Skip to content

Instantly share code, notes, and snippets.

@scichelli
Created November 27, 2012 04:07
Show Gist options
  • Save scichelli/4152293 to your computer and use it in GitHub Desktop.
Save scichelli/4152293 to your computer and use it in GitHub Desktop.
Arduino example sketch controlling a servo motor
// Sweep
// by BARRAGAN <http://barraganstudio.com>
// This example code is in the public domain.
#include <Servo.h>
Servo myservo; // create servo object to control a servo
// a maximum of eight servo objects can be created
int pos = 0; // variable to store the servo position
void setup()
{
myservo.attach(9); // attaches the servo on pin 9 to the servo object
}
void loop()
{
for(pos = 0; pos < 180; pos += 1) // goes from 0 degrees to 180 degrees
{ // in steps of 1 degree
myservo.write(pos); // tell servo to go to position in variable 'pos'
delay(15); // waits 15ms for the servo to reach the position
}
for(pos = 180; pos>=1; pos-=1) // goes from 180 degrees to 0 degrees
{
myservo.write(pos); // tell servo to go to position in variable 'pos'
delay(15); // waits 15ms for the servo to reach the position
}
}
Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment