Skip to content

Instantly share code, notes, and snippets.

@scokmen
Created April 25, 2017 11:10
Show Gist options
  • Save scokmen/f813c904ef79022e84ab2409574d1b45 to your computer and use it in GitHub Desktop.
Save scokmen/f813c904ef79022e84ab2409574d1b45 to your computer and use it in GitHub Desktop.
Typescript Http Status Codes Enum
"use strict";
/**
* Hypertext Transfer Protocol (HTTP) response status codes.
* @see {@link https://en.wikipedia.org/wiki/List_of_HTTP_status_codes}
*/
enum HttpStatusCode {
/**
* The server has received the request headers and the client should proceed to send the request body
* (in the case of a request for which a body needs to be sent; for example, a POST request).
* Sending a large request body to a server after a request has been rejected for inappropriate headers would be inefficient.
* To have a server check the request's headers, a client must send Expect: 100-continue as a header in its initial request
* and receive a 100 Continue status code in response before sending the body. The response 417 Expectation Failed indicates the request should not be continued.
*/
CONTINUE = 100,
/**
* The requester has asked the server to switch protocols and the server has agreed to do so.
*/
SWITCHING_PROTOCOLS = 101,
/**
* A WebDAV request may contain many sub-requests involving file operations, requiring a long time to complete the request.
* This code indicates that the server has received and is processing the request, but no response is available yet.
* This prevents the client from timing out and assuming the request was lost.
*/
PROCESSING = 102,
/**
* Standard response for successful HTTP requests.
* The actual response will depend on the request method used.
* In a GET request, the response will contain an entity corresponding to the requested resource.
* In a POST request, the response will contain an entity describing or containing the result of the action.
*/
OK = 200,
/**
* The request has been fulfilled, resulting in the creation of a new resource.
*/
CREATED = 201,
/**
* The request has been accepted for processing, but the processing has not been completed.
* The request might or might not be eventually acted upon, and may be disallowed when processing occurs.
*/
ACCEPTED = 202,
/**
* SINCE HTTP/1.1
* The server is a transforming proxy that received a 200 OK from its origin,
* but is returning a modified version of the origin's response.
*/
NON_AUTHORITATIVE_INFORMATION = 203,
/**
* The server successfully processed the request and is not returning any content.
*/
NO_CONTENT = 204,
/**
* The server successfully processed the request, but is not returning any content.
* Unlike a 204 response, this response requires that the requester reset the document view.
*/
RESET_CONTENT = 205,
/**
* The server is delivering only part of the resource (byte serving) due to a range header sent by the client.
* The range header is used by HTTP clients to enable resuming of interrupted downloads,
* or split a download into multiple simultaneous streams.
*/
PARTIAL_CONTENT = 206,
/**
* The message body that follows is an XML message and can contain a number of separate response codes,
* depending on how many sub-requests were made.
*/
MULTI_STATUS = 207,
/**
* The members of a DAV binding have already been enumerated in a preceding part of the (multistatus) response,
* and are not being included again.
*/
ALREADY_REPORTED = 208,
/**
* The server has fulfilled a request for the resource,
* and the response is a representation of the result of one or more instance-manipulations applied to the current instance.
*/
IM_USED = 226,
/**
* Indicates multiple options for the resource from which the client may choose (via agent-driven content negotiation).
* For example, this code could be used to present multiple video format options,
* to list files with different filename extensions, or to suggest word-sense disambiguation.
*/
MULTIPLE_CHOICES = 300,
/**
* This and all future requests should be directed to the given URI.
*/
MOVED_PERMANENTLY = 301,
/**
* This is an example of industry practice contradicting the standard.
* The HTTP/1.0 specification (RFC 1945) required the client to perform a temporary redirect
* (the original describing phrase was "Moved Temporarily"), but popular browsers implemented 302
* with the functionality of a 303 See Other. Therefore, HTTP/1.1 added status codes 303 and 307
* to distinguish between the two behaviours. However, some Web applications and frameworks
* use the 302 status code as if it were the 303.
*/
FOUND = 302,
/**
* SINCE HTTP/1.1
* The response to the request can be found under another URI using a GET method.
* When received in response to a POST (or PUT/DELETE), the client should presume that
* the server has received the data and should issue a redirect with a separate GET message.
*/
SEE_OTHER = 303,
/**
* Indicates that the resource has not been modified since the version specified by the request headers If-Modified-Since or If-None-Match.
* In such case, there is no need to retransmit the resource since the client still has a previously-downloaded copy.
*/
NOT_MODIFIED = 304,
/**
* SINCE HTTP/1.1
* The requested resource is available only through a proxy, the address for which is provided in the response.
* Many HTTP clients (such as Mozilla and Internet Explorer) do not correctly handle responses with this status code, primarily for security reasons.
*/
USE_PROXY = 305,
/**
* No longer used. Originally meant "Subsequent requests should use the specified proxy."
*/
SWITCH_PROXY = 306,
/**
* SINCE HTTP/1.1
* In this case, the request should be repeated with another URI; however, future requests should still use the original URI.
* In contrast to how 302 was historically implemented, the request method is not allowed to be changed when reissuing the original request.
* For example, a POST request should be repeated using another POST request.
*/
TEMPORARY_REDIRECT = 307,
/**
* The request and all future requests should be repeated using another URI.
* 307 and 308 parallel the behaviors of 302 and 301, but do not allow the HTTP method to change.
* So, for example, submitting a form to a permanently redirected resource may continue smoothly.
*/
PERMANENT_REDIRECT = 308,
/**
* The server cannot or will not process the request due to an apparent client error
* (e.g., malformed request syntax, too large size, invalid request message framing, or deceptive request routing).
*/
BAD_REQUEST = 400,
/**
* Similar to 403 Forbidden, but specifically for use when authentication is required and has failed or has not yet
* been provided. The response must include a WWW-Authenticate header field containing a challenge applicable to the
* requested resource. See Basic access authentication and Digest access authentication. 401 semantically means
* "unauthenticated",i.e. the user does not have the necessary credentials.
*/
UNAUTHORIZED = 401,
/**
* Reserved for future use. The original intention was that this code might be used as part of some form of digital
* cash or micro payment scheme, but that has not happened, and this code is not usually used.
* Google Developers API uses this status if a particular developer has exceeded the daily limit on requests.
*/
PAYMENT_REQUIRED = 402,
/**
* The request was valid, but the server is refusing action.
* The user might not have the necessary permissions for a resource.
*/
FORBIDDEN = 403,
/**
* The requested resource could not be found but may be available in the future.
* Subsequent requests by the client are permissible.
*/
NOT_FOUND = 404,
/**
* A request method is not supported for the requested resource;
* for example, a GET request on a form that requires data to be presented via POST, or a PUT request on a read-only resource.
*/
METHOD_NOT_ALLOWED = 405,
/**
* The requested resource is capable of generating only content not acceptable according to the Accept headers sent in the request.
*/
NOT_ACCEPTABLE = 406,
/**
* The client must first authenticate itself with the proxy.
*/
PROXY_AUTHENTICATION_REQUIRED = 407,
/**
* The server timed out waiting for the request.
* According to HTTP specifications:
* "The client did not produce a request within the time that the server was prepared to wait. The client MAY repeat the request without modifications at any later time."
*/
REQUEST_TIMEOUT = 408,
/**
* Indicates that the request could not be processed because of conflict in the request,
* such as an edit conflict between multiple simultaneous updates.
*/
CONFLICT = 409,
/**
* Indicates that the resource requested is no longer available and will not be available again.
* This should be used when a resource has been intentionally removed and the resource should be purged.
* Upon receiving a 410 status code, the client should not request the resource in the future.
* Clients such as search engines should remove the resource from their indices.
* Most use cases do not require clients and search engines to purge the resource, and a "404 Not Found" may be used instead.
*/
GONE = 410,
/**
* The request did not specify the length of its content, which is required by the requested resource.
*/
LENGTH_REQUIRED = 411,
/**
* The server does not meet one of the preconditions that the requester put on the request.
*/
PRECONDITION_FAILED = 412,
/**
* The request is larger than the server is willing or able to process. Previously called "Request Entity Too Large".
*/
PAYLOAD_TOO_LARGE = 413,
/**
* The URI provided was too long for the server to process. Often the result of too much data being encoded as a query-string of a GET request,
* in which case it should be converted to a POST request.
* Called "Request-URI Too Long" previously.
*/
URI_TOO_LONG = 414,
/**
* The request entity has a media type which the server or resource does not support.
* For example, the client uploads an image as image/svg+xml, but the server requires that images use a different format.
*/
UNSUPPORTED_MEDIA_TYPE = 415,
/**
* The client has asked for a portion of the file (byte serving), but the server cannot supply that portion.
* For example, if the client asked for a part of the file that lies beyond the end of the file.
* Called "Requested Range Not Satisfiable" previously.
*/
RANGE_NOT_SATISFIABLE = 416,
/**
* The server cannot meet the requirements of the Expect request-header field.
*/
EXPECTATION_FAILED = 417,
/**
* This code was defined in 1998 as one of the traditional IETF April Fools' jokes, in RFC 2324, Hyper Text Coffee Pot Control Protocol,
* and is not expected to be implemented by actual HTTP servers. The RFC specifies this code should be returned by
* teapots requested to brew coffee. This HTTP status is used as an Easter egg in some websites, including Google.com.
*/
I_AM_A_TEAPOT = 418,
/**
* The request was directed at a server that is not able to produce a response (for example because a connection reuse).
*/
MISDIRECTED_REQUEST = 421,
/**
* The request was well-formed but was unable to be followed due to semantic errors.
*/
UNPROCESSABLE_ENTITY = 422,
/**
* The resource that is being accessed is locked.
*/
LOCKED = 423,
/**
* The request failed due to failure of a previous request (e.g., a PROPPATCH).
*/
FAILED_DEPENDENCY = 424,
/**
* The client should switch to a different protocol such as TLS/1.0, given in the Upgrade header field.
*/
UPGRADE_REQUIRED = 426,
/**
* The origin server requires the request to be conditional.
* Intended to prevent "the 'lost update' problem, where a client
* GETs a resource's state, modifies it, and PUTs it back to the server,
* when meanwhile a third party has modified the state on the server, leading to a conflict."
*/
PRECONDITION_REQUIRED = 428,
/**
* The user has sent too many requests in a given amount of time. Intended for use with rate-limiting schemes.
*/
TOO_MANY_REQUESTS = 429,
/**
* The server is unwilling to process the request because either an individual header field,
* or all the header fields collectively, are too large.
*/
REQUEST_HEADER_FIELDS_TOO_LARGE = 431,
/**
* A server operator has received a legal demand to deny access to a resource or to a set of resources
* that includes the requested resource. The code 451 was chosen as a reference to the novel Fahrenheit 451.
*/
UNAVAILABLE_FOR_LEGAL_REASONS = 451,
/**
* A generic error message, given when an unexpected condition was encountered and no more specific message is suitable.
*/
INTERNAL_SERVER_ERROR = 500,
/**
* The server either does not recognize the request method, or it lacks the ability to fulfill the request.
* Usually this implies future availability (e.g., a new feature of a web-service API).
*/
NOT_IMPLEMENTED = 501,
/**
* The server was acting as a gateway or proxy and received an invalid response from the upstream server.
*/
BAD_GATEWAY = 502,
/**
* The server is currently unavailable (because it is overloaded or down for maintenance).
* Generally, this is a temporary state.
*/
SERVICE_UNAVAILABLE = 503,
/**
* The server was acting as a gateway or proxy and did not receive a timely response from the upstream server.
*/
GATEWAY_TIMEOUT = 504,
/**
* The server does not support the HTTP protocol version used in the request
*/
HTTP_VERSION_NOT_SUPPORTED = 505,
/**
* Transparent content negotiation for the request results in a circular reference.
*/
VARIANT_ALSO_NEGOTIATES = 506,
/**
* The server is unable to store the representation needed to complete the request.
*/
INSUFFICIENT_STORAGE = 507,
/**
* The server detected an infinite loop while processing the request.
*/
LOOP_DETECTED = 508,
/**
* Further extensions to the request are required for the server to fulfill it.
*/
NOT_EXTENDED = 510,
/**
* The client needs to authenticate to gain network access.
* Intended for use by intercepting proxies used to control access to the network (e.g., "captive portals" used
* to require agreement to Terms of Service before granting full Internet access via a Wi-Fi hotspot).
*/
NETWORK_AUTHENTICATION_REQUIRED = 511
}
export default HttpStatusCode;
@redmatrice
Copy link

thank you very much for this, it will help

i Edited it because i wanted to be able to search (autocomplete) by name or code at the same time, because sometimes i just remember the code.

"use strict";

/**
 * Hypertext Transfer Protocol (HTTP) response status codes.
 * @see {@link https://en.wikipedia.org/wiki/List_of_HTTP_status_codes}
 */
enum HttpStatusCode {

    /**
     * The server has received the request headers and the client should proceed to send the request body
     * (in the case of a request for which a body needs to be sent; for example, a POST request).
     * Sending a large request body to a server after a request has been rejected for inappropriate headers would be inefficient.
     * To have a server check the request's headers, a client must send Expect: 100-continue as a header in its initial request
     * and receive a 100 Continue status code in response before sending the body. The response 417 Expectation Failed indicates the request should not be continued.
     */
    CONTINUE_100 = 100,

    /**
     * The requester has asked the server to switch protocols and the server has agreed to do so.
     */
    SWITCHING_PROTOCOLS_101 = 101,

    /**
     * A WebDAV request may contain many sub-requests involving file operations, requiring a long time to complete the request.
     * This code indicates that the server has received and is processing the request, but no response is available yet.
     * This prevents the client from timing out and assuming the request was lost.
     */
    PROCESSING_102 = 102,

    /**
     * Standard response for successful HTTP requests.
     * The actual response will depend on the request method used.
     * In a GET request, the response will contain an entity corresponding to the requested resource.
     * In a POST request, the response will contain an entity describing or containing the result of the action.
     */
    OK_200 = 200,

    /**
     * The request has been fulfilled, resulting in the creation of a new resource.
     */
    CREATED_201 = 201,

    /**
     * The request has been accepted for processing, but the processing has not been completed.
     * The request might or might not be eventually acted upon, and may be disallowed when processing occurs.
     */
    ACCEPTED_202 = 202,

    /**
     * SINCE HTTP/1.1
     * The server is a transforming proxy that received a 200 OK from its origin,
     * but is returning a modified version of the origin's response.
     */
    NON_AUTHORITATIVE_INFORMATION_203 = 203,

    /**
     * The server successfully processed the request and is not returning any content.
     */
    NO_CONTENT_204 = 204,

    /**
     * The server successfully processed the request, but is not returning any content.
     * Unlike a 204 response, this response requires that the requester reset the document view.
     */
    RESET_CONTENT_205 = 205,

    /**
     * The server is delivering only part of the resource (byte serving) due to a range header sent by the client.
     * The range header is used by HTTP clients to enable resuming of interrupted downloads,
     * or split a download into multiple simultaneous streams.
     */
    PARTIAL_CONTENT_206 = 206,

    /**
     * The message body that follows is an XML message and can contain a number of separate response codes,
     * depending on how many sub-requests were made.
     */
    MULTI_STATUS_207 = 207,

    /**
     * The members of a DAV binding have already been enumerated in a preceding part of the (multistatus) response,
     * and are not being included again.
     */
    ALREADY_REPORTED_208 = 208,

    /**
     * The server has fulfilled a request for the resource,
     * and the response is a representation of the result of one or more instance-manipulations applied to the current instance.
     */
    IM_USED_226 = 226,

    /**
     * Indicates multiple options for the resource from which the client may choose (via agent-driven content negotiation).
     * For example, this code could be used to present multiple video format options,
     * to list files with different filename extensions, or to suggest word-sense disambiguation.
     */
    MULTIPLE_CHOICES_300 = 300,

    /**
     * This and all future requests should be directed to the given URI.
     */
    MOVED_PERMANENTLY_301 = 301,

    /**
     * This is an example of industry practice contradicting the standard.
     * The HTTP/1.0 specification (RFC 1945) required the client to perform a temporary redirect
     * (the original describing phrase was "Moved Temporarily"), but popular browsers implemented 302
     * with the functionality of a 303 See Other. Therefore, HTTP/1.1 added status codes 303 and 307
     * to distinguish between the two behaviours. However, some Web applications and frameworks
     * use the 302 status code as if it were the 303.
     */
    FOUND_302 = 302,

    /**
     * SINCE HTTP/1.1
     * The response to the request can be found under another URI using a GET method.
     * When received in response to a POST (or PUT/DELETE), the client should presume that
     * the server has received the data and should issue a redirect with a separate GET message.
     */
    SEE_OTHER_303 = 303,

    /**
     * Indicates that the resource has not been modified since the version specified by the request headers If-Modified-Since or If-None-Match.
     * In such case, there is no need to retransmit the resource since the client still has a previously-downloaded copy.
     */
    NOT_MODIFIED_304 = 304,

    /**
     * SINCE HTTP/1.1
     * The requested resource is available only through a proxy, the address for which is provided in the response.
     * Many HTTP clients (such as Mozilla and Internet Explorer) do not correctly handle responses with this status code, primarily for security reasons.
     */
    USE_PROXY_305 = 305,

    /**
     * No longer used. Originally meant "Subsequent requests should use the specified proxy."
     */
    SWITCH_PROXY_306 = 306,

    /**
     * SINCE HTTP/1.1
     * In this case, the request should be repeated with another URI; however, future requests should still use the original URI.
     * In contrast to how 302 was historically implemented, the request method is not allowed to be changed when reissuing the original request.
     * For example, a POST request should be repeated using another POST request.
     */
    TEMPORARY_REDIRECT_307 = 307,

    /**
     * The request and all future requests should be repeated using another URI.
     * 307 and 308 parallel the behaviors of 302 and 301, but do not allow the HTTP method to change.
     * So, for example, submitting a form to a permanently redirected resource may continue smoothly.
     */
    PERMANENT_REDIRECT_308 = 308,

    /**
     * The server cannot or will not process the request due to an apparent client error
     * (e.g., malformed request syntax, too large size, invalid request message framing, or deceptive request routing).
     */
    BAD_REQUEST_400 = 400,

    /**
     * Similar to 403 Forbidden, but specifically for use when authentication is required and has failed or has not yet
     * been provided. The response must include a WWW-Authenticate header field containing a challenge applicable to the
     * requested resource. See Basic access authentication and Digest access authentication. 401 semantically means
     * "unauthenticated",i.e. the user does not have the necessary credentials.
     */
    UNAUTHORIZED_401 = 401,

    /**
     * Reserved for future use. The original intention was that this code might be used as part of some form of digital
     * cash or micro payment scheme, but that has not happened, and this code is not usually used.
     * Google Developers API uses this status if a particular developer has exceeded the daily limit on requests.
     */
    PAYMENT_REQUIRED_402 = 402,

    /**
     * The request was valid, but the server is refusing action.
     * The user might not have the necessary permissions for a resource.
     */
    FORBIDDEN_403 = 403,

    /**
     * The requested resource could not be found but may be available in the future.
     * Subsequent requests by the client are permissible.
     */
    NOT_FOUND_404 = 404,

    /**
     * A request method is not supported for the requested resource;
     * for example, a GET request on a form that requires data to be presented via POST, or a PUT request on a read-only resource.
     */
    METHOD_NOT_ALLOWED_405 = 405,

    /**
     * The requested resource is capable of generating only content not acceptable according to the Accept headers sent in the request.
     */
    NOT_ACCEPTABLE_406 = 406,

    /**
     * The client must first authenticate itself with the proxy.
     */
    PROXY_AUTHENTICATION_REQUIRED_407 = 407,

    /**
     * The server timed out waiting for the request.
     * According to HTTP specifications:
     * "The client did not produce a request within the time that the server was prepared to wait. The client MAY repeat the request without modifications at any later time."
     */
    REQUEST_TIMEOUT_408 = 408,

    /**
     * Indicates that the request could not be processed because of conflict in the request,
     * such as an edit conflict between multiple simultaneous updates.
     */
    CONFLICT_409 = 409,

    /**
     * Indicates that the resource requested is no longer available and will not be available again.
     * This should be used when a resource has been intentionally removed and the resource should be purged.
     * Upon receiving a 410 status code, the client should not request the resource in the future.
     * Clients such as search engines should remove the resource from their indices.
     * Most use cases do not require clients and search engines to purge the resource, and a "404 Not Found" may be used instead.
     */
    GONE_410 = 410,

    /**
     * The request did not specify the length of its content, which is required by the requested resource.
     */
    LENGTH_REQUIRED_411 = 411,

    /**
     * The server does not meet one of the preconditions that the requester put on the request.
     */
    PRECONDITION_FAILED_412 = 412,

    /**
     * The request is larger than the server is willing or able to process. Previously called "Request Entity Too Large".
     */
    PAYLOAD_TOO_LARGE_413 = 413,

    /**
     * The URI provided was too long for the server to process. Often the result of too much data being encoded as a query-string of a GET request,
     * in which case it should be converted to a POST request.
     * Called "Request-URI Too Long" previously.
     */
    URI_TOO_LONG_414 = 414,

    /**
     * The request entity has a media type which the server or resource does not support.
     * For example, the client uploads an image as image/svg+xml, but the server requires that images use a different format.
     */
    UNSUPPORTED_MEDIA_TYPE_415 = 415,

    /**
     * The client has asked for a portion of the file (byte serving), but the server cannot supply that portion.
     * For example, if the client asked for a part of the file that lies beyond the end of the file.
     * Called "Requested Range Not Satisfiable" previously.
     */
    RANGE_NOT_SATISFIABLE_416 = 416,

    /**
     * The server cannot meet the requirements of the Expect request-header field.
     */
    EXPECTATION_FAILED_417 = 417,

    /**
     * This code was defined in 1998 as one of the traditional IETF April Fools' jokes, in RFC 2324, Hyper Text Coffee Pot Control Protocol,
     * and is not expected to be implemented by actual HTTP servers. The RFC specifies this code should be returned by
     * teapots requested to brew coffee. This HTTP status is used as an Easter egg in some websites, including Google.com.
     */
    I_AM_A_TEAPOT_418 = 418,

    /**
     * The request was directed at a server that is not able to produce a response (for example because a connection reuse).
     */
    MISDIRECTED_REQUEST_421 = 421,

    /**
     * The request was well-formed but was unable to be followed due to semantic errors.
     */
    UNPROCESSABLE_ENTITY_422 = 422,

    /**
     * The resource that is being accessed is locked.
     */
    LOCKED_423 = 423,

    /**
     * The request failed due to failure of a previous request (e.g., a PROPPATCH).
     */
    FAILED_DEPENDENCY_424 = 424,

    /**
     * The client should switch to a different protocol such as TLS/1.0, given in the Upgrade header field.
     */
    UPGRADE_REQUIRED_426 = 426,

    /**
     * The origin server requires the request to be conditional.
     * Intended to prevent "the 'lost update' problem, where a client
     * GETs a resource's state, modifies it, and PUTs it back to the server,
     * when meanwhile a third party has modified the state on the server, leading to a conflict."
     */
    PRECONDITION_REQUIRED_428 = 428,

    /**
     * The user has sent too many requests in a given amount of time. Intended for use with rate-limiting schemes.
     */
    TOO_MANY_REQUESTS_429 = 429,

    /**
     * The server is unwilling to process the request because either an individual header field,
     * or all the header fields collectively, are too large.
     */
    REQUEST_HEADER_FIELDS_TOO_LARGE_431 = 431,

    /**
     * A server operator has received a legal demand to deny access to a resource or to a set of resources
     * that includes the requested resource. The code 451 was chosen as a reference to the novel Fahrenheit 451.
     */
    UNAVAILABLE_FOR_LEGAL_REASONS_451 = 451,

    /**
     * A generic error message, given when an unexpected condition was encountered and no more specific message is suitable.
     */
    INTERNAL_SERVER_ERROR_500 = 500,

    /**
     * The server either does not recognize the request method, or it lacks the ability to fulfill the request.
     * Usually this implies future availability (e.g., a new feature of a web-service API).
     */
    NOT_IMPLEMENTED_501 = 501,

    /**
     * The server was acting as a gateway or proxy and received an invalid response from the upstream server.
     */
    BAD_GATEWAY_502 = 502,

    /**
     * The server is currently unavailable (because it is overloaded or down for maintenance).
     * Generally, this is a temporary state.
     */
    SERVICE_UNAVAILABLE_503 = 503,

    /**
     * The server was acting as a gateway or proxy and did not receive a timely response from the upstream server.
     */
    GATEWAY_TIMEOUT_504 = 504,

    /**
     * The server does not support the HTTP protocol version used in the request
     */
    HTTP_VERSION_NOT_SUPPORTED_505 = 505,

    /**
     * Transparent content negotiation for the request results in a circular reference.
     */
    VARIANT_ALSO_NEGOTIATES_506 = 506,

    /**
     * The server is unable to store the representation needed to complete the request.
     */
    INSUFFICIENT_STORAGE_507 = 507,

    /**
     * The server detected an infinite loop while processing the request.
     */
    LOOP_DETECTED_508 = 508,

    /**
     * Further extensions to the request are required for the server to fulfill it.
     */
    NOT_EXTENDED_510 = 510,

    /**
     * The client needs to authenticate to gain network access.
     * Intended for use by intercepting proxies used to control access to the network (e.g., "captive portals" used
     * to require agreement to Terms of Service before granting full Internet access via a Wi-Fi hotspot).
     */
    NETWORK_AUTHENTICATION_REQUIRED_511 = 511
}

export default HttpStatusCode;

@brunoluan7
Copy link

Thanks a lot, @scokmen! 👍

@c4nzin
Copy link

c4nzin commented Jun 6, 2023

danke

Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment