shawe

[gcode_macro PA_CAL]
# Klipper pressure advance line calibration macro.
# Usage: PA_CAL BED=100 NOZZLE=240 PA_START=0.0 PA_STOP=0.1 NZL=0.4
# Or you can execute with no parameters, which will use values from printer.cfg and saved_variables.cfg.
# First prints a line with current set PA, then prints 21 additional line segments starting with PA_START, and increasing to PA_STOP.
# Based on http://realdeuce.github.io/Voron/PA/pressure_advance.html
# Cleaned up and moved to using saved_variables.cfg by u/jibbsisme
# Assisted by u/imoftendisgruntled, u/scul86, and thanks to u/beansisfat, u/stray_r

description: Tune Pressure Advance