Custom timelapse script for CURA postprocessing plugin

README.md

MOVED TO -> https://github.com/simonjamain/CustomTimelapseCuraPlugin

So my expermental program is working also on an Ultimaker 5. Good to know. To get the image I use an http request of the web stream. I dont know how the ultituner works but if you get the image on the web view, everything should work normaly. There is no configuration currrently to change the connection. You can use the existing connection by changing the camera. The internal camera is connected by microUSB. Just use this connecton to a different camera and this should also work. I rewire this cable back and out of the case threw the bottom of the case.

@Flying-Suricate Do you know if I can connect a DSLR to the printer?

Hi.
I already used this and its great thanks!
but I have a problem here.
My printer is Creality K1 and the print speed that I using is 300mm/s
whit this script, after each layer the printer will go the shutter position by a very slow speed. how can I add a speed like "Return speed" that you already written it ?

I dont know why It does not retreat the old Speed. I will look it up. It could take some time.

I dont know why It does not retreat the old Speed. I will look it up. It could take some time.

Please take a look at this video.

71620424513__FFA43DB3-8308-4F67-9468-A15F47FE4D2C.MOV

And here is the result

Hi. I already used this and its great thanks! but I have a problem here. My printer is Creality K1 and the print speed that I using is 300mm/s whit this script, after each layer the printer will go the shutter position by a very slow speed. how can I add a speed like "Return speed" that you already written it ?

It seams the 3000000 mm/m get ignored on your machine. Maybe it is too high and then it uses its standard speed. You could try to set the first Gcode line something like: G0 X15 F7000. Maybe this will work for you.