Last active
August 29, 2015 14:00
-
-
Save shipilev/11340572 to your computer and use it in GitHub Desktop.
P-D 920 internals
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
| $ lspci | |
| 00:00.0 Host bridge: Intel Corporation 82945G/GZ/P/PL Memory Controller Hub (rev 81) | |
| 00:01.0 PCI bridge: Intel Corporation 82945G/GZ/P/PL PCI Express Root Port (rev 81) | |
| 00:1b.0 Audio device: Intel Corporation NM10/ICH7 Family High Definition Audio Controller (rev 01) | |
| 00:1c.0 PCI bridge: Intel Corporation NM10/ICH7 Family PCI Express Port 1 (rev 01) | |
| 00:1c.2 PCI bridge: Intel Corporation NM10/ICH7 Family PCI Express Port 3 (rev 01) | |
| 00:1d.0 USB controller: Intel Corporation NM10/ICH7 Family USB UHCI Controller #1 (rev 01) | |
| 00:1d.1 USB controller: Intel Corporation NM10/ICH7 Family USB UHCI Controller #2 (rev 01) | |
| 00:1d.2 USB controller: Intel Corporation NM10/ICH7 Family USB UHCI Controller #3 (rev 01) | |
| 00:1d.3 USB controller: Intel Corporation NM10/ICH7 Family USB UHCI Controller #4 (rev 01) | |
| 00:1d.7 USB controller: Intel Corporation NM10/ICH7 Family USB2 EHCI Controller (rev 01) | |
| 00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev e1) | |
| 00:1f.0 ISA bridge: Intel Corporation 82801GB/GR (ICH7 Family) LPC Interface Bridge (rev 01) | |
| 00:1f.1 IDE interface: Intel Corporation 82801G (ICH7 Family) IDE Controller (rev 01) | |
| 00:1f.2 IDE interface: Intel Corporation NM10/ICH7 Family SATA Controller [IDE mode] (rev 01) | |
| 00:1f.3 SMBus: Intel Corporation NM10/ICH7 Family SMBus Controller (rev 01) | |
| 01:00.0 VGA compatible controller: NVIDIA Corporation GT218 [GeForce 210] (rev a2) | |
| 01:00.1 Audio device: NVIDIA Corporation High Definition Audio Controller (rev a1) | |
| 03:00.0 Ethernet controller: Intel Corporation 82573V Gigabit Ethernet Controller (Copper) (rev 03) | |
| $ smartctl -a /dev/sda | |
| smartctl 6.2 2013-07-26 r3841 [i686-linux-3.13.0-24-generic] (local build) | |
| Copyright (C) 2002-13, Bruce Allen, Christian Franke, www.smartmontools.org | |
| === START OF INFORMATION SECTION === | |
| Model Family: Seagate Barracuda 7200.10 | |
| Device Model: ST3160215A | |
| Serial Number: 9RAC0JXA | |
| Firmware Version: 3.AAD | |
| User Capacity: 160 041 885 696 bytes [160 GB] | |
| Sector Size: 512 bytes logical/physical | |
| Device is: In smartctl database [for details use: -P show] | |
| ATA Version is: ATA/ATAPI-7 (minor revision not indicated) | |
| Local Time is: Sun Apr 27 12:32:44 2014 MSK | |
| SMART support is: Available - device has SMART capability. | |
| SMART support is: Enabled | |
| === START OF READ SMART DATA SECTION === | |
| SMART overall-health self-assessment test result: PASSED | |
| General SMART Values: | |
| Offline data collection status: (0x82) Offline data collection activity | |
| was completed without error. | |
| Auto Offline Data Collection: Enabled. | |
| Self-test execution status: ( 0) The previous self-test routine completed | |
| without error or no self-test has ever | |
| been run. | |
| Total time to complete Offline | |
| data collection: ( 430) seconds. | |
| Offline data collection | |
| capabilities: (0x5b) SMART execute Offline immediate. | |
| Auto Offline data collection on/off support. | |
| Suspend Offline collection upon new | |
| command. | |
| Offline surface scan supported. | |
| Self-test supported. | |
| No Conveyance Self-test supported. | |
| Selective Self-test supported. | |
| SMART capabilities: (0x0003) Saves SMART data before entering | |
| power-saving mode. | |
| Supports SMART auto save timer. | |
| Error logging capability: (0x01) Error logging supported. | |
| General Purpose Logging supported. | |
| Short self-test routine | |
| recommended polling time: ( 1) minutes. | |
| Extended self-test routine | |
| recommended polling time: ( 54) minutes. | |
| SMART Attributes Data Structure revision number: 10 | |
| Vendor Specific SMART Attributes with Thresholds: | |
| ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE | |
| 1 Raw_Read_Error_Rate 0x000f 115 099 006 Pre-fail Always - 99310726 | |
| 3 Spin_Up_Time 0x0003 098 097 000 Pre-fail Always - 0 | |
| 4 Start_Stop_Count 0x0032 099 099 020 Old_age Always - 1561 | |
| 5 Reallocated_Sector_Ct 0x0033 100 100 036 Pre-fail Always - 0 | |
| 7 Seek_Error_Rate 0x000f 080 060 030 Pre-fail Always - 106658147 | |
| 9 Power_On_Hours 0x0032 094 094 000 Old_age Always - 5642 | |
| 10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail Always - 0 | |
| 12 Power_Cycle_Count 0x0032 099 099 020 Old_age Always - 1562 | |
| 187 Reported_Uncorrect 0x0032 100 100 000 Old_age Always - 0 | |
| 189 High_Fly_Writes 0x003a 100 100 000 Old_age Always - 0 | |
| 190 Airflow_Temperature_Cel 0x0022 069 057 045 Old_age Always - 31 (Min/Max 29/31) | |
| 194 Temperature_Celsius 0x0022 031 043 000 Old_age Always - 31 (0 14 0 0 0) | |
| 195 Hardware_ECC_Recovered 0x001a 093 069 000 Old_age Always - 31504687 | |
| 197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 0 | |
| 198 Offline_Uncorrectable 0x0010 100 100 000 Old_age Offline - 0 | |
| 199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 0 | |
| 200 Multi_Zone_Error_Rate 0x0000 100 253 000 Old_age Offline - 0 | |
| 202 Data_Address_Mark_Errs 0x0032 100 253 000 Old_age Always - 0 | |
| SMART Error Log Version: 1 | |
| No Errors Logged | |
| SMART Self-test log structure revision number 1 | |
| Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error | |
| # 1 Short offline Completed without error 00% 5639 - | |
| SMART Selective self-test log data structure revision number 1 | |
| SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS | |
| 1 0 0 Not_testing | |
| 2 0 0 Not_testing | |
| 3 0 0 Not_testing | |
| 4 0 0 Not_testing | |
| 5 0 0 Not_testing | |
| Selective self-test flags (0x0): | |
| After scanning selected spans, do NOT read-scan remainder of disk. | |
| If Selective self-test is pending on power-up, resume after 0 minute delay. | |
| $ cat /proc/cpuinfo | |
| ... | |
| processor : 1 | |
| vendor_id : GenuineIntel | |
| cpu family : 15 | |
| model : 4 | |
| model name : Intel(R) Pentium(R) D CPU 2.80GHz | |
| stepping : 4 | |
| microcode : 0x6 | |
| cpu MHz : 1400.000 | |
| cache size : 1024 KB | |
| physical id : 0 | |
| siblings : 2 | |
| core id : 1 | |
| cpu cores : 2 | |
| apicid : 1 | |
| initial apicid : 1 | |
| fdiv_bug : no | |
| f00f_bug : no | |
| coma_bug : no | |
| fpu : yes | |
| fpu_exception : yes | |
| cpuid level : 5 | |
| wp : yes | |
| flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe nx lm constant_tsc pebs bts pni dtes64 monitor ds_cpl cid cx16 xtpr | |
| bogomips : 5627.70 | |
| clflush size : 64 | |
| cache_alignment : 128 | |
| address sizes : 36 bits physical, 48 bits virtual | |
| power management: | |
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment