RaspberryPi FreeBSD boot log

rpi-freebsd-boot.txt

U-Boot 2013.01-rc1-svn18531 (Sep 19 2014 - 01:20:41)

DRAM:  224 MiB
WARNING: Caches not enabled
MMC:   bcm2835_sdhci: 0
Using default environment

In:    serial
Out:   lcd
Err:   lcd
mbox: Timeout waiting for response
bcm2835: Could not set USB power state
Net:   Net Initialization Skipped
No ethernet found.
Hit any key to stop autoboot:  0
reading uEnv.txt
89 bytes read in 9147 ms (0 Bytes/s)
Importing environment from mmc ...
reading ubldr
250419 bytes read in 54672 ms (3.9 KiB/s)
## Starting application at 0x02000054 ...
Consoles: U-Boot console
Compatible U-Boot API signature found @db682a8

FreeBSD/armv6 U-Boot loader, Revision 1.2
(root@grind.freebsd.org, Fri Sep 19 01:20:32 UTC 2014)

DRAM: 224MB
Number of U-Boot devices: 1
U-Boot env: loaderdev not set, will probe all devices.
Found U-Boot device: disk
  Probing all disk devices...
  Checking unit=0 slice=<auto> partition=<auto>... good.
Loading /boot/defaults/loader.conf
/boot/kernel/kernel data=0x4d37a4+0xa885c syms=[0x4+0x88c30+0x4+0x5191c]

Hit [Enter] to boot immediately, or any other key for command prompt.
Booting [/boot/kernel/kernel]...
Using DTB provided by U-Boot at address 0x100.
Kernel entry at 0x100100...
Kernel args: (null)
KDB: debugger backends: ddb
KDB: current backend: ddb
Copyright (c) 1992-2014 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
        The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 11.0-CURRENT #0 r271779: Fri Sep 19 01:18:53 UTC 2014
    root@grind.freebsd.org:/usr/obj/arm.armv6/usr/src/sys/RPI-B arm
FreeBSD clang version 3.4.1 (tags/RELEASE_34/dot1-final 208032) 20140512
VT: init without driver.
CPU: ARM1176JZ-S rev 7 (ARM11J core)
 Supported features: ARM_ISA THUMB2 JAZELLE ARMv4 Security_Ext
 WB enabled LABT branch prediction enabled
  16KB/32B 4-way instruction cache
  16KB/32B 4-way write-back-locking-C data cache
real memory  = 268431360 (255 MB)
avail memory = 220913664 (210 MB)
random device not loaded; using insecure entropy
random: <Software, Yarrow> initialized
kbd0 at kbdmux0
ofwbus0: <Open Firmware Device Tree>
simplebus0: <Flattened device tree simple bus> mem 0x20000000-0x20ffffff on ofwbus0
intc0: <BCM2835 Interrupt Controller> mem 0xb200-0xb3ff on simplebus0
systimer0: <BCM2835 System Timer> mem 0x3000-0x3fff irq 8,9,10,11 on simplebus0
Event timer "BCM2835 Event Timer 3" frequency 1000000 Hz quality 1000
Timecounter "BCM2835 Timecounter" frequency 1000000 Hz quality 1000
bcmwd0: <BCM2708/2835 Watchdog> mem 0x10001c-0x100027 on simplebus0
gpio0: <BCM2708/2835 GPIO controller> mem 0x200000-0x2000af irq 57,59,58,60 on simplebus0
gpio0: read-only pins: 46,47,48,49,50,51,52,53.
gpio0: reserved pins: 48,49,50,51,52,53.
gpioc0: <GPIO controller> on gpio0
gpiobus0: <OFW GPIO bus> on gpio0
gpioled0: <GPIO led> at pin(s) 16 on gpiobus0
iichb0: <BCM2708/2835 BSC controller> mem 0x205000-0x20501f irq 61 on simplebus0
iicbus0: <OFW I2C bus> on iichb0
iic0: <I2C generic I/O> on iicbus0
iichb1: <BCM2708/2835 BSC controller> mem 0x804000-0x80401f irq 61 on simplebus0
iicbus1: <OFW I2C bus> on iichb1
iic1: <I2C generic I/O> on iicbus1
spi0: <BCM2708/2835 SPI controller> mem 0x204000-0x20401f irq 62 on simplebus0
spibus0: <OFW SPI bus> on spi0
bcm_dma0: <BCM2835 DMA Controller> mem 0x7000-0x7fff,0xe05000-0xe05fff irq 24,25,26,27,28,29,30,31,32,33,34,35,36 on simplebus0
mbox0: <BCM2835 VideoCore Mailbox> mem 0xb880-0xb8bf irq 1 on simplebus0
sdhci_bcm0: <Broadcom 2708 SDHCI controller> mem 0x300000-0x3000ff irq 70 on simplebus0
mmc0: <MMC/SD bus> on sdhci_bcm0
uart0: <PrimeCell UART (PL011)> mem 0x201000-0x201fff irq 65 on simplebus0
uart0: console (115200,n,8,1)
dwcotg0: <DWC OTG 2.0 integrated USB controller> mem 0x980000-0x99ffff irq 17 on simplebus0
usbus0 on dwcotg0
fb0: <BCM2835 VT framebuffer driver> on ofwbus0
simplebus1: <Flattened device tree simple bus> on ofwbus0
simplebus1: could not get ranges
device_attach: simplebus1 attach returned 6
Timecounters tick every 10.000 msec
usbus0: 480Mbps High Speed USB v2.0
ugen0.1: <DWCOTG> at usbus0
uhub0: <DWCOTG OTG Root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus0
mmcsd0: 8GB <SDHC SD08G 8.0 SN 0551E15A MFG 04/2010 by 3 SD> at mmc0 25.0MHz/4bit/65535-block
fb0: 656x416(0x0@0,0) 16bpp
fb0: pitch 1312, base 0x4e006000, screen_size 545792
fbd0 on fb0
VT: initialize with new VT driver "fb".
random: unblocking device.
Root mount waiting for: usbus0
uhub0: 1 port with 1 removable, self powered
ugen0.2: <vendor 0x0424> at usbus0
uhub1: <vendor 0x0424 product 0x9512, class 9/0, rev 2.00/2.00, addr 2> on usbus0
uhub1: MTT enabled
Root mount waiting for: usbus0
uhub1: 3 ports with 2 removable, self powered
Root mount waiting for: usbus0
ugen0.3: <vendor 0x0424> at usbus0
smsc0: <vendor 0x0424 product 0xec00, rev 2.00/2.00, addr 3> on usbus0
Trying to mount root from ufs:/dev/mmcsd0s2a [rw,noatime]...
smsc0: chip 0xec00, rev. 0002
warning: no time-of-day clock registered, system time will not be set accurately
miibus0: <MII bus> on smsc0
ukphy0: <Generic IEEE 802.3u media interface> PHY 1 on miibus0
ukphy0:  none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
ue0: <USB Ethernet> on smsc0
ue0: Ethernet address: b8:27:eb:12:73:e8
Enlarging root partition
GEOM_PART: mmcsd0s2 was automatically resized.
  Use `gpart commit mmcsd0s2` to save changes or `gpart undo mmcsd0s2` to revert them.
mmcsd0s2 resized
mmcsd0s2a resized
super-block backups (for fsck_ffs -b #) at:
 1918400, 2397952, 2877504, 3357056, 3836608, 4316160, 4795712, 5275264,
 5754816, 6234368, 6713920, 7193472, 7673024, 8152576, 8632128, 9111680,
 9591232, 10070784, 10550336, 11029888, 11509440, 11988992, 12468544, 12948096,
 13427648, 13907200, 14386752, 14866304, 15345856
Setting hostuuid: a265072f-3f9b-11e4-8d7e-b827eb1273e8.
Setting hostid: 0x3ffeea7a.
No suitable dump device was found.
Entropy harvesting: interrupts ethernet point_to_point swi.
Starting file system checks:
/dev/mmcsd0s2a: FILE SYSTEM CLEAN; SKIPPING CHECKS
/dev/mmcsd0s2a: clean, 1771073 free (849 frags, 221278 blocks, 0.0% fragmentation)
Mounting local file systems:.
Writing entropy file:.
Setting hostname: raspberry-pi.
smsc0: chip 0xec00, rev. 0002
ue0: link state changed to DOWN
ue0: link state changed to UP
Starting Network: lo0 ue0.
lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> metric 0 mtu 16384
        options=600003<RXCSUM,TXCSUM,RXCSUM_IPV6,TXCSUM_IPV6>
        inet6 ::1 prefixlen 128
        inet6 fe80::1%lo0 prefixlen 64 scopeid 0x1
        inet 127.0.0.1 netmask 0xff000000
        nd6 options=21<PERFORMNUD,AUTO_LINKLOCAL>
ue0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
        options=80001<RXCSUM,LINKSTATE>
        ether b8:27:eb:12:73:e8
        media: Ethernet autoselect (100baseTX <full-duplex>)
        status: active
        nd6 options=29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL>
Starting devd.
Starting dhclient.
DHCPDISCOVER on ue0 to 255.255.255.255 port 67 interval 3
DHCPOFFER from 192.168.10.1
DHCPREQUEST on ue0 to 255.255.255.255 port 67
DHCPACK from 192.168.10.1
bound to 192.168.10.106 -- renewal in 21600 seconds.
Starting pflogd:
add net fe80::: gateway ::1
add net ff02::: gateway ::1
add net ::ffff:0.0.0.0: gateway ::1
add net ::0.0.0.0: gateway ::1
Generating host.conf.
Creating and/or trimming log files.
ELF ldconfig path: /lib /usr/lib /usr/lib/compat
Starting casperd.
Clearing /tmp (X related).
Updating motd:.
Mounting late file systems:.
Configuring vt: blanktime.
Generating RSA1 host key.
2048 4b:bb:33:c5:dd:64:70:86:c0:ee:8a:03:7d:dc:02:63  root@raspberry-pi (RSA1)
Generating RSA host key.
2048 c3:43:65:01:21:d9:4c:4b:c5:85:d9:a7:3c:fd:ce:19  root@raspberry-pi (RSA)
Generating DSA host key.
1024 f8:ca:10:a0:c3:7d:39:4b:9c:c9:88:1e:9b:40:39:be  root@raspberry-pi (DSA)
Generating ECDSA host key.
256 96:93:29:dd:c2:8b:33:c7:07:fd:a8:87:de:ee:fc:12  root@raspberry-pi (ECDSA)
Generating ED25519 host key.
256 34:99:da:3b:07:df:2d:c4:63:ac:eb:9b:a3:d3:fa:54  root@raspberry-pi (ED25519)
Performing sanity check on sshd configuration.
Starting sshd.
Starting background file system checks in 60 seconds.

Fri Sep 19 01:25:00 UTC 2014

FreeBSD/arm (raspberry-pi) (ttyu0)

login: