-
-
Save shima-529/cb43f907fa4033e69a21c9fa191fa708 to your computer and use it in GitHub Desktop.
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
#include "stm32f0xx.h" | |
#include <usb_struct.h> | |
#include <usb_desc/usb_packet.h> | |
#include <usb_desc/usb_descriptor.h> | |
#include <stdio.h> | |
#include <string.h> | |
//#define iprintf(...) | |
/* CHANGED | |
* - packed | |
*/ | |
/* Pointer Notation | |
* - type = uintptr_t : This is an pointer for PMA. | |
* Local offset of PMA is stored. | |
* - type = void * or others | |
* : This is an pointer for main memory. | |
*/ | |
// External Descriptors | |
extern const USBDeviceDescriptor dev_desc; | |
extern const uint8_t dev_desc2[]; | |
// Struct for USB Peripheral | |
typedef struct { | |
uint16_t addr_tx; | |
uint16_t count_tx; | |
uint16_t addr_rx; | |
uint16_t count_rx; | |
} PacketBuffer; | |
volatile static PacketBuffer *g_packet_buffer; | |
// Some macros | |
#define MIN(x, y) ((x) < (y) ? (x) : (y)) | |
#define USB_PMASIZE 1024 | |
#define USB_EPnR(n) *(volatile uint16_t *)(&USB->EP0R + 2 * (n)) | |
enum USBSetupPacketRequest { | |
GET_STATUS = 0, CLEAR_FEATURE = 1, SET_FEATURE = 3, | |
SET_ADDRESS = 5, GET_DESCRIPTOR = 6, SET_DESCRIPTOR = 7, | |
GET_CONFIGURATION = 8, SET_CONFIGURATION = 9, | |
GET_INTERFACE = 10, SET_INTERFACE = 11, SYNCH_FRAME = 12 | |
}; | |
enum USBDescriptorType { | |
DEVICE = 1, CONFIGURATION = 2, STRING = 3, INTERFACE = 4, | |
ENDPOINT = 5, DEVICE_QUALIFIER = 6, | |
OTHER_SPEED_CONFIGURATION = 7, INTERFACE_POWER = 8 | |
}; | |
// SETUP Packet Buffer in main memory | |
volatile static USBSetupPacket g_last_setup; | |
volatile static const uintptr_t addr = 8; | |
// Vars for PMA buffer | |
typedef struct { | |
uint16_t setup_packet; | |
uint16_t device_desc; | |
} PMAOffsets; | |
typedef struct { | |
volatile PMAOffsets offsets; | |
uint16_t sp; | |
} PMAInfo; | |
volatile static PMAInfo pma_info; | |
// FSM | |
typedef enum { | |
ST_RESET, SETUP, IN, OUT, STATUS_IN, STATUS_OUT, ST_ERROR | |
} EP0_fsm; | |
static volatile EP0_fsm ep0_fsm; | |
// Storage Var for the coming xfer | |
typedef struct { | |
uint16_t ptr; | |
uint16_t len; | |
} NextXferInfo; | |
volatile static NextXferInfo next_xfer; | |
// Here begin Utility Funcs | |
static uint16_t alloc(int size) { | |
const uint16_t ret = pma_info.sp; | |
pma_info.sp += size; | |
return ret; | |
} | |
static void pma_out(void *dest, const uintptr_t src, int size) { | |
const volatile uint16_t *src_p = (void *)(src + USB_PMAADDR); | |
volatile uint16_t *dest_p = dest; | |
if( size & 1 ) size++; | |
const uint16_t wSize = size / 2; | |
for(int i = 0; i < wSize; i++) { | |
dest_p[i] = src_p[i]; | |
} | |
} | |
static void pma_in(const uintptr_t dest, const void *src, int size) { | |
const volatile uint16_t *src_p = src; | |
volatile uint16_t *dest_p = (void *)(dest + USB_PMAADDR); | |
if( size & 1 ) size++; | |
const uint16_t wSize = size / 2; | |
for(int i = 0; i < wSize; i++) { | |
dest_p[i] = src_p[i]; | |
} | |
} | |
void usb_init(void) { | |
RCC->APB1ENR |= RCC_APB1ENR_USBEN; | |
USB->CNTR &= ~USB_CNTR_PDWN; | |
for(volatile int i=0; i<100; i++); // wait for voltage to be stable | |
USB->CNTR &= ~USB_CNTR_FRES; | |
USB->BCDR |= USB_BCDR_DPPU; // pull-up DP so as to notify the connection to the host | |
USB->CNTR = USB_CNTR_RESETM; // enable reset interrupt | |
NVIC_SetPriority(USB_IRQn, 0); // Highest Priority | |
NVIC_EnableIRQ(USB_IRQn); | |
} | |
static void usb_endpoint_set_status(int endp, uint16_t status, uint16_t mask) { | |
const uint16_t reg = USB_EPnR(endp); | |
// iprintf("Set Status! 0x%x\n", (reg & (USB_EPREG_MASK | mask)) ^ status); | |
USB_EPnR(endp) = (reg & (USB_EPREG_MASK | mask)) ^ status; | |
} | |
static void set_descriptor(uint16_t wValue) { | |
const uint8_t desc_type = (wValue >> 8) & 0xFF; | |
const uint16_t wLength = g_last_setup.wLength; | |
volatile PMAOffsets *offsets = &pma_info.offsets; | |
switch( desc_type ) { | |
case DEVICE: // Device Descriptor | |
if( offsets->device_desc == 0 ) { | |
offsets->device_desc = alloc(sizeof(USBDeviceDescriptor)); | |
pma_in(offsets->device_desc, &dev_desc, sizeof(USBDeviceDescriptor)); | |
} | |
next_xfer.ptr = offsets->device_desc; | |
next_xfer.len = MIN(wLength, sizeof(USBDeviceDescriptor)); | |
break; | |
case CONFIGURATION: | |
GPIOB->ODR |= 1 << 1; | |
break; | |
// case STRING: | |
// break; | |
// case INTERFACE: | |
// break; | |
// case ENDPOINT: | |
// break; | |
default: | |
break; | |
} | |
} | |
static void usb_ep0_send(uint16_t addr, uint16_t size) { | |
g_packet_buffer[0].addr_tx = addr; | |
g_packet_buffer[0].count_tx = size; | |
usb_endpoint_set_status(0, USB_EP_TX_VALID, USB_EPTX_STAT); | |
// iprintf("SEND: EP0R: 0x%x\n", USB->EP0R); | |
} | |
static void usb_ep0_receive(uint16_t addr, uint16_t size) { | |
g_packet_buffer[0].addr_rx = addr; | |
if( size > 62 ) { | |
g_packet_buffer[0].count_rx = ((size / 32) - 1) << 10; | |
g_packet_buffer[0].count_rx |= 1 << 15; | |
}else{ | |
g_packet_buffer[0].count_rx = size << 10; | |
} | |
usb_endpoint_set_status(0, USB_EP_RX_VALID, USB_EPRX_STAT); | |
// iprintf("RECV: EP0R: 0x%x\n", USB->EP0R); | |
} | |
static void usb_ep0_handle_setup(void) { | |
const volatile USBSetupPacket *p = &g_last_setup; | |
if( p->bmRequestType & 0x80 ) { | |
if( p->bRequest == GET_DESCRIPTOR ) { | |
set_descriptor(p->wValue); | |
usb_ep0_send(next_xfer.ptr, next_xfer.len); | |
} | |
} | |
} | |
static void usb_ep0_prepare_for_status(void) { | |
if( ep0_fsm == STATUS_OUT ) { | |
iprintf("Ready for STATUS_OUT...\n"); | |
usb_ep0_receive(0, 0); | |
} | |
if( ep0_fsm == STATUS_IN ) { | |
// iprintf("Ready for STATUS_IN...\n"); | |
usb_ep0_send(0, 0); | |
} | |
} | |
static void usb_ep0_handle_status(void) { | |
if( g_last_setup.bRequest == SET_ADDRESS ) { | |
USB->DADDR = USB_DADDR_EF | (g_last_setup.wValue & 0x7F); | |
} | |
// prepare for the next SETUP transaction | |
iprintf("Ready for SETUP...\n"); | |
iprintf("Setup Packet Addr: 0x%x\n", pma_info.offsets.setup_packet); | |
usb_ep0_receive(pma_info.offsets.setup_packet, | |
sizeof(USBSetupPacket) | |
); | |
} | |
// Inputs: current state, g_current_setup_packet | |
// Outputs: next state | |
static EP0_fsm next_state_ep0(void) { | |
const volatile USBSetupPacket *p = &g_last_setup; | |
switch(ep0_fsm) { | |
case SETUP: | |
if( p->bmRequestType & 0x80 ) { | |
return (p->wLength != 0) ? IN : STATUS_IN; | |
}else{ | |
return (p->wLength != 0) ? OUT : STATUS_IN; | |
} | |
break; | |
case IN: | |
return STATUS_OUT; | |
break; | |
case OUT: | |
return STATUS_IN; | |
break; | |
case STATUS_IN: | |
break; | |
case STATUS_OUT: | |
break; | |
default: | |
break; | |
} | |
return ST_ERROR; | |
} | |
void USB_IRQHandler(void) { | |
uint16_t flag = USB->ISTR; | |
if( flag & USB_ISTR_RESET ) { | |
iprintf("\nRESET\n"); | |
USB->ISTR &= ~USB_ISTR_RESET; | |
USB->CNTR |= USB_CNTR_CTRM | USB_CNTR_RESETM; | |
memset((void *)&pma_info, 0, sizeof(PMAInfo)); | |
ep0_fsm = ST_RESET; | |
USB->BTABLE = alloc(sizeof(PacketBuffer) * 1); | |
g_packet_buffer = (PacketBuffer *)((uintptr_t)USB->BTABLE + USB_PMAADDR); | |
USB->DADDR = USB_DADDR_EF; // enable the functionality | |
// initialize EP | |
USB->EP0R = USB_EP_CONTROL; | |
pma_info.offsets.setup_packet = alloc(sizeof(USBSetupPacket)); | |
usb_ep0_receive( | |
pma_info.offsets.setup_packet, | |
sizeof(USBSetupPacket) | |
); | |
GPIOB->ODR &= ~(1 << 1); | |
} | |
while( (flag = USB->ISTR) & USB_ISTR_CTR ) { | |
const uint16_t ep_num = flag & USB_ISTR_EP_ID; | |
const uint16_t epreg = USB_EPnR(ep_num); | |
if( ep_num == 0 ) { | |
if( epreg & USB_EP_CTR_RX ) { | |
// DIR == 1 : IRQ by SETUP transaction. CTR_RX is set. | |
USB_EPnR(0) = epreg & ~USB_EP_CTR_RX & USB_EPREG_MASK; | |
if( epreg & USB_EP_SETUP ) { | |
ep0_fsm = SETUP; | |
pma_out( | |
(void *)&g_last_setup, | |
pma_info.offsets.setup_packet, | |
sizeof(USBSetupPacket) | |
); | |
iprintf("** SETUP\n"); | |
iprintf("bmResuestType: %d\n", g_last_setup.bmRequestType); | |
iprintf("bRequest: %d\n", g_last_setup.bRequest); | |
iprintf("wLength: 0x%x\n", g_last_setup.wLength); | |
iprintf("wValue: 0x%x\n", g_last_setup.wValue); | |
usb_ep0_handle_setup(); | |
ep0_fsm = next_state_ep0(); | |
usb_ep0_prepare_for_status(); | |
} | |
else{ | |
// IRQ by OUT transaction | |
if( ep0_fsm == STATUS_OUT ) { | |
iprintf("** STATUS OUT\n"); | |
usb_ep0_handle_status(); | |
}else if( ep0_fsm == OUT ) { | |
iprintf("** OUT\n"); | |
ep0_fsm = next_state_ep0(); | |
usb_ep0_prepare_for_status(); | |
} | |
} | |
} | |
if( epreg & USB_EP_CTR_TX ){ | |
// DIR = 0 : IRQ by IN transaction. CTR_TX is set. | |
USB_EPnR(0) = epreg & ~USB_EP_CTR_TX & USB_EPREG_MASK; | |
if( ep0_fsm == STATUS_IN ) { | |
iprintf("** STATUS IN\n"); | |
usb_ep0_handle_status(); | |
}else if( ep0_fsm == IN ) { | |
iprintf("** IN\n"); | |
ep0_fsm = next_state_ep0(); | |
usb_ep0_prepare_for_status(); | |
} | |
} | |
}else{ | |
iprintf("Else\n"); | |
} | |
} | |
} |
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment