My in-progress documentation of the Monoprice Mini Delta V2 printer api. This is traffic captured between the included Wiibuilder application and the printer when you connect to the printer through Wiibuilder and send a gcode file to print.
api/printer during print job
{
| esphome: | |
| name: m5cam | |
| platform: ESP32 | |
| board: m5stack-core-esp32 | |
| wifi: | |
| ssid: "ssid" | |
| password: "password" | |
| # Enable logging |
| # esphome configuration for the TTGO T-Camera ESP32-WROVER-B | |
| # https://www.aliexpress.com/item/TTGO-T-Camera-ESP32-WROVER-B-PSRAM-Camera-Module-ESP32-WROVER-OV2640-Camera-Module-0-96/32966036489.html | |
| # I use this 3D-printed case for the device: | |
| # https://www.thingiverse.com/thing:3540059 | |
| esphome: | |
| name: woonkamer | |
| platform: ESP32 | |
| board: esp32dev |
| /** | |
| * BMW IBus Daemon reads BMW IBus data through serial port. It detects | |
| * BMW board monitor(at least BM53) unit and steering wheel button presses | |
| * from IBus data, maps them to key events and injects them to system event | |
| * queue via uinput. | |
| * | |
| * It also can be configured to inject key events only in certain state like | |
| * TAPE or AUX which can be useful if you want to hijack for example TAPE | |
| * mode for other use. | |
| * |