Created
June 10, 2012 08:17
-
-
Save shirro/2904463 to your computer and use it in GitHub Desktop.
extract of raspberry pi boot with http://greg.kinoho.net/kernel-20120610.img.xz
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
Waiting for root device /dev/mmcblk0p2... | |
eMMC: configure to 1 bit bus | |
eMMC status: 0x1fff0000, control: 0x00000f00 0x00000000 0x00000000 | |
eMMC status: 0x1fff0000, control: 0x00000f00 0x00000000 0x00000000 | |
desired SD clock: 400000, actual: 400000 (divisor 124) | |
eMMC status: 0x1fff0000, control: 0x00000f00 0x00007c07 0x00000000 | |
eMMC: configure to 1 bit bus | |
eMMC status: 0x01ff0000, control: 0x00000f00 0x00007c07 0x00000000 | |
eMMC: configure to 1 bit bus | |
eMMC status: 0x01ff0000, control: 0x00000f00 0x00007c07 0x00000000 | |
eMMC: configure to 1 bit bus | |
eMMC status: 0x01ff0000, control: 0x00000f00 0x00007c07 0x00000000 | |
eMMC: configure to 1 bit bus | |
eMMC status: 0x01ff0000, control: 0x00000f00 0x00007c07 0x00000000 | |
eMMC: configure to 1 bit bus | |
eMMC status: 0x01ff0000, control: 0x00000f00 0x00007c07 0x00000000 | |
eMMC: configure to 1 bit bus | |
eMMC status: 0x01ff0000, control: 0x00000f00 0x00007c07 0x00000000 | |
eMMC: configure to 1 bit bus | |
eMMC status: 0x01ff0000, control: 0x00000f00 0x00007c07 0x00000000 | |
mmc0: problem reading SD Status register. | |
eMMC: configure to 1 bit bus | |
eMMC status: 0x01ff0000, control: 0x00000f00 0x000e7c07 0x00000000 | |
eMMC status: 0x01ff0000, control: 0x00000f04 0x000e0000 0x00000000 | |
desired SD clock: 50000000, actual: 50000000 (divisor 0) | |
eMMC status: 0x01ff0000, control: 0x00000f04 0x000e0007 0x00000000 | |
eMMC: configure to 1 bit bus | |
eMMC status: 0x01ff0000, control: 0x00000f04 0x000e0007 0x00000000 | |
mmc0: error -110 whilst initialising SD card | |
eMMC: configure to 1 bit bus | |
eMMC status: 0x01ff0000, control: 0x00000000 0x00000000 0x00000000 | |
eMMC status: 0x01ff0000, control: 0x00000000 0x00000000 0x00000000 | |
eMMC: configure to 1 bit bus | |
eMMC status: 0x01ff0000, control: 0x00000f00 0x00000000 0x00000000 | |
eMMC status: 0x01ff0000, control: 0x00000f00 0x00000000 0x00000000 | |
desired SD clock: 300000, actual: 299401 (divisor 166) | |
eMMC status: 0x01ff0000, control: 0x00000f00 0x0000a607 0x00000000 | |
eMMC: configure to 1 bit bus | |
eMMC status: 0x01ff0000, control: 0x00000f00 0x0000a607 0x00000000 | |
eMMC: configure to 1 bit bus | |
eMMC status: 0x01ff0000, control: 0x00000f00 0x0000a607 0x00000000 | |
eMMC: configure to 1 bit bus | |
eMMC status: 0x01ff0000, control: 0x00000f00 0x0000a607 0x00000000 | |
eMMC: configure to 1 bit bus | |
eMMC status: 0x01ff0000, control: 0x00000f00 0x0000a607 0x00000000 | |
eMMC: configure to 1 bit bus | |
eMMC status: 0x01ff0000, control: 0x00000f00 0x0000a607 0x00000000 | |
eMMC: configure to 1 bit bus | |
eMMC status: 0x01ff0000, control: 0x00000f00 0x0000a607 0x00000000 | |
eMMC: configure to 1 bit bus | |
eMMC status: 0x01ff0000, control: 0x00000f00 0x0000a607 0x00000000 | |
eMMC: configure to 1 bit bus | |
eMMC status: 0x01ff0000, control: 0x00000f00 0x000ea607 0x00000000 | |
eMMC status: 0x01ff0000, control: 0x00000f04 0x000e0000 0x00000000 | |
desired SD clock: 50000000, actual: 50000000 (divisor 0) | |
eMMC status: 0x01ff0000, control: 0x00000f04 0x000e0007 0x00000000 | |
eMMC: configure to 1 bit bus | |
eMMC status: 0x01ff0000, control: 0x00000f04 0x000e0007 0x00000000 | |
mmc0: error -110 whilst initialising SD card | |
eMMC: configure to 1 bit bus | |
eMMC status: 0x01ff0000, control: 0x00000000 0x00000000 0x00000000 | |
eMMC status: 0x01ff0000, control: 0x00000000 0x00000000 0x00000000 | |
eMMC: configure to 1 bit bus | |
eMMC status: 0x01ff0000, control: 0x00000f00 0x00000000 0x00000000 | |
eMMC status: 0x01ff0000, control: 0x00000f00 0x00000000 0x00000000 | |
desired SD clock: 200000, actual: 200000 (divisor 249) | |
eMMC status: 0x01ff0000, control: 0x00000f00 0x0000f907 0x00000000 | |
eMMC: configure to 1 bit bus | |
eMMC status: 0x01ff0000, control: 0x00000f00 0x0000f907 0x00000000 | |
eMMC: configure to 1 bit bus | |
eMMC status: 0x01ff0000, control: 0x00000f00 0x0000f907 0x00000000 | |
eMMC: configure to 1 bit bus | |
eMMC status: 0x01ff0000, control: 0x00000f00 0x0000f907 0x00000000 | |
eMMC: configure to 1 bit bus | |
eMMC status: 0x01ff0000, control: 0x00000f00 0x0000f907 0x00000000 | |
eMMC: configure to 1 bit bus | |
eMMC status: 0x01ff0000, control: 0x00000f00 0x0000f907 0x00000000 | |
eMMC: configure to 1 bit bus | |
eMMC status: 0x01ff0000, control: 0x00000f00 0x0000f907 0x00000000 | |
eMMC: configure to 1 bit bus | |
eMMC status: 0x01ff0000, control: 0x00000f00 0x0000f907 0x00000000 | |
mmc0: problem reading SD Status register. | |
mmc0: error -84 whilst initialising SD card | |
eMMC: configure to 1 bit bus | |
eMMC status: 0x01ff0000, control: 0x00000000 0x00000000 0x00000000 | |
eMMC status: 0x01ff0000, control: 0x00000000 0x00000000 0x00000000 | |
eMMC: configure to 1 bit bus | |
eMMC status: 0x01ff0000, control: 0x00000f00 0x00000000 0x00000000 | |
eMMC status: 0x01ff0000, control: 0x00000f00 0x00000000 0x00000000 | |
desired SD clock: 100000, actual: 100000 (divisor 499) | |
eMMC status: 0x01ff0000, control: 0x00000f00 0x0000f347 0x00000000 | |
eMMC: configure to 1 bit bus | |
eMMC status: 0x01ff0000, control: 0x00000f00 0x0000f347 0x00000000 | |
eMMC: configure to 1 bit bus | |
eMMC status: 0x01ff0000, control: 0x00000f00 0x0000f347 0x00000000 | |
eMMC: configure to 1 bit bus | |
eMMC status: 0x01ff0000, control: 0x00000f00 0x0000f347 0x00000000 | |
usb 1-1: new high speed USB device number 2 using dwc_otg | |
eMMC: configure to 1 bit bus | |
eMMC status: 0x01ff0000, control: 0x00000f00 0x0000f347 0x00000000 | |
eMMC: configure to 1 bit bus | |
eMMC status: 0x01ff0000, control: 0x00000f00 0x0000f347 0x00000000 | |
eMMC: configure to 1 bit bus | |
eMMC status: 0x01ff0000, control: 0x00000f00 0x0000f347 0x00000000 | |
eMMC: configure to 1 bit bus | |
eMMC status: 0x01ff0000, control: 0x00000f00 0x0000f347 0x00000000 | |
usb 1-1: New USB device found, idVendor=0424, idProduct=9512 | |
usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 | |
hub 1-1:1.0: USB hub found | |
hub 1-1:1.0: 3 ports detected | |
usb 1-1.1: new high speed USB device number 3 using dwc_otg | |
usb 1-1.1: New USB device found, idVendor=0424, idProduct=ec00 | |
usb 1-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 | |
smsc95xx v1.0.4 | |
smsc95xx 1-1.1:1.0: eth0: register 'smsc95xx' at usb-bcm2708_usb-1.1, smsc95xx USB 2.0 Ethernet, b8:27:eb:bd:10:0b | |
mmc0: Controller never released inhibit bit(s). | |
mmc0: problem reading SD Status register. | |
eMMC status: 0x01ff0000, control: 0x00000f00 0x000e0000 0x00000000 | |
desired SD clock: 25000000, actual: 25000000 (divisor 1) | |
eMMC status: 0x01ff0000, control: 0x00000f00 0x000e0107 0x00000000 | |
eMMC: configure to 1 bit bus | |
eMMC status: 0x01ff0000, control: 0x00000f00 0x000e0107 0x00000000 | |
usb 1-1.2: new full speed USB device number 4 using dwc_otg | |
mmc0: new SDHC card at address b368 | |
mmcblk0: mmc0:b368 LEXAR 7.45 GiB | |
usb 1-1.2: New USB device found, idVendor=046d, idProduct=c52b | |
usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 | |
usb 1-1.2: Product: USB Receiver | |
usb 1-1.2: Manufacturer: Logitech | |
input: Logitech USB Receiver as /devices/platform/bcm2708_usb/usb1/1-1/1-1.2/1-1.2:1.0/input/input0 | |
generic-usb 0003:046D:C52B.0001: input: USB HID v1.11 Keyboard [Logitech USB Receiver] on usb-bcm2708_usb-1.2/input0 | |
input: Logitech USB Receiver as /devices/platform/bcm2708_usb/usb1/1-1/1-1.2/1-1.2:1.1/input/input1 | |
generic-usb 0003:046D:C52B.0002: input,hiddev0: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-bcm2708_usb-1.2/input1 | |
generic-usb 0003:046D:C52B.0003: hiddev0: USB HID v1.11 Device [Logitech USB Receiver] on usb-bcm2708_usb-1.2/input2 | |
mmcblk0: error -110 transferring data, sector 0, nr 8, cmd response 0x920, card status 0xb00 | |
mmcblk0: retrying using single block read | |
mmcblk0: p1 p2 |
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment