| #!/bin/sh | |
| # Configuration | |
| lease_file='/tmp/hosts/odhcpd' | |
| forward_zone='ber.section.me.' | |
| reverse_zone_ipv4='1.168.192.in-addr.arpa.' | |
| reverse_zone_ipv6='f.d.0.5.0.7.4.0.1.0.0.2.ip6.arpa.' | |
| # Function for code reusability and readability | |
| expand_ipv6() { |
| # Flake sops-nix | |
| https://github.com/Mic92/sops-nix#usage-example explains how to setup the keys in the `.sops.yaml` file. | |
| If using JSON add the following step below, if YAML, you can already nest things and goto adding the module. | |
| Add | |
| ``` | |
| sops-nix.url = "github:juspay/sops-nix/json-nested"; # https://github.com/Mic92/sops-nix/pull/328 | |
| ``` | |
| To your inputs. |
| { | |
| description = "shift's esphome-devices."; | |
| inputs.flake-utils.url = "github:numtide/flake-utils"; | |
| outputs = { self, nixpkgs, flake-utils }: | |
| flake-utils.lib.eachDefaultSystem | |
| (system: | |
| let pkgs = nixpkgs.legacyPackages.${system}; in | |
| { |
| { | |
| inputs = { | |
| openwrt-imagebuilder.url = "github:astro/nix-openwrt-imagebuilder"; | |
| }; | |
| outputs = { self, nixpkgs, openwrt-imagebuilder }: { | |
| packages.x86_64-linux.ap1 = | |
| let | |
| pkgs = nixpkgs.legacyPackages.x86_64-linux; | |
| profiles = openwrt-imagebuilder.lib.profiles { inherit pkgs; }; |
Download and compile the following https://github.com/pftf/RPi4.git. I made the following change to edk2-platforms to always enable 3GB RAM+ as TFTP booting this seems to cause issues with it remembering the options.
diff --git a/Platform/RaspberryPi/RPi4/RPi4.dsc b/Platform/RaspberryPi/RPi4/RPi4.dsc
index c481c35342..4b495b1fe8 100644
--- a/Platform/RaspberryPi/RPi4/RPi4.dsc
+++ b/Platform/RaspberryPi/RPi4/RPi4.dsc
@@ -495,7 +495,7 @@
| https://ftp.spline.inf.fu-berlin.de/mirrors/archlinux/iso/latest/archlinux-x86_64.iso |
| pi@dio-print:~/klipper $ openocd -f interface/raspberrypi-swd.cfg -f target/rp2040.cfg -c "program out/klipper.elf verify reset exit" | |
| Open On-Chip Debugger 0.11.0-g4f2ae61-dirty (2023-01-07-19:39) | |
| Licensed under GNU GPL v2 | |
| For bug reports, read | |
| http://openocd.org/doc/doxygen/bugs.html | |
| adapter speed: 1000 kHz | |
| Info : Hardware thread awareness created | |
| Info : Hardware thread awareness created | |
| Info : RP2040 Flash Bank Command |
| avrdude -patmega328p -c arduino -b 57600 -P /dev/ttyUSB0 -v -D -Uflash:w:out/klipper.elf.hex:i |
| microsteps: 128 | |
| full_steps_per_rotation: 200 | |
| rotation_distance: 7.68 | |
| run_current: .5 | |
| hold_current: 0.4 |
| # generated by SuperSlicer 2.3.55 on 2020-12-27 at 18:45:50 UTC | |
| [print:0.2mm] | |
| allow_empty_layers = 0 | |
| avoid_crossing_not_first_layer = 1 | |
| avoid_crossing_perimeters = 0 | |
| bottom_fill_pattern = monotonic | |
| bottom_solid_layers = 3 | |
| bottom_solid_min_thickness = 0 | |
| bridge_acceleration = 0 |