Skip to content

Instantly share code, notes, and snippets.

@simonsso

simonsso/boot.log Secret

Created October 29, 2020 09:00
Show Gist options
  • Star 0 You must be signed in to star a gist
  • Fork 0 You must be signed in to fork a gist
  • Save simonsso/0ef180d3dd6a5b117dea1c669c33420e to your computer and use it in GitHub Desktop.
Save simonsso/0ef180d3dd6a5b117dea1c669c33420e to your computer and use it in GitHub Desktop.
Download ZIP
boot.log
Raw
boot.log
Download Finished
Handling Cmd: flash:super
Wrote 2621440 blocks, expected to write 2621440 blocks
flash image status: Success
Handling Cmd: download:19866c8c
Download Finished
Handling Cmd: flash:super
Wrote 2621440 blocks, expected to write 2621440 blocks
flash image status: Success
Handling Cmd: getvar:has-slot:userdata
Handling Cmd: getvar:max-download-size
Handling Cmd: getvar:is-logical:userdata
Handling Cmd: download:0002d19c
Download Finished
Handling Cmd: flash:userdata
Wrote 5242880 blocks, expected to write 5242880 blocks
flash image status: Success
Handling Cmd: reboot
rebooting the device
BDS: LogFs sync skipped, Unsupported
App Log Flush : 0 ms
Exit BS [63557] UEFI End
�
Format: Log Type - Time(microsec) - Message - Optional Info
Log Type: B - Since Boot(Power On Reset), D - Delta, S - Statistic
S - QC_IMAGE_VERSION_STRING=BOOT.XF.2.0-00371-SDM845LZB-1
S - IMAGE_VARIANT_STRING=SDM845LA
S - OEM_IMAGE_VERSION_STRING=TSBJ-FA-PC-02170
S - Boot Interface: UFS
S - Secure Boot: Off
S - Boot Config @ 0x00786070 = 0x000000c1
S - JTAG ID @ 0x00786130 = 0x2008e0e1
S - OEM ID @ 0x00786138 = 0x00000000
S - Serial Number @ 0x00784138 = 0x8a6e6bc2
S - OEM Config Row 0 @ 0x00784188 = 0x0000000400000000
S - OEM Config Row 1 @ 0x00784190 = 0x0000000000000000
S - Feature Config Row 0 @ 0x007841a0 = 0x0050200080000400
S - Feature Config Row 1 @ 0x007841a8 = 0xe000ffff00007fff
S - Core 0 Frequency, 1516 MHz
S - PBL Patch Ver: 1
S - PBL freq: 600 MHZ
B - 94 - PBL, Start
B - 5277 - bootable_media_detect_entry
B - 44039 - bootable_media_detect_success
B - 44415 - elf_loader_entry
B - 45026 - auth_hash_seg_entry
B - 45227 - auth_hash_seg_exit
B - 51193 - elf_segs_hash_verify_entry
B - 57931 - elf_segs_hash_verify_exit
B - 58560 - auth_xbl_sec_hash_seg_entry
B - 65931 - auth_xbl_sec_hash_seg_exit
B - 65933 - xbl_sec_segs_hash_verify_entry
B - 66690 - xbl_sec_segs_hash_verify_exit
B - 66715 - PBL, End
B - 81984 - SBL1, Start
B - 204716 - boot_flash_init, Start
D - 0 - boot_flash_init, Delta
B - 208681 - xblconfig_init, Start
D - 518 - Auth Metadata
D - 138470 - xblconfig_init, Delta
B - 352122 - sbl1_ddr_set_default_params, Start
D - 1525 - sbl1_ddr_set_default_params, Delta
B - 360113 - boot_config_data_table_init, Start
B - 364719 - CDT not programmed, using default
D - 4544 - boot_config_data_table_init, Delta - (54 Bytes)
B - 379267 - CDT Version:3,Platform ID:8,Major ID:1,Minor ID:0,Subtype:0
B - 384971 - pm_device_init, Start
B - 1464579 - PM: PON REASON: PM0=0x8000028000000021:0x0 PM1=0x8000088000000020:0x0 PM2=0x8000088000000020:0x0
B - 1524756 - PM: SET_VAL:Skip
D - 1140303 - pm_device_init, Delta
B - 1527745 - pm_driver_init, Start
D - 5307 - pm_driver_init, Delta
B - 1536590 - PM: Trigger FG IMA Reset
B - 1540128 - PM: Trigger FG IMA Reset.Completed
B - 1549339 - PM: EntryVbat: 4218; EntrySOC: -1
B - 1549369 - PM: ADSP result: 0
B - 1553944 - PM: Manually set ICL 500mA
B - 1557025 - PM: BATT TEMP: 25 DegC
B - 1561051 - vsense_init, Start
D - 0 - vsense_init, Delta
B - 1594631 - sbl1_ddr_set_params, Start
B - 1596461 - Pre_DDR_clock_init, Start
D - 91 - Pre_DDR_clock_init, Delta
D - 7686 - sbl1_ddr_set_params, Delta
B - 1606069 - sbl1_ddr_init, Start
D - 16104 - sbl1_ddr_init, Delta
B - 1626046 - DSF version = 253.10, DSF SHRM version = 173.3
B - 1629371 - Manufacturer ID = 6, Device Type = 7
B - 1634983 - Rank 0 size = 4096 MB, Rank 1 size = 0 MB
B - 1639924 - do_ddr_training, Start
B - 1646512 - Frequency = 1355 MHz
D - 3599 - do_ddr_training, Delta
B - 1654991 - pImem Init Start
D - 9729 - pImem Init End, Delta
B - 1666581 - clock_init, Start
D - 213 - clock_init, Delta
B - 1671613 - Image Load, Start
D - 2898 - APDP Image Loaded, Delta - (0 Bytes)
B - 1677713 - usb: UFS Serial - a7ff5045
B - 1682349 - usb: chgr - SDP_CHARGER
B - 1686497 - usb: qusb2_1: hstx , 0x5
B - 1689974 - usb: PLL1 locked , 0x5
B - 1694092 - PM: 0: PON=0x21:PON1:HARD_RESET: ON=0x80:PON_SEQ: POFF=0x2:PS_HOLD: OFF=0x80:POFF_SEQ
B - 1702693 - PM: 1: PON=0x20:PON1: ON=0x80:PON_SEQ: POFF=0x8:GP1: OFF=0x80:POFF_SEQ
B - 1711721 - PM: 2: PON=0x20:PON1: ON=0x80:PON_SEQ: POFF=0x8:GP1: OFF=0x80:POFF_SEQ
B - 1719376 - PM: SMEM Chgr Info Write Success
B - 1726544 - Image Load, Start
D - 427 - Auth Metadata
D - 10065 - Segments hash check
D - 19520 - AOP Image Loaded, Delta - (178808 Bytes)
B - 1749327 - Image Load, Start
D - 366 - Auth Metadata
D - 397 - Segments hash check
D - 10858 - QSEE Dev Config Image Loaded, Delta - (33720 Bytes)
B - 1769030 - Image Load, Start
D - 3874 - Auth Metadata
D - 10614 - Segments hash check
D - 34130 - QSEE Image Loaded, Delta - (2035952 Bytes)
B - 1806393 - Image Load, Start
D - 152 - SEC Image Loaded, Delta - (4096 Bytes)
B - 1814811 - Image Load, Start
D - 397 - Auth Metadata
D - 2410 - Segments hash check
D - 17202 - QHEE Image Loaded, Delta - (380480 Bytes)
B - 1835429 - Image Load, Start
D - 5002 - STI Image Loaded, Delta - (0 Bytes)
B - 1843725 - Image Load, Start
D - 366 - Auth Metadata
D - 763 - Segments hash check
D - 10217 - ABL Image Loaded, Delta - (146000 Bytes)
B - 1857297 - Image Load, Start
D - 427 - Auth Metadata
D - 9089 - Segments hash check
D - 32879 - APPSBL Image Loaded, Delta - (2097152 Bytes)
B - 1930619 - SBL1, End
D - 1848666 - SBL1, Delta
S - Flash Throughput, 121000 KB/s (4948646 Bytes, 40676 us)
S - DDR Frequency, 1353 MHz
UEFI Start [ 2275] SEC
ASLR : On
DEP : On
Timer Delta : +1 mS
RAM Entry 0 : Base 0x0000000080000000 Size 0x00000000FDFA0000
UEFI Ver : 5.0.190528.BOOT.XF.2.0-00371-SDM845LZB-1
Build Info : 64b May 28 2019 11:21:44
Boot Device : UFS
PROD Mode : TRUE
Retail : TRUE
PM0: 20, PM1: 21, PM2: 24,
MDDPlatform preferd display VerticalActive : 0x438
not panel detected, use defualt panel !
DisplayDxe: Resolution 1920x1080 (1 intf)
Render Splash [ 2989]
-----------------------------
Platform Init [ 3058] BDS
Platform : MTP
Chip Name : SDA845
Chip Ver : 2.1
Core 0 Freq: 1612 MHz
-----------------------------
UEFI Total : 798 ms
POST Time [ 3073] OS Loader
Loader Build Info: Dec 10 2019 01:42:45
VB: RWDeviceState: Succeed using devinfo!
Press <Down> to enter fastboot, <Up> to enter recovery, or <ESC> to enter EmergencyDLOAD
KeyPress:0, BootReason:0
Fastboot=0, Recovery:0
GetVmData: making ScmCall to get HypInfo
GetVmData: No Vm data present! Status = (0x3)
VM Hyp calls not present
A/B retry count NOT decremented
Booting Into Mission Mode
Loading Image Start : 3292 ms
Loading Image Done : 3292 ms
Total Image Read size : 4096 Bytes
Loading Image Start : 3292 ms
Loading Image Done : 3332 ms
Total Image Read size : 21626880 Bytes
No dtbo partition is found, Skip dtbo
GetVmData: making ScmCall to get HypInfo
GetVmData: No Vm data present! Status = (0x3)
No Ffbm cookie found, ignore: Not Found
Memory Base Address: 0x80000000
Decompressing kernel image start: 3332 ms
Decompressing kernel image done: 3621 ms
BootLinux: failed to get dtbo image
DTB offset is incorrect, kernel image does not have appended DTB
Error: Device Tree blob not found
Cmdline: earlycon firmware_class.path=/vendor/firmware/ androidboot.hardware=db845c init=/init androidboot.boot_devices=soc@0/1d84000.ufshc printk.devkmsg=on deferred_probe_timeout=30 buildvariant=userdebug root=/dev/sda2 androidboot.bootdevice=1d84000.uf
RAM Partitions
Add Base: 0x0000000080000000 Available Length: 0x00000000FDFA0000
WARNING: Unsupported EFI_RAMPARTITION_PROTOCOL
ERROR: Could not get splash memory region node
kaslr-Seed is added to chosen node
Shutting Down UEFI Boot Services: 3627 ms
BDS: LogFs sync skipped, Unsupported
App Log Flush : 57 ms
Exit BS [ 3689] UEFI End
[ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x517f803c]
[ 0.000000] Linux version 5.7.0-rc3-00159-g7cb801611066 (simson@deskmini) (gcc version 7.4.1 20181213 [linaro-7.4-2019.02 revision 56ec6f6b99cc167ff0c2f8e1a2eed33b1edc85d4] (Linaro GCC 7.4-2019.02), GNU ld (Linaro_Binutils-2019.02) 2.28.2.20170706) #10 SMP PREEMPT Wed Oct 28 19:07:39 JST 2020
[ 0.000000] Machine model: Thundercomm Dragonboard 845c
[ 0.000000] efi: UEFI not found.
[ 0.000000] cma: Reserved 32 MiB at 0x00000000fe000000
[ 0.000000] earlycon: qcom_geni0 at MMIO 0x0000000000a84000 (options '115200n8')
[ 0.000000] printk: bootconsole [qcom_geni0] enabled
[ 0.000000] NUMA: No NUMA configuration found
[ 0.000000] NUMA: Faking a node at [mem 0x0000000080000000-0x000000017df9ffff]
[ 0.000000] NUMA: NODE_DATA [mem 0x17d7b1100-0x17d7b2fff]
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000080000000-0x00000000bfffffff]
[ 0.000000] DMA32 [mem 0x00000000c0000000-0x00000000ffffffff]
[ 0.000000] Normal [mem 0x0000000100000000-0x000000017df9ffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000080000000-0x00000000856fffff]
[ 0.000000] node 0: [mem 0x0000000085d00000-0x0000000085dfffff]
[ 0.000000] node 0: [mem 0x0000000085f00000-0x0000000085fbffff]
[ 0.000000] node 0: [mem 0x0000000089100000-0x000000008aafffff]
[ 0.000000] node 0: [mem 0x000000008c417000-0x000000008c4fffff]
[ 0.000000] node 0: [mem 0x0000000097c00000-0x000000017df9ffff]
[ 0.000000] Zeroed struct page in unavailable ranges: 608 pages
[ 0.000000] Initmem setup node 0 [mem 0x0000000080000000-0x000000017df9ffff]
[ 0.000000] psci: probing for conduit method from DT.
[ 0.000000] psci: PSCIv1.1 detected in firmware.
[ 0.000000] psci: Using standard PSCI v0.2 function IDs
[ 0.000000] psci: MIGRATE_INFO_TYPE not supported.
[ 0.000000] psci: SMC Calling Convention v1.0
[ 0.000000] psci: OSI mode supported.
[ 0.000000] percpu: Embedded 23 pages/cpu s53912 r8192 d32104 u94208
[ 0.000000] Detected VIPT I-cache on CPU0
[ 0.000000] CPU features: detected: GIC system register CPU interface
[ 0.000000] CPU features: kernel page table isolation forced ON by KASLR
[ 0.000000] CPU features: detected: Kernel page table isolation (KPTI)
[ 0.000000] CPU features: detected: Hardware dirty bit management
[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 957419
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: earlycon firmware_class.path=/vendor/firmware/ androidboot.hardware=db845c init=/init androidboot.boot_devices=soc@0/1d84000.ufshc printk.devkmsg=on deferred_probe_timeout=30 buildvariant=userdebug root=/dev/sda2 androidboot.bootdevice=1d84000.ufshc androidboot.serialno=a7ff5045 androidboot.baseband=msm msm_drm.dsi_display0=dsi_lt9611_1080_video_display: androidboot.slot_suffix=_a skip_initramfs rootwait ro init=/init
[ 0.000000] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes, linear)
[ 0.000000] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes, linear)
[ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
[ 0.000000] software IO TLB: mapped [mem 0xbbfff000-0xbffff000] (64MB)
[ 0.000000] Memory: 3665960K/3890468K available (17724K kernel code, 2660K rwdata, 9940K rodata, 6656K init, 508K bss, 191740K reserved, 32768K cma-reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[ 0.000000] rcu: Preemptible hierarchical RCU implementation.
[ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=8.
[ 0.000000] Tasks RCU enabled.
[ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
[ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8
[ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
[ 0.000000] GICv3: 768 SPIs implemented
[ 0.000000] GICv3: 0 Extended SPIs implemented
[ 0.000000] GICv3: Distributor has no Range Selector support
[ 0.000000] GICv3: 16 PPIs implemented
[ 0.000000] GICv3: CPU0: found redistributor 0 region 0:0x0000000017a60000
[ 0.000000] ITS: No ITS available, not enabling LPIs
[ 0.000000] random: get_random_bytes called from start_kernel+0x2b0/0x488 with crng_init=0
[ 0.000000] arch_timer: cp15 and mmio timer(s) running at 19.20MHz (virt/virt).
[ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x46d987e47, max_idle_ns: 440795202767 ns
[ 0.000003] sched_clock: 56 bits at 19MHz, resolution 52ns, wraps every 4398046511078ns
[ 0.008442] Console: colour dummy device 80x25
[ 0.012938] printk: console [tty0] enabled
[ 0.017088] printk: bootconsole [qcom_geni0] disabled
[ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x517f803c]
[ 0.000000] Linux version 5.7.0-rc3-00159-g7cb801611066 (simson@deskmini) (gcc version 7.4.1 20181213 [linaro-7.4-2019.02 revision 56ec6f6b99cc167ff0c2f8e1a2eed33b1edc85d4] (Linaro GCC 7.4-2019.02), GNU ld (Linaro_Binutils-2019.02) 2.28.2.20170706) #10 SMP PREEMPT Wed Oct 28 19:07:39 JST 2020
[ 0.000000] Machine model: Thundercomm Dragonboard 845c
[ 0.000000] efi: UEFI not found.
[ 0.000000] cma: Reserved 32 MiB at 0x00000000fe000000
[ 0.000000] earlycon: qcom_geni0 at MMIO 0x0000000000a84000 (options '115200n8')
[ 0.000000] printk: bootconsole [qcom_geni0] enabled
[ 0.000000] NUMA: No NUMA configuration found
[ 0.000000] NUMA: Faking a node at [mem 0x0000000080000000-0x000000017df9ffff]
[ 0.000000] NUMA: NODE_DATA [mem 0x17d7b1100-0x17d7b2fff]
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000080000000-0x00000000bfffffff]
[ 0.000000] DMA32 [mem 0x00000000c0000000-0x00000000ffffffff]
[ 0.000000] Normal [mem 0x0000000100000000-0x000000017df9ffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000080000000-0x00000000856fffff]
[ 0.000000] node 0: [mem 0x0000000085d00000-0x0000000085dfffff]
[ 0.000000] node 0: [mem 0x0000000085f00000-0x0000000085fbffff]
[ 0.000000] node 0: [mem 0x0000000089100000-0x000000008aafffff]
[ 0.000000] node 0: [mem 0x000000008c417000-0x000000008c4fffff]
[ 0.000000] node 0: [mem 0x0000000097c00000-0x000000017df9ffff]
[ 0.000000] Zeroed struct page in unavailable ranges: 608 pages
[ 0.000000] Initmem setup node 0 [mem 0x0000000080000000-0x000000017df9ffff]
[ 0.000000] psci: probing for conduit method from DT.
[ 0.000000] psci: PSCIv1.1 detected in firmware.
[ 0.000000] psci: Using standard PSCI v0.2 function IDs
[ 0.000000] psci: MIGRATE_INFO_TYPE not supported.
[ 0.000000] psci: SMC Calling Convention v1.0
[ 0.000000] psci: OSI mode supported.
[ 0.000000] percpu: Embedded 23 pages/cpu s53912 r8192 d32104 u94208
[ 0.000000] Detected VIPT I-cache on CPU0
[ 0.000000] CPU features: detected: GIC system register CPU interface
[ 0.000000] CPU features: kernel page table isolation forced ON by KASLR
[ 0.000000] CPU features: detected: Kernel page table isolation (KPTI)
[ 0.000000] CPU features: detected: Hardware dirty bit management
[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 957419
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: earlycon firmware_class.path=/vendor/firmware/ androidboot.hardware=db845c init=/init androidboot.boot_devices=soc@0/1d84000.ufshc printk.devkmsg=on deferred_probe_timeout=30 buildvariant=userdebug root=/dev/sda2 androidboot.bootdevice=1d84000.ufshc androidboot.serialno=a7ff5045 androidboot.baseband=msm msm_drm.dsi_display0=dsi_lt9611_1080_video_display: androidboot.slot_suffix=_a skip_initramfs rootwait ro init=/init
[ 0.000000] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes, linear)
[ 0.000000] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes, linear)
[ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
[ 0.000000] software IO TLB: mapped [mem 0xbbfff000-0xbffff000] (64MB)
[ 0.000000] Memory: 3665960K/3890468K available (17724K kernel code, 2660K rwdata, 9940K rodata, 6656K init, 508K bss, 191740K reserved, 32768K cma-reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[ 0.000000] rcu: Preemptible hierarchical RCU implementation.
[ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=8.
[ 0.000000] Tasks RCU enabled.
[ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
[ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8
[ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
[ 0.000000] GICv3: 768 SPIs implemented
[ 0.000000] GICv3: 0 Extended SPIs implemented
[ 0.000000] GICv3: Distributor has no Range Selector support
[ 0.000000] GICv3: 16 PPIs implemented
[ 0.000000] GICv3: CPU0: found redistributor 0 region 0:0x0000000017a60000
[ 0.000000] ITS: No ITS available, not enabling LPIs
[ 0.000000] random: get_random_bytes called from start_kernel+0x2b0/0x488 with crng_init=0
[ 0.000000] arch_timer: cp15 and mmio timer(s) running at 19.20MHz (virt/virt).
[ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x46d987e47, max_idle_ns: 440795202767 ns
[ 0.000003] sched_clock: 56 bits at 19MHz, resolution 52ns, wraps every 4398046511078ns
[ 0.008442] Console: colour dummy device 80x25
[ 0.012938] printk: console [tty0] enabled
[ 0.017088] printk: bootconsole [qcom_geni0] disabled
[ 0.022278] Calibrating delay loop (skipped), value calculated using timer frequency.. 38.40 BogoMIPS (lpj=76800)
[ 0.022296] pid_max: default: 32768 minimum: 301
[ 0.022373] LSM: Security Framework initializing
[ 0.022434] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes, linear)
[ 0.022452] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes, linear)
[ 0.023998] rcu: Hierarchical SRCU implementation.
[ 0.029984] EFI services will not be available.
[ 0.030295] smp: Bringing up secondary CPUs ...
[ 0.031843] Detected VIPT I-cache on CPU1
[ 0.031890] GICv3: CPU1: found redistributor 100 region 0:0x0000000017a80000
[ 0.031953] CPU1: Booted secondary processor 0x0000000100 [0x517f803c]
[ 0.033472] Detected VIPT I-cache on CPU2
[ 0.033504] GICv3: CPU2: found redistributor 200 region 0:0x0000000017aa0000
[ 0.033554] CPU2: Booted secondary processor 0x0000000200 [0x517f803c]
[ 0.035184] Detected VIPT I-cache on CPU3
[ 0.035211] GICv3: CPU3: found redistributor 300 region 0:0x0000000017ac0000
[ 0.035257] CPU3: Booted secondary processor 0x0000000300 [0x517f803c]
[ 0.037487] ARM_SMCCC_ARCH_WORKAROUND_1 missing from firmware
[ 0.037495] Detected VIPT I-cache on CPU4
[ 0.037521] GICv3: CPU4: found redistributor 400 region 0:0x0000000017ae0000
[ 0.037565] CPU4: Booted secondary processor 0x0000000400 [0x516f802d]
[ 0.039552] Detected VIPT I-cache on CPU5
[ 0.039579] GICv3: CPU5: found redistributor 500 region 0:0x0000000017b00000
[ 0.039624] CPU5: Booted secondary processor 0x0000000500 [0x516f802d]
[ 0.041779] Detected VIPT I-cache on CPU6
[ 0.041809] GICv3: CPU6: found redistributor 600 region 0:0x0000000017b20000
[ 0.041854] CPU6: Booted secondary processor 0x0000000600 [0x516f802d]
[ 0.044173] Detected VIPT I-cache on CPU7
[ 0.044203] GICv3: CPU7: found redistributor 700 region 0:0x0000000017b40000
[ 0.044248] CPU7: Booted secondary processor 0x0000000700 [0x516f802d]
[ 0.044326] smp: Brought up 1 node, 8 CPUs
[ 0.044463] SMP: Total of 8 processors activated.
[ 0.044473] CPU features: detected: Privileged Access Never
[ 0.044480] CPU features: detected: LSE atomic instructions
[ 0.044489] CPU features: detected: User Access Override
[ 0.044497] CPU features: detected: 32-bit EL0 Support
[ 0.044504] CPU features: detected: Common not Private translations
[ 0.044512] CPU features: detected: RAS Extension Support
[ 0.044520] CPU features: detected: Data cache clean to the PoU not required for I/D coherence
[ 0.044530] CPU features: detected: CRC32 instructions
[ 0.070802] CPU: All CPU(s) started at EL1
[ 0.070852] alternatives: patching kernel code
[ 0.073842] devtmpfs: initialized
[ 0.084105] Registered cp15_barrier emulation handler
[ 0.084146] Registered setend emulation handler
[ 0.084159] KASLR enabled
[ 0.084467] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[ 0.084490] futex hash table entries: 2048 (order: 5, 131072 bytes, linear)
[ 0.085251] pinctrl core: initialized pinctrl subsystem
[ 0.086997] thermal_sys: Registered thermal governor 'step_wise'
[ 0.089134] DMI not present or invalid.
[ 0.089623] NET: Registered protocol family 16
[ 0.090832] DMA: preallocated 256 KiB pool for atomic allocations
[ 0.090847] audit: initializing netlink subsys (disabled)
[ 0.090966] audit: type=2000 audit(0.084:1): state=initialized audit_enabled=0 res=1
[ 0.092437] cpuidle: using governor menu
[ 0.092592] NET: Registered protocol family 42
[ 0.093020] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
[ 0.093222] ASID allocator initialised with 32768 entries
[ 0.094721] Serial: AMBA PL011 UART driver
[ 0.141833] qcom-cpufreq-hw 17d43000.cpufreq: CPUFreq HW driver failed to register
[ 0.152504] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
[ 0.152522] HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages
[ 0.152534] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[ 0.152544] HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages
[ 0.154552] cryptd: max_cpu_qlen set to 1000
[ 0.158237] ACPI: Interpreter disabled.
[ 0.173205] VBAT: supplied by DC12V
[ 0.173409] VBAT_SOM: supplied by DC12V
[ 0.173529] PCIE0_1.05V: supplied by VBAT
[ 0.173562] CAM3_AVDD_2V8: supplied by VBAT
[ 0.173604] VLDO_3V3: supplied by VBAT
[ 0.173718] VDC_3V3: supplied by DC12V
[ 0.173906] VDC_5V: supplied by DC12V
[ 0.174015] LT9611_3V3: supplied by VDC_3V3
[ 0.174202] LT9611_1V8: supplied by VDC_5V
[ 0.174234] V5P0_HDMIOUT: supplied by VDC_5V
[ 0.174384] vph_pwr: supplied by VBAT_SOM
[ 0.175059] iommu: Default domain type: Translated
[ 0.175249] vgaarb: loaded
[ 0.175498] SCSI subsystem initialized
[ 0.175825] usbcore: registered new interface driver usbfs
[ 0.175860] usbcore: registered new interface driver hub
[ 0.175925] usbcore: registered new device driver usb
[ 0.176637] mc: Linux media interface: v0.10
[ 0.176663] videodev: Linux video capture interface: v2.00
[ 0.176705] pps_core: LinuxPPS API ver. 1 registered
[ 0.176714] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 0.176736] PTP clock support registered
[ 0.176867] EDAC MC: Ver: 3.0.0
[ 0.177601] qcom_scm: convention: smc arm 64
[ 0.178483] FPGA manager framework
[ 0.178555] Advanced Linux Sound Architecture Driver Initialized.
[ 0.178961] Bluetooth: Core ver 2.22
[ 0.178990] NET: Registered protocol family 31
[ 0.178999] Bluetooth: HCI device and connection manager initialized
[ 0.179012] Bluetooth: HCI socket layer initialized
[ 0.179026] Bluetooth: L2CAP socket layer initialized
[ 0.179043] Bluetooth: SCO socket layer initialized
[ 0.179676] clocksource: Switched to clocksource arch_sys_counter
[ 0.179811] VFS: Disk quotas dquot_6.6.0
[ 0.179866] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.180018] pnp: PnP ACPI: disabled
[ 0.185292] NET: Registered protocol family 2
[ 0.185794] tcp_listen_portaddr_hash hash table entries: 2048 (order: 3, 32768 bytes, linear)
[ 0.185852] TCP established hash table entries: 32768 (order: 6, 262144 bytes, linear)
[ 0.186028] TCP bind hash table entries: 32768 (order: 7, 524288 bytes, linear)
[ 0.186400] TCP: Hash tables configured (established 32768 bind 32768)
[ 0.186484] UDP hash table entries: 2048 (order: 4, 65536 bytes, linear)
[ 0.186568] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes, linear)
[ 0.186755] NET: Registered protocol family 1
[ 0.187070] RPC: Registered named UNIX socket transport module.
[ 0.187081] RPC: Registered udp transport module.
[ 0.187089] RPC: Registered tcp transport module.
[ 0.187098] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 0.187484] PCI: CLS 0 bytes, default 64
[ 0.187600] Unpacking initramfs...
[ 0.544629] Freeing initrd memory: 7616K
[ 0.545906] hw perfevents: enabled with armv8_pmuv3 PMU driver, 7 counters available
[ 0.546392] kvm [1]: HYP mode not available
[ 0.553293] Initialise system trusted keyrings
[ 0.553414] workingset: timestamp_bits=44 max_order=20 bucket_order=0
[ 0.558078] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 0.558550] NFS: Registering the id_resolver key type
[ 0.558574] Key type id_resolver registered
[ 0.558582] Key type id_legacy registered
[ 0.558596] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
[ 0.558763] 9p: Installing v9fs 9p2000 file system support
[ 0.571031] Key type asymmetric registered
[ 0.571043] Asymmetric key parser 'x509' registered
[ 0.571078] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 244)
[ 0.571092] io scheduler mq-deadline registered
[ 0.571101] io scheduler kyber registered
[ 0.584031] EINJ: ACPI disabled.
[ 0.601365] smps3: supplied by vph_pwr
[ 0.601411] smps3: Setting 1352000-1352000uV
[ 0.601564] smps5: supplied by vph_pwr
[ 0.601592] smps5: Setting 1904000-2040000uV
[ 0.601719] smps7: supplied by vph_pwr
[ 0.601747] smps7: Setting 900000-1028000uV
[ 0.601891] ldo1: supplied by smps7
[ 0.601916] ldo1: Setting 880000-880000uV
[ 0.602081] ldo5: supplied by smps7
[ 0.602112] ldo5: Setting 800000-800000uV
[ 0.602305] ldo12: supplied by smps5
[ 0.602332] ldo12: Setting 1800000-1800000uV
[ 0.602490] ldo7: supplied by smps5
[ 0.602516] ldo7: Setting 1800000-1800000uV
[ 0.602706] ldo13: Setting 1800000-2960000uV
[ 0.602901] ldo17: supplied by smps3
[ 0.602941] ldo17: Setting 1304000-1304000uV
[ 0.603109] ldo20: Setting 2960000-2968000uV
[ 0.603286] ldo21: Setting 2960000-2968000uV
[ 0.603462] ldo24: Setting 3088000-3088000uV
[ 0.603642] ldo25: Setting 3300000-3312000uV
[ 0.603819] ldo26: supplied by smps3
[ 0.603847] ldo26: Setting 1200000-1200000uV
[ 0.604041] lvs1: supplied by vreg_s4a_1p8
[ 0.604802] lvs2: supplied by vreg_s4a_1p8
[ 0.605605] bob: supplied by vph_pwr
[ 0.605631] bob: Setting 3312000-3600000uV
[ 0.610251] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.612457] SuperH (H)SCI(F) driver initialized
[ 0.613085] msm_serial: driver initialized
[ 0.613431] 898000.serial: ttyHS0 at MMIO 0x898000 (irq = 146, base_baud = 0) is a MSM
[ 0.613656] serial serial0: tty port ttyHS0 registered
[ 0.613868] a84000.serial: ttyMSM0 at MMIO 0xa84000 (irq = 147, base_baud = 0) is a MSM
[ 1.919976] printk: console [ttyMSM0] enabled
[ 1.926112] arm-smmu 5040000.iommu: probing hardware configuration...
[ 1.932637] arm-smmu 5040000.iommu: SMMUv2 with:
[ 1.937356] arm-smmu 5040000.iommu: stage 1 translation
[ 1.942740] arm-smmu 5040000.iommu: address translation ops
[ 1.948473] arm-smmu 5040000.iommu: non-coherent table walk
[ 1.954204] arm-smmu 5040000.iommu: (IDR0.CTTW overridden by FW configuration)
[ 1.961599] arm-smmu 5040000.iommu: stream matching with 5 register groups
[ 1.968671] arm-smmu 5040000.iommu: 5 context banks (0 stage-2 only)
[ 1.975211] arm-smmu 5040000.iommu: Supported page sizes: 0x63315000
[ 1.981726] arm-smmu 5040000.iommu: Stage-1: 48-bit VA -> 36-bit IPA
[ 1.990337] arm-smmu 15000000.iommu: probing hardware configuration...
[ 1.996947] arm-smmu 15000000.iommu: SMMUv2 with:
[ 2.001734] arm-smmu 15000000.iommu: stage 1 translation
[ 2.007208] arm-smmu 15000000.iommu: non-coherent table walk
[ 2.013031] arm-smmu 15000000.iommu: (IDR0.CTTW overridden by FW configuration)
[ 2.020512] arm-smmu 15000000.iommu: stream matching with 76 register groups
[ 2.027742] arm-smmu 15000000.iommu: 45 context banks (0 stage-2 only)
[ 2.034453] arm-smmu 15000000.iommu: Supported page sizes: 0x61311000
[ 2.041058] arm-smmu 15000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA
[ 2.052206] [drm] Initialized vgem 1.0.0 20120112 for vgem on minor 0
[ 2.060842] adreno 5000000.gpu: Adding to iommu group 0
[ 2.066671] msm ae00000.mdss: Adding to iommu group 1
[ 2.068456] arm-smmu 15000000.iommu: Unhandled context fault: fsr=0x402, iova=0x9d400000, fsynr=0x1d0020, cbfrsynra=0x880, cb=0
[ 2.085685] arm-smmu 15000000.iommu: Unhandled context fault: fsr=0x402, iova=0x9d400000, fsynr=0x1d0020, cbfrsynra=0x880, cb=0
[ 2.086311] arm-smmu 15000000.iommu: Unhandled context fault: fsr=0x402, iova=0x9d415400, fsynr=0x1d0020, cbfrsynra=0xc88, cb=0
[ 2.110171] arm-smmu 15000000.iommu: Unhandled context fault: fsr=0x402, iova=0x9d73e700, fsynr=0x1d0020, cbfrsynra=0xc88, cb=0
[ 2.110194] arm-smmu 15000000.iommu: Unhandled context fault: fsr=0x402, iova=0x9d741a00, fsynr=0x1d0020, cbfrsynra=0x880, cb=0
[ 2.110215] arm-smmu 15000000.iommu: Unhandled context fault: fsr=0x402, iova=0x9d744800, fsynr=0x1d0020, cbfrsynra=0x880, cb=0
[ 2.110237] arm-smmu 15000000.iommu: Unhandled context fault: fsr=0x402, iova=0x9d746f00, fsynr=0x1d0020, cbfrsynra=0xc88, cb=0
[ 2.110258] arm-smmu 15000000.iommu: Unhandled context fault: fsr=0x402, iova=0x9d749b00, fsynr=0x1d0020, cbfrsynra=0x880, cb=0
[ 2.110278] arm-smmu 15000000.iommu: Unhandled context fault: fsr=0x402, iova=0x9d74c500, fsynr=0x1d0020, cbfrsynra=0xc88, cb=0
[ 2.110299] arm-smmu 15000000.iommu: Unhandled context fault: fsr=0x402, iova=0x9d74ea00, fsynr=0x1d0020, cbfrsynra=0x880, cb=0
[ 2.113894] random: fast init done
[ 2.208325] msm ae00000.mdss: bound ae01000.mdp (ops dpu_ops)
[ 2.215290] msm_dsi ae94000.dsi: supply gdsc not found, using dummy regulator
[ 2.222985] msm_dsi_manager_register: failed to register mipi dsi host for DSI 0
[ 2.230567] msm ae00000.mdss: failed to bind ae94000.dsi (ops dsi_ops): -517
[ 2.237773] msm ae00000.mdss: master bind failed: -517
[ 2.250380] loop: module loaded
[ 2.254880] ufshcd-qcom 1d84000.ufshc: Adding to iommu group 2
[ 2.261244] ufshcd-qcom 1d84000.ufshc: ufshcd_populate_vreg: Unable to find vdd-hba-supply regulator, assuming enabled
[ 2.272200] ufshcd-qcom 1d84000.ufshc: ufshcd_populate_vreg: Unable to find vccq-supply regulator, assuming enabled
[ 2.282739] ufshcd-qcom 1d84000.ufshc: ufshcd_populate_vreg: Unable to find vccq2-supply regulator, assuming enabled
[ 2.293551] ldo20: supplied by bob
[ 2.297388] ufshcd-qcom 1d84000.ufshc: ufs_qcom_init: required phy device. hasn't probed yet. err = -517
[ 2.306971] ufshcd-qcom 1d84000.ufshc: ufshcd_variant_hba_init: variant qcom init failed err -517
[ 2.316088] ufshcd-qcom 1d84000.ufshc: Initialization failed
[ 2.321910] ufshcd-qcom 1d84000.ufshc: ufshcd_pltfrm_init() failed -517
[ 2.332197] spmi spmi-0: PMIC arbiter version v5 (0x50000000)
[ 2.348561] gpio gpiochip2: (c440000.spmi:pmic@2:gpios@c000): detected irqchip that is shared with multiple gpiochips: please fix the driver.
[ 2.362248] qcom,slim-ngd-ctrl 171c0000.slim: Adding to iommu group 3
[ 2.370375] libphy: Fixed MDIO Bus: probed
[ 2.374775] tun: Universal TUN/TAP device driver, 1.6
[ 2.380794] thunder_xcv, ver 1.0
[ 2.384125] thunder_bgx, ver 1.0
[ 2.387424] nicpf, ver 1.0
[ 2.390880] hclge is initializing
[ 2.394284] hns3: Hisilicon Ethernet Network Driver for Hip08 Family - version
[ 2.401590] hns3: Copyright (c) 2017 Huawei Corporation.
[ 2.407008] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
[ 2.412907] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
[ 2.418922] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.6.0-k
[ 2.425964] igb: Copyright (c) 2007-2014 Intel Corporation.
[ 2.431625] igbvf: Intel(R) Gigabit Virtual Function Network Driver - version 2.4.0-k
[ 2.439536] igbvf: Copyright (c) 2009 - 2012 Intel Corporation.
[ 2.445892] sky2: driver version 1.30
[ 2.450304] usbcore: registered new interface driver ath10k_usb
[ 2.456586] ath10k_snoc 18800000.wifi: Adding to iommu group 4
[ 2.463765] ldo25: supplied by bob
[ 2.469038] usbcore: registered new interface driver rt2500usb
[ 2.474974] usbcore: registered new interface driver rt73usb
[ 2.480729] usbcore: registered new interface driver rt2800usb
[ 2.486658] usbcore: registered new interface driver rtl8150
[ 2.492412] usbcore: registered new interface driver r8152
[ 2.497995] usbcore: registered new interface driver asix
[ 2.503488] usbcore: registered new interface driver ax88179_178a
[ 2.509826] VFIO - User Level meta-driver version: 0.3
[ 2.518954] dwc3 a600000.dwc3: Adding to iommu group 5
[ 2.527388] dwc3 a800000.dwc3: Adding to iommu group 6
[ 2.534029] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 2.540674] ehci-pci: EHCI PCI platform driver
[ 2.545215] ehci-platform: EHCI generic platform driver
[ 2.550663] ehci-orion: EHCI orion driver
[ 2.554845] ehci-exynos: EHCI Exynos driver
[ 2.559191] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 2.565455] ohci-pci: OHCI PCI platform driver
[ 2.569994] ohci-platform: OHCI generic platform driver
[ 2.575413] ohci-exynos: OHCI Exynos driver
[ 2.580109] usbcore: registered new interface driver usb-storage
[ 2.586262] usbcore: registered new interface driver usbserial_generic
[ 2.592879] usbserial: USB Serial support registered for generic
[ 2.602240] i2c /dev entries driver
[ 2.608703] VK: in lt9611_probe
[ 2.783676] VK: in lt9611_read_device_rev
[ 2.789038] lt9611 10-003b: LT9611 revision: 0xe1
[ 2.796988] geni_i2c a8c000.i2c: Bus frequency not specified, default to 100kHz.
[ 2.804951] geni_i2c a98000.i2c: Bus frequency not specified, default to 100kHz.
[ 2.814628] ov8856 16-0010: failed to get HW configuration: -517
[ 2.821165] qcom-camss ac65000.camss: Adding to iommu group 7
[ 2.827264] duplicated lane 1 in clock-lanes, using defaults
[ 2.833566] __video_try_fmt() width 1920
[ 2.838166] __video_try_fmt() height 1080
[ 2.842761] __video_try_fmt() num_planes 0
[ 2.847084] __video_try_fmt() field 0
[ 2.851412] __video_try_fmt() pixelformat UYVY 4:2:2 (0x59565955)
[ 2.857658] __video_try_fmt() looking for pixelformat: UYVY 4:2:2 (0x59565955)
[ 2.865049] __video_try_fmt() found pixelformat: UYVY 4:2:2 (0x59565955)
[ 2.872061] media_create_pad_link 1
[ 2.875602] media_create_pad_link 1.1
[ 2.879320] media_create_pad_link 1.2 sink=(____ptrval____)
[ 2.884955] media_create_pad_link 1.3
[ 2.888667] media_create_pad_link 1.4
[ 2.892379] media_create_pad_link 2
[ 2.895924] media_create_pad_link 3
[ 2.899462] media_create_pad_link 4
[ 2.903013] media_create_pad_link 5
[ 2.906558] media_create_pad_link 6
[ 2.910102] media_create_pad_link 7
[ 2.913651] media_create_pad_link 8
[ 2.917196] media_create_pad_link 9
[ 2.920743] media_create_pad_link done
[ 2.924567] __video_try_fmt() width 1920
[ 2.929154] __video_try_fmt() height 1080
[ 2.933739] __video_try_fmt() num_planes 0
[ 2.938062] __video_try_fmt() field 0
[ 2.942385] __video_try_fmt() pixelformat UYVY 4:2:2 (0x59565955)
[ 2.948642] __video_try_fmt() looking for pixelformat: UYVY 4:2:2 (0x59565955)
[ 2.956030] __video_try_fmt() found pixelformat: UYVY 4:2:2 (0x59565955)
[ 2.963001] media_create_pad_link 1
[ 2.966550] media_create_pad_link 1.1
[ 2.970263] media_create_pad_link 1.2 sink=(____ptrval____)
[ 2.975896] media_create_pad_link 1.3
[ 2.979601] media_create_pad_link 1.4
[ 2.983312] media_create_pad_link 2
[ 2.986856] media_create_pad_link 3
[ 2.990400] media_create_pad_link 4
[ 2.993948] media_create_pad_link 5
[ 2.997495] media_create_pad_link 6
[ 3.001039] media_create_pad_link 7
[ 3.004587] media_create_pad_link 8
[ 3.008131] media_create_pad_link 9
[ 3.011677] media_create_pad_link done
[ 3.015493] __video_try_fmt() width 1920
[ 3.020080] __video_try_fmt() height 1080
[ 3.024664] __video_try_fmt() num_planes 0
[ 3.028986] __video_try_fmt() field 0
[ 3.033309] __video_try_fmt() pixelformat UYVY 4:2:2 (0x59565955)
[ 3.039566] __video_try_fmt() looking for pixelformat: UYVY 4:2:2 (0x59565955)
[ 3.046953] __video_try_fmt() found pixelformat: UYVY 4:2:2 (0x59565955)
[ 3.053929] media_create_pad_link 1
[ 3.057478] media_create_pad_link 1.1
[ 3.061191] media_create_pad_link 1.2 sink=(____ptrval____)
[ 3.066823] media_create_pad_link 1.3
[ 3.070536] media_create_pad_link 1.4
[ 3.074248] media_create_pad_link 2
[ 3.077792] media_create_pad_link 3
[ 3.081336] media_create_pad_link 4
[ 3.084885] media_create_pad_link 5
[ 3.088429] media_create_pad_link 6
[ 3.091973] media_create_pad_link 7
[ 3.095515] media_create_pad_link 8
[ 3.099058] media_create_pad_link 9
[ 3.102602] media_create_pad_link done
[ 3.106427] __video_try_fmt() width 1920
[ 3.111051] __video_try_fmt() height 1080
[ 3.115638] __video_try_fmt() num_planes 0
[ 3.119991] __video_try_fmt() field 0
[ 3.124344] __video_try_fmt() pixelformat Y/CbCr 4:2:0 (0x3231564e)
[ 3.130775] __video_try_fmt() looking for pixelformat: Y/CbCr 4:2:0 (0x3231564e)
[ 3.138336] __video_try_fmt() found pixelformat: Y/CbCr 4:2:0 (0x3231564e)
[ 3.145479] media_create_pad_link 1
[ 3.149028] media_create_pad_link 1.1
[ 3.152742] media_create_pad_link 1.2 sink=(____ptrval____)
[ 3.158375] media_create_pad_link 1.3
[ 3.162086] media_create_pad_link 1.4
[ 3.165797] media_create_pad_link 2
[ 3.169341] media_create_pad_link 3
[ 3.172884] media_create_pad_link 4
[ 3.176433] media_create_pad_link 5
[ 3.179978] media_create_pad_link 6
[ 3.183515] media_create_pad_link 7
[ 3.187064] media_create_pad_link 8
[ 3.190608] media_create_pad_link 9
[ 3.194152] media_create_pad_link done
[ 3.197954] media_create_pad_link 1
[ 3.201497] media_create_pad_link 1.1
[ 3.205209] media_create_pad_link 1.2 sink=(____ptrval____)
[ 3.210841] media_create_pad_link 1.3
[ 3.214551] media_create_pad_link 1.4
[ 3.218262] media_create_pad_link 2
[ 3.221806] media_create_pad_link 3
[ 3.225350] media_create_pad_link 4
[ 3.228899] media_create_pad_link 5
[ 3.232443] media_create_pad_link 6
[ 3.235987] media_create_pad_link 7
[ 3.239530] media_create_pad_link 8
[ 3.243073] media_create_pad_link 9
[ 3.246616] media_create_pad_link done
[ 3.250418] media_create_pad_link 1
[ 3.253961] media_create_pad_link 1.1
[ 3.257673] media_create_pad_link 1.2 sink=(____ptrval____)
[ 3.263305] media_create_pad_link 1.3
[ 3.267016] media_create_pad_link 1.4
[ 3.270727] media_create_pad_link 2
[ 3.274271] media_create_pad_link 3
[ 3.277814] media_create_pad_link 4
[ 3.281363] media_create_pad_link 5
[ 3.284907] media_create_pad_link 6
[ 3.288450] media_create_pad_link 7
[ 3.292000] media_create_pad_link 8
[ 3.295538] media_create_pad_link 9
[ 3.299087] media_create_pad_link done
[ 3.302890] media_create_pad_link 1
[ 3.306433] media_create_pad_link 1.1
[ 3.310145] media_create_pad_link 1.2 sink=(____ptrval____)
[ 3.315777] media_create_pad_link 1.3
[ 3.319482] media_create_pad_link 1.4
[ 3.323193] media_create_pad_link 2
[ 3.326736] media_create_pad_link 3
[ 3.330280] media_create_pad_link 4
[ 3.333828] media_create_pad_link 5
[ 3.337372] media_create_pad_link 6
[ 3.340915] media_create_pad_link 7
[ 3.344463] media_create_pad_link 8
[ 3.348006] media_create_pad_link 9
[ 3.351544] media_create_pad_link done
[ 3.355345] media_create_pad_link 1
[ 3.358888] media_create_pad_link 1.1
[ 3.362600] media_create_pad_link 1.2 sink=(____ptrval____)
[ 3.368232] media_create_pad_link 1.3
[ 3.371943] media_create_pad_link 1.4
[ 3.375648] media_create_pad_link 2
[ 3.379191] media_create_pad_link 3
[ 3.382734] media_create_pad_link 4
[ 3.386282] media_create_pad_link 5
[ 3.389826] media_create_pad_link 6
[ 3.393369] media_create_pad_link 7
[ 3.396917] media_create_pad_link 8
[ 3.400461] media_create_pad_link 9
[ 3.404004] media_create_pad_link done
[ 3.407805] media_create_pad_link 1
[ 3.411342] media_create_pad_link 1.1
[ 3.415054] media_create_pad_link 1.2 sink=(____ptrval____)
[ 3.420686] media_create_pad_link 1.3
[ 3.424397] media_create_pad_link 1.4
[ 3.428108] media_create_pad_link 2
[ 3.431645] media_create_pad_link 3
[ 3.435189] media_create_pad_link 4
[ 3.438736] media_create_pad_link 5
[ 3.442280] media_create_pad_link 6
[ 3.445823] media_create_pad_link 7
[ 3.449371] media_create_pad_link 8
[ 3.452915] media_create_pad_link 9
[ 3.456458] media_create_pad_link done
[ 3.460574] usbcore: registered new interface driver uvcvideo
[ 3.466399] USB Video Class driver (1.1.1)
[ 3.470557] gspca_main: v2.14.0 registered
[ 3.476666] input: pm8941_pwrkey as /devices/platform/soc@0/c440000.spmi/spmi-0/0-00/c440000.spmi:pmic@0:pon@800/c440000.spmi:pmic@0:pon@800:pwrkey/input/input0
[ 3.492457] input: pm8941_pwrkey as /devices/platform/soc@0/c440000.spmi/spmi-0/0-00/c440000.spmi:pmic@0:pon@800/c440000.spmi:pmic@0:pon@800:resin/input/input1
[ 3.515633] Bluetooth: HCI UART driver ver 2.3
[ 3.520166] Bluetooth: HCI UART protocol H4 registered
[ 3.525369] Bluetooth: HCI UART protocol BCSP registered
[ 3.530775] Bluetooth: HCI UART protocol LL registered
[ 3.535993] Bluetooth: HCI UART protocol Three-wire (H5) registered
[ 3.542422] Bluetooth: HCI UART protocol Broadcom registered
[ 3.548188] Bluetooth: HCI UART protocol QCA registered
[ 3.554801] Bluetooth: hci0: setting up wcn399x
[ 3.559531] sdhci: Secure Digital Host Controller Interface driver
[ 3.565783] sdhci: Copyright(c) Pierre Ossman
[ 3.570683] Synopsys Designware Multimedia Card Interface Driver
[ 3.577876] sdhci-pltfm: SDHCI platform and OF driver helper
[ 3.585176] sdhci_msm 8804000.sdhci: Adding to iommu group 8
[ 3.591151] sdhci_msm 8804000.sdhci: Got CD GPIO
[ 3.595928] sdhci_msm 8804000.sdhci: TCXO clk not present (-2)
[ 3.602348] ldo21: supplied by bob
[ 3.605933] ldo13: supplied by bob
[ 3.647098] mmc0: SDHCI controller on 8804000.sdhci [8804000.sdhci] using ADMA 64-bit
[ 3.659657] ledtrig-cpu: registered to indicate activity on CPUs
[ 3.670197] usbcore: registered new interface driver usbhid
[ 3.675850] usbhid: USB HID core driver
[ 3.682711] remoteproc remoteproc0: 4080000.remoteproc is available
[ 3.689861] qcom_q6v5_pas remoteproc-adsp: supply cx not found, using dummy regulator
[ 3.697861] qcom_q6v5_pas remoteproc-adsp: supply px not found, using dummy regulator
[ 3.706686] remoteproc remoteproc1: remoteproc-adsp is available
[ 3.712890] remoteproc remoteproc1: Direct firmware load for qcom/sdm845/adsp.mdt failed with error -2
[ 3.722306] remoteproc remoteproc1: Falling back to sysfs fallback for: qcom/sdm845/adsp.mdt
[ 3.731065] qcom_q6v5_pas remoteproc-cdsp: supply cx not found, using dummy regulator
[ 3.739065] qcom_q6v5_pas remoteproc-cdsp: supply px not found, using dummy regulator
[ 3.744742] Bluetooth: hci0: QCA controller version 0x02140201
[ 3.752888] Bluetooth: hci0: QCA Downloading qca/crbtfw21.tlv
[ 3.758717] remoteproc remoteproc2: remoteproc-cdsp is available
[ 3.758759] bluetooth hci0: Direct firmware load for qca/crbtfw21.tlv failed with error -2
[ 3.764885] remoteproc remoteproc2: Direct firmware load for qcom/sdm845/cdsp.mdt failed with error -2
[ 3.773173] bluetooth hci0: Falling back to sysfs fallback for: qca/crbtfw21.tlv
[ 3.780653] usbcore: registered new interface driver snd-usb-audio
[ 3.782564] remoteproc remoteproc2: Falling back to sysfs fallback for: qcom/sdm845/cdsp.mdt
[ 3.782582] msm-snd-sdm845 soc@0:sound: MultiMedia1: error getting cpu dai name
[ 3.783716] NET: Registered protocol family 10
[ 3.785065] Segment Routing with IPv6
[ 3.785128] NET: Registered protocol family 17
[ 3.785700] Bluetooth: RFCOMM TTY layer initialized
[ 3.785709] Bluetooth: RFCOMM socket layer initialized
[ 3.785721] Bluetooth: RFCOMM ver 1.11
[ 3.785731] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 3.785733] Bluetooth: BNEP filters: protocol multicast
[ 3.785739] Bluetooth: BNEP socket layer initialized
[ 3.785743] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
[ 3.785747] Bluetooth: HIDP socket layer initialized
[ 3.785872] 9pnet: Installing 9P2000 support
[ 3.785921] Key type dns_resolver registered
[ 3.787190] registered taskstats version 1
[ 3.787195] Loading compiled-in X.509 certificates
[ 3.804185] CAM0_DVDD_1V2: supplied by VBAT
[ 3.804286] ldo24: supplied by bob
[ 3.804656] CAM0_AVDD_2V8: supplied by VBAT
[ 3.895583] qcom-qmp-phy 1c06000.phy: Registered Qcom-QMP phy
[ 3.901774] qcom-qmp-phy 1c0a000.phy: Registered Qcom-QMP phy
[ 3.907833] qcom-qmp-phy 1d87000.phy: Registered Qcom-QMP phy
[ 3.913949] qcom-qmp-phy 88e9000.phy: Registered Qcom-QMP phy
[ 3.920026] qcom-qmp-phy 88eb000.phy: Registered Qcom-QMP phy
[ 3.926348] qcom-pcie 1c00000.pci: Adding to iommu group 9
[ 3.932162] qcom-pcie 1c00000.pci: supply vdda not found, using dummy regulator
[ 3.939715] qcom-pcie 1c00000.pci: host bridge /soc@0/pci@1c00000 ranges:
[ 3.946577] qcom-pcie 1c00000.pci: IO 0x0060200000..0x00602fffff -> 0x0060200000
[ 3.954576] qcom-pcie 1c00000.pci: MEM 0x0060300000..0x0060ffffff -> 0x0060300000
[ 4.178938] qcom-pcie 1c00000.pci: Link up
[ 4.183172] qcom-pcie 1c00000.pci: PCI host bridge to bus 0000:00
[ 4.189339] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 4.194895] pci_bus 0000:00: root bus resource [io 0x0000-0xfffff] (bus address [0x60200000-0x602fffff])
[ 4.204552] pci_bus 0000:00: root bus resource [mem 0x60300000-0x60ffffff]
[ 4.211515] pci 0000:00:00.0: [17cb:0106] type 01 class 0x060400
[ 4.217607] pci 0000:00:00.0: reg 0x10: [mem 0x00000000-0x00000fff]
[ 4.223992] pci 0000:00:00.0: PME# supported from D0 D3hot D3cold
[ 4.233068] pci 0000:01:00.0: [1912:0014] type 00 class 0x0c0330
[ 4.239349] pci 0000:01:00.0: reg 0x10: [mem 0x00000000-0x00001fff 64bit]
[ 4.246911] pci 0000:01:00.0: PME# supported from D0 D3hot D3cold
[ 4.266401] pci 0000:00:00.0: BAR 14: assigned [mem 0x60300000-0x603fffff]
[ 4.273352] pci 0000:00:00.0: BAR 0: assigned [mem 0x60400000-0x60400fff]
[ 4.280220] pci 0000:01:00.0: BAR 0: assigned [mem 0x60300000-0x60301fff 64bit]
[ 4.287671] pci 0000:00:00.0: PCI bridge to [bus 01-ff]
[ 4.292954] pci 0000:00:00.0: bridge window [mem 0x60300000-0x603fffff]
[ 4.299903] pcieport 0000:00:00.0: Adding to iommu group 9
[ 4.306124] pcieport 0000:00:00.0: PME: Signaling with IRQ 173
[ 4.313228] pcieport 0000:00:00.0: AER: enabled with IRQ 173
[ 4.319096] pci 0000:01:00.0: enabling device (0000 -> 0002)
[ 4.324975] xhci_hcd 0000:01:00.0: Adding to iommu group 9
[ 4.330728] xhci_hcd 0000:01:00.0: xHCI Host Controller
[ 4.336031] xhci_hcd 0000:01:00.0: new USB bus registered, assigned bus number 1
[ 4.343545] xhci_hcd 0000:01:00.0: Zeroing 64bit base registers, expecting fault
[ 4.372505] xhci_hcd 0000:01:00.0: hcc params 0x014051cf hci version 0x100 quirks 0x0000000100000410
[ 4.383004] hub 1-0:1.0: USB hub found
[ 4.386822] hub 1-0:1.0: 4 ports detected
[ 4.391114] xhci_hcd 0000:01:00.0: xHCI Host Controller
[ 4.396402] xhci_hcd 0000:01:00.0: new USB bus registered, assigned bus number 2
[ 4.403871] xhci_hcd 0000:01:00.0: Host supports USB 3.0 SuperSpeed
[ 4.410261] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
[ 4.419081] hub 2-0:1.0: USB hub found
[ 4.422892] hub 2-0:1.0: 4 ports detected
[ 4.427729] qcom-pcie 1c08000.pci: Adding to iommu group 10
[ 4.433635] qcom-pcie 1c08000.pci: supply vdda not found, using dummy regulator
[ 4.441042] qcom-pcie 1c08000.pci: supply vddpe-3v3 not found, using dummy regulator
[ 4.448915] qcom-pcie 1c08000.pci: host bridge /soc@0/pci@1c08000 ranges:
[ 4.455782] qcom-pcie 1c08000.pci: IO 0x0040200000..0x00402fffff -> 0x0040200000
[ 4.463783] qcom-pcie 1c08000.pci: MEM 0x0040300000..0x005fffffff -> 0x0040300000
[ 4.761635] usb 2-3: new SuperSpeed Gen 1 USB device number 2 using xhci_hcd
[ 5.176879] ax88179_178a 2-3:1.0 eth0: register 'ax88179_178a' at usb-0000:01:00.0-3, ASIX AX88179 USB 3.0 Gigabit Ethernet, 00:0e:c6:81:79:01
[ 5.597976] qcom-pcie 1c08000.pci: Phy link never came up
[ 5.605114] qcom-pcie 1c08000.pci: cannot initialize host
[ 5.610808] qcom-pcie: probe of 1c08000.pci failed with error -110
[ 5.618441] bam-dma-engine 17184000.dma: Adding to iommu group 3
[ 5.630258] msm ae00000.mdss: bound ae01000.mdp (ops dpu_ops)
[ 5.636172] msm_dsi ae94000.dsi: supply gdsc not found, using dummy regulator
[ 5.643830] msm ae00000.mdss: bound ae94000.dsi (ops dsi_ops)
[ 5.650118] adreno 5000000.gpu: supply vdd not found, using dummy regulator
[ 5.657221] adreno 5000000.gpu: supply vddcx not found, using dummy regulator
[ 5.664553] msm ae00000.mdss: [drm:msm_gpu_init] A630: using IOMMU
[ 5.672099] platform 506a000.gmu: Adding to iommu group 11
[ 5.678075] msm ae00000.mdss: bound 5000000.gpu (ops a3xx_ops)
[ 5.684058] msm_dpu ae01000.mdp: [drm:msm_ioremap] *ERROR* failed to get memory resource: vbif_nrt
[ 5.693101] msm_dpu ae01000.mdp: [drm:msm_ioremap] *ERROR* failed to get memory resource: regdma
[ 5.701999] [drm:dpu_kms_hw_init:886] dpu hardware revision:0x40000000
[ 5.709923] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 5.718558] [drm] Initialized msm 1.5.0 20130625 for ae00000.mdss on minor 1
[ 5.725766] msm ae00000.mdss: Direct firmware load for qcom/a630_sqe.fw failed with error -2
[ 5.734300] msm ae00000.mdss: Falling back to sysfs fallback for: qcom/a630_sqe.fw
[ 5.741989] Bluetooth: hci0: command 0xfc00 tx timeout
[ 6.460435] lt9611_irq_thread_handler() irq_flag0: 0x0 irq_flag3: 0x80
[ 6.467063] lt9611 10-003b: hdmi cable disconnected
[ 6.548505] lt9611_irq_thread_handler() irq_flag0: 0x0 irq_flag3: 0x40
[ 6.555113] lt9611 10-003b: hdmi cable connected
[ 64.484868] remoteproc remoteproc2: powering up remoteproc-cdsp
[ 64.490884] remoteproc remoteproc2: Direct firmware load for qcom/sdm845/cdsp.mdt failed with error -2
[ 64.490904] Bluetooth: hci0: QCA Failed to request file: qca/crbtfw21.tlv (-11)
[ 64.500286] remoteproc remoteproc2: Falling back to sysfs fallback for: qcom/sdm845/cdsp.mdt
[ 64.507666] Bluetooth: hci0: QCA Failed to download patch (-11)
[ 64.522188] remoteproc remoteproc1: powering up remoteproc-adsp
[ 64.528198] remoteproc remoteproc1: Direct firmware load for qcom/sdm845/adsp.mdt failed with error -2
[ 64.537590] remoteproc remoteproc1: Falling back to sysfs fallback for: qcom/sdm845/adsp.mdt
[ 66.532550] msm ae00000.mdss: [drm:adreno_request_fw] *ERROR* failed to load a630_sqe.fw
[ 66.598140] Bluetooth: hci0: QCA preshutdown_cmd failed (-56)
[ 66.677417] random: crng init done
[ 69.506548] lt9611 10-003b: video check: h_act_a=0, h_act_b=0, v_act=0, v_total=0, h_total_sysclk=0
[ 69.539693] Console: switching to colour frame buffer device 240x67
[ 69.605276] msm ae00000.mdss: fb0: msmdrmfb frame buffer device
[ 69.616030] ufshcd-qcom 1d84000.ufshc: ufshcd_populate_vreg: Unable to find vdd-hba-supply regulator, assuming enabled
[ 69.626855] ufshcd-qcom 1d84000.ufshc: ufshcd_populate_vreg: Unable to find vccq-supply regulator, assuming enabled
[ 69.637431] ufshcd-qcom 1d84000.ufshc: ufshcd_populate_vreg: Unable to find vccq2-supply regulator, assuming enabled
[ 69.651166] scsi host0: ufshcd
[ 69.665033] duplicated lane 1 in clock-lanes, using defaults
[ 69.670801] link-frequencies 0 value 360000000
[ 69.675328] link-frequencies 1 value 180000000
[ 69.683082] ufshcd-qcom 1d84000.ufshc: ufshcd_print_pwr_info:[RX, TX]: gear=[1, 1], lane[1, 1], pwr[SLOWAUTO_MODE, SLOWAUTO_MODE], rate = 0
[ 69.685487] ov8856 16-0010: failed to find sensor: -5
[ 69.701559] ov8856: probe of 16-0010 failed with error -5
[ 69.710384] msm-snd-sdm845 soc@0:sound: MultiMedia1: error getting cpu dai name
[ 69.719351] msm-snd-sdm845 soc@0:sound: MultiMedia1: error getting cpu dai name
[ 69.729313] input: gpio_keys as /devices/platform/gpio_keys/input/input2
[ 69.737295] msm-snd-sdm845 soc@0:sound: MultiMedia1: error getting cpu dai name
[ 69.740291] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[ 69.744957] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[ 69.745618] ALSA device list:
[ 69.745622] No soundcards found.
[ 69.745692] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2
[ 69.745694] platform regulatory.0: Falling back to sysfs fallback for: regulatory.db
[ 69.810150] ufshcd-qcom 1d84000.ufshc: ufshcd_print_pwr_info:[RX, TX]: gear=[3, 3], lane[2, 2], pwr[FAST MODE, FAST MODE], rate = 2
[ 69.823206] ufshcd-qcom 1d84000.ufshc: ufshcd_find_max_sup_active_icc_level: Regulator capability was not set, actvIccLevel=0
[ 69.836390] scsi 0:0:0:49488: Well-known LUN SKhynix H28S7Q302BMR A002 PQ: 0 ANSI: 6
[ 69.849738] scsi 0:0:0:49476: Well-known LUN SKhynix H28S7Q302BMR A002 PQ: 0 ANSI: 6
[ 69.862380] scsi 0:0:0:49456: Well-known LUN SKhynix H28S7Q302BMR A002 PQ: 0 ANSI: 6
[ 69.874953] scsi 0:0:0:0: Direct-Access SKhynix H28S7Q302BMR A002 PQ: 0 ANSI: 6
[ 69.886713] scsi 0:0:0:1: Direct-Access SKhynix H28S7Q302BMR A002 PQ: 0 ANSI: 6
[ 69.896900] sd 0:0:0:0: [sda] 14145536 4096-byte logical blocks: (57.9 GB/54.0 GiB)
[ 69.905202] sd 0:0:0:0: [sda] Write Protect is off
[ 69.906250] scsi 0:0:0:2: Direct-Access SKhynix H28S7Q302BMR A002 PQ: 0 ANSI: 6
[ 69.908824] scsi 0:0:0:3: Direct-Access SKhynix H28S7Q302BMR A002 PQ: 0 ANSI: 6
[ 69.911128] sd 0:0:0:2: [sdc] 1024 4096-byte logical blocks: (4.19 MB/4.00 MiB)
[ 69.911470] sd 0:0:0:2: [sdc] Write Protect is off
[ 69.911514] sd 0:0:0:3: [sdd] 32768 4096-byte logical blocks: (134 MB/128 MiB)
[ 69.911590] sd 0:0:0:3: [sdd] Write Protect is off
[ 69.911782] scsi 0:0:0:4: Direct-Access SKhynix H28S7Q302BMR A002 PQ: 0 ANSI: 6
[ 69.911809] sd 0:0:0:3: [sdd] Write cache: enabled, read cache: enabled, supports DPO and FUA
[ 69.911917] sd 0:0:0:3: [sdd] Optimal transfer size 786432 bytes
[ 69.912214] sd 0:0:0:2: [sdc] Write cache: enabled, read cache: enabled, supports DPO and FUA
[ 69.912561] sd 0:0:0:2: [sdc] Optimal transfer size 786432 bytes
[ 69.914718] scsi 0:0:0:5: Direct-Access SKhynix H28S7Q302BMR A002 PQ: 0 ANSI: 6
[ 69.915903] sd 0:0:0:4: [sde] 1048576 4096-byte logical blocks: (4.29 GB/4.00 GiB)
[ 69.915969] sd 0:0:0:4: [sde] Write Protect is off
[ 69.916100] sd 0:0:0:4: [sde] Write cache: enabled, read cache: enabled, supports DPO and FUA
[ 69.916177] sd 0:0:0:4: [sde] Optimal transfer size 786432 bytes
[ 69.918392] sd 0:0:0:5: [sdf] 393216 4096-byte logical blocks: (1.61 GB/1.50 GiB)
[ 69.918686] sd 0:0:0:5: [sdf] Write Protect is off
[ 69.920739] sd 0:0:0:1: [sdb] 1024 4096-byte logical blocks: (4.19 MB/4.00 MiB)
[ 69.921066] sd 0:0:0:1: [sdb] Write Protect is off
[ 69.921502] sd 0:0:0:1: [sdb] Write cache: enabled, read cache: enabled, supports DPO and FUA
[ 69.921720] sd 0:0:0:1: [sdb] Optimal transfer size 786432 bytes
[ 69.927282] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, supports DPO and FUA
[ 69.927500] sd 0:0:0:0: [sda] Optimal transfer size 786432 bytes
[ 69.935087] sd 0:0:0:5: [sdf] Write cache: enabled, read cache: enabled, supports DPO and FUA
[ 69.945860] Alternate GPT is invalid, using primary GPT.
[ 69.945871] sdb: sdb1 sdb2
[ 69.946075] sdc: sdc1 sdc2
[ 69.946431] sd 0:0:0:5: [sdf] Optimal transfer size 786432 bytes
[ 69.946544] Alternate GPT is invalid, using primary GPT.
[ 69.946607] sde: sde1 sde2 sde3 sde4 sde5 sde6 sde7 sde8 sde9 sde10 sde11 sde12 sde13 sde14 sde15 sde16 sde17 sde18 sde19 sde20 sde21 sde22 sde23 sde24 sde25 sde26 sde27 sde28 sde29 sde30 sde31 sde32 sde33 sde34 sde35 sde36 sde37 sde38 sde39 sde40 sde41 sde42 sde43 sde44 sde45 sde46 sde47 sde48
[ 69.947910] sd 0:0:0:2: [sdc] Attached SCSI disk
[ 69.948164] sd 0:0:0:1: [sdb] Attached SCSI disk
[ 69.949834] msm-snd-sdm845 soc@0:sound: MultiMedia1: error getting cpu dai name
[ 69.954494] Alternate GPT is invalid, using primary GPT.
[ 69.954510] sda: sda1 sda2 sda3 sda4 sda5 sda6 sda7 sda8
[ 69.957648] sd 0:0:0:0: [sda] Attached SCSI disk
[ 69.959440] msm-snd-sdm845 soc@0:sound: MultiMedia1: error getting cpu dai name
[ 69.959542] sd 0:0:0:4: [sde] Attached SCSI disk
[ 70.303127] sdf: sdf1 sdf2 sdf3 sdf4 sdf5 sdf6 sdf7 sdf8 sdf9
[ 70.312422] sdd: sdd1 sdd2 sdd3
[ 70.312468] msm-snd-sdm845 soc@0:sound: MultiMedia1: error getting cpu dai name
[ 70.331246] sd 0:0:0:5: [sdf] Attached SCSI disk
[ 70.341287] sd 0:0:0:3: [sdd] Attached SCSI disk
[ 70.354132] msm-snd-sdm845 soc@0:sound: MultiMedia1: error getting cpu dai name
[ 70.355992] Freeing unused kernel memory: 6656K
[ 70.375203] msm-snd-sdm845 soc@0:sound: MultiMedia1: error getting cpu dai name
[ 70.400670] Run /init as init process
[ 70.409487] init: mount("selinuxfs", "/sys/fs/selinux", "selinuxfs", 0, NULL) failed Invalid argument
[ 70.420707] init: Init encountered errors starting first stage, aborting
[ 70.429049] init: InitFatalReboot: signal 6
[ 70.442552] init: #00 pc 0000000000314990 /init (UnwindStackCurrent::UnwindFromContext(unsigned long, void*)+96)
[ 70.454084] init: #01 pc 000000000027d1e0 /init (android::init::InitFatalReboot(int)+208)
[ 70.463440] init: #02 pc 000000000027d5c8 /init (android::init::InstallRebootSignalHandlers()::$_22::__invoke(int)+32)
[ 70.475296] init: #03 pc 0000000000000588 [vdso:0000ffff928f8000] (__kernel_rt_sigreturn)
[ 70.484641] init: #04 pc 000000000039f3d0 /init (abort+176)
[ 70.491357] init: #05 pc 000000000028006c /init (android::init::InitAborter(char const*)+44)
[ 70.500972] init: #06 pc 00000000002d60b8 /init (android::base::SetAborter(std::__1::function<void (char const*)>&&)::$_3::__invoke(char const*)+80)
[ 70.515512] init: #07 pc 00000000002d58b0 /init (android::base::LogMessage::~LogMessage()+320)
[ 70.525314] init: #08 pc 0000000000274bc0 /init (android::init::FirstStageMain(int, char**)+5552)
[ 70.535386] init: #09 pc 000000000039e3b0 /init (__real_libc_init(void*, void (*)(), int (*)(int, char**, char**), structors_array_t const*, bionic_tcb*)+584)
[ 70.550809] init: Reboot ending, jumping to kernel
[ 70.556828] cfg80211: failed to load regulatory.db
[ 70.557077] remoteproc remoteproc2: request_firmware failed: -11
[ 70.569931] remoteproc remoteproc1: request_firmware failed: -11
[ 70.612228] sd 0:0:0:5: [sdf] Synchronizing SCSI cache
[ 70.619140] sd 0:0:0:4: [sde] Synchronizing SCSI cache
[ 70.625925] sd 0:0:0:3: [sdd] Synchronizing SCSI cache
[ 70.632664] sd 0:0:0:2: [sdc] Synchronizing SCSI cache
[ 70.639948] sd 0:0:0:1: [sdb] Synchronizing SCSI cache
[ 70.646707] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[ 70.667687] arm-smmu 15000000.iommu: removing device with active domains!
[ 70.675636] arm-smmu 5040000.iommu: removing device with active domains!
[ 70.685483] reboot: Restarting system with command 'bootloader'
�
Format: Log Type - Time(microsec) - Message - Optional Info
Log Type: B - Since Boot(Power On Reset), D - Delta, S - Statistic
S - QC_IMAGE_VERSION_STRING=BOOT.XF.2.0-00371-SDM845LZB-1
S - IMAGE_VARIANT_STRING=SDM845LA
S - OEM_IMAGE_VERSION_STRING=TSBJ-FA-PC-02170
S - Boot Interface: UFS
S - Secure Boot: Off
S - Boot Config @ 0x00786070 = 0x000000c1
S - JTAG ID @ 0x00786130 = 0x2008e0e1
S - OEM ID @ 0x00786138 = 0x00000000
S - Serial Number @ 0x00784138 = 0x8a6e6bc2
S - OEM Config Row 0 @ 0x00784188 = 0x0000000400000000
S - OEM Config Row 1 @ 0x00784190 = 0x0000000000000000
S - Feature Config Row 0 @ 0x007841a0 = 0x0050200080000400
S - Feature Config Row 1 @ 0x007841a8 = 0xe000ffff00007fff
S - Core 0 Frequency, 1516 MHz
S - PBL Patch Ver: 1
S - PBL freq: 600 MHZ
B - 94 - PBL, Start
B - 5277 - bootable_media_detect_entry
B - 44054 - bootable_media_detect_success
B - 44430 - elf_loader_entry
B - 45039 - auth_hash_seg_entry
B - 45240 - auth_hash_seg_exit
B - 51198 - elf_segs_hash_verify_entry
B - 58741 - elf_segs_hash_verify_exit
B - 59369 - auth_xbl_sec_hash_seg_entry
B - 66743 - auth_xbl_sec_hash_seg_exit
B - 66744 - xbl_sec_segs_hash_verify_entry
B - 67502 - xbl_sec_segs_hash_verify_exit
B - 67527 - PBL, End
B - 82807 - SBL1, Start
B - 205509 - boot_flash_init, Start
D - 0 - boot_flash_init, Delta
B - 209504 - xblconfig_init, Start
D - 549 - Auth Metadata
D - 70821 - xblconfig_init, Delta
B - 285297 - sbl1_ddr_set_default_params, Start
D - 1494 - sbl1_ddr_set_default_params, Delta
B - 293288 - boot_config_data_table_init, Start
B - 297924 - CDT not programmed, using default
D - 4544 - boot_config_data_table_init, Delta - (54 Bytes)
B - 312442 - CDT Version:3,Platform ID:8,Major ID:1,Minor ID:0,Subtype:0
B - 318145 - pm_device_init, Start
B - 1397754 - PM: PON REASON: PM0=0x8000028000000021:0x0 PM1=0x8000088000000020:0x0 PM2=0x8000088000000020:0x0
B - 1457900 - PM: SET_VAL:Skip
D - 1140303 - pm_device_init, Delta
B - 1460919 - pm_driver_init, Start
D - 5307 - pm_driver_init, Delta
B - 1469764 - PM: Trigger FG IMA Reset
B - 1473302 - PM: Trigger FG IMA Reset.Completed
B - 1482513 - PM: EntryVbat: 4216; EntrySOC: -1
B - 1482544 - PM: ADSP result: 0
B - 1487119 - PM: Manually set ICL 500mA
B - 1490199 - PM: BATT TEMP: 25 DegC
B - 1494225 - vsense_init, Start
D - 0 - vsense_init, Delta
B - 1527806 - sbl1_ddr_set_params, Start
B - 1529636 - Pre_DDR_clock_init, Start
D - 91 - Pre_DDR_clock_init, Delta
D - 7686 - sbl1_ddr_set_params, Delta
B - 1539243 - sbl1_ddr_init, Start
D - 16104 - sbl1_ddr_init, Delta
B - 1559221 - DSF version = 253.10, DSF SHRM version = 173.3
B - 1562545 - Manufacturer ID = 6, Device Type = 7
B - 1568157 - Rank 0 size = 4096 MB, Rank 1 size = 0 MB
B - 1573098 - do_ddr_training, Start
B - 1579686 - Frequency = 1355 MHz
D - 3599 - do_ddr_training, Delta
B - 1588165 - pImem Init Start
D - 9729 - pImem Init End, Delta
B - 1599755 - clock_init, Start
D - 213 - clock_init, Delta
B - 1604788 - Image Load, Start
D - 2897 - APDP Image Loaded, Delta - (0 Bytes)
B - 1610888 - usb: UFS Serial - a7ff5045
B - 1615524 - usb: chgr - SDP_CHARGER
B - 1619672 - usb: qusb2_1: hstx , 0x5
B - 1623149 - usb: PLL1 locked , 0x5
B - 1627266 - PM: 0: PON=0x21:PON1:HARD_RESET: ON=0x80:PON_SEQ: POFF=0x2:PS_HOLD: OFF=0x80:POFF_SEQ
B - 1635867 - PM: 1: PON=0x20:PON1: ON=0x80:PON_SEQ: POFF=0x8:GP1: OFF=0x80:POFF_SEQ
B - 1644895 - PM: 2: PON=0x20:PON1: ON=0x80:PON_SEQ: POFF=0x8:GP1: OFF=0x80:POFF_SEQ
B - 1652551 - PM: SMEM Chgr Info Write Success
B - 1659718 - Image Load, Start
D - 397 - Auth Metadata
D - 10065 - Segments hash check
D - 19520 - AOP Image Loaded, Delta - (178808 Bytes)
B - 1682502 - Image Load, Start
D - 396 - Auth Metadata
D - 335 - Segments hash check
D - 10858 - QSEE Dev Config Image Loaded, Delta - (33720 Bytes)
B - 1702205 - Image Load, Start
D - 3843 - Auth Metadata
D - 10858 - Segments hash check
D - 34434 - QSEE Image Loaded, Delta - (2035952 Bytes)
B - 1739903 - Image Load, Start
D - 122 - SEC Image Loaded, Delta - (4096 Bytes)
B - 1748290 - Image Load, Start
D - 397 - Auth Metadata
D - 2409 - Segments hash check
D - 17538 - QHEE Image Loaded, Delta - (380480 Bytes)
B - 1769213 - Image Load, Start
D - 5002 - STI Image Loaded, Delta - (0 Bytes)
B - 1777509 - Image Load, Start
D - 366 - Auth Metadata
D - 732 - Segments hash check
D - 10218 - ABL Image Loaded, Delta - (146000 Bytes)
B - 1791082 - Image Load, Start
D - 427 - Auth Metadata
D - 9150 - Segments hash check
D - 32940 - APPSBL Image Loaded, Delta - (2097152 Bytes)
B - 1864465 - SBL1, End
D - 1781688 - SBL1, Delta
S - Flash Throughput, 122000 KB/s (4948646 Bytes, 40495 us)
S - DDR Frequency, 1353 MHz
UEFI Start [ 2209] SEC
ASLR : On
DEP : On
Timer Delta : +0 mS
RAM Entry 0 : Base 0x0000000080000000 Size 0x00000000FDFA0000
UEFI Ver : 5.0.190528.BOOT.XF.2.0-00371-SDM845LZB-1
Build Info : 64b May 28 2019 11:21:44
Boot Device : UFS
PROD Mode : TRUE
Retail : TRUE
PM0: 20, PM1: 21, PM2: 24,
MDDPlatform preferd display VerticalActive : 0x438
not panel detected, use defualt panel !
DisplayDxe: Resolution 1920x1080 (1 intf)
Render Splash [ 3229]
-----------------------------
Platform Init [ 3297] BDS
Platform : MTP
Chip Name : SDA845
Chip Ver : 2.1
Core 0 Freq: 1612 MHz
-----------------------------
UEFI Total : 1103 ms
POST Time [ 3312] OS Loader
Loader Build Info: Dec 10 2019 01:42:45
VB: RWDeviceState: Succeed using devinfo!
Press <Down> to enter fastboot, <Up> to enter recovery, or <ESC> to enter EmergencyDLOAD
KeyPress:0, BootReason:2
Fastboot=1, Recovery:0
GetVmData: making ScmCall to get HypInfo
GetVmData: No Vm data present! Status = (0x3)
VM Hyp calls not present
Launching fastboot
Fastboot Build Info: Dec 10 2019 01:42:44
qusb2_1: hstx: 5
PLL1 locked: 5
usb_lane: 1
Fastboot: Initializing...
Fastboot: Processing commands
Fastboot Action (Press <Right> to select): SAT
Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment