Last active
November 6, 2023 06:29
-
-
Save sgvj/69aa731919c695dfb78301295540888b to your computer and use it in GitHub Desktop.
My Asakuki Esphome Configuration file
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
| # This fits my needs, some logic could/should be added so let me know if you figure it out | |
| # I deliberarly de-coupled lights and mist | |
| # Most of my useage comes from automations that trigger actions, I have a single mist on/off switch in HomeAssistant UI | |
| substitutions: | |
| devicename: asakuki | |
| esphome: | |
| name: $devicename | |
| platform: ESP8266 | |
| board: esp01_1m | |
| # turn off rainbow mode | |
| on_boot: | |
| then: | |
| - uart.write: [0x55, 0xaa, 0x00, 0x06, 0x00, 0x05, 0x6e, 0x04, 0x00, 0x01, 0x01, 0x7E] | |
| wifi: | |
| networks: | |
| - ssid: "" | |
| password: "" | |
| - ssid: "" | |
| password: "" | |
| # enable tuya sensor platform | |
| tuya: | |
| # sense water alert. 0 = fine. 1 = Out of water | |
| # I don't know when this is supposed to reset tho | |
| sensor: | |
| - platform: "tuya" | |
| name: $devicename out of water | |
| sensor_datapoint: 12 | |
| switch: | |
| # Turn the mist on and off without affecting LED, I may have some values mixed up here | |
| - platform: template | |
| name: $devicename Diffuser | |
| optimistic: true | |
| turn_on_action: | |
| - uart.write: [0x55, 0xAA, 0x00, 0x06, 0x00, 0x05, 0x67, 0x04, 0x00, 0x01, 0x01, 0x77] | |
| turn_off_action: | |
| - uart.write: [0x55, 0xaa, 0x00, 0x06, 0x00, 0x05, 0x67, 0x04, 0x00, 0x01, 0x02, 0x78] | |
| # Turns mist on (if not on before) (would be nice to have some logic to toggle the above) to high setting, off to low | |
| - platform: template | |
| name: $devicename Turbo | |
| id: turbo | |
| optimistic: true | |
| turn_on_action: | |
| - uart.write: [0x55, 0xAA, 0x00, 0x06, 0x00, 0x05, 0x67, 0x04, 0x00, 0x01, 0x01, 0x77] | |
| turn_off_action: | |
| - uart.write: [0x55, 0xAA, 0x00, 0x06, 0x00, 0x05, 0x67, 0x04, 0x00, 0x01, 0x00, 0x76] | |
| # Defaults to a solid color not rainbows | |
| - platform: template | |
| name: $devicename LED | |
| optimistic: true | |
| turn_on_action: | |
| then: | |
| - if: | |
| condition: | |
| switch.is_on: rainbow | |
| # same goes for is_off | |
| then: | |
| - uart.write: [0x55, 0xaa, 0x00, 0x06, 0x00, 0x05, 0x0b, 0x01, 0x00, 0x01, 0x01, 0x18] | |
| else: | |
| - uart.write: [0x55, 0xaa, 0x00, 0x06, 0x00, 0x05, 0x0b, 0x01, 0x00, 0x01, 0x01, 0x18] | |
| - uart.write: [0x55, 0xaa, 0x00, 0x06, 0x00, 0x05, 0x6e, 0x04, 0x00, 0x01, 0x01, 0x7E] | |
| turn_off_action: | |
| - uart.write: [0x55, 0xAA, 0x00, 0x06, 0x00, 0x05, 0x0B, 0x01, 0x00, 0x01, 0x00, 0x17] | |
| # Get hippy with it. Off keeps it stuck on a given color | |
| - platform: template | |
| name: $devicename Rainbow Mode | |
| id: rainbow | |
| optimistic: true | |
| turn_on_action: | |
| - uart.write: [0x55, 0xaa, 0x00, 0x06, 0x00, 0x05, 0x0b, 0x01, 0x00, 0x01, 0x01, 0x18] | |
| turn_off_action: | |
| - uart.write: [0x55, 0xaa, 0x00, 0x06, 0x00, 0x05, 0x6e, 0x04, 0x00, 0x01, 0x01, 0x7E] | |
| # VITAL diffuser may crash if not set | |
| uart: | |
| baud_rate: 9600 | |
| tx_pin: GPIO1 | |
| rx_pin: GPIO3 | |
| # Enable logging | |
| logger: | |
| baud_rate: 0 | |
| # Directly modify the diffuser in automations rather than rely on elegant switches in the UI | |
| api: | |
| services: | |
| - service: all_on #led and diffuser | |
| then: | |
| - uart.write: [0x55, 0xaa, 0x00, 0x06, 0x00, 0x06, 0x01, 0x01, 0x00, 0x01, 0x01, 0x0E] | |
| - service: all_off #led and diffuser | |
| then: | |
| - uart.write: [0x55, 0xaa, 0x00, 0x06, 0x00, 0x05, 0x67, 0x04, 0x00, 0x01, 0x02, 0x78] | |
| - service: wifi_led #not sure if this works | |
| then: | |
| - uart.write: [0x55, 0xaa, 0x00, 0x03, 0x00, 0x01, 0x03, 0x06] | |
| - service: diffuse_fast #led and diffuser | |
| then: | |
| - uart.write: [0x55, 0xAA, 0x00, 0x06, 0x00, 0x05, 0x67, 0x04, 0x00, 0x01, 0x01, 0x77] | |
| - service: diffuse_slow | |
| then: | |
| - uart.write: [0x55, 0xAA, 0x00, 0x06, 0x00, 0x05, 0x67, 0x04, 0x00, 0x01, 0x00, 0x76] | |
| - service: led_on | |
| then: | |
| - uart.write: [0x55, 0xaa, 0x00, 0x06, 0x00, 0x05, 0x0b, 0x01, 0x00, 0x01, 0x01, 0x18] | |
| - service: led_off | |
| then: | |
| - uart.write: [0x55, 0xaa, 0x00, 0x06, 0x00, 0x05, 0x0b, 0x01, 0x00, 0x01, 0x01, 0x18] | |
| - service: led_rainbow | |
| then: | |
| - uart.write: [0x55, 0xaa, 0x00, 0x06, 0x00, 0x05, 0x6e, 0x04, 0x00, 0x01, 0x00, 0x7E] | |
| - service: led_static | |
| then: | |
| - uart.write: [0x55, 0xaa, 0x00, 0x06, 0x00, 0x05, 0x6e, 0x04, 0x00, 0x01, 0x01, 0x7F] | |
| # The color service definitions ensure rainbow mode is off before setting the color | |
| # I looked into the encoding of the colors and it was using some weird encoding of RGB so I gave up, I'm no coder | |
| - service: led_purple | |
| then: | |
| - uart.write: [0x55, 0xaa, 0x00, 0x06, 0x00, 0x05, 0x6e, 0x04, 0x00, 0x01, 0x01, 0x7E] | |
| - delay: 1s | |
| - uart.write: [0x55, 0xaa, 0x00, 0x06, 0x00, 0x12, 0x6c, 0x03, 0x00, 0x0e, 0x64, 0x38, 0x30, 0x30, 0x66, 0x66, 0x30, 0x31, 0x32, 0x32, 0x66, 0x66, 0x66, 0x66, 0xb9] | |
| - service: led_green1 | |
| then: | |
| - uart.write: [0x55, 0xaa, 0x00, 0x06, 0x00, 0x05, 0x6e, 0x04, 0x00, 0x01, 0x01, 0x7E] | |
| - delay: 1s | |
| - uart.write: [0x55, 0xaa, 0x00, 0x06, 0x00, 0x12, 0x6c, 0x03, 0x00, 0x0e, 0x37, 0x38, 0x66, 0x66, 0x30, 0x30, 0x30, 0x30, 0x35, 0x63, 0x66, 0x66, 0x66, 0x66, 0xBF] | |
| - service: led_orange | |
| then: | |
| - uart.write: [0x55, 0xaa, 0x00, 0x06, 0x00, 0x05, 0x6e, 0x04, 0x00, 0x01, 0x01, 0x7E] | |
| - delay: 1s | |
| - uart.write: [0x55, 0xaa, 0x00, 0x06, 0x00, 0x12, 0x6c, 0x03, 0x00, 0x0e, 0x66, 0x66, 0x34, 0x32, 0x30, 0x30, 0x30, 0x30, 0x30, 0x66, 0x66, 0x66, 0x66, 0x66, 0xb4] | |
| - service: led_yellow | |
| then: | |
| - uart.write: [0x55, 0xaa, 0x00, 0x06, 0x00, 0x05, 0x6e, 0x04, 0x00, 0x01, 0x01, 0x7E] | |
| - delay: 1s | |
| - uart.write: [0x55, 0xaa, 0x00, 0x06, 0x00, 0x12, 0x6c, 0x03, 0x00, 0x0e, 0x66, 0x66, 0x63, 0x30, 0x30, 0x30, 0x30, 0x30, 0x32, 0x64, 0x66, 0x66, 0x66, 0x66, 0xe1] | |
| - service: led_green2 | |
| then: | |
| - uart.write: [0x55, 0xaa, 0x00, 0x06, 0x00, 0x05, 0x6e, 0x04, 0x00, 0x01, 0x01, 0x7E] | |
| - delay: 1s | |
| - uart.write: [0x55, 0xaa, 0x00, 0x06, 0x00, 0x12, 0x6c, 0x03, 0x00, 0x0e, 0x30, 0x30, 0x66, 0x66, 0x34, 0x32, 0x30, 0x30, 0x38, 0x37, 0x66, 0x66, 0x66, 0x66, 0x8d] | |
| - service: led_blue | |
| then: | |
| - uart.write: [0x55, 0xaa, 0x00, 0x06, 0x00, 0x05, 0x6e, 0x04, 0x00, 0x01, 0x01, 0x7E] | |
| - delay: 1s | |
| - uart.write: [0x55, 0xaa, 0x00, 0x06, 0x00, 0x12, 0x6c, 0x03, 0x00, 0x0e, 0x30, 0x30, 0x63, 0x33, 0x66, 0x66, 0x30, 0x30, 0x63, 0x33, 0x66, 0x66, 0x66, 0x66, 0xe4] | |
| - service: led_pink | |
| then: | |
| - uart.write: [0x55, 0xaa, 0x00, 0x06, 0x00, 0x05, 0x6e, 0x04, 0x00, 0x01, 0x01, 0x7E] | |
| - delay: 1s | |
| - uart.write: [0x55, 0xaa, 0x00, 0x06, 0x00, 0x12, 0x6c, 0x03, 0x00, 0x0e, 0x66, 0x66, 0x30, 0x30, 0x61, 0x38, 0x30, 0x31, 0x34, 0x31, 0x66, 0x66, 0x66, 0x66, 0xb7] | |
| - service: led_red1 | |
| then: | |
| - uart.write: [0x55, 0xaa, 0x00, 0x06, 0x00, 0x05, 0x6e, 0x04, 0x00, 0x01, 0x01, 0x7E] | |
| - delay: 1s | |
| - uart.write: [0x55, 0xaa, 0x00, 0x06, 0x00, 0x12, 0x6c, 0x03, 0x00, 0x0e, 0x66, 0x66, 0x30, 0x30, 0x32, 0x34, 0x30, 0x31, 0x36, 0x30, 0x66, 0x66, 0x66, 0x66, 0x85] | |
| - service: led_red2 | |
| then: | |
| - uart.write: [0x55, 0xaa, 0x00, 0x06, 0x00, 0x05, 0x6e, 0x04, 0x00, 0x01, 0x01, 0x7E] | |
| - delay: 1s | |
| - uart.write: [0x55, 0xaa, 0x00, 0x06, 0x00, 0x12, 0x6c, 0x03, 0x00, 0x0e, 0x66, 0x66, 0x30, 0x30, 0x30, 0x30, 0x30, 0x30, 0x30, 0x30, 0x66, 0x66, 0x66, 0x66, 0x78] | |
| ota: |
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment