Created
December 23, 2013 07:40
-
-
Save shalk/8093060 to your computer and use it in GitHub Desktop.
packstack answer file . env: vm(vmware workstation) 2 CPU 2g MEM 20g DISK bridge CentoOS6.4 mininal.iso
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
[general] | |
# Path to a Public key to install on servers. If a usable key has not | |
# been installed on the remote servers the user will be prompted for a | |
# password and this key will be installed so the password will not be | |
# required again | |
CONFIG_SSH_KEY= | |
# Set to 'y' if you would like Packstack to install MySQL | |
CONFIG_MYSQL_INSTALL=y | |
# Set to 'y' if you would like Packstack to install OpenStack Image | |
# Service (Glance) | |
CONFIG_GLANCE_INSTALL=y | |
# Set to 'y' if you would like Packstack to install OpenStack Block | |
# Storage (Cinder) | |
CONFIG_CINDER_INSTALL=y | |
# Set to 'y' if you would like Packstack to install OpenStack Compute | |
# (Nova) | |
CONFIG_NOVA_INSTALL=y | |
# Set to 'y' if you would like Packstack to install OpenStack | |
# Networking (Neutron) | |
CONFIG_NEUTRON_INSTALL=y | |
# Set to 'y' if you would like Packstack to install OpenStack | |
# Dashboard (Horizon) | |
CONFIG_HORIZON_INSTALL=y | |
# Set to 'y' if you would like Packstack to install OpenStack Object | |
# Storage (Swift) | |
CONFIG_SWIFT_INSTALL=y | |
# Set to 'y' if you would like Packstack to install OpenStack | |
# Metering (Ceilometer) | |
CONFIG_CEILOMETER_INSTALL=y | |
# Set to 'y' if you would like Packstack to install OpenStack | |
# Orchestration (Heat) | |
CONFIG_HEAT_INSTALL=n | |
# Set to 'y' if you would like Packstack to install the OpenStack | |
# Client packages. An admin "rc" file will also be installed | |
CONFIG_CLIENT_INSTALL=y | |
# Comma separated list of NTP servers. Leave plain if Packstack | |
# should not install ntpd on instances. | |
CONFIG_NTP_SERVERS= | |
# Set to 'y' if you would like Packstack to install Nagios to monitor | |
# OpenStack hosts | |
CONFIG_NAGIOS_INSTALL=y | |
# Comma separated list of servers to be excluded from installation in | |
# case you are running Packstack the second time with the same answer | |
# file and don't want Packstack to touch these servers. Leave plain if | |
# you don't need to exclude any server. | |
EXCLUDE_SERVERS= | |
# The IP address of the server on which to install MySQL | |
CONFIG_MYSQL_HOST=10.0.50.158 | |
# Username for the MySQL admin user | |
CONFIG_MYSQL_USER=root | |
# Password for the MySQL admin user | |
CONFIG_MYSQL_PW=7b8f3e1839a348e7 | |
# The IP address of the server on which to install the QPID service | |
CONFIG_QPID_HOST=10.0.50.158 | |
# Enable SSL for the QPID service | |
CONFIG_QPID_ENABLE_SSL=n | |
# Enable Authentication for the QPID service | |
CONFIG_QPID_ENABLE_AUTH=n | |
# The password for the NSS certificate database of the QPID service | |
CONFIG_QPID_NSS_CERTDB_PW=9dca3ce12bcc40719b4836b410eec4ab | |
# The port in which the QPID service listens to SSL connections | |
CONFIG_QPID_SSL_PORT=5671 | |
# The filename of the certificate that the QPID service is going to | |
# use | |
CONFIG_QPID_SSL_CERT_FILE=/etc/pki/tls/certs/qpid_selfcert.pem | |
# The filename of the private key that the QPID service is going to | |
# use | |
CONFIG_QPID_SSL_KEY_FILE=/etc/pki/tls/private/qpid_selfkey.pem | |
# Auto Generates self signed SSL certificate and key | |
CONFIG_QPID_SSL_SELF_SIGNED=y | |
# User for qpid authentication | |
CONFIG_QPID_AUTH_USER=qpid_user | |
# Password for user authentication | |
CONFIG_QPID_AUTH_PASSWORD=ecbaf354562e4ba5 | |
# The IP address of the server on which to install Keystone | |
CONFIG_KEYSTONE_HOST=10.0.50.158 | |
# The password to use for the Keystone to access DB | |
CONFIG_KEYSTONE_DB_PW=e5749858665d4343 | |
# The token to use for the Keystone service api | |
CONFIG_KEYSTONE_ADMIN_TOKEN=683d6663f20b4a53b39ba41a5dc39ff0 | |
# The password to use for the Keystone admin user | |
CONFIG_KEYSTONE_ADMIN_PW=2cf01a60e82a4b26 | |
# The password to use for the Keystone demo user | |
CONFIG_KEYSTONE_DEMO_PW=8a684b8debe44c4e | |
# Kestone token format. Use either UUID or PKI | |
CONFIG_KEYSTONE_TOKEN_FORMAT=PKI | |
# The IP address of the server on which to install Glance | |
CONFIG_GLANCE_HOST=10.0.50.158 | |
# The password to use for the Glance to access DB | |
CONFIG_GLANCE_DB_PW=3aa780496dc9471a | |
# The password to use for the Glance to authenticate with Keystone | |
CONFIG_GLANCE_KS_PW=bafc31064ac04bc9 | |
# The IP address of the server on which to install Cinder | |
CONFIG_CINDER_HOST=10.0.50.158 | |
# The password to use for the Cinder to access DB | |
CONFIG_CINDER_DB_PW=70c12d753e104f61 | |
# The password to use for the Cinder to authenticate with Keystone | |
CONFIG_CINDER_KS_PW=f73a6f243d554bf6 | |
# The Cinder backend to use, valid options are: lvm, gluster, nfs | |
CONFIG_CINDER_BACKEND=lvm | |
# Create Cinder's volumes group. This should only be done for testing | |
# on a proof-of-concept installation of Cinder. This will create a | |
# file-backed volume group and is not suitable for production usage. | |
CONFIG_CINDER_VOLUMES_CREATE=y | |
# Cinder's volumes group size. Note that actual volume size will be | |
# extended with 3% more space for VG metadata. | |
CONFIG_CINDER_VOLUMES_SIZE=1G | |
# A single or comma separated list of gluster volume shares to mount, | |
# eg: ip-address:/vol-name, domain:/vol-name | |
CONFIG_CINDER_GLUSTER_MOUNTS= | |
# A single or comma seprated list of NFS exports to mount, eg: ip- | |
# address:/export-name | |
CONFIG_CINDER_NFS_MOUNTS= | |
# The IP address of the server on which to install the Nova API | |
# service | |
CONFIG_NOVA_API_HOST=10.0.50.158 | |
# The IP address of the server on which to install the Nova Cert | |
# service | |
CONFIG_NOVA_CERT_HOST=10.0.50.158 | |
# The IP address of the server on which to install the Nova VNC proxy | |
CONFIG_NOVA_VNCPROXY_HOST=10.0.50.158 | |
# A comma separated list of IP addresses on which to install the Nova | |
# Compute services | |
CONFIG_NOVA_COMPUTE_HOSTS=10.0.50.158 | |
# The IP address of the server on which to install the Nova Conductor | |
# service | |
CONFIG_NOVA_CONDUCTOR_HOST=10.0.50.158 | |
# The password to use for the Nova to access DB | |
CONFIG_NOVA_DB_PW=177b20b755f04319 | |
# The password to use for the Nova to authenticate with Keystone | |
CONFIG_NOVA_KS_PW=a8f24b29a621464d | |
# The IP address of the server on which to install the Nova Scheduler | |
# service | |
CONFIG_NOVA_SCHED_HOST=10.0.50.158 | |
# The overcommitment ratio for virtual to physical CPUs. Set to 1.0 | |
# to disable CPU overcommitment | |
CONFIG_NOVA_SCHED_CPU_ALLOC_RATIO=16.0 | |
# The overcommitment ratio for virtual to physical RAM. Set to 1.0 to | |
# disable RAM overcommitment | |
CONFIG_NOVA_SCHED_RAM_ALLOC_RATIO=1.5 | |
# Private interface for Flat DHCP on the Nova compute servers | |
CONFIG_NOVA_COMPUTE_PRIVIF=lo | |
# The list of IP addresses of the server on which to install the Nova | |
# Network service | |
CONFIG_NOVA_NETWORK_HOSTS=10.0.50.158 | |
# Nova network manager | |
CONFIG_NOVA_NETWORK_MANAGER=nova.network.manager.FlatDHCPManager | |
# Public interface on the Nova network server | |
CONFIG_NOVA_NETWORK_PUBIF=eth0 | |
# Private interface for network manager on the Nova network server | |
CONFIG_NOVA_NETWORK_PRIVIF=lo | |
# IP Range for network manager | |
CONFIG_NOVA_NETWORK_FIXEDRANGE=192.168.32.0/22 | |
# IP Range for Floating IP's | |
CONFIG_NOVA_NETWORK_FLOATRANGE=10.3.4.0/22 | |
# Name of the default floating pool to which the specified floating | |
# ranges are added to | |
CONFIG_NOVA_NETWORK_DEFAULTFLOATINGPOOL=nova | |
# Automatically assign a floating IP to new instances | |
CONFIG_NOVA_NETWORK_AUTOASSIGNFLOATINGIP=n | |
# First VLAN for private networks | |
CONFIG_NOVA_NETWORK_VLAN_START=100 | |
# Number of networks to support | |
CONFIG_NOVA_NETWORK_NUMBER=1 | |
# Number of addresses in each private subnet | |
CONFIG_NOVA_NETWORK_SIZE=255 | |
# The IP addresses of the server on which to install the Neutron | |
# server | |
CONFIG_NEUTRON_SERVER_HOST=10.0.50.158 | |
# The password to use for Neutron to authenticate with Keystone | |
CONFIG_NEUTRON_KS_PW=629822517f2e40dc | |
# The password to use for Neutron to access DB | |
CONFIG_NEUTRON_DB_PW=f8ee76eaab3c4c07 | |
# A comma separated list of IP addresses on which to install Neutron | |
# L3 agent | |
CONFIG_NEUTRON_L3_HOSTS=10.0.50.158 | |
# The name of the bridge that the Neutron L3 agent will use for | |
# external traffic, or 'provider' if using provider networks | |
CONFIG_NEUTRON_L3_EXT_BRIDGE=br-ex | |
# A comma separated list of IP addresses on which to install Neutron | |
# DHCP agent | |
CONFIG_NEUTRON_DHCP_HOSTS=10.0.50.158 | |
# A comma separated list of IP addresses on which to install Neutron | |
# LBaaS agent | |
CONFIG_NEUTRON_LBAAS_HOSTS= | |
# The name of the L2 plugin to be used with Neutron | |
CONFIG_NEUTRON_L2_PLUGIN=openvswitch | |
# A comma separated list of IP addresses on which to install Neutron | |
# metadata agent | |
CONFIG_NEUTRON_METADATA_HOSTS=10.0.50.158 | |
# A comma separated list of IP addresses on which to install Neutron | |
# metadata agent | |
CONFIG_NEUTRON_METADATA_PW=6fe74ebb20bf4f25 | |
# The type of network to allocate for tenant networks (eg. vlan, | |
# local, gre) | |
CONFIG_NEUTRON_LB_TENANT_NETWORK_TYPE=local | |
# A comma separated list of VLAN ranges for the Neutron linuxbridge | |
# plugin (eg. physnet1:1:4094,physnet2,physnet3:3000:3999) | |
CONFIG_NEUTRON_LB_VLAN_RANGES= | |
# A comma separated list of interface mappings for the Neutron | |
# linuxbridge plugin (eg. physnet1:br-eth1,physnet2:br-eth2,physnet3 | |
# :br-eth3) | |
CONFIG_NEUTRON_LB_INTERFACE_MAPPINGS= | |
# Type of network to allocate for tenant networks (eg. vlan, local, | |
# gre) | |
CONFIG_NEUTRON_OVS_TENANT_NETWORK_TYPE=local | |
# A comma separated list of VLAN ranges for the Neutron openvswitch | |
# plugin (eg. physnet1:1:4094,physnet2,physnet3:3000:3999) | |
CONFIG_NEUTRON_OVS_VLAN_RANGES= | |
# A comma separated list of bridge mappings for the Neutron | |
# openvswitch plugin (eg. physnet1:br-eth1,physnet2:br-eth2,physnet3 | |
# :br-eth3) | |
CONFIG_NEUTRON_OVS_BRIDGE_MAPPINGS= | |
# A comma separated list of colon-separated OVS bridge:interface | |
# pairs. The interface will be added to the associated bridge. | |
CONFIG_NEUTRON_OVS_BRIDGE_IFACES= | |
# A comma separated list of tunnel ranges for the Neutron openvswitch | |
# plugin | |
CONFIG_NEUTRON_OVS_TUNNEL_RANGES= | |
# Override the IP used for GRE tunnels on this hypervisor to the IP | |
# found on the specified interface (defaults to the HOST IP) | |
CONFIG_NEUTRON_OVS_TUNNEL_IF= | |
# The IP address of the server on which to install the OpenStack | |
# client packages. An admin "rc" file will also be installed | |
CONFIG_OSCLIENT_HOST=10.0.50.158 | |
# The IP address of the server on which to install Horizon | |
CONFIG_HORIZON_HOST=10.0.50.158 | |
# To set up Horizon communication over https set this to "y" | |
CONFIG_HORIZON_SSL=n | |
# PEM encoded certificate to be used for ssl on the https server, | |
# leave blank if one should be generated, this certificate should not | |
# require a passphrase | |
CONFIG_SSL_CERT= | |
# Keyfile corresponding to the certificate if one was entered | |
CONFIG_SSL_KEY= | |
# The IP address on which to install the Swift proxy service | |
# (currently only single proxy is supported) | |
CONFIG_SWIFT_PROXY_HOSTS=10.0.50.158 | |
# The password to use for the Swift to authenticate with Keystone | |
CONFIG_SWIFT_KS_PW=3e85646ae6c147e1 | |
# A comma separated list of IP addresses on which to install the | |
# Swift Storage services, each entry should take the format | |
# <ipaddress>[/dev], for example 127.0.0.1/vdb will install /dev/vdb | |
# on 127.0.0.1 as a swift storage device(packstack does not create the | |
# filesystem, you must do this first), if /dev is omitted Packstack | |
# will create a loopback device for a test setup | |
CONFIG_SWIFT_STORAGE_HOSTS=10.0.50.158 | |
# Number of swift storage zones, this number MUST be no bigger than | |
# the number of storage devices configured | |
CONFIG_SWIFT_STORAGE_ZONES=1 | |
# Number of swift storage replicas, this number MUST be no bigger | |
# than the number of storage zones configured | |
CONFIG_SWIFT_STORAGE_REPLICAS=1 | |
# FileSystem type for storage nodes | |
CONFIG_SWIFT_STORAGE_FSTYPE=ext4 | |
# Shared secret for Swift | |
CONFIG_SWIFT_HASH=a442c1f4364f4653 | |
# Size of the swift loopback file storage device | |
CONFIG_SWIFT_STORAGE_SIZE=2G | |
# Whether to provision for demo usage and testing | |
CONFIG_PROVISION_DEMO=y | |
# The CIDR network address for the floating IP subnet | |
CONFIG_PROVISION_DEMO_FLOATRANGE=172.24.4.224/28 | |
# Whether to configure tempest for testing | |
CONFIG_PROVISION_TEMPEST=n | |
# The uri of the tempest git repository to use | |
CONFIG_PROVISION_TEMPEST_REPO_URI=https://github.com/openstack/tempest.git | |
# The revision of the tempest git repository to use | |
CONFIG_PROVISION_TEMPEST_REPO_REVISION=master | |
# Whether to configure the ovs external bridge in an all-in-one | |
# deployment | |
CONFIG_PROVISION_ALL_IN_ONE_OVS_BRIDGE=y | |
# The IP address of the server on which to install Heat service | |
CONFIG_HEAT_HOST=10.0.50.158 | |
# The password used by Heat user to authenticate against MySQL | |
CONFIG_HEAT_DB_PW=1c2efddcf5dd43cf | |
# The password to use for the Heat to authenticate with Keystone | |
CONFIG_HEAT_KS_PW=f43577554e7a45e9 | |
# Set to 'y' if you would like Packstack to install Heat CloudWatch | |
# API | |
CONFIG_HEAT_CLOUDWATCH_INSTALL=n | |
# Set to 'y' if you would like Packstack to install Heat | |
# CloudFormation API | |
CONFIG_HEAT_CFN_INSTALL=n | |
# The IP address of the server on which to install Heat CloudWatch | |
# API service | |
CONFIG_HEAT_CLOUDWATCH_HOST=10.0.50.158 | |
# The IP address of the server on which to install Heat | |
# CloudFormation API service | |
CONFIG_HEAT_CFN_HOST=10.0.50.158 | |
# The IP address of the server on which to install Ceilometer | |
CONFIG_CEILOMETER_HOST=10.0.50.158 | |
# Secret key for signing metering messages. | |
CONFIG_CEILOMETER_SECRET=f61a76d40fc04385 | |
# The password to use for Ceilometer to authenticate with Keystone | |
CONFIG_CEILOMETER_KS_PW=7a996f14cb9e4389 | |
# The IP address of the server on which to install the Nagios server | |
CONFIG_NAGIOS_HOST=10.0.50.158 | |
# The password of the nagiosadmin user on the Nagios server | |
CONFIG_NAGIOS_PW=e5f9730a92da4491 | |
# To subscribe each server to EPEL enter "y" | |
CONFIG_USE_EPEL=y | |
# A comma separated list of URLs to any additional yum repositories | |
# to install | |
CONFIG_REPO= | |
# To subscribe each server with Red Hat subscription manager, include | |
# this with CONFIG_RH_PW | |
CONFIG_RH_USER= | |
# To subscribe each server with Red Hat subscription manager, include | |
# this with CONFIG_RH_USER | |
CONFIG_RH_PW= | |
# To subscribe each server to Red Hat Enterprise Linux 6 Server Beta | |
# channel (only needed for Preview versions of RHOS) enter "y" | |
CONFIG_RH_BETA_REPO=n | |
# To subscribe each server with RHN Satellite,fill Satellite's URL | |
# here. Note that either satellite's username/password or activation | |
# key has to be provided | |
CONFIG_SATELLITE_URL= | |
# Username to access RHN Satellite | |
CONFIG_SATELLITE_USER= | |
# Password to access RHN Satellite | |
CONFIG_SATELLITE_PW= | |
# Activation key for subscription to RHN Satellite | |
CONFIG_SATELLITE_AKEY= | |
# Specify a path or URL to a SSL CA certificate to use | |
CONFIG_SATELLITE_CACERT= | |
# If required specify the profile name that should be used as an | |
# identifier for the system in RHN Satellite | |
CONFIG_SATELLITE_PROFILE= | |
# Comma separated list of flags passed to rhnreg_ks. Valid flags are: | |
# novirtinfo, norhnsd, nopackages | |
CONFIG_SATELLITE_FLAGS= | |
# Specify a HTTP proxy to use with RHN Satellite | |
CONFIG_SATELLITE_PROXY= | |
# Specify a username to use with an authenticated HTTP proxy | |
CONFIG_SATELLITE_PROXY_USER= | |
# Specify a password to use with an authenticated HTTP proxy. | |
CONFIG_SATELLITE_PROXY_PW= |
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment