Skip to content

Instantly share code, notes, and snippets.

@scottellis
Created May 4, 2012 18:17
Show Gist options
  • Save scottellis/2596710 to your computer and use it in GitHub Desktop.
Save scottellis/2596710 to your computer and use it in GitHub Desktop.
yocto-overo-3.2-dmesg
U-Boot SPL 2011.12-00017-gb48a523 (May 04 2012 - 10:19:39)
OMAP SD/MMC: 0
reading u-boot.img
reading u-boot.img
U-Boot 2011.12-00017-gb48a523 (May 04 2012 - 10:19:39)
OMAP3530-GP ES3.1, CPU-OPP2, L3-165MHz, Max CPU Clock 720 mHz
Gumstix Overo board + LPDDR/NAND
I2C: ready
DRAM: 256 MiB
NAND: 256 MiB
MMC: OMAP SD/MMC: 0
In: serial
Out: serial
Err: serial
Board revision: 0
Direct connection on mmc2
No EEPROM on expansion board
Die ID #193e00040000000004037f680c022007
Net: smc911x-0
Hit any key to stop autoboot: 0
reading boot.scr
251 bytes read
Running bootscript from mmc ...
## Executing script at 82000000
reading uImage
3361792 bytes read
## Booting kernel from Legacy Image at 82000000 ...
Image Name: Linux-3.2.0
Image Type: ARM Linux Kernel Image (uncompressed)
Data Size: 3361728 Bytes = 3.2 MiB
Load Address: 80008000
Entry Point: 80008000
Verifying Checksum ... OK
Loading Kernel Image ... OK
OK
Starting kernel ...
Uncompressing Linux... done, booting the kernel.
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Linux version 3.2.0 (scott@quad) (gcc version 4.7.1 20120421 (prerelease) (GCC) ) #1 PREEMPT Fri May 4 09:50:37 EDT 2012
CPU: ARMv7 Processor [411fc083] revision 3 (ARMv7), cr=10c53c7d
CPU: PIPT / VIPT nonaliasing data cache, VIPT nonaliasing instruction cache
Machine: Gumstix Overo
Reserving 12582912 bytes SDRAM for VRAM
Memory policy: ECC disabled, Data cache writeback
OMAP3430/3530 ES3.1 (l2cache iva sgx neon isp 720mhz )
Clocking rate (Crystal/Core/MPU): 26.0/332/500 MHz
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 61952
Kernel command line: console=ttyO2,115200n8 mpurate=500 root=/dev/mmcblk0p2 rw rootfstype=ext3 rootwait
PID hash table entries: 1024 (order: 0, 4096 bytes)
Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
allocated 1048576 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
Memory: 244MB = 244MB total
Memory: 239088k/239088k available, 23056k reserved, 0K highmem
Virtual kernel memory layout:
vector : 0xffff0000 - 0xffff1000 ( 4 kB)
fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
vmalloc : 0xd0800000 - 0xf8000000 ( 632 MB)
lowmem : 0xc0000000 - 0xd0000000 ( 256 MB)
pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
.text : 0xc0008000 - 0xc062ced8 (6292 kB)
.init : 0xc062d000 - 0xc0661000 ( 208 kB)
.data : 0xc0662000 - 0xc06ba300 ( 353 kB)
.bss : 0xc06ba324 - 0xc07474a4 ( 565 kB)
NR_IRQS:410
IRQ: Found an INTC at 0xfa200000 (revision 4.0) with 96 interrupts
Total of 96 interrupts on 1 active controller
OMAP clockevent source: GPTIMER1 at 32768 Hz
sched_clock: 32 bits at 32kHz, resolution 30517ns, wraps every 131071999ms
Console: colour dummy device 80x30
Calibrating delay loop... 497.82 BogoMIPS (lpj=1941504)
pid_max: default: 32768 minimum: 301
Mount-cache hash table entries: 512
Initializing cgroup subsys debug
Initializing cgroup subsys cpuacct
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys perf_event
CPU: Testing write buffer coherency: ok
devtmpfs: initialized
print_constraints: dummy:
NET: Registered protocol family 16
GPMC revision 5.0
OMAP GPIO hardware version 2.5
omap_mux_init: Add partition: #1: core, flags: 0
Reprogramming SDRC clock to 332000000 Hz
dpll3_m2_clk rate change failed: -22
Found NAND on CS0
Registering NAND on CS0
platform iva.0: Enabled OPP corresponding to 720MHz
hw-breakpoint: debug architecture 0x4 unsupported.
omap-mcbsp.2: alias fck already exists
omap-mcbsp.3: alias fck already exists
Calibrating delay loop (skipped) already calibrated this CPU
Switched to new clocking rate (Crystal/Core/MPU): 26.0/332/500 MHz
OMAP DMA hardware revision 4.0
bio: create slab <bio-0> at 0
print_constraints: vads7846: 3300 mV
SCSI subsystem initialized
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
omap_i2c omap_i2c.1: bus 1 rev1.3.12 at 2600 kHz
twl4030: PIH (irq 7) chaining IRQs 368..375
twl4030: power (irq 373) chaining IRQs 376..383
twl4030: gpio (irq 368) chaining IRQs 384..401
print_constraints: VUSB1V5: 1500 mV normal standby
print_constraints: VUSB1V8: 1800 mV normal standby
print_constraints: VUSB3V1: 3100 mV normal standby
twl4030_usb twl4030_usb: Initialized TWL4030 USB module
print_constraints: VMMC1: 1850 <--> 3150 mV at 3150 mV normal standby
print_constraints: VDAC: 1800 mV normal standby
print_constraints: VDVI: 1800 mV normal standby
omap_i2c omap_i2c.3: bus 3 rev1.3.12 at 400 kHz
Advanced Linux Sound Architecture Driver Version 1.0.24.
Switching to clocksource 32k_counter
musb-hdrc: version 6.0, ?dma?, otg (peripheral+host)
musb-hdrc musb-hdrc: USB OTG mode controller at fa0ab000 using DMA, IRQ 92
NET: Registered protocol family 2
IP route cache hash table entries: 2048 (order: 1, 8192 bytes)
TCP established hash table entries: 8192 (order: 4, 65536 bytes)
TCP bind hash table entries: 8192 (order: 3, 32768 bytes)
TCP: Hash tables configured (established 8192 bind 8192)
TCP reno registered
UDP hash table entries: 256 (order: 0, 4096 bytes)
UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
NET: Registered protocol family 1
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
platform iva.0: Enabled OPP corresponding to 720MHz
audit: initializing netlink socket (disabled)
type=2000 audit(0.148:1): initialized
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
Registering unionfs 2.5.10 (for 3.1.0-rc4)
JFFS2 version 2.2. (NAND) (SUMMARY) © 2001-2006 Red Hat, Inc.
fuse init (API version 7.17)
msgmni has been set to 466
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
io scheduler noop registered
io scheduler deadline registered (default)
OMAP DSS rev 2.0
omap_uart.0: ttyO0 at MMIO 0x4806a000 (irq = 72) is a OMAP UART0
omap_uart.1: ttyO1 at MMIO 0x4806c000 (irq = 73) is a OMAP UART1
omap_uart.2: ttyO2 at MMIO 0x49020000 (irq = 74) is a OMAP UART2
console [ttyO2] enabled
brd: module loaded
loop: module loaded
twl4030_madc twl4030_madc: clk disabled, enabling
omap2-nand driver initializing
ONFI flash detected
NAND device: Manufacturer ID: 0x2c, Chip ID: 0xba (Micron NAND 256MiB 1,8V 16-bit)
Creating 5 MTD partitions on "omap2-nand.0":
0x000000000000-0x000000080000 : "xloader"
0x000000080000-0x000000240000 : "uboot"
0x000000240000-0x000000280000 : "uboot environment"
0x000000280000-0x000000680000 : "linux"
0x000000680000-0x000010000000 : "rootfs"
smsc911x: Driver version 2008-10-21
smsc911x-mdio: probed
smsc911x smsc911x.0: eth0: attached PHY driver [Generic PHY] (mii_bus:phy_addr=0:01, irq=-1)
smsc911x smsc911x.0: eth0: MAC Address: 00:15:c9:28:d6:48
smsc911x: Driver version 2008-10-21
usbcore: registered new interface driver asix
usbcore: registered new interface driver cdc_ether
cdc_ncm: 04-Aug-2011
usbcore: registered new interface driver cdc_ncm
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-omap ehci-omap.0: OMAP-EHCI Host Controller
ehci-omap ehci-omap.0: new USB bus registered, assigned bus number 1
ehci-omap ehci-omap.0: irq 77, io mem 0x48064800
ehci-omap ehci-omap.0: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: OMAP-EHCI Host Controller
usb usb1: Manufacturer: Linux 3.2.0 ehci_hcd
usb usb1: SerialNumber: ehci-omap.0
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 3 ports detected
Initializing USB Mass Storage driver...
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
mousedev: PS/2 mouse device common for all mice
twl_rtc twl_rtc: Power up reset detected.
twl_rtc twl_rtc: rtc core: registered twl_rtc as rtc0
i2c /dev entries driver
cpuidle: using governor ladder
cpuidle: using governor menu
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
omap-iommu omap-iommu.0: isp registered
usbcore: registered new interface driver snd-usb-audio
overo SoC init
asoc: twl4030-hifi <-> omap-mcbsp-dai.1 mapping ok
ALSA device list:
#0: overo
oprofile: hardware counters not available
oprofile: using timer interrupt.
TCP cubic registered
NET: Registered protocol family 17
NET: Registered protocol family 15
Registering the dns_resolver key type
VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 1
ThumbEE CPU extension supported.
sr_init: No PMIC hook to init smartreflex
smartreflex smartreflex.0: omap_sr_probe: SmartReflex driver initialized
smartreflex smartreflex.1: omap_sr_probe: SmartReflex driver initialized
clock: disabling unused clocks to save power
registered taskstats version 1
Console: switching to colour frame buffer device 80x30
omapdss DPI: Could not find exact pixel clock. Requested 23500 kHz, got 24000 kHz
regulator_init_complete: VDAC: incomplete constraints, leaving on
regulator_init_complete: vads7846: incomplete constraints, leaving on
twl_rtc twl_rtc: setting system clock to 2000-01-01 00:00:09 UTC (946684809)
Waiting for root device /dev/mmcblk0p2...
mmc0: host does not support reading read-only switch. assuming write-enable.
mmc0: new SD card at address aaaa
mmcblk0: mmc0:aaaa SU02G 1.84 GiB
mmcblk0: p1 p2
kjournald starting. Commit interval 5 seconds
EXT3-fs (mmcblk0p2): using internal journal
EXT3-fs (mmcblk0p2): recovery complete
EXT3-fs (mmcblk0p2): mounted filesystem with writeback data mode
VFS: Mounted root (ext3 filesystem) on device 179:2.
devtmpfs: mounted
Freeing init memory: 208K
Failed to mount /sys/kernel/security: No such file or directory
Welcome to Linux!
NET: Registered protocol family 10
Starting alignment.service...
Starting LSB: Mount kernel virtual file systems....
Starting LSB: Mount all filesystems....
Starting banner.service...
Starting LSB: Set hostname based on /etc/hostname...
Starting Remount API VFS...
Starting File System Check on Root Device...
Starting Temporary Directory...
Started Set Up Additional Binary Formats [ OK ]
Started Huge Pages File System [ OK ]
Starting Debug File System...
Starting Load Kernel Modules...
Started Apply Kernel Variables [ OK ]
Starting udev Kernel Device Manager...
Starting udev Coldplug all Devices...
Started POSIX Message Queue File System [ OK ]
Starting Journal Service...
Started Journal Service [ OK ]
Started alignment.service [ OK ]
Started banner.service [ OK ]
Started LSB: Mount kernel virtual file systems. [ OK ]
Started LSB: Set hostname based udevd[76]: starting version 182
on /etc/hostname [ OK ]
Started udev Kernel Device Manager [ OK ]
Started Remount API VFS [ OK ]
Started File System Check on Root Device [ OK ]
Started Temporary Directory [ OK ]
Started Debug File System [ OK ]
Started LSB: Mount all filesystems. [ OK ]
Starting Remount Root FS...
Starting LSB: Mount /dev/pts file systems....
Starting LSB: Check to root file system....
Started /media/ram [ OK ]
Started /var/volatile [ OK ]
Bluetooth: Core ver 2.16
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
Started udev Coldplug all Devices [ OK ]
Started LSB: Mount /dev/pts file systems. [ OK ]
Bluetooth: HIDP (Human Interface Emulation) ver 1.2
ads7846 spi1.0: touchscreen, irq 274
Started Remount Root FS [ OK ]
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM socket layer initialized
ads7846 spi1.0: no device detected, test read result was 0x00000FFF
Bluetooth: RFCOMM ver 1.11
Started LSB: Check to root file system. [ OK ]
Started Load Kernel Modules [ OK ]
Started Configuration File System [ OK ]
Starting FUSE Control File System...
Starting LSB: Process /etc/modules....
Starting LSB: Raise network interfaces and configure them...
Starting LSB: Misc and other....
Starting mountnfs.service...
Starting LSB: Populate the volatile filesystem...
Starting Recreate Volatile Files and Directories...
Starting Load Random Seed...
Started FUSE Control File System [ OK ]
Started LSB: Process /etc/modules. [ OK ]
Started Load Random Seed [ OK ]
Started Recreate Volatile Files and Directories [ OK ]
Started mountnfs.service [ OK ]
bootmisc.sh[218]: Fri May 4 23:15:00 UTC 2012
Started LSB: Misc and other. [ OK ]
smsc911x smsc911x.0: eth0: SMSC911x/921x identified at 0xd0816000, IRQ: 336
eth0: IPv6 duplicate address fe80::215:c9ff:fe28:d648 detected!
networking[217]: Configuring network interfaces... udhcpc (v1.19.4) started
networking[217]: Sending discover...
networking[217]: Sending select for 192.168.10.114...
networking[217]: Lease of 192.168.10.114 obtained, lease time 43200
networking[217]: adding dns 192.168.10.2
networking[217]: done.
Started LSB: Populate the volatile filesystem [ OK ]
Started LSB: Raise network interfaces and configure them [ OK ]
Starting Console System Startup Logging...
Starting Permit User Sessions...
Starting D-Bus System Message Bus...
Starting sshd.service...
Started Console System Startup Logging [ OK ]
Started Permit User Sessions [ OK ]
Starting Serial Getty on ttyO2...
Started Serial Getty on ttyO2 [ OK ]
Started D-Bus System Message Bus [ OK ]
sshd[329]: Starting OpenBSD Secure Shell server: sshd
Starting Getty on tty1...
Started Getty on tty1 [ OK ]
sshd[329]: done.
Started sshd.service [ OK ]
Starting LSB: System logger...
Starting busybox-udhcpc.service...
syslog[349]: Starting syslogd/klogd: done
Started LSB: System logger [ OK ]
Started busybox-udhcpc.service [ OK ]
Starting LSB: Avahi mDNS/DNS-SD Daemon...
Starting LSB: Remove /etc/nologin at boot...
avahi-daemon[359]: * Starting Avahi mDNS/DNS-SD Daemon: avahi-daemon
Started LSB: Remove /etc/nologin at boot [ OK ]
avahi-daemon[359]: ...done.
Started LSB: Avahi mDNS/DNS-SD Daemon [ OK ]
Starting stop-bootlogd.service...
stop-bootlogd[369]: Stopping Bootlog daemon: bootlogd.
Started stop-bootlogd.service [ OK ]
Starting Notify Audit System and Update UTMP about System Runlevel Changes...
Yocto (Built by Poky 7.0) 1.2+snapshot-20120504 overo ttyO2
overo login:
Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment