Skip to content

Instantly share code, notes, and snippets.

@simcop2387
Created May 28, 2012 13:24
Show Gist options
  • Save simcop2387/2819160 to your computer and use it in GitHub Desktop.
Save simcop2387/2819160 to your computer and use it in GitHub Desktop.
slic3r
acceleration = 0
bed_size = 140,140
bed_temperature = 95
bottom_layer_speed_ratio = 0.3
bridge_fan_speed = 100
bridge_flow_ratio = 1
bridge_speed = 75
complete_objects = 0
cooling = 1
disable_fan_first_layers = 1
duplicate = 1
duplicate_distance = 6
duplicate_grid = 1,1
end_gcode = M104 S0 ; turn off temperature\nG28 X0 ; home X axis\nM84 ; disable motors\nM140 S0; turn off bed
extruder_clearance_height = 20
extruder_clearance_radius = 20
extrusion_axis = E
extrusion_multiplier = 1
extrusion_width_ratio = 0
fan_always_on = 0
fan_below_layer_time = 60
filament_diameter = 2.75
fill_angle = 45
fill_density = 0.3
fill_pattern = rectilinear
first_layer_bed_temperature = 95
first_layer_height_ratio = 1
first_layer_temperature = 230
g0 = 0
gcode_arcs = 0
gcode_comments = 0
gcode_flavor = reprap
infill_acceleration = 50
infill_every_layers = 1
infill_speed = 75
layer_gcode =
layer_height = 0.2
max_fan_speed = 75
min_fan_speed = 50
min_print_speed = 10
notes =
nozzle_diameter = 0.5
output_filename_format = [input_filename_base].gcode
perimeter_acceleration = 25
perimeter_speed = 75
perimeters = 2
post_process =
print_center = 70,70
randomize_start = 1
retract_before_travel = 2
retract_length = 1
retract_lift = 0.2
retract_restart_extra = 0
retract_speed = 30
rotate = 0
scale = 1
skirt_distance = 6
skirt_height = 1
skirts = 1
slowdown_below_layer_time = 15
small_perimeter_speed = 50
solid_fill_pattern = rectilinear
solid_infill_speed = 75
solid_layers = 2
start_gcode = G28 ; home all axes\nM92 X63 ; calibrate X\nM92 Y63 ; calibrate Y\nM92 Z2256 ; calibrate Z\nM92 E555 ; calibrate E
support_material = 1
support_material_tool = 0
temperature = 220
threads = 8
travel_speed = 195
use_relative_e_distances = 0
z_offset = 0.10
./slic3r.pl --load config_bulldog.ini --scale 150 --rotate 45 ../stl/BulldogwithPlatform_fixed.stl
Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment