Created
December 24, 2019 11:41
-
-
Save shtirlic/8e2918b4d59011a167a626c1798d7e1c to your computer and use it in GitHub Desktop.
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
| System Information | |
| ------------------ | |
| Raspberry Pi Zero W Rev 1.1 | |
| PRETTY_NAME="Raspbian GNU/Linux 10 (buster)" | |
| NAME="Raspbian GNU/Linux" | |
| VERSION_ID="10" | |
| VERSION="10 (buster)" | |
| Raspberry Pi reference 2019-09-26 | |
| Generated using pi-gen, https://github.com/RPi-Distro/pi-gen, 80d486687ea77d31fc3fc13cf3a2f8b464e129be, stage2 | |
| Linux raspberrypi 4.19.75+ #1270 Tue Sep 24 18:38:54 BST 2019 armv6l GNU/Linux | |
| Revision : 9000c1 | |
| Serial : 0000000076f5bbfe | |
| Model : Raspberry Pi Zero W Rev 1.1 | |
| Throttled flag : throttled=0x0 | |
| Camera : supported=0 detected=0 | |
| Videocore information | |
| --------------------- | |
| Sep 24 2019 17:37:19 | |
| Copyright (c) 2012 Broadcom | |
| version 6820edeee4ef3891b95fc01cf02a7abd7ca52f17 (clean) (release) (start) | |
| alloc failures: 0 | |
| compactions: 0 | |
| legacy block fails: 0 | |
| Filesystem information | |
| ---------------------- | |
| Filesystem 1K-blocks Used Available Use% Mounted on | |
| /dev/root 29563044 2337868 25988584 9% / | |
| devtmpfs 184732 0 184732 0% /dev | |
| tmpfs 189060 0 189060 0% /dev/shm | |
| tmpfs 189060 2716 186344 2% /run | |
| tmpfs 5120 4 5116 1% /run/lock | |
| tmpfs 189060 0 189060 0% /sys/fs/cgroup | |
| /dev/mmcblk0p1 258095 53035 205061 21% /boot | |
| tmpfs 37812 0 37812 0% /run/user/1000 | |
| Filename Type Size Used Priority | |
| /var/swap file 102396 512 -2 | |
| Package version information | |
| --------------------------- | |
| raspberrypi-ui-mods: | |
| Installed: (none) | |
| raspberrypi-sys-mods: | |
| Installed: 20191105 | |
| openbox: | |
| Installed: (none) | |
| lxpanel: | |
| Installed: (none) | |
| pcmanfm: | |
| Installed: (none) | |
| rpd-plym-splash: | |
| Installed: (none) | |
| Networking Information | |
| ---------------------- | |
| lo: flags=73<UP,LOOPBACK,RUNNING> mtu 65536 | |
| inet x.x.x.x netmask x.x.x.x | |
| inet6 ::1 prefixlen 128 scopeid 0x10<host> | |
| loop txqueuelen 1000 (Local Loopback) | |
| RX packets 0 bytes 0 (0.0 B) | |
| RX errors 0 dropped 0 overruns 0 frame 0 | |
| TX packets 0 bytes 0 (0.0 B) | |
| TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0 | |
| wlan0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500 | |
| inet x.x.x.x netmask x.x.x.x broadcast x.x.x.x | |
| inet6 y::y.y.y.y prefixlen 64 scopeid 0x20<link> | |
| ether m.m.m.m txqueuelen 1000 (Ethernet) | |
| RX packets 1159954 bytes 1410377348 (1.3 GiB) | |
| RX errors 0 dropped 0 overruns 0 frame 0 | |
| TX packets 331105 bytes 32212361 (30.7 MiB) | |
| TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0 | |
| USB Information | |
| --------------- | |
| /: Bus 01.Port 1: Dev 1, Class=root_hub, Driver=dwc_otg/1p, 480M | |
| config.txt | |
| ---------- | |
| aphy_params_current=547 | |
| arm_freq=1000 | |
| audio_pwm_mode=514 | |
| config_hdmi_boost=10 | |
| core_freq=400 | |
| disable_auto_turbo=1 | |
| disable_commandline_tags=2 | |
| disable_overscan=1 | |
| display_hdmi_rotate=-1 | |
| display_lcd_rotate=-1 | |
| dphy_params_current=547 | |
| force_eeprom_read=1 | |
| force_pwm_open=1 | |
| framebuffer_ignore_alpha=1 | |
| framebuffer_swap=1 | |
| gpu_freq=300 | |
| ignore_lcd=1 | |
| init_uart_clock=0x2dc6c00 | |
| over_voltage_avs=0x249f0 | |
| pause_burst_frames=1 | |
| program_serial_random=1 | |
| sdram_freq=450 | |
| hdmi_drive:0=2 | |
| hdmi_force_cec_address:0=65535 | |
| hdmi_force_cec_address:1=65535 | |
| hdmi_group:0=2 | |
| hdmi_mode:0=82 | |
| hdmi_pixel_freq_limit:0=0x9a7ec80 | |
| hdmi_pixel_freq_limit:1=0x9a7ec80 | |
| device_tree=- | |
| hdmi_cvt:0= | |
| hdmi_cvt:1= | |
| hdmi_edid_filename:0= | |
| hdmi_edid_filename:1= | |
| hdmi_timings:0= | |
| hdmi_timings:1= | |
| cmdline.txt | |
| ----------- | |
| coherent_pool=1M 8250.nr_uarts=0 bcm2708_fb.fbwidth=1920 bcm2708_fb.fbheight=1080 bcm2708_fb.fbswap=1 smsc95xx.macaddr=B8:27:EB:F5:BB:FE vc_mem.mem_base=0x1ec00000 vc_mem.mem_size=0x20000000 console=ttyS0,115200 console=tty1 root=PARTUUID=6c586e13-02 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait | |
| raspi-gpio settings | |
| ------------------- | |
| BANK0 (GPIO 0 to 27): | |
| GPIO 0: level=1 fsel=0 func=INPUT | |
| GPIO 1: level=1 fsel=0 func=INPUT | |
| GPIO 2: level=1 fsel=0 func=INPUT | |
| GPIO 3: level=1 fsel=0 func=INPUT | |
| GPIO 4: level=1 fsel=0 func=INPUT | |
| GPIO 5: level=1 fsel=0 func=INPUT | |
| GPIO 6: level=1 fsel=0 func=INPUT | |
| GPIO 7: level=1 fsel=1 func=OUTPUT | |
| GPIO 8: level=1 fsel=1 func=OUTPUT | |
| GPIO 9: level=0 fsel=4 alt=0 func=SPI0_MISO | |
| GPIO 10: level=0 fsel=4 alt=0 func=SPI0_MOSI | |
| GPIO 11: level=0 fsel=4 alt=0 func=SPI0_SCLK | |
| GPIO 12: level=0 fsel=0 func=INPUT | |
| GPIO 13: level=0 fsel=0 func=INPUT | |
| GPIO 14: level=0 fsel=0 func=INPUT | |
| GPIO 15: level=1 fsel=0 func=INPUT | |
| GPIO 16: level=0 fsel=0 func=INPUT | |
| GPIO 17: level=0 fsel=0 func=INPUT | |
| GPIO 18: level=0 fsel=0 func=INPUT | |
| GPIO 19: level=0 fsel=0 func=INPUT | |
| GPIO 20: level=0 fsel=0 func=INPUT | |
| GPIO 21: level=0 fsel=0 func=INPUT | |
| GPIO 22: level=0 fsel=0 func=INPUT | |
| GPIO 23: level=0 fsel=0 func=INPUT | |
| GPIO 24: level=1 fsel=1 func=OUTPUT | |
| GPIO 25: level=1 fsel=1 func=OUTPUT | |
| GPIO 26: level=0 fsel=0 func=INPUT | |
| GPIO 27: level=1 fsel=1 func=OUTPUT | |
| BANK1 (GPIO 28 to 45): | |
| GPIO 28: level=1 fsel=0 func=INPUT | |
| GPIO 29: level=1 fsel=0 func=INPUT | |
| GPIO 30: level=0 fsel=7 alt=3 func=CTS0 | |
| GPIO 31: level=0 fsel=7 alt=3 func=RTS0 | |
| GPIO 32: level=1 fsel=7 alt=3 func=TXD0 | |
| GPIO 33: level=1 fsel=7 alt=3 func=RXD0 | |
| GPIO 34: level=1 fsel=7 alt=3 func=SD1_CLK | |
| GPIO 35: level=1 fsel=7 alt=3 func=SD1_CMD | |
| GPIO 36: level=1 fsel=7 alt=3 func=SD1_DAT0 | |
| GPIO 37: level=1 fsel=7 alt=3 func=SD1_DAT1 | |
| GPIO 38: level=1 fsel=7 alt=3 func=SD1_DAT2 | |
| GPIO 39: level=1 fsel=7 alt=3 func=SD1_DAT3 | |
| GPIO 40: level=0 fsel=1 func=OUTPUT | |
| GPIO 41: level=1 fsel=1 func=OUTPUT | |
| GPIO 42: level=0 fsel=0 func=INPUT | |
| GPIO 43: level=0 fsel=4 alt=0 func=GPCLK2 | |
| GPIO 44: level=0 fsel=1 func=OUTPUT | |
| GPIO 45: level=1 fsel=1 func=OUTPUT | |
| BANK2 (GPIO 46 to 53): | |
| GPIO 46: level=0 fsel=0 func=INPUT | |
| GPIO 47: level=0 fsel=1 func=OUTPUT | |
| GPIO 48: level=0 fsel=4 alt=0 func=SD0_CLK | |
| GPIO 49: level=1 fsel=4 alt=0 func=SD0_CMD | |
| GPIO 50: level=1 fsel=4 alt=0 func=SD0_DAT0 | |
| GPIO 51: level=1 fsel=4 alt=0 func=SD0_DAT1 | |
| GPIO 52: level=1 fsel=4 alt=0 func=SD0_DAT2 | |
| GPIO 53: level=1 fsel=4 alt=0 func=SD0_DAT3 | |
| vcdbg log messages | |
| ------------------ | |
| 001442.339: brfs: File read: /mfs/sd/config.txt | |
| 001443.118: brfs: File read: 1648 bytes | |
| 001521.300: brfs: File read: /mfs/sd/config.txt | |
| 001522.095: gpioman: gpioman_get_pin_num: pin LEDS_PWR_OK not defined | |
| 001704.533: gpioman: gpioman_get_pin_num: pin LEDS_PWR_OK not defined | |
| 001704.625: *** Restart logging | |
| 001704.690: brfs: File read: 1648 bytes | |
| 001735.342: hdmi: HDMI:hdmi_get_state is deprecated, use hdmi_get_display_state instead | |
| 001737.396: brfs: File read: /mfs/sd/cmdline.txt | |
| 001737.471: Read command line from file 'cmdline.txt': | |
| 001737.528: 'console=serial0,115200 console=tty1 root=PARTUUID=6c586e13-02 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait' 001742.213: brfs: File read: 121 bytes | |
| 001746.938: brfs: File read: /mfs/sd/bcm2708-rpi-zero-w.dtb | |
| 001747.003: Loading 'bcm2708-rpi-zero-w.dtb' to 0x100 size 0x5f57 | |
| 001838.547: brfs: File read: 24407 bytes | |
| 001841.130: brfs: File read: /mfs/sd/config.txt | |
| 001841.525: dtparam: spi=on | |
| 001851.365: dtparam: audio=on | |
| 003782.162: gpioman: gpioman_get_pin_num: pin EMMC_ENABLE not defined | |
| 003805.373: brfs: File read: 1648 bytes | |
| 004501.549: brfs: File read: /mfs/sd/kernel.img | |
| 004501.616: Loading 'kernel.img' to 0x8000 size 0x4cbd38 | |
| 004501.685: Device tree loaded to 0x17fe9c00 (size 0x6314) | |
| 004503.265: gpioman: gpioman_get_pin_num: pin SDCARD_CONTROL_POWER not defined | |
| 006508.786: vchiq_core: vchiq_init_state: slot_zero = 0x57580000, is_master = 1 | |
| 006515.766: hdmi: HDMI:hdmi_get_state is deprecated, use hdmi_get_display_state instead | |
| 006523.276: TV service:host side not connected, dropping notification 0x00000002, 0x00000002, 0x00000052 | |
| 023607.003: brfs: File read: 5029176 bytes | |
| dmesg log | |
| --------- | |
| [ 0.000000] Booting Linux on physical CPU 0x0 | |
| [ 0.000000] Linux version 4.19.75+ (dom@buildbot) (gcc version 4.9.3 (crosstool-NG crosstool-ng-1.22.0-88-g8460611)) #1270 Tue Sep 24 18:38:54 BST 2019 | |
| [ 0.000000] CPU: ARMv6-compatible processor [410fb767] revision 7 (ARMv7), cr=00c5387d | |
| [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT nonaliasing instruction cache | |
| [ 0.000000] OF: fdt: Machine model: Raspberry Pi Zero W Rev 1.1 | |
| [ 0.000000] Memory policy: Data cache writeback | |
| [ 0.000000] cma: Reserved 8 MiB at 0x17400000 | |
| [ 0.000000] On node 0 totalpages: 98304 | |
| [ 0.000000] Normal zone: 864 pages used for memmap | |
| [ 0.000000] Normal zone: 0 pages reserved | |
| [ 0.000000] Normal zone: 98304 pages, LIFO batch:31 | |
| [ 0.000000] random: get_random_bytes called from start_kernel+0x8c/0x49c with crng_init=0 | |
| [ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768 | |
| [ 0.000000] pcpu-alloc: [0] 0 | |
| [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 97440 | |
| [ 0.000000] Kernel command line: coherent_pool=1M 8250.nr_uarts=0 bcm2708_fb.fbwidth=1920 bcm2708_fb.fbheight=1080 bcm2708_fb.fbswap=1 smsc95xx.macaddr=m.m.m.m vc_mem.mem_base=0x1ec00000 vc_mem.mem_size=0x20000000 console=ttyS0,115200 console=tty1 root=PARTUUID=6c586e13-02 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait | |
| [ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes) | |
| [ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes) | |
| [ 0.000000] Memory: 369464K/393216K available (6973K kernel code, 635K rwdata, 2080K rodata, 464K init, 797K bss, 15560K reserved, 8192K cma-reserved) | |
| [ 0.000000] Virtual kernel memory layout: | |
| vector : 0xffff0000 - 0xffff1000 ( 4 kB) | |
| fixmap : 0xffc00000 - 0xfff00000 (3072 kB) | |
| vmalloc : 0xd8800000 - 0xff800000 ( 624 MB) | |
| lowmem : 0xc0000000 - 0xd8000000 ( 384 MB) | |
| modules : 0xbf000000 - 0xc0000000 ( 16 MB) | |
| .text : 0x(ptrval) - 0x(ptrval) (6975 kB) | |
| .init : 0x(ptrval) - 0x(ptrval) ( 464 kB) | |
| .data : 0x(ptrval) - 0x(ptrval) ( 636 kB) | |
| .bss : 0x(ptrval) - 0x(ptrval) ( 798 kB) | |
| [ 0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 | |
| [ 0.000000] ftrace: allocating 25197 entries in 74 pages | |
| [ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 | |
| [ 0.000031] sched_clock: 32 bits at 1000kHz, resolution 1000ns, wraps every 2147483647500ns | |
| [ 0.000094] clocksource: timer: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275 ns | |
| [ 0.000223] bcm2835: system timer (irq = 27) | |
| [ 0.000641] Console: colour dummy device 80x30 | |
| [ 0.001278] console [tty1] enabled | |
| [ 0.001360] Calibrating delay loop... 697.95 BogoMIPS (lpj=3489792) | |
| [ 0.060398] pid_max: default: 32768 minimum: 301 | |
| [ 0.060973] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes) | |
| [ 0.061034] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes) | |
| [ 0.062472] CPU: Testing write buffer coherency: ok | |
| [ 0.063872] Setting up static identity map for 0x8200 - 0x8238 | |
| [ 0.065350] devtmpfs: initialized | |
| [ 0.076008] VFP support v0.3: implementor 41 architecture 1 part 20 variant b rev 5 | |
| [ 0.076481] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns | |
| [ 0.076560] futex hash table entries: 256 (order: -1, 3072 bytes) | |
| [ 0.077945] pinctrl core: initialized pinctrl subsystem | |
| [ 0.079565] NET: Registered protocol family 16 | |
| [ 0.082814] DMA: preallocated 1024 KiB pool for atomic coherent allocations | |
| [ 0.089832] hw-breakpoint: found 6 breakpoint and 1 watchpoint registers. | |
| [ 0.089909] hw-breakpoint: maximum watchpoint size is 4 bytes. | |
| [ 0.090076] Serial: AMBA PL011 UART driver | |
| [ 0.093405] bcm2835-mbox 2000b880.mailbox: mailbox enabled | |
| [ 0.137434] bcm2835-dma 20007000.dma: DMA legacy API manager at (ptrval), dmachans=0x1 | |
| [ 0.140038] SCSI subsystem initialized | |
| [ 0.140357] usbcore: registered new interface driver usbfs | |
| [ 0.140512] usbcore: registered new interface driver hub | |
| [ 0.140772] usbcore: registered new device driver usb | |
| [ 0.161168] raspberrypi-firmware soc:firmware: Attached to firmware from 2019-09-24 17:37, variant start | |
| [ 0.171191] raspberrypi-firmware soc:firmware: Firmware hash is 6820edeee4ef3891b95fc01cf02a7abd7ca52f17 | |
| [ 0.183571] clocksource: Switched to clocksource timer | |
| [ 0.287986] VFS: Disk quotas dquot_6.6.0 | |
| [ 0.288173] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) | |
| [ 0.288544] FS-Cache: Loaded | |
| [ 0.288930] CacheFiles: Loaded | |
| [ 0.308390] NET: Registered protocol family 2 | |
| [ 0.309771] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 4096 bytes) | |
| [ 0.309895] TCP established hash table entries: 4096 (order: 2, 16384 bytes) | |
| [ 0.310010] TCP bind hash table entries: 4096 (order: 2, 16384 bytes) | |
| [ 0.310132] TCP: Hash tables configured (established 4096 bind 4096) | |
| [ 0.310324] UDP hash table entries: 256 (order: 0, 4096 bytes) | |
| [ 0.310394] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes) | |
| [ 0.310831] NET: Registered protocol family 1 | |
| [ 0.311980] RPC: Registered named UNIX socket transport module. | |
| [ 0.312043] RPC: Registered udp transport module. | |
| [ 0.312074] RPC: Registered tcp transport module. | |
| [ 0.312103] RPC: Registered tcp NFSv4.1 backchannel transport module. | |
| [ 0.314375] hw perfevents: no irqs for PMU, sampling events not supported | |
| [ 0.314501] hw perfevents: enabled with armv6_1176 PMU driver, 3 counters available | |
| [ 0.318641] Initialise system trusted keyrings | |
| [ 0.319107] workingset: timestamp_bits=14 max_order=17 bucket_order=3 | |
| [ 0.334283] FS-Cache: Netfs 'nfs' registered for caching | |
| [ 0.335664] NFS: Registering the id_resolver key type | |
| [ 0.335762] Key type id_resolver registered | |
| [ 0.335798] Key type id_legacy registered | |
| [ 0.335852] nfs4filelayout_init: NFSv4 File Layout Driver Registering... | |
| [ 0.341533] Key type asymmetric registered | |
| [ 0.341605] Asymmetric key parser 'x509' registered | |
| [ 0.341741] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250) | |
| [ 0.342266] io scheduler noop registered | |
| [ 0.342324] io scheduler deadline registered (default) | |
| [ 0.342960] io scheduler cfq registered | |
| [ 0.343011] io scheduler mq-deadline registered (default) | |
| [ 0.343047] io scheduler kyber registered | |
| [ 0.345906] bcm2708_fb soc:fb: FB found 1 display(s) | |
| [ 0.398717] Console: switching to colour frame buffer device 240x67 | |
| [ 0.438644] bcm2708_fb soc:fb: Registered framebuffer for display 0, size 1920x1080 | |
| [ 0.443344] bcm2835-rng 20104000.rng: hwrng registered | |
| [ 0.444265] vc-mem: phys_addr:0x00000000 mem_base=0x1ec00000 mem_size:0x20000000(512 MiB) | |
| [ 0.445944] vc-sm: Videocore shared memory driver | |
| [ 0.446981] gpiomem-bcm2835 20200000.gpiomem: Initialised: Registers at 0x20200000 | |
| [ 0.471169] brd: module loaded | |
| [ 0.487152] loop: module loaded | |
| [ 0.488383] Loading iSCSI transport class v2.0-870. | |
| [ 0.489742] usbcore: registered new interface driver smsc95xx | |
| [ 0.490033] dwc_otg: version 3.00a 10-AUG-2012 (platform bus) | |
| [ 0.518395] dwc_otg 20980000.usb: base=(ptrval) | |
| [ 0.719196] Core Release: 2.80a | |
| [ 0.719378] Setting default values for core params | |
| [ 0.719615] Finished setting default values for core params | |
| [ 0.920429] Using Buffer DMA mode | |
| [ 0.920622] Periodic Transfer Interrupt Enhancement - disabled | |
| [ 0.920855] Multiprocessor Interrupt Enhancement - disabled | |
| [ 0.921079] OTG VER PARAM: 0, OTG VER FLAG: 0 | |
| [ 0.921374] Dedicated Tx FIFOs mode | |
| [ 0.922503] WARN::dwc_otg_hcd_init:1045: FIQ DMA bounce buffers: virt = d7514000 dma = 0x57514000 len=9024 | |
| [ 0.922913] FIQ FSM acceleration enabled for : | |
| Non-periodic Split Transactions | |
| Periodic Split Transactions | |
| High-Speed Isochronous Endpoints | |
| Interrupt/Control Split Transaction hack enabled | |
| [ 0.923802] dwc_otg: Microframe scheduler enabled | |
| [ 0.924080] WARN::hcd_init_fiq:457: FIQ on core 0 | |
| [ 0.924309] WARN::hcd_init_fiq:458: FIQ ASM at c04fdd70 length 36 | |
| [ 0.924570] WARN::hcd_init_fiq:497: MPHI regs_base at d8810000 | |
| [ 0.924834] dwc_otg 20980000.usb: DWC OTG Controller | |
| [ 0.925110] dwc_otg 20980000.usb: new USB bus registered, assigned bus number 1 | |
| [ 0.925467] dwc_otg 20980000.usb: irq 56, io mem 0x00000000 | |
| [ 0.925745] Init: Port Power? op_state=1 | |
| [ 0.935828] Init: Power Port (0) | |
| [ 0.946280] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.19 | |
| [ 0.956410] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 | |
| [ 0.966560] usb usb1: Product: DWC OTG Controller | |
| [ 0.976508] usb usb1: Manufacturer: Linux 4.19.75+ dwc_otg_hcd | |
| [ 0.986572] usb usb1: SerialNumber: 20980000.usb | |
| [ 0.998158] hub 1-0:1.0: USB hub found | |
| [ 1.008538] hub 1-0:1.0: 1 port detected | |
| [ 1.019920] dwc_otg: FIQ enabled | |
| [ 1.019936] dwc_otg: NAK holdoff enabled | |
| [ 1.019945] dwc_otg: FIQ split-transaction FSM enabled | |
| [ 1.019967] Module dwc_common_port init | |
| [ 1.020622] usbcore: registered new interface driver usb-storage | |
| [ 1.031683] mousedev: PS/2 mouse device common for all mice | |
| [ 1.043672] bcm2835-wdt bcm2835-wdt: Broadcom BCM2835 watchdog timer | |
| [ 1.054398] bcm2835-cpufreq: min=700000 max=1000000 | |
| [ 1.065580] sdhci: Secure Digital Host Controller Interface driver | |
| [ 1.075770] sdhci: Copyright(c) Pierre Ossman | |
| [ 1.086520] mmc-bcm2835 20300000.mmcnr: could not get clk, deferring probe | |
| [ 1.097787] sdhost-bcm2835 20202000.mmc: could not get clk, deferring probe | |
| [ 1.108446] sdhci-pltfm: SDHCI platform and OF driver helper | |
| [ 1.119533] ledtrig-cpu: registered to indicate activity on CPUs | |
| [ 1.130470] hidraw: raw HID events driver (C) Jiri Kosina | |
| [ 1.141133] usbcore: registered new interface driver usbhid | |
| [ 1.151511] usbhid: USB HID core driver | |
| [ 1.162970] vchiq: vchiq_init_state: slot_zero = (ptrval), is_master = 0 | |
| [ 1.175922] [vc_sm_connected_init]: start | |
| [ 1.190411] [vc_sm_connected_init]: end - returning 0 | |
| [ 1.203119] Initializing XFRM netlink socket | |
| [ 1.213724] NET: Registered protocol family 17 | |
| [ 1.224123] Key type dns_resolver registered | |
| [ 1.236483] registered taskstats version 1 | |
| [ 1.246938] Loading compiled-in X.509 certificates | |
| [ 1.268825] uart-pl011 20201000.serial: cts_event_workaround enabled | |
| [ 1.279481] 20201000.serial: ttyAMA0 at MMIO 0x20201000 (irq = 81, base_baud = 0) is a PL011 rev2 | |
| [ 1.293255] mmc-bcm2835 20300000.mmcnr: mmc_debug:0 mmc_debug2:0 | |
| [ 1.303726] mmc-bcm2835 20300000.mmcnr: DMA channel allocated | |
| [ 1.344282] sdhost: log_buf @ (ptrval) (57513000) | |
| [ 1.390850] mmc1: queuing unknown CIS tuple 0x80 (2 bytes) | |
| [ 1.401231] mmc0: sdhost-bcm2835 loaded - DMA enabled (>1) | |
| [ 1.413461] of_cfs_init | |
| [ 1.444239] of_cfs_init: OK | |
| [ 1.455222] mmc1: queuing unknown CIS tuple 0x80 (3 bytes) | |
| [ 1.466133] Waiting for root device PARTUUID=6c586e13-02... | |
| [ 1.477644] random: fast init done | |
| [ 1.488416] mmc1: queuing unknown CIS tuple 0x80 (3 bytes) | |
| [ 1.501954] mmc1: queuing unknown CIS tuple 0x80 (7 bytes) | |
| [ 1.542017] mmc0: host does not support reading read-only switch, assuming write-enable | |
| [ 1.554347] mmc0: Problem switching card into high-speed mode! | |
| [ 1.565638] mmc0: new SDHC card at address 0001 | |
| [ 1.578647] mmcblk0: mmc0:0001 USD00 28.9 GiB | |
| [ 1.593339] mmcblk0: p1 p2 | |
| [ 1.659443] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null) | |
| [ 1.669926] VFS: Mounted root (ext4 filesystem) readonly on device 179:2. | |
| [ 1.699215] devtmpfs: mounted | |
| [ 1.717009] Freeing unused kernel memory: 464K | |
| [ 1.727166] This architecture does not have kernel memory protection. | |
| [ 1.737230] Run /sbin/init as init process | |
| [ 1.747820] mmc1: new high speed SDIO card at address 0001 | |
| [ 3.141156] systemd[1]: System time before build time, advancing clock. | |
| [ 3.436284] NET: Registered protocol family 10 | |
| [ 3.449272] Segment Routing with IPv6 | |
| [ 3.555230] systemd[1]: systemd 241 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid) | |
| [ 3.578951] systemd[1]: Detected architecture arm. | |
| [ 3.653676] systemd[1]: Set hostname to <raspberrypi>. | |
| [ 3.670939] systemd[1]: Failed to bump fs.file-max, ignoring: Invalid argument | |
| [ 5.869537] systemd[1]: File /lib/systemd/system/systemd-journald.service:12 configures an IP firewall (IPAddressDeny=any), but the local system does not support BPF/cgroup based firewalling. | |
| [ 5.881710] systemd[1]: Proceeding WITHOUT firewalling in effect! (This warning is only shown for the first loaded unit using IP firewalling.) | |
| [ 6.954799] random: systemd: uninitialized urandom read (16 bytes read) | |
| [ 6.993400] random: systemd: uninitialized urandom read (16 bytes read) | |
| [ 7.005817] systemd[1]: Reached target Swap. | |
| [ 7.095894] systemd[1]: Condition check resulted in Journal Audit Socket being skipped. | |
| [ 7.108561] random: systemd: uninitialized urandom read (16 bytes read) | |
| [ 7.122557] systemd[1]: Listening on Journal Socket (/dev/log). | |
| [ 7.165800] systemd[1]: Listening on Syslog Socket. | |
| [ 8.596502] systemd[1]: Starting Journal Service... | |
| [ 8.759043] systemd[1]: Mounted POSIX Message Queue File System. | |
| [ 8.871481] systemd[1]: Mounted RPC Pipe File System. | |
| [ 9.023997] systemd[1]: Started Create list of required static device nodes for the current kernel. | |
| [ 9.126128] fbtft: module is from the staging directory, the quality is unknown, you have been warned. | |
| [ 9.201306] flexfb: module is from the staging directory, the quality is unknown, you have been warned. | |
| [ 9.285383] fbtft_device: module is from the staging directory, the quality is unknown, you have been warned. | |
| [ 9.345620] spi spi0.0: spidev spi0.0 125000kHz 8 bits mode=0x00 | |
| [ 9.358830] spi spi0.1: spidev spi0.1 125000kHz 8 bits mode=0x00 | |
| [ 9.371774] bcm2708_fb soc:fb: soc:fb id=-1 pdata? no | |
| [ 9.384822] spi spi0.0: Deleting spi0.0 | |
| [ 9.404120] systemd[1]: Started Restore / save the current clock. | |
| [ 9.510331] systemd[1]: Mounted Kernel Debug File System. | |
| [ 9.730891] systemd[1]: Starting File System Check on Root Device... | |
| [ 10.431104] graphics fb1: flexfb frame buffer, 240x240, 112 KiB video memory, 4 KiB buffer memory, fps=100, spi0.0 at 40 MHz | |
| [ 10.505696] fbtft_device: GPIOS used by 'flexfb': | |
| [ 10.518442] fbtft_device: 'reset' = GPIO27 | |
| [ 10.530861] fbtft_device: 'dc' = GPIO25 | |
| [ 10.543192] fbtft_device: 'cs' = GPIO8 | |
| [ 10.555334] fbtft_device: 'led' = GPIO24 | |
| [ 10.567475] spi spi0.1: spidev spi0.1 125000kHz 8 bits mode=0x00 | |
| [ 10.579326] flexfb spi0.0: flexfb spi0.0 40000kHz 8 bits mode=0x00 | |
| [ 10.657220] systemd[1]: Started File System Check Daemon to report status. | |
| [ 11.110056] systemd[1]: Started Load Kernel Modules. | |
| [ 11.258939] systemd[1]: Started Journal Service. | |
| [ 12.738990] EXT4-fs (mmcblk0p2): re-mounted. Opts: (null) | |
| [ 13.538229] systemd-journald[89]: Received request to flush runtime journal from PID 1 | |
| [ 17.476764] vc_sm_cma: module is from the staging directory, the quality is unknown, you have been warned. | |
| [ 17.519550] bcm2835_vc_sm_cma_probe: Videocore shared memory driver | |
| [ 17.519582] [vc_sm_connected_init]: start | |
| [ 17.530021] media: Linux media interface: v0.10 | |
| [ 17.555137] [vc_sm_connected_init]: installed successfully | |
| [ 17.851131] videodev: Linux video capture interface: v2.00 | |
| [ 18.154178] bcm2835_mmal_vchiq: module is from the staging directory, the quality is unknown, you have been warned. | |
| [ 18.160977] bcm2835_mmal_vchiq: module is from the staging directory, the quality is unknown, you have been warned. | |
| [ 18.184681] bcm2835_v4l2: module is from the staging directory, the quality is unknown, you have been warned. | |
| [ 18.234052] bcm2835_codec: module is from the staging directory, the quality is unknown, you have been warned. | |
| [ 18.323881] bcm2835-codec bcm2835-codec: Device registered as /dev/video10 | |
| [ 18.323959] bcm2835-codec bcm2835-codec: Loaded V4L2 decode | |
| [ 18.336078] bcm2835-codec bcm2835-codec: Device registered as /dev/video11 | |
| [ 18.336157] bcm2835-codec bcm2835-codec: Loaded V4L2 encode | |
| [ 18.354501] bcm2835-codec bcm2835-codec: Device registered as /dev/video12 | |
| [ 18.354571] bcm2835-codec bcm2835-codec: Loaded V4L2 isp | |
| [ 18.894476] snd_bcm2835: module is from the staging directory, the quality is unknown, you have been warned. | |
| [ 19.031212] bcm2835_audio soc:audio: card created with 8 channels | |
| [ 20.322088] cfg80211: Loading compiled-in X.509 certificates for regulatory database | |
| [ 20.876923] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' | |
| [ 21.394310] brcmfmac: F1 signature read @0x18000000=0x1541a9a6 | |
| [ 21.414052] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43430-sdio for chip BCM43430/1 | |
| [ 21.414560] usbcore: registered new interface driver brcmfmac | |
| [ 21.717450] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43430-sdio for chip BCM43430/1 | |
| [ 21.717672] brcmfmac: brcmf_c_process_clm_blob: no clm_blob available (err=-2), device may have limited channels available | |
| [ 21.718815] brcmfmac: brcmf_c_preinit_dcmds: Firmware: BCM43430/1 wl0: Oct 23 2017 03:55:53 version 7.45.98.38 (r674442 CY) FWID 01-e58d219f | |
| [ 28.538981] random: crng init done | |
| [ 28.539012] random: 7 urandom warning(s) missed due to ratelimiting | |
| [ 29.345250] uart-pl011 20201000.serial: no DMA platform data | |
| [ 31.065540] 8021q: 802.1Q VLAN Support v1.8 | |
| [ 32.676122] Adding 102396k swap on /var/swap. Priority:-2 extents:1 across:102396k SSFS | |
| [ 33.098195] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready | |
| [ 33.098220] brcmfmac: power management disabled | |
| [ 34.624973] Bluetooth: Core ver 2.22 | |
| [ 34.625177] NET: Registered protocol family 31 | |
| [ 34.625188] Bluetooth: HCI device and connection manager initialized | |
| [ 34.625218] Bluetooth: HCI socket layer initialized | |
| [ 34.625233] Bluetooth: L2CAP socket layer initialized | |
| [ 34.625292] Bluetooth: SCO socket layer initialized | |
| [ 34.717669] Bluetooth: HCI UART driver ver 2.3 | |
| [ 34.717690] Bluetooth: HCI UART protocol H4 registered | |
| [ 34.722819] Bluetooth: HCI UART protocol Three-wire (H5) registered | |
| [ 34.723175] Bluetooth: HCI UART protocol Broadcom registered | |
| [ 34.779311] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready | |
| [ 36.043077] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 | |
| [ 36.043093] Bluetooth: BNEP filters: protocol multicast | |
| [ 36.043123] Bluetooth: BNEP socket layer initialized | |
| [ 1205.748374] Unable to handle kernel paging request at virtual address 00073808 | |
| [ 1205.754726] pgd = 8f216566 | |
| [ 1205.760721] [00073808] *pgd=00000000 | |
| [ 1205.766775] Internal error: Oops: 5 [#1] ARM | |
| [ 1205.772728] Modules linked in: bnep hci_uart btbcm serdev bluetooth ecdh_generic 8021q garp stp llc brcmfmac brcmutil sha256_generic cfg80211 raspberrypi_hwmon rfkill hwmon snd_bcm2835(C) snd_pcm snd_timer snd bcm2835_codec(C) bcm2835_v4l2(C) v4l2_mem2mem bcm2835_mmal_vchiq(C) v4l2_common videobuf2_dma_contig videobuf2_vmalloc videobuf2_memops videobuf2_v4l2 videobuf2_common videodev media vc_sm_cma(C) spidev fixed uio_pdrv_genirq uio fbtft_device(C) flexfb(C) fbtft(C) syscopyarea sysfillrect sysimgblt fb_sys_fops spi_bcm2835 ip_tables x_tables ipv6 | |
| [ 1205.793677] CPU: 0 PID: 830 Comm: ffmpeg Tainted: G C 4.19.75+ #1270 | |
| [ 1205.800868] Hardware name: BCM2835 | |
| [ 1205.807923] PC is at free_pcppages_bulk+0x390/0x560 | |
| [ 1205.815117] LR is at 0xd7e2d690 | |
| [ 1205.822145] pc : [<c010f2e8>] lr : [<d7e2d690>] psr: 60000093 | |
| [ 1205.829351] sp : d7153cb8 ip : c0a737e0 fp : d7153d04 | |
| [ 1205.836588] r10: 00000000 r9 : 00000000 r8 : c0a73730 | |
| [ 1205.843688] r7 : d7e2d690 r6 : ffffff7f r5 : 00000001 r4 : d7e2d720 | |
| [ 1205.850879] r3 : 00000034 r2 : d7e2d694 r1 : c0a737a0 r0 : 00073798 | |
| [ 1205.857922] Flags: nZCv IRQs off FIQs on Mode SVC_32 ISA ARM Segment user | |
| [ 1205.865085] Control: 00c5387d Table: 170fc008 DAC: 00000055 | |
| [ 1205.872146] Process ffmpeg (pid: 830, stack limit = 0x8f6c0d0c) | |
| [ 1205.879301] Stack: (0xd7153cb8 to 0xd7154000) | |
| [ 1205.886458] 3ca0: c0a73730 00000002 | |
| [ 1205.893638] 3cc0: 00000000 d7f81050 d7153cf4 d7e2d700 d7e34b94 beab55ca d7153d1c d7c73b3c | |
| [ 1205.900985] 3ce0: c0a07254 c0a73730 40000013 d7153d74 0000c1d8 d7153d70 d7153d2c d7153d08 | |
| [ 1205.908275] 3d00: c010f5e4 c010ef64 c00d45a4 c00d5558 00000000 d7e3de60 d7e63dbc 0000001b | |
| [ 1205.915711] 3d20: d7153d5c d7153d30 c01112c4 c010f544 beab55ca d7e85a28 00000400 0000001f | |
| [ 1205.923134] 3d40: ffffffff 00000400 60000013 d2d86ffc d7153dac d7153d60 c011b528 c01111a0 | |
| [ 1205.930692] 3d60: 00000001 00000002 c0a73730 00000000 d7153e04 d7e85a2c d7e52750 beab55ca | |
| [ 1205.938228] 3d80: d7153dfc d7e85a28 00000400 d2d86ffc c09e9028 d2d86000 00000400 d7153e9c | |
| [ 1205.945858] 3da0: d7153ddc d7153db0 c0154858 c011b1ac c011135c beab55ca 00000000 ac466000 | |
| [ 1205.953509] 3dc0: d7e85a28 ac467000 0e1ba34f ac600000 d7153e4c d7153de0 c0140744 c01547b4 | |
| [ 1205.961086] 3de0: c011b528 ac850fff d7153e0c d70feb10 ac851000 d516c1a0 d70feb14 00000001 | |
| [ 1205.968837] 3e00: d2c6ca20 00000000 00000000 00000000 ffffff99 00000000 00000000 beab55ca | |
| [ 1205.976596] 3e20: 20000013 d2c6ca20 ac851000 d7153e9c ac067000 00000000 d2c6ca20 d2c6c8a0 | |
| [ 1205.984440] 3e40: d7153e64 d7153e50 c01408fc c01402b8 00000000 c09e9028 d7153e94 d7153e68 | |
| [ 1205.992200] 3e60: c0140a6c c01408bc 00000000 c0112da4 d7153e94 d516c1a0 d2c6c9c0 d7153e9c | |
| [ 1206.000053] 3e80: ac067000 c09e9028 d7153f14 d7153e98 c0145590 c0140a14 000ac851 d516c1a0 | |
| [ 1206.007869] 3ea0: 00000000 d2c6ca20 ac067000 ac851000 bf000000 00000000 00000400 00000400 | |
| [ 1206.015840] 3ec0: d2d86000 00000000 ac851000 c01459e0 d7153f14 d7153ee0 c01459e0 c0144fe8 | |
| [ 1206.023753] 3ee0: c0146e7c beab55ca d2c6ca20 d2c6ca20 ac851000 d516c1a0 ac067000 d2c6c8a0 | |
| [ 1206.031806] 3f00: d516c1a4 d2c6ca20 d7153f54 d7153f18 c0147a28 c0145510 ac851000 c006b4e0 | |
| [ 1206.039836] 3f20: 00000001 d2c6c8a8 000161ce d7153f5c c09e9028 d516c1d8 d516c1a0 ac067000 | |
| [ 1206.047988] 3f40: 007ea000 00000000 d7153f8c d7153f58 c01481b4 c01477fc d7153f7c d7153f5c | |
| [ 1206.056111] 3f60: d7153f5c beab55ca 007ea000 ac067000 00000000 0000005b c00091a4 d7152000 | |
| [ 1206.064367] 3f80: d7153fa4 d7153f90 c0148218 c014814c b6f2d968 b6f2d968 00000000 d7153fa8 | |
| [ 1206.072614] 3fa0: c0009000 c01481f8 b6f2d968 b6f2d968 ac067000 007ea000 b549027c 01909000 | |
| [ 1206.081011] 3fc0: b6f2d968 b6f2d968 00000000 0000005b 00000104 00000000 00000000 0201c8c0 | |
| [ 1206.089372] 3fe0: b5490258 befa17cc b5554f90 b5419d9c 60000010 ac067000 00000000 00000000 | |
| [ 1206.097876] [<c010f2e8>] (free_pcppages_bulk) from [<c010f5e4>] (free_unref_page_commit+0xac/0xd0) | |
| [ 1206.106433] [<c010f5e4>] (free_unref_page_commit) from [<c01112c4>] (free_unref_page_list+0x130/0x208) | |
| [ 1206.115152] [<c01112c4>] (free_unref_page_list) from [<c011b528>] (release_pages+0x388/0x46c) | |
| [ 1206.123844] [<c011b528>] (release_pages) from [<c0154858>] (free_pages_and_swap_cache+0xb0/0x104) | |
| [ 1206.132722] [<c0154858>] (free_pages_and_swap_cache) from [<c0140744>] (unmap_page_range+0x498/0x604) | |
| [ 1206.141606] [<c0140744>] (unmap_page_range) from [<c01408fc>] (unmap_single_vma+0x4c/0x54) | |
| [ 1206.150647] [<c01408fc>] (unmap_single_vma) from [<c0140a6c>] (unmap_vmas+0x64/0x78) | |
| [ 1206.159604] [<c0140a6c>] (unmap_vmas) from [<c0145590>] (unmap_region+0x8c/0x130) | |
| [ 1206.168689] [<c0145590>] (unmap_region) from [<c0147a28>] (do_munmap+0x238/0x364) | |
| [ 1206.177724] [<c0147a28>] (do_munmap) from [<c01481b4>] (vm_munmap+0x74/0xac) | |
| [ 1206.186856] [<c01481b4>] (vm_munmap) from [<c0148218>] (sys_munmap+0x2c/0x30) | |
| [ 1206.195849] [<c0148218>] (sys_munmap) from [<c0009000>] (ret_fast_syscall+0x0/0x28) | |
| [ 1206.204876] Exception stack(0xd7153fa8 to 0xd7153ff0) | |
| [ 1206.213952] 3fa0: b6f2d968 b6f2d968 ac067000 007ea000 b549027c 01909000 | |
| [ 1206.223131] 3fc0: b6f2d968 b6f2d968 00000000 0000005b 00000104 00000000 00000000 0201c8c0 | |
| [ 1206.232378] 3fe0: b5490258 befa17cc b5554f90 b5419d9c | |
| [ 1206.241473] Code: e98e1002 e7882003 e3a03034 e0208093 (e5903070) | |
| [ 1206.250732] ---[ end trace 11a1d82d1a1cdfec ]--- |
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment