Skip to content

Instantly share code, notes, and snippets.

@sidwarkd

sidwarkd/edison_pins.json

Last active August 29, 2015 14:13
Show Gist options
  • Star 0 You must be signed in to star a gist
  • Fork 0 You must be signed in to fork a gist
  • Save sidwarkd/88d79cde921609e7037e to your computer and use it in GitHub Desktop.
Save sidwarkd/88d79cde921609e7037e to your computer and use it in GitHub Desktop.
Download ZIP
Descriptive JSON of Edison Mini Breakout Pins
Raw
edison_pins.json
[
{
"jumper": 17,
"pin": 1,
"name": "GP182_PWM2",
"description": "GPIO capable of PWM output.",
"tags": ["gpio", "pwm"]
},
{
"jumper": 17,
"pin": 2,
"name": "NC",
"description": "No connect",
"tags": ["nc"]
},
{
"jumper": 17,
"pin": 3,
"name": "NC",
"description": "No connect",
"tags": ["nc"]
},
{
"jumper": 17,
"pin": 4,
"name": "VIN",
"description": "7 to 15V input",
"tags": ["power"]
},
{
"jumper": 17,
"pin": 5,
"name": "GP135/UART2_TX",
"description": "GPIO, UART2 transmit output.",
"tags": ["gpio", "uart", "uart2"]
},
{
"jumper": 17,
"pin": 6,
"name": "RCVR_MODE",
"description": "Used for firmware recovery",
"tags": ["misc"]
},
{
"jumper": 17,
"pin": 7,
"name": "GP27/I2C6_SCL",
"description": "GPIO or I2C6 clock line",
"tags": ["gpio", "i2c", "i2c6"]
},
{
"jumper": 17,
"pin": 8,
"name": "GP20/I2C1_SDA",
"description": "GPIO or I2C1 data line",
"tags": ["gpio", "i2c", "i2c1"]
},
{
"jumper": 17,
"pin": 9,
"name": "GP28/I2C6_SDA",
"description": "GPIO or I2C6 data line",
"tags": ["gpio", "i2c", "i2c6"]
},
{
"jumper": 17,
"pin": 10,
"name": "GP111/SSP5_FS1",
"description": "GPIO or SPI chip select 1",
"tags": ["gpio", "spi"]
},
{
"jumper": 17,
"pin": 11,
"name": "GP109/SSP5_CLK",
"description": "GPIO or SPI clock line",
"tags": ["gpio", "spi"]
},
{
"jumper": 17,
"pin": 12,
"name": "GP115/SSP5_TXD",
"description": "GPIO or SPI MOSI",
"tags": ["gpio", "spi"]
},
{
"jumper": 17,
"pin": 13,
"name": "OSC_CLK_OUT_0",
"description": "High speed clock output",
"tags": ["clock"]
},
{
"jumper": 17,
"pin": 14,
"name": "GP128/UART1_CTS",
"description": "GPIO or UART1 clear to send input",
"tags": ["gpio", "uart", "uart1"]
},
{
"jumper": 18,
"pin": 1,
"name": "GP13_PWM1",
"description": "GPIO capable of PWM output",
"tags": ["gpio", "pwm"]
},
{
"jumper": 18,
"pin": 2,
"name": "GP165",
"description": "GPIO",
"tags": ["gpio"]
},
{
"jumper": 18,
"pin": 3,
"name": "GPI_PWRBTN_N",
"description": "Power button input",
"tags": ["power"]
},
{
"jumper": 18,
"pin": 4,
"name": "MSIC_SLP_CLK2",
"description": "32 kHz sleep clock",
"tags": ["clock"]
},
{
"jumper": 18,
"pin": 5,
"name": "V_VBAT_BKUP",
"description": "RTC backup battery input",
"tags": ["power", "battery"]
},
{
"jumper": 18,
"pin": 6,
"name": "GP19/I2C1_SCL",
"description": "GPIO or I2C1 clock line",
"tags": ["gpio", "i2c", "i2c1"]
},
{
"jumper": 18,
"pin": 7,
"name": "GP12_PWM0",
"description": "GPIO capable of PWM output",
"tags": ["gpio", "pwm"]
},
{
"jumper": 18,
"pin": 8,
"name": "GP183_PWM3",
"description": "GPIO capable of PWM output",
"tags": ["gpio", "pwm"]
},
{
"jumper": 18,
"pin": 9,
"name": "NC",
"description": "No connect",
"tags": ["nc"]
},
{
"jumper": 18,
"pin": 10,
"name": "GP110/SSP5_FS0",
"description": "GPIO or SPI chip select 0",
"tags": ["gpio", "spi"]
},
{
"jumper": 18,
"pin": 11,
"name": "GP114/SSP5_RX",
"description": "GPIO or SPI MISO",
"tags": ["gpio", "spi"]
},
{
"jumper": 18,
"pin": 12,
"name": "GP129/UART1_RTS",
"description": "GPIO or UART1 ready to send output",
"tags": ["gpio", "uart", "uart1"]
},
{
"jumper": 18,
"pin": 13,
"name": "GP130/UART1_RX",
"description": "GPIO or UART1 receive line",
"tags": ["gpio", "uart", "uart1"]
},
{
"jumper": 18,
"pin": 14,
"name": "FW_RCVR",
"description": "Firmware recovery. Active high on boot",
"tags": ["misc"]
},
{
"jumper": 19,
"pin": 1,
"name": "NC",
"description": "No connect",
"tags": ["nc"]
},
{
"jumper": 19,
"pin": 2,
"name": "V_V1P80",
"description": "System 1.8V I/O output power",
"tags": ["power"]
},
{
"jumper": 19,
"pin": 3,
"name": "GND",
"description": "Ground",
"tags": ["power", "ground"]
},
{
"jumper": 19,
"pin": 4,
"name": "GP44/ALS_INT_N",
"description": "GPIO or ALS interrupt input",
"tags": ["gpio"]
},
{
"jumper": 19,
"pin": 5,
"name": "GP46/ACCELEROMETER_INT_1",
"description": "GPIO or accelerometer interrupt input",
"tags": ["gpio", "accelerometer"]
},
{
"jumper": 19,
"pin": 6,
"name": "GP48/GYRO_DRDY",
"description": "GPIO or gyro data ready input",
"tags": ["gpio", "gyro"]
},
{
"jumper": 19,
"pin": 7,
"name": "RESET_OUT#",
"description": "System reset out low",
"tags": ["misc", "reset"]
},
{
"jumper": 19,
"pin": 8,
"name": "GP131/UART1_TX",
"description": "GPIO or UART1 transmit line",
"tags": ["gpio", "uart", "uart1"]
},
{
"jumper": 19,
"pin": 9,
"name": "GP14/AUDIO_CODEC_INT",
"description": "GPIO or audio codec interrupt",
"tags": ["gpio", "audio"]
},
{
"jumper": 19,
"pin": 10,
"name": "GP40/SSP2_CLK",
"description": "GPIO or SSP2 clock output",
"tags": ["gpio", "i2s"]
},
{
"jumper": 19,
"pin": 11,
"name": "GP43/SSP2_TXD",
"description": "GPIO or SSP2 data output",
"tags": ["gpio", "i2s"]
},
{
"jumper": 19,
"pin": 12,
"name": "GP77/SD_CDN",
"description": "GPIO or SD card detect (active low)",
"tags": ["gpio", "sd"]
},
{
"jumper": 19,
"pin": 13,
"name": "GP82/SD_DAT2",
"description": "GPIO or SD data 2",
"tags": ["gpio", "sd"]
},
{
"jumper": 19,
"pin": 14,
"name": "GP83/SD_DAT3",
"description": "GPIO or SD data 3",
"tags": ["gpio", "sd"]
},
{
"jumper": 20,
"pin": 1,
"name": "V_VSYS",
"description": "System input power",
"tags": ["power"]
},
{
"jumper": 20,
"pin": 2,
"name": "V_V3P30",
"description": "System 3.3V output",
"tags": ["power"]
},
{
"jumper": 20,
"pin": 3,
"name": "GP134/UART2_RX",
"description": "GPIO or UART2 receive",
"tags": ["gpio", "uart", "uart2"]
},
{
"jumper": 20,
"pin": 4,
"name": "GP45/COMPASS_DRDY",
"description": "GPIO or compass data ready input",
"tags": ["gpio", "compass"]
},
{
"jumper": 20,
"pin": 5,
"name": "GP47/ACCELEROMETER_INT_2",
"description": "GPIO or accelerometer interrupt 2",
"tags": ["gpio", "accelerometer"]
},
{
"jumper": 20,
"pin": 6,
"name": "GP49/GYRO_INT",
"description": "GPIO or gyro interrupt",
"tags": ["gpio", "gyro"]
},
{
"jumper": 20,
"pin": 7,
"name": "GP15",
"description": "GPIO",
"tags": ["gpio"]
},
{
"jumper": 20,
"pin": 8,
"name": "GP84/SD_CLK_FB",
"description": "GPIO or SD clock feedback",
"tags": ["gpio", "sd"]
},
{
"jumper": 20,
"pin": 9,
"name": "GP42/SSP2_RXD",
"description": "GPIO or SSP2 receive data",
"tags": ["gpio", "i2s"]
},
{
"jumper": 20,
"pin": 10,
"name": "GP41/SSP2_FS",
"description": "GPIO or SSP2 frame sync output",
"tags": ["gpio", "i2s"]
},
{
"jumper": 20,
"pin": 11,
"name": "GP78/SD_CLK",
"description": "GPIO or SD clock",
"tags": ["gpio", "sd"]
},
{
"jumper": 20,
"pin": 12,
"name": "GP79/SD_CMD",
"description": "GPIO or SD command",
"tags": ["gpio", "sd"]
},
{
"jumper": 20,
"pin": 13,
"name": "GP80/SD_DAT0",
"description": "GPIO or SD data 0",
"tags": ["gpio", "sd"]
},
{
"jumper": 20,
"pin": 14,
"name": "GP81/SD_DAT1",
"description": "GPIO or SD data 1",
"tags": ["gpio", "sd"]
}
]
Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment