Created
November 15, 2014 23:41
-
-
Save scottellis/efe5cb8299d5ba5ff72a to your computer and use it in GitHub Desktop.
Wandboard-Quad 32GB sd card resize fail
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
| U-Boot 2014.10 (Nov 14 2014 - 08:42:07) | |
| CPU: Freescale i.MX6Q rev1.2 at 792 MHz | |
| Reset cause: POR | |
| Board: Wandboard | |
| I2C: ready | |
| DRAM: 2 GiB | |
| WARNING: Caches not enabled | |
| MMC: FSL_SDHC: 0, FSL_SDHC: 1 | |
| *** Warning - bad CRC, using default environment | |
| No panel detected: default to HDMI | |
| Display: HDMI (1024x768) | |
| In: serial | |
| Out: serial | |
| Err: serial | |
| Net: FEC [PRIME] | |
| Hit any key to stop autoboot: 0 | |
| switch to partitions #0, OK | |
| mmc0 is current device | |
| reading boot.scr | |
| 158 bytes read in 9 ms (16.6 KiB/s) | |
| Running bootscript from mmc ... | |
| ## Executing script at 12000000 | |
| reading ubldr | |
| 251103 bytes read in 26 ms (9.2 MiB/s) | |
| ## Starting application at 0x11000054 ... | |
| Consoles: U-Boot console | |
| Compatible U-Boot API signature found @8f5844a8 | |
| FreeBSD/armv6 U-Boot loader, Revision 1.2 | |
| (root@fbsd, Fri Nov 14 08:42:01 EST 2014) | |
| DRAM: 2048MB | |
| MMC: no card present | |
| MMC Device 2 not found | |
| MMC Device 3 not found | |
| Number of U-Boot devices: 2 | |
| U-Boot env: loaderdev not set, will probe all devices. | |
| Found U-Boot device: disk | |
| Probing all disk devices... | |
| Checking unit=0 slice=<auto> partition=<auto>... good. | |
| Loading /boot/defaults/loader.conf | |
| /boot/kernel/kernel data=0x5868c8+0x41738 syms=[0x4+0x87fc0+0x4+0x54241] | |
| Hit [Enter] to boot immediately, or any other key for command prompt. | |
| Booting [/boot/kernel/kernel]... | |
| /boot/kernel/wandboard-quad.dtb size=0x3e59 | |
| Loaded DTB from file 'wandboard-quad.dtb'. | |
| Kernel entry at 0x12000100... | |
| Kernel args: (null) | |
| KDB: debugger backends: ddb | |
| KDB: current backend: ddb | |
| Copyright (c) 1992-2014 The FreeBSD Project. | |
| Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 | |
| The Regents of the University of California. All rights reserved. | |
| FreeBSD is a registered trademark of The FreeBSD Foundation. | |
| FreeBSD 11.0-CURRENT #1 r274498M: Sat Nov 15 08:27:43 EST 2014 | |
| root@fbsd:/usr/home/scott/dev/crochet-freebsd/work-quad/obj/arm.armv6/usr/src/sys/IMX6 arm | |
| FreeBSD clang version 3.4.1 (tags/RELEASE_34/dot1-final 208032) 20140512 | |
| CPU: Cortex A9-r2 rev 10 (Cortex-A core) | |
| Supported features: ARM_ISA THUMB2 JAZELLE THUMBEE ARMv4 Security_Ext | |
| WB disabled EABT branch prediction enabled | |
| LoUU:2 LoC:1 LoUIS:2 | |
| Cache level 1: | |
| 32KB/32B 4-way data cache WB Read-Alloc Write-Alloc | |
| 32KB/32B 4-way instruction cache Read-Alloc | |
| real memory = 2147483648 (2048 MB) | |
| avail memory = 2093187072 (1996 MB) | |
| FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs | |
| random device not loaded/active; using insecure pseudo-random number generator | |
| random: entropy device infrastructure driver | |
| random: selecting highest priority adaptor <Dummy> | |
| random: SOFT: yarrow init() | |
| random: selecting highest priority adaptor <Yarrow> | |
| ofwbus0: <Open Firmware Device Tree> | |
| simplebus0: <Flattened device tree simple bus> on ofwbus0 | |
| simplebus1: <Flattened device tree simple bus> mem 0x2000000-0x20fffff on simplebus0 | |
| imx6_anatop0: <Freescale i.MX6 Analog PLLs and Power> mem 0x20c8000-0x20c8fff irq 49 on simplebus1 | |
| simplebus2: <Flattened device tree simple bus> mem 0x2100000-0x21fffff on simplebus0 | |
| ocotp0: <Freescale On-Chip One-Time-Programmable Memory> mem 0x21bc000-0x21bffff on simplebus2 | |
| ccm0: <Freescale i.MX6 Clock Control Module> mem 0x20c4000-0x20c7fff irq 119,120 on simplebus1 | |
| l2cache0: <PL310 L2 cache controller> mem 0xa02000-0xa02fff irq 124 on simplebus0 | |
| l2cache0: Part number: 0x3, release: 0x7 | |
| l2cache0: L2 Cache enabled: 1024KB/32B 16 ways | |
| gic0: <ARM Generic Interrupt Controller> mem 0xa01000-0xa01fff,0xa00100-0xa001ff on simplebus0 | |
| gic0: pn 0x390, arch 0x1, rev 0x2, implementer 0x43b irqs 160 | |
| imx_gpt0: <Freescale i.MX GPT timer> mem 0x2098000-0x209bfff irq 87 on simplebus1 | |
| Event timer "iMXGPT" frequency 66000000 Hz quality 800 | |
| Timecounter "iMXGPT" frequency 66000000 Hz quality 1000 | |
| mp_tmr0: <ARM MPCore Timers> mem 0xa00200-0xa002ff,0xa00600-0xa006ff irq 27,29 on simplebus0 | |
| Event timer "MPCore" frequency 492000000 Hz quality 1000 | |
| gpio0: <Freescale i.MX GPIO Controller> mem 0x209c000-0x209ffff irq 98,99 on simplebus1 | |
| gpioc0: <GPIO controller> on gpio0 | |
| gpiobus0: <GPIO bus> on gpio0 | |
| gpio1: <Freescale i.MX GPIO Controller> mem 0x20a0000-0x20a3fff irq 100,101 on simplebus1 | |
| gpioc1: <GPIO controller> on gpio1 | |
| gpiobus1: <GPIO bus> on gpio1 | |
| gpio2: <Freescale i.MX GPIO Controller> mem 0x20a4000-0x20a7fff irq 102,103 on simplebus1 | |
| gpioc2: <GPIO controller> on gpio2 | |
| gpiobus2: <GPIO bus> on gpio2 | |
| gpio3: <Freescale i.MX GPIO Controller> mem 0x20a8000-0x20abfff irq 104,105 on simplebus1 | |
| gpioc3: <GPIO controller> on gpio3 | |
| gpiobus3: <GPIO bus> on gpio3 | |
| gpio4: <Freescale i.MX GPIO Controller> mem 0x20ac000-0x20affff irq 106,107 on simplebus1 | |
| gpioc4: <GPIO controller> on gpio4 | |
| gpiobus4: <GPIO bus> on gpio4 | |
| gpio5: <Freescale i.MX GPIO Controller> mem 0x20b0000-0x20b3fff irq 108,109 on simplebus1 | |
| gpioc5: <GPIO controller> on gpio5 | |
| gpiobus5: <GPIO bus> on gpio5 | |
| gpio6: <Freescale i.MX GPIO Controller> mem 0x20b4000-0x20b7fff irq 110,111 on simplebus1 | |
| gpioc6: <GPIO controller> on gpio6 | |
| gpiobus6: <GPIO bus> on gpio6 | |
| uart0: <Freescale i.MX UART> mem 0x2020000-0x2023fff irq 58 on simplebus1 | |
| uart0: console (115200,n,8,1) | |
| usbphy0: <Freescale i.MX6 USB PHY> mem 0x20c9000-0x20c9fff irq 44 on simplebus1 | |
| usbphy1: <Freescale i.MX6 USB PHY> mem 0x20ca000-0x20cafff irq 45 on simplebus1 | |
| ffec0: <Freescale Gigabit Ethernet Controller> mem 0x2188000-0x218bfff irq 150,151 on simplebus2 | |
| miibus0: <MII bus> on ffec0 | |
| atphy0: <Atheros F1 10/100/1000 PHY> PHY 1 on miibus0 | |
| atphy0: none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseSX-FDX, 1000baseT-FDX, 1000baseT-FDX-master, auto | |
| ffec0: Ethernet address: 00:1f:7b:b4:03:79 | |
| ehci0: <Freescale i.MX integrated USB controller> mem 0x2184000-0x21841ff irq 75 on simplebus2 | |
| ehci0: [GIANT-LOCKED] | |
| usbus0: EHCI version 1.0 | |
| usbus0 on ehci0 | |
| ehci1: <Freescale i.MX integrated USB controller> mem 0x2184200-0x21843ff irq 72 on simplebus2 | |
| ehci1: [GIANT-LOCKED] | |
| usbus1: EHCI version 1.0 | |
| usbus1 on ehci1 | |
| sdhci_imx0: <Freescale uSDHC controller> mem 0x2190000-0x2193fff irq 54 on simplebus2 | |
| mmc0: <MMC/SD bus> on sdhci_imx0 | |
| sdhci_imx1: <Freescale uSDHC controller> mem 0x2198000-0x219bfff irq 56 on simplebus2 | |
| mmc1: <MMC/SD bus> on sdhci_imx1 | |
| Timecounters tick every 2.000 msec | |
| usbus0: 480Mbps High Speed USB v2.0 | |
| usbus1: 480Mbps High Speed USB v2.0 | |
| ugen0.1: <Freescale> at usbus0 | |
| uhub0: <Freescale EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus0 | |
| ugen1.1: <Freescale> at usbus1 | |
| uhub1: <Freescale EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1 | |
| mmc0: No compatible cards found on bus | |
| mmcsd0: 32GB <SDHC SL32G 8.0 SN 288953B0 MFG 10/2014 by 3 SD> at mmc1 50.0MHz/4bit/65535-block | |
| random: unblocking device. | |
| Release APs | |
| uhub1: 1 port with 1 removable, self powered | |
| uhub0: 1 port with 1 removable, self powered | |
| Trying to mount root from ufs:/dev/mmcsd0s2a [rw,noatime]... | |
| warning: no time-of-day clock registered, system time will not be set accurately | |
| Enlarging root partition | |
| GEOM_PART: mmcsd0s2 was automatically resized. | |
| Use `gpart commit mmcsd0s2` to save changes or `gpart undo mmcsd0s2` to revert them. | |
| mmcsd0s2 resized | |
| mmcsd0s2a resized | |
| super-block backups (for fsck_ffs -b #) at: | |
| 3852736, 4815872, 5779008, 6742144, 7705280, 8668416, 9631552, 10594688, | |
| 11557824,mmcsd0: Error indicated: 1 Timeout | |
| growfs: mmcsd0: Error indicated: 1 Timeout | |
| g_vfs_done():mmcsd0s2a[READ(offset=1002139648, length=4096)]error = 5 | |
| wtfs: write error: 12521mmcsd0: Error indicated: 1 Timeout | |
| g_vfs_done():mmcsd0s2a[READ(offset=1002139648, length=4096)]error = 5 | |
| 024: mmcsd0: Error indicated: 1 Timeout | |
| mmcsd0: Error indicated: 1 Timeout | |
| mmcsd0: Error indicated: 1 Timeout | |
| mmcsd0: Error indicated: 1 Timeout | |
| mmcsd0: Error indicated: 1 Timeout | |
| mmcsd0: Error indicated: 1 Timeout | |
| mmcsd0: Error indicated: 1 Timeout | |
| mmcsd0: Error indicated: 1 Timeout | |
| mmcsd0: Error indicated: 1 Timeout | |
| mmcsd0: Error indicated: 1 Timeout | |
| mmcsd0: Error indicated: 1 Timeout | |
| mmcsd0: Error indicated: 1 Timeout | |
| mmcsd0: Error indicated: 1 Timeout | |
| mmcsd0: Error indicated: 1 Timeout | |
| mmcsd0: Error indicated: 1 Timeout | |
| Input/output error | |
| mmcsd0: Error indicated: 1 Timeout | |
| mmcsd0: Error indicated: 1 Timeout | |
| mmcsd0: Error indicated: 1 Timeout | |
| mmcsd0: Error indicated: 1 Timeout | |
| mmcsd0: Error indicated: 1 Timeout | |
| mmcsd0: Error indicated: 1 Timeout | |
| mmcsd0: Error indicated: 1 Timeout | |
| mmcsd0: Error indicated: 1 Timeout | |
| mmcsd0: Error indicated: 1 Timeout | |
| mmcsd0: Error indicated: 1 Timeout | |
| mmcsd0: Error indicated: 1 Timeout | |
| mmcsd0: Error indicated: 1 Timeout | |
| mmcsd0: Error indicated: 1 Timeout | |
| mmcsd0: Error indicated: 1 Timeout | |
| mmcsd0: Error indicated: 1 Timeout | |
| mmcsd0: Error indicated: 1 Timeout | |
| mmcsd0: Error indicated: 1 Timeout | |
| mmcsd0: Error indicated: 1 Timeout | |
| mmcsd0: Error indicated: 1 Timeout | |
| mmcsd0: Error indicated: 1 Timeout | |
| mmcsd0: Error indicated: 1 Timeout | |
| mmcsd0: Error indicated: 1 Timeout | |
| mmcsd0: Error indicated: 1 Timeout | |
| mmcsd0: Error indicated: 1 Timeout | |
| mmcsd0: Error indicated: 1 Timeout | |
| mmcsd0: Error indicated: 1 Timeout | |
| mmcsd0: Error indicated: 1 Timeout | |
| mmcsd0: Error indicated: 1 Timeout | |
| mmcsd0: Error indicated: 1 Timeout | |
| mmcsd0: Error indicated: 1 Timeout | |
| mmcsd0: Error indicated: 1 Timeout | |
| mmcsd0: Error indicated: 1 Timeout | |
| mmcsd0: Error indicated: 1 Timeout | |
| mmcsd0: Error indicated: 1 Timeout | |
| g_vfs_done():mmcsd0s2a[READ(offset=558821376, length=4096)]error = 5 | |
| mmcsd0: Error indicated: 1 Timeout | |
| g_vfs_done():mmcsd0s2a[READ(offset=534532096, length=6144)]error = 5 | |
| vnode_pager_getpages: I/O read error | |
| mmcsd0: Error indicated: 1 Timeout | |
| g_vfs_done():mmcsd0s2a[READ(offset=1003257856, length=8192)]error = 5 | |
| mmcsd0: Error indicated: 1 Timeout | |
| g_vfs_done():mmcsd0s2a[READ(offset=1003257856, length=8192)]error = 5 | |
| mmcsd0: Error indicated: 1 Timeout | |
| g_vfs_done():mmcsd0s2a[READ(offset=1002139648, length=4096)]error = 5 | |
| mmcsd0: Error indicated: 1 Timeout | |
| g_vfs_done():mmcsd0s2a[READ(offset=1002139648, length=4096)]error = 5 | |
| eval: kenv: Input/output error | |
| mmcsd0: Error indicated: 1 Timeout | |
| g_vfs_done():mmcsd0s2a[READ(offset=537165824, length=5632)]error = 5 | |
| vSpurious interrupt detected | |
| nSpurious interrupt detected | |
| ode_pager_getpages: I/O read error | |
| mmcsd0: Error indicated: 1 Timeout | |
| g_vfs_done():mmcsd0s2a[READ(offset=1003257856, length=8192)]error = 5 | |
| mmcsd0: Error indicated: 1 Timeout | |
| g_vfs_done():mmcsd0s2a[READ(offset=1003257856, length=8192)]error = 5 | |
| mmcsd0: Error indicated: 1 Timeout | |
| g_vfs_done():mmcsd0s2a[READ(offset=1002139648, length=4096)]error = 5 | |
| mmcsd0: Error indicated: 1 Timeout | |
| g_vfs_done():mmcsd0s2a[READ(offset=1002139648, length=4096)]error = 5 | |
| eval: uuidgen: Input/output error | |
| mmcsd0: Error indicated: 1 Timeout | |
| g_vfs_done():mmcsd0s2a[READ(offset=1117224960, length=13312)]error = 5 | |
| vnode_pager_getpages: I/O read error | |
| eval: /sbin/md5: Input/output error | |
| Setting hostuuid: . | |
| Setting hostid: 0x. | |
| sysctl: invalid unsigned long '0x' | |
| mmcsd0: Error indicated: 1 Timeout | |
| g_vfs_done():mmcsd0s2a[READ(offset=534532096, length=4096)]error = 5 | |
| vnode_pager_getpages: I/O read error | |
| mmcsd0: Error indicated: 1 Timeout | |
| g_vfs_done():mmcsd0s2a[READ(offset=1002139648, length=4096)]error = 5 | |
| mmcsd0: Error indicated: 1 Timeout | |
| g_vfs_done():mmcsd0s2a[READ(offset=1002139648, length=4096)]error = 5 | |
| eval: /bin/kenv: Input/ommcsd0: Error indicated: 1 Timeout | |
| g_vfs_done():mmcsd0s2a[READ(offset=560992256, length=4096)]error = 5 | |
| utput error | |
| read: read error: Input/output error | |
| No suitable dump device was found. | |
| mmcsd0: Error indicated: 1 Timeout | |
| g_vfs_done():mmcsd0s2a[READ(offset=560992256, length=4096)]error = 5 | |
| mmcsd0: Error indicated: 1 Timeout | |
| g_vfs_done():mmcsd0s2a[READ(offset=1002139648, length=4096)]error = 5 | |
| mmcsd0: Error indicated: 1 Timeout | |
| g_vfs_done():mmcsd0s2a[READ(offset=1002139648, length=4096)]error = 5 | |
| read: read error: Input/output error | |
| mmcsd0: Error indicated: 1 Timeout | |
| g_vfs_done():mmcsd0s2a[READ(offset=1118273536, length=17408)]error = 5 | |
| vnode_pager_getpages: I/O read error | |
| mmcsd0: Error indicated: 1 Timeout | |
| g_vfs_done():mmcsd0s2a[READ(offset=1002139648, length=4096)]error = 5 | |
| mmcsd0: Error indicated: 1 Timeout | |
| g_vfs_done():mmcsd0s2a[READ(offset=1002139648, length=4096)]error = 5 | |
| eval: /sbin/swapon: Input/output error | |
| Starting file system chemmcsd0: Error indicated: 1 Timeout | |
| g_vfs_done():mmcsd0s2a[READ(offset=1112211456, length=16384)]error = 5 | |
| vnode_pager_getpages: I/O read error | |
| cks: | |
| mmcsd0: Error indicated: 1 Timeout | |
| g_vfs_done():mmcsd0s2a[READ(offset=1003257856, length=8192)]error = 5 | |
| mmcsd0: Error indicated: 1 Timeout | |
| g_vfs_done():mmcsd0s2a[READ(offset=1003257856, length=8192)]error = 5 | |
| mmcsd0: Error indicated: 1 Timeout | |
| g_vfs_done():mmcsd0s2a[READ(offset=1002139648, length=4096)]error = 5 | |
| mmcsd0: Error indicated: 1 Timeout | |
| g_vfs_done():mmcsd0s2a[READ(offset=1002139648, length=4096)]error = 5 | |
| eval: fsck: Input/output error | |
| Unknown error; help! | |
| ERROR: ABORTING BOmmcsd0: Error indicated: 1 Timeout | |
| g_vfs_done():mmcsd0s2a[READ(offset=1002139648, length=4096)]error = 5 | |
| OT (sending SIGTERM to pmmcsd0: Error indicated: 1 Timeout | |
| g_vfs_done():mmcsd0s2a[READ(offset=1002139648, length=4096)]error = 5 | |
| arent)! | |
| mmcsd0: Error indicated: 1 Timeout | |
| g_vfs_done():mmcsd0s2a[READ(offset=1116147712, length=65536)]error = 5 | |
| vnode_pager_getpages: I/O read error | |
| vm_fault: pager read error, pid 1 (init) | |
| mmcsd0: Error indicated: 1 Timeout | |
| g_vfs_done():mmcsd0s2a[READ(offset=1116180480, length=4096)]error = 5 | |
| vnode_pager_getpages: I/O read error | |
| vm_fault: pager read error, pid 1 (init) | |
| mmcsd0: Error indicated: 1 Timeout | |
| g_vfs_done():mmcsd0s2a[READ(offset=1116180480, length=4096)]error = 5 | |
| vnode_pager_getpages: I/O read error | |
| vm_fault: pager read error, pid 1 (init) | |
| mmcsd0: Error indicated: 1 Timeout | |
| g_vfs_done():mmcsd0s2a[READ(offset=1116180480, length=4096)]error = 5 | |
| vnode_pager_getpages: I/O read error | |
| vm_fault: pager read error, pid 1 (init) | |
| mmcsd0: Error indicated: 1 Timeout | |
| g_vfs_done():mmcsd0s2a[READ(offset=1116180480, length=4096)]error = 5 | |
| vnode_pager_getpages: I/O read error | |
| vm_fault: pager read error, pid 1 (init) | |
| mmcsd0: Error indicated: 1 Timeout | |
| g_vfs_done():mmcsd0s2a[READ(offset=1116180480, length=4096)]error = 5 | |
| vnode_pager_getpages: I/O read error | |
| vm_fault: pager read error, pid 1 (init) | |
| mmcsd0: Error indicated: 1 Timeout | |
| g_vfs_done():mmcsd0s2a[READ(offset=1116180480, length=4096)]error = 5 | |
| vnode_pager_getpages: I/O read error | |
| vm_fault: pager read error, pid 1 (init) | |
| mmcsd0: Error indicated: 1 Timeout | |
| g_vfs_done():mmcsd0s2a[READ(offset=1116180480, length=4096)]error = 5 | |
| vnode_pager_getpages: I/O read error | |
| vm_fault: pager read error, pid 1 (init) | |
| mmcsd0: Error indicated: 1 Timeout | |
| g_vfs_done():mmcsd0s2a[READ(offset=1116180480, length=4096)]error = 5 | |
| vnode_pager_getpages: I/O read error | |
| vm_fault: pager read error, pid 1 (init) | |
| mmcsd0: Error indicated: 1 Timeout | |
| g_vfs_done():mmcsd0s2a[READ(offset=1116180480, length=4096)]error = 5 | |
| vnode_pager_getpages: I/O read error | |
| vm_fault: pager read error, pid 1 (init) | |
| mmcsd0: Error indicated: 1 Timeout | |
| g_vfs_done():mmcsd0s2a[READ(offset=1116180480, length=4096)]error = 5 | |
| vnode_pager_getpages: I/O read error | |
| vm_fault: pager read error, pid 1 (init) | |
| mmcsd0: Error indicated: 1 Timeout | |
| g_vfs_done():mmcsd0s2a[READ(offset=1116180480, length=4096)]error = 5 | |
| vnode_pager_getpages: I/O read error | |
| vm_fault: pager read error, pid 1 (init) | |
| mmcsd0: Error indicated: 1 Timeout | |
| g_vfs_done():mmcsd0s2a[READ(offset=1116180480, length=4096)]error = 5 | |
| vnode_pager_getpages: I/O read error | |
| vm_fault: pager read error, pid 1 (init) | |
| mmcsd0: Error indicated: 1 Timeout | |
| g_vfs_done():mmcsd0s2a[READ(offset=1116180480, length=4096)]error = 5 | |
| vnode_pager_getpages: I/O read error | |
| vm_fault: pager read error, pid 1 (init) | |
| mmcsd0: Error indicated: 1 Timeout | |
| g_vfs_done():mmcsd0s2a[READ(offset=1116180480, length=4096)]error = 5 | |
| vnode_pager_getpages: I/O read error | |
| vm_fault: pager read error, pid 1 (init) | |
| mmcsd0: Error indicated: 1 Timeout | |
| g_vfs_done():mmcsd0s2a[READ(offset=1116180480, length=4096)]error = 5 | |
| vnode_pager_getpages: I/O read error | |
| vm_fault: pager read error, pid 1 (init) | |
| mmcsd0: Error indicated: 1 Timeout | |
| g_vfs_done():mmcsd0s2a[READ(offset=1116180480, length=4096)]error = 5 | |
| vnode_pager_getpages: I/O read error | |
| vm_fault: pager read error, pid 1 (init) | |
| mmcsd0: Error indicated: 1 Timeout | |
| g_vfs_done():mmcsd0s2a[READ(offset=1116180480, length=4096)]error = 5 | |
| vnode_pager_getpages: I/O read error | |
| vm_fault: pager read error, pid 1 (init) | |
| mmcsd0: Error indicated: 1 Timeout | |
| g_vfs_done():mmcsd0s2a[READ(offset=1116180480, length=4096)]error = 5 | |
| vnode_pager_getpages: I/O read error | |
| vm_fault: pager read error, pid 1 (init) | |
| mmcsd0: Error indicated: 1 Timeout | |
| g_vfs_done():mmcsd0s2a[READ(offset=1116180480, length=4096)]error = 5 | |
| vnode_pager_getpages: I/O read error | |
| vm_fault: pager read error, pid 1 (init) | |
| mmcsd0: Error indicated: 1 Timeout | |
| g_vfs_done():mmcsd0s2a[READ(offset=1116180480, length=4096)]error = 5 | |
| vnode_pager_getpages: I/O read error | |
| vm_fault: pager read error, pid 1 (init) | |
| mmcsd0: Error indicated: 1 Timeout | |
| g_vfs_done():mmcsd0s2a[READ(offset=1116180480, length=4096)]error = 5 | |
| vnode_pager_getpages: I/O read error | |
| vm_fault: pager read error, pid 1 (init) | |
| mmcsd0: Error indicated: 1 Timeout | |
| g_vfs_done():mmcsd0s2a[READ(offset=1116180480, length=4096)]error = 5 | |
| vnode_pager_getpages: I/O read error | |
| vm_fault: pager read error, pid 1 (init) | |
| mmcsd0: Error indicated: 1 Timeout | |
| g_vfs_done():mmcsd0s2a[READ(offset=1116180480, length=4096)]error = 5 | |
| vnode_pager_getpages: I/O read error | |
| vm_fault: pager read error, pid 1 (init) | |
| mmcsd0: Error indicated: 1 Timeout | |
| g_vfs_done():mmcsd0s2a[READ(offset=1116180480, length=4096)]error = 5 | |
| vnode_pager_getpages: I/O read error | |
| vm_fault: pager read error, pid 1 (init) | |
| mmcsd0: Error indicated: 1 Timeout | |
| g_vfs_done():mmcsd0s2a[READ(offset=1116180480, length=4096)]error = 5 | |
| vnode_pager_getpages: I/O read error | |
| vm_fault: pager read error, pid 1 (init) | |
| mmcsd0: Error indicated: 1 Timeout | |
| g_vfs_done():mmcsd0s2a[READ(offset=1116180480, length=4096)]error = 5 | |
| vnode_pager_getpages: I/O read error | |
| vm_fault: pager read error, pid 1 (init) | |
| mmcsd0: Error indicated: 1 Timeout | |
| g_vfs_done():mmcsd0s2a[READ(offset=1116180480, length=4096)]error = 5 | |
| vnode_pager_getpages: I/O read error | |
| vm_fault: pager read error, pid 1 (init) | |
| mmcsd0: Error indicated: 1 Timeout | |
| g_vfs_done():mmcsd0s2a[READ(offset=1116180480, length=4096)]error = 5 | |
| vnode_pager_getpages: I/O read error | |
| vm_fault: pager read error, pid 1 (init) | |
| mmcsd0: Error indicated: 1 Timeout | |
| g_vfs_done():mmcsd0s2a[READ(offset=1116180480, length=4096)]error = 5 | |
| vnode_pager_getpages: I/O read error | |
| vm_fault: pager read error, pid 1 (init) | |
| mmcsd0: Error indicated: 1 Timeout | |
| g_vfs_done():mmcsd0s2a[READ(offset=1116180480, length=4096)]error = 5 | |
| vnode_pager_getpages: I/O read error | |
| vm_fault: pager read error, pid 1 (init) | |
| mmcsd0: Error indicated: 1 Timeout | |
| g_vfs_done():mmcsd0s2a[READ(offset=1116180480, length=4096)]error = 5 | |
| vnode_pager_getpages: I/O read error | |
| vm_fault: pager read error, pid 1 (init) | |
| mmcsd0: Error indicated: 1 Timeout | |
| g_vfs_done():mmcsd0s2a[READ(offset=1116180480, length=4096)]error = 5 | |
| vnode_pager_getpages: I/O read error | |
| vm_fault: pager read error, pid 1 (init) | |
| mmcsd0: Error indicated: 1 Timeout | |
| g_vfs_done():mmcsd0s2a[READ(offset=1116180480, length=4096)]error = 5 | |
| vnode_pager_getpages: I/O read error | |
| vm_fault: pager read error, pid 1 (init) | |
| mmcsd0: Error indicated: 1 Timeout | |
| g_vfs_done():mmcsd0s2a[READ(offset=1116180480, length=4096)]error = 5 | |
| vnode_pager_getpages: I/O read error | |
| vm_fault: pager read error, pid 1 (init) | |
| mmcsd0: Error indicated: 1 Timeout | |
| g_vfs_done():mmcsd0s2a[READ(offset=1116180480, length=4096)]error = 5 | |
| vnode_pager_getpages: I/O read error | |
| vm_fault: pager read error, pid 1 (init) | |
| mmcsd0: Error indicated: 1 Timeout | |
| g_vfs_done():mmcsd0s2a[READ(offset=1116180480, length=4096)]error = 5 | |
| vnode_pager_getpages: I/O read error | |
| vm_fault: pager read error, pid 1 (init) | |
| mmcsd0: Error indicated: 1 Timeout | |
| g_vfs_done():mmcsd0s2a[READ(offset=1116180480, length=4096)]error = 5 | |
| vnode_pager_getpages: I/O read error | |
| vm_fault: pager read error, pid 1 (init) | |
| mmcsd0: Error indicated: 1 Timeout | |
| g_vfs_done():mmcsd0s2a[READ(offset=1116180480, length=4096)]error = 5 | |
| vnode_pager_getpages: I/O read error | |
| vm_fault: pager read error, pid 1 (init) | |
| mmcsd0: Error indicated: 1 Timeout | |
| g_vfs_done():mmcsd0s2a[READ(offset=1116180480, length=4096)]error = 5 | |
| vnode_pager_getpages: I/O read error | |
| vm_fault: pager read error, pid 1 (init) | |
| mmcsd0: Error indicated: 1 Timeout | |
| g_vfs_done():mmcsd0s2a[READ(offset=1116180480, length=4096)]error = 5 | |
| vnode_pager_getpages: I/O read error | |
| vm_fault: pager read error, pid 1 (init) | |
| mmcsd0: Error indicated: 1 Timeout | |
| g_vfs_done():mmcsd0s2a[READ(offset=1116180480, length=4096)]error = 5 | |
| vnode_pager_getpages: I/O read error | |
| vm_fault: pager read error, pid 1 (init) | |
| mmcsd0: Error indicated: 1 Timeout | |
| g_vfs_done():mmcsd0s2a[READ(offset=1116180480, length=4096)]error = 5 | |
| vnode_pager_getpages: I/O read error | |
| vm_fault: pager read error, pid 1 (init) | |
| mmcsd0: Error indicated: 1 Timeout | |
| g_vfs_done():mmcsd0s2a[READ(offset=1116180480, length=4096)]error = 5 | |
| vnode_pager_getpages: I/O read error | |
| vm_fault: pager read error, pid 1 (init) | |
| mmcsd0: Error indicated: 1 Timeout | |
| g_vfs_done():mmcsd0s2a[READ(offset=1116180480, length=4096)]error = 5 | |
| vnode_pager_getpages: I/O read error | |
| vm_fault: pager read error, pid 1 (init) | |
| mmcsd0: Error indicated: 1 Timeout | |
| g_vfs_done():mmcsd0s2a[READ(offset=1116180480, length=4096)]error = 5 | |
| vnode_pager_getpages: I/O read error | |
| vm_fault: pager read error, pid 1 (init) | |
| mmcsd0: Error indicated: 1 Timeout | |
| g_vfs_done():mmcsd0s2a[READ(offset=1116180480, length=4096)]error = 5 | |
| vnode_pager_getpages: I/O read error | |
| vm_fault: pager read error, pid 1 (init) | |
| mmcsd0: Error indicated: 1 Timeout | |
| g_vfs_done():mmcsd0s2a[READ(offset=1116180480, length=4096)]error = 5 | |
| vnode_pager_getpages: I/O read error | |
| vm_fault: pager read error, pid 1 (init) | |
| mmcsd0: Error indicated: 1 Timeout | |
| g_vfs_done():mmcsd0s2a[READ(offset=1116180480, length=4096)]error = 5 | |
| vnode_pager_getpages: I/O read error | |
| vm_fault: pager read error, pid 1 (init) | |
| mmcsd0: Error indicated: 1 Timeout | |
| g_vfs_done():mmcsd0s2a[READ(offset=1116180480, length=4096)]error = 5 | |
| vnode_pager_getpages: I/O read error | |
| vm_fault: pager read error, pid 1 (init) | |
| mmcsd0: Error indicated: 1 Timeout | |
| g_vfs_done():mmcsd0s2a[READ(offset=1116180480, length=4096)]error = 5 | |
| vnode_pager_getpages: I/O read error | |
| vm_fault: pager read error, pid 1 (init) | |
| mmcsd0: Error indicated: 1 Timeout | |
| g_vfs_done():mmcsd0s2a[READ(offset=1116180480, length=4096)]error = 5 | |
| vnode_pager_getpages: I/O read error | |
| vm_fault: pager read error, pid 1 (init) | |
| mmcsd0: Error indicated: 1 Timeout | |
| g_vfs_done():mmcsd0s2a[READ(offset=1116180480, length=4096)]error = 5 | |
| vnode_pager_getpages: I/O read error | |
| vm_fault: pager read error, pid 1 (init) | |
| mmcsd0: Error indicated: 1 Timeout | |
| g_vfs_done():mmcsd0s2a[READ(offset=1116180480, length=4096)]error = 5 | |
| vnode_pager_getpages: I/O read error | |
| vm_fault: pager read error, pid 1 (init) | |
| mmcsd0: Error indicated: 1 Timeout | |
| g_vfs_done():mmcsd0s2a[READ(offset=1116180480, length=4096)]error = 5 | |
| vnode_pager_getpages: I/O read error | |
| vm_fault: pager read error, pid 1 (init) | |
| mmcsd0: Error indicated: 1 Timeout | |
| g_vfs_done():mmcsd0s2a[READ(offset=1116180480, length=4096)]error = 5 | |
| vnode_pager_getpages: I/O read error | |
| vm_fault: pager read error, pid 1 (init) | |
| mmcsd0: Error indicated: 1 Timeout | |
| g_vfs_done():mmcsd0s2a[READ(offset=1116180480, length=4096)]error = 5 | |
| vnode_pager_getpages: I/O read error | |
| vm_fault: pager read error, pid 1 (init) | |
| mmcsd0: Error indicated: 1 Timeout | |
| g_vfs_done():mmcsd0s2a[READ(offset=1116180480, length=4096)]error = 5 | |
| vnode_pager_getpages: I/O read error | |
| vm_fault: pager read error, pid 1 (init) | |
| mmcsd0: Error indicated: 1 Timeout | |
| g_vfs_done():mmcsd0s2a[READ(offset=1116180480, length=4096)]error = 5 | |
| vnode_pager_getpages: I/O read error | |
| vm_fault: pager read error, pid 1 (init) | |
| mmcsd0: Error indicated: 1 Timeout | |
| g_vfs_done():mmcsd0s2a[READ(offset=1116180480, length=4096)]error = 5 | |
| vnode_pager_getpages: I/O read error | |
| vm_fault: pager read error, pid 1 (init) | |
| mmcsd0: Error indicated: 1 Timeout | |
| g_vfs_done():mmcsd0s2a[READ(offset=1116180480, length=4096)]error = 5 | |
| vnode_pager_getpages: I/O read error | |
| vm_fault: pager read error, pid 1 (init) | |
| mmcsd0: Error indicated: 1 Timeout | |
| g_vfs_done():mmcsd0s2a[READ(offset=1116180480, length=4096)]error = 5 | |
| vnode_pager_getpages: I/O read error | |
| vm_fault: pager read error, pid 1 (init) | |
| mmcsd0: Error indicated: 1 Timeout | |
| g_vfs_done():mmcsd0s2a[READ(offset=1116180480, length=4096)]error = 5 | |
| vnode_pager_getpages: I/O read error | |
| vm_fault: pager read error, pid 1 (init) | |
| mmcsd0: Error indicated: 1 Timeout | |
| g_vfs_done():mmcsd0s2a[READ(offset=1116180480, length=4096)]error = 5 | |
| vnode_pager_getpages: I/O read error | |
| vm_fault: pager read error, pid 1 (init) | |
| mmcsd0: Error indicated: 1 Timeout | |
| g_vfs_done():mmcsd0s2a[READ(offset=1116180480, length=4096)]error = 5 | |
| vnode_pager_getpages: I/O read error | |
| vm_fault: pager read error, pid 1 (init) | |
| mmcsd0: Error indicated: 1 Timeout | |
| g_vfs_done():mmcsd0s2a[READ(offset=1116180480, length=4096)]error = 5 | |
| vnode_pager_getpages: I/O read error |
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment