Skip to content

Instantly share code, notes, and snippets.

@silent27121984
Created Feb 9, 2021
Embed
What would you like to do?
and for the last file:
[ 0.000000] Booting Linux on physical CPU 0x0
[ 0.000000] Linux version 4.14.117-perf+ (root@ubuntu-13-23) (clang version 8.0.12 for Android NDK) #1 SMP PREEMPT Tue Dec 1 19:57:11 CST 2020
[ 0.000000] Boot CPU: AArch64 Processor [51df805e]
[ 0.000000] Machine: Qualcomm Technologies, Inc. ATOLL-AB PM6150 wcd937x Audio Codec IDP
[ 0.000000] earlycon: msm_geni_serial0 at MMIO 0x0000000000a88000 (options '')
[ 0.000000] bootconsole [msm_geni_serial0] enabled
[ 0.000000] OF: reserved mem: OVERLAP DETECTED!
[ 0.000000] disp_rdump_region@9c000000 (0x000000009c000000--0x000000009d700000) overlaps with cont_splash_region@9c000000 (0x000000009c000000--0x000000009d700000)
[ 0.000000] Reserved memory: created CMA memory pool at 0x00000000f9800000, size 100 MiB
[ 0.000000] OF: reserved mem: initialized node secure_display_region, compatible id shared-dma-pool
[ 0.000000] Reserved memory: created CMA memory pool at 0x000000027dc00000, size 36 MiB
[ 0.000000] OF: reserved mem: initialized node mem_dump_region, compatible id shared-dma-pool
[ 0.000000] Reserved memory: created CMA memory pool at 0x00000000f8800000, size 16 MiB
[ 0.000000] OF: reserved mem: initialized node qseecom_ta_region, compatible id shared-dma-pool
[ 0.000000] Reserved memory: created CMA memory pool at 0x00000000f6800000, size 32 MiB
[ 0.000000] OF: reserved mem: initialized node linux,cma, compatible id shared-dma-pool
[ 0.000000] Reserved memory: created CMA memory pool at 0x00000000f6000000, size 8 MiB
[ 0.000000] OF: reserved mem: initialized node adsp_region, compatible id shared-dma-pool
[ 0.000000] Removed memory: created DMA memory pool at 0x0000000080000000, size 6 MiB
[ 0.000000] OF: reserved mem: initialized node hyp_region@80000000, compatible id removed-dma-pool
[ 0.000000] Removed memory: created DMA memory pool at 0x0000000080700000, size 1 MiB
[ 0.000000] OF: reserved mem: initialized node xbl_aop_mem@80700000, compatible id removed-dma-pool
[ 0.000000] Removed memory: created DMA memory pool at 0x00000000808ff000, size 0 MiB
[ 0.000000] OF: reserved mem: initialized node sec_apps_region@808ff000, compatible id removed-dma-pool
[ 0.000000] Removed memory: created DMA memory pool at 0x0000000080900000, size 2 MiB
[ 0.000000] OF: reserved mem: initialized node smem@80900000, compatible id removed-dma-pool
[ 0.000000] Removed memory: created DMA memory pool at 0x0000000080b00000, size 103 MiB
[ 0.000000] OF: reserved mem: initialized node removed_region@80b00000, compatible id removed-dma-pool
[ 0.000000] Removed memory: created DMA memory pool at 0x000000008e400000, size 5 MiB
[ 0.000000] OF: reserved mem: initialized node camera_region@8e400000, compatible id removed-dma-pool
[ 0.000000] Removed memory: created DMA memory pool at 0x000000008e900000, size 5 MiB
[ 0.000000] OF: reserved mem: initialized node pil_npu_region@8e900000, compatible id removed-dma-pool
[ 0.000000] Removed memory: created DMA memory pool at 0x000000008ee00000, size 5 MiB
[ 0.000000] OF: reserved mem: initialized node pil_video_region@8ee00000, compatible id removed-dma-pool
[ 0.000000] Removed memory: created DMA memory pool at 0x000000008f300000, size 30 MiB
[ 0.000000] OF: reserved mem: initialized node cdsp_regions@8f300000, compatible id removed-dma-pool
[ 0.000000] Removed memory: created DMA memory pool at 0x0000000091100000, size 40 MiB
[ 0.000000] OF: reserved mem: initialized node pil_adsp_region@91100000, compatible id removed-dma-pool
[ 0.000000] Removed memory: created DMA memory pool at 0x0000000093900000, size 2 MiB
[ 0.000000] OF: reserved mem: initialized node wlan_fw_region@93900000, compatible id removed-dma-pool
[ 0.000000] Removed memory: created DMA memory pool at 0x0000000093b00000, size 0 MiB
[ 0.000000] OF: reserved mem: initialized node ipa_fw_region@93b00000, compatible id removed-dma-pool
[ 0.000000] Removed memory: created DMA memory pool at 0x0000000093b10000, size 0 MiB
[ 0.000000] OF: reserved mem: initialized node ipa_gsi_region@93b10000, compatible id removed-dma-pool
[ 0.000000] Removed memory: created DMA memory pool at 0x0000000093b15000, size 0 MiB
[ 0.000000] OF: reserved mem: initialized node gpu_region@93b15000, compatible id removed-dma-pool
[ 0.000000] Removed memory: created DMA memory pool at 0x0000000093c00000, size 132 MiB
[ 0.000000] OF: reserved mem: initialized node modem_region@93c00000, compatible id removed-dma-pool
[ 0.000000] Reserved memory: created DMA memory pool at 0x000000009e000000, size 20 MiB
[ 0.000000] OF: reserved mem: initialized node qseecom_region@9e000000, compatible id shared-dma-pool
[ 0.000000] Removed memory: created DMA memory pool at 0x000000009f400000, size 12 MiB
[ 0.000000] OF: reserved mem: initialized node cdsp_sec_regions@0x9f400000, compatible id removed-dma-pool
[ 0.000000] On node 0 totalpages: 1986472
[ 0.000000] DMA zone: 6463 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 413608 pages, LIFO batch:31
[ 0.000000] Normal zone: 24576 pages used for memmap
[ 0.000000] Normal zone: 1572864 pages, LIFO batch:31
[ 0.000000] psci: probing for conduit method from DT.
[ 0.000000] psci: PSCIv1.1 detected in firmware.
[ 0.000000] psci: Using standard PSCI v0.2 function IDs
[ 0.000000] psci: MIGRATE_INFO_TYPE not supported.
[ 0.000000] psci: SMC Calling Convention v1.1
[ 0.000000] random: fast init done
[ 0.000000] random: get_random_bytes called from start_kernel+0x94/0x548 with crng_init=1
[ 0.000000] percpu: Embedded 52 pages/cpu s175512 r8192 d29288 u212992
[ 0.000000] pcpu-alloc: s175512 r8192 d29288 u212992 alloc=52*4096
[ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [0] 4 [0] 5 [0] 6 [0] 7
[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 1955433
[ 0.000000] Kernel command line: rcupdate.rcu_expedited=1 rcu_nocbs=0-7 console=ttyMSM0,115200n8 androidboot.hardware=qcom androidboot.console=ttyMSM0 androidboot.memcg=1 lpm_levels.sleep_disabled=1 video=vfb:640x400,bpp=32,memsize=3072000 msm_rtb.filter=0x237 service_locator.enable=1 swiotlb=1 androidboot.usbcontroller=a600000.dwc3 earlycon=msm_geni_serial,0xa88000 loop.max_part=7 cgroup.memory=nokmem,nosocket androidboot.selinux=permissive androidboot.init_fatal_reboot_target=recovery buildvariant=eng lk_version=V1.0 oppo_ftm_mode=ftmrecovery androidboot.startupmode=usb_charger androidboot.mode=recovery printk.disable_uart=1 short_c_feature_sw_status=0 phx_rus_conf.main_on=1 phx_rus_conf.recovery_method=2 phx_rus_conf.kernel_time=240 phx_rus_conf.android_time=250 smooth_soc_switch=0 simcardnum.doublesim=1 androidboot.verifiedbootstate=orange androidboot.realmebootstate=orange androidboot.keymaster=1 androidboot.bootdevice=1d84000.ufshc androidboot.boot_devices=soc/1d84000.ufshc andro
[ 0.000000] [OPPO_CHG][oppo_short_c_feature_sw_status_init]short_c_feature_sw_status[0]
[ 0.000000] hang_oppo_main_on 1
[ 0.000000] hang_oppo_recovery_method 2
[ 0.000000] phx_hlos_wd_pet_time 240
[ 0.000000] kernel serialno 5e426737
[ 0.000000] log_buf_len individual max cpu contribution: 131072 bytes
[ 0.000000] log_buf_len total cpu_extra contributions: 917504 bytes
[ 0.000000] log_buf_len min size: 131072 bytes
[ 0.000000] log_buf_len: 1048576 bytes
[ 0.000000] early log buf free: 123552(94%)
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[ 0.000000] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.000000] software IO TLB: mapped [mem 0xfffbf000-0xfffff000] (0MB)
[ 0.000000] Memory: 7513700K/7945888K available (17918K kernel code, 3584K rwdata, 6892K rodata, 4096K init, 5972K bss, 235580K reserved, 196608K cma-reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[ 0.000000] [PHOENIX] phx_klog_bootstage: KERNEL_MM_INIT_DONE
[ 0.000000]
[ 0.000000] **********************************************************
[ 0.000000] ** NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE **
[ 0.000000] ** **
[ 0.000000] ** trace_printk() being used. Allocating extra memory. **
[ 0.000000] ** **
[ 0.000000] ** This means that this is a DEBUG kernel and it is **
[ 0.000000] ** unsafe for production use. **
[ 0.000000] ** **
[ 0.000000] ** If you see this message and you are not debugging **
[ 0.000000] ** the kernel, report this immediately to your vendor! **
[ 0.000000] ** **
[ 0.000000] ** NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE **
[ 0.000000] **********************************************************
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] All grace periods are expedited (rcu_expedited).
[ 0.000000] Tasks RCU enabled.
[ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
[ 0.000000] GICv3: no VLPI support, no direct LPI support
[ 0.000000] Offload RCU callbacks from CPUs: 0-7.
[ 0.000000] arch_timer: cp15 and mmio timer(s) running at 19.20MHz (virt/virt).
[ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x46d987e47, max_idle_ns: 440795202767 ns
[ 0.000004] sched_clock: 56 bits at 19MHz, resolution 52ns, wraps every 4398046511078ns
[ 0.000016] clocksource: Switched to clocksource arch_sys_counter
[ 0.001823] [PHOENIX] phx_klog_bootstage: KERNEL_LOCAL_IRQ_ENABLE
[ 0.001881] Console: colour dummy device 80x25
[ 0.001898] Calibrating delay loop (skipped), value calculated using timer frequency.. 38.40 BogoMIPS (lpj=76800)
[ 0.001907] pid_max: default: 32768 minimum: 301
[ 0.001997] Security Framework initialized
[ 0.002007] SELinux: Initializing.
[ 0.002060] SELinux: Starting in permissive mode
[ 0.002104] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.002121] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.002599] [PHOENIX] phx_klog_bootstage: KERNEL_DELAYACCT_INIT_DONE
[ 0.008405] ASID allocator initialised with 32768 entries
[ 0.008480] NOHZ: local_softirq_pending 02
[ 0.010517] Hierarchical SRCU implementation.
[ 0.015054] MSM Memory Dump base table set up
[ 0.015073] MSM Memory Dump apps data table set up
[ 0.015080] BOOTPROF: 15.077395: ON
[ 0.017542] smp: Bringing up secondary CPUs ...
[ 0.027456] CPU1: Booted secondary processor [51df805e]
[ 0.037461] CPU2: Booted secondary processor [51df805e]
[ 0.047533] CPU3: Booted secondary processor [51df805e]
[ 0.057687] CPU4: Booted secondary processor [51df805e]
[ 0.067917] CPU5: Booted secondary processor [51df805e]
[ 0.078918] CPU features: enabling workaround for Mismatched cache type
[ 0.078923] CPU features: enabling workaround for ARM erratum 1188873
[ 0.078934] CPU features: Unsupported CPU feature variation detected.
[ 0.078968] arch_timer: Enabling local workaround for ARM erratum 1188873
[ 0.078981] arch_timer: CPU6: Trapping CNTVCT access
[ 0.078988] CPU6: Booted secondary processor [51ff804f]
[ 0.089547] arch_timer: Enabling local workaround for ARM erratum 1188873
[ 0.089562] arch_timer: CPU7: Trapping CNTVCT access
[ 0.089569] CPU7: Booted secondary processor [51ff804f]
[ 0.089723] smp: Brought up 1 node, 8 CPUs
[ 0.089754] SMP: Total of 8 processors activated.
[ 0.089759] CPU features: detected feature: GIC system register CPU interface
[ 0.089762] CPU features: detected feature: Privileged Access Never
[ 0.089766] CPU features: detected feature: User Access Override
[ 0.089770] CPU features: detected feature: 32-bit EL0 Support
[ 0.089774] CPU features: detected feature: Kernel page table isolation (KPTI)
[ 0.089779] CPU features: detected: Hardware dirty bit management
[ 0.089782] CPU features: detected feature: Speculative Store Bypassing Safe (SSBS)
[ 0.133658] CPU: All CPU(s) started at EL1
[ 0.133701] alternatives: patching kernel code
[ 0.135237] scm_enable_mem_protection: SCM call failed
[ 0.179242] [PHOENIX] phx_klog_bootstage: KERNEL_DRIVER_INIT_DONE
[ 0.181963] Registered cp15_barrier emulation handler
[ 0.181980] Registered setend emulation handler
[ 0.182281] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[ 0.182295] futex hash table entries: 2048 (order: 6, 262144 bytes)
[ 0.184864] pinctrl core: initialized pinctrl subsystem
[ 0.184968] oppo_devinfo_init call
[ 0.185342] NET: Registered protocol family 16
[ 0.186507] schedtune: configured to support 8 boost groups
[ 0.187140] cpuidle: using governor menu
[ 0.187157] cpuidle: using governor qcom
[ 0.187218] NET: Registered protocol family 42
[ 0.190168] vdso: 2 pages (1 code @ (ptrval), 1 data @ (ptrval))
[ 0.190176] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
[ 0.190896] DMA: preallocated 256 KiB pool for atomic allocations
[ 0.191249] boot_mode_init: parse boot_mode
[ 0.191267] androidboot.mode= recovery
[ 0.191284] board_ftm_mode_init ftm_mode=2
[ 0.191299] parse poweron reason usb_charger i = 11
[ 0.191803] exit: IPA_USB init success!
[ 0.191830] [PHOENIX] phoenix_hlos_watchdog_init: phoenix hlos watchdog: on
[ 0.195829] pstore: using zlib compression
[ 0.196389] console [pstore-1] enabled
[ 0.196443] pstore: Registered ramoops as persistent store backend
[ 0.196450] ramoops: attached 0x400000@0xba400000, ecc: 0/0
[ 0.199374] msm-dcc 10a2000.dcc_v2: DCC list passed 3
[ 0.199680] msm-dcc 10a2000.dcc_v2: All values written to enable
[ 0.200911] unable to find DT imem DLOAD mode node
[ 0.201524] unable to find DT imem EDLOAD mode node
[ 0.201904] platform 82200000.qseecom: assigned reserved memory node qseecom_region@9e000000
[ 0.202591] msm_watchdog 17c10000.qcom,wdt: wdog absent resource not present
[ 0.203418] msm_watchdog 17c10000.qcom,wdt: MSM Watchdog Initialized
[ 0.203934] platform 4080000.qcom,mss: assigned reserved memory node modem_region@93c00000
[ 0.203999] platform 9800000.qcom,npu: assigned reserved memory node pil_npu_region@8e900000
[ 0.204124] platform 8300000.qcom,turing: assigned reserved memory node cdsp_regions@8f300000
[ 0.204225] platform soc:qcom,msm-adsprpc-mem: assigned reserved memory node adsp_region
[ 0.204366] platform 62400000.qcom,lpass: assigned reserved memory node pil_adsp_region@91100000
[ 0.204703] platform soc:mem_dump: assigned reserved memory node mem_dump_region
[ 0.218026] sps:sps is ready.
[ 0.218059] platform soc:qcom,smem: assigned reserved memory node smem@80900000
[ 0.220191] spmi spmi-0: PMIC arbiter version v5 (0x50000000)
[ 0.220557] platform soc:qcom,ipa_fws: assigned reserved memory node ipa_fw_region@93b00000
[ 0.223830] platform aae0000.qcom,venus: assigned reserved memory node pil_video_region@8ee00000
[ 0.225676] LCDB: qpnp_lcdb_regulator_probe: Failed to parse dt rc=-517
[ 0.231048] atoll-pinctrl 3400000.pinctrl: invalid resource
[ 0.255095] oppo_devinfo_probe call
[ 0.255117] start
[ 0.255135] oppo_sensor_parse_dts [size = 2]
[ 0.255141] oppo_sensor_parse_dts [ 185]
[ 0.255146] oppo_sensor_parse_dts [ 15]
[ 0.255159] ProjectInfoCDTType=48, smem_size=48
[ 0.255166] KE Project:132785, Operator:179, Modem:13, PCB:PVT
[ 0.255173] OCP: 0 0x0 0 0x0
[ 0.255178] engVersion=0
[ 0.255184] oppo_sensor_parse_dts [ 1102 1 2]
[ 0.255190] oppo_sensor_parse_dts [ 00 0 0]
[ 0.255196] oppo_sensor_parse_dts [1 1 93 5 2 2 0]
[ 0.255203] oppo_devinfo_probe success
[ 0.266085] gpu_cx_gdsc: supplied by pm6150l_s1_level
[ 0.267355] clk: add_opp: Set OPP pair (300000000 Hz, 588000 uv) on cpu0
[ 0.267527] clk: add_opp: Set OPP pair (1804800000 Hz, 836000 uv) on cpu0
[ 0.267558] clk: add_opp: Set OPP pair (300000000 Hz, 588000 uv) on cpu1
[ 0.267728] clk: add_opp: Set OPP pair (1804800000 Hz, 836000 uv) on cpu1
[ 0.267757] clk: add_opp: Set OPP pair (300000000 Hz, 588000 uv) on cpu2
[ 0.267923] clk: add_opp: Set OPP pair (1804800000 Hz, 836000 uv) on cpu2
[ 0.267952] clk: add_opp: Set OPP pair (300000000 Hz, 588000 uv) on cpu3
[ 0.268144] clk: add_opp: Set OPP pair (1804800000 Hz, 836000 uv) on cpu3
[ 0.268177] clk: add_opp: Set OPP pair (300000000 Hz, 588000 uv) on cpu4
[ 0.268340] clk: add_opp: Set OPP pair (1804800000 Hz, 836000 uv) on cpu4
[ 0.268376] clk: add_opp: Set OPP pair (300000000 Hz, 588000 uv) on cpu5
[ 0.268536] clk: add_opp: Set OPP pair (1804800000 Hz, 836000 uv) on cpu5
[ 0.268577] clk: add_opp: Set OPP pair (652800000 Hz, 596000 uv) on cpu6
[ 0.268787] clk: add_opp: Set OPP pair (2323200000 Hz, 888000 uv) on cpu6
[ 0.268817] clk: add_opp: Set OPP pair (652800000 Hz, 596000 uv) on cpu7
[ 0.269039] clk: add_opp: Set OPP pair (2323200000 Hz, 888000 uv) on cpu7
[ 0.269201] clk: add_opp: Set OPP pair (300000000 Hz, 572000 uv) on soc:qcom,cpu0-cpu-l3-lat
[ 0.269207] clk: add_opp: Set OPP pair (300000000 Hz, 572000 uv) on soc:qcom,cpu6-cpu-l3-lat
[ 0.269213] clk: add_opp: Set OPP pair (300000000 Hz, 572000 uv) on soc:qcom,cdsp-cdsp-l3-lat
[ 0.269741] clk: add_opp: Set OPP pair (1459200000 Hz, 776000 uv) on soc:qcom,cpu0-cpu-l3-lat
[ 0.269747] clk: add_opp: Set OPP pair (1459200000 Hz, 776000 uv) on soc:qcom,cpu6-cpu-l3-lat
[ 0.269753] clk: add_opp: Set OPP pair (1459200000 Hz, 776000 uv) on soc:qcom,cdsp-cdsp-l3-lat
[ 0.270029] UNITY cpufreq init.
[ 0.270260] sched-energy: Sched-energy-costs installed from DT
[ 0.270949] cpufreq: driver osm-cpufreq up and running
[ 0.270957] clk: clk_cpu_osm_driver_probe: OSM CPUFreq driver inited
[ 0.272140] qmp-aop-clk soc:qcom,aopclk: Registered clocks with AOP
[ 0.273287] clk-rpmh soc:qcom,rpmh: Registered RPMh clocks
[ 0.274364] gpu_cc_gmu_clk_src: set OPP pair(19200000 Hz: 49 uV) on 506a000.qcom,gmu
[ 0.274377] gpu_cc_gmu_clk_src: set OPP pair(200000000 Hz: 49 uV) on 506a000.qcom,gmu
[ 0.274421] gpu_cc_gx_gfx3d_clk_src: set OPP pair(180000000 Hz: 49 uV) on 5000000.qcom,kgsl-3d0
[ 0.274483] gpu_cc_gx_gfx3d_clk_src: set OPP pair(700000000 Hz: 385 uV) on 5000000.qcom,kgsl-3d0
[ 0.274507] gpu_cc_gx_gfx3d_clk_src: set OPP pair(825000000 Hz: 417 uV) on 5000000.qcom,kgsl-3d0
[ 0.274518] gpu_cc-sdmmagpie 5090000.qcom,gpucc: Registered GPU CC clocks
[ 0.276147] atoll-camcc ad00000.qcom,camcc: Registered Camera CC clocks
[ 0.276759] atoll-dispcc af00000.qcom,dispcc: Registered Display CC clocks
[ 0.280001] atoll-gcc 100000.qcom,gcc: Registered GCC clocks
[ 0.280939] atoll-npucc 9980000.qcom,npucc: Registered NPU CC clocks
[ 0.281348] atoll-videocc ab00000.qcom,videocc: Registered Video CC clocks
[ 0.283014] KPI: Bootloader start count = 108443
[ 0.283018] KPI: Bootloader end count = 146070
[ 0.283021] KPI: Bootloader display count = 2400115450
[ 0.283023] KPI: Bootloader load kernel count = 1714810797
[ 0.283026] KPI: Kernel MPM timestamp = 164145
[ 0.283028] KPI: Kernel MPM Clock frequency = 32768
[ 0.283037] socinfo_print: v0.15, id=443, ver=1.1, raw_id=329, raw_ver=1, hw_plat=34, hw_plat_ver=65536
[ 0.283037] accessory_chip=0, hw_plat_subtype=1, pmic_model=65576, pmic_die_revision=131072 foundry_id=3 serial_number=1581410103 num_pmics=2 chip_family=0x67 raw_device_family=0x6 raw_device_number=0xe nproduct_id=0x416 num_clusters=0x1 ncluster_array_offset=0xb0 num_defective_parts=0xc ndefective_parts_array_offset=0xb4 nmodem_supported=0xff
[ 0.283095] Minidump: Enabled with max number of regions 200
[ 0.283138] msm_bus_fabric_rpmh_init_driver
[ 0.283229] msm_bus: Probe started
[ 0.283477] msm_bus_device 16e0000.ad-hoc-bus: Bus type is missing
[ 0.283485] msm_bus_device 16e0000.ad-hoc-bus: Bus type is missing
[ 0.283500] msm_bus_device 16e0000.ad-hoc-bus: Bus type is missing
[ 0.283513] msm_bus_device 16e0000.ad-hoc-bus: Bus type is missing
[ 0.283524] msm_bus_device 16e0000.ad-hoc-bus: Bus type is missing
[ 0.284144] msm_bus: DT Parsing complete
[ 0.286214] msm_bus_fab_init_noc_ops: Invalid Bus type
[ 0.286230] msm_bus_fab_init_noc_ops: Invalid Bus type
[ 0.286260] msm_bus_fab_init_noc_ops: Invalid Bus type
[ 0.286296] msm_bus_fab_init_noc_ops: Invalid Bus type
[ 0.286322] msm_bus_fab_init_noc_ops: Invalid Bus type
[ 0.291905] arm-smmu 5040000.arm,smmu-kgsl: non-coherent table walk
[ 0.291913] arm-smmu 5040000.arm,smmu-kgsl: (IDR0.CTTW overridden by FW configuration)
[ 0.291916] arm-smmu 5040000.arm,smmu-kgsl: stream matching with 5 register groups
[ 0.293282] register_client_adhoc:find path.src 161 dest 627
[ 0.293360] register_client_adhoc:Client handle 1 apps_smmu
[ 0.293461] arm-smmu 15000000.apps-smmu: non-coherent table walk
[ 0.293465] arm-smmu 15000000.apps-smmu: (IDR0.CTTW overridden by FW configuration)
[ 0.293468] arm-smmu 15000000.apps-smmu: stream matching with 71 register groups
[ 0.294041] register_client_adhoc:find path.src 161 dest 627
[ 0.294101] register_client_adhoc:Client handle 2 apps_smmu
[ 0.294173] register_client_adhoc:find path.src 161 dest 627
[ 0.294229] register_client_adhoc:Client handle 3 apps_smmu
[ 0.294315] register_client_adhoc:find path.src 22 dest 773
[ 0.294345] register_client_adhoc:Client handle 4 mnoc_hf_0_tbu
[ 0.294417] register_client_adhoc:find path.src 137 dest 772
[ 0.294446] register_client_adhoc:Client handle 5 mnoc_sf_0_tbu
[ 0.294510] register_client_adhoc:find path.src 161 dest 627
[ 0.294569] register_client_adhoc:Client handle 6 apps_smmu
[ 0.294623] register_client_adhoc:find path.src 154 dest 10076
[ 0.294643] register_client_adhoc:Client handle 7 apps_smmu
[ 0.294968] vgaarb: loaded
[ 0.295087] qcom,qpnp-misc c440000.qcom,spmi:qcom,pm6150@0:qcom,misc@900: probe successful
[ 0.295336] SCSI subsystem initialized
[ 0.295377] usbcore: registered new interface driver usbfs
[ 0.295385] usbcore: registered new interface driver hub
[ 0.295471] usbcore: registered new device driver usb
[ 0.295639] usb_phy_generic soc:usb_nop_phy: soc:usb_nop_phy supply vcc not found, using dummy regulator
[ 0.295835] qcom,qpnp-power-on c440000.qcom,spmi:qcom,pm6150@0:qcom,power-on@800: PMIC@SID0 Power-on reason: Triggered from Hard Reset and 'cold' boot
[ 0.295859] qcom,qpnp-power-on c440000.qcom,spmi:qcom,pm6150@0:qcom,power-on@800: PMIC@SID0: Power-off reason: Triggered from PS_HOLD (PS_HOLD/MSM Controlled Shutdown)
[ 0.296010] input: qpnp_pon as /devices/platform/soc/c440000.qcom,spmi/spmi-0/spmi0-00/c440000.qcom,spmi:qcom,pm6150@0:qcom,power-on@800/input/input0
[ 0.296167] qcom,qpnp-power-on c440000.qcom,spmi:qcom,pm6150@0:qcom,power-on@800: probe keycode = 116, key_st = 0x0
[ 0.296249] qcom,qpnp-power-on c440000.qcom,spmi:qcom,pm6150l@4:qcom,power-on@800: PMIC@SID4 Power-on reason: Triggered from PON1 (Secondary PMIC) and 'cold' boot
[ 0.296272] qcom,qpnp-power-on c440000.qcom,spmi:qcom,pm6150l@4:qcom,power-on@800: PMIC@SID4: Power-off reason: Triggered from SOFT (Software)
[ 0.296299] qcom,qpnp-power-on c440000.qcom,spmi:qcom,pm6150l@4:qcom,power-on@800: probe keycode = 116, key_st = 0x0
[ 0.296428] media: Linux media interface: v0.10
[ 0.296437] Linux video capture interface: v2.00
[ 0.296451] pps_core: LinuxPPS API ver. 1 registered
[ 0.296453] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 0.296457] PTP clock support registered
[ 0.296461] [OPPO_CHG][oppo_short_ic_subsys_init] init start
[ 0.296469] [OPPO_CHG][oppo_short_ic_subsys_init] Success to register oppo_short_ic i2c driver.
[ 0.296471] [OPPO_CHG][n76e_subsys_init] init start
[ 0.296475] [OPPO_CHG][n76e_subsys_init] Success to register n76e i2c driver.
[ 0.296478] [OPPO_CHG][stm8s_subsys_init] init start
[ 0.296482] [OPPO_CHG][stm8s_subsys_init] Success to register stm8s i2c driver.
[ 0.296484] [OPPO_CHG][rk826_subsys_init] init start
[ 0.296489] [OPPO_CHG][rk826_subsys_init] Success to register rk826 i2c driver.
[ 0.296494] [OPPO_CHG][adapter_ic_init] success
[ 0.299661] EDAC MC: Ver: 3.0.0
[ 0.300376] platform soc:qcom,ion:qcom,ion-heap@27: assigned reserved memory node qseecom_region@9e000000
[ 0.300406] platform soc:qcom,ion:qcom,ion-heap@19: assigned reserved memory node qseecom_ta_region
[ 0.300454] platform soc:qcom,ion:qcom,ion-heap@10: assigned reserved memory node secure_display_region
[ 0.300524] ION heap system created
[ 0.300643] ION heap qsecom created at 0x000000009e000000 with size 1400000
[ 0.300646] ION heap qsecom_ta created at 0x00000000f8800000 with size 1000000
[ 0.300648] ION heap secure_heap created
[ 0.300652] ION heap secure_display created at 0x00000000f9800000 with size 6400000
[ 0.305374] platform soc:qcom,ion:qcom,ion-heap@14: ion_secure_carveout: creating heap@0x9f400000, size 0xc00000
[ 0.305378] ION heap secure_carveout created
[ 0.306140] iommu: Adding device 8c0000.qcom,qupv3_0_geni_se:qcom,iommu_qupv3_0_geni_se_cb to group 0
[ 0.306316] iommu: Adding device ac0000.qcom,qupv3_1_geni_se:qcom,iommu_qupv3_1_geni_se_cb to group 1
[ 0.306568] PMIC@SID0: PM6150 v2.0 options: 0, 0, 0, 0
[ 0.306662] PMIC@SID4: PM8150A v2.0 options: 0, 0, 0, 0
[ 0.307253] register_client_adhoc:find path.src 90 dest 512
[ 0.307407] register_client_adhoc:find path.src 90 dest 585
[ 0.307462] register_client_adhoc:find path.src 1 dest 676
[ 0.307552] register_client_adhoc:find path.src 143 dest 777
[ 0.307579] register_client_adhoc:Client handle 8 ipa
[ 0.309718] ipa ipa3_smp2p_probe:7992 fail to get smp2p clk resp bit -517
[ 0.310143] iommu: Adding device soc:ipa_smmu_ap to group 2
[ 0.310328] iommu: Adding device soc:ipa_smmu_wlan to group 3
[ 0.310466] iommu: Adding device soc:ipa_smmu_uc to group 4
[ 0.311694] ipa ipa3_smp2p_probe:7992 fail to get smp2p clk resp bit -517
[ 0.313401] Advanced Linux Sound Architecture Driver Initialized.
[ 0.313807] Bluetooth: Core ver 2.22
[ 0.313846] NET: Registered protocol family 31
[ 0.313851] Bluetooth: HCI device and connection manager initialized
[ 0.313862] Bluetooth: HCI socket layer initialized
[ 0.313870] Bluetooth: L2CAP socket layer initialized
[ 0.313894] Bluetooth: SCO socket layer initialized
[ 0.314454] NetLabel: Initializing
[ 0.314459] NetLabel: domain hash size = 128
[ 0.314463] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
[ 0.314507] NetLabel: unlabeled traffic allowed by default
[ 0.314562] pcie:pcie_init.
[ 0.321212] register_client_adhoc:find path.src 22 dest 512
[ 0.321487] register_client_adhoc:Client handle 9 bus-proxy-client
[ 0.322789] LCDB: qpnp_lcdb_regulator_probe: LCDB module successfully registered! lcdb_en=0 ldo_voltage=4000mV ncp_voltage=4000mV bst_voltage=4700mV
[ 0.322853] sched-energy energy-costs: cpu=0 eff=1024 [freq=300000 cap=78 power_d0=10] -> [freq=1804800 cap=469 power_d0=119]
[ 0.322857] sched-energy energy-costs: cpu=1 eff=1024 [freq=300000 cap=78 power_d0=10] -> [freq=1804800 cap=469 power_d0=119]
[ 0.322861] sched-energy energy-costs: cpu=2 eff=1024 [freq=300000 cap=78 power_d0=10] -> [freq=1804800 cap=469 power_d0=119]
[ 0.322865] sched-energy energy-costs: cpu=3 eff=1024 [freq=300000 cap=78 power_d0=10] -> [freq=1804800 cap=469 power_d0=119]
[ 0.322870] sched-energy energy-costs: cpu=4 eff=1024 [freq=300000 cap=78 power_d0=10] -> [freq=1804800 cap=469 power_d0=119]
[ 0.322873] sched-energy energy-costs: cpu=5 eff=1024 [freq=300000 cap=78 power_d0=10] -> [freq=1804800 cap=469 power_d0=119]
[ 0.322878] sched-energy energy-costs: cpu=6 eff=1740 [freq=652800 cap=288 power_d0=242] -> [freq=2400000 cap=1024 power_d0=2568]
[ 0.322883] sched-energy energy-costs: cpu=7 eff=1740 [freq=652800 cap=288 power_d0=242] -> [freq=2400000 cap=1024 power_d0=2568]
[ 0.322886] sched-energy energy-costs: Sched-energy-costs capacity updated
[ 0.322979] gpu_gx_gdsc: supplied by pm6150_s2_level
[ 0.323098] ipa ipa3_smp2p_probe:7992 fail to get smp2p clk resp bit -517
[ 0.323389] clocksource: Switched to clocksource arch_sys_counter
[ 0.339406] VFS: Disk quotas dquot_6.6.0
[ 0.339437] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.340422] atoll-debugcc soc:qcom,cc-debug: Registered debug mux successfully
[ 0.340863] mdss_pll_probe: MDSS pll label = MDSS DSI 0 PLL
[ 0.340912] mdss_pll ae94a00.qcom,mdss_dsi_pll: Failed to create debugfs directory
[ 0.340916] mdss_pll ae94a00.qcom,mdss_dsi_pll: Failed to create debugfs directory
[ 0.340920] mdss_pll ae94a00.qcom,mdss_dsi_pll: Failed to create debugfs directory
[ 0.340924] mdss_pll ae94a00.qcom,mdss_dsi_pll: Failed to create debugfs directory
[ 0.340927] mdss_pll ae94a00.qcom,mdss_dsi_pll: Failed to create debugfs directory
[ 0.340930] mdss_pll ae94a00.qcom,mdss_dsi_pll: Failed to create debugfs directory
[ 0.341375] dsi_pll_clock_register_10nm: Registered DSI PLL ndx=0, clocks successfully
[ 0.341506] mdss_pll_probe: MDSS pll label = MDSS DP PLL
[ 0.342897] NET: Registered protocol family 2
[ 0.343066] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.343245] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.343628] TCP: Hash tables configured (established 65536 bind 65536)
[ 0.343686] UDP hash table entries: 4096 (order: 5, 131072 bytes)
[ 0.343751] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
[ 0.343940] NET: Registered protocol family 1
[ 0.343952] PCI: CLS 0 bytes, default 128
[ 0.344089] ipa ipa3_smp2p_probe:7992 fail to get smp2p clk resp bit -517
[ 0.344236] Trying to unpack rootfs image as initramfs...
[ 0.576302] Freeing initrd memory: 17376K
[ 0.577199] hw perfevents: enabled with armv8_pmuv3 PMU driver, 7 counters available
[ 0.581220] create_panic_flush_control
[ 0.581697] audit: initializing netlink subsys (disabled)
[ 0.581803] audit: type=2000 audit(0.579:1): state=initialized audit_enabled=0 res=1
[ 0.581989] workingset: timestamp_bits=45 max_order=21 bucket_order=0
[ 0.582693] resmap_account_init create resmap_account passed
[ 0.583126] Registering sdcardfs 0.1
[ 0.583196] fuse init (API version 7.26)
[ 0.583337] exFAT: Version 1.2.9
[ 0.583352] SELinux: Registering netfilter hooks
[ 0.583493] pfk_ext4 [pfk_ext4_init]: PFK EXT4 inited successfully
[ 0.583496] pfk_f2fs [pfk_f2fs_init]: PFK F2FS inited successfully
[ 0.583499] pfk [pfk_init]: Driver initialized successfully
[ 0.587094] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 240)
[ 0.587098] io scheduler noop registered
[ 0.587101] io scheduler deadline registered
[ 0.587141] io scheduler cfq registered (default)
[ 0.587144] io scheduler mq-deadline registered
[ 0.587146] io scheduler kyber registered
[ 0.593818] iommu: Adding device 800000.qcom,gpi-dma to group 5
[ 0.594621] iommu: Adding device a00000.qcom,gpi-dma to group 6
[ 0.596898] iommu: Adding device 18800000.qcom,icnss to group 7
[ 0.596924] icnss: Recursive recovery allowed for WLAN
[ 0.601499] icnss 18800000.qcom,icnss: for wcss_msa0 segments only will be dumped.
[ 0.601594] icnss: Platform driver probed successfully
[ 0.602614] memshare_child soc:qcom,memshare:qcom,client_1: for memshare_GPS segments only will be dumped.
[ 0.602657] memshare_child soc:qcom,memshare:qcom,client_2: for memshare_FTM segments only will be dumped.
[ 0.602676] memshare_child soc:qcom,memshare:qcom,client_3: for memshare_DIAG segments only will be dumped.
[ 0.602824] register_client_adhoc:find path.src 129 dest 512
[ 0.602876] register_client_adhoc:Client handle 10 pil-modem
[ 0.602884] register_client_adhoc:find path.src 125 dest 512
[ 0.603020] register_client_adhoc:Client handle 11 scm_pas
[ 0.603265] minidump-id not found for npu
[ 0.603273] subsys-pil-tz 9800000.qcom,npu: for npu segments only will be dumped.
[ 0.603287] subsys-pil-tz 9800000.qcom,npu: for md_npu segments only will be dumped.
[ 0.603318] subsys-restart: __get_smem_state(): Could not get smem-states qcom,force-stop
[ 0.603512] register_client_adhoc:find path.src 154 dest 10076
[ 0.603533] register_client_adhoc:Client handle 12 pil-cdsp
[ 0.603941] minidump-id not found for ipa_fws
[ 0.603948] subsys-pil-tz soc:qcom,ipa_fws: for ipa_fws segments only will be dumped.
[ 0.603960] subsys-pil-tz soc:qcom,ipa_fws: for md_ipa_fws segments only will be dumped.
[ 0.604103] register_client_adhoc:find path.src 63 dest 512
[ 0.604204] register_client_adhoc:Client handle 13 pil-venus
[ 0.604208] minidump-id not found for venus
[ 0.604215] subsys-pil-tz aae0000.qcom,venus: for venus segments only will be dumped.
[ 0.604229] subsys-pil-tz aae0000.qcom,venus: for md_venus segments only will be dumped.
[ 0.604339] minidump-id not found for a615_zap
[ 0.604343] subsys-pil-tz soc:qcom,kgsl-hyp: for a615_zap segments only will be dumped.
[ 0.604355] subsys-pil-tz soc:qcom,kgsl-hyp: for md_a615_zap segments only will be dumped.
[ 0.606148] smp2p_sleepstate soc:qcom,smp2p_sleepstate: got smp2p-sleepstate-in irq 423
[ 0.607394] oppo_shutdown_detect: shutdown_detect:register shutdown_detect interface
[ 0.608115] register_client_adhoc:find path.src 183 dest 816
[ 0.608174] register_client_adhoc:find path.src 151 dest 512
[ 0.608305] register_client_adhoc:Client handle 14 8c0000.qcom,qupv3_0_geni_se
[ 0.608595] msm_geni_serial 88c000.qcom,qup_uart: Wakeup byte 0xfd
[ 0.608708] msm_geni_serial 88c000.qcom,qup_uart: Serial port0 added.FifoSize 64 is_console0
[ 0.609102] 88c000.qcom,qup_uart: ttyHS0 at MMIO 0x88c000 (irq = 201, base_baud = 0) is a MSM
[ 0.609233] msm_geni_serial_probe: console start get pinctrl
[ 0.609243] msm_geni_serial a88000.qcom,qup_uart: boot with console false
[ 0.609422] msm_geni_serial_init: Driver initialized
[ 0.609537] register_client_adhoc:find path.src 1 dest 618
[ 0.609657] register_client_adhoc:Client handle 15 msm-rng-noc
[ 0.611613] random: crng init done
[ 0.612492] diag: MUX: unable to register pcie operations for proc: 0, err: -22
[ 0.612496] diag: MUX: unable to register PCIe operations, continuing with USB registrations for proc: 0, err: -22
[ 0.616675] register_client_adhoc:find path.src 20003 dest 20515
[ 0.616736] register_client_adhoc:Client handle 16 disp_rsc_mnoc
[ 0.616749] register_client_adhoc:find path.src 20001 dest 20513
[ 0.616781] register_client_adhoc:Client handle 17 disp_rsc_llcc
[ 0.616791] register_client_adhoc:find path.src 20000 dest 20512
[ 0.616822] register_client_adhoc:Client handle 18 disp_rsc_ebi
[ 0.617007] [sde_rsc_hw:rsc_hw_init_v3:520]: sde rsc init successfully done
[ 0.617041] [sde_rsc:sde_rsc_probe:1884]: sde rsc index:0 probed successfully
[ 0.617470] dsi_phy ae94400.qcom,mdss_dsi_phy0: ae94400.qcom,mdss_dsi_phy0 supply gdsc not found, using dummy regulator
[ 0.617502] msm-dsi-phy:[dsi_phy_driver_probe] Probe successful for dsi-phy-0
[ 0.617819] AXI: get_pdata(): Error: Client name not found
[ 0.617823] AXI: msm_bus_cl_get_pdata(): client has to provide missing entry for successful registration
[ 0.617825] dsi-ctrl:[dsi_ctrl_dev_probe] Probe successful for dsi-ctrl-0
[ 0.618041] OF: graph: no port node found in /soc/qcom,dsi-display
[ 0.618065] msm-dsi-panel:[dsi_panel_parse_panel_mode:2072] dsi_panel_parse_panel_mode: panel operating mode switch feature enabled
[ 0.618079] msm-dsi-panel:[dsi_panel_parse_qsync_caps:1755] [s6e8fc1x0 amoled fhd+ video mode dsi samsung panel] qsync min fps not defined rc:-22
[ 0.618082] msm-dsi-panel:[dsi_panel_get:3882] failed to parse qsync features, rc=-22
[ 0.618098] msm-dsi-panel:[dsi_panel_parse_reset_sequence:2512] RESET SEQ LENGTH = 8
[ 0.618102] msm-dsi-panel:[dsi_panel_parse_oppo_config:2590] aod ramless mode: true
[ 0.618115] msm-dsi-panel:[dsi_panel_parse_bl_config:2855] [s6e8fc1x0 amoled fhd+ video mode dsi samsung panel] backlight map size: 0
[ 0.618120] msm-dsi-panel:[dsi_panel_parse_misc_features:2562] dsi_panel_parse_misc_features: ulps feature disabled
[ 0.618124] msm-dsi-panel:[dsi_panel_parse_misc_features:2568] dsi_panel_parse_misc_features: ulps during suspend feature disabled
[ 0.618863] iommu: Adding device ae00000.qcom,mdss_mdp to group 8
[ 0.619156] register_client_adhoc:find path.src 1 dest 590
[ 0.619281] register_client_adhoc:Client handle 19 mdss_reg
[ 0.619296] register_client_adhoc:find path.src 22 dest 512
[ 0.619384] register_client_adhoc:Client handle 20 mdss_sde
[ 0.619440] [drm:sde_dbg_init:5189] evtlog_status: enable:3, panic:1, dump:2
[ 0.619458] msm_drm ae00000.qcom,mdss_mdp: bound soc:qcom,wb-display@0 (ops sde_wb_comp_ops)
[ 0.619586] msm-dsi-display:[dsi_display_bind] Successfully bind display panel 'dsi_s6e8fc1x01_samsung_amoled_video_display'
[ 0.619735] genirq: irq_chip msmgpio-dc did not update eff. affinity mask of irq 234
[ 0.619753] msm-dsi-display:[dsi_display_feature_create_sysfs] LCD_CABC:dsi_display_feature_create_sysfs success
[ 0.619759] msm_drm ae00000.qcom,mdss_mdp: bound soc:qcom,dsi-display (ops dsi_display_comp_ops)
[ 0.619765] msm_drm ae00000.qcom,mdss_mdp: bound af20000.qcom,sde_rscc (ops sde_rsc_comp_ops)
[ 0.619781] [drm] mapped mdp address space @ffffff8010d00000
[ 0.619825] msm_drm ae00000.qcom,mdss_mdp: failed to get memory resource: vbif_nrt_phys
[ 0.619842] [drm:_sde_kms_get_splash_data:3289] splash mem num_regions:1
[ 0.619851] [drm:_sde_kms_get_splash_data:3324] splash mem for disp:1 add:9c000000 size:1700000
[ 0.620331] [drm:sde_kms_hw_init:3470] sde hardware revision:0x60020000
[ 0.620823] [drm] Created domain mdp_ns [80000000,80000000] secure=0
[ 0.621621] iommu: Adding device ae00000.qcom,mdss_mdp:qcom,smmu_sde_sec_cb to group 9
[ 0.621634] [drm] probing device qcom,smmu_sde_sec
[ 0.621638] [drm] Created domain mdp_s [80000000,80000000] secure=1
[ 0.622997] [drm:reg_dmav1_init_sspp_op_v4] *ERROR* invalid feature map 12 for feature 31
[ 0.623390] [drm:reg_dmav1_init_sspp_op_v4] *ERROR* invalid feature map 12 for feature 31
[ 0.624127] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 0.624130] [drm] No driver support for vblank timestamp query.
[ 0.624456] [drm] Initialized msm_drm 1.2.0 20130625 for ae00000.qcom,mdss_mdp on minor 0
[ 0.624499] msm-dsi-panel:[dsi_panel_parse_topology:3380] default topology: lm: 1 comp_enc:0 intf: 1
[ 0.624623] msm-dsi-panel:[dsi_panel_parse_partial_update_caps:3470] partial update disabled as the property is not set
[ 0.624638] msm-dsi-panel:[dsi_panel_parse_topology:3380] default topology: lm: 1 comp_enc:0 intf: 1
[ 0.624708] msm-dsi-panel:[dsi_panel_parse_partial_update_caps:3470] partial update disabled as the property is not set
[ 0.624793] dsi-ctrl:[_dsi_ctrl_setup_isr] [DSI_0] IRQ 424 registered
[ 0.627368] iommu: Adding device 506a000.qcom,gmu:gmu_user to group 10
[ 0.627939] iommu: Adding device 506a000.qcom,gmu:gmu_kernel to group 11
[ 0.629047] register_client_adhoc:find path.src 26 dest 512
[ 0.629133] register_client_adhoc:Client handle 21 grp3d
[ 0.629143] register_client_adhoc:find path.src 26 dest 10036
[ 0.629209] register_client_adhoc:Client handle 22 cnoc
[ 0.629213] query_client_usecase_all: query_start
[ 0.629231] query_client_usecase_all: query_start
[ 0.630503] iommu: Adding device 5040000.qcom,kgsl-iommu:gfx3d_user to group 12
[ 0.630699] iommu: Adding device 5040000.qcom,kgsl-iommu:gfx3d_secure to group 13
[ 0.654781] brd: module loaded
[ 0.657845] loop: module loaded
[ 0.657919] zram: Added device: zram0
[ 0.658559] QSEECOM: qseecom_probe: qseecom.qsee_version = 0x1400000
[ 0.658570] QSEECOM: qseecom_retrieve_ce_data: Device does not support PFE
[ 0.658573] QSEECOM: qseecom_probe: no-clock-support=0x1
[ 0.658575] QSEECOM: qseecom_probe: qseecom.qsee_reentrancy_support = 2
[ 0.658608] QSEECOM: qseecom_probe: qseecom.whitelist_support = 1
[ 0.659586] iommu: Adding device 1de0000.qcedev to group 14
[ 0.659657] register_client_adhoc:find path.src 125 dest 512
[ 0.659820] register_client_adhoc:Client handle 23 qcedev-noc
[ 0.660011] QCE50: __qce_get_device_tree_data: CE operating frequency is not defined, setting to default 100MHZ
[ 0.660733] qce 1de0000.qcedev: QTI Crypto 5.5.1 device found @0x1de0000
[ 0.660845] sps:BAM 0x0000000001dc4000 is registered.
[ 0.660933] sps:BAM 0x0000000001dc4000 (va:0xffffff8010f80000) enabled: ver:0x27, number of pipes:16
[ 0.661024] QCE50: qce_sps_init: QTI MSM CE-BAM at 0x0000000001dc4000 irq 9
[ 0.661375] iommu: Adding device 1de0000.qcedev:qcom_cedev_ns_cb to group 15
[ 0.661698] qcedev_setup_context_bank Attached 1de0000.qcedev:qcom_cedev_ns_cb and create mapping
[ 0.661702] qcedev_setup_context_bank Context Bank name:ns_context, is_secure:0, start_addr:0x60000000
[ 0.661795] iommu: Adding device 1de0000.qcedev:qcom_cedev_s_cb to group 16
[ 0.662622] qcedev_setup_context_bank Attached 1de0000.qcedev:qcom_cedev_s_cb and create mapping
[ 0.662626] qcedev_setup_context_bank Context Bank name:secure_context, is_secure:1, start_addr:0xa0000000
[ 0.663218] iommu: Adding device 1de0000.qcrypto to group 17
[ 0.663265] register_client_adhoc:find path.src 125 dest 512
[ 0.663421] register_client_adhoc:Client handle 24 qcrypto-noc
[ 0.663585] QCE50: __qce_get_device_tree_data: CE operating frequency is not defined, setting to default 100MHZ
[ 0.664247] qcrypto 1de0000.qcrypto: QTI Crypto 5.5.1 device found @0x1de0000
[ 0.664391] QCE50: qce_sps_init: QTI MSM CE-BAM at 0x0000000001dc4000 irq 9
[ 0.664725] qcrypto 1de0000.qcrypto: qcrypto-ecb-aes
[ 0.664830] qcrypto 1de0000.qcrypto: qcrypto-cbc-aes
[ 0.664926] qcrypto 1de0000.qcrypto: qcrypto-ctr-aes
[ 0.665026] qcrypto 1de0000.qcrypto: qcrypto-ecb-des
[ 0.665126] qcrypto 1de0000.qcrypto: qcrypto-cbc-des
[ 0.665238] qcrypto 1de0000.qcrypto: qcrypto-ecb-3des
[ 0.665335] qcrypto 1de0000.qcrypto: qcrypto-cbc-3des
[ 0.665428] qcrypto 1de0000.qcrypto: qcrypto-xts-aes
[ 0.665525] qcrypto 1de0000.qcrypto: qcrypto-sha1
[ 0.665618] qcrypto 1de0000.qcrypto: qcrypto-sha256
[ 0.665704] qcrypto 1de0000.qcrypto: qcrypto-aead-hmac-sha1-cbc-aes
[ 0.665799] qcrypto 1de0000.qcrypto: qcrypto-aead-hmac-sha1-cbc-des
[ 0.665892] qcrypto 1de0000.qcrypto: qcrypto-aead-hmac-sha1-cbc-3des
[ 0.665987] qcrypto 1de0000.qcrypto: qcrypto-aead-hmac-sha256-cbc-aes
[ 0.666081] qcrypto 1de0000.qcrypto: qcrypto-aead-hmac-sha256-cbc-des
[ 0.666173] qcrypto 1de0000.qcrypto: qcrypto-aead-hmac-sha256-cbc-3des
[ 0.666269] qcrypto 1de0000.qcrypto: qcrypto-hmac-sha1
[ 0.666372] qcrypto 1de0000.qcrypto: qcrypto-hmac-sha256
[ 0.666465] qcrypto 1de0000.qcrypto: qcrypto-aes-ccm
[ 0.666561] qcrypto 1de0000.qcrypto: qcrypto-rfc4309-aes-ccm
[ 0.667040] qcom_ice_get_device_tree_data: No vdd-hba-supply regulator, assuming not needed
[ 0.667652] ufshcd-qcom 1d84000.ufshc: ufshcd_populate_vreg: Unable to find vccq-supply regulator, assuming enabled
[ 0.668238] qcom_ice_get_pdevice: found ice device ffffffd1ea33a200
[ 0.668241] qcom_ice_get_pdevice: matching platform device ffffffd1f2fd1c00
[ 0.668385] register_client_adhoc:find path.src 123 dest 512
[ 0.668545] register_client_adhoc:find path.src 1 dest 757
[ 0.668638] register_client_adhoc:Client handle 25 ufshc_mem
[ 0.669238] scsi host0: ufshcd
[ 0.673623] qcom_ice 1d90000.ufsice: QC ICE 3.1.75 device found @0xffffff80115b8000
[ 0.680551] SCSI Media Changer driver v0.25
[ 0.680854] register_client_adhoc:find path.src 184 dest 817
[ 0.680911] register_client_adhoc:find path.src 152 dest 512
[ 0.681040] register_client_adhoc:Client handle 26 ac0000.qcom,qupv3_1_geni_se
[ 0.681881] Ethernet Channel Bonding Driver: v3.7.1 (April 27, 2011)
[ 0.682424] IMQ driver loaded successfully. (numdevs = 2, numqueues = 1, imq_dev_accurate_stats = 1)
[ 0.682537] libphy: Fixed MDIO Bus: probed
[ 0.682581] tun: Universal TUN/TAP device driver, 1.6
[ 0.682602] sky2: driver version 1.30
[ 0.682943] PPP generic driver version 2.4.2
[ 0.682972] PPP BSD Compression module registered
[ 0.682975] PPP Deflate Compression module registered
[ 0.683001] PPP MPPE Compression module registered
[ 0.683004] NET: Registered protocol family 24
[ 0.683011] PPTP driver version 0.8.5
[ 0.683284] CLD80211: Initializing
[ 0.683322] usbcore: registered new interface driver r8152
[ 0.683330] usbcore: registered new interface driver asix
[ 0.683353] usbcore: registered new interface driver ax88179_178a
[ 0.683360] usbcore: registered new interface driver cdc_ether
[ 0.683366] usbcore: registered new interface driver net1080
[ 0.683373] usbcore: registered new interface driver cdc_subset
[ 0.683379] usbcore: registered new interface driver zaurus
[ 0.683390] usbcore: registered new interface driver cdc_ncm
[ 0.685882] msm_sharedmem: msm_sharedmem_probe: Device created for client 'rmtfs'
[ 0.687625] msm_sharedmem: msm_sharedmem_probe: Device created for client 'oembackup'
[ 0.689406] iommu: Adding device a600000.ssusb to group 18
[ 0.690811] dwc3 a600000.dwc3: changing max_speed on rev 00000000
[ 0.691681] register_client_adhoc:find path.src 61 dest 512
[ 0.691844] register_client_adhoc:find path.src 61 dest 676
[ 0.691927] register_client_adhoc:find path.src 1 dest 583
[ 0.692043] register_client_adhoc:Client handle 27 usb0
[ 0.692489] ufshcd-qcom 1d84000.ufshc: ufshcd_print_pwr_info:[RX, TX]: gear=[1, 1], lane[1, 1], pwr[SLOWAUTO_MODE, SLOWAUTO_MODE], rate = 0
[ 0.694242] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.694247] ehci-pci: EHCI PCI platform driver
[ 0.694254] ehci-platform: EHCI generic platform driver
[ 0.694462] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 0.694478] ohci-pci: OHCI PCI platform driver
[ 0.694494] ohci-platform: OHCI generic platform driver
[ 0.694945] usbcore: registered new interface driver usb-storage
[ 0.694955] usbcore: registered new interface driver usb_ehset_test
[ 0.694961] usbcore: registered new interface driver lvs
[ 0.695971] qpnp-pdphy c440000.qcom,spmi:qcom,pm6150@0:qcom,usb-pdphy@1700: usbpd_create failed: -517
[ 0.696407] usbcore: registered new interface driver xpad
[ 0.696412] [HXTP] himax_hx83112_init
[ 0.696414] [HXTP] himax_hx83112_probe:Enter
[ 0.696417] [HXTP] Himax common touch panel driver init
[ 0.696426] [HXTP] Not match Himax IC,exit
[ 0.696429] [TP]Goodix-gt9886: tp_driver_init is called
[ 0.696431] [TP] tp_ic_name = Goodix-gt9886
[ 0.696435] [TP] get_project = 206b1 132785
[ 0.696444] [TP] Driver does not match the project
[ 0.696446] Invalid project
[ 0.696448] Lcd module not found
[ 0.696452] [LQTP-nt36672c] nvt_driver_init 5732: is called
[ 0.696454] [TP] tp_ic_name = novatek,nf_nt36672c
[ 0.696456] [TP] get_project = 206b1 132785
[ 0.696459] [TP] Driver does not match the project
[ 0.696461] Invalid project
[ 0.696464] Lcd module not found
[ 0.696466] [TP]focaltech,fts: tp_driver_init is called
[ 0.696468] [TP] tp_ic_name = focaltech,fts
[ 0.696471] [TP] get_project = 206b1 132785
[ 0.696731] oppo_fp_common soc:oppo_fp_common: fp_id_amount: 1
[ 0.696734] oppo_fp_common soc:oppo_fp_common: fp_id_value1
[ 0.696740] oppo_fp_common soc:oppo_fp_common: fpsensor_type: 18, chip_name: G_OPTICAL_G3, eng_menu: -1,-1
[ 0.696923] fpc1020_init 111OK
[ 0.697084] input: qwerty as /devices/virtual/input/input1
[ 0.697104] gf_spi: register goodix_fp_ok
[ 0.697107] gf_spi: version V1.2.09
[ 0.697153] gf_spi: status = 0x0
[ 0.697378] qcom,qpnp-rtc c440000.qcom,spmi:qcom,pm6150@0:qcom,pm6150_rtc: rtc core: registered qpnp_rtc as rtc0
[ 0.697569] i2c /dev entries driver
[ 0.697886] i2c_geni 880000.i2c: gi2c irq: 198 name: /soc/i2c@880000
[ 0.698372] i2c_geni 890000.i2c: gi2c irq: 199 name: /soc/i2c@890000
[ 0.698589] i2c_geni 894000.i2c: Bus frequency not specified, default to 400KHz.
[ 0.698610] i2c_geni 894000.i2c: gi2c irq: 200 name: /soc/i2c@894000
[ 0.698637] nq-nci 0-0028: ese GPIO <OPTIONAL> error getting from OF node
[ 0.698649] nq-nci 0-0028: nfc_parse_dt: irq : 37, ven : 12, firm : 36, clkreq_gpio: 31
[ 0.698682] nq-nci 0-0028: nqx_probe: ese gpio not provided
[ 0.698999] i2c_geni a84000.i2c: Bus frequency not specified, default to 400KHz.
[ 0.699023] i2c_geni a84000.i2c: gi2c irq: 213 name: /soc/i2c@a84000
[ 0.699282] [TP]focaltech,fts: fts_tp_probe is called
[ 0.699286] [LQTP-touchpanel] register_common_touch_device 5356: is called
[ 0.699299] [LQTP-touchpanel] init_parse_dts 4712: irq_gpio = 9
[ 0.699305] [LQTP-touchpanel] init_parse_dts 4728: reset_gpio = 8
[ 0.699309] [LQTP-touchpanel] init_parse_dts 4738: irq_gpio = 9, irq_flags = 0x2002, reset_gpio = 8
[ 0.699312] [LQTP-touchpanel] init_parse_dts 4744: cs_gpio = -2
[ 0.699314] [LQTP-touchpanel] init_parse_dts 4750: ts->cs-gpio not specified
[ 0.699321] [LQTP-touchpanel] init_parse_dts 4836: int-mode not specified
[ 0.699324] [LQTP-touchpanel] init_parse_dts 4869: TX_NUM = 16, RX_NUM = 34
[ 0.699328] [LQTP-touchpanel] init_parse_dts 4914: LCD_WIDTH = 1080, LCD_HEIGHT = 2400, max_x = 1080, max_y = 2400, limit_witdh = 0, limit_height = 54
[ 0.699330] [LQTP-touchpanel] init_parse_dts 4984: panel is oncell!
[ 0.699498] focaltech,fts 3-0038: 3-0038 supply touch_vddio not found, using dummy regulator
[ 0.699518] focaltech,fts 3-0038: 3-0038 supply touch_lab not found, using dummy regulator
[ 0.699529] focaltech,fts 3-0038: 3-0038 supply touch_ibb not found, using dummy regulator
[ 0.699538] [TP]focaltech,fts: Set the reset_gpio
[ 0.704033] [LQTP-touchpanel] tp_powercontrol_2v8 5128: Enable the 2v8_gpio, hw_res->enable2v8_gpio is 94
[ 0.720043] [TP]focaltech,fts: Set the reset_gpio
[ 0.729551] nfcc_hw_check: raw_fw_get_version success----
[ 0.740852] ufshcd-qcom 1d84000.ufshc: ufshcd_print_pwr_info:[RX, TX]: gear=[3, 3], lane[1, 1], pwr[FAST MODE, FAST MODE], rate = 2
[ 0.741340] scsi 0:0:0:49488: Well-known LUN SAMSUNG KM8V8001JM-B813 1900 PQ: 0 ANSI: 6
[ 0.742062] scsi 0:0:0:49456: Well-known LUN SAMSUNG KM8V8001JM-B813 1900 PQ: 0 ANSI: 6
[ 0.742748] scsi 0:0:0:49476: Well-known LUN SAMSUNG KM8V8001JM-B813 1900 PQ: 0 ANSI: 6
[ 0.743643] scsi 0:0:0:0: Direct-Access SAMSUNG KM8V8001JM-B813 1900 PQ: 0 ANSI: 6
[ 0.744251] scsi 0:0:0:1: Direct-Access SAMSUNG KM8V8001JM-B813 1900 PQ: 0 ANSI: 6
[ 0.744748] scsi 0:0:0:2: Direct-Access SAMSUNG KM8V8001JM-B813 1900 PQ: 0 ANSI: 6
[ 0.745229] scsi 0:0:0:3: Direct-Access SAMSUNG KM8V8001JM-B813 1900 PQ: 0 ANSI: 6
[ 0.745716] scsi 0:0:0:4: Direct-Access SAMSUNG KM8V8001JM-B813 1900 PQ: 0 ANSI: 6
[ 0.746200] scsi 0:0:0:5: Direct-Access SAMSUNG KM8V8001JM-B813 1900 PQ: 0 ANSI: 6
[ 0.747398] sd 0:0:0:0: [sda] Write Protect is off
[ 0.747407] sd 0:0:0:0: [sda] Mode Sense: 00 32 00 10
[ 0.747661] sd 0:0:0:1: [sdb] Write Protect is off
[ 0.747669] sd 0:0:0:1: [sdb] Mode Sense: 00 32 00 10
[ 0.747695] sd 0:0:0:0: [sda] Optimal transfer size 524288 bytes
[ 0.747909] sd 0:0:0:1: [sdb] Optimal transfer size 524288 bytes
[ 0.747967] sd 0:0:0:2: [sdc] Write Protect is off
[ 0.747976] sd 0:0:0:2: [sdc] Mode Sense: 00 32 00 10
[ 0.748093] sd 0:0:0:3: [sdd] Write Protect is off
[ 0.748102] sd 0:0:0:3: [sdd] Mode Sense: 00 32 00 10
[ 0.748272] sd 0:0:0:2: [sdc] Optimal transfer size 524288 bytes
[ 0.748415] sd 0:0:0:3: [sdd] Optimal transfer size 524288 bytes
[ 0.748545] sd 0:0:0:4: [sde] Write Protect is off
[ 0.748553] sd 0:0:0:4: [sde] Mode Sense: 00 32 00 10
[ 0.748870] sd 0:0:0:4: [sde] Optimal transfer size 524288 bytes
[ 0.751328] sdb: sdb1 sdb2
[ 0.751669] sda: sda1 sda2 sda3 sda4 sda5 sda6 sda7 sda8 sda9 sda10 sda11 sda12
[ 0.752445] sdc: sdc1 sdc2
[ 0.752590] sd 0:0:0:5: [sdf] Write Protect is off
[ 0.752599] sd 0:0:0:5: [sdf] Mode Sense: 00 32 00 10
[ 0.752952] sdd: sdd1 sdd2 sdd3 sdd4 sdd5
[ 0.753316] sd 0:0:0:5: [sdf] Optimal transfer size 524288 bytes
[ 0.755222] sde: sde1 sde2 sde3 sde4 sde5 sde6 sde7 sde8 sde9 sde10 sde11 sde12 sde13 sde14 sde15 sde16 sde17 sde18 sde19 sde20 sde21 sde22 sde23 sde24 sde25 sde26 sde27 sde28 sde29 sde30 sde31 sde32 sde33 sde34 sde35 sde36 sde37 sde38 sde39 sde40 sde41 sde42 sde43 sde44 sde45 sde46 sde47 sde48 sde49 sde50 sde51 sde52 sde53 sde54 sde55 sde56 sde57 sde58 sde59 sde60 sde61 sde62 sde63
[ 0.755936] sdf: sdf1 sdf2 sdf3 sdf4 sdf5 sdf6 sdf7 sdf8 sdf9 sdf10 sdf11
[ 0.784293] nq-nci 0-0028: nfcc_hw_check:1234 FW: 01.10.34
[ 0.784334] nq-nci 0-0028: nqx_probe: probing NFCC NQxxx exited successfully
[ 0.924102] [LQTP-touchpanel] init_input_device 4537: is called
[ 0.924146] input: LQTP-touchpanel as /devices/virtual/input/input2
[ 0.924182] input: LQTP-touchpanel_kpd as /devices/virtual/input/input3
[ 0.924198] [TP]vendor:FOCAL fw:tp/206b1/FW_FT3518_FOCAL.img limit:tp/206b1/LIMIT_FT3518_FOCAL.img
[ 0.924202] [TP]focaltech,fts: tp_type = 5, panel_data->fw_name = tp/206b1/FW_FT3518_FOCAL.img
[ 0.924204] [TP]focaltech,fts: tp_type = 5, panel_data->fw_name = tp/206b1/FW_FT3518_FOCAL.img
[ 0.924217] [LQTP-interface] touch_i2c_read_block 188: read block_3, kzalloc success(len:1, buf_size:256).
[ 0.925052] [TP]focaltech,fts: read chip id:0x5452
[ 0.925763] [TP]focaltech,fts: FW VER:73
[ 0.925767] [TP]focaltech,fts: MODE_NORMAL
[ 0.926374] [LQTP-touchpanel] register_common_touch_device 5613: Clock ticks for an esd cycle: 500
[ 0.926379] [LQTP-touchpanel] esd_handle_switch 5282: Esd protector started, cycle: 2 s
[ 0.926382] [LQTP-touchpanel] register_common_touch_device 5645: curent usb state is 0
[ 0.926385] [TP]focaltech,fts: MODE_CHARGE, write 0x8B=0
[ 0.926387] [LQTP-interface] touch_i2c_write_block 366: write block_3, kzalloc success(len:2, buf_size:256).
[ 0.926552] [LQTP-touchpanel] init_touchpanel_proc 3119: entry
[ 0.926568] [LQTP-touchpanel] init_debug_info_proc 4354: entry
[ 0.926578] [LQTP-touchpanel] register_common_touch_device 5729: Touch panel probe : normal end
[ 0.926587] [TP]focal_common: [EX]: sysfs_create_group() succeeded!
[ 0.926590] [TP]focaltech,fts: fts_tp_probe, probe normal end
[ 0.926869] i2c_geni a8c000.i2c: gi2c irq: 214 name: /soc/i2c@a8c000
[ 0.927224] [OPPO_CHG][oppo_vooc_fw_type_dt]oppo_vooc_fw_type_dt batt_type_4400 is 1,vooc_fw_type = 0x2
[ 0.927227] [OPPO_CHG][oppo_vooc_fw_type_dt] vooc_fw_upate:1
[ 0.927230] [OPPO_CHG][oppo_vooc_fw_type_dt]qcom,vooc-low-temp is 50
[ 0.927233] [OPPO_CHG][oppo_vooc_fw_type_dt]qcom,vooc-little-cool-temp is 160
[ 0.927235] [OPPO_CHG][oppo_vooc_fw_type_dt]qcom,vooc-cool-temp is 120
[ 0.927239] [OPPO_CHG][oppo_vooc_fw_type_dt]qcom,vooc-little-cool-to-normal-temp is 180
[ 0.927241] [OPPO_CHG][oppo_vooc_fw_type_dt]qcom,vooc-normal-to-little-cool-current is 5
[ 0.927244] [OPPO_CHG][oppo_vooc_fw_type_dt]qcom,vooc-high-temp is 430
[ 0.927247] [OPPO_CHG][oppo_vooc_fw_type_dt]qcom,vooc-low-soc is 1
[ 0.927249] [OPPO_CHG][oppo_vooc_fw_type_dt]qcom,vooc-high-soc is 90
[ 0.927252] [OPPO_CHG][oppo_vooc_fw_type_dt]qcom,vooc_multistep_adjust_current_supportis 1
[ 0.927255] [OPPO_CHG][oppo_vooc_fw_type_dt]qcom,vooc_multistep_initial_batt_temp is 310
[ 0.927259] [OPPO_CHG][oppo_vooc_fw_type_dt]qcom,vooc_strategy_normal_current is 6
[ 0.927262] [OPPO_CHG][oppo_vooc_fw_type_dt]qcom,vooc_strategy1_batt_low_temp1 is 415
[ 0.927265] [OPPO_CHG][oppo_vooc_fw_type_dt]qcom,vooc_strategy1_batt_low_temp2 is 420
[ 0.927268] [OPPO_CHG][oppo_vooc_fw_type_dt]qcom,vooc_strategy1_batt_low_temp0 is 400
[ 0.927271] [OPPO_CHG][oppo_vooc_fw_type_dt]qcom,vooc_strategy1_batt_high_temp0 is 425
[ 0.927274] [OPPO_CHG][oppo_vooc_fw_type_dt]qcom,vooc_strategy1_batt_high_temp1 is 430
[ 0.927277] [OPPO_CHG][oppo_vooc_fw_type_dt]qcom,vooc_strategy1_batt_high_temp2 is 435
[ 0.927280] [OPPO_CHG][oppo_vooc_fw_type_dt]qcom,vooc_strategy1_high_current0 is 4
[ 0.927284] [OPPO_CHG][oppo_vooc_fw_type_dt]qcom,vooc_strategy1_high_current1 is 3
[ 0.927287] [OPPO_CHG][oppo_vooc_fw_type_dt]qcom,vooc_strategy1_high_current2 is 2
[ 0.927291] [OPPO_CHG][oppo_vooc_fw_type_dt]qcom,vooc_strategy1_low_current2 is 3
[ 0.927294] [OPPO_CHG][oppo_vooc_fw_type_dt]qcom,vooc_strategy1_low_current1 is 4
[ 0.927297] [OPPO_CHG][oppo_vooc_fw_type_dt]qcom,vooc_strategy1_low_current0 is 4
[ 0.927301] [OPPO_CHG][oppo_vooc_fw_type_dt]qcom,vooc_strategy2_batt_up_temp1 is 375
[ 0.927304] [OPPO_CHG][oppo_vooc_fw_type_dt]qcom,vooc_strategy2_batt_up_down_temp2 is 380
[ 0.927308] [OPPO_CHG][oppo_vooc_fw_type_dt]qcom,vooc_strategy2_batt_up_temp3 is 390
[ 0.927312] [OPPO_CHG][oppo_vooc_fw_type_dt]qcom,vooc_strategy2_batt_up_down_temp4 is 400
[ 0.927315] [OPPO_CHG][oppo_vooc_fw_type_dt]qcom,vooc_strategy2_batt_up_temp5 is 410
[ 0.927319] [OPPO_CHG][oppo_vooc_fw_type_dt]qcom,vooc_strategy2_batt_up_temp6 is 415
[ 0.927323] [OPPO_CHG][oppo_vooc_fw_type_dt]qcom,vooc_strategy2_high0_current is 5
[ 0.927326] [OPPO_CHG][oppo_vooc_fw_type_dt]qcom,vooc_strategy2_high1_current is 4
[ 0.927330] [OPPO_CHG][oppo_vooc_fw_type_dt]qcom,vooc_strategy2_high2_current is 3
[ 0.927334] [OPPO_CHG][oppo_vooc_fw_type_dt]qcom,vooc_strategy2_high3_current is 2
[ 0.927336] [OPPO_CHG][oppo_vooc_fw_type_dt]qcom,vooc_batt_over_high_temp is 440
[ 0.927339] [OPPO_CHG][oppo_vooc_fw_type_dt]qcom,vooc_batt_over_low_temp is 45
[ 0.927342] [OPPO_CHG][oppo_vooc_fw_type_dt]qcom,vooc_over_high_or_low_current is 0
[ 0.927353] [OPPO_CHG][oppo_vooc_gpio_dt_init]chip->vooc_gpio.switch1_gpio =70
[ 0.927361] [OPPO_CHG][oppo_vooc_gpio_dt_init]chip->vooc_gpio.switch1_ctr1_gpio =71
[ 0.927364] [OPPO_CHG][oppo_vooc_gpio_dt_init]chip->vooc_gpio.switch2_gpio not specified
[ 0.927369] [OPPO_CHG][oppo_vooc_gpio_dt_init]chip->vooc_gpio.reset_gpio =103
[ 0.927375] [OPPO_CHG][oppo_vooc_gpio_dt_init]chip->vooc_gpio.clock_gpio =88
[ 0.927380] [OPPO_CHG][oppo_vooc_gpio_dt_init]chip->vooc_gpio.data_gpio =89
[ 0.927492] [OPPO_CHG][oppo_vooc_gpio_dt_init] switch1_gpio = 70,switch2_gpio = -2, reset_gpio = 103,
clock_gpio = 88, data_gpio = 89, data_irq = 332
[ 0.927503] [OPPO_CHG][oppo_is_rf_ftm_mode] boot_mode:2, return false
[ 0.927637] [OPPO_CHG][oppo_is_rf_ftm_mode] boot_mode:2, return false
[ 0.927644] [OPPO_CHG][init_vooc_proc] version:0, fw_path:fastchg/206b1/oppo_vooc_fw_rk826.bin
[ 0.927650] [OPPO_CHG][rk826_driver_probe]rk826 probe success,fw_type = 0x2,fw_version = 0xf9,mcu_version = 0x0
[ 0.927773] i2c_geni a94000.i2c: Bus frequency not specified, default to 400KHz.
[ 0.927795] i2c_geni a94000.i2c: gi2c irq: 215 name: /soc/i2c@a94000
[ 0.929876] PMIC@SID0: PM8008 v1.0 options: 0, 0, 0, 0
[ 0.933857] I2C PMIC: i2c_pmic_probe: I2C PMIC probe successful
[ 0.936302] pm8008_l1: Bringing 0uV into 528000-528000uV
[ 0.938628] pm8008_l2: Bringing 0uV into 528000-528000uV
[ 0.941263] pm8008_l3: Bringing 0uV into 2900000-2900000uV
[ 0.943561] pm8008_l4: Bringing 0uV into 2800000-2800000uV
[ 0.945880] pm8008_l5: Bringing 0uV into 1500000-1500000uV
[ 0.948438] pm8008_l6: Bringing 0uV into 1500000-1500000uV
[ 0.951000] pm8008_l7: Bringing 0uV into 1500000-1500000uV
[ 0.953027] I2C PMIC: i2c_pmic_probe: I2C PMIC probe successful
[ 0.953773] IR NEC protocol handler initialized
[ 0.953780] IR RC5(x/sz) protocol handler initialized
[ 0.953785] IR RC6 protocol handler initialized
[ 0.953790] IR JVC protocol handler initialized
[ 0.953795] IR Sony protocol handler initialized
[ 0.953800] IR SANYO protocol handler initialized
[ 0.953805] IR Sharp protocol handler initialized
[ 0.953810] IR MCE Keyboard/mouse protocol handler initialized
[ 0.953815] IR XMP protocol handler initialized
[ 0.954752] sde_mdp_parse_dt_prop_len: <SDEROT_INFO> prop qcom,mdss-inline-rot-qos-lut : doesn't exist in device tree
[ 0.954760] sde_mdp_parse_dt_prop_len: <SDEROT_INFO> prop qcom,mdss-inline-rot-danger-lut : doesn't exist in device tree
[ 0.954766] sde_mdp_parse_dt_prop_len: <SDEROT_INFO> prop qcom,mdss-inline-rot-safe-lut : doesn't exist in device tree
[ 0.954836] register_client_adhoc:find path.src 1 dest 590
[ 0.955135] register_client_adhoc:Client handle 27 sde_reg
[ 0.955689] register_client_adhoc:find path.src 25 dest 512
[ 0.955880] register_client_adhoc:Client handle 28 mdss_rotator
[ 0.955895] register_client_adhoc:find path.src 1 dest 590
[ 0.956128] register_client_adhoc:Client handle 29 mdss_rot_reg
[ 0.956483] No change in context(0==0), skip
[ 0.957875] sde_rotator_evtlog_create_debugfs: evtlog_status: enable:1, panic:1, dump:2
[ 0.959417] sde_rotator ae00000.qcom,mdss_rotator: <SDEROT_INFO> SDE v4l2 rotator probe success
[ 0.961024] iommu: Adding device ae00000.qcom,mdss_rotator:qcom,smmu_rot_unsec_cb to group 19
[ 0.961078] sde_smmu_probe: <SDEROT_INFO> iommu v2 domain[0] mapping and clk register successful!
[ 0.961861] iommu: Adding device ae00000.qcom,mdss_rotator:qcom,smmu_rot_sec_cb to group 20
[ 0.961889] sde_smmu_probe: <SDEROT_INFO> iommu v2 domain[1] mapping and clk register successful!
[ 0.962713] iommu: Adding device 9900000.qcom,msm_npu to group 21
[ 0.963204] register_client_adhoc:find path.src 154 dest 512
[ 0.963445] register_client_adhoc:find path.src 154 dest 620
[ 0.963701] register_client_adhoc:Client handle 30 9900000.qcom,msm_npu
[ 0.963708] NPU_INFO: npu_parse_dt_bw: 1687 NPU BW client sets up successfully
[ 0.964803] NPU_INFO: npu_adjust_max_power_level: 1786 Adjust max_pwrlevel to 3[29]
[ 0.968661] msm_vidc: err: Failed to get platform resources
[ 0.968678] msm_vidc: err: Failed to init core
[ 0.968694] msm_vidc_v4l2: probe of aa00000.qcom,vidc0 failed with error -22
[ 0.970595] iommu: Adding device aa00000.qcom,vidc1:non_secure_cb to group 22
[ 0.971113] iommu: Adding device aa00000.qcom,vidc1:secure_bitstream_cb to group 23
[ 0.972583] iommu: Adding device aa00000.qcom,vidc1:secure_pixel_cb to group 24
[ 0.973577] iommu: Adding device aa00000.qcom,vidc1:secure_non_pixel_cb to group 25
[ 0.977330] iommu: Adding device soc:qcom,cam_smmu:msm_cam_smmu_ife to group 26
[ 0.977555] iommu: Adding device soc:qcom,cam_smmu:msm_cam_smmu_lrme to group 27
[ 0.977755] iommu: Adding device soc:qcom,cam_smmu:msm_cam_smmu_jpeg to group 28
[ 0.977811] platform soc:qcom,cam_smmu:msm_cam_icp_fw: assigned reserved memory node camera_region@8e400000
[ 0.978125] iommu: Adding device soc:qcom,cam_smmu:msm_cam_smmu_icp to group 29
[ 0.978328] iommu: Adding device soc:qcom,cam_smmu:msm_cam_smmu_cpas_cdm to group 30
[ 0.979703] register_client_adhoc:find path.src 1 dest 589
[ 0.980098] register_client_adhoc:Client handle 31 cam_ahb
[ 0.980294] register_client_adhoc:find path.src 136 dest 512
[ 0.980484] register_client_adhoc:Client handle 32 cam_hf_1_mnoc
[ 0.980626] register_client_adhoc:find path.src 146 dest 778
[ 0.980672] register_client_adhoc:Client handle 33 cam_hf_1_camnoc
[ 0.980784] register_client_adhoc:find path.src 145 dest 512
[ 0.980971] register_client_adhoc:Client handle 34 cam_hf_2_mnoc
[ 0.981110] register_client_adhoc:find path.src 147 dest 778
[ 0.981154] register_client_adhoc:Client handle 35 cam_hf_2_camnoc
[ 0.981265] register_client_adhoc:find path.src 137 dest 512
[ 0.981453] register_client_adhoc:Client handle 36 cam_sf_1_mnoc
[ 0.981580] register_client_adhoc:find path.src 148 dest 778
[ 0.981624] register_client_adhoc:Client handle 37 cam_sf_1_camnoc
[ 0.986062] CAM_INFO: CAM-CPAS: cam_cpas_hw_start: 1021 AXI client=[15][cpas-cdm][0] comp[1024], comp_ab[1024], uncomp[1024]
[ 0.990249] CAM_WARN: CAM-ISP: cam_vfe_top_ver2_init: 1020 Invalid mux type: 0
[ 0.990260] CAM_WARN: CAM-ISP: cam_vfe_top_ver2_init: 1020 Invalid mux type: 0
[ 0.990297] CAM_ERR: CAM-ISP: cam_vfe_bus_rd_ver1_init: 1082 Inval_prms soc_info:ffffffd1e936b058 hw_intf:ffffffd1eedf9280 hw_info0000000000000000
[ 0.990304] CAM_ERR: CAM-ISP: cam_vfe_bus_rd_ver1_init: 1083 controller: ffffffd1e92df800
[ 0.990310] CAM_ERR: CAM-ISP: cam_vfe_core_init: 875 Error! RD cam_vfe_bus_init failed
[ 0.990473] CAM_INFO: CAM-CPAS: cam_cpas_hw_start: 1021 AXI client=[9][ife][0] comp[10640000000], comp_ab[10640000000], uncomp[10640000000]
[ 0.992154] CAM_WARN: CAM-ISP: cam_vfe_top_ver2_init: 1020 Invalid mux type: 0
[ 0.992160] CAM_WARN: CAM-ISP: cam_vfe_top_ver2_init: 1020 Invalid mux type: 0
[ 0.992192] CAM_ERR: CAM-ISP: cam_vfe_bus_rd_ver1_init: 1082 Inval_prms soc_info:ffffffd1e936d058 hw_intf:ffffffd1e9b5b600 hw_info0000000000000000
[ 0.992198] CAM_ERR: CAM-ISP: cam_vfe_bus_rd_ver1_init: 1083 controller: ffffffd1e9390700
[ 0.992204] CAM_ERR: CAM-ISP: cam_vfe_core_init: 875 Error! RD cam_vfe_bus_init failed
[ 0.992325] CAM_INFO: CAM-CPAS: cam_cpas_hw_start: 1021 AXI client=[10][ife][1] comp[10640000000], comp_ab[10640000000], uncomp[10640000000]
[ 0.993530] CAM_ERR: CAM-UTIL: cam_soc_util_get_option_clk_by_name: 525 No clk named ife_dsp_clk found. Dev vfe2
[ 0.993538] CAM_WARN: CAM-ISP: cam_vfe_init_soc_resources: 109 Option clk get failed with rc -14
[ 0.993696] CAM_WARN: CAM-ISP: cam_vfe_top_ver2_init: 1020 Invalid mux type: 0
[ 0.993703] CAM_WARN: CAM-ISP: cam_vfe_top_ver2_init: 1020 Invalid mux type: 0
[ 0.993836] CAM_INFO: CAM-CPAS: cam_cpas_hw_start: 1021 AXI client=[11][ife][2] comp[10640000000], comp_ab[10640000000], uncomp[10640000000]
[ 0.996464] CAM_INFO: CAM-ISP: cam_isp_dev_probe: 171 Camera ISP probe complete
[ 0.998862] CAM_INFO: CAM: cam_res_mgr_probe: 689 Disable shared gpio support.
[ 1.001036] CAM_INFO: CAM-CCI: cam_cci_platform_probe: 429 Device Type :0
[ 1.001686] CAM_INFO: CAM: cam_res_mgr_probe: 689 Disable shared gpio support.
[ 1.002567] CAM_INFO: CAM-CCI: cam_cci_platform_probe: 429 Device Type :1
[ 1.005366] CAM_INFO: CAM-ACTUATOR: cam_actuator_parse_dt: 69 No GPIO found
[ 1.005408] CAM_INFO: CAM-ACTUATOR: cam_actuator_parse_dt: 69 No GPIO found
[ 1.007130] get flash_name failed rc -22
[ 1.007149] flash_proc_init get flash name is NULL 316
[ 1.007154] CAM_ERR: CAM-FLASH: cam_flash_platform_probe: 636 create flash_proc failed
[ 1.007186] get flash_name failed rc -22
[ 1.007202] flash_proc_init get flash name is NULL 316
[ 1.007207] CAM_ERR: CAM-FLASH: cam_flash_platform_probe: 636 create flash_proc failed
[ 1.007237] get flash_name failed rc -22
[ 1.007253] flash_proc_init get flash name is NULL 316
[ 1.007259] CAM_ERR: CAM-FLASH: cam_flash_platform_probe: 636 create flash_proc failed
[ 1.007296] get flash_name failed rc -22
[ 1.007312] flash_proc_init get flash name is NULL 316
[ 1.007317] CAM_ERR: CAM-FLASH: cam_flash_platform_probe: 636 create flash_proc failed
[ 1.017816] CAM_INFO: CAM-JPEG: cam_jpeg_dev_probe: 170 Camera JPEG probe complete
[ 1.020364] CAM_INFO: CAM-CPAS: cam_cpas_hw_start: 1021 AXI client=[20][lrmecpas][0] comp[7200000], comp_ab[7200000], uncomp[7200000]
[ 1.020745] CAM_INFO: CAM-CPAS: cam_cpas_hw_start: 1021 AXI client=[14][cam-cdm-intf][0] comp[1024], comp_ab[1024], uncomp[1024]
[ 1.021872] usbcore: registered new interface driver uvcvideo
[ 1.021877] USB Video Class driver (1.1.1)
[ 1.022408] [OPPO_CHG][mp2650_driver_probe] call
[ 1.022636] i2c_geni 890000.i2c: i2c error :-107
[ 1.022642] [OPPO_CHG][__mp2650_read_reg]i2c read fail: can't read from 53: -107
[ 1.045994] [OPPO_CHG][mp2650_mps_otg_en_gpio_init]: tongfeng test start!
[ 1.046097] [OPPO_CHG][mp2650_mps_otg_en_gpio_init]tongfeng test, gpio_val:0
[ 1.046104] [OPPO_CHG][mp2650_gpio_init]chip->mps_otg_en_gpio =55
[ 1.046109] [OPPO_CHG][mp2650_gpio_init] mp2650_gpio_init FINISH
[ 1.046114] [OPPO_CHG][mp2650_hardware_init]init mp2650 hardware !
[ 1.046120] [OPPO_CHG][mp2650_reset_charger] mp2650_reset_charger start
[ 1.048956] [OPPO_CHG][mp2650_suspend_charger] rc = 0
[ 1.048962] [OPPO_CHG][mp2650_disable_charging] mp2650_disable_charging
[ 1.054607] [OPPO_CHG][mp2650_float_voltage_write]vfloat_mv = 4370
[ 1.060281] [OPPO_CHG][mp2650_hardware_init]init mp2650 hardware volt = 4000, set_prechg_tag =0
[ 1.061700] [OPPO_CHG][mp2650_charging_current_write_fast]set charge current = 500
[ 1.063118] [OPPO_CHG][mp2650_set_termchg_current]term_current = 200
[ 1.073011] [OPPO_CHG][mp2650_set_mps_otg_enable]mp2650_set_mps_otg_enable start
[ 1.080089] [OPPO_CHG][mp2650_unsuspend_charger] rc = 0
[ 1.080111] [OPPO_CHG][mp2650_wireless_set_mps_otg_en_val]set value:0, gpio_val:0
[ 1.084352] [OPPO_CHG][mp2650_enable_charging]mp2650_enable_charging
[ 1.085801] [OPPO_CHG][mp2650_driver_probe] success
[ 1.085961] [OPPO_CHG][da9313_driver_probe] call
[ 1.089395] [OPPO_CHG][smb5_probe][oppo_chg_init] vooc || gauge || chg not ready, will do after bettery init.
[ 1.105856] [OPPO_CHG][bq27541_hw_config]DEVICE_TYPE is 0xFFA5, FIRMWARE_VERSION is 0xFFA5
[ 1.105869] [OPPO_CHG][bq27541_driver_probe] success
[ 1.108597] msm_lmh_dcvs:limits_dcvs_probe lmh0: dump_thres=0. Doesn't support dump!
[ 1.110730] msm_lmh_dcvs:limits_dcvs_probe lmh1: dump_thres=0. Doesn't support dump!
[ 1.116465] (NULL device *): hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info().
[ 1.116571] (NULL device *): hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info().
[ 1.116663] (NULL device *): hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info().
[ 1.116884] device-mapper: uevent: version 1.0.3
[ 1.117008] device-mapper: ioctl: 4.37.0-ioctl (2017-09-20) initialised: dm-devel@redhat.com
[ 1.117454] bt_dt_parse_vreg_info: qca,bt-vdd-vl: is not provided in device tree
[ 1.117463] bt_dt_parse_vreg_info: qca,bt-vdd-vm: is not provided in device tree
[ 1.117469] bt_dt_parse_vreg_info: qca,bt-vdd-5c: is not provided in device tree
[ 1.117475] bt_dt_parse_vreg_info: qca,bt-vdd-5a: is not provided in device tree
[ 1.117481] bt_dt_parse_vreg_info: qca,bt-vdd-vh: is not provided in device tree
[ 1.117499] bt_dt_parse_vreg_info: qca,bt-vdd-ldo: is not provided in device tree
[ 1.117505] bt_dt_parse_vreg_info: qca,bt-chip-pwd: is not provided in device tree
[ 1.117512] bt_power_populate_dt_pinfo: bt-reset-gpio not provided in device tree
[ 1.117518] bt_dt_parse_clk_info: clocks is not provided in device tree
[ 1.117523] bt_power_populate_dt_pinfo: clock not provided in device tree
[ 1.118338] EDAC DEVICE0: Giving out device to module soc:kryo-erp controller cache: DEV soc:kryo-erp (INTERRUPT)
[ 1.119535] sdhci: Secure Digital Host Controller Interface driver
[ 1.119541] sdhci: Copyright(c) Pierre Ossman
[ 1.119546] sdhci-pltfm: SDHCI platform and OF driver helper
[ 1.120503] qcom_ice_get_pdevice: found ice device ffffffd1ea338c00
[ 1.120513] qcom_ice_get_pdevice: matching platform device ffffffd1f2fd7400
[ 1.121149] qpnp_vibrator_ldo_probe: Vibrator LDO successfully registered: uV = 3000000, overdrive = disabled
[ 1.121230] sdhci_msm 8804000.sdhci: sdhci_msm_probe: ICE device is not enabled
[ 1.121678] register_client_adhoc:find path.src 81 dest 512
[ 1.122098] register_client_adhoc:find path.src 1 dest 608
[ 1.122211] usbcore: registered new interface driver usbhid
[ 1.122220] usbhid: USB HID core driver
[ 1.122337] register_client_adhoc:Client handle 38 sdhc2
[ 1.122423] ashmem: initialized
[ 1.122444] lowmemorykiller: kernel obj name lowmemorykiller
[ 1.122671] hans_core_init: -
[ 1.123260] ipa_ut ipa_ut_module_init:1043 Loading IPA test module...
[ 1.134546] mmc0: SDHCI controller on 8804000.sdhci [8804000.sdhci] using 64-bit ADMA in legacy mode
[ 1.173590] bimc-bwmon 90b6300.qcom,cpu-cpu-llcc-bwmon: BW HWmon governor registered.
[ 1.173657] bimc-bwmon 90cd000.qcom,cpu-llcc-ddr-bwmon: BW HWmon governor registered.
[ 1.173909] bimc-bwmon 60400.qcom,npu-npu-ddr-bwmon: BW HWmon governor registered.
[ 1.174021] bimc-bwmon 70300.qcom,npudsp-npu-ddr-bwmon: BW HWmon governor registered.
[ 1.174801] arm-memlat-mon soc:qcom,cpu0-cpu-l3-latmon: Memory Latency governor registered.
[ 1.174852] arm-memlat-mon soc:qcom,cpu6-cpu-l3-latmon: Memory Latency governor registered.
[ 1.174898] arm-memlat-mon soc:qcom,cpu0-cpu-llcc-latmon: Memory Latency governor registered.
[ 1.174941] arm-memlat-mon soc:qcom,cpu6-cpu-llcc-latmon: Memory Latency governor registered.
[ 1.174986] arm-memlat-mon soc:qcom,cpu0-llcc-ddr-latmon: Memory Latency governor registered.
[ 1.175027] arm-memlat-mon soc:qcom,cpu6-llcc-ddr-latmon: Memory Latency governor registered.
[ 1.175071] arm-memlat-mon soc:qcom,cpu0-computemon: Compute governor registered.
[ 1.175111] arm-memlat-mon soc:qcom,cpu6-computemon: Compute governor registered.
[ 1.176564] register_client_adhoc:find path.src 1 dest 627
[ 1.176862] register_client_adhoc:Client handle 39 soc:qcom,snoc_cnoc_keepalive
[ 1.177468] register_client_adhoc:find path.src 1 dest 770
[ 1.177534] register_client_adhoc:Client handle 40 soc:qcom,cpu-cpu-llcc-bw
[ 1.178080] register_client_adhoc:find path.src 129 dest 512
[ 1.178147] register_client_adhoc:Client handle 41 soc:qcom,cpu-llcc-ddr-bw
[ 1.179002] register_client_adhoc:find path.src 1 dest 770
[ 1.179062] register_client_adhoc:Client handle 42 soc:qcom,cpu0-cpu-llcc-lat
[ 1.179476] register_client_adhoc:find path.src 1 dest 770
[ 1.179534] register_client_adhoc:Client handle 43 soc:qcom,cpu6-cpu-llcc-lat
[ 1.180123] register_client_adhoc:find path.src 129 dest 512
[ 1.180320] register_client_adhoc:Client handle 44 soc:qcom,cpu0-llcc-ddr-lat
[ 1.180819] register_client_adhoc:find path.src 129 dest 512
[ 1.180878] register_client_adhoc:Client handle 45 soc:qcom,cpu6-llcc-ddr-lat
[ 1.181375] register_client_adhoc:find path.src 129 dest 512
[ 1.181438] register_client_adhoc:Client handle 46 soc:qcom,cpu0-cpu-ddr-latfloor
[ 1.181944] register_client_adhoc:find path.src 129 dest 512
[ 1.182030] register_client_adhoc:Client handle 47 soc:qcom,cpu6-cpu-ddr-latfloor
[ 1.182696] register_client_adhoc:find path.src 154 dest 512
[ 1.182871] register_client_adhoc:Client handle 48 soc:qcom,npu-npu-ddr-bw
[ 1.183310] register_client_adhoc:find path.src 154 dest 512
[ 1.183476] register_client_adhoc:Client handle 49 soc:qcom,npudsp-npu-ddr-bw
[ 1.183966] register_client_adhoc:find path.src 26 dest 512
[ 1.184113] register_client_adhoc:Client handle 51 soc:qcom,gpubw
[ 1.186035] spmi spmi-0: disallowed SPMI write to sid=0, addr=0xC841
[ 1.186047] qcom-spmi-gpio c440000.qcom,spmi:qcom,pm6150@0:pinctrl@c000: write 0x41 failed
[ 1.186054] qcom-spmi-gpio c440000.qcom,spmi:qcom,pm6150@0:pinctrl@c000: pin_config_group_set op failed for group 6
[ 1.186060] qcom-spmi-adc5.c c440000.qcom,spmi:qcom,pm6150@0:vadc@3100: Error applying setting, reverse things back
[ 1.187374] qcom-llcc-pmu 90cc000.llcc-pmu: Registered llcc_pmu, type: 7
[ 1.188712] kernel patch version v1.2.010
[ 1.188796] patch mp address =0xffffff8013036000
[ 1.188809] patch major=494,minor=0
[ 1.188842] patch memdev device create ok!
[ 1.188844] qihoo:qihoo_engine_init:533: init
[ 1.188877]
[ 1.188877] patch init uts info =4.14.117-perf+ #1 SMP PREEMPT Tue Dec 1 19:57:11 CST 2020,digest =c736146ee46b4ed029f5ff4c9e5d242a,len=57
[ 1.188992] usbcore: registered new interface driver snd-usb-audio
[ 1.189196] iommu: Adding device soc:usb_audio_qmi_dev to group 31
[ 1.190756] GACT probability NOT on
[ 1.190772] Mirror/redirect action on
[ 1.190782] u32 classifier
[ 1.190786] Actions configured
[ 1.190796] Netfilter messages via NETLINK v0.30.
[ 1.191020] nf_conntrack version 0.5.0 (65536 buckets, 262144 max)
[ 1.191095] ctnetlink v0.93: registering with nfnetlink.
[ 1.191325] xt_time: kernel timezone is -0000
[ 1.191391] gre: GRE over IPv4 demultiplexor driver
[ 1.191396] IPv4 over IPsec tunneling driver
[ 1.191681] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 1.192138] arp_tables: arp_tables: (C) 2002 David S. Miller
[ 1.192214] Initializing XFRM netlink socket
[ 1.192229] IPsec XFRM device driver
[ 1.192402] NET: Registered protocol family 10
[ 1.193165] Segment Routing with IPv6
[ 1.193209] mip6: Mobile IPv6
[ 1.193222] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 1.193723] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver
[ 1.194114] NET: Registered protocol family 17
[ 1.194129] NET: Registered protocol family 15
[ 1.194149] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
[ 1.194155] Ebtables v2.0 registered
[ 1.194276] l2tp_core: L2TP core driver, V2.0
[ 1.194286] l2tp_ppp: PPPoL2TP kernel driver, V2.0
[ 1.194290] l2tp_ip: L2TP IP encapsulation support (L2TPv3)
[ 1.194303] l2tp_netlink: L2TP netlink interface
[ 1.194322] l2tp_eth: L2TP ethernet pseudowire support (L2TPv3)
[ 1.194327] l2tp_ip6: L2TP IP encapsulation support for IPv6 (L2TPv3)
[ 1.194356] sctp: Hash tables configured (bind 256/256)
[ 1.194715] oppo_nf_hooks_init module init netlink successfully.
[ 1.194747] oppo_nf_hooks_init module register netfilter ops successfully.
[ 1.195495] minidump-id not found for npu
[ 1.195510] subsys-pil-tz 9800000.qcom,npu: for npu segments only will be dumped.
[ 1.195558] subsys-pil-tz 9800000.qcom,npu: for md_npu segments only will be dumped.
[ 1.196071] NPU_WARN: npu_bridge_mbox_work: 1119 NPU fw is not loaded
[ 1.197288] dwc3 a600000.dwc3: changing max_speed on rev 00000000
[ 1.198800] usb_bam_init: setting SPS_BAM_SMMU_EN flag with (a704000.qcom,usbbam)
[ 1.198931] sps:BAM 0x000000000a704000 is registered.
[ 1.199206] register_client_adhoc:find path.src 61 dest 512
[ 1.199543] register_client_adhoc:find path.src 61 dest 676
[ 1.199713] register_client_adhoc:find path.src 1 dest 583
[ 1.199903] register_client_adhoc:Client handle 50 usb0
[ 1.204044] qpnp-pdphy c440000.qcom,spmi:qcom,pm6150@0:qcom,usb-pdphy@1700: usbpd_create failed: -517
[ 1.204720] [OPPO_CHG][oppo_get_chg_ops] oppo_get_chg_ops--mp2650_chg_ops
[ 1.204727] [OPPO_CHG][smb5_probe]smb5_Probe Start----
[ 1.205853] [OPPO_CHG][smblib_disable_hw_jeita]jeita reg 0x1090 = 0x1b
[ 1.206650] (NULL device *): hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info().
[ 1.206790] YGYG pd NULhei
[ 1.206793] [OPPO_CHG][register_oppo_pdsvooc_svid]YGYG oppo pps usbpd phandle failed (-517)
[ 1.308381] [OPPO_CHG][oppo_chg_parse_custom_dt]chargerid_switch_gpio:30
[ 1.308506] [OPPO_CHG][oppo_chg_parse_custom_dt]dischg-gpio:1275
[ 1.308531] [OPPO_CHG][oppo_chg_parse_custom_dt]ship-gpio:110
[ 1.308542] [OPPO_CHG][oppo_chg_parse_custom_dt]Couldn't read qcom,shortc-gpio rc = 0, qcom,shortc-gpio:-2
[ 1.308552] [OPPO_CHG][oppo_chg_parse_custom_dt]Couldn't read qcom,shipmode-id-gpio rc = 0, qcom,shipmode-id-gpio:-2
[ 1.308581] [OPPO_CHG][oppo_mcu_id_gpio_init]successful get mcu id default
[ 1.308584] [OPPO_CHG][oppo_charger_error_gpio_init]get charger_error_default fail
[ 1.308614] [OPPO_CHG][oppo_chg_parse_charger_dt]usb_high_than_bat_decidegc:100
[ 1.308620] [OPPO_CHG][oppo_chg_parse_charger_dt] CONFIG_HIGH_TEMP_VERSION disabled
[ 1.308697] [OPPO_CHG][oppo_chg_parse_charger_dt] normal_phase1_bat_decidegc fail
[ 1.308706] [OPPO_CHG][oppo_chg_parse_charger_dt] temp_normal_phase1_vfloat_mv fail
[ 1.308715] [OPPO_CHG][oppo_chg_parse_charger_dt] temp_normal_phase1_fastchg_current_ma fail
[ 1.308724] [OPPO_CHG][oppo_chg_parse_charger_dt] normal_phase2_bat_decidegc fail
[ 1.308734] [OPPO_CHG][oppo_chg_parse_charger_dt] temp_normal_phase2_vfloat_mv fail
[ 1.308743] [OPPO_CHG][oppo_chg_parse_charger_dt] temp_normal_phase2_fastchg_current_ma_high fail
[ 1.308753] [OPPO_CHG][oppo_chg_parse_charger_dt] temp_normal_phase2_fastchg_current_ma_low fail
[ 1.308763] [OPPO_CHG][oppo_chg_parse_charger_dt] normal_phase3_bat_decidegc fail
[ 1.308772] [OPPO_CHG][oppo_chg_parse_charger_dt] temp_normal_phase3_vfloat_mv fail
[ 1.308782] [OPPO_CHG][oppo_chg_parse_charger_dt] temp_normal_phase3_fastchg_current_ma_high fail
[ 1.308793] [OPPO_CHG][oppo_chg_parse_charger_dt] temp_normal_phase3_fastchg_current_ma_low fail
[ 1.308802] [OPPO_CHG][oppo_chg_parse_charger_dt] normal_phase4_bat_decidegc fail
[ 1.308811] [OPPO_CHG][oppo_chg_parse_charger_dt] temp_normal_phase4_vfloat_mv fail
[ 1.308822] [OPPO_CHG][oppo_chg_parse_charger_dt] temp_normal_phase4_fastchg_current_ma_high fail
[ 1.308832] [OPPO_CHG][oppo_chg_parse_charger_dt] temp_normal_phase4_fastchg_current_ma_low fail
[ 1.308841] [OPPO_CHG][oppo_chg_parse_charger_dt] normal_phase5_bat_decidegc fail
[ 1.308850] [OPPO_CHG][oppo_chg_parse_charger_dt] temp_normal_phase5_vfloat_mv fail
[ 1.308860] [OPPO_CHG][oppo_chg_parse_charger_dt] temp_normal_phase5_fastchg_current_ma fail
[ 1.414643] [OPPO_CHG][bq27541_sha1_hmac_authenticate]bq27541_authenticate success
[ 1.414651] [OPPO_CHG][oppo_get_smooth_soc_switch]smooth_switch = 0
[ 1.427749] [OPPO_CHG][oppo_chg_get_shutdown_soc] healthd_ready not ready
[ 1.427756] [OPPO_CHG][oppo_chg_get_shutdown_soc] healthd_ready not ready
[ 1.427762] [OPPO_CHG][oppo_chg_get_battery_data][soc ui_soc soc_load smooth_soc smooth_switch] = [100 100 100 100 0]
[ 1.427946] [OPPO_CHG][smblib_set_usb_suspend]svooc, suspending...
[ 1.427972] [OPPO_CHG][smblib_usb_plugin_locked][1]!!!!!
[ 1.428872] [LQTP-touchpanel] switch_usb_state 1410: check usb state : 1, is_suspended: 0
[ 1.429243] get prop 20 is not supported in usb
[ 1.431704] [OPPO_CHG][smblib_get_prop_usb_current_now]ibus current: val->intval[512]
[ 1.433318] [OPPO_CHG][smblib_set_usb_suspend]svooc, suspending...
[ 1.437200] [OPPO_CHG][smblib_set_usb_suspend]svooc, suspending...
[ 1.437285] [OPPO_CHG][opchg_get_charger_type]APSD_STATUS = 0x00
[ 1.437291] [OPPO_CHG][oppo_charger_detect_check]Charger in 1 charger_type=0
[ 1.437297] [OPPO_CHG][mp2650_hardware_init]init mp2650 hardware !
[ 1.437302] [OPPO_CHG][mp2650_reset_charger] mp2650_reset_charger start
[ 1.437465] [OPPO_CHG][oppo_usbtemp_monitor_common]run first!
[ 1.437545] [OPPO_CHG][smb5_show_charger_status]SMB5 status - usb:present=1 type=0 batt:present = 1 health = 1 charge = 1
[ 1.437627] QPNP SMB5 probed successfully
[ 1.440176] thermal thermal_zone0: binding zone pm6150-tz with cdev battery failed:-22
[ 1.440357] Get prop 20 is not supported in pc_port
[ 1.440583] [OPPO_CHG][mp2650_suspend_charger] rc = 0
[ 1.440589] [OPPO_CHG][mp2650_disable_charging] mp2650_disable_charging
[ 1.440723] power_supply main: driver failed to report `flash_trigger' property: -1
[ 1.440795] get prop 20 is not supported in usb
[ 1.440998] get prop 20 is not supported in ac
[ 1.445659] [OPPO_CHG][smblib_get_prop_usb_current_now]ibus current: val->intval[62]
[ 1.448848] [OPPO_CHG][mp2650_float_voltage_write]vfloat_mv = 4370
[ 1.454313] dwc3 a600000.dwc3: changing max_speed on rev 00000000
[ 1.454914] [OPPO_CHG][mp2650_hardware_init]init mp2650 hardware volt = 4371, set_prechg_tag =0
[ 1.456425] [OPPO_CHG][mp2650_charging_current_write_fast]set charge current = 500
[ 1.456499] usb_bam_init: setting SPS_BAM_SMMU_EN flag with (a704000.qcom,usbbam)
[ 1.456619] sps:BAM 0x000000000a704000 is registered.
[ 1.456955] register_client_adhoc:find path.src 61 dest 512
[ 1.457444] register_client_adhoc:find path.src 61 dest 676
[ 1.457612] register_client_adhoc:find path.src 1 dest 583
[ 1.457848] register_client_adhoc:Client handle 50 usb0
[ 1.457944] [OPPO_CHG][mp2650_set_termchg_current]term_current = 200
[ 1.463222] usbpd usbpd0: Type-C Source (default) connected
[ 1.463715] [OPPO_CHG][smblib_set_usb_pd_allowed_voltage]smblib_set_adapter_allowance: 0x08
[ 1.463836] power_supply main: driver failed to report `flash_trigger' property: -1
[ 1.466078] dwc3 a600000.dwc3: changing max_speed on rev 00000000
[ 1.468064] usb_bam_init: setting SPS_BAM_SMMU_EN flag with (a704000.qcom,usbbam)
[ 1.468241] sps:BAM 0x000000000a704000 is registered.
[ 1.468599] register_client_adhoc:find path.src 61 dest 512
[ 1.469016] register_client_adhoc:find path.src 61 dest 676
[ 1.469238] register_client_adhoc:find path.src 1 dest 583
[ 1.469321] [OPPO_CHG][mp2650_set_mps_otg_enable]mp2650_set_mps_otg_enable start
[ 1.469510] register_client_adhoc:Client handle 50 usb0
[ 1.470374] core_ctl: Creating CPU group 0
[ 1.470384] core_ctl: Init CPU0 state
[ 1.470388] core_ctl: Init CPU1 state
[ 1.470392] core_ctl: Init CPU2 state
[ 1.470396] core_ctl: Init CPU3 state
[ 1.470400] core_ctl: Init CPU4 state
[ 1.470404] core_ctl: Init CPU5 state
[ 1.470548] core_ctl: Creating CPU group 6
[ 1.470554] core_ctl: Init CPU6 state
[ 1.470558] core_ctl: Init CPU7 state
[ 1.470837] registered taskstats version 1
[ 1.476824] [OPPO_CHG][mp2650_unsuspend_charger] rc = 0
[ 1.476839] [OPPO_CHG][mp2650_wireless_set_mps_otg_en_val]set value:0, gpio_val:0
[ 1.481336] [OPPO_CHG][mp2650_enable_charging]mp2650_enable_charging
[ 1.484339] [OPPO_CHG][mp2650_float_voltage_write]vfloat_mv = 8870
[ 1.485850] [OPPO_CHG][oppo_chg_set_charging_current][BATTERY]LED ON, charging current: 1100
[ 1.485857] [OPPO_CHG][mp2650_charging_current_write_fast]set charge current = 1100
[ 1.487362] [OPPO_CHG][mp2650_set_termchg_current]term_current = 125
[ 1.503814] [OPPO_CHG][oppo_chg_update_ui_soc]full [soc ui_soc smooth_soc down_limit up_limit] = [100 100 100 60 2]
[ 1.503827] [OPPO_CHG][oppo_chg_update_ui_soc]ui_soc:100,waiting_for_ffc:1,fastchg_to_ffc:1,fastchg_start:0,chg_type=0x0
[ 1.503833] [OPPO_CHG][oppo_chg_get_shutdown_soc] healthd_ready not ready
[ 1.506045] [OPPO_CHG][oppo_chg_print_log][1970-01-01 00:00:01.506020051 UTC]CHGR[1,0,5052,1,2],BAT[1,0,1,0,1,5],GAUGE[307,4377,4376,-31,56250,100,100,100,4234],STATUS[0x0,0,0,0,0,0x0],OTHER[0,0,1,0,0,0,0,0,0,1]
[ 1.527275] update_feature, Project Name [179]
[ 1.527564] ADSPRPC: Secure VMID = 22
[ 1.527569] ADSPRPC: Secure VMID = 37
[ 1.527812] iommu: Adding device soc:qcom,msm_fastrpc:qcom,msm_fastrpc_compute_cb1 to group 32
[ 1.528178] iommu: Adding device soc:qcom,msm_fastrpc:qcom,msm_fastrpc_compute_cb2 to group 33
[ 1.528479] iommu: Adding device soc:qcom,msm_fastrpc:qcom,msm_fastrpc_compute_cb3 to group 34
[ 1.528759] iommu: Adding device soc:qcom,msm_fastrpc:qcom,msm_fastrpc_compute_cb4 to group 35
[ 1.529034] iommu: Adding device soc:qcom,msm_fastrpc:qcom,msm_fastrpc_compute_cb5 to group 36
[ 1.529312] iommu: Adding device soc:qcom,msm_fastrpc:qcom,msm_fastrpc_compute_cb6 to group 37
[ 1.529583] iommu: Adding device soc:qcom,msm_fastrpc:qcom,msm_fastrpc_compute_cb7 to group 38
[ 1.529867] iommu: Adding device soc:qcom,msm_fastrpc:qcom,msm_fastrpc_compute_cb8 to group 39
[ 1.530144] iommu: Adding device soc:qcom,msm_fastrpc:qcom,msm_fastrpc_compute_cb9 to group 40
[ 1.530953] iommu: Adding device soc:qcom,msm_fastrpc:qcom,msm_fastrpc_compute_cb10 to group 41
[ 1.531241] iommu: Adding device soc:qcom,msm_fastrpc:qcom,msm_fastrpc_compute_cb11 to group 42
[ 1.531516] iommu: Adding device soc:qcom,msm_fastrpc:qcom,msm_fastrpc_compute_cb12 to group 43
[ 1.532654] op_rf_cable_probe enter!
[ 1.537996] op_rf_cable_probe: probe ok, rf_cable, SMEM_RF_INFO:136, sts:65280, [0_gpio:118, 0_val:0], [1_gpio:-2, 1_val:255], 0_irq:366, 1_irq:0
[ 1.538000] op_rf_cable_probe: probe ok, rf_pds, SMEM_RF_INFO:136, sts:65535, [0_gpio:-2, 0_val:255], [1_gpio:-2, 1_val:255], 0_irq:0, 1_irq:0
[ 1.538381] iommu: Adding device 62ec0000.slim:qcom,iommu_slim_ctrl_cb to group 44
[ 1.539842] input: gpio-keys as /devices/platform/soc/soc:gpio_keys/input/input4
[ 1.539862] gpio-keys soc:gpio_keys: vol_up release
[ 1.539866] gpio-keys soc:gpio_keys: vol_down release
[ 1.539989] qcom,qpnp-rtc c440000.qcom,spmi:qcom,pm6150@0:qcom,pm6150_rtc: setting system clock to 1970-01-21 03:07:51 UTC (1739271)
[ 1.540726] lpm_levels: register_cluster_lpm_stats()
[ 1.540768] lpm_levels: register_cluster_lpm_stats()
[ 1.543028] rmnet_ipa3 started initialization
[ 1.543286] RNDIS_IPA module is loaded.
[ 1.543919] msm_bus_late_init: Remove handoff bw requests
[ 1.544534] usb30_prim_gdsc: disabling
[ 1.544859] pm8008-chip-en: disabling
[ 1.547110] regulator_proxy_consumer_remove_all: removing regulator proxy consumer requests
[ 1.547140] ALSA device list:
[ 1.547142] No soundcards found.
[ 1.547145] hypnus: cluster idx = 1, cpumask = 0xc0
[ 1.547147] hypnus: min freq: 652800, max freq: 2323200
[ 1.547149] hypnus: cluster idx = 0, cpumask = 0x3f
[ 1.547151] hypnus: min freq: 300000, max freq: 1804800
[ 1.547154] hypnus: Totally 2 clusters
[ 1.547468] [PHOENIX] phx_klog_bootstage: KERNEL_DO_INITCALLS_DONE
[ 1.547471] [PHOENIX] phx_klog_bootstage: KERNEL_DO_BASIC_SETUP_DONE
[ 1.547492] Warning: unable to open an initial console.
[ 1.548553] Freeing unused kernel memory: 4096K
[ 1.548687] [PHOENIX] phx_klog_bootstage: KERNEL_INIT_DONE
[ 1.548714] oppo_root_check,is_unlocked:1
[ 1.556226] init: init first stage started!
[ 1.556262] init: ForceNormalBoot::twrp_fastboot: 1: Success
[ 1.556267] init: ForceNormalBoot::normal_boot: 0: Success
[ 1.556288] init: IsRecoveryMode::recovery_mode: 1: No such file or directory
[ 1.556293] init: IsRecoveryMode::twrp_fastboot: 0: No such file or directory
[ 1.556296] init: First stage mount skipped (recovery mode)
[ 1.556312] init: IsRecoveryMode::recovery_mode: 1: No such file or directory
[ 1.556316] init: IsRecoveryMode::twrp_fastboot: 0: No such file or directory
[ 1.556438] init: [libfs_mgr]dt_fstab: Skip disabled entry for partition vendor
[ 1.556446] init: [libfs_mgr]ReadFstabFromDt(): failed to read fstab from dt
[ 1.574862] init: 6 output lines suppressed due to ratelimiting
[ 1.582197] init: Loading SELinux policy
[ 1.583820] SELinux: 8192 avtab hash slots, 21225 rules.
[ 1.586798] SELinux: 8192 avtab hash slots, 21225 rules.
[ 1.586804] SELinux: 1 users, 2 roles, 1438 types, 0 bools, 1 sens, 1024 cats
[ 1.586806] SELinux: 97 classes, 21225 rules
[ 1.587850] SELinux: policy capability network_peer_controls=1
[ 1.587856] SELinux: policy capability open_perms=1
[ 1.587858] SELinux: policy capability extended_socket_class=1
[ 1.587860] SELinux: policy capability always_check_network=0
[ 1.587862] SELinux: policy capability cgroup_seclabel=0
[ 1.587864] SELinux: policy capability nnp_nosuid_transition=1
[ 1.587867] SELinux: Completing initialization.
[ 1.587867] SELinux: Setting up existing superblocks.
[ 1.620823] audit: type=1403 audit(1739271.579:2): policy loaded auid=4294967295 ses=4294967295
[ 1.620944] selinux: SELinux: Loaded policy from /sepolicy
[ 1.620944]
[ 1.621987] selinux: SELinux: Skipping /product_file_contexts: empty file
[ 1.621987]
[ 1.622019] selinux: SELinux: Skipping /odm_file_contexts: empty file
[ 1.622019]
[ 1.622080] selinux: SELinux: Loaded file_contexts
[ 1.622080]
[ 1.630734] init: init second stage started!
[ 1.634798] init: Using Android DT directory /proc/device-tree/firmware/android/
[ 1.636093] selinux: SELinux: Skipping /product_file_contexts: empty file
[ 1.636093]
[ 1.636129] selinux: SELinux: Skipping /odm_file_contexts: empty file
[ 1.636129]
[ 1.636165] selinux: SELinux: Loaded file_contexts
[ 1.636165]
[ 1.636175] init: Running restorecon...
[ 1.638895] init: Couldn't load property file '/system/etc/prop.default': open() failed: No such file or directory: No such file or directory
[ 1.639443] init: Overriding previous 'ro.' property 'ro.config.notification_sound':'OnTheHunt.ogg' with new value 'omni_notification1.ogg'
[ 1.639453] init: Overriding previous 'ro.' property 'ro.config.alarm_alert':'Alarm_Classic.ogg' with new value 'omni_alarm1.ogg'
[ 1.639475] init: Couldn't load property file '/system/build.prop': open() failed: No such file or directory: No such file or directory
[ 1.645542] audit: type=1400 audit(1739271.603:3): avc: denied { read } for pid=480 comm="init" name="bin" dev="rootfs" ino=11981 scontext=u:r:vendor_init:s0 tcontext=u:object_r:rootfs:s0 tclass=dir permissive=1
[ 1.645563] audit: type=1400 audit(1739271.603:4): avc: denied { read } for pid=479 comm="init" name="bin" dev="rootfs" ino=11981 scontext=u:r:vendor_init:s0 tcontext=u:object_r:rootfs:s0 tclass=dir permissive=1
[ 1.645699] audit: type=1400 audit(1739271.603:5): avc: denied { create } for pid=1 comm="init" name="cgroup.procs" scontext=u:r:init:s0 tcontext=u:object_r:rootfs:s0 tclass=file permissive=1
[ 1.645708] audit: type=1400 audit(1739271.603:6): avc: denied { write } for pid=1 comm="init" path="/uid_0/pid_481/cgroup.procs" dev="rootfs" ino=25453 scontext=u:r:init:s0 tcontext=u:object_r:rootfs:s0 tclass=file permissive=1
[ 1.671100] ueventd: ueventd started!
[ 1.673385] selinux: SELinux: Skipping /product_file_contexts: empty file
[ 1.673385]
[ 1.673491] selinux: SELinux: Skipping /odm_file_contexts: empty file
[ 1.673491]
[ 1.673584] selinux: SELinux: Loaded file_contexts
[ 1.673584]
[ 1.673670] ueventd: Parsing file /ueventd.rc...
[ 1.673979] ueventd: Parsing file /vendor/ueventd.rc...
[ 1.674017] ueventd: Unable to read config file '/vendor/ueventd.rc': open() failed: No such file or directory
[ 1.674043] ueventd: Parsing file /odm/ueventd.rc...
[ 1.674071] ueventd: Unable to read config file '/odm/ueventd.rc': open() failed: No such file or directory
[ 1.674094] ueventd: Parsing file /ueventd.qcom.rc...
[ 1.716167] power_supply main: driver failed to report `flash_trigger' property: -1
[ 1.716175] synth uevent: /devices/platform/soc/c440000.qcom,spmi/spmi-0/spmi0-00/c440000.qcom,spmi:qcom,pm6150@0:qcom,qpnp-smb5/power_supply/main: failed to send uevent
[ 1.716177] power_supply main: uevent: failed to send synthetic uevent
[ 1.718970] [OPPO_CHG][smblib_get_prop_usb_current_now]ibus current: val->intval[518]
[ 1.823386] audit: type=1400 audit(1739271.779:7): avc: denied { module_request } for pid=1 comm="init" kmod="fs-functionfs" scontext=u:r:init:s0 tcontext=u:r:kernel:s0 tclass=system permissive=1
[ 1.823587] audit: type=1400 audit(1739271.779:8): avc: denied { entrypoint } for pid=492 comm="init" path="/system/bin/logd" dev="rootfs" ino=12082 scontext=u:r:logd:s0 tcontext=u:object_r:rootfs:s0 tclass=file permissive=1
[ 1.824831] audit: type=1400 audit(1739271.783:9): avc: denied { map } for pid=492 comm="logd" path="/system/bin/logd" dev="rootfs" ino=12082 scontext=u:r:logd:s0 tcontext=u:object_r:rootfs:s0 tclass=file permissive=1
[ 1.824845] audit: type=1400 audit(1739271.783:10): avc: denied { read } for pid=492 comm="logd" path="/system/bin/logd" dev="rootfs" ino=12082 scontext=u:r:logd:s0 tcontext=u:object_r:rootfs:s0 tclass=file permissive=1
[ 1.832547] Mass Storage Function, version: 2009/09/11
[ 1.832564] LUN: removable file: (no medium)
[ 1.834173] file system registered
[ 1.834967] f_cdev_alloc: port_name:at_usb0 (0000000000000000) portno:(0)
[ 1.835369] f_cdev_alloc: port_name:at_usb1 (0000000000000000) portno:(1)
[ 1.835782] f_cdev_alloc: port_name:at_usb2 (0000000000000000) portno:(2)
[ 1.838073] logd: Cannot read /system/etc/event-log-tags
[ 1.839058] logd.auditd: start
[ 1.839082] logd.klogd: 1839062081
[ 1.864806] type=1400 audit(1739271.803:23): avc: denied { write } for comm="android.hardwar" path="/dev/kmsg" dev="tmpfs" ino=25291 scontext=u:r:recovery:s0 tcontext=u:object_r:kmsg_device:s0 tclass=chr_file permissive=1
[ 1.865708] type=1400 audit(1739271.803:23): avc: denied { write } for comm="android.hardwar" path="/dev/kmsg" dev="tmpfs" ino=25291 scontext=u:r:recovery:s0 tcontext=u:object_r:kmsg_device:s0 tclass=chr_file permissive=1
[ 1.865731] type=1400 audit(1739271.823:24): avc: denied { read } for comm="android.hardwar" name="power_supply" dev="sysfs" ino=37458 scontext=u:r:recovery:s0 tcontext=u:object_r:sysfs:s0 tclass=dir permissive=1
[ 1.865817] type=1400 audit(1739271.823:24): avc: denied { read } for comm="android.hardwar" name="power_supply" dev="sysfs" ino=37458 scontext=u:r:recovery:s0 tcontext=u:object_r:sysfs:s0 tclass=dir permissive=1
[ 1.865834] type=1400 audit(1739271.823:25): avc: denied { open } for comm="android.hardwar" path="/sys/class/power_supply" dev="sysfs" ino=37458 scontext=u:r:recovery:s0 tcontext=u:object_r:sysfs:s0 tclass=dir permissive=1
[ 1.866336] type=1400 audit(1739271.823:25): avc: denied { open } for comm="android.hardwar" path="/sys/class/power_supply" dev="sysfs" ino=37458 scontext=u:r:recovery:s0 tcontext=u:object_r:sysfs:s0 tclass=dir permissive=1
[ 1.866353] type=1400 audit(1739271.823:26): avc: denied { read } for comm="android.hardwar" name="type" dev="sysfs" ino=58328 scontext=u:r:recovery:s0 tcontext=u:object_r:sysfs:s0 tclass=file permissive=1
[ 1.867167] healthd: Unknown power supply type 'Main'
[ 1.963841] [OPPO_CHG][smblib_set_usb_pd_allowed_voltage]smblib_set_adapter_allowance: 0x01
[ 1.964051] power_supply main: driver failed to report `flash_trigger' property: -1
[ 2.036073] power_supply main: driver failed to report `flash_trigger' property: -1
[ 2.036153] get prop 20 is not supported in usb
[ 2.038660] [OPPO_CHG][smblib_get_prop_usb_current_now]ibus current: val->intval[506]
[ 2.208103] YGYG pd NULhei
[ 2.208115] [OPPO_CHG][register_oppo_pdsvooc_svid]YGYG2 oppo pps usbpd phandle failed (-197961766912)
[ 2.208129] [OPPO_CHG][register_oppo_pdsvooc_svid]YGYG pps pd registration success
[ 2.432072] [OPPO_CHG][typec_disable_cmd_work]!!! active t-c module
[ 2.432187] power_supply main: driver failed to report `flash_trigger' property: -1
[ 2.475482] msm-dsi-panel:[dsi_panel_tx_cmd_set:716] dsi_cmd qcom,mdss-dsi-post-panel-on-command
[ 2.485109] [OPPO_CHG][oppo_set_smb5_usb_props_type]old type[0], new type[4]
[ 2.485117] [OPPO_CHG][smblib_handle_apsd_done]!!!fg_oppo_set_input_current[0]
[ 2.485262] [OPPO_CHG][smblib_set_usb_suspend]svooc, suspending...
[ 2.485319] [OPPO_CHG][smblib_handle_apsd_done]!!!IRQ: apsd-done rising; SDP detected
[ 2.485426] [OPPO_CHG][opchg_get_charger_type]APSD_STATUS = 0x01
[ 2.485435] [OPPO_CHG][oppo_chg_update_ui_soc]ui_soc:100,waiting_for_ffc:1,fastchg_to_ffc:1,fastchg_start:0,chg_type=0x0
[ 2.485441] [OPPO_CHG][oppo_charger_detect_check]Charger in 1 charger_type=4
[ 2.485448] [OPPO_CHG][mp2650_hardware_init]init mp2650 hardware !
[ 2.485452] [OPPO_CHG][mp2650_reset_charger] mp2650_reset_charger start
[ 2.485791] power_supply main: driver failed to report `flash_trigger' property: -1
[ 2.485858] get prop 20 is not supported in usb
[ 2.489645] [OPPO_CHG][mp2650_suspend_charger] rc = 0
[ 2.489659] [OPPO_CHG][mp2650_disable_charging] mp2650_disable_charging
[ 2.493924] [OPPO_CHG][smblib_get_prop_usb_current_now]ibus current: val->intval[62]
[ 2.498226] [OPPO_CHG][mp2650_float_voltage_write]vfloat_mv = 4370
[ 2.504336] [OPPO_CHG][mp2650_hardware_init]init mp2650 hardware volt = 4377, set_prechg_tag =0
[ 2.505919] [OPPO_CHG][mp2650_charging_current_write_fast]set charge current = 500
[ 2.507433] [OPPO_CHG][mp2650_set_termchg_current]term_current = 200
[ 2.518102] [OPPO_CHG][mp2650_set_mps_otg_enable]mp2650_set_mps_otg_enable start
[ 2.525697] [OPPO_CHG][mp2650_unsuspend_charger] rc = 0
[ 2.525718] [OPPO_CHG][mp2650_wireless_set_mps_otg_en_val]set value:0, gpio_val:0
[ 2.530252] [OPPO_CHG][mp2650_enable_charging]mp2650_enable_charging
[ 2.533289] [OPPO_CHG][mp2650_float_voltage_write]vfloat_mv = 8870
[ 2.534807] [OPPO_CHG][oppo_chg_set_charging_current][BATTERY]LED ON, charging current: 1100
[ 2.534814] [OPPO_CHG][mp2650_charging_current_write_fast]set charge current = 1100
[ 2.536335] [OPPO_CHG][oppo_chg_set_input_current_limit][BATTERY]LED STATUS CHANGED, IS ON
[ 2.536344] [OPPO_CHG][oppo_chg_set_input_current_limit] led_on = 1, current_limit = 500,
led_temp_status = 0
[ 2.536351] [OPPO_CHG][mp2650_input_current_limit_write]usb input max current limit=500 setting 00
[ 2.536931] [OPPO_CHG][mp2650_get_pre_icl_index]pre icl=500 setting 00
[ 2.632852] [OPPO_CHG][mp2650_input_current_limit_write]usb input max current limit aicl chg_vol=4875 j[0]=500 sw_aicl_point:4500 aicl_end
[ 2.637413] [OPPO_CHG][mp2650_set_termchg_current]term_current = 125
[ 2.639440] i2c_geni a8c000.i2c: i2c error :-107
[ 2.639454] bq27541-battery 4-0055: error reading voltage, ret:1
[ 2.650410] [OPPO_CHG][oppo_chg_update_ui_soc]ui_soc:100,waiting_for_ffc:1,fastchg_to_ffc:1,fastchg_start:0,chg_type=0x0
[ 2.651775] msm-qusb-phy-v2 88e3000.qusb: override_phy_tune 12 67 28 ca 4 3 0
[ 2.652188] msm-dwc3 a600000.ssusb: DWC3 exited from low power mode
[ 2.652879] [OPPO_CHG][oppo_chg_print_log][1970-01-21 03:07:52.612893905 UTC]CHGR[1,4,4875,1,2],BAT[1,0,1,0,1,5],GAUGE[307,4377,4376,-73,506250,100,100,100,4234],STATUS[0x0,0,0,0,0,0x0],OTHER[0,0,1,0,0,0,290,287,0,1]
[ 3.093634] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts:
[ 3.094566] SELinux: Context u:object_r:persist_time_file:s0 is not valid (left unmapped).
[ 3.133911] EXT4-fs (dm-2): mounted filesystem without journal. Opts:
[ 3.146190] EXT4-fs (dm-0): mounted filesystem without journal. Opts:
[ 3.223021] F2FS-fs (sda12): Mounted with checkpoint version = 1b8aeabc
[ 3.354951] F2FS-fs (sda12): Mounted with checkpoint version = 1b8aeabf
[ 5.521540] [OPPO_CHG][smblib_usb_pd_adapter_allowance_override] allowed_voltage: 0x00, rc=0
[ 5.521575] [OPPO_CHG][oppo_set_smb5_usb_props_type]old type[4], new type[4]
[ 5.521664] get prop 20 is not supported in usb
[ 5.524172] [OPPO_CHG][smblib_get_prop_usb_current_now]ibus current: val->intval[512]
[ 6.852248] init: starting service 'adbd'...
[ 6.854170] libprocessgroup: CgroupMap::FindController called for [1] failed, RC file was not initialized properly
[ 6.854456] init: IsRecoveryMode::recovery_mode: 1: No such file or directory
[ 6.854479] init: IsRecoveryMode::twrp_fastboot: 0: No such file or directory
[ 6.854497] type=1400 audit(1612881461.286:225): avc: denied { open } for comm="recovery" path="/data/unencrypted/key/version" dev="sda12" ino=23 scontext=u:r:recovery:s0 tcontext=u:object_r:unencrypted_data_file:s0 tclass=file permissive=1
[ 6.854538] type=1400 audit(1612881464.754:226): avc: denied { create } for comm="init" name="cgroup.procs" scontext=u:r:init:s0 tcontext=u:object_r:rootfs:s0 tclass=file permissive=1
[ 6.854634] type=1400 audit(1612881464.754:226): avc: denied { create } for comm="init" name="cgroup.procs" scontext=u:r:init:s0 tcontext=u:object_r:rootfs:s0 tclass=file permissive=1
[ 6.854648] init: starting service 'sbinqseecomd'...
[ 6.854652] type=1400 audit(1612881464.754:227): avc: denied { write } for comm="init" path="/uid_0/pid_560/cgroup.procs" dev="rootfs" ino=25707 scontext=u:r:init:s0 tcontext=u:object_r:rootfs:s0 tclass=file permissive=1
[ 6.855699] init: Created socket '/dev/socket/adbd', mode 660, user 1000, group 1000
[ 6.855781] libprocessgroup: CgroupMap::FindController called for [560] failed, RC file was not initialized properly
[ 6.855955] init: cpuset cgroup controller is not mounted!
[ 6.856628] libprocessgroup: CgroupMap::FindController called for [1] failed, RC file was not initialized properly
[ 6.856944] init: IsRecoveryMode::recovery_mode: 1: No such file or directory
[ 6.879831] read descriptors
[ 6.879908] read strings
[ 7.066835] android_work: did not send uevent (0 0 0000000000000000)
[ 7.171317] msm-dwc3 a600000.ssusb: [OPPO_CHG]Avail curr from USB = 100, pre max_power = 0
[ 7.171507] [OPPO_CHG][smblib_set_usb_suspend]svooc, suspending...
[ 7.217674] android_work: sent uevent USB_STATE=CONNECTED
[ 7.917558] [OPPO_CHG][oppo_chg_set_charging_current][BATTERY]LED ON, charging current: 1100
[ 7.917568] [OPPO_CHG][mp2650_charging_current_write_fast]set charge current = 1100
[ 7.919712] [OPPO_CHG][oppo_chg_update_ui_soc]ui_soc:100,waiting_for_ffc:1,fastchg_to_ffc:1,fastchg_start:0,chg_type=0x0
[ 7.922159] [OPPO_CHG][oppo_chg_print_log][2021-02-09 14:37:45.825984029 UTC]CHGR[1,4,4873,1,2],BAT[1,0,1,0,1,10],GAUGE[307,4381,4380,-137,500000,100,100,100,4234],STATUS[0x0,0,0,0,0,0x0],OTHER[0,0,1,0,0,0,290,286,0,1]
[ 7.922687] ueventd: Uevent overflowed buffer, discarding
[ 9.323857] configfs-gadget gadget: high-speed config #1: b
[ 9.323960] msm-dwc3 a600000.ssusb: [OPPO_CHG]Avail curr from USB = 500, pre max_power = 100
[ 9.324165] [OPPO_CHG][smblib_set_usb_suspend]svooc, suspending...
[ 9.324211] android_work: sent uevent USB_STATE=CONFIGURED
[ 9.696245] [wdog_util]cpu avail mask: 0xff; ping mask: 0xff; irqs since last: 5787
[ 10.464052] sensor_dev_work match_id 2
[ 10.464061] sensor_dev_work ret 0
[ 11.861957] init: starting service 'sbinqseecomd'...
[ 11.863847] libprocessgroup: CgroupMap::FindController called for [1] failed, RC file was not initialized properly
[ 11.864146] init: IsRecoveryMode::recovery_mode: 1: No such file or directory
[ 11.864168] init: IsRecoveryMode::twrp_fastboot: 0: No such file or directory
[ 11.864214] libprocessgroup: CgroupMap::FindController called for [567] failed, RC file was not initialized properly
[ 11.864238] init: cpuset cgroup controller is not mounted!
[ 11.864720] init: cannot execve('/sbin/qseecomd'): No such file or directory
[ 11.865659] init: Service 'sbinqseecomd' (pid 567) exited with status 127
[ 11.865684] init: Sending signal 9 to service 'sbinqseecomd' (pid 567) process group...
[ 11.865705] libprocessgroup: CgroupMap::FindController called for [1] failed, RC file was not initialized properly
[ 12.782249] [OPPO_CHG][oppo_chg_update_ui_soc]ui_soc:100,waiting_for_ffc:1,fastchg_to_ffc:1,fastchg_start:0,chg_type=0x0
[ 12.784703] [OPPO_CHG][oppo_chg_print_log][2021-02-09 14:37:50.688528454 UTC]CHGR[1,4,4876,1,2],BAT[1,0,1,0,1,15],GAUGE[307,4382,4381,-136,506250,100,100,100,4234],STATUS[0x0,0,0,0,0,0x0],OTHER[0,0,1,0,0,0,290,287,0,1]
[ 12.785235] ueventd: Uevent overflowed buffer, discarding
Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment