op1_keys.md

op-1 keys

tape mode

cmd	desc
shift + help	set date - time
shift + tempo	detune notes - cents
shift + tape	erase tape
shift + synth	undo edits and revert to the preset
shift + drum	undo edits and revert to the preset
shift + mixer	signal flow screen
blue (default)	explore the tape in bits of 1/24 seconds
blue (while playing)	scrub through tape
blue (while recording)	change pitch
shift + blue	slide a take
green	slide loop out
shift + green	slide loop in
white	change tape speed like +1, +2, +3
shift + white	change tape speed in percentages
orange	record level
shift + orange	sensitive record level (change in tiny bits)
t1-4	select track
shift + t1-4	mute/reactivate track
< >	rewind / forward
play + < >	fast rewind / forward
shift + < >	jump from bar to bar
stop + <	jump to the very beginning of the tape.
stop + >	jump to the end of the last take on the tape, if there are multiple tracks overlapping, this will go to the longest one of the last takes.
shift + play	reverse playback
rec (hold)	stand ready for recording (press a key)
shift + rec	stand ready for tape roll (press play to go)
split	a take to pieces
shift + split	join takes (joins the next closest take on either side of the active one)
lift	cut or delete a take
shift + lift	advanced lift - lift all tracks into memory.
region lift	use the loop in and out points to define the part you want to lift.
drop	paste a take (tape moves each time to the end of a dropped take)
sequencer	open/turn-off sequencer
shift + sequencer	select sequencer mode
(1) loop in	sets the loop in point of the tape.
(2) loop out	this sets the loop out point.
(3) loop toggle	toggles loop on and off, remembers the in and out of the previous loop
(3) (when playing)	recreates the previous loop
shift + loop toggle	loop current take.
(4) break	stops the tape. if a loop is active it will continue in the background to keep the break in time.
(5) reverse	change direction of the tape.
(6) chop	a tempo locked repeat type of effect.
(7)-(8) memo 1-2	memorize any parameter in tape or mixer for instant recall.

in synth (t2)

cmd	desc
shift	play mode

in drum mode engine (t1)

cmd	desc
blue	pitch
shift + blue	direction
green	in point
shift + green	fine tune in point, sensitive
white	out point
shift + white	fine tune out point, sensitive
orange	play mode
shift + orange	level

in drum mode dynamic envelope (t2)

cmd	desc
blue	attack level
green	mid-part level
white	release level
orange	adjust region

in synth and drum mode

cmd	desc
1-8	instant access keys to sounds
shift + synth	undo edits and tweaks (done with t1-4)
shift + 1-8	change the sound attached to the instant access key
shift + t1-4	change the modules of the sound without changing the sound.
< >	octave shift

for example, shift + t1 will change the synth engine but it will keep the tweaks and edits you made on the sound, contrary to shift + 1, which will change the sound itself by selecting a sound from one of the synth engines thus making you lose all the tweaks and edits you made.

in mixer mode

cmd	desc
shift + mixer	signal flow screen

---

sourced from an operator-1.com thread

Hey! Great gist (and original thread)! This would be great to have over at https://github.com/op1hacks :)