Created
June 14, 2021 04:32
-
-
Save sergev/724dd85d02c73d01fd019083fd43f8c6 to your computer and use it in GitHub Desktop.
Start Debian Linux on Nezha board with RISC-V processor
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
| Connecting to /dev/tty.usbserial-A50285BI, speed 115200 | |
| Escape character: Ctrl-^ (ASCII 30, RS): enabled | |
| Type the escape character followed by C to get back, | |
| or followed by ? to see other options. | |
| ---------------------------------------------------- | |
| [125]HELLO! BOOT0 is starting! | |
| [128]BOOT0 commit : 27369ab | |
| [130]set pll start | |
| [132]periph0 has been enabled | |
| [135]set pll end | |
| [139]board init ok | |
| [141]DRAM only have internal ZQ!! | |
| [177]rank1 config same as rank0 | |
| [180]DRAM BOOT DRIVE INFO: V0.24 | |
| [183]DRAM CLK = 792 MHz | |
| [185]DRAM Type = 3 (2:DDR2,3:DDR3) | |
| [189]DRAMC ZQ value: 0x7b7bfb | |
| [191]DRAM ODT value: 0x42. | |
| [194]ddr_efuse_type: 0x0 | |
| [197]DRAM SIZE =1024 M | |
| [201]DRAM simple test OK. | |
| [203]dram size =1024 | |
| [205]card no is 0 | |
| [207]sdcard 0 line count 4 | |
| [209][mmc]: mmc driver ver 2021-04-2 16:45 | |
| [218][mmc]: Wrong media type 0x0 | |
| [221][mmc]: ***Try SD card 0*** | |
| [230][mmc]: HSSDR52/SDR25 4 bit | |
| [233][mmc]: 50000000 Hz | |
| [235][mmc]: 14832 MB | |
| [237][mmc]: ***SD/MMC 0 init OK!!!*** | |
| [285]Loading boot-pkg Succeed(index=0). | |
| [288]Entry_name = opensbi | |
| [291]Entry_name = u-boot | |
| [295]Entry_name = dtb | |
| [297]mmc not para | |
| [299]Jump to second Boot. | |
| OpenSBI v0.6 | |
| ____ _____ ____ _____ | |
| / __ \ / ____| _ \_ _| | |
| | | | |_ __ ___ _ __ | (___ | |_) || | | |
| | | | | '_ \ / _ \ '_ \ \___ \| _ < | | | |
| | |__| | |_) | __/ | | |____) | |_) || |_ | |
| \____/| .__/ \___|_| |_|_____/|____/_____| | |
| | | | |
| |_| | |
| Platform Name : T-HEAD Xuantie Platform | |
| Platform HART Features : RV64ACDFIMSUVX | |
| Platform Max HARTs : 1 | |
| Current Hart : 0 | |
| Firmware Base : 0x40000400 | |
| Firmware Size : 75 KB | |
| Runtime SBI Version : 0.2 | |
| MIDELEG : 0x0000000000000222 | |
| MEDELEG : 0x000000000000b1ff | |
| PMP0 : 0x0000000040000000-0x000000004001ffff (A) | |
| PMP1 : 0x0000000040000000-0x000000007fffffff (A,R,W,X) | |
| PMP2 : 0x0000000000000000-0x0000000007ffffff (A,R,W) | |
| PMP3 : 0x0000000009000000-0x000000000901ffff (? | |
| U-Boot 2018.05-g0a88ac9 (Apr 30 2021 - 11:23:28 +0000) Allwinner Technology | |
| [00.381]DRAM: 1 GiB | |
| [00.383]Relocation Offset is: 3def0000 | |
| [00.388]secure enable bit: 0 | |
| [00.390]CPU=1008 MHz,PLL6=600 Mhz,AHB=200 Mhz, APB1=100Mhz MBus=300Mhz | |
| [00.396]flash init start | |
| [00.399]workmode = 0,storage type = 1 | |
| [00.402][mmc]: mmc driver ver uboot2018:2021-04-16 14:23:00-1 | |
| [00.408][mmc]: get sdc_type fail and use default host:tm1. | |
| [00.414][mmc]: can't find node "mmc0",will add new node | |
| [00.423][mmc]: Using default timing para | |
| [00.426][mmc]: SUNXI SDMMC Controller Version:0x50310 | |
| [00.444][mmc]: card_caps:0x3000000a | |
| [00.447][mmc]: host_caps:0x3000003f | |
| [00.450]sunxi flash init ok | |
| [00.453]line:714 init_clocks | |
| [00.463]drv_disp_init | |
| request pwm success, pwm2:pwm2:0x2000c00. | |
| [00.480]drv_disp_init finish | |
| [00.482]boot_gui_init:start | |
| [00.500]Get Reserve0 partition number fail! | |
| [00.504]set disp.dev2_output_type fail. using defval=0 | |
| hdmi hpd out, force open? | |
| [00.511]boot_gui_init:finish | |
| 54 bytes read in 1 ms (52.7 KiB/s) | |
| [00.536]bmp_name=bootlogo.bmp size 38454 | |
| 38454 bytes read in 4 ms (9.2 MiB/s) | |
| [00.567]Loading Environment from SUNXI_FLASH... OK | |
| [00.612]sunxi secure storage is not supported | |
| [00.616]usb burn from boot | |
| delay time 0 | |
| weak:otg_phy_config | |
| [00.627]usb prepare ok | |
| [01.430]overtime | |
| [01.434]do_burn_from_boot usb : no usb exist | |
| root_partition is rootfs | |
| set root to /dev/mmcblk0p7 | |
| [01.443]update part info | |
| [01.447]update bootcmd | |
| [01.450]change working_fdt 0x7eaafda8 to 0x7ea8fda8 | |
| [01.471]update dts | |
| Hit any key to stop autoboot: 0 | |
| dsp0:gpio init config fail | |
| DSP0 start ok, img length 263580, booting from 0x400660 | |
| Android's image name: d1-nezha | |
| No reserved memory region found in source FDT | |
| [01.927] | |
| Starting kernel ... | |
| [01.929][mmc]: MMC Device 2 not found | |
| [01.933][mmc]: mmc 2 not find, so not exit | |
| [ 0.000000] OF: fdt: Ignoring memory range 0x40000000 - 0x40200000 | |
| [ 0.000000] Linux version 5.4.61 (nihao@1e378726e6db) (riscv64-unknown-linux-gnu-gcc (C-SKY RISCV Tools V1.8.4 B20200702) 8.1.0, GNU ld (GNU Binutils) 2.32) #68 PREEMPT Tue Jun 1 04:18:22 UTC 2021 | |
| [ 0.000000] cma: Reserved 8 MiB at 0x000000007f800000 | |
| [ 0.000000] Zone ranges: | |
| [ 0.000000] DMA32 [mem 0x0000000040200000-0x000000007fffffff] | |
| [ 0.000000] Normal empty | |
| [ 0.000000] Movable zone start for each node | |
| [ 0.000000] Early memory node ranges | |
| [ 0.000000] node 0: [mem 0x0000000040200000-0x000000007fffffff] | |
| [ 0.000000] Initmem setup node 0 [mem 0x0000000040200000-0x000000007fffffff] | |
| [ 0.000000] On node 0 totalpages: 261632 | |
| [ 0.000000] DMA32 zone: 3577 pages used for memmap | |
| [ 0.000000] DMA32 zone: 0 pages reserved | |
| [ 0.000000] DMA32 zone: 261632 pages, LIFO batch:63 | |
| [ 0.000000] elf_hwcap is 0x20112d | |
| [ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768 | |
| [ 0.000000] pcpu-alloc: [0] 0 | |
| [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 258055 | |
| [ 0.000000] Kernel command line: earlyprintk=sunxi-uart,0x02500000 clk_ignore_unused initcall_debug=0 console=ttyS0,115200 loglevel=8 root=/dev/mmcblk0p7 init=/sbin/init partitions=boot-resource@mmcblk0p1:env@mmcblk0p2:env-redund@mmcblk0p3:boot@mmcblk0p4:dsp0@mmcblk0p5:recovery@mmcblk0p6:rootfs@mmcblk0p7:UDISK@mmcblk0p8 cma=8M snum= mac_addr= wifi_mac= bt_mac= specialstr= gpt=1 androidboot.hardware=sun20iw1p1 boot_type=1 androidboot.boot_type=1 gpt=1 uboot_message=2018.05-g0a88ac9(04/30/2021-11:23:28) mbr_offset=1556480 disp_reserve=82944 | |
| [ 0.000000] Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes, linear) | |
| [ 0.000000] Inode-cache hash table entries: 65536 (order: 7, 524288 bytes, linear) | |
| [ 0.000000] Sorting __ex_table... | |
| [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off | |
| [ 0.000000] Memory: 1003688K/1046528K available (6120K kernel code, 664K rwdata, 2110K rodata, 212K init, 254K bss, 34648K reserved, 8192K cma-reserved) | |
| [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 | |
| [ 0.000000] rcu: Preemptible hierarchical RCU implementation. | |
| [ 0.000000] Tasks RCU enabled. | |
| [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies. | |
| [ 0.000000] NR_IRQS: 0, nr_irqs: 0, preallocated irqs: 0 | |
| [ 0.000000] plic: mapped 200 interrupts with 1 handlers for 2 contexts. | |
| [ 0.000000] riscv_timer_init_dt: Registering clocksource cpuid [0] hartid [0] | |
| [ 0.000000] clocksource: riscv_clocksource: mask: 0xffffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns | |
| [ 0.000006] sched_clock: 64 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns | |
| [ 0.000024] riscv_timer_clockevent depends on broadcast, but no broadcast function available | |
| [ 0.000315] clocksource: timer: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635851949 ns | |
| [ 0.000911] Console: colour dummy device 80x25 | |
| [ 0.000951] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=240000) | |
| [ 0.000969] pid_max: default: 32768 minimum: 301 | |
| [ 0.001146] Mount-cache hash table entries: 2048 (order: 2, 16384 bytes, linear) | |
| [ 0.001169] Mountpoint-cache hash table entries: 2048 (order: 2, 16384 bytes, linear) | |
| [ 0.002888] ASID allocator initialised with 65536 entries | |
| [ 0.003051] rcu: Hierarchical SRCU implementation. | |
| [ 0.003720] devtmpfs: initialized | |
| [ 0.018060] random: get_random_u32 called from bucket_table_alloc.isra.31+0x4e/0x15e with crng_init=0 | |
| [ 0.018919] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns | |
| [ 0.018950] futex hash table entries: 256 (order: 0, 6144 bytes, linear) | |
| [ 0.019385] pinctrl core: initialized pinctrl subsystem | |
| [ 0.020701] NET: Registered protocol family 16 | |
| [ 0.022494] DMA: preallocated 256 KiB pool for atomic allocations | |
| [ 0.023075] cpuidle: using governor menu | |
| [ 0.064651] rtc_ccu: sunxi ccu init OK | |
| [ 0.071764] clock: sunxi ccu init OK | |
| [ 0.102063] iommu: Default domain type: Translated | |
| [ 0.102236] sunxi iommu: irq = 4 | |
| [ 0.103340] SCSI subsystem initialized | |
| [ 0.103630] usbcore: registered new interface driver usbfs | |
| [ 0.103714] usbcore: registered new interface driver hub | |
| [ 0.103812] usbcore: registered new device driver usb | |
| [ 0.103970] mc: Linux media interface: v0.10 | |
| [ 0.104020] videodev: Linux video capture interface: v2.00 | |
| [ 0.105066] sunxi-msgbox-amp 3003000.msgbox: invalid resource | |
| [ 0.105709] Advanced Linux Sound Architecture Driver Initialized. | |
| [ 0.106257] Bluetooth: Core ver 2.22 | |
| [ 0.106330] NET: Registered protocol family 31 | |
| [ 0.106339] Bluetooth: HCI device and connection manager initialized | |
| [ 0.106360] Bluetooth: HCI socket layer initialized | |
| [ 0.106377] Bluetooth: L2CAP socket layer initialized | |
| [ 0.106409] Bluetooth: SCO socket layer initialized | |
| [ 0.106667] pwm module init! | |
| [ 0.108183] g2d 5410000.g2d: Adding to iommu group 0 | |
| [ 0.108661] G2D: rcq version initialized.major:250 | |
| [ 0.109325] input: sunxi-keyboard as /devices/virtual/input/input0 | |
| [ 0.110837] clocksource: Switched to clocksource riscv_clocksource | |
| [ 0.122198] sun8iw20-pinctrl 2000000.pinctrl: initialized sunXi PIO driver | |
| [ 0.137199] NET: Registered protocol family 2 | |
| [ 0.137957] tcp_listen_portaddr_hash hash table entries: 512 (order: 1, 8192 bytes, linear) | |
| [ 0.138013] TCP established hash table entries: 8192 (order: 4, 65536 bytes, linear) | |
| [ 0.138117] TCP bind hash table entries: 8192 (order: 4, 65536 bytes, linear) | |
| [ 0.138200] TCP: Hash tables configured (established 8192 bind 8192) | |
| [ 0.138372] UDP hash table entries: 512 (order: 2, 16384 bytes, linear) | |
| [ 0.138430] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes, linear) | |
| [ 0.138657] NET: Registered protocol family 1 | |
| [ 0.141229] Initialise system trusted keyrings | |
| [ 0.141449] workingset: timestamp_bits=62 max_order=18 bucket_order=0 | |
| [ 0.148169] squashfs: version 4.0 (2009/01/31) Phillip Lougher | |
| [ 0.169463] Key type asymmetric registered | |
| [ 0.169478] Asymmetric key parser 'x509' registered | |
| [ 0.169500] io scheduler mq-deadline registered | |
| [ 0.169510] io scheduler kyber registered | |
| [ 0.169529] atomic64_test: passed | |
| [ 0.170724] [DISP]disp_module_init | |
| [ 0.171334] disp 5000000.disp: Adding to iommu group 0 | |
| [ 0.171955] [DISP] disp_init,line:2385: | |
| [ 0.171961] smooth display screen:1 type:207 mode:129 | |
| [ 0.196572] @@@lcd_x=1920, lcd_y=1080 | |
| [ 0.207253] @@@ screen id=1 | |
| [ 0.207267] ###ow=888, oh=480 | |
| [ 0.207275] display_fb_request,fb_id:0 | |
| [ 0.262354] ##in here1 | |
| [ 0.262367] ##in here2 | |
| [ 0.262376] #########ow=1, sw=1920; oh=1, sh=1080 | |
| [ 0.263142] [DISP]disp_module_init finish | |
| [ 0.264098] sunxi_sid_init()506 - insmod ok | |
| [ 0.264668] pwm-regulator: supplied by regulator-dummy | |
| [ 0.271665] sun8iw20-pinctrl 2000000.pinctrl: 2000000.pinctrl supply vcc-pb not found, using dummy regulator | |
| [ 0.272206] uart uart0: get regulator failed | |
| [ 0.272236] uart uart0: uart0 supply uart not found, using dummy regulator | |
| [ 0.272574] uart0: ttyS0 at MMIO 0x2500000 (irq = 18, base_baud = 1500000) is a SUNXI | |
| [ 0.272600] sw_console_setup()1808 - console setup baud 115200 parity n bits 8, flow n | |
| [ 1.026017] printk: console [ttyS0] enabled | |
| [ 1.031561] sun8iw20-pinctrl 2000000.pinctrl: 2000000.pinctrl supply vcc-pg not found, using dummy regulator | |
| [ 1.042954] uart uart1: get regulator failed | |
| [ 1.047736] uart uart1: uart1 supply uart not found, using dummy regulator | |
| [ 1.055789] uart1: ttyS1 at MMIO 0x2500400 (irq = 19, base_baud = 1500000) is a SUNXI | |
| [ 1.065699] misc dump reg init | |
| [ 1.069899] sunxi-rfkill soc@3000000:rfkill@0: module version: v1.0.9 | |
| [ 1.077139] sunxi-rfkill soc@3000000:rfkill@0: devm_pinctrl_get() failed! | |
| [ 1.084742] sunxi-rfkill soc@3000000:rfkill@0: get gpio chip_en failed | |
| [ 1.092055] sunxi-rfkill soc@3000000:rfkill@0: get gpio power_en failed | |
| [ 1.099441] sunxi-rfkill soc@3000000:rfkill@0: wlan_busnum (1) | |
| [ 1.105968] sunxi-rfkill soc@3000000:rfkill@0: Missing wlan_power. | |
| [ 1.112899] sunxi-rfkill soc@3000000:rfkill@0: wlan clock[0] (32k-fanout1) | |
| [ 1.120591] sunxi-rfkill soc@3000000:rfkill@0: wlan_regon gpio=204 assert=1 | |
| [ 1.128447] sunxi-rfkill soc@3000000:rfkill@0: wlan_hostwake gpio=202 assert=1 | |
| [ 1.136569] sunxi-rfkill soc@3000000:rfkill@0: wakeup source is enabled | |
| [ 1.144190] sunxi-rfkill soc@3000000:rfkill@0: Missing bt_power. | |
| [ 1.150949] sunxi-rfkill soc@3000000:rfkill@0: bt clock[0] (32k-fanout1) | |
| [ 1.158451] sunxi-rfkill soc@3000000:rfkill@0: bt_rst gpio=210 assert=0 | |
| [ 1.166718] [ADDR_MGT] addr_mgt_probe: module version: v1.0.9 | |
| [ 1.174287] [ADDR_MGT] addr_mgt_probe: success. | |
| [ 1.180577] libphy: Fixed MDIO Bus: probed | |
| [ 1.185229] CAN device driver interface | |
| [ 1.190563] sun8iw20-pinctrl 2000000.pinctrl: 2000000.pinctrl supply vcc-pe not found, using dummy regulator | |
| [ 1.201877] sunxi gmac driver's version: 1.0.0 | |
| [ 1.206968] gmac-power0: NULL | |
| [ 1.210275] gmac-power1: NULL | |
| [ 1.213625] gmac-power2: NULL | |
| [ 1.218148] Failed to alloc md5 | |
| [ 1.221746] eth0: Use random mac address | |
| [ 1.226484] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver | |
| [ 1.233865] sunxi-ehci: EHCI SUNXI driver | |
| [ 1.238904] get ehci1-controller wakeup-source is fail. | |
| [ 1.244940] sunxi ehci1-controller don't init wakeup source | |
| [ 1.251243] [sunxi-ehci1]: probe, pdev->name: 4200000.ehci1-controller, sunxi_ehci: 0xffffffe000912010, 0x:ffffffd0040c5000, irq_no:31 | |
| [ 1.264806] sunxi-ehci 4200000.ehci1-controller: 4200000.ehci1-controller supply drvvbus not found, using dummy regulator | |
| [ 1.277375] sunxi-ehci 4200000.ehci1-controller: EHCI Host Controller | |
| [ 1.284633] sunxi-ehci 4200000.ehci1-controller: new USB bus registered, assigned bus number 1 | |
| [ 1.294449] sunxi-ehci 4200000.ehci1-controller: irq 49, io mem 0x04200000 | |
| [ 1.330878] sunxi-ehci 4200000.ehci1-controller: USB 2.0 started, EHCI 1.00 | |
| [ 1.339521] hub 1-0:1.0: USB hub found | |
| [ 1.343824] hub 1-0:1.0: 1 port detected | |
| [ 1.348992] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver | |
| [ 1.355987] sunxi-ohci: OHCI SUNXI driver | |
| [ 1.361096] get ohci1-controller wakeup-source is fail. | |
| [ 1.367038] sunxi ohci1-controller don't init wakeup source | |
| [ 1.373300] [sunxi-ohci1]: probe, pdev->name: 4200400.ohci1-controller, sunxi_ohci: 0xffffffe000912b50 | |
| [ 1.383729] sunxi-ohci 4200400.ohci1-controller: 4200400.ohci1-controller supply drvvbus not found, using dummy regulator | |
| [ 1.396226] sunxi-ohci 4200400.ohci1-controller: OHCI Host Controller | |
| [ 1.403483] sunxi-ohci 4200400.ohci1-controller: new USB bus registered, assigned bus number 2 | |
| [ 1.413263] sunxi-ohci 4200400.ohci1-controller: irq 50, io mem 0x04200400 | |
| [ 1.495744] hub 2-0:1.0: USB hub found | |
| [ 1.499976] hub 2-0:1.0: 1 port detected | |
| [ 1.505422] usbcore: registered new interface driver uas | |
| [ 1.511575] usbcore: registered new interface driver usb-storage | |
| [ 1.518333] usbcore: registered new interface driver ums-alauda | |
| [ 1.525076] usbcore: registered new interface driver ums-cypress | |
| [ 1.531880] usbcore: registered new interface driver ums-datafab | |
| [ 1.538645] usbcore: registered new interface driver ums_eneub6250 | |
| [ 1.545639] usbcore: registered new interface driver ums-freecom | |
| [ 1.552437] usbcore: registered new interface driver ums-isd200 | |
| [ 1.559090] usbcore: registered new interface driver ums-jumpshot | |
| [ 1.565983] usbcore: registered new interface driver ums-karma | |
| [ 1.572586] usbcore: registered new interface driver ums-onetouch | |
| [ 1.579455] usbcore: registered new interface driver ums-realtek | |
| [ 1.586266] usbcore: registered new interface driver ums-sddr09 | |
| [ 1.592976] usbcore: registered new interface driver ums-sddr55 | |
| [ 1.599631] usbcore: registered new interface driver ums-usbat | |
| [ 1.607271] sunxi_gpadc_init,1968, success | |
| [ 1.612798] sunxi-rtc 7090000.rtc: errata__fix_alarm_day_reg_default_value(): ALARM0_DAY_REG=0, set it to 1 | |
| [ 1.624999] sunxi-rtc 7090000.rtc: registered as rtc0 | |
| [ 1.630748] sunxi-rtc 7090000.rtc: setting system clock to 1970-01-01T00:00:03 UTC (3) | |
| [ 1.639675] sunxi-rtc 7090000.rtc: sunxi rtc probed | |
| [ 1.645553] i2c /dev entries driver | |
| [ 1.649549] IR NEC protocol handler initialized | |
| [ 1.655353] sunxi cedar version 1.1 | |
| [ 1.659513] sunxi-cedar 1c0e000.ve: Adding to iommu group 0 | |
| [ 1.671331] VE: cedar-ve the get irq is 6 | |
| [ 1.695171] sunxi-wdt 6011000.watchdog: Watchdog enabled (timeout=16 sec, nowayout=0) | |
| [ 1.704348] Bluetooth: HCI UART driver ver 2.3 | |
| [ 1.709305] Bluetooth: HCI UART protocol H4 registered | |
| [ 1.715074] Bluetooth: HCI UART protocol BCSP registered | |
| [ 1.721020] Bluetooth: XRadio Bluetooth LPM Mode Driver Ver 1.0.10 | |
| [ 1.728302] [XR_BT_LPM] bluesleep_probe: bt_wake polarity: 1 | |
| [ 1.734719] [XR_BT_LPM] bluesleep_probe: host_wake polarity: 1 | |
| [ 1.741284] [XR_BT_LPM] bluesleep_probe: wakeup source is disabled! | |
| [ 1.741284] | |
| [ 1.749921] [XR_BT_LPM] bluesleep_probe: uart_index(1) | |
| [ 1.759330] sunxi-mmc 4020000.sdmmc: SD/MMC/SDIO Host Controller Driver(v4.19 2021-03-24 19:50) | |
| [ 1.769291] sunxi-mmc 4020000.sdmmc: ***ctl-spec-caps*** 8 | |
| [ 1.775507] sunxi-mmc 4020000.sdmmc: No vmmc regulator found | |
| [ 1.781849] sunxi-mmc 4020000.sdmmc: No vqmmc regulator found | |
| [ 1.788256] sunxi-mmc 4020000.sdmmc: No vdmmc regulator found | |
| [ 1.794684] sunxi-mmc 4020000.sdmmc: No vd33sw regulator found | |
| [ 1.801208] sunxi-mmc 4020000.sdmmc: No vd18sw regulator found | |
| [ 1.807711] sunxi-mmc 4020000.sdmmc: No vq33sw regulator found | |
| [ 1.814233] sunxi-mmc 4020000.sdmmc: No vq18sw regulator found | |
| [ 1.821182] sunxi-mmc 4020000.sdmmc: Got CD GPIO | |
| [ 1.826642] sunxi-mmc 4020000.sdmmc: set cd-gpios as 24M fail | |
| [ 1.833347] sunxi-mmc 4020000.sdmmc: sdc set ios:clk 0Hz bm PP pm UP vdd 21 width 1 timing LEGACY(SDR12) dt B | |
| [ 1.844483] sunxi-mmc 4020000.sdmmc: no vqmmc,Check if there is regulator | |
| [ 1.864622] sunxi-mmc 4020000.sdmmc: sdc set ios:clk 400000Hz bm PP pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B | |
| [ 1.889009] sunxi-mmc 4020000.sdmmc: detmode:gpio irq | |
| [ 1.894725] sunxi-mmc 4020000.sdmmc: sdc set ios:clk 400000Hz bm PP pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B | |
| [ 1.906923] sunxi-mmc 4021000.sdmmc: SD/MMC/SDIO Host Controller Driver(v4.19 2021-03-24 19:50) | |
| [ 1.916993] sunxi-mmc 4021000.sdmmc: ***ctl-spec-caps*** 8 | |
| [ 1.923242] sunxi-mmc 4021000.sdmmc: No vmmc regulator found | |
| [ 1.929598] sunxi-mmc 4021000.sdmmc: No vqmmc regulator found | |
| [ 1.936054] sunxi-mmc 4020000.sdmmc: sdc set ios:clk 400000Hz bm PP pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B | |
| [ 1.947629] sunxi-mmc 4021000.sdmmc: No vdmmc regulator found | |
| [ 1.954069] sunxi-mmc 4021000.sdmmc: No vd33sw regulator found | |
| [ 1.960572] sunxi-mmc 4021000.sdmmc: No vd18sw regulator found | |
| [ 1.967203] sunxi-mmc 4021000.sdmmc: No vq33sw regulator found | |
| [ 1.973770] sunxi-mmc 4021000.sdmmc: No vq18sw regulator found | |
| [ 1.980336] sunxi-mmc 4021000.sdmmc: Cann't get pin bias hs pinstate,check if needed | |
| [ 1.989376] sunxi-mmc 4020000.sdmmc: sdc set ios:clk 400000Hz bm PP pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B | |
| [ 2.001705] sunxi-mmc 4021000.sdmmc: sdc set ios:clk 0Hz bm PP pm UP vdd 21 width 1 timing LEGACY(SDR12) dt B | |
| [ 2.012885] sunxi-mmc 4021000.sdmmc: no vqmmc,Check if there is regulator | |
| [ 2.021780] sunxi-mmc 4020000.sdmmc: sdc set ios:clk 400000Hz bm PP pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B | |
| [ 2.033369] sunxi-mmc 4021000.sdmmc: sdc set ios:clk 400000Hz bm PP pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B | |
| [ 2.057657] sunxi-mmc 4021000.sdmmc: detmode:manually by software | |
| [ 2.065341] sunxi-mmc 4021000.sdmmc: smc 1 p1 err, cmd 52, RTO !! | |
| [ 2.072642] sun8iw20-pinctrl 2000000.pinctrl: 2000000.pinctrl supply vcc-pc not found, using dummy regulator | |
| [ 2.083632] sunxi-mmc 4021000.sdmmc: smc 1 p1 err, cmd 52, RTO !! | |
| [ 2.090513] sunxi-mmc 4021000.sdmmc: sdc set ios:clk 400000Hz bm PP pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B | |
| [ 2.102334] sunxi_led_probe()1715 - start | |
| [ 2.106830] sunxi_get_str_of_property()1560 - failed to get the string of propname led_regulator! | |
| [ 2.116914] sunxi_register_led_classdev()1448 - led_classdev start | |
| [ 2.125599] sunxi-mmc 4021000.sdmmc: sdc set ios:clk 400000Hz bm PP pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B | |
| [ 2.138982] mmc0: host does not support reading read-only switch, assuming write-enable | |
| [ 2.148965] sunxi_led_probe()1820 - finish | |
| [ 2.154174] usbcore: registered new interface driver usbhid | |
| [ 2.160389] usbhid: USB HID core driver | |
| [ 2.166556] sunxi-mmc 4020000.sdmmc: sdc set ios:clk 400000Hz bm PP pm ON vdd 21 width 1 timing SD-HS(SDR25) dt B | |
| [ 2.178015] sunxi-mmc 4021000.sdmmc: smc 1 p1 err, cmd 5, RTO !! | |
| [ 2.185022] usbcore: registered new interface driver snd-usb-audio | |
| [ 2.191933] sunxi-mmc 4021000.sdmmc: smc 1 p1 err, cmd 5, RTO !! | |
| [ 2.199529] sunxi-mmc 4021000.sdmmc: smc 1 p1 err, cmd 5, RTO !! | |
| [ 2.207122] sunxi-mmc 4021000.sdmmc: smc 1 p1 err, cmd 5, RTO !! | |
| [ 2.213902] sunxi-mmc 4021000.sdmmc: sdc set ios:clk 0Hz bm PP pm OFF vdd 0 width 1 timing LEGACY(SDR12) dt B | |
| [ 2.225085] sunxi-mmc 4020000.sdmmc: sdc set ios:clk 50000000Hz bm PP pm ON vdd 21 width 1 timing SD-HS(SDR25) dt B | |
| [ 2.238062] sun8iw20-pinctrl 2000000.pinctrl: 2000000.pinctrl supply vcc-pd not found, using dummy regulator | |
| [ 2.249339] sunxi-mmc 4020000.sdmmc: sdc set ios:clk 50000000Hz bm PP pm ON vdd 21 width 4 timing SD-HS(SDR25) dt B | |
| [ 2.262290] sunxi-daudio 2034000.daudio: regulator missing or invalid | |
| [ 2.270511] [AUDIOCODEC][sunxi_codec_parse_params][2094]:digital_vol:0, lineout_vol:26, mic1gain:31, mic2gain:31 pa_msleep:120, pa_level:1, pa_pwr_level:1 | |
| [ 2.270511] | |
| [ 2.287713] mmc0: new high speed SDHC card at address 1234 | |
| [ 2.294957] mmcblk0: mmc0:1234 SA16G 14.5 GiB | |
| [ 2.301916] [AUDIOCODEC][sunxi_codec_parse_params][2130]:adcdrc_cfg:0, adchpf_cfg:0, dacdrc_cfg:0, dachpf:0 | |
| [ 2.313527] [AUDIOCODEC][sunxi_internal_codec_probe][2266]:codec probe finished | |
| [ 2.322923] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 | |
| [ 2.328489] debugfs: Directory '203034c.dummy_cpudai' with parent 'audiocodec' already present! | |
| [ 2.340720] [SNDCODEC][sunxi_card_init][583]:card init finished | |
| [ 2.348319] sunxi-codec-machine 2030340.sound: 2030000.codec <-> 203034c.dummy_cpudai mapping ok | |
| [ 2.359463] input: audiocodec sunxi Audio Jack as /devices/platform/soc@3000000/2030340.sound/sound/card0/input1 | |
| [ 2.371527] [SNDCODEC][sunxi_card_dev_probe][832]:register card finished | |
| [ 2.379725] sunxi-rpaf-dsp soc@3000000:rpaf-dsp@203034c: register device finished! | |
| [ 2.388213] sunxi-rpaf-dsp soc@3000000:rpaf-dsp@203034c: [rpaf_dsp0] probe finished! | |
| [ 2.397283] rpmsg_hifi 3003000.msgbox.sunxi,dsp-msgbox.514.258: id:sunxi,dsp-msgbox new channel: 0x202 -> 0x102! | |
| [ 2.408842] rpmsg_hifi 3003000.msgbox.sunxi,dsp-msgbox.514.258: rpmsg hifi[0] client driver is probed | |
| [ 2.420774] NET: Registered protocol family 10 | |
| [ 2.427166] Segment Routing with IPv6 | |
| [ 2.431526] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver | |
| [ 2.438869] NET: Registered protocol family 17 | |
| [ 2.443967] can: controller area network core (rev 20170425 abi 9) | |
| [ 2.451021] NET: Registered protocol family 29 | |
| [ 2.455981] can: raw protocol (rev 20170425) | |
| [ 2.460740] can: broadcast manager protocol (rev 20170425 t) | |
| [ 2.467095] can: netlink gateway (rev 20190810) max_hops=1 | |
| [ 2.473531] Bluetooth: RFCOMM TTY layer initialized | |
| [ 2.478988] Bluetooth: RFCOMM socket layer initialized | |
| [ 2.484842] Bluetooth: RFCOMM ver 1.11 | |
| [ 2.490039] Loading compiled-in X.509 certificates | |
| [ 2.497635] HDMI 2.0 driver init start! | |
| [ 2.502000] boot_hdmi=false | |
| [ 2.505166] ERROR: pinctrl_get for HDMI2.0 DDC fail | |
| [ 2.512155] HDMI2.0 module init end | |
| [ 2.520914] [DISP] bsp_disp_sync_with_hw,line:657: | |
| [ 2.520920] Can't find device(207) for manager 1 | |
| [ 2.549755] twi twi2: twi2 supply twi not found, using dummy regulator | |
| [ 2.564494] pcf857x 2-0038: probed | |
| [ 2.568410] sunxi_i2c_probe()2262 - [i2c2] probe success | |
| [ 2.583796] debugfs: Directory '2031000.dmic' with parent 'snddmic' already present! | |
| [ 2.594046] sunxi-audio-card 2031060.sounddmic: dmic-hifi <-> 2031000.dmic mapping ok | |
| [ 2.604209] debugfs: Directory '2034000.daudio' with parent 'sndhdmi' already present! | |
| [ 2.614734] sunxi-audio-card 20340a0.sounddaudio2: 20340a4.hdmiaudio <-> 2034000.daudio mapping ok | |
| [ 2.626057] get ehci0-controller wakeup-source is fail. | |
| [ 2.632063] sunxi ehci0-controller don't init wakeup source | |
| [ 2.638284] [sunxi-ehci0]: probe, pdev->name: 4101000.ehci0-controller, sunxi_ehci: 0xffffffe000911c50, 0x:ffffffd005eee000, irq_no:2e | |
| [ 2.651813] [sunxi-ehci0]: Not init ehci0 | |
| [ 2.656760] get ohci0-controller wakeup-source is fail. | |
| [ 2.662745] sunxi ohci0-controller don't init wakeup source | |
| [ 2.668964] [sunxi-ohci0]: probe, pdev->name: 4101400.ohci0-controller, sunxi_ohci: 0xffffffe000912790 | |
| [ 2.679395] [sunxi-ohci0]: Not init ohci0 | |
| [ 2.686160] cfg80211: Loading compiled-in X.509 certificates for regulatory database | |
| [ 2.697140] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' | |
| [ 2.704740] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2 | |
| [ 2.714434] clk: Not disabling unused clocks | |
| [ 2.719202] ALSA device list: | |
| [ 2.722634] cfg80211: failed to load regulatory.db | |
| [ 2.728069] #0: audiocodec | |
| [ 2.731362] #1: snddmic | |
| [ 2.734281] #2: sndhdmi | |
| [ 2.737207] alloc_fd: slot 0 not NULL! | |
| [ 2.755792] EXT4-fs (mmcblk0p7): mounted filesystem with ordered data mode. Opts: (null) | |
| [ 2.764975] VFS: Mounted root (ext4 filesystem) readonly on device 179:7. | |
| [ 2.780545] devtmpfs: mounted | |
| [ 2.784107] Freeing unused kernel memory: 212K | |
| [ 2.789059] This architecture does not have kernel memory protection. | |
| [ 2.796293] Run /sbin/init as init process | |
| [ 3.372215] systemd[1]: System time before build time, advancing clock. | |
| [ 3.400016] systemd[1]: Failed to find module 'autofs4' | |
| [ 3.411773] cgroup2: Unknown parameter 'memory_recursiveprot' | |
| [ 3.439930] systemd[1]: systemd 247.3-5 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +ZSTD +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=unified) | |
| [ 3.465254] systemd[1]: Detected architecture riscv64. | |
| Welcome to Debian GNU/Linux 11 (bullseye)! | |
| [ 3.502535] systemd[1]: Set hostname to <nezha>. | |
| [ 3.654499] random: fast init done | |
| [ 5.012494] systemd[1]: /lib/systemd/system/plymouth-start.service:16: Unit configured to use KillMode=none. This is unsafe, as it disables systemd's process lifecycle management for the service. Please update your service to use a safer KillMode=, such as 'mixed' or 'control-group'. Support for KillMode=none is deprecated and will eventually be removed. | |
| [ 5.215799] systemd[1]: Queued start job for default target Graphical Interface. | |
| [ 5.226404] random: systemd: uninitialized urandom read (16 bytes read) | |
| [ 5.234230] systemd[1]: system-getty.slice: unit configures an IP firewall, but the local system does not support BPF/cgroup firewalling. | |
| [ 5.248161] systemd[1]: (This warning is only shown for the first unit using IP firewalling.) | |
| [ 5.259205] systemd[1]: Created slice system-getty.slice. | |
| [ OK ] Created slice system-getty.slice. | |
| [ 5.291162] random: systemd: uninitialized urandom read (16 bytes read) | |
| [ 5.299600] systemd[1]: Created slice system-modprobe.slice. | |
| [ OK ] Created slice system-modprobe.slice. | |
| [ 5.331140] random: systemd: uninitialized urandom read (16 bytes read) | |
| [ 5.339563] systemd[1]: Created slice system-serial\x2dgetty.slice. | |
| [ OK ] Created slice system-serial\x2dgetty.slice. | |
| [ 5.381886] systemd[1]: Created slice User and Session Slice. | |
| [ OK ] Created slice User and Session Slice. | |
| [ 5.421619] systemd[1]: Started Forward Password Requests to Wall Directory Watch. | |
| [ OK ] Started Forward Password R…uests to Wall Directory Watch. | |
| [ 5.461459] systemd[1]: Condition check resulted in Arbitrary Executable File Formats File System Automount Point being skipped. | |
| [ 5.475179] systemd[1]: Reached target Remote File Systems. | |
| [ OK ] Reached target Remote File Systems. | |
| [ 5.511260] systemd[1]: Reached target Slices. | |
| [ OK ] Reached target Slices. | |
| [ 5.541359] systemd[1]: Reached target Swap. | |
| [ OK ] Reached target Swap. | |
| [ 5.572274] systemd[1]: Listening on Syslog Socket. | |
| [ OK ] Listening on Syslog Socket. | |
| [ 5.612005] systemd[1]: Listening on fsck to fsckd communication Socket. | |
| [ OK ] Listening on fsck to fsckd communication Socket. | |
| [ 5.651644] systemd[1]: Listening on initctl Compatibility Named Pipe. | |
| [ OK ] Listening on initctl Compatibility Named Pipe. | |
| [ 5.712655] systemd[1]: Condition check resulted in Journal Audit Socket being skipped. | |
| [ 5.722809] systemd[1]: Listening on Journal Socket (/dev/log). | |
| [ OK ] Listening on Journal Socket (/dev/log). | |
| [ 5.762288] systemd[1]: Listening on Journal Socket. | |
| [ OK ] Listening on Journal Socket. | |
| [ 5.802371] systemd[1]: Listening on udev Control Socket. | |
| [ OK ] Listening on udev Control Socket. | |
| [ 5.841993] systemd[1]: Listening on udev Kernel Socket. | |
| [ OK ] Listening on udev Kernel Socket. | |
| [ 5.881848] systemd[1]: Condition check resulted in Huge Pages File System being skipped. | |
| [ 5.891790] systemd[1]: Condition check resulted in POSIX Message Queue File System being skipped. | |
| [ 5.905772] systemd[1]: Mounting Kernel Debug File System... | |
| Mounting Kernel Debug File System... | |
| [ 5.941782] systemd[1]: Condition check resulted in Kernel Trace File System being skipped. | |
| [ 5.957077] systemd[1]: Starting Create list of static device nodes for the current kernel... | |
| Starting Create list of st…odes for the current kernel... | |
| [ 6.015329] systemd[1]: Starting Load Kernel Module configfs... | |
| Starting Load Kernel Module configfs... | |
| [ 6.065322] systemd[1]: Starting Load Kernel Module drm... | |
| Starting Load Kernel Module drm... | |
| [ 6.115215] systemd[1]: Starting Load Kernel Module fuse... | |
| [ 6.130932] hdmi_hpd_sys_config_release | |
| Starting Load Kernel Module fuse... | |
| [ 6.163953] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped. | |
| [ 6.194816] systemd[1]: Starting File System Check on Root Device... | |
| Starting File System Check on Root Device... | |
| [ 6.224937] fuse: init (API version 7.31) | |
| [ 6.236180] systemd[1]: Starting Journal Service... | |
| Starting Journal Service... | |
| [ 6.274784] systemd[1]: Starting Load Kernel Modules... | |
| Starting Load Kernel Modules... | |
| [ 6.345205] systemd[1]: Starting Coldplug All udev Devices... | |
| Starting Coldplug All udev Devices... | |
| [ 6.444041] systemd[1]: Mounted Kernel Debug File System. | |
| [ OK ] Mounted Kernel Debug File System. | |
| [ 6.480642] systemd[1]: Finished Create list of static device nodes for the current kernel. | |
| [ OK ] Finished Create list of st… nodes for the current kernel. | |
| [ 6.606826] systemd[1]: modprobe@configfs.service: Succeeded. | |
| [ 6.638071] systemd[1]: Finished Load Kernel Module configfs. | |
| [ OK ] Finished Load Kernel Module configfs. | |
| [ 6.683603] systemd[1]: modprobe@drm.service: Succeeded. | |
| [ 6.721253] systemd[1]: Finished Load Kernel Module drm. | |
| [ OK ] Finished Load Kernel Module drm. | |
| [ 6.754001] systemd[1]: modprobe@fuse.service: Succeeded. | |
| [ 6.791538] systemd[1]: Finished Load Kernel Module fuse. | |
| [ OK ] Finished Load Kernel Module fuse. | |
| [ 6.831232] systemd[1]: Finished File System Check on Root Device. | |
| [ OK ] Finished File System Check on Root Device. | |
| [ 6.881639] systemd[1]: Mounting FUSE Control File System... | |
| Mounting FUSE Control File System... | |
| [ 6.935090] systemd[1]: Mounting Kernel Configuration File System... | |
| Mounting Kernel Configuration File System... | |
| [ 7.014763] systemd[1]: Started File System Check Daemon to report status. | |
| [ OK ] Started File System Check Daemon to report status. | |
| [ 7.105038] systemd[1]: Starting Remount Root and Kernel File Systems... | |
| Starting Remount Root and Kernel File Systems... | |
| [ 7.147349] systemd[1]: Started Journal Service. | |
| [ OK ] Started Journal Service. | |
| [ OK ] Mounted FUSE Control File System. | |
| [ OK ] Mounted Kernel Configuration File System. | |
| [ 7.401579] EXT4-fs (mmcblk0p7): re-mounted. Opts: discard | |
| [ OK ] Finished Remount Root and Kernel File Systems. | |
| Starting Flush Journal to Persistent Storage... | |
| Starting Load/Save Random Seed... | |
| Starting Create System Users... | |
| [ 7.831732] systemd-journald[97]: Received client request to flush runtime journal. | |
| [ OK ] Finished Coldplug All udev Devices. | |
| [ 9.266946] ======== XRADIO WIFI OPEN ======== | |
| [ 9.272598] [XRADIO] Driver Label:XR_V02.16.84_P2P_HT40_01.31 | |
| [ 9.279342] [XRADIO] Allocated hw_priv @ (____ptrval____) | |
| [ 9.286304] sunxi-rfkill soc@3000000:rfkill@0: bus_index: 1 | |
| [ 9.302653] sunxi-rfkill soc@3000000:rfkill@0: wlan power on success | |
| [ 9.470758] systemd-journald[97]: File /var/log/journal/d6cf2e6523464ceab62681de06d93957/system.journal corrupted or uncleanly shut down, renaming and replacing. | |
| Starting Helper to synchronize boot up for ifupdown... | |
| [ OK ] Finished Create System Users. | |
| [ 9.560679] sunxi-mmc 4021000.sdmmc: sdc set ios:clk 0Hz bm PP pm UP vdd 21 width 1 timing LEGACY(SDR12) dt B | |
| [ 9.577010] [XRADIO] Detect SDIO card 1 | |
| Starting Create Static Device Nodes in /dev... | |
| [ 9.621048] sunxi-mmc 4021000.sdmmc: no vqmmc,Check if there is regulator | |
| [ 9.660958] sunxi-mmc 4021000.sdmmc: sdc set ios:clk 400000Hz bm PP pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B | |
| [ 9.714231] sunxi-mmc 4021000.sdmmc: sdc set ios:clk 400000Hz bm PP pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B | |
| [ 9.749153] sunxi-mmc 4021000.sdmmc: sdc set ios:clk 400000Hz bm PP pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B | |
| [ 9.792538] sunxi-mmc 4021000.sdmmc: sdc set ios:clk 400000Hz bm PP pm ON vdd 21 width 1 timing SD-HS(SDR25) dt B | |
| [ 9.817270] sunxi-mmc 4021000.sdmmc: sdc set ios:clk 50000000Hz bm PP pm ON vdd 21 width 1 timing SD-HS(SDR25) dt B | |
| [ 9.848103] sunxi-mmc 4021000.sdmmc: sdc set ios:clk 50000000Hz bm PP pm ON vdd 21 width 4 timing SD-HS(SDR25) dt B | |
| [ 9.878363] mmc1: new high speed SDIO card at address 0001 | |
| [ 9.886316] [SBUS] XRadio Device:sdio clk=50000000 | |
| [ 9.895780] [XRADIO] XRADIO_HW_REV 1.0 detected. | |
| [ 10.221498] [XRADIO] xradio_update_dpllctrl: DPLL_CTRL Sync=0x00c00000. | |
| [ 11.225961] [XRADIO] Bootloader complete | |
| [ OK ] Finished Create Static Device Nodes in /dev. | |
| [ OK ] Reached target Local File Systems (Pre). | |
| [ OK ] Reached target Local File Systems. | |
| Starting Tell Plymouth To Write Out Runtime Data... | |
| Starting Rule-based Manage…for Device Events and Files... | |
| [ OK [ 11.977818] [XRADIO] Firmware completed. | |
| ] Finished Tell Plymouth To Write Out Runtime Data. | |
| [ OK ] Finished Flush Journal to Persistent Storage. | |
| [ 12.031352] [WSM] Firmware Label:XR_C09.08.52.64_DBG_02.100 2GHZ HT40 Jan 3 2020 13:14:37 | |
| Starting Create Volatile Files and Directories... | |
| [ 12.076145] [XRADIO] Firmware Startup Done. | |
| [ 12.101285] [XRADIO_WRN] enable Multi-Rx! | |
| [ 12.113280] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht' | |
| [ 12.234283] usbcore: registered new interface driver uvcvideo | |
| [ 12.240693] USB Video Class driver (1.1.1) | |
| [ 12.312867] xt_time: kernel timezone is -0000 | |
| [FAILED] Failed to start Load Kernel Modules. | |
| See 'systemctl status systemd-modules-load.service' for details. | |
| [ OK ] Finished Create Volatile Files and Directories. | |
| Starting Apply Kernel Variables... | |
| Starting Network Time Synchronization... | |
| Starting Update UTMP about System Boot/Shutdown... | |
| [ OK ] Started Rule-based Manager for Device Events and Files. | |
| Starting Show Plymouth Boot Screen... | |
| [ 12.976723] proc: Bad value for 'hidepid' | |
| [ OK ] Finished Apply Kernel Variables. | |
| [ OK ] Started Show Plymouth Boot Screen. | |
| [ OK ] Started Forward Password R…s to Plymouth Directory Watch. | |
| [ OK ] Reached target Local Encrypted Volumes. | |
| [ OK ] Reached target Paths. | |
| [ OK ] Finished Update UTMP about System Boot/Shutdown. | |
| [ OK ] Found device /dev/ttyS0. | |
| [ OK ] Reached target Sound Card. | |
| [ OK ] Reached target Hardware activated USB gadget. | |
| [ OK ] Started Network Time Synchronization. | |
| [ 19.210938] random: crng init done | |
| [ 19.214754] random: 7 urandom warning(s) missed due to ratelimiting | |
| [ OK ] Finished Load/Save Random Seed. | |
| [ OK ] Finished Helper to synchronize boot up for ifupdown. | |
| [ OK ] Reached target System Initialization. | |
| [ OK ] Started Daily Cleanup of Temporary Directories. | |
| [ OK ] Reached target System Time Set. | |
| [ OK ] Reached target System Time Synchronized. | |
| [ OK ] Started Daily apt download activities. | |
| [ OK ] Started Daily apt upgrade and clean activities. | |
| [ OK ] Started Periodic ext4 Onli…ata Check for All Filesystems. | |
| [ OK ] Started Discard unused blocks once a week. | |
| [ OK ] Started Daily rotation of log files. | |
| [ OK ] Started Daily man-db regeneration. | |
| [ OK ] Reached target Timers. | |
| [ OK ] Listening on D-Bus System Message Bus Socket. | |
| [ OK ] Reached target Sockets. | |
| [ OK ] Reached target Basic System. | |
| [ OK ] Listening on Load/Save RF …itch Status /dev/rfkill Watch. | |
| [ OK ] Started Regular background program processing daemon. | |
| [ OK ] Started D-Bus System Message Bus. | |
| Starting Connection service... | |
| Starting DUN service... | |
| Starting Remove Stale Onli…t4 Metadata Check Snapshots... | |
| Starting Raise network interfaces... | |
| Starting Telephony service... | |
| Starting System Logging Service... | |
| Starting User Login Management... | |
| Starting LSB: Start busybox udhcpd at boot time... | |
| Starting Disk Manager... | |
| Starting WPA supplicant... | |
| [ OK ] Started LSB: Start busybox udhcpd at boot time. | |
| [ OK ] Started System Logging Service. | |
| Starting Load/Save RF Kill Switch Status... | |
| [ OK ] Started DUN service. | |
| [ OK ] Started Telephony service. | |
| [ OK ] Started WPA supplicant. | |
| [ 20.553082] sunxi-rfkill soc@3000000:rfkill@0: block state already is 1 | |
| [ OK ] Started Load/Save RF Kill Switch Status. | |
| [ OK ] Started Connection service. | |
| [ 21.269661] proc: Bad value for 'hidepid' | |
| Starting Authorization Manager... | |
| [ 21.512801] libphy: 4500000.eth: probed | |
| [ 21.545995] sunxi-gmac 4500000.eth eth0: eth0: Type(8) PHY ID 001cc916 at 0 IRQ poll (4500000.eth-0:00) | |
| [ OK ] Started Authorization Manager. | |
| Starting Hostname Service... | |
| [ 22.063172] proc: Bad value for 'hidepid' | |
| [ OK ] Started User Login Management. | |
| [ OK ] Started Disk Manager. | |
| [ OK ] Started Hostname Service. | |
| [ OK ] Finished Remove Stale Onli…ext4 Metadata Check Snapshots. | |
| [ 24.721069] sunxi-gmac 4500000.eth eth0: Link is Up - 100Mbps/Full - flow control off | |
| [ 24.729825] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready | |
| [FAILED] Failed to start Raise network interfaces. | |
| See 'systemctl status networking.service' for details. | |
| [ OK ] Reached target Network. | |
| Starting OpenBSD Secure Shell server... | |
| Starting Permit User Sessions... | |
| [ OK ] Finished Permit User Sessions. | |
| Starting Light Display Manager... | |
| Starting Hold until boot process finishes up... | |
| Debian GNU/Linux 11 nezha ttyS0 | |
| nezha login: [ 42.320709] usb1-vbus: disabling | |
| [ 59.553452] [SNDCODEC][sunxi_card_hw_params][620]:stream_flag: 1 | |
| [ 61.333161] WARN:audio is not on | |
| [ 61.336763] HDMI Audio Enable Successfully | |
| nezha login: root | |
| Password: | |
| Linux nezha 5.4.61 #68 PREEMPT Tue Jun 1 04:18:22 UTC 2021 riscv64 | |
| The programs included with the Debian GNU/Linux system are free software; | |
| the exact distribution terms for each program are described in the | |
| individual files in /usr/share/doc/*/copyright. | |
| Debian GNU/Linux comes with ABSOLUTELY NO WARRANTY, to the extent | |
| permitted by applicable law. | |
| Last login: Sun Jun 13 21:19:56 UTC 2021 on ttyS0 | |
| root@nezha:~# uname -a | |
| Linux nezha 5.4.61 #68 PREEMPT Tue Jun 1 04:18:22 UTC 2021 riscv64 GNU/Linux | |
| root@nezha:~# _ |
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment