BBU.txt

jcigar@db:~/ > sudo cciss_vol_status -V /dev/ciss0
Controller: Smart Array P400
  Board ID: 0x3234103c
  Logical drives: 2
  Running firmware: 5.20
  ROM firmware: 5.20
/dev/ciss0: (Smart Array P400) RAID 1(1+0) Volume 0 status: OK. 
/dev/ciss0: (Smart Array P400) RAID 1(1+0) Volume 1 status: OK. 
  Physical drives: 8
         connector 1I box 1 bay 8                 HP      DG072BB975                           3NP3CFJJ00009912QBXZ     HPDC OK
         connector 1I box 1 bay 7                 HP      DG072BB975                           3NP3C61400009911L1ZF     HPDC OK
         connector 1I box 1 bay 6                 HP      DG072BB975                           3NP3BFJH00009912Q0EL     HPDC OK
         connector 1I box 1 bay 5                 HP      DG072BB975                           3NP3CFQP00009912QF5M     HPDC OK
         connector 2I box 1 bay 4                 HP      DG072BB975                           3NP3CG0T00009912Q0Q9     HPDC OK
         connector 2I box 1 bay 3                 HP      DG072BB975                           3NP3C6YW00009912R6JY     HPDC OK
         connector 2I box 1 bay 2                 HP      EH0146FARWD                                      PLY31XSE     HPDB OK
         connector 2I box 1 bay 1                 HP      DG072BB975                           3NP3CG9T00009912PR7H     HPDC OK
/dev/ciss0(Smart Array P400:0): Non-Volatile Cache status:
                   Cache configured: Yes
                  Read cache memory: 116 MiB
                 Write cache memory: 348 MiB
                Write cache enabled: No
   Write cache temporarily disabled
           Temporary disable condition. Posted write operations have
been disabled due to the fact that less than 75% of the
battery packs are at the sufficient voltage level.