Created
June 10, 2012 13:04
-
-
Save shirro/2905469 to your computer and use it in GitHub Desktop.
init_emmc_clock=50000000
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
| eMMC: configure to 1 bit bus | |
| eMMC status: 0x1fff0000, control: 0x00000000 0x00000000 0x00000000 | |
| eMMC status: 0x1fff0000, control: 0x00000000 0x00000000 0x00000000 | |
| mmc0: SDHCI controller on BCM2708_Arasan [platform] using platform's DMA | |
| mmc0: BCM2708 SDHC host at 0x20300000 DMA 2 IRQ 77 | |
| eMMC status: 0x1fff0000, control: 0x00000000 0x00000000 0x00000000 | |
| sdhci-pltfm: SDHCI platform and OF driver helper | |
| Registered led device: led0 | |
| usbcore: registered new interface driver usbhid | |
| usbhid: USB HID core driver | |
| TCP cubic registered | |
| Initializing XFRM netlink socket | |
| NET: Registered protocol family 17 | |
| Registering the dns_resolver key type | |
| VFP support v0.3: implementor 41 architecture 1 part 20 variant b rev 5 | |
| Waiting for root device /dev/mmcblk0p2... | |
| eMMC: configure to 1 bit bus | |
| eMMC status: 0x1fff0000, control: 0x00000f00 0x00000000 0x00000000 | |
| eMMC status: 0x1fff0000, control: 0x00000f00 0x00000000 0x00000000 | |
| desired SD clock: 400000, actual: 400000 (divisor 124) | |
| eMMC status: 0x1fff0000, control: 0x00000f00 0x00007c07 0x00000000 | |
| eMMC: configure to 1 bit bus | |
| eMMC status: 0x1fff0000, control: 0x00000f00 0x00007c07 0x00000000 | |
| eMMC: configure to 1 bit bus | |
| eMMC status: 0x01ff0000, control: 0x00000f00 0x00007c07 0x00000000 | |
| eMMC: configure to 1 bit bus | |
| eMMC status: 0x01ff0000, control: 0x00000f00 0x00007c07 0x00000000 | |
| eMMC: configure to 1 bit bus | |
| eMMC status: 0x01ff0000, control: 0x00000f00 0x00007c07 0x00000000 | |
| eMMC: configure to 1 bit bus | |
| eMMC status: 0x01ff0000, control: 0x00000f00 0x00007c07 0x00000000 | |
| eMMC: configure to 1 bit bus | |
| eMMC status: 0x01ff0000, control: 0x00000f00 0x00007c07 0x00000000 | |
| eMMC: configure to 1 bit bus | |
| eMMC status: 0x01ff0000, control: 0x00000f00 0x00007c07 0x00000000 | |
| mmc0: problem reading SD Status register. | |
| mmc0: error -84 whilst initialising SD card | |
| eMMC: configure to 1 bit bus | |
| eMMC status: 0x01ff0000, control: 0x00000000 0x00000000 0x00000000 | |
| eMMC status: 0x01ff0000, control: 0x00000000 0x00000000 0x00000000 | |
| eMMC: configure to 1 bit bus | |
| eMMC status: 0x01ff0000, control: 0x00000f00 0x00000000 0x00000000 | |
| eMMC status: 0x01ff0000, control: 0x00000f00 0x00000000 0x00000000 | |
| desired SD clock: 300000, actual: 299401 (divisor 166) | |
| eMMC status: 0x01ff0000, control: 0x00000f00 0x0000a607 0x00000000 | |
| eMMC: configure to 1 bit bus | |
| eMMC status: 0x01ff0000, control: 0x00000f00 0x0000a607 0x00000000 | |
| eMMC: configure to 1 bit bus | |
| eMMC status: 0x01ff0000, control: 0x00000f00 0x0000a607 0x00000000 | |
| eMMC: configure to 1 bit bus | |
| eMMC status: 0x01ff0000, control: 0x00000f00 0x0000a607 0x00000000 | |
| eMMC: configure to 1 bit bus | |
| eMMC status: 0x01ff0000, control: 0x00000f00 0x0000a607 0x00000000 | |
| eMMC: configure to 1 bit bus | |
| eMMC status: 0x01ff0000, control: 0x00000f00 0x0000a607 0x00000000 | |
| eMMC: configure to 1 bit bus | |
| eMMC status: 0x01ff0000, control: 0x00000f00 0x0000a607 0x00000000 | |
| eMMC: configure to 1 bit bus | |
| eMMC status: 0x01ff0000, control: 0x00000f00 0x0000a607 0x00000000 | |
| mmc0: problem reading SD Status register. | |
| mmc0: error -110 whilst initialising SD card | |
| eMMC: configure to 1 bit bus | |
| eMMC status: 0x01ff0000, control: 0x00000000 0x00000000 0x00000000 | |
| eMMC status: 0x01ff0000, control: 0x00000000 0x00000000 0x00000000 | |
| eMMC: configure to 1 bit bus | |
| eMMC status: 0x01ff0000, control: 0x00000f00 0x00000000 0x00000000 | |
| eMMC status: 0x01ff0000, control: 0x00000f00 0x00000000 0x00000000 | |
| desired SD clock: 200000, actual: 200000 (divisor 249) | |
| eMMC status: 0x01ff0000, control: 0x00000f00 0x0000f907 0x00000000 | |
| eMMC: configure to 1 bit bus | |
| eMMC status: 0x01ff0000, control: 0x00000f00 0x0000f907 0x00000000 | |
| eMMC: configure to 1 bit bus | |
| eMMC status: 0x01ff0000, control: 0x00000f00 0x0000f907 0x00000000 | |
| eMMC: configure to 1 bit bus | |
| eMMC status: 0x01ff0000, control: 0x00000f00 0x0000f907 0x00000000 | |
| eMMC: configure to 1 bit bus | |
| eMMC status: 0x01ff0000, control: 0x00000f00 0x0000f907 0x00000000 | |
| eMMC: configure to 1 bit bus | |
| eMMC status: 0x01ff0000, control: 0x00000f00 0x0000f907 0x00000000 | |
| eMMC: configure to 1 bit bus | |
| eMMC status: 0x01ff0000, control: 0x00000f00 0x0000f907 0x00000000 | |
| eMMC: configure to 1 bit bus | |
| eMMC status: 0x01ff0000, control: 0x00000f00 0x0000f907 0x00000000 | |
| mmc0: problem reading SD Status register. | |
| mmc0: error -110 whilst initialising SD card | |
| eMMC: configure to 1 bit bus | |
| eMMC status: 0x01ff0000, control: 0x00000000 0x00000000 0x00000000 | |
| eMMC status: 0x01ff0000, control: 0x00000000 0x00000000 0x00000000 | |
| eMMC: configure to 1 bit bus | |
| eMMC status: 0x01ff0000, control: 0x00000f00 0x00000000 0x00000000 | |
| eMMC status: 0x01ff0000, control: 0x00000f00 0x00000000 0x00000000 | |
| desired SD clock: 100000, actual: 100000 (divisor 499) | |
| eMMC status: 0x01ff0000, control: 0x00000f00 0x0000f347 0x00000000 | |
| eMMC: configure to 1 bit bus | |
| eMMC status: 0x01ff0000, control: 0x00000f00 0x0000f347 0x00000000 | |
| eMMC: configure to 1 bit bus | |
| eMMC status: 0x01ff0000, control: 0x00000f00 0x0000f347 0x00000000 | |
| usb 1-1: new high speed USB device number 2 using dwc_otg | |
| eMMC: configure to 1 bit bus | |
| eMMC status: 0x01ff0000, control: 0x00000f00 0x0000f347 0x00000000 | |
| eMMC: configure to 1 bit bus | |
| eMMC status: 0x01ff0000, control: 0x00000f00 0x0000f347 0x00000000 | |
| eMMC: configure to 1 bit bus | |
| eMMC status: 0x01ff0000, control: 0x00000f00 0x0000f347 0x00000000 | |
| eMMC: configure to 1 bit bus | |
| eMMC status: 0x01ff0000, control: 0x00000f00 0x0000f347 0x00000000 | |
| eMMC: configure to 1 bit bus | |
| eMMC status: 0x01ff0000, control: 0x00000f00 0x0000f347 0x00000000 | |
| mmc0: problem reading SD Status register. | |
| mmc0: error -110 whilst initialising SD card | |
| eMMC: configure to 1 bit bus | |
| eMMC status: 0x01ff0000, control: 0x00000000 0x00000000 0x00000000 | |
| eMMC status: 0x01ff0000, control: 0x00000000 0x00000000 0x00000000 | |
| usb 1-1: New USB device found, idVendor=0424, idProduct=9512 | |
| usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 | |
| hub 1-1:1.0: USB hub found | |
| hub 1-1:1.0: 3 ports detected | |
| usb 1-1.1: new high speed USB device number 3 using dwc_otg | |
| usb 1-1.1: New USB device found, idVendor=0424, idProduct=ec00 | |
| usb 1-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 | |
| smsc95xx v1.0.4 | |
| smsc95xx 1-1.1:1.0: eth0: register 'smsc95xx' at usb-bcm2708_usb-1.1, smsc95xx USB 2.0 Ethernet, b8:27:eb:bd:10:0b | |
| usb 1-1.2: new full speed USB device number 4 using dwc_otg | |
| usb 1-1.2: New USB device found, idVendor=046d, idProduct=c52b | |
| usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 | |
| usb 1-1.2: Product: USB Receiver | |
| usb 1-1.2: Manufacturer: Logitech | |
| input: Logitech USB Receiver as /devices/platform/bcm2708_usb/usb1/1-1/1-1.2/1-1.2:1.0/input/input0 | |
| generic-usb 0003:046D:C52B.0001: input: USB HID v1.11 Keyboard [Logitech USB Receiver] on usb-bcm2708_usb-1.2/input0 | |
| input: Logitech USB Receiver as /devices/platform/bcm2708_usb/usb1/1-1/1-1.2/1-1.2:1.1/input/input1 | |
| generic-usb 0003:046D:C52B.0002: input,hiddev0: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-bcm2708_usb-1.2/input1 | |
| generic-usb 0003:046D:C52B.0003: hiddev0: USB HID v1.11 Device [Logitech USB Receiver] on usb-bcm2708_usb-1.2/input2 | |
| eMMC: configure to 1 bit bus | |
| eMMC status: 0x01ff0000, control: 0x00000f00 0x00000000 0x00000000 | |
| eMMC status: 0x01ff0000, control: 0x00000f00 0x00000000 0x00000000 | |
| desired SD clock: 400000, actual: 400000 (divisor 124) | |
| eMMC status: 0x01ff0000, control: 0x00000f00 0x00007c07 0x00000000 | |
| eMMC: configure to 1 bit bus | |
| eMMC status: 0x01ff0000, control: 0x00000f00 0x00007c07 0x00000000 | |
| eMMC: configure to 1 bit bus | |
| eMMC status: 0x01ff0000, control: 0x00000f00 0x00007c07 0x00000000 | |
| eMMC: configure to 1 bit bus | |
| eMMC status: 0x01ff0000, control: 0x00000f00 0x00007c07 0x00000000 | |
| eMMC: configure to 1 bit bus | |
| eMMC status: 0x01ff0000, control: 0x00000f00 0x00007c07 0x00000000 | |
| eMMC: configure to 1 bit bus | |
| eMMC status: 0x01ff0000, control: 0x00000f00 0x00007c07 0x00000000 | |
| eMMC: configure to 1 bit bus | |
| eMMC status: 0x01ff0000, control: 0x00000f00 0x00007c07 0x00000000 | |
| eMMC: configure to 1 bit bus | |
| eMMC status: 0x01ff0000, control: 0x00000f00 0x00007c07 0x00000000 | |
| eMMC: configure to 1 bit bus | |
| eMMC status: 0x01ff0000, control: 0x00000f00 0x000e7c07 0x00000000 | |
| eMMC status: 0x01ff0000, control: 0x00000f04 0x000e0000 0x00000000 | |
| desired SD clock: 50000000, actual: 50000000 (divisor 0) | |
| eMMC status: 0x01ff0000, control: 0x00000f04 0x000e0007 0x00000000 | |
| eMMC: configure to 1 bit bus | |
| eMMC status: 0x01ff0000, control: 0x00000f04 0x000e0007 0x00000000 | |
| mmc0: error -110 whilst initialising SD card | |
| eMMC: configure to 1 bit bus | |
| eMMC status: 0x01ff0000, control: 0x00000000 0x00000000 0x00000000 | |
| eMMC status: 0x01ff0000, control: 0x00000000 0x00000000 0x00000000 | |
| eMMC: configure to 1 bit bus | |
| eMMC status: 0x01ff0000, control: 0x00000f00 0x00000000 0x00000000 | |
| eMMC status: 0x01ff0000, control: 0x00000f00 0x00000000 0x00000000 | |
| desired SD clock: 300000, actual: 299401 (divisor 166) | |
| eMMC status: 0x01ff0000, control: 0x00000f00 0x0000a607 0x00000000 | |
| eMMC: configure to 1 bit bus | |
| eMMC status: 0x01ff0000, control: 0x00000f00 0x0000a607 0x00000000 | |
| eMMC: configure to 1 bit bus | |
| eMMC status: 0x01ff0000, control: 0x00000f00 0x0000a607 0x00000000 | |
| eMMC: configure to 1 bit bus | |
| eMMC status: 0x01ff0000, control: 0x00000f00 0x0000a607 0x00000000 | |
| eMMC: configure to 1 bit bus | |
| eMMC status: 0x01ff0000, control: 0x00000f00 0x0000a607 0x00000000 | |
| eMMC: configure to 1 bit bus | |
| eMMC status: 0x01ff0000, control: 0x00000f00 0x0000a607 0x00000000 | |
| eMMC: configure to 1 bit bus | |
| eMMC status: 0x01ff0000, control: 0x00000f00 0x0000a607 0x00000000 | |
| eMMC: configure to 1 bit bus | |
| eMMC status: 0x01ff0000, control: 0x00000f00 0x0000a607 0x00000000 | |
| mmc0: problem reading SD Status register. | |
| mmc0: error -110 whilst initialising SD card | |
| eMMC: configure to 1 bit bus | |
| eMMC status: 0x01ff0000, control: 0x00000000 0x00000000 0x00000000 | |
| eMMC status: 0x01ff0000, control: 0x00000000 0x00000000 0x00000000 | |
| eMMC: configure to 1 bit bus | |
| eMMC status: 0x01ff0000, control: 0x00000f00 0x00000000 0x00000000 | |
| eMMC status: 0x01ff0000, control: 0x00000f00 0x00000000 0x00000000 | |
| desired SD clock: 200000, actual: 200000 (divisor 249) | |
| eMMC status: 0x01ff0000, control: 0x00000f00 0x0000f907 0x00000000 | |
| eMMC: configure to 1 bit bus | |
| eMMC status: 0x01ff0000, control: 0x00000f00 0x0000f907 0x00000000 | |
| eMMC: configure to 1 bit bus | |
| eMMC status: 0x01ff0000, control: 0x00000f00 0x0000f907 0x00000000 | |
| eMMC: configure to 1 bit bus | |
| eMMC status: 0x01ff0000, control: 0x00000f00 0x0000f907 0x00000000 | |
| eMMC: configure to 1 bit bus | |
| eMMC status: 0x01ff0000, control: 0x00000f00 0x0000f907 0x00000000 | |
| eMMC: configure to 1 bit bus | |
| eMMC status: 0x01ff0000, control: 0x00000f00 0x0000f907 0x00000000 | |
| eMMC: configure to 1 bit bus | |
| eMMC status: 0x01ff0000, control: 0x00000f00 0x0000f907 0x00000000 | |
| eMMC: configure to 1 bit bus | |
| eMMC status: 0x01ff0000, control: 0x00000f00 0x0000f907 0x00000000 | |
| mmc0: problem reading SD Status register. | |
| mmc0: error -110 whilst initialising SD card | |
| eMMC: configure to 1 bit bus | |
| eMMC status: 0x01ff0000, control: 0x00000000 0x00000000 0x00000000 | |
| eMMC status: 0x01ff0000, control: 0x00000000 0x00000000 0x00000000 | |
| eMMC: configure to 1 bit bus | |
| eMMC status: 0x01ff0000, control: 0x00000f00 0x00000000 0x00000000 | |
| eMMC status: 0x01ff0000, control: 0x00000f00 0x00000000 0x00000000 | |
| desired SD clock: 100000, actual: 100000 (divisor 499) | |
| eMMC status: 0x01ff0000, control: 0x00000f00 0x0000f347 0x00000000 | |
| eMMC: configure to 1 bit bus | |
| eMMC status: 0x01ff0000, control: 0x00000f00 0x0000f347 0x00000000 | |
| eMMC: configure to 1 bit bus | |
| eMMC status: 0x01ff0000, control: 0x00000f00 0x0000f347 0x00000000 | |
| eMMC: configure to 1 bit bus | |
| eMMC status: 0x01ff0000, control: 0x00000f00 0x0000f347 0x00000000 | |
| eMMC: configure to 1 bit bus | |
| eMMC status: 0x01ff0000, control: 0x00000f00 0x0000f347 0x00000000 | |
| eMMC: configure to 1 bit bus | |
| eMMC status: 0x01ff0000, control: 0x00000f00 0x0000f347 0x00000000 | |
| eMMC: configure to 1 bit bus | |
| eMMC status: 0x01ff0000, control: 0x00000f00 0x0000f347 0x00000000 | |
| eMMC: configure to 1 bit bus | |
| eMMC status: 0x01ff0000, control: 0x00000f00 0x0000f347 0x00000000 | |
| mmc0: problem reading SD Status register. | |
| mmc0: error -110 whilst initialising SD card | |
| eMMC: configure to 1 bit bus | |
| eMMC status: 0x01ff0000, control: 0x00000000 0x00000000 0x00000000 | |
| eMMC status: 0x01ff0000, control: 0x00000000 0x00000000 0x00000000 | |
| eMMC: configure to 1 bit bus | |
| eMMC status: 0x01ff0000, control: 0x00000f00 0x00000000 0x00000000 | |
| eMMC status: 0x01ff0000, control: 0x00000f00 0x00000000 0x00000000 | |
| desired SD clock: 400000, actual: 400000 (divisor 124) | |
| eMMC status: 0x01ff0000, control: 0x00000f00 0x00007c07 0x00000000 | |
| eMMC: configure to 1 bit bus | |
| eMMC status: 0x01ff0000, control: 0x00000f00 0x00007c07 0x00000000 | |
| eMMC: configure to 1 bit bus | |
| eMMC status: 0x01ff0000, control: 0x00000f00 0x00007c07 0x00000000 | |
| eMMC: configure to 1 bit bus | |
| eMMC status: 0x01ff0000, control: 0x00000f00 0x00007c07 0x00000000 | |
| eMMC: configure to 1 bit bus | |
| eMMC status: 0x01ff0000, control: 0x00000f00 0x00007c07 0x00000000 | |
| eMMC: configure to 1 bit bus | |
| eMMC status: 0x01ff0000, control: 0x00000f00 0x00007c07 0x00000000 | |
| eMMC: configure to 1 bit bus | |
| eMMC status: 0x01ff0000, control: 0x00000f00 0x00007c07 0x00000000 | |
| eMMC: configure to 1 bit bus | |
| eMMC status: 0x01ff0000, control: 0x00000f00 0x00007c07 0x00000000 | |
| eMMC: configure to 1 bit bus | |
| eMMC status: 0x01ff0000, control: 0x00000f00 0x000e7c07 0x00000000 | |
| eMMC status: 0x01ff0000, control: 0x00000f04 0x000e0000 0x00000000 | |
| desired SD clock: 50000000, actual: 50000000 (divisor 0) | |
| eMMC status: 0x01ff0000, control: 0x00000f04 0x000e0007 0x00000000 | |
| eMMC: configure to 1 bit bus | |
| eMMC status: 0x01ff0000, control: 0x00000f04 0x000e0007 0x00000000 | |
| mmc0: error -110 whilst initialising SD card | |
| eMMC: configure to 1 bit bus | |
| eMMC status: 0x01ff0000, control: 0x00000000 0x00000000 0x00000000 | |
| eMMC status: 0x01ff0000, control: 0x00000000 0x00000000 0x00000000 | |
| eMMC: configure to 1 bit bus | |
| eMMC status: 0x01ff0000, control: 0x00000f00 0x00000000 0x00000000 | |
| eMMC status: 0x01ff0000, control: 0x00000f00 0x00000000 0x00000000 | |
| desired SD clock: 300000, actual: 299401 (divisor 166) | |
| eMMC status: 0x01ff0000, control: 0x00000f00 0x0000a607 0x00000000 | |
| eMMC: configure to 1 bit bus | |
| eMMC status: 0x01ff0000, control: 0x00000f00 0x0000a607 0x00000000 | |
| eMMC: configure to 1 bit bus | |
| eMMC status: 0x01ff0000, control: 0x00000f00 0x0000a607 0x00000000 | |
| eMMC: configure to 1 bit bus | |
| eMMC status: 0x01ff0000, control: 0x00000f00 0x0000a607 0x00000000 | |
| eMMC: configure to 1 bit bus | |
| eMMC status: 0x01ff0000, control: 0x00000f00 0x0000a607 0x00000000 | |
| eMMC: configure to 1 bit bus | |
| eMMC status: 0x01ff0000, control: 0x00000f00 0x0000a607 0x00000000 | |
| eMMC: configure to 1 bit bus | |
| eMMC status: 0x01ff0000, control: 0x00000f00 0x0000a607 0x00000000 | |
| eMMC: configure to 1 bit bus | |
| eMMC status: 0x01ff0000, control: 0x00000f00 0x0000a607 0x00000000 | |
| mmc0: problem reading SD Status register. | |
| mmc0: error -110 whilst initialising SD card | |
| eMMC: configure to 1 bit bus | |
| eMMC status: 0x01ff0000, control: 0x00000000 0x00000000 0x00000000 | |
| eMMC status: 0x01ff0000, control: 0x00000000 0x00000000 0x00000000 | |
| eMMC: configure to 1 bit bus | |
| eMMC status: 0x01ff0000, control: 0x00000f00 0x00000000 0x00000000 | |
| eMMC status: 0x01ff0000, control: 0x00000f00 0x00000000 0x00000000 | |
| desired SD clock: 200000, actual: 200000 (divisor 249) | |
| eMMC status: 0x01ff0000, control: 0x00000f00 0x0000f907 0x00000000 | |
| eMMC: configure to 1 bit bus | |
| eMMC status: 0x01ff0000, control: 0x00000f00 0x0000f907 0x00000000 | |
| eMMC: configure to 1 bit bus | |
| eMMC status: 0x01ff0000, control: 0x00000f00 0x0000f907 0x00000000 | |
| eMMC: configure to 1 bit bus | |
| eMMC status: 0x01ff0000, control: 0x00000f00 0x0000f907 0x00000000 | |
| eMMC: configure to 1 bit bus | |
| eMMC status: 0x01ff0000, control: 0x00000f00 0x0000f907 0x00000000 | |
| eMMC: configure to 1 bit bus | |
| eMMC status: 0x01ff0000, control: 0x00000f00 0x0000f907 0x00000000 | |
| eMMC: configure to 1 bit bus | |
| eMMC status: 0x01ff0000, control: 0x00000f00 0x0000f907 0x00000000 | |
| eMMC: configure to 1 bit bus | |
| eMMC status: 0x01ff0000, control: 0x00000f00 0x0000f907 0x00000000 | |
| mmc0: problem reading SD Status register. | |
| mmc0: error -110 whilst initialising SD card | |
| eMMC: configure to 1 bit bus | |
| eMMC status: 0x01ff0000, control: 0x00000000 0x00000000 0x00000000 | |
| eMMC status: 0x01ff0000, control: 0x00000000 0x00000000 0x00000000 | |
| eMMC: configure to 1 bit bus | |
| eMMC status: 0x01ff0000, control: 0x00000f00 0x00000000 0x00000000 | |
| eMMC status: 0x01ff0000, control: 0x00000f00 0x00000000 0x00000000 | |
| desired SD clock: 100000, actual: 100000 (divisor 499) | |
| eMMC status: 0x01ff0000, control: 0x00000f00 0x0000f347 0x00000000 | |
| eMMC: configure to 1 bit bus | |
| eMMC status: 0x01ff0000, control: 0x00000f00 0x0000f347 0x00000000 | |
| eMMC: configure to 1 bit bus | |
| eMMC status: 0x01ff0000, control: 0x00000f00 0x0000f347 0x00000000 | |
| eMMC: configure to 1 bit bus | |
| eMMC status: 0x01ff0000, control: 0x00000f00 0x0000f347 0x00000000 | |
| eMMC: configure to 1 bit bus | |
| eMMC status: 0x01ff0000, control: 0x00000f00 0x0000f347 0x00000000 | |
| eMMC: configure to 1 bit bus | |
| eMMC status: 0x01ff0000, control: 0x00000f00 0x0000f347 0x00000000 | |
| eMMC: configure to 1 bit bus | |
| eMMC status: 0x01ff0000, control: 0x00000f00 0x0000f347 0x00000000 | |
| eMMC: configure to 1 bit bus | |
| eMMC status: 0x01ff0000, control: 0x00000f00 0x0000f347 0x00000000 | |
| mmc0: problem reading SD Status register. | |
| mmc0: error -110 whilst initialising SD card | |
| eMMC: configure to 1 bit bus | |
| eMMC status: 0x01ff0000, control: 0x00000000 0x00000000 0x00000000 | |
| eMMC status: 0x01ff0000, control: 0x00000000 0x00000000 0x00000000 | |
| eMMC: configure to 1 bit bus | |
| eMMC status: 0x01ff0000, control: 0x00000f00 0x00000000 0x00000000 | |
| eMMC status: 0x01ff0000, control: 0x00000f00 0x00000000 0x00000000 | |
| desired SD clock: 400000, actual: 400000 (divisor 124) | |
| eMMC status: 0x01ff0000, control: 0x00000f00 0x00007c07 0x00000000 | |
| eMMC: configure to 1 bit bus | |
| eMMC status: 0x01ff0000, control: 0x00000f00 0x00007c07 0x00000000 | |
| eMMC: configure to 1 bit bus | |
| eMMC status: 0x01ff0000, control: 0x00000f00 0x00007c07 0x00000000 | |
| eMMC: configure to 1 bit bus | |
| eMMC status: 0x01ff0000, control: 0x00000f00 0x00007c07 0x00000000 | |
| eMMC: configure to 1 bit bus | |
| eMMC status: 0x01ff0000, control: 0x00000f00 0x00007c07 0x00000000 | |
| eMMC: configure to 1 bit bus | |
| eMMC status: 0x01ff0000, control: 0x00000f00 0x00007c07 0x00000000 | |
| eMMC: configure to 1 bit bus | |
| eMMC status: 0x01ff0000, control: 0x00000f00 0x00007c07 0x00000000 | |
| eMMC: configure to 1 bit bus | |
| eMMC status: 0x01ff0000, control: 0x00000f00 0x00007c07 0x00000000 | |
| mmc0: problem reading SD Status register. | |
| eMMC: configure to 1 bit bus | |
| eMMC status: 0x01ff0000, control: 0x00000f00 0x000e7c07 0x00000000 | |
| eMMC status: 0x01ff0000, control: 0x00000f04 0x000e0000 0x00000000 | |
| desired SD clock: 50000000, actual: 50000000 (divisor 0) | |
| eMMC status: 0x01ff0000, control: 0x00000f04 0x000e0007 0x00000000 | |
| eMMC: configure to 1 bit bus | |
| eMMC status: 0x01ff0000, control: 0x00000f04 0x000e0007 0x00000000 | |
| mmc0: error -110 whilst initialising SD card | |
| eMMC: configure to 1 bit bus | |
| eMMC status: 0x01ff0000, control: 0x00000000 0x00000000 0x00000000 | |
| eMMC status: 0x01ff0000, control: 0x00000000 0x00000000 0x00000000 | |
| eMMC: configure to 1 bit bus | |
| eMMC status: 0x01ff0000, control: 0x00000f00 0x00000000 0x00000000 | |
| eMMC status: 0x01ff0000, control: 0x00000f00 0x00000000 0x00000000 | |
| desired SD clock: 300000, actual: 299401 (divisor 166) | |
| eMMC status: 0x01ff0000, control: 0x00000f00 0x0000a607 0x00000000 | |
| eMMC: configure to 1 bit bus | |
| eMMC status: 0x01ff0000, control: 0x00000f00 0x0000a607 0x00000000 | |
| eMMC: configure to 1 bit bus | |
| eMMC status: 0x01ff0000, control: 0x00000f00 0x0000a607 0x00000000 | |
| eMMC: configure to 1 bit bus | |
| eMMC status: 0x01ff0000, control: 0x00000f00 0x0000a607 0x00000000 | |
| eMMC: configure to 1 bit bus | |
| eMMC status: 0x01ff0000, control: 0x00000f00 0x0000a607 0x00000000 | |
| eMMC: configure to 1 bit bus | |
| eMMC status: 0x01ff0000, control: 0x00000f00 0x0000a607 0x00000000 | |
| eMMC: configure to 1 bit bus | |
| eMMC status: 0x01ff0000, control: 0x00000f00 0x0000a607 0x00000000 | |
| eMMC: configure to 1 bit bus | |
| eMMC status: 0x01ff0000, control: 0x00000f00 0x0000a607 0x00000000 | |
| eMMC: configure to 1 bit bus | |
| eMMC status: 0x01ff0000, control: 0x00000f00 0x000ea607 0x00000000 | |
| eMMC status: 0x01ff0000, control: 0x00000f04 0x000e0000 0x00000000 | |
| desired SD clock: 50000000, actual: 50000000 (divisor 0) | |
| eMMC status: 0x01ff0000, control: 0x00000f04 0x000e0007 0x00000000 | |
| eMMC: configure to 1 bit bus | |
| eMMC status: 0x01ff0000, control: 0x00000f04 0x000e0007 0x00000000 | |
| mmc0: error -110 whilst initialising SD card | |
| eMMC: configure to 1 bit bus | |
| eMMC status: 0x01ff0000, control: 0x00000000 0x00000000 0x00000000 | |
| eMMC status: 0x01ff0000, control: 0x00000000 0x00000000 0x00000000 | |
| eMMC: configure to 1 bit bus | |
| eMMC status: 0x01ff0000, control: 0x00000f00 0x00000000 0x00000000 | |
| eMMC status: 0x01ff0000, control: 0x00000f00 0x00000000 0x00000000 | |
| desired SD clock: 200000, actual: 200000 (divisor 249) | |
| eMMC status: 0x01ff0000, control: 0x00000f00 0x0000f907 0x00000000 | |
| eMMC: configure to 1 bit bus | |
| eMMC status: 0x01ff0000, control: 0x00000f00 0x0000f907 0x00000000 | |
| eMMC: configure to 1 bit bus | |
| eMMC status: 0x01ff0000, control: 0x00000f00 0x0000f907 0x00000000 | |
| eMMC: configure to 1 bit bus | |
| eMMC status: 0x01ff0000, control: 0x00000f00 0x0000f907 0x00000000 | |
| eMMC: configure to 1 bit bus | |
| eMMC status: 0x01ff0000, control: 0x00000f00 0x0000f907 0x00000000 | |
| eMMC: configure to 1 bit bus | |
| eMMC status: 0x01ff0000, control: 0x00000f00 0x0000f907 0x00000000 | |
| eMMC: configure to 1 bit bus | |
| eMMC status: 0x01ff0000, control: 0x00000f00 0x0000f907 0x00000000 | |
| eMMC: configure to 1 bit bus | |
| eMMC status: 0x01ff0000, control: 0x00000f00 0x0000f907 0x00000000 | |
| eMMC: configure to 1 bit bus | |
| eMMC status: 0x01ff0000, control: 0x00000f00 0x000ef907 0x00000000 | |
| eMMC status: 0x01ff0000, control: 0x00000f04 0x000e0000 0x00000000 | |
| desired SD clock: 50000000, actual: 50000000 (divisor 0) | |
| eMMC status: 0x01ff0000, control: 0x00000f04 0x000e0007 0x00000000 | |
| eMMC: configure to 1 bit bus | |
| eMMC status: 0x01ff0000, control: 0x00000f04 0x000e0007 0x00000000 | |
| mmc0: error -110 whilst initialising SD card | |
| eMMC: configure to 1 bit bus | |
| eMMC status: 0x01ff0000, control: 0x00000000 0x00000000 0x00000000 | |
| eMMC status: 0x01ff0000, control: 0x00000000 0x00000000 0x00000000 | |
| eMMC: configure to 1 bit bus | |
| eMMC status: 0x01ff0000, control: 0x00000f00 0x00000000 0x00000000 | |
| eMMC status: 0x01ff0000, control: 0x00000f00 0x00000000 0x00000000 | |
| desired SD clock: 100000, actual: 100000 (divisor 499) | |
| eMMC status: 0x01ff0000, control: 0x00000f00 0x0000f347 0x00000000 | |
| eMMC: configure to 1 bit bus | |
| eMMC status: 0x01ff0000, control: 0x00000f00 0x0000f347 0x00000000 | |
| eMMC: configure to 1 bit bus | |
| eMMC status: 0x01ff0000, control: 0x00000f00 0x0000f347 0x00000000 | |
| eMMC: configure to 1 bit bus | |
| eMMC status: 0x01ff0000, control: 0x00000f00 0x0000f347 0x00000000 | |
| eMMC: configure to 1 bit bus | |
| eMMC status: 0x01ff0000, control: 0x00000f00 0x0000f347 0x00000000 | |
| eMMC: configure to 1 bit bus | |
| eMMC status: 0x01ff0000, control: 0x00000f00 0x0000f347 0x00000000 | |
| eMMC: configure to 1 bit bus | |
| eMMC status: 0x01ff0000, control: 0x00000f00 0x0000f347 0x00000000 | |
| eMMC: configure to 1 bit bus | |
| eMMC status: 0x01ff0000, control: 0x00000f00 0x0000f347 0x00000000 | |
| mmc0: problem reading SD Status register. | |
| mmc0: error -110 whilst initialising SD card | |
| eMMC: configure to 1 bit bus | |
| eMMC status: 0x01ff0000, control: 0x00000000 0x00000000 0x00000000 | |
| eMMC status: 0x01ff0000, control: 0x00000000 0x00000000 0x00000000 | |
| eMMC: configure to 1 bit bus | |
| eMMC status: 0x01ff0000, control: 0x00000f00 0x00000000 0x00000000 | |
| eMMC status: 0x01ff0000, control: 0x00000f00 0x00000000 0x00000000 | |
| desired SD clock: 400000, actual: 400000 (divisor 124) | |
| eMMC status: 0x01ff0000, control: 0x00000f00 0x00007c07 0x00000000 | |
| eMMC: configure to 1 bit bus | |
| eMMC status: 0x01ff0000, control: 0x00000f00 0x00007c07 0x00000000 | |
| eMMC: configure to 1 bit bus | |
| eMMC status: 0x01ff0000, control: 0x00000f00 0x00007c07 0x00000000 | |
| eMMC: configure to 1 bit bus | |
| eMMC status: 0x01ff0000, control: 0x00000f00 0x00007c07 0x00000000 | |
| eMMC: configure to 1 bit bus | |
| eMMC status: 0x01ff0000, control: 0x00000f00 0x00007c07 0x00000000 | |
| eMMC: configure to 1 bit bus | |
| eMMC status: 0x01ff0000, control: 0x00000f00 0x00007c07 0x00000000 | |
| eMMC: configure to 1 bit bus | |
| eMMC status: 0x01ff0000, control: 0x00000f00 0x00007c07 0x00000000 | |
| eMMC: configure to 1 bit bus | |
| eMMC status: 0x01ff0000, control: 0x00000f00 0x00007c07 0x00000000 | |
| mmc0: problem reading SD Status register. | |
| eMMC: configure to 1 bit bus | |
| eMMC status: 0x01ff0000, control: 0x00000f00 0x000e7c07 0x00000000 | |
| eMMC status: 0x01ff0000, control: 0x00000f04 0x000e0000 0x00000000 | |
| desired SD clock: 50000000, actual: 50000000 (divisor 0) | |
| eMMC status: 0x01ff0000, control: 0x00000f04 0x000e0007 0x00000000 | |
| eMMC: configure to 1 bit bus | |
| eMMC status: 0x01ff0000, control: 0x00000f04 0x000e0007 0x00000000 | |
| mmc0: error -110 whilst initialising SD card | |
| eMMC: configure to 1 bit bus | |
| eMMC status: 0x01ff0000, control: 0x00000000 0x00000000 0x00000000 | |
| eMMC status: 0x01ff0000, control: 0x00000000 0x00000000 0x00000000 | |
| eMMC: configure to 1 bit bus | |
| eMMC status: 0x01ff0000, control: 0x00000f00 0x00000000 0x00000000 | |
| eMMC status: 0x01ff0000, control: 0x00000f00 0x00000000 0x00000000 | |
| desired SD clock: 300000, actual: 299401 (divisor 166) | |
| eMMC status: 0x01ff0000, control: 0x00000f00 0x0000a607 0x00000000 | |
| eMMC: configure to 1 bit bus | |
| eMMC status: 0x01ff0000, control: 0x00000f00 0x0000a607 0x00000000 | |
| eMMC: configure to 1 bit bus | |
| eMMC status: 0x01ff0000, control: 0x00000f00 0x0000a607 0x00000000 | |
| eMMC: configure to 1 bit bus | |
| eMMC status: 0x01ff0000, control: 0x00000f00 0x0000a607 0x00000000 | |
| eMMC: configure to 1 bit bus | |
| eMMC status: 0x01ff0000, control: 0x00000f00 0x0000a607 0x00000000 | |
| eMMC: configure to 1 bit bus | |
| eMMC status: 0x01ff0000, control: 0x00000f00 0x0000a607 0x00000000 | |
| eMMC: configure to 1 bit bus | |
| eMMC status: 0x01ff0000, control: 0x00000f00 0x0000a607 0x00000000 | |
| eMMC: configure to 1 bit bus | |
| eMMC status: 0x01ff0000, control: 0x00000f00 0x0000a607 0x00000000 | |
| mmc0: problem reading SD Status register. | |
| mmc0: error -110 whilst initialising SD card | |
| eMMC: configure to 1 bit bus | |
| eMMC status: 0x01ff0000, control: 0x00000000 0x00000000 0x00000000 | |
| eMMC status: 0x01ff0000, control: 0x00000000 0x00000000 0x00000000 | |
| eMMC: configure to 1 bit bus | |
| eMMC status: 0x01ff0000, control: 0x00000f00 0x00000000 0x00000000 | |
| eMMC status: 0x01ff0000, control: 0x00000f00 0x00000000 0x00000000 | |
| desired SD clock: 200000, actual: 200000 (divisor 249) | |
| eMMC status: 0x01ff0000, control: 0x00000f00 0x0000f907 0x00000000 | |
| eMMC: configure to 1 bit bus | |
| eMMC status: 0x01ff0000, control: 0x00000f00 0x0000f907 0x00000000 | |
| eMMC: configure to 1 bit bus | |
| eMMC status: 0x01ff0000, control: 0x00000f00 0x0000f907 0x00000000 | |
| eMMC: configure to 1 bit bus | |
| eMMC status: 0x01ff0000, control: 0x00000f00 0x0000f907 0x00000000 | |
| eMMC: configure to 1 bit bus | |
| eMMC status: 0x01ff0000, control: 0x00000f00 0x0000f907 0x00000000 | |
| eMMC: configure to 1 bit bus | |
| eMMC status: 0x01ff0000, control: 0x00000f00 0x0000f907 0x00000000 | |
| eMMC: configure to 1 bit bus | |
| eMMC status: 0x01ff0000, control: 0x00000f00 0x0000f907 0x00000000 | |
| eMMC: configure to 1 bit bus | |
| eMMC status: 0x01ff0000, control: 0x00000f00 0x0000f907 0x00000000 | |
| mmc0: problem reading SD Status register. | |
| mmc0: error -110 whilst initialising SD card | |
| eMMC: configure to 1 bit bus | |
| eMMC status: 0x01ff0000, control: 0x00000000 0x00000000 0x00000000 | |
| eMMC status: 0x01ff0000, control: 0x00000000 0x00000000 0x00000000 | |
| eMMC: configure to 1 bit bus | |
| eMMC status: 0x01ff0000, control: 0x00000f00 0x00000000 0x00000000 | |
| eMMC status: 0x01ff0000, control: 0x00000f00 0x00000000 0x00000000 | |
| desired SD clock: 100000, actual: 100000 (divisor 499) | |
| eMMC status: 0x01ff0000, control: 0x00000f00 0x0000f347 0x00000000 | |
| eMMC: configure to 1 bit bus | |
| eMMC status: 0x01ff0000, control: 0x00000f00 0x0000f347 0x00000000 | |
| eMMC: configure to 1 bit bus | |
| eMMC status: 0x01ff0000, control: 0x00000f00 0x0000f347 0x00000000 | |
| eMMC: configure to 1 bit bus | |
| eMMC status: 0x01ff0000, control: 0x00000f00 0x0000f347 0x00000000 | |
| eMMC: configure to 1 bit bus | |
| eMMC status: 0x01ff0000, control: 0x00000f00 0x0000f347 0x00000000 | |
| eMMC: configure to 1 bit bus | |
| eMMC status: 0x01ff0000, control: 0x00000f00 0x0000f347 0x00000000 | |
| eMMC: configure to 1 bit bus | |
| eMMC status: 0x01ff0000, control: 0x00000f00 0x0000f347 0x00000000 | |
| eMMC: configure to 1 bit bus | |
| eMMC status: 0x01ff0000, control: 0x00000f00 0x0000f347 0x00000000 | |
| mmc0: problem reading SD Status register. | |
| mmc0: error -110 whilst initialising SD card | |
| eMMC: configure to 1 bit bus | |
| eMMC status: 0x01ff0000, control: 0x00000000 0x00000000 0x00000000 | |
| eMMC status: 0x01ff0000, control: 0x00000000 0x00000000 0x00000000 | |
| eMMC: configure to 1 bit bus | |
| eMMC status: 0x01ff0000, control: 0x00000f00 0x00000000 0x00000000 | |
| eMMC status: 0x01ff0000, control: 0x00000f00 0x00000000 0x00000000 | |
| desired SD clock: 400000, actual: 400000 (divisor 124) | |
| eMMC status: 0x01ff0000, control: 0x00000f00 0x00007c07 0x00000000 | |
| eMMC: configure to 1 bit bus | |
| eMMC status: 0x01ff0000, control: 0x00000f00 0x00007c07 0x00000000 | |
| eMMC: configure to 1 bit bus | |
| eMMC status: 0x01ff0000, control: 0x00000f00 0x00007c07 0x00000000 | |
| eMMC: configure to 1 bit bus | |
| eMMC status: 0x01ff0000, control: 0x00000f00 0x00007c07 0x00000000 | |
| eMMC: configure to 1 bit bus | |
| eMMC status: 0x01ff0000, control: 0x00000f00 0x00007c07 0x00000000 | |
| eMMC: configure to 1 bit bus | |
| eMMC status: 0x01ff0000, control: 0x00000f00 0x00007c07 0x00000000 | |
| eMMC: configure to 1 bit bus | |
| eMMC status: 0x01ff0000, control: 0x00000f00 0x00007c07 0x00000000 | |
| eMMC: configure to 1 bit bus | |
| eMMC status: 0x01ff0000, control: 0x00000f00 0x00007c07 0x00000000 | |
| mmc0: Controller never released inhibit bit(s). | |
| mmc0: problem reading SD Status register. | |
| eMMC status: 0x01ff0000, control: 0x00000f00 0x000e0000 0x00000000 | |
| desired SD clock: 25000000, actual: 25000000 (divisor 1) | |
| eMMC status: 0x01ff0000, control: 0x00000f00 0x000e0107 0x00000000 | |
| eMMC: configure to 1 bit bus | |
| eMMC status: 0x01ff0000, control: 0x00000f00 0x000e0107 0x00000000 | |
| mmc0: new SDHC card at address b368 | |
| mmcblk0: mmc0:b368 LEXAR 7.45 GiB | |
| mmcblk0: error -110 transferring data, sector 0, nr 8, cmd response 0x920, card status 0xb00 | |
| mmcblk0: retrying using single block read | |
| mmc0: missed completion of cmd 17 DMA (512/512 [1]/[1]) - ignoring it | |
| mmc0: DMA IRQ 6 ignored - results were reset | |
| mmcblk0: p1 p2 |
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment