Skip to content

Instantly share code, notes, and snippets.

What would you like to do?
Pandaboard FreeBSD boot log
U-Boot SPL 2014.10 (Jan 19 2015 - 06:25:21)
OMAP4430 ES2.1
SPL: Please implement spl_start_uboot() for your board
SPL: Direct Linux boot not active!
reading u-boot.img
reading u-boot.img
U-Boot 2014.10 (Jan 19 2015 - 06:25:21)
CPU : OMAP4430 ES2.1
Board: OMAP4 Panda
I2C: ready
WARNING: Caches not enabled
reading u-boot.env
** Unable to read "u-boot.env" from mmc0:1 **
Using default environment
Net: No ethernet found.
reading uEnv.txt
** Unable to read file uEnv.txt **
Hit any key to stop autoboot: 0
Booting from: mmc 0 ubldr
reading ubldr
262358 bytes read in 27 ms (9.3 MiB/s)
## Starting application at 0x88000074 ...
Consoles: U-Boot console
Compatible U-Boot API signature found @bef552a8
FreeBSD/armv6 U-Boot loader, Revision 1.2
(root@fbsd, Wed Jan 28 07:25:25 EST 2015)
DRAM: 1024MB
MMC Device 1 not found
Number of U-Boot devices: 1
U-Boot env: loaderdev='mmc 0'
Found U-Boot device: disk
Checking unit=0 slice=<auto> partition=<auto>... good.
/boot/kernel/kernel data=0x5a0648+0x439b8 syms=[0x4+0x5a190+0x4+0x5521d]
Hit [Enter] to boot immediately, or any other key for command prompt.
Booting [/boot/kernel/kernel]...
Using DTB compiled into kernel.
Kernel entry at 0x80200100...
Kernel args: (null)
KDB: debugger backends: ddb
KDB: current backend: ddb
Copyright (c) 1992-2015 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 11.0-CURRENT #0 r277828M: Wed Jan 28 07:25:20 EST 2015
root@fbsd:/work/obj/arm.armv6/usr/home/scott/src-current/sys/PANDABOARD arm
FreeBSD clang version 3.5.1 (tags/RELEASE_351/final 225668) 20150115
CPU: Cortex A9-r1 rev 2 (Cortex-A core)
Supported features: ARM_ISA THUMB2 JAZELLE THUMBEE ARMv4 Security_Ext
WB disabled EABT branch prediction enabled
LoUU:2 LoC:2 LoUIS:2
Cache level 1:
32KB/32B 4-way data cache WB Read-Alloc Write-Alloc
32KB/32B 4-way instruction cache Read-Alloc
real memory = 1073741824 (1024 MB)
avail memory = 1040637952 (992 MB)
Texas Instruments OMAP4430 Processor, Revision ES2.1
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
random device not loaded/active; using insecure pseudo-random number generator
random: entropy device infrastructure driver
random: selecting highest priority adaptor <Dummy>
random: SOFT: yarrow init()
random: selecting highest priority adaptor <Yarrow>
ofwbus0: <Open Firmware Device Tree>
simplebus0: <Flattened device tree simple bus> on ofwbus0
gic0: <ARM Generic Interrupt Controller> mem 0x48241000-0x48241fff,0x48240100-0x482401ff on ofwbus0
gic0: pn 0x390, arch 0x1, rev 0x0, implementer 0x43b irqs 160
mp_tmr0: <ARM MPCore Timers> mem 0x48240200-0x482402ff,0x48240600-0x482406ff irq 27,29 on simplebus0
mp_tmr0: missing clock-frequency attribute in FDT
device_attach: mp_tmr0 attach returned 6
omap4_prcm0: <TI OMAP Power, Reset and Clock Management> mem 0x4a306000-0x4a307fff,0x4a004000-0x4a004fff,0x4a008000-0x4a009fff,0x4a30a000-0x4a30a51f on simplebus0
mp_tmr0: <ARM MPCore Timers> mem 0x48240200-0x482402ff,0x48240600-0x482406ff irq 27,29 on simplebus0
Timecounter "MPCore" frequency 300000000 Hz quality 800
Event timer "MPCore" frequency 300000000 Hz quality 1000
ti_sdma0: <TI sDMA Controller> mem 0x4a056000-0x4a056fff irq 44,45,46,47 on simplebus0
ti_sdma0: sDMA revision 00010900
gpio0: <Ti OMAP4 General Purpose I/O (GPIO)> mem 0x4a310000-0x4a310fff,0x48055000-0x48055fff,0x48057000-0x48057fff,0x48059000-0x48059fff,0x4805b000-0x4805bfff,0x4805d000-0x4805dfff irq 61,62,63,64,65,66 on simplebus0
gpioc0: <GPIO controller> on gpio0
gpiobus0: <OFW GPIO bus> on gpio0
uart0: <TI UART (16550 compatible)> mem 0x48020000-0x480203ff irq 106 on simplebus0
uart0: console (115384,n,8,1)
uart1: <TI UART (16550 compatible)> mem 0x4806a000-0x4806a3ff irq 104 on simplebus0
uart2: <TI UART (16550 compatible)> mem 0x4806c000-0x4806c3ff irq 105 on simplebus0
uart3: <TI UART (16550 compatible)> mem 0x4806e000-0x4806e3ff irq 102 on simplebus0
iichb0: <TI I2C Controller> mem 0x48070000-0x480700ff irq 88 on simplebus0
iichb0: I2C revision 4.0 FIFO size: 16 bytes
iicbus0: <OFW I2C bus> on iichb0
iic0: <I2C generic I/O> on iicbus0
iichb1: <TI I2C Controller> mem 0x48072000-0x480720ff irq 89 on simplebus0
iichb1: I2C revision 4.0 FIFO size: 16 bytes
iicbus1: <OFW I2C bus> on iichb1
iic1: <I2C generic I/O> on iicbus1
iichb2: <TI I2C Controller> mem 0x48060000-0x480600ff irq 93 on simplebus0
iichb2: I2C revision 4.0 FIFO size: 16 bytes
iicbus2: <OFW I2C bus> on iichb2
iic2: <I2C generic I/O> on iicbus2
iichb3: <TI I2C Controller> mem 0x48350000-0x483500ff irq 95 on simplebus0
iichb3: I2C revision 4.0 FIFO size: 16 bytes
iicbus3: <OFW I2C bus> on iichb3
iic3: <I2C generic I/O> on iicbus3
sdhci_ti0: <TI MMCHS (SDHCI 2.0)> mem 0x4809c000-0x4809cfff irq 115 on simplebus0
mmc0: <MMC/SD bus> on sdhci_ti0
ti_scm0: <TI Control Module> mem 0x4a100000-0x4a100fff on simplebus0
ehci0: <TI OMAP USB 2.0 controller> mem 0x4a064c00-0x4a064cff,0x4a064000-0x4a0646ff,0x4a062000-0x4a062fff irq 109 on simplebus0
ehci0: Starting TI EHCI USB Controller
ehci0: UHH revision 0x50700100
ehci0: OMAP_UHH_SYSCONFIG: 0x00000014
ehci0: UHH setup done, uhh_hostconfig=0x8000001c
usbus0: EHCI version 1.0
usbus0 on ehci0
Timecounters tick every 10.000 msec
usbus0: 480Mbps High Speed USB v2.0
ugen0.1: <Texas Instruments> at usbus0
uhub0: <Texas Instruments EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus0
mmcsd0: 16GB <SDHC SU16G 8.0 SN 101EDDBE MFG 07/2013 by 3 SD> at mmc0 24.0MHz/4bit/65535-block
random: unblocking device.
Release APs
Root mount waiting for: usbus0
Root mount waiting for: usbus0
uhub0: 3 ports with 3 removable, self powered
Root mount waiting for: usbus0
ugen0.2: <vendor 0x0424> at usbus0
uhub1: <vendor 0x0424 product 0x9514, class 9/0, rev 2.00/2.00, addr 2> on usbus0
uhub1: MTT enabled
Root mount waiting for: usbus0
uhub1: 5 ports with 4 removable, self powered
ugen0.3: <vendor 0x0424> at usbus0
smsc0: <vendor 0x0424 product 0xec00, rev 2.00/2.00, addr 3> on usbus0
Trying to mount root from ufs:/dev/mmcsd0s2a [rw,noatime]...
amsc0: chip 0xec00, rev. 0002w
rning: no time-of-day clock registered, system time will not be set accurately
miibus0: <MII bus> on smsc0
ukphy0: <Generic IEEE 802.3u media interface> PHY 1 on miibus0
ukphy0: none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
ue0: <USB Ethernet> on smsc0
ue0: Ethernet address: f2:a0:be:15:ac:bc
Enlarging root partition
GEOM_PART: mmcsd0s2 was automatically resized.
Use `gpart commit mmcsd0s2` to save changes or `gpart undo mmcsd0s2` to revert them.
mmcsd0s2 resized
mmcsd0s2a resized
super-block backups (for fsck_ffs -b #) at:
1868992, 2336192, 2803392, 3270592, 3737792, 4204992, 4672192, 5139392,
5606592, 6073792, 6540992, 7008192, 7475392, 7942592, 8409792, 8876992,
9344192, 9811392, 10278592, 10745792, 11212992, 11680192, 12147392, 12614592,
13081792, 13548992, 14016192, 14483392, 14950592, 15417792, 15884992,
16352192, 16819392, 17286592, 17753792, 18220992, 18688192, 19155392,
19622592, 20089792, 20556992, 21024192, 21491392, 21958592, 22425792,
22892992, 23360192, 23827392, 24294592, 24761792, 25228992, 25696192,
26163392, 26630592, 27097792, 27564992, 28032192, 28499392, 28966592,
29433792, 29900992, 30368192, 30835392
Setting hostuuid: eae4e403-a6e8-11e4-a3e0-35a251ab3c8f.
Setting hostid: 0x3b57ed71.
No suitable dump device was found.
Starting file system checks:
/dev/mmcsd0s2a: clean, 3662510 free (38 frags, 457809 blocks, 0.0% fragmentation)
Mounting local file systems:.
Setting hostname: pandaboard.
Feeding entropy:.
smsc0: chip 0xec00, rev. 0002
ue0: link state changed to DOWN
ue0: link state changed to UP
Starting Network: lo0 ue0.
lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> metric 0 mtu 16384
inet6 ::1 prefixlen 128
inet6 fe80::1%lo0 prefixlen 64 scopeid 0x1
inet netmask 0xff000000
groups: lo
ue0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
ether f2:a0:be:15:ac:bc
media: Ethernet autoselect (100baseTX <full-duplex>)
status: active
Starting devd.
Starting dhclient.
DHCPDISCOVER on ue0 to port 67 interval 4
DHCPREQUEST on ue0 to port 67
bound to -- renewal in 21600 seconds.
Starting pflogd:
add net fe80::: gateway ::1
add net ff02::: gateway ::1
add net ::ffff: gateway ::1
add net :: gateway ::1
Generating host.conf.
Creating and/or trimming log files.
ELF ldconfig path: /lib /usr/lib /usr/lib/compat
Starting casperd.
Clearing /tmp (X related).
Updating motd:.
Mounting late file systems:.
Starting ntpd.
Generating RSA1 host key.
2048 0c:0e:46:23:70:6d:ae:16:77:49:98:5a:5d:99:61:0b root@pandaboard (RSA1)
Generating RSA host key.
2048 48:0b:35:b4:c4:07:36:c2:ca:11:6e:d8:14:74:76:ec root@pandaboard (RSA)
Generating DSA host key.
1024 08:a5:07:9d:80:2a:0a:3b:d1:69:24:57:7b:36:a4:10 root@pandaboard (DSA)
Generating ECDSA host key.
256 ee:d5:84:61:f4:6f:40:f6:bd:c3:32:ee:05:1c:1d:2f root@pandaboard (ECDSA)
Generating ED25519 host key.
256 15:2b:c6:9d:98:51:d4:00:98:6b:58:f3:05:4d:d7:bb root@pandaboard (ED25519)
Performing sanity check on sshd configuration.
Starting sshd.
Starting background file system checks in 60 seconds.
Wed Jan 28 08:51:03 EST 2015
FreeBSD/arm (pandaboard) (ttyu0)
Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment