("Tumor"}
//to look at only one class (Tumor, in the above example) in the line below.
totalCells = getCellObjects()
print "please wait, this may take a long time"
totalCells.each{
    originalClass = it.getPathClass()
    it.setPathClass(getPathClass("DjdofiSdflKFj"))
    detectionCentroidDistances(false)
    closeCells = totalCells.findAll{measurement(it,"Distance to detection DjdofiSdflKFj µm") <= distanceMicrons && measurement(it,"Distance to detection DjdofiSdflKFj µm") != 0}
    it.getMeasurementList().putMeasurement("Cells within "+distanceMicrons+" microns", closeCells.size())
    it.setPathClass(originalClass)
}
removeMeasurements(qupath.lib.objects.PathCellObject, "Distance to detection DjdofiSdflKFj µm");

println("Done")

Metadata adjustement by script in 0.2.0.groovy

//Sometimes you need to set the metadata for a group of images, like TIFF files.
//0.2.0
//Other script is shorter!
import static qupath.lib.gui.scripting.QPEx.*
import qupath.lib.images.servers.ImageServerMetadata

def imageData = getCurrentImageData()
def server = imageData.getServer()

def oldMetadata = server.getMetadata()
def newMetadata = new ImageServerMetadata.Builder(oldMetadata)
    .magnification(10.0)
    .pixelSizeMicrons(1.25, 1.25)
    .build()
imageData.updateServerMetadata(newMetadata)

Metadata by script in 0.2.0.groovy

//https://forum.image.sc/t/script-for-sum-of-nucleaus-area-of-a-specific-annotation/36913/22

// Choose the actual values, not always 0.5!
setPixelSizeMicrons(0.5, 0.5)

Nearest Neighbors by Class.groovy

//Nearest neighbor between full classes. 0.2.0.
//Essentially replaced by "Detect centroid distances 2D" command.

//Would need modifications for base classes.
//Note, summary measurements are by default turned off. Uncomment the bottom section.
//Reason: with 27 classes this leads to over 700 annotation level summary measurements, YMMV

imageData = getCurrentImageData()
server = imageData.getServer()
def metadata = getCurrentImageData().getServer().getOriginalMetadata()
def pixelSize = metadata.pixelCalibration.pixelWidth.value
maxDist = Math.sqrt(server.getHeight()*server.getHeight()+server.getWidth()*server.getWidth())

classes = new ArrayList<>(getDetectionObjects().collect {it.getPathClass()?.getBaseClass()} as Set)
print "Classes found: " + classes.size()
cellsByClass = []

classes.each{c->
    cellsByClass << getCellObjects().findAll{it.getPathClass() == c}
}
print "Beginning calculations: This can be slow for large data sets, wait for 'Done' message to prevent errors."
def near = 0.0
for (i=0; i<classes.size(); i++){
    cellsByClass[i].each{c->
        nearest = []
        for (k=0; k<classes.size(); k++){
            near = maxDist
                //cycle through all cells of k Class finding the min distance
            cellsByClass[k].each{d->
                dist = Math.sqrt(( c.getNucleusROI().getCentroidX() - d.getNucleusROI().getCentroidX())*(c.getNucleusROI().getCentroidX() - d.getNucleusROI().getCentroidX())+( c.getNucleusROI().getCentroidY() - d.getNucleusROI().getCentroidY())*(c.getNucleusROI().getCentroidY() - d.getNucleusROI().getCentroidY()))
                if (dist > 0){
                    near = Math.min(near,dist)
                }
            }
            c.getMeasurementList().putMeasurement("Nearest "+ classes[k].toString(), near*pixelSize)
        }
    }
}
//Make measurements for Annotations
//This generates a MASSIVE list if you have many classes. Not recommended for export if there are more than 3-4 classes.
/*
getAnnotationObjects().each{anno->
    //Swap the below "classList" with "baseClasses" to get distances between all base classes
    classes.each{c->
        cellsOfOneType = anno.getChildObjects().findAll{it.getPathClass() == c}
        if (cellsOfOneType.size()>0){
        classes.each{s->
            currentTotal = 0
            cellsOfOneType.each{
                currentTotal += measurement(it, "Nearest "+ s.toString())
            }
            anno.getMeasurementList().putMeasurement("Mean distance in µm from "+s.toString()+" to nearest "+c.toString(),currentTotal/cellsOfOneType.size())
        }
    }}
}
*/

print "Done"

Nuclear and cytoplasmic color vector means.groovy

//Calculate the mean OD values in the nucleus and cytoplasm for any number of sets of color vectors 
//Intended for 0.1.2, there are easier ways to do this in 0.2.0 with the ability to choose Nucleus as the ROI for Add intensity features.
import qupath.lib.objects.*

//This function holds a list of color vectors and their Add Intensity Features command that will add the desired measurements
//to your cells.  Make sure you name the stains (for example in the first example, Stain 1 is called "Blue") differently
//so that their Measurements will end up labeled differently.  Notice that the Add Intensity Features command includes 
//"Colorstain":true, etc. which needs to be true for the measurements you wish to add.
  
def addColors(){
    setColorDeconvolutionStains('{"Name" : "DAB Yellow", "Stain 1" : "Blue", "Values 1" : "0.56477 0.65032 0.50806 ", "Stain 2" : "Yellow", "Values 2" : "0.0091 0.01316 0.99987 ", "Background" : " 255 255 255 "}');
    runPlugin('qupath.lib.algorithms.IntensityFeaturesPlugin', '{"pixelSizeMicrons": 0.25,  "region": "ROI",  "tileSizeMicrons": 25.0,  "colorOD": true,  "colorStain1": true,  "colorStain2": true,  "colorStain3": false,  "colorRed": false,  "colorGreen": false,  "colorBlue": false,  "colorHue": false,  "colorSaturation": false,  "colorBrightness": false,  "doMean": true,  "doStdDev": false,  "doMinMax": false,  "doMedian": false,  "doHaralick": false,  "haralickDistance": 1,  "haralickBins": 32}');

    setColorDeconvolutionStains('{"Name" : "Background1", "Stain 1" : "Blue Background1", "Values 1" : "0.56195 0.77393 0.29197 ", "Stain 2" : "Beige Background1", "Values 2" : "0.34398 0.59797 0.72396 ", "Background" : " 255 255 255 "}');
    runPlugin('qupath.lib.algorithms.IntensityFeaturesPlugin', '{"pixelSizeMicrons": 0.25,  "region": "ROI",  "tileSizeMicrons": 25.0,  "colorOD": false,  "colorStain1": true,  "colorStain2": true,  "colorStain3": false,  "colorRed": false,  "colorGreen": false,  "colorBlue": false,  "colorHue": false,  "colorSaturation": false,  "colorBrightness": false,  "doMean": true,  "doStdDev": false,  "doMinMax": false,  "doMedian": false,  "doHaralick": false,  "haralickDistance": 1,  "haralickBins": 32}');
}

//The only thing beyond this point that should need to be modified is the removalList command at the end, which you can disable
//if you wish to keep whole cell measurements

// Get cells & create temporary nucleus objects - storing link to cell in a map
def cells = getCellObjects()
def map = [:]
for (cell in cells) {
	def detection = new PathDetectionObject(cell.getNucleusROI())
	map[detection] = cell
}

// Get the nuclei as a list
def nuclei = map.keySet() as List
// and then select the nuclei
getCurrentHierarchy().getSelectionModel().setSelectedObjects(nuclei, null)

// Add as many sets of color deconvolution stains and Intensity features plugins as you want here
//This section ONLY adds measurements to the temporary nucleus objects, not the cell
addColors()

//etc etc. make sure each set has different names for the stains or else they will overwrite

// Don't need selection now
clearSelectedObjects()

// Can update measurements generated for the nucleus to the parent cell's measurement list
for (nucleus in nuclei) {
    def cell = map[nucleus]
    def cellMeasurements = cell.getMeasurementList()
    for (key in nucleus.getMeasurementList().getMeasurementNames()) {
        double value = nucleus.getMeasurementList().getMeasurementValue(key)
        def listOfStrings = key.tokenize(':')     
        def baseValueName = listOfStrings[-2]+listOfStrings[-1]
        nuclearName = "Nuclear" + baseValueName
        cellMeasurements.putMeasurement(nuclearName, value)
    }
    cellMeasurements.closeList()
}

//I want to remove the original whole cell measurements which contain the mu symbol
// Not yet sure I will find the whole cell useful so not adding it back in yet.
def removalList = []

//Create whole cell measurements for all of the above stains
selectDetections()

addColors()

//Create cytoplasmic measurements by subtracting the nuclear measurements from the whole cell, based total intensity (mean value*area)
for (cell in cells) {

   //A mess of things I could probably call within functions
   def cellMeasurements = cell.getMeasurementList()
   double cellArea = cell.getMeasurementList().getMeasurementValue("Cell: Area")
   double nuclearArea = cell.getMeasurementList().getMeasurementValue("Nucleus: Area")
   double cytoplasmicArea = cellArea-nuclearArea

   for (key in cell.getMeasurementList().getMeasurementNames()) {
           //check if the value is one of the added intensity measurements
        if (key.contains("per pixel")){
            //check if we already have this value in the list.
            //probably an easier way to do this outside of every cycle of the for loop
            if (!removalList.contains(key)) removalList<<key
            double value = cell.getMeasurementList().getMeasurementValue(key)
            //calculate the sum of the OD measurements
            cellOD = value * cellArea
            
            //break each measurement into component parts, then take the last two 
            // which will usually contain the color vector and "mean"
            def listOfStrings = key.tokenize(':')          
            def baseValueName = listOfStrings[-2]+listOfStrings[-1]
            //access the nuclear value version of the base name, and use it and the whole cell value to
            //calcuate the rough cytoplasmic value
            def cytoplasmicKey = "Cytopasmic" + baseValueName
            def nuclearKey = "Nuclear" + baseValueName
            def nuclearOD = nuclearArea * cell.getMeasurementList().getMeasurementValue(nuclearKey)

            def cytoplasmicValue = (cellOD - nuclearOD)/cytoplasmicArea
            cellMeasurements.putMeasurement(cytoplasmicKey, cytoplasmicValue)
        }
    }
    cellMeasurements.closeList()
}
removalList.each {println(it)}

//comment out this line if you want the whole cell measurements.
removalList.each {removeMeasurements(qupath.lib.objects.PathCellObject, it)}

fireHierarchyUpdate()
println "Done!"

Points are in which annotations.groovy

//0.1.2
//Overall purpose: Groups of points are a single point object, and are not recorded as measurements within annotation objects.
//This script takes a group of created points, and counts which are within certain annotation regions.
//https://forum.image.sc/t/manual-annotation-and-measurements/25051/5?u=research_associate


//Main script start
//Assumes Tumor and Peri-tumor regions have been created and classified.
//Assumes Nerve Cell objects per area have been created
//Assumes no unclassified annotations prior to creating script

pixelSize = getCurrentImageData().getServer().getPixelHeightMicrons()

stroma = getAnnotationObjects().findAll{it.getPathClass() == getPathClass("Stroma") && it.getROI().isArea()}

totalArea = 0
stroma.each{
    totalArea += it.getROI().getArea()
}
totalArea = totalArea*pixelSize*pixelSize
println("total stroma "+totalArea)

periTumorArea = 0
periTumor = getAnnotationObjects().findAll{it.getPathClass() == getPathClass("periTumor")&& it.getROI().isArea()}
periTumor.each{
    periTumorArea += it.getROI().getArea()
}
periTumorArea = periTumorArea*pixelSize*pixelSize
println("peritumor area "+periTumorArea)
tumorArea = 0
tumor = getAnnotationObjects().findAll{it.getPathClass() == getPathClass("Tumor")&& it.getROI().isArea()}
tumor.each{
    tumorArea += it.getROI().getArea()
}
tumorArea = tumorArea*pixelSize*pixelSize
println("tumor area "+tumorArea)

totalPeriTumorArea = periTumorArea - tumorArea
println("adjusted peritumor area "+totalPeriTumorArea)
totalStromalArea = totalArea - periTumorArea
println("adjusted stroma area"+ totalStromalArea)

points = getAnnotationObjects().findAll{it.isPoint() }

createSelectAllObject(true);
resultsSummary = getAnnotationObjects().findAll{it.getPathClass() == null}
resultsSummary[0].setPathClass(getPathClass("Results"))
resultsSummary[0].getMeasurementList().putMeasurement("Stroma Area um^2", totalStromalArea)
resultsSummary[0].getMeasurementList().putMeasurement("Tumor Area um^2", tumorArea)
resultsSummary[0].getMeasurementList().putMeasurement("Peri-Tumor Area um^2",totalPeriTumorArea)

tumorPoints = points.findAll{it.getPathClass() == getPathClass("Tumor")}

totalTumorPoints = 0
tumorPoints.each{totalTumorPoints += it.getROI().getPointList().size()}
println("tumor nerves"+totalTumorPoints)

stromaPoints = points.findAll{it.getPathClass() == getPathClass("Stroma")}
totalStromaPoints = 0
stromaPoints.each{totalStromaPoints += it.getROI().getPointList().size()}
println("stroma nerves"+totalStromaPoints)
periTumorPoints = points.findAll{it.getPathClass() == getPathClass("periTumor")}
totalPeriTumorPoints = 0
periTumorPoints.each{totalPeriTumorPoints += it.getROI().getPointList().size()}
println("peritumor nerves"+totalPeriTumorPoints)
resultsSummary[0].getMeasurementList().putMeasurement("Stroma Nerves per mm^2",1000000*totalStromaPoints/totalStromalArea)
resultsSummary[0].getMeasurementList().putMeasurement("Tumor Nerves per mm^2",1000000*totalTumorPoints/tumorArea)
resultsSummary[0].getMeasurementList().putMeasurement("Peri-Tumor Nerves per mm^2",1000000*totalPeriTumorPoints/totalPeriTumorArea)
getAnnotationObjects().each{it.setLocked(true)}
print "Done!"

Rsquared calculation.groovy

//Calculate the Rsquared value to look for linear relationships between two measurements.
//See complex scripts for a GUI and plots
//0.1.2 and 0.2.0

//Use the findAll statement to select specific classes of cells
//it.getPathClass() == getPathClass("Tumor")

cells = getCellObjects().findAll{it}
def points = new double [cells.size()-1][2]

for(i=0;i < cells.size()-1; i++){ 
   points[i][0] = measurement(cells[i], "Nucleus: Area");
   points[i][1] = measurement(cells[i], "Nucleus: Perimeter")
}
line = bestFit(points)


//bestFit snagged from
//https://blog.kenweiner.com/2008/12/groovy-best-fit-line.html
def bestFit(pts) {
  // Find sums of x, y, xy, x^2
  n = pts.size()
  xSum = pts.collect() {p -> p[0]}.sum()
  ySum = pts.collect() {p -> p[1]}.sum()
  xySum = pts.collect() {p -> p[0]*p[1]}.sum()
  xSqSum = pts.collect() {p -> p[0]*p[0]}.sum()

  // Find m and b such that y = mx + b
  // m is the slope of the line and b is the y-intercept
  m = (n*xySum - xSum*ySum) / (n*xSqSum - xSum*xSum)
  b = (ySum - m*xSum) / n

  // Find start and end points based on the left-most and right-most points
  x1 = pts.collect() {p -> p[0]}.min()
  y1 = m*x1 + b
  x2 = pts.collect() {p -> p[0]}.max()
  y2 = m*x2 + b

  [[x1, y1], [x2, y2]]
  println("slope :"+m+" intercept :"+b)
  line = [m,b,ySum]
  return (line)
}

meanY = line[2]/points.size()


pointError = []
lineError = []
for (i=0; i<cells.size()-1; i++){
    pointError << (points[i][1]-meanY)*(points[i][1]-meanY)
    lineError << (line[0]*points[i][0]+line[1] - meanY)*(line[0]*points[i][0]+line[1] - meanY)
}

println("R^2 = "+ lineError.sum()/pointError.sum())

Tile summary measurements to parent Annotation.groovy

//Checks for all detections within a given annotation, DOES NOT EXCLUDE DETECTIONS WITHIN SUB-ANNOTATIONS.
//That last bit should make it compatible with trained classifiers.
//0.1.2
import qupath.lib.objects.PathDetectionObject
def imageData = getCurrentImageData()
def server = imageData.getServer()
def pixelSize = server.getPixelHeightMicrons()
Set classList = []
for (object in getAllObjects().findAll{it.isDetection() /*|| it.isAnnotation()*/}) {
    classList << object.getPathClass()
}
println(classList)
hierarchy = getCurrentHierarchy()

for (annotation in getAnnotationObjects()){

    for (aClass in classList){
        if (aClass){
            def tiles = hierarchy.getDescendantObjects(annotation,null, PathDetectionObject).findAll{it.getPathClass() == aClass}
            double totalArea = 0
    
            for (def tile in tiles){
                totalArea += tile.getROI().getArea()
            }
            annotation.getMeasurementList().putMeasurement(aClass.getName()+" area px", totalArea)
            annotation.getMeasurementList().putMeasurement(aClass.getName()+" area um^2", totalArea*pixelSize*pixelSize)

            def annotationArea = annotation.getROI().getArea()
            annotation.getMeasurementList().putMeasurement(aClass.getName()+" area %", totalArea/annotationArea*100)
        }
    }

}
println("done")

Total subcellular intensity to cell value.groovy

// Save the total value of your subcellular detection intensities to the cell measurement list so that it may be exported
// with the cell, or used for classification
//0.1.2 and 0.2.0
// This value could then be divided by the total area of subcellular detection (Num spots, if Expected spot size is left as 1)
// for the mean intensity

// Create the name of the new measurement, in this case Channel 3 of a fluorescent image.
// ONLY the "Channel 3" should change to the name of the stain you are measuring, for example "DAB" in a brightfield image
def subcellularDetectionChannel = "Subcellular cluster: Channel 3: "

def newKey = subcellularDetectionChannel+"Mean Intensity"

//This step ensures that there is at least a measurement value of 0 in each cell
for (def cell : getCellObjects()) {
    def ml = cell.getMeasurementList()
    ml.putMeasurement(newKey, 0)

}
//Create a list of all subcellular objects
def subCells = getObjects({p -> p.class == qupath.imagej.detect.cells.SubcellularDetection.SubcellularObject.class})

// Loop through all subcellular detections
for (c in subCells) {
    // Find the containing cell
    def cell = c.getParent()
    def ml = cell.getMeasurementList()
    double area = c.getMeasurementList().getMeasurementValue( subcellularDetectionChannel+"Area")
    double intensity = c.getMeasurementList().getMeasurementValue( subcellularDetectionChannel+"Mean channel intensity")
    //calculate the total intensity of stain in this subcellular object, and add it to the total
    double stain = area*intensity
    double x = cell.getMeasurementList().getMeasurementValue(newKey);
    x = x+stain
    ml.putMeasurement(newKey, x)


}
println("Total subcellular stain intensity added to cell measurement list as " + newKey)