Instantly share code, notes, and snippets.

Embed
What would you like to do?
Ubuntu boot messages on AMD EPYC baremetal server at packet.net
Booting in blind mode
[ 0.000000] Linux version 4.15.0-20-generic (buildd@lgw01-amd64-039) (gcc version 7.3.0 (Ubuntu 7.3.0-16ubuntu3)) #21-Ubuntu SMP Tue Apr 24 06:16:15 UTC 2018 (Ubuntu 4.15.0-20.21-generic 4.15.17)
[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz root=UUID=f46ede68-dc97-4fc6-9c60-37f4387850b5 ro serial console=tty0 console=ttyS1,115200n8 biosdevname=0 net.ifnames=1
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] Centaur CentaurHauls
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
[ 0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'compacted' format.
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000008efff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000008f000-0x000000000008ffff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x0000000000090000-0x000000000009ffff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x0000000069017fff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000069018000-0x0000000069117fff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000069118000-0x0000000069317fff] type 20
[ 0.000000] BIOS-e820: [mem 0x0000000069318000-0x000000006b517fff] reserved
[ 0.000000] BIOS-e820: [mem 0x000000006b518000-0x000000006c347fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x000000006c348000-0x000000006c547fff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x000000006c548000-0x000000006fffffff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000070000000-0x000000008fffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec10000-0x00000000fec10fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed80000-0x00000000fed80fff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000047f37ffff] usable
[ 0.000000] BIOS-e820: [mem 0x000000047f380000-0x000000047fffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000480000000-0x000000087ff7ffff] usable
[ 0.000000] BIOS-e820: [mem 0x000000087ff80000-0x000000087fffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000880000000-0x0000000c7ff7ffff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000c7ff80000-0x0000000c7fffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000c80000000-0x000000107ff7ffff] usable
[ 0.000000] BIOS-e820: [mem 0x000000107ff80000-0x000000107fffffff] reserved
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] efi: EFI v2.50 by Dell Inc.
[ 0.000000] efi: ACPI=0x6c547000 ACPI 2.0=0x6c547014 SMBIOS=0x6affe000 SMBIOS 3.0=0x6affc000
[ 0.000000] secureboot: Secure boot could not be determined (mode 0)
[ 0.000000] random: fast init done
[ 0.000000] SMBIOS 3.0.0 present.
[ 0.000000] DMI: Dell Inc. PowerEdge R6415/065PKD, BIOS 1.4.3 06/29/2018
[ 0.000000] e820: last_pfn = 0x107ff80 max_arch_pfn = 0x400000000
[ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT
[ 0.000000] e820: last_pfn = 0x70000 max_arch_pfn = 0x400000000
[ 0.000000] Scanning 1 areas for low memory corruption
[ 0.000000] Using GB pages for direct mapping
[ 0.000000] RAMDISK: [mem 0x346fa000-0x36374fff]
[ 0.000000] ACPI: Early table checksum verification disabled
[ 0.000000] ACPI: RSDP 0x000000006C547014 000024 (v02 DELL )
[ 0.000000] ACPI: XSDT 0x000000006C5460E8 0000C4 (v01 DELL PE_SC3 00000002 DELL 00000001)
[ 0.000000] ACPI: FACP 0x000000006C536000 000114 (v06 DELL PE_SC3 00000002 DELL 00000001)
[ 0.000000] ACPI: DSDT 0x000000006C529000 00950B (v02 DELL PE_SC3 00000002 DELL 00000001)
[ 0.000000] ACPI: FACS 0x000000006C31C000 000040
[ 0.000000] ACPI: SSDT 0x000000006C545000 0000D2 (v02 DELL PE_SC3 00000002 MSFT 04000000)
[ 0.000000] ACPI: BERT 0x000000006C544000 000030 (v01 DELL BERT 00000001 DELL 00000001)
[ 0.000000] ACPI: HEST 0x000000006C543000 0006DC (v01 DELL HEST 00000001 DELL 00000001)
[ 0.000000] ACPI: SSDT 0x000000006C542000 000294 (v01 DELL PE_SC3 00000001 AMD 00000001)
[ 0.000000] ACPI: SRAT 0x000000006C541000 000420 (v03 DELL PE_SC3 00000001 AMD 00000001)
[ 0.000000] ACPI: MSCT 0x000000006C540000 00004E (v01 DELL PE_SC3 00000000 AMD 00000001)
[ 0.000000] ACPI: SLIT 0x000000006C53F000 00003C (v01 DELL PE_SC3 00000001 AMD 00000001)
[ 0.000000] ACPI: CRAT 0x000000006C53C000 002DC0 (v01 DELL PE_SC3 00000001 AMD 00000001)
[ 0.000000] ACPI: CDIT 0x000000006C53B000 000038 (v01 DELL PE_SC3 00000001 AMD 00000001)
[ 0.000000] ACPI: SSDT 0x000000006C53A000 0003C6 (v02 DELL Tpm2Tabl 00001000 INTL 20170119)
[ 0.000000] ACPI: TPM2 0x000000006C539000 000038 (v04 DELL PE_SC3 00000002 DELL 00000001)
[ 0.000000] ACPI: EINJ 0x000000006C538000 000150 (v01 DELL PE_SC3 00000001 AMD 00000001)
[ 0.000000] ACPI: SLIC 0x000000006C537000 000024 (v01 DELL PE_SC3 00000002 DELL 00000001)
[ 0.000000] ACPI: HPET 0x000000006C535000 000038 (v01 DELL PE_SC3 00000002 DELL 00000001)
[ 0.000000] ACPI: APIC 0x000000006C534000 0004B2 (v03 DELL PE_SC3 00000002 DELL 00000001)
[ 0.000000] ACPI: MCFG 0x000000006C533000 00003C (v01 DELL PE_SC3 00000002 DELL 00000001)
[ 0.000000] ACPI: SSDT 0x000000006C528000 000629 (v02 DELL xhc_port 00000001 INTL 20170119)
[ 0.000000] ACPI: IVRS 0x000000006C527000 0001F0 (v02 DELL PE_SC3 00000001 AMD 00000000)
[ 0.000000] ACPI: SSDT 0x000000006C525000 001658 (v01 AMD CPMCMN 00000001 INTL 20170119)
[ 0.000000] SRAT: PXM 0 -> APIC 0x00 -> Node 0
[ 0.000000] SRAT: PXM 0 -> APIC 0x01 -> Node 0
[ 0.000000] SRAT: PXM 0 -> APIC 0x02 -> Node 0
[ 0.000000] SRAT: PXM 0 -> APIC 0x03 -> Node 0
[ 0.000000] SRAT: PXM 0 -> APIC 0x04 -> Node 0
[ 0.000000] SRAT: PXM 0 -> APIC 0x05 -> Node 0
[ 0.000000] SRAT: PXM 0 -> APIC 0x08 -> Node 0
[ 0.000000] SRAT: PXM 0 -> APIC 0x09 -> Node 0
[ 0.000000] SRAT: PXM 0 -> APIC 0x0a -> Node 0
[ 0.000000] SRAT: PXM 0 -> APIC 0x0b -> Node 0
[ 0.000000] SRAT: PXM 0 -> APIC 0x0c -> Node 0
[ 0.000000] SRAT: PXM 0 -> APIC 0x0d -> Node 0
[ 0.000000] SRAT: PXM 1 -> APIC 0x10 -> Node 1
[ 0.000000] SRAT: PXM 1 -> APIC 0x11 -> Node 1
[ 0.000000] SRAT: PXM 1 -> APIC 0x12 -> Node 1
[ 0.000000] SRAT: PXM 1 -> APIC 0x13 -> Node 1
[ 0.000000] SRAT: PXM 1 -> APIC 0x14 -> Node 1
[ 0.000000] SRAT: PXM 1 -> APIC 0x15 -> Node 1
[ 0.000000] SRAT: PXM 1 -> APIC 0x18 -> Node 1
[ 0.000000] SRAT: PXM 1 -> APIC 0x19 -> Node 1
[ 0.000000] SRAT: PXM 1 -> APIC 0x1a -> Node 1
[ 0.000000] SRAT: PXM 1 -> APIC 0x1b -> Node 1
[ 0.000000] SRAT: PXM 1 -> APIC 0x1c -> Node 1
[ 0.000000] SRAT: PXM 1 -> APIC 0x1d -> Node 1
[ 0.000000] SRAT: PXM 2 -> APIC 0x20 -> Node 2
[ 0.000000] SRAT: PXM 2 -> APIC 0x21 -> Node 2
[ 0.000000] SRAT: PXM 2 -> APIC 0x22 -> Node 2
[ 0.000000] SRAT: PXM 2 -> APIC 0x23 -> Node 2
[ 0.000000] SRAT: PXM 2 -> APIC 0x24 -> Node 2
[ 0.000000] SRAT: PXM 2 -> APIC 0x25 -> Node 2
[ 0.000000] SRAT: PXM 2 -> APIC 0x28 -> Node 2
[ 0.000000] SRAT: PXM 2 -> APIC 0x29 -> Node 2
[ 0.000000] SRAT: PXM 2 -> APIC 0x2a -> Node 2
[ 0.000000] SRAT: PXM 2 -> APIC 0x2b -> Node 2
[ 0.000000] SRAT: PXM 2 -> APIC 0x2c -> Node 2
[ 0.000000] SRAT: PXM 2 -> APIC 0x2d -> Node 2
[ 0.000000] SRAT: PXM 3 -> APIC 0x30 -> Node 3
[ 0.000000] SRAT: PXM 3 -> APIC 0x31 -> Node 3
[ 0.000000] SRAT: PXM 3 -> APIC 0x32 -> Node 3
[ 0.000000] SRAT: PXM 3 -> APIC 0x33 -> Node 3
[ 0.000000] SRAT: PXM 3 -> APIC 0x34 -> Node 3
[ 0.000000] SRAT: PXM 3 -> APIC 0x35 -> Node 3
[ 0.000000] SRAT: PXM 3 -> APIC 0x38 -> Node 3
[ 0.000000] SRAT: PXM 3 -> APIC 0x39 -> Node 3
[ 0.000000] SRAT: PXM 3 -> APIC 0x3a -> Node 3
[ 0.000000] SRAT: PXM 3 -> APIC 0x3b -> Node 3
[ 0.000000] SRAT: PXM 3 -> APIC 0x3c -> Node 3
[ 0.000000] SRAT: PXM 3 -> APIC 0x3d -> Node 3
[ 0.000000] ACPI: SRAT: Node 0 PXM 0 [mem 0x00000000-0x0009ffff]
[ 0.000000] ACPI: SRAT: Node 0 PXM 0 [mem 0x00100000-0x7fffffff]
[ 0.000000] ACPI: SRAT: Node 0 PXM 0 [mem 0x100000000-0x47fffffff]
[ 0.000000] ACPI: SRAT: Node 1 PXM 1 [mem 0x480000000-0x87fffffff]
[ 0.000000] ACPI: SRAT: Node 2 PXM 2 [mem 0x880000000-0xc7fffffff]
[ 0.000000] ACPI: SRAT: Node 3 PXM 3 [mem 0xc80000000-0x107fffffff]
[ 0.000000] NUMA: Node 0 [mem 0x00000000-0x0009ffff] + [mem 0x00100000-0x7fffffff] -> [mem 0x00000000-0x7fffffff]
[ 0.000000] NUMA: Node 0 [mem 0x00000000-0x7fffffff] + [mem 0x100000000-0x47fffffff] -> [mem 0x00000000-0x47fffffff]
[ 0.000000] NODE_DATA(0) allocated [mem 0x47f355000-0x47f37ffff]
[ 0.000000] NODE_DATA(1) allocated [mem 0x87ff55000-0x87ff7ffff]
[ 0.000000] NODE_DATA(2) allocated [mem 0xc7ff55000-0xc7ff7ffff]
[ 0.000000] NODE_DATA(3) allocated [mem 0x107ff54000-0x107ff7efff]
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.000000] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
[ 0.000000] Normal [mem 0x0000000100000000-0x000000107ff7ffff]
[ 0.000000] Device empty
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000001000-0x000000000008efff]
[ 0.000000] node 0: [mem 0x0000000000090000-0x000000000009ffff]
[ 0.000000] node 0: [mem 0x0000000000100000-0x0000000069017fff]
[ 0.000000] node 0: [mem 0x000000006c548000-0x000000006fffffff]
[ 0.000000] node 0: [mem 0x0000000100000000-0x000000047f37ffff]
[ 0.000000] node 1: [mem 0x0000000480000000-0x000000087ff7ffff]
[ 0.000000] node 2: [mem 0x0000000880000000-0x0000000c7ff7ffff]
[ 0.000000] node 3: [mem 0x0000000c80000000-0x000000107ff7ffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000047f37ffff]
[ 0.000000] Initmem setup node 1 [mem 0x0000000480000000-0x000000087ff7ffff]
[ 0.000000] Initmem setup node 2 [mem 0x0000000880000000-0x0000000c7ff7ffff]
[ 0.000000] Initmem setup node 3 [mem 0x0000000c80000000-0x000000107ff7ffff]
[ 0.000000] Reserved but unavailable: 97 pages
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
[ 0.000000] IOAPIC[0]: apic_id 128, version 33, address 0xfec00000, GSI 0-23
[ 0.000000] IOAPIC[1]: apic_id 129, version 33, address 0xfd880000, GSI 24-55
[ 0.000000] IOAPIC[2]: apic_id 130, version 33, address 0xe0900000, GSI 56-87
[ 0.000000] IOAPIC[3]: apic_id 131, version 33, address 0xc5900000, GSI 88-119
[ 0.000000] IOAPIC[4]: apic_id 132, version 33, address 0xaa900000, GSI 120-151
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x10228201 base: 0xfed00000
[ 0.000000] smpboot: Allowing 128 CPUs, 80 hotplug CPUs
[ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0008f000-0x0008ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x69018000-0x69117fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x69118000-0x69317fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x69318000-0x6b517fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x6b518000-0x6c347fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x6c348000-0x6c547fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x70000000-0x8fffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x90000000-0xfec0ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec10000-0xfec10fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec11000-0xfed7ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed80000-0xfed80fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed81000-0xffffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x47f380000-0x47fffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x87ff80000-0x87fffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xc7ff80000-0xc7fffffff]
[ 0.000000] e820: [mem 0x90000000-0xfec0ffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[ 0.000000] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:128 nr_cpu_ids:128 nr_node_ids:4
[ 0.000000] percpu: Embedded 46 pages/cpu @ (ptrval) s151552 r8192 d28672 u262144
[ 0.000000] Built 4 zonelists, mobility grouping on. Total pages: 16432403
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz root=UUID=f46ede68-dc97-4fc6-9c60-37f4387850b5 ro serial console=tty0 console=ttyS1,115200n8 biosdevname=0 net.ifnames=1
[ 0.000000] log_buf_len individual max cpu contribution: 4096 bytes
[ 0.000000] log_buf_len total cpu_extra contributions: 520192 bytes
[ 0.000000] log_buf_len min size: 262144 bytes
[ 0.000000] log_buf_len: 1048576 bytes
[ 0.000000] early log buf free: 244572(93%)
[ 0.000000] Memory: 65431352K/66777528K available (12300K kernel code, 2470K rwdata, 4240K rodata, 2404K init, 2416K bss, 1346176K reserved, 0K cma-reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=128, Nodes=4
[ 0.000000] ftrace: allocating 39065 entries in 153 pages
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=128.
[ 0.000000] Tasks RCU enabled.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=128
[ 0.000000] NR_IRQS: 524544, nr_irqs: 3624, preallocated irqs: 16
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] console [ttyS1] enabled
[ 0.000000] mempolicy: Enabling automatic NUMA balancing. Configure with numa_balancing= or the kernel.numa_balancing sysctl
[ 0.000000] ACPI: Core revision 20170831
[ 0.000000] ACPI: 6 ACPI AML tables successfully acquired and loaded
[ 0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484873504 ns
[ 0.000000] APIC: Switch to symmetric I/O mode setup
[ 0.008000] Switched APIC routing to physical flat.
[ 0.016000] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.036000] tsc: Fast TSC calibration using PIT
[ 0.040000] tsc: Detected 1996.234 MHz processor
[ 0.044000] Calibrating delay loop (skipped), value calculated using timer frequency.. 3992.46 BogoMIPS (lpj=7984936)
[ 0.048001] pid_max: default: 131072 minimum: 1024
[ 0.052793] Security Framework initialized
[ 0.056002] Yama: becoming mindful.
[ 0.060195] AppArmor: AppArmor initialized
[ 0.074570] Dentry cache hash table entries: 8388608 (order: 14, 67108864 bytes)
[ 0.082129] Inode-cache hash table entries: 4194304 (order: 13, 33554432 bytes)
[ 0.084214] Mount-cache hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.088133] Mountpoint-cache hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.092690] CPU: Physical Processor ID: 0
[ 0.096001] CPU: Processor Core ID: 0
[ 0.100008] mce: CPU supports 23 MCE banks
[ 0.104045] LVT offset 2 assigned for vector 0xf4
[ 0.108011] Last level iTLB entries: 4KB 1024, 2MB 1024, 4MB 512
[ 0.112001] Last level dTLB entries: 4KB 1536, 2MB 1536, 4MB 768, 1GB 0
[ 0.116002] Spectre V2 : Mitigation: Full AMD retpoline
[ 0.120001] Spectre V2 : Spectre v2 mitigation: Enabling Indirect Branch Prediction Barrier
[ 0.128573] Freeing SMP alternatives memory: 36K
[ 0.140000] smpboot: CPU0: AMD EPYC 7401P 24-Core Processor (family: 0x17, model: 0x1, stepping: 0x2)
[ 0.140222] Performance Events: Fam17h core perfctr, AMD PMU driver.
[ 0.144003] ... version: 0
[ 0.148001] ... bit width: 48
[ 0.152001] ... generic registers: 6
[ 0.156001] ... value mask: 0000ffffffffffff
[ 0.160001] ... max period: 00007fffffffffff
[ 0.164001] ... fixed-purpose events: 0
[ 0.168001] ... event mask: 000000000000003f
[ 0.176063] Hierarchical SRCU implementation.
[ 0.182019] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
[ 0.184010] smp: Bringing up secondary CPUs ...
[ 0.188134] x86: Booting SMP configuration:
[ 0.192003] .... node #1, CPUs: #1
[ 0.200003] .... node #2, CPUs: #2
[ 0.204002] .... node #3, CPUs: #3
[ 0.212002] .... node #0, CPUs: #4
[ 0.219961] .... node #1, CPUs: #5
[ 0.224002] .... node #2, CPUs: #6
[ 0.232002] .... node #3, CPUs: #7
[ 0.236003] .... node #0, CPUs: #8
[ 0.244002] .... node #1, CPUs: #9
[ 0.248002] .... node #2, CPUs: #10
[ 0.256003] .... node #3, CPUs: #11
[ 0.260002] .... node #0, CPUs: #12
[ 0.268002] .... node #1, CPUs: #13
[ 0.276003] .... node #2, CPUs: #14
[ 0.280002] .... node #3, CPUs: #15
[ 0.288002] .... node #0, CPUs: #16
[ 0.292004] .... node #1, CPUs: #17
[ 0.300002] .... node #2, CPUs: #18
[ 0.304002] .... node #3, CPUs: #19
[ 0.312003] .... node #0, CPUs: #20
[ 0.316002] .... node #1, CPUs: #21
[ 0.324002] .... node #2, CPUs: #22
[ 0.332003] .... node #3, CPUs: #23
[ 0.336002] .... node #0, CPUs: #24
[ 0.344002] .... node #1, CPUs: #25
[ 0.348003] .... node #2, CPUs: #26
[ 0.356002] .... node #3, CPUs: #27
[ 0.360002] .... node #0, CPUs: #28
[ 0.368003] .... node #1, CPUs: #29
[ 0.372002] .... node #2, CPUs: #30
[ 0.380002] .... node #3, CPUs: #31
[ 0.388002] .... node #0, CPUs: #32
[ 0.392001] .... node #1, CPUs: #33
[ 0.400002] .... node #2, CPUs: #34
[ 0.404002] .... node #3, CPUs: #35
[ 0.412002] .... node #0, CPUs: #36
[ 0.416002] .... node #1, CPUs: #37
[ 0.424002] .... node #2, CPUs: #38
[ 0.428001] .... node #3, CPUs: #39
[ 0.436002] .... node #0, CPUs: #40
[ 0.440002] .... node #1, CPUs: #41
[ 0.448002] .... node #2, CPUs: #42
[ 0.456002] .... node #3, CPUs: #43
[ 0.460002] .... node #0, CPUs: #44
[ 0.468001] .... node #1, CPUs: #45
[ 0.472002] .... node #2, CPUs: #46
[ 0.480002] .... node #3, CPUs: #47
[ 0.482124] smp: Brought up 4 nodes, 48 CPUs
[ 0.488004] smpboot: Max logical packages: 3
[ 0.492006] smpboot: Total of 48 processors activated (191638.46 BogoMIPS)
[ 0.508313] devtmpfs: initialized
[ 0.508313] x86/mm: Memory block size: 2048MB
[ 0.516365] evm: security.selinux
[ 0.516365] evm: security.SMACK64
[ 0.520000] evm: security.SMACK64EXEC
[ 0.524001] evm: security.SMACK64TRANSMUTE
[ 0.528000] evm: security.SMACK64MMAP
[ 0.532001] evm: security.apparmor
[ 0.536000] evm: security.ima
[ 0.540000] evm: security.capability
[ 0.544035] PM: Registering ACPI NVS region [mem 0x0008f000-0x0008ffff] (4096 bytes)
[ 0.552003] PM: Registering ACPI NVS region [mem 0x6b518000-0x6c347fff] (14876672 bytes)
[ 0.560364] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[ 0.568087] futex hash table entries: 32768 (order: 9, 2097152 bytes)
[ 0.576782] pinctrl core: initialized pinctrl subsystem
[ 0.580152] RTC time: 21:20:30, date: 10/01/18
[ 0.584319] NET: Registered protocol family 16
[ 0.592095] audit: initializing netlink subsys (disabled)
[ 0.596019] audit: type=2000 audit(1538428827.596:1): state=initialized audit_enabled=0 res=1
[ 0.604007] cpuidle: using governor ladder
[ 0.608029] cpuidle: using governor menu
[ 0.612101] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[ 0.620003] ACPI: bus type PCI registered
[ 0.624002] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.632172] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0x80000000-0x8fffffff] (base 0x80000000)
[ 0.640033] PCI: MMCONFIG at [mem 0x80000000-0x8fffffff] reserved in E820
[ 0.648018] PCI: Using configuration type 1 for base access
[ 0.652012] PCI: Dell System detected, enabling pci=bfsort.
[ 0.664064] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
[ 0.668004] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[ 0.672372] ACPI: Added _OSI(Module Device)
[ 0.676004] ACPI: Added _OSI(Processor Device)
[ 0.680001] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.684001] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.688152] ACPI: Executed 2 blocks of module-level executable AML code
[ 0.703404] ACPI: Interpreter enabled
[ 0.704012] ACPI: (supports S0 S5)
[ 0.708001] ACPI: Using IOAPIC for interrupt routing
[ 0.712285] HEST: Table parsing has been initialized.
[ 0.716004] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.720226] ACPI: Enabled 1 GPEs in block 00 to 1F
[ 0.738288] ACPI: PCI Interrupt Link [LNKA] (IRQs 4 5 7 10 11 14 15) *0
[ 0.740057] ACPI: PCI Interrupt Link [LNKB] (IRQs 4 5 7 10 11 14 15) *0
[ 0.744056] ACPI: PCI Interrupt Link [LNKC] (IRQs 4 5 7 10 11 14 15) *0
[ 0.748057] ACPI: PCI Interrupt Link [LNKD] (IRQs 4 5 7 10 11 14 15) *0
[ 0.752056] ACPI: PCI Interrupt Link [LNKE] (IRQs 4 5 7 10 11 14 15) *0
[ 0.756055] ACPI: PCI Interrupt Link [LNKF] (IRQs 4 5 7 10 11 14 15) *0
[ 0.760056] ACPI: PCI Interrupt Link [LNKG] (IRQs 4 5 7 10 11 14 15) *0
[ 0.764056] ACPI: PCI Interrupt Link [LNKH] (IRQs 4 5 7 10 11 14 15) *0
[ 0.768282] ACPI: PCI Root Bridge [PC00] (domain 0000 [bus 00-3f])
[ 0.772007] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[ 0.776072] acpi PNP0A08:00: PCIe AER handled by firmware
[ 0.780134] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME PCIeCapability]
[ 0.784002] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration
[ 0.792131] PCI host bridge to bus 0000:00
[ 0.796003] pci_bus 0000:00: root bus resource [io 0x0000-0x03af window]
[ 0.800002] pci_bus 0000:00: root bus resource [io 0x03e0-0x0cf7 window]
[ 0.804002] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000c3fff window]
[ 0.808001] pci_bus 0000:00: root bus resource [mem 0x000c4000-0x000c7fff window]
[ 0.812001] pci_bus 0000:00: root bus resource [mem 0x000c8000-0x000cbfff window]
[ 0.816001] pci_bus 0000:00: root bus resource [mem 0x000cc000-0x000cffff window]
[ 0.820002] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff window]
[ 0.824002] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window]
[ 0.828001] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window]
[ 0.832001] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window]
[ 0.836001] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff window]
[ 0.840001] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff window]
[ 0.844002] pci_bus 0000:00: root bus resource [mem 0x000e8000-0x000ebfff window]
[ 0.848002] pci_bus 0000:00: root bus resource [mem 0x000ec000-0x000effff window]
[ 0.852001] pci_bus 0000:00: root bus resource [mem 0x000f0000-0x000fffff window]
[ 0.856002] pci_bus 0000:00: root bus resource [io 0x0d00-0x3fff window]
[ 0.860001] pci_bus 0000:00: root bus resource [mem 0xe1000000-0xfebfffff window]
[ 0.864002] pci_bus 0000:00: root bus resource [mem 0x10000000000-0x2bf3fffffff window]
[ 0.868002] pci_bus 0000:00: root bus resource [bus 00-3f]
[ 0.877019] pci 0000:00:07.1: enabling Extended Tags
[ 0.881038] pci 0000:00:08.1: enabling Extended Tags
[ 0.891697] pci 0000:00:03.1: PCI bridge to [bus 01]
[ 0.892756] pci 0000:02:00.0: enabling Extended Tags
[ 0.896147] pci 0000:02:00.2: enabling Extended Tags
[ 0.900151] pci 0000:02:00.3: enabling Extended Tags
[ 0.904140] pci 0000:00:07.1: PCI bridge to [bus 02]
[ 0.908765] pci 0000:03:00.0: enabling Extended Tags
[ 0.912161] pci 0000:03:00.1: enabling Extended Tags
[ 0.916140] pci 0000:00:08.1: PCI bridge to [bus 03]
[ 0.920566] ACPI: PCI Root Bridge [PC01] (domain 0000 [bus 40-7f])
[ 0.924004] acpi PNP0A08:01: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[ 0.928070] acpi PNP0A08:01: PCIe AER handled by firmware
[ 0.932134] acpi PNP0A08:01: _OSC: OS now controls [PCIeHotplug PME PCIeCapability]
[ 0.936001] acpi PNP0A08:01: FADT indicates ASPM is unsupported, using BIOS configuration
[ 0.940373] PCI host bridge to bus 0000:40
[ 0.944002] pci_bus 0000:40: root bus resource [io 0x4000-0x7fff window]
[ 0.948001] pci_bus 0000:40: root bus resource [mem 0xc6000000-0xe0ffffff window]
[ 0.952001] pci_bus 0000:40: root bus resource [mem 0x2bf40000000-0x47e7fffffff window]
[ 0.956001] pci_bus 0000:40: root bus resource [bus 40-7f]
[ 0.961138] pci 0000:40:07.1: enabling Extended Tags
[ 0.964352] pci 0000:40:08.1: enabling Extended Tags
[ 0.968837] pci 0000:41:00.0: enabling Extended Tags
[ 0.972158] pci 0000:41:00.2: enabling Extended Tags
[ 0.976158] pci 0000:41:00.3: enabling Extended Tags
[ 0.980146] pci 0000:40:07.1: PCI bridge to [bus 41]
[ 0.984157] pci 0000:42:00.0: enabling Extended Tags
[ 0.992168] pci 0000:42:00.1: enabling Extended Tags
[ 0.996147] pci 0000:40:08.1: PCI bridge to [bus 42]
[ 1.000318] ACPI: PCI Root Bridge [PC02] (domain 0000 [bus 80-bf])
[ 1.004004] acpi PNP0A08:02: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[ 1.008069] acpi PNP0A08:02: PCIe AER handled by firmware
[ 1.012133] acpi PNP0A08:02: _OSC: OS now controls [PCIeHotplug PME PCIeCapability]
[ 1.016001] acpi PNP0A08:02: FADT indicates ASPM is unsupported, using BIOS configuration
[ 1.020410] PCI host bridge to bus 0000:80
[ 1.024002] pci_bus 0000:80: root bus resource [io 0x03b0-0x03df window]
[ 1.028002] pci_bus 0000:80: root bus resource [mem 0x000a0000-0x000bffff window]
[ 1.032001] pci_bus 0000:80: root bus resource [io 0x8000-0xbfff window]
[ 1.036002] pci_bus 0000:80: root bus resource [mem 0xab000000-0xc5ffffff window]
[ 1.040001] pci_bus 0000:80: root bus resource [mem 0x47e80000000-0x63dbfffffff window]
[ 1.044002] pci_bus 0000:80: root bus resource [bus 80-bf]
[ 1.049929] pci 0000:80:07.1: enabling Extended Tags
[ 1.056229] pci 0000:80:08.1: enabling Extended Tags
[ 1.072017] pci 0000:80:01.2: PCI bridge to [bus 81-82]
[ 1.076276] pci 0000:81:00.0: PCI bridge to [bus 82]
[ 1.080222] pci 0000:83:00.0: Enabling fixed DMA alias to 00.1
[ 1.096014] pci 0000:80:03.1: PCI bridge to [bus 83]
[ 1.100602] pci 0000:84:00.0: enabling Extended Tags
[ 1.104159] pci 0000:84:00.2: enabling Extended Tags
[ 1.108133] pci 0000:80:07.1: PCI bridge to [bus 84]
[ 1.112159] pci 0000:85:00.0: enabling Extended Tags
[ 1.116169] pci 0000:85:00.1: enabling Extended Tags
[ 1.120169] pci 0000:85:00.2: enabling Extended Tags
[ 1.124151] pci 0000:80:08.1: PCI bridge to [bus 85]
[ 1.128312] ACPI: PCI Root Bridge [PC03] (domain 0000 [bus c0-ff])
[ 1.132004] acpi PNP0A08:03: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[ 1.140066] acpi PNP0A08:03: PCIe AER handled by firmware
[ 1.144133] acpi PNP0A08:03: _OSC: OS now controls [PCIeHotplug PME PCIeCapability]
[ 1.148001] acpi PNP0A08:03: FADT indicates ASPM is unsupported, using BIOS configuration
[ 1.152243] acpi PNP0A08:03: host bridge window [mem 0x63dc0000000-0xffffffffffff window] ([0x80000000000-0xffffffffffff] ignored, not CPU addressable)
[ 1.156129] PCI host bridge to bus 0000:c0
[ 1.160002] pci_bus 0000:c0: root bus resource [io 0xc000-0xffff window]
[ 1.164001] pci_bus 0000:c0: root bus resource [mem 0x90000000-0xaaffffff window]
[ 1.168001] pci_bus 0000:c0: root bus resource [mem 0x63dc0000000-0x7ffffffffff window]
[ 1.172001] pci_bus 0000:c0: root bus resource [bus c0-ff]
[ 1.180778] pci 0000:c0:07.1: enabling Extended Tags
[ 1.184349] pci 0000:c0:08.1: enabling Extended Tags
[ 1.188843] pci 0000:c1:00.0: enabling Extended Tags
[ 1.192177] pci 0000:c1:00.0: VF(n) BAR0 space: [mem 0x00000000-0x000fffff 64bit] (contains BAR0 for 16 VFs)
[ 1.196011] pci 0000:c1:00.0: VF(n) BAR2 space: [mem 0x00000000-0x00ffffff 64bit] (contains BAR2 for 16 VFs)
[ 1.200095] pci 0000:c0:01.1: PCI bridge to [bus c1]
[ 1.204170] pci 0000:c2:00.0: enabling Extended Tags
[ 1.208155] pci 0000:c2:00.2: enabling Extended Tags
[ 1.212134] pci 0000:c0:07.1: PCI bridge to [bus c2]
[ 1.216157] pci 0000:c3:00.0: enabling Extended Tags
[ 1.220174] pci 0000:c3:00.1: enabling Extended Tags
[ 1.224145] pci 0000:c0:08.1: PCI bridge to [bus c3]
[ 1.230936] SCSI subsystem initialized
[ 1.232125] pci 0000:82:00.0: vgaarb: VGA device added: decodes=io+mem,owns=none,locks=none
[ 1.236004] pci 0000:82:00.0: vgaarb: bridge control possible
[ 1.240003] pci 0000:82:00.0: vgaarb: setting as boot device (VGA legacy resources not available)
[ 1.244001] vgaarb: loaded
[ 1.248017] ACPI: bus type USB registered
[ 1.252014] usbcore: registered new interface driver usbfs
[ 1.256007] usbcore: registered new interface driver hub
[ 1.264164] usbcore: registered new device driver usb
[ 1.268158] EDAC MC: Ver: 3.0.0
[ 1.272173] Registered efivars operations
[ 1.300831] PCI: Using ACPI for IRQ routing
[ 1.324680] NetLabel: Initializing
[ 1.328002] NetLabel: domain hash size = 128
[ 1.332000] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
[ 1.336014] NetLabel: unlabeled traffic allowed by default
[ 1.340123] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 1.344002] hpet0: 3 comparators, 32-bit 14.318180 MHz counter
[ 1.352136] clocksource: Switched to clocksource hpet
[ 1.368683] VFS: Disk quotas dquot_6.6.0
[ 1.372718] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 1.379847] AppArmor: AppArmor Filesystem Enabled
[ 1.384628] pnp: PnP ACPI init
[ 1.387972] system 00:00: [mem 0x80000000-0x8fffffff] has been reserved
[ 1.395489] pnp: PnP ACPI: found 4 devices
[ 1.406126] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[ 1.415012] pci 0000:01:00.0: can't claim BAR 6 [mem 0xfff00000-0xffffffff pref]: no compatible bridge window
[ 1.424931] pci 0000:01:00.1: can't claim BAR 6 [mem 0xfff00000-0xffffffff pref]: no compatible bridge window
[ 1.434855] pci 0000:83:00.0: can't claim BAR 6 [mem 0xfffc0000-0xffffffff pref]: no compatible bridge window
[ 1.444780] pci 0000:c1:00.0: can't claim BAR 6 [mem 0xfff00000-0xffffffff pref]: no compatible bridge window
[ 1.454727] pci 0000:00:03.1: BAR 14: assigned [mem 0xe1000000-0xe11fffff]
[ 1.461610] pci 0000:01:00.0: BAR 6: assigned [mem 0xe1000000-0xe10fffff pref]
[ 1.468844] pci 0000:01:00.1: BAR 6: assigned [mem 0xe1100000-0xe11fffff pref]
[ 1.476075] pci 0000:00:03.1: PCI bridge to [bus 01]
[ 1.481056] pci 0000:00:03.1: bridge window [mem 0xe1000000-0xe11fffff]
[ 1.487851] pci 0000:00:03.1: bridge window [mem 0xe2000000-0xe5ffffff 64bit pref]
[ 1.495610] pci 0000:00:07.1: PCI bridge to [bus 02]
[ 1.500591] pci 0000:00:07.1: bridge window [mem 0xf7200000-0xf74fffff]
[ 1.507398] pci 0000:00:08.1: PCI bridge to [bus 03]
[ 1.512377] pci 0000:00:08.1: bridge window [mem 0xf7000000-0xf71fffff]
[ 1.519246] pci 0000:40:07.1: PCI bridge to [bus 41]
[ 1.524226] pci 0000:40:07.1: bridge window [mem 0xdb200000-0xdb4fffff]
[ 1.531029] pci 0000:40:08.1: PCI bridge to [bus 42]
[ 1.536022] pci 0000:40:08.1: bridge window [mem 0xdb000000-0xdb1fffff]
[ 1.542877] pci 0000:81:00.0: PCI bridge to [bus 82]
[ 1.547862] pci 0000:81:00.0: bridge window [mem 0xc0000000-0xc08fffff]
[ 1.554661] pci 0000:81:00.0: bridge window [mem 0xab000000-0xabffffff 64bit pref]
[ 1.562414] pci 0000:80:01.2: PCI bridge to [bus 81-82]
[ 1.567653] pci 0000:80:01.2: bridge window [mem 0xc0000000-0xc08fffff]
[ 1.574455] pci 0000:80:01.2: bridge window [mem 0xab000000-0xabffffff 64bit pref]
[ 1.582206] pci 0000:83:00.0: BAR 6: assigned [mem 0xc0d40000-0xc0d7ffff pref]
[ 1.589441] pci 0000:80:03.1: PCI bridge to [bus 83]
[ 1.594422] pci 0000:80:03.1: bridge window [io 0x8000-0x8fff]
[ 1.600525] pci 0000:80:03.1: bridge window [mem 0xc0d00000-0xc0dfffff]
[ 1.607333] pci 0000:80:07.1: PCI bridge to [bus 84]
[ 1.612311] pci 0000:80:07.1: bridge window [mem 0xc0b00000-0xc0cfffff]
[ 1.619117] pci 0000:80:08.1: PCI bridge to [bus 85]
[ 1.624097] pci 0000:80:08.1: bridge window [mem 0xc0900000-0xc0afffff]
[ 1.630942] pci 0000:c1:00.0: BAR 6: no space for [mem size 0x00100000 pref]
[ 1.638000] pci 0000:c1:00.0: BAR 6: failed to assign [mem size 0x00100000 pref]
[ 1.645409] pci 0000:c1:00.0: BAR 9: no space for [mem size 0x01000000 64bit]
[ 1.652558] pci 0000:c1:00.0: BAR 9: failed to assign [mem size 0x01000000 64bit]
[ 1.660047] pci 0000:c1:00.0: BAR 7: no space for [mem size 0x00100000 64bit]
[ 1.667194] pci 0000:c1:00.0: BAR 7: failed to assign [mem size 0x00100000 64bit]
[ 1.674682] pci 0000:c0:01.1: PCI bridge to [bus c1]
[ 1.679658] pci 0000:c0:01.1: bridge window [io 0xc000-0xcfff]
[ 1.685759] pci 0000:c0:01.1: bridge window [mem 0xa5400000-0xa55fffff]
[ 1.692559] pci 0000:c0:07.1: PCI bridge to [bus c2]
[ 1.697538] pci 0000:c0:07.1: bridge window [mem 0xa5200000-0xa53fffff]
[ 1.704343] pci 0000:c0:08.1: PCI bridge to [bus c3]
[ 1.709323] pci 0000:c0:08.1: bridge window [mem 0xa5000000-0xa51fffff]
[ 1.716124] pci 0000:c0:01.1: PCI bridge to [bus c1]
[ 1.721116] pci 0000:c0:01.1: BAR 14: assigned [mem 0x90000000-0x912fffff]
[ 1.728002] pci 0000:c1:00.0: BAR 3: assigned [mem 0x90000000-0x900fffff 64bit]
[ 1.735339] pci 0000:c1:00.0: BAR 9: assigned [mem 0x90100000-0x910fffff 64bit]
[ 1.742659] pci 0000:c1:00.0: BAR 1: assigned [mem 0x91100000-0x9110ffff 64bit]
[ 1.749982] pci 0000:c1:00.0: BAR 7: assigned [mem 0x91110000-0x9120ffff 64bit]
[ 1.757303] pci 0000:c0:01.1: PCI bridge to [bus c1]
[ 1.762285] pci 0000:c0:01.1: bridge window [io 0xc000-0xcfff]
[ 1.768388] pci 0000:c0:01.1: bridge window [mem 0x90000000-0x912fffff]
[ 1.775192] pci 0000:c0:07.1: PCI bridge to [bus c2]
[ 1.780173] pci 0000:c0:07.1: bridge window [mem 0xa5200000-0xa53fffff]
[ 1.786978] pci 0000:c0:08.1: PCI bridge to [bus c3]
[ 1.791959] pci 0000:c0:08.1: bridge window [mem 0xa5000000-0xa51fffff]
[ 1.798893] NET: Registered protocol family 2
[ 1.803774] TCP established hash table entries: 524288 (order: 10, 4194304 bytes)
[ 1.811887] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 1.818718] TCP: Hash tables configured (established 524288 bind 65536)
[ 1.825758] UDP hash table entries: 32768 (order: 8, 1048576 bytes)
[ 1.832198] UDP-Lite hash table entries: 32768 (order: 8, 1048576 bytes)
[ 1.839402] NET: Registered protocol family 1
[ 1.844646] Unpacking initramfs...
[ 2.297255] Freeing initrd memory: 29164K
[ 2.301355] AMD-Vi: IOMMU performance counters supported
[ 2.306743] AMD-Vi: IOMMU performance counters supported
[ 2.312121] AMD-Vi: IOMMU performance counters supported
[ 2.317484] AMD-Vi: IOMMU performance counters supported
[ 2.324345] iommu: Adding device 0000:00:01.0 to group 0
[ 2.330394] iommu: Adding device 0000:00:02.0 to group 1
[ 2.336553] iommu: Adding device 0000:00:03.0 to group 2
[ 2.341901] iommu: Adding device 0000:00:03.1 to group 2
[ 2.347972] iommu: Adding device 0000:00:04.0 to group 3
[ 2.354115] iommu: Adding device 0000:00:07.0 to group 4
[ 2.359466] iommu: Adding device 0000:00:07.1 to group 4
[ 2.365586] iommu: Adding device 0000:00:08.0 to group 5
[ 2.370932] iommu: Adding device 0000:00:08.1 to group 5
[ 2.376998] iommu: Adding device 0000:00:14.0 to group 6
[ 2.382344] iommu: Adding device 0000:00:14.3 to group 6
[ 2.388533] iommu: Adding device 0000:00:18.0 to group 7
[ 2.393879] iommu: Adding device 0000:00:18.1 to group 7
[ 2.399225] iommu: Adding device 0000:00:18.2 to group 7
[ 2.404564] iommu: Adding device 0000:00:18.3 to group 7
[ 2.409911] iommu: Adding device 0000:00:18.4 to group 7
[ 2.415257] iommu: Adding device 0000:00:18.5 to group 7
[ 2.420600] iommu: Adding device 0000:00:18.6 to group 7
[ 2.425944] iommu: Adding device 0000:00:18.7 to group 7
[ 2.432107] iommu: Adding device 0000:00:19.0 to group 8
[ 2.437454] iommu: Adding device 0000:00:19.1 to group 8
[ 2.442800] iommu: Adding device 0000:00:19.2 to group 8
[ 2.448138] iommu: Adding device 0000:00:19.3 to group 8
[ 2.453477] iommu: Adding device 0000:00:19.4 to group 8
[ 2.458818] iommu: Adding device 0000:00:19.5 to group 8
[ 2.464164] iommu: Adding device 0000:00:19.6 to group 8
[ 2.469512] iommu: Adding device 0000:00:19.7 to group 8
[ 2.475704] iommu: Adding device 0000:00:1a.0 to group 9
[ 2.481050] iommu: Adding device 0000:00:1a.1 to group 9
[ 2.486394] iommu: Adding device 0000:00:1a.2 to group 9
[ 2.491746] iommu: Adding device 0000:00:1a.3 to group 9
[ 2.497090] iommu: Adding device 0000:00:1a.4 to group 9
[ 2.502436] iommu: Adding device 0000:00:1a.5 to group 9
[ 2.507785] iommu: Adding device 0000:00:1a.6 to group 9
[ 2.513133] iommu: Adding device 0000:00:1a.7 to group 9
[ 2.519263] iommu: Adding device 0000:00:1b.0 to group 10
[ 2.524694] iommu: Adding device 0000:00:1b.1 to group 10
[ 2.530127] iommu: Adding device 0000:00:1b.2 to group 10
[ 2.535562] iommu: Adding device 0000:00:1b.3 to group 10
[ 2.540993] iommu: Adding device 0000:00:1b.4 to group 10
[ 2.546428] iommu: Adding device 0000:00:1b.5 to group 10
[ 2.551861] iommu: Adding device 0000:00:1b.6 to group 10
[ 2.557296] iommu: Adding device 0000:00:1b.7 to group 10
[ 2.562758] iommu: Adding device 0000:01:00.0 to group 2
[ 2.568117] iommu: Adding device 0000:01:00.1 to group 2
[ 2.573454] iommu: Adding device 0000:02:00.0 to group 4
[ 2.578787] iommu: Adding device 0000:02:00.2 to group 4
[ 2.584123] iommu: Adding device 0000:02:00.3 to group 4
[ 2.589457] iommu: Adding device 0000:03:00.0 to group 5
[ 2.594791] iommu: Adding device 0000:03:00.1 to group 5
[ 2.600945] iommu: Adding device 0000:40:01.0 to group 11
[ 2.607062] iommu: Adding device 0000:40:02.0 to group 12
[ 2.613257] iommu: Adding device 0000:40:03.0 to group 13
[ 2.619411] iommu: Adding device 0000:40:04.0 to group 14
[ 2.625651] iommu: Adding device 0000:40:07.0 to group 15
[ 2.631091] iommu: Adding device 0000:40:07.1 to group 15
[ 2.637206] iommu: Adding device 0000:40:08.0 to group 16
[ 2.642642] iommu: Adding device 0000:40:08.1 to group 16
[ 2.648069] iommu: Adding device 0000:41:00.0 to group 15
[ 2.653494] iommu: Adding device 0000:41:00.2 to group 15
[ 2.658918] iommu: Adding device 0000:41:00.3 to group 15
[ 2.664342] iommu: Adding device 0000:42:00.0 to group 16
[ 2.669758] iommu: Adding device 0000:42:00.1 to group 16
[ 2.675907] iommu: Adding device 0000:80:01.0 to group 17
[ 2.681349] iommu: Adding device 0000:80:01.2 to group 17
[ 2.687382] iommu: Adding device 0000:80:02.0 to group 18
[ 2.693530] iommu: Adding device 0000:80:03.0 to group 19
[ 2.698969] iommu: Adding device 0000:80:03.1 to group 19
[ 2.705026] iommu: Adding device 0000:80:04.0 to group 20
[ 2.711151] iommu: Adding device 0000:80:07.0 to group 21
[ 2.716595] iommu: Adding device 0000:80:07.1 to group 21
[ 2.722659] iommu: Adding device 0000:80:08.0 to group 22
[ 2.728095] iommu: Adding device 0000:80:08.1 to group 22
[ 2.733526] iommu: Adding device 0000:81:00.0 to group 17
[ 2.738944] iommu: Adding device 0000:82:00.0 to group 17
[ 2.744367] iommu: Adding device 0000:83:00.0 to group 19
[ 2.749789] iommu: Adding device 0000:84:00.0 to group 21
[ 2.755212] iommu: Adding device 0000:84:00.2 to group 21
[ 2.760638] iommu: Adding device 0000:85:00.0 to group 22
[ 2.766065] iommu: Adding device 0000:85:00.1 to group 22
[ 2.771486] iommu: Adding device 0000:85:00.2 to group 22
[ 2.777632] iommu: Adding device 0000:c0:01.0 to group 23
[ 2.783070] iommu: Adding device 0000:c0:01.1 to group 23
[ 2.789159] iommu: Adding device 0000:c0:02.0 to group 24
[ 2.795285] iommu: Adding device 0000:c0:03.0 to group 25
[ 2.801441] iommu: Adding device 0000:c0:04.0 to group 26
[ 2.807508] iommu: Adding device 0000:c0:07.0 to group 27
[ 2.812952] iommu: Adding device 0000:c0:07.1 to group 27
[ 2.819059] iommu: Adding device 0000:c0:08.0 to group 28
[ 2.824504] iommu: Adding device 0000:c0:08.1 to group 28
[ 2.829932] iommu: Adding device 0000:c1:00.0 to group 23
[ 2.835354] iommu: Adding device 0000:c2:00.0 to group 27
[ 2.840776] iommu: Adding device 0000:c2:00.2 to group 27
[ 2.846206] iommu: Adding device 0000:c3:00.0 to group 28
[ 2.851627] iommu: Adding device 0000:c3:00.1 to group 28
[ 2.857254] AMD-Vi: Found IOMMU at 0000:00:00.2 cap 0x40
[ 2.862579] AMD-Vi: Extended features (0xf77ef22294ada):
[ 2.867901] PPR NX GT IA GA PC GA_vAPIC
[ 2.871845] AMD-Vi: Found IOMMU at 0000:40:00.2 cap 0x40
[ 2.877165] AMD-Vi: Extended features (0xf77ef22294ada):
[ 2.882486] PPR NX GT IA GA PC GA_vAPIC
[ 2.886420] AMD-Vi: Found IOMMU at 0000:80:00.2 cap 0x40
[ 2.891743] AMD-Vi: Extended features (0xf77ef22294ada):
[ 2.897066] PPR NX GT IA GA PC GA_vAPIC
[ 2.901006] AMD-Vi: Found IOMMU at 0000:c0:00.2 cap 0x40
[ 2.906330] AMD-Vi: Extended features (0xf77ef22294ada):
[ 2.911651] PPR NX GT IA GA PC GA_vAPIC
[ 2.915591] AMD-Vi: Interrupt remapping enabled
[ 2.920135] AMD-Vi: virtual APIC enabled
[ 2.924563] AMD-Vi: Lazy IO/TLB flushing enabled
[ 2.930188] amd_uncore: AMD NB counters detected
[ 2.934843] amd_uncore: AMD LLC counters detected
[ 2.942069] perf/amd_iommu: Detected AMD IOMMU #0 (2 banks, 4 counters/bank).
[ 2.949230] perf/amd_iommu: Detected AMD IOMMU #1 (2 banks, 4 counters/bank).
[ 2.956399] perf/amd_iommu: Detected AMD IOMMU #2 (2 banks, 4 counters/bank).
[ 2.963566] perf/amd_iommu: Detected AMD IOMMU #3 (2 banks, 4 counters/bank).
[ 2.970782] Scanning for low memory corruption every 60 seconds
[ 2.978454] Initialise system trusted keyrings
[ 2.982929] Key type blacklist registered
[ 2.987163] workingset: timestamp_bits=36 max_order=24 bucket_order=0
[ 2.994530] zbud: loaded
[ 2.997939] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 3.004000] fuse init (API version 7.26)
[ 3.011244] Key type asymmetric registered
[ 3.015354] Asymmetric key parser 'x509' registered
[ 3.020280] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 246)
[ 3.027847] io scheduler noop registered
[ 3.031786] io scheduler deadline registered
[ 3.036133] io scheduler cfq registered (default)
[ 3.049788] pcieport 0000:00:03.1: Signaling PME with IRQ 30
[ 3.055476] pcieport 0000:00:07.1: Signaling PME with IRQ 31
[ 3.061173] pcieport 0000:00:08.1: Signaling PME with IRQ 33
[ 3.066870] pcieport 0000:40:07.1: Signaling PME with IRQ 34
[ 3.072564] pcieport 0000:40:08.1: Signaling PME with IRQ 36
[ 3.078264] pcieport 0000:80:01.2: Signaling PME with IRQ 37
[ 3.083956] pcieport 0000:80:03.1: Signaling PME with IRQ 38
[ 3.089643] pcieport 0000:80:07.1: Signaling PME with IRQ 40
[ 3.095333] pcieport 0000:80:08.1: Signaling PME with IRQ 42
[ 3.101031] pcieport 0000:c0:01.1: Signaling PME with IRQ 43
[ 3.106721] pcieport 0000:c0:07.1: Signaling PME with IRQ 45
[ 3.112413] pcieport 0000:c0:08.1: Signaling PME with IRQ 47
[ 3.118104] dpc: probe of 0000:00:03.1:pcie010 failed with error -524
[ 3.124556] dpc: probe of 0000:80:01.2:pcie010 failed with error -524
[ 3.131009] dpc: probe of 0000:80:03.1:pcie010 failed with error -524
[ 3.137458] dpc: probe of 0000:c0:01.1:pcie010 failed with error -524
[ 3.144181] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[ 3.152553] ACPI: Power Button [PWRB]
[ 3.156275] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[ 3.163756] ACPI: Power Button [PWRF]
[ 3.169805] GHES: APEI firmware first mode is enabled by APEI bit and WHEA _OSC.
[ 3.177329] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[ 3.204585] 00:02: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[ 3.232843] 00:03: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A
[ 3.241803] Linux agpgart interface v0.103
[ 3.256035] loop: module loaded
[ 3.259389] libphy: Fixed MDIO Bus: probed
[ 3.263502] tun: Universal TUN/TAP device driver, 1.6
[ 3.268596] PPP generic driver version 2.4.2
[ 3.272944] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 3.279485] ehci-pci: EHCI PCI platform driver
[ 3.283949] ehci-platform: EHCI generic platform driver
[ 3.289198] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 3.295386] ohci-pci: OHCI PCI platform driver
[ 3.299849] ohci-platform: OHCI generic platform driver
[ 3.305092] uhci_hcd: USB Universal Host Controller Interface driver
[ 3.311595] xhci_hcd 0000:02:00.3: xHCI Host Controller
[ 3.316832] xhci_hcd 0000:02:00.3: new USB bus registered, assigned bus number 1
[ 3.324354] xhci_hcd 0000:02:00.3: hcc params 0x0270f665 hci version 0x100 quirks 0x00000410
[ 3.333184] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 3.339986] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.347214] usb usb1: Product: xHCI Host Controller
[ 3.352102] usb usb1: Manufacturer: Linux 4.15.0-20-generic xhci-hcd
[ 3.358463] usb usb1: SerialNumber: 0000:02:00.3
[ 3.363181] hub 1-0:1.0: USB hub found
[ 3.366950] hub 1-0:1.0: 2 ports detected
[ 3.371305] xhci_hcd 0000:02:00.3: xHCI Host Controller
[ 3.376544] xhci_hcd 0000:02:00.3: new USB bus registered, assigned bus number 2
[ 3.383967] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
[ 3.392076] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
[ 3.398876] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.406103] usb usb2: Product: xHCI Host Controller
[ 3.410991] usb usb2: Manufacturer: Linux 4.15.0-20-generic xhci-hcd
[ 3.417352] usb usb2: SerialNumber: 0000:02:00.3
[ 3.422068] hub 2-0:1.0: USB hub found
[ 3.425849] hub 2-0:1.0: 2 ports detected
[ 3.430306] xhci_hcd 0000:41:00.3: xHCI Host Controller
[ 3.435552] xhci_hcd 0000:41:00.3: new USB bus registered, assigned bus number 3
[ 3.443065] xhci_hcd 0000:41:00.3: hcc params 0x0270f665 hci version 0x100 quirks 0x00000410
[ 3.451920] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
[ 3.458720] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.465956] usb usb3: Product: xHCI Host Controller
[ 3.470851] usb usb3: Manufacturer: Linux 4.15.0-20-generic xhci-hcd
[ 3.477213] usb usb3: SerialNumber: 0000:41:00.3
[ 3.481963] hub 3-0:1.0: USB hub found
[ 3.485737] hub 3-0:1.0: 2 ports detected
[ 3.490115] xhci_hcd 0000:41:00.3: xHCI Host Controller
[ 3.495352] xhci_hcd 0000:41:00.3: new USB bus registered, assigned bus number 4
[ 3.502764] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM.
[ 3.510878] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
[ 3.517677] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.524913] usb usb4: Product: xHCI Host Controller
[ 3.529800] usb usb4: Manufacturer: Linux 4.15.0-20-generic xhci-hcd
[ 3.536162] usb usb4: SerialNumber: 0000:41:00.3
[ 3.540888] hub 4-0:1.0: USB hub found
[ 3.544662] hub 4-0:1.0: 2 ports detected
[ 3.549022] i8042: PNP: No PS/2 controller found.
[ 3.553819] mousedev: PS/2 mouse device common for all mice
[ 3.559522] rtc_cmos 00:01: RTC can wake from S4
[ 3.564357] rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
[ 3.570531] rtc_cmos 00:01: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[ 3.578196] i2c /dev entries driver
[ 3.581775] device-mapper: uevent: version 1.0.3
[ 3.586490] device-mapper: ioctl: 4.37.0-ioctl (2017-09-20) initialised: dm-devel@redhat.com
[ 3.596548] ledtrig-cpu: registered to indicate activity on CPUs
[ 3.602575] EFI Variables Facility v0.08 2004-May-17
[ 3.632945] NET: Registered protocol family 10
[ 3.641386] Segment Routing with IPv6
[ 3.645079] NET: Registered protocol family 17
[ 3.649607] Key type dns_resolver registered
[ 3.656723] RAS: Correctable Errors collector initialized.
[ 3.662251] microcode: CPU0: patch_level=0x08001227
[ 3.667139] microcode: CPU1: patch_level=0x08001227
[ 3.672025] microcode: CPU2: patch_level=0x08001227
[ 3.676925] microcode: CPU3: patch_level=0x08001227
[ 3.681818] microcode: CPU4: patch_level=0x08001227
[ 3.686720] microcode: CPU5: patch_level=0x08001227
[ 3.691617] microcode: CPU6: patch_level=0x08001227
[ 3.696514] microcode: CPU7: patch_level=0x08001227
[ 3.701397] microcode: CPU8: patch_level=0x08001227
[ 3.706302] microcode: CPU9: patch_level=0x08001227
[ 3.711191] microcode: CPU10: patch_level=0x08001227
[ 3.712044] usb 1-1: new high-speed USB device number 2 using xhci_hcd
[ 3.722700] microcode: CPU11: patch_level=0x08001227
[ 3.727670] microcode: CPU12: patch_level=0x08001227
[ 3.732649] microcode: CPU13: patch_level=0x08001227
[ 3.737633] microcode: CPU14: patch_level=0x08001227
[ 3.742615] microcode: CPU15: patch_level=0x08001227
[ 3.747591] microcode: CPU16: patch_level=0x08001227
[ 3.752563] microcode: CPU17: patch_level=0x08001227
[ 3.757549] microcode: CPU18: patch_level=0x08001227
[ 3.762534] microcode: CPU19: patch_level=0x08001227
[ 3.767515] microcode: CPU20: patch_level=0x08001227
[ 3.772490] microcode: CPU21: patch_level=0x08001227
[ 3.777473] microcode: CPU22: patch_level=0x08001227
[ 3.782447] microcode: CPU23: patch_level=0x08001227
[ 3.787422] microcode: CPU24: patch_level=0x08001227
[ 3.792391] microcode: CPU25: patch_level=0x08001227
[ 3.797371] microcode: CPU26: patch_level=0x08001227
[ 3.802344] microcode: CPU27: patch_level=0x08001227
[ 3.807317] microcode: CPU28: patch_level=0x08001227
[ 3.812294] microcode: CPU29: patch_level=0x08001227
[ 3.817271] microcode: CPU30: patch_level=0x08001227
[ 3.822252] microcode: CPU31: patch_level=0x08001227
[ 3.824035] usb 3-1: new high-speed USB device number 2 using xhci_hcd
[ 3.833749] microcode: CPU32: patch_level=0x08001227
[ 3.838726] microcode: CPU33: patch_level=0x08001227
[ 3.843702] microcode: CPU34: patch_level=0x08001227
[ 3.848677] microcode: CPU35: patch_level=0x08001227
[ 3.853648] microcode: CPU36: patch_level=0x08001227
[ 3.858625] microcode: CPU37: patch_level=0x08001227
[ 3.862855] usb 1-1: New USB device found, idVendor=0424, idProduct=2744
[ 3.862857] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 3.862858] usb 1-1: Product: USB2734
[ 3.862859] usb 1-1: Manufacturer: Microchip Tech
[ 3.864127] hub 1-1:1.0: USB hub found
[ 3.864471] hub 1-1:1.0: 4 ports detected
[ 3.893570] microcode: CPU38: patch_level=0x08001227
[ 3.898544] microcode: CPU39: patch_level=0x08001227
[ 3.903517] microcode: CPU40: patch_level=0x08001227
[ 3.908492] microcode: CPU41: patch_level=0x08001227
[ 3.913468] microcode: CPU42: patch_level=0x08001227
[ 3.918441] microcode: CPU43: patch_level=0x08001227
[ 3.923416] microcode: CPU44: patch_level=0x08001227
[ 3.928391] microcode: CPU45: patch_level=0x08001227
[ 3.933366] microcode: CPU46: patch_level=0x08001227
[ 3.938339] microcode: CPU47: patch_level=0x08001227
[ 3.943348] microcode: Microcode Update Driver: v2.2.
[ 3.943360] sched_clock: Marking stable (3943336677, 0)->(4341987311, -398650634)
[ 3.956597] registered taskstats version 1
[ 3.960719] Loading compiled-in X.509 certificates
[ 3.967290] Loaded X.509 cert 'Build time autogenerated kernel key: f4ad6a5babf67650e4ceb385fa5dda8e4a178208'
[ 3.973035] usb 3-1: New USB device found, idVendor=1604, idProduct=10c0
[ 3.973037] usb 3-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 3.982924] hub 3-1:1.0: USB hub found
[ 3.983284] hub 3-1:1.0: 4 ports detected
[ 3.988106] usb 2-1: new SuperSpeed USB device number 2 using xhci_hcd
[ 4.000029] tsc: Refined TSC clocksource calibration: 1996.247 MHz
[ 4.000094] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x398caa9ddcb, max_idle_ns: 881590739785 ns
[ 4.011224] usb 2-1: New USB device found, idVendor=0424, idProduct=5744
[ 4.011225] usb 2-1: New USB device strings: Mfr=2, Product=3, SerialNumber=0
[ 4.011227] usb 2-1: Product: USB5734
[ 4.011228] usb 2-1: Manufacturer: Microchip Tech
[ 4.024119] hub 2-1:1.0: USB hub found
[ 4.024471] hub 2-1:1.0: 4 ports detected
[ 4.025739] usb: port power management may be unreliable
[ 4.057764] Loaded UEFI:db cert 'Microsoft Corporation UEFI CA 2011: 13adbf4309bd82709c8cd54f316ed522988a1bd4' linked to secondary sys keyring
[ 4.070561] Loaded UEFI:db cert 'Microsoft Windows Production PCA 2011: a92902398e16c49778cd90f99e4f9ae17c55af53' linked to secondary sys keyring
[ 4.084790] Loaded UEFI:db cert 'VMware, Inc.: 4ad8ba0472073d28127706ddc6ccb9050441bbc7' linked to secondary sys keyring
[ 4.095833] Loaded UEFI:db cert 'VMware, Inc.: VMware Secure Boot Signing: 04597f3e1ffb240bba0ff0f05d5eb05f3e15f6d7' linked to secondary sys keyring
[ 4.109381] Couldn't get size: 0x800000000000000e
[ 4.114096] MODSIGN: Couldn't get UEFI MokListRT
[ 4.119640] zswap: loaded using pool lzo/zbud
[ 4.126852] Key type big_key registered
[ 4.130706] Key type trusted registered
[ 4.135725] Key type encrypted registered
[ 4.139750] AppArmor: AppArmor sha1 policy hashing enabled
[ 4.145252] ima: No TPM chip found, activating TPM-bypass! (rc=-19)
[ 4.151541] evm: HMAC attrs: 0x1
[ 4.156119] Magic number: 6:598:347
[ 4.159958] pci0000:00: hash matches
[ 4.163656] acpi ACPI0007:09: hash matches
[ 4.167914] rtc_cmos 00:01: setting system clock to 2018-10-01 21:20:34 UTC (1538428834)
[ 4.177842] powernow_k8: This CPU is not supported anymore, using acpi-cpufreq instead.
[ 4.186473] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 4.192487] EDD information not available.
[ 4.200096] Freeing unused kernel memory: 2404K
[ 4.204635] Write protecting the kernel read-only data: 20480k
[ 4.211122] Freeing unused kernel memory: 2008K
[ 4.219980] Freeing unused kernel memory: 1904K
[ 4.231885] x86/mm: Checked W+X mappings: passed, no W+X pages found.
Loading, please wait...
starting version 237
[ 4.341075] pps_core: LinuxPPS API ver. 1 registered
[ 4.346066] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 4.355964] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0
[ 4.363367] piix4_smbus 0000:00:14.0: Using register 0x02 for SMBus port selection
[ 4.374171] PTP clock support registered
[ 4.379212] ahci 0000:83:00.0: controller can do FBS, turning on CAP_FBS
[ 4.392284] mpt3sas version 17.100.00.00 loaded
[ 4.396103] ahci 0000:83:00.0: AHCI 0001.0200 32 slots 3 ports 6 Gbps 0x7 impl SATA mode
[ 4.396105] ahci 0000:83:00.0: flags: 64bit ncq fbs pio
[ 4.396529] scsi host0: ahci
[ 4.396679] scsi host1: ahci
[ 4.396810] scsi host2: ahci
[ 4.396850] ata1: SATA max UDMA/133 abar m2048@0xc0d00000 port 0xc0d00100 irq 67
[ 4.396852] ata2: SATA max UDMA/133 abar m2048@0xc0d00000 port 0xc0d00180 irq 67
[ 4.396854] ata3: SATA max UDMA/133 abar m2048@0xc0d00000 port 0xc0d00200 irq 67
[ 4.397083] ahci 0000:85:00.2: AHCI 0001.0301 32 slots 1 ports 6 Gbps 0x1 impl SATA mode
[ 4.397085] ahci 0000:85:00.2: flags: 64bit ncq sntf ilck pm led clo only pmp fbs pio slum part
[ 4.397291] scsi host3: ahci
[ 4.397328] ata4: SATA max UDMA/133 abar m4096@0xc0a02000 port 0xc0a02100 irq 69
[ 4.468730] mpt3sas_cm0: 64 BIT PCI BUS DMA ADDRESSING SUPPORTED, total mem (65685960 kB)
[ 4.469420] mlx5_core 0000:01:00.0: firmware version: 14.20.1820
[ 4.493477] [TTM] Zone kernel: Available graphics memory: 32842980 kiB
[ 4.500115] [TTM] Zone dma32: Available graphics memory: 2097152 kiB
[ 4.506647] [TTM] Initializing pool allocator
[ 4.511222] [TTM] Initializing DMA pool allocator
[ 4.541157] mpt3sas_cm0: CurrentHostPageSize is 0: Setting default host page size to 4k
[ 4.549187] mpt3sas_cm0: MSI-X vectors supported: 96, no of cores: 48, max_msix_vectors: -1
[ 4.557551] fbcon: mgadrmfb (fb0) is primary device
[ 4.557602] Console: switching to colour frame buffer device 128x48
[ 4.559648] mpt3sas0-msix0: PCI-MSI-X enabled: IRQ 73
[ 4.559649] mpt3sas0-msix1: PCI-MSI-X enabled: IRQ 74
[ 4.559650] mpt3sas0-msix2: PCI-MSI-X enabled: IRQ 75
[ 4.559650] mpt3sas0-msix3: PCI-MSI-X enabled: IRQ 76
[ 4.559651] mpt3sas0-msix4: PCI-MSI-X enabled: IRQ 77
[ 4.559651] mpt3sas0-msix5: PCI-MSI-X enabled: IRQ 78
[ 4.559652] mpt3sas0-msix6: PCI-MSI-X enabled: IRQ 79
[ 4.559653] mpt3sas0-msix7: PCI-MSI-X enabled: IRQ 80
[ 4.559653] mpt3sas0-msix8: PCI-MSI-X enabled: IRQ 81
[ 4.559653] mpt3sas0-msix9: PCI-MSI-X enabled: IRQ 82
[ 4.559654] mpt3sas0-msix10: PCI-MSI-X enabled: IRQ 83
[ 4.559654] mpt3sas0-msix11: PCI-MSI-X enabled: IRQ 84
[ 4.559655] mpt3sas0-msix12: PCI-MSI-X enabled: IRQ 85
[ 4.559655] mpt3sas0-msix13: PCI-MSI-X enabled: IRQ 86
[ 4.559656] mpt3sas0-msix14: PCI-MSI-X enabled: IRQ 87
[ 4.559656] mpt3sas0-msix15: PCI-MSI-X enabled: IRQ 88
[ 4.559657] mpt3sas0-msix16: PCI-MSI-X enabled: IRQ 89
[ 4.559657] mpt3sas0-msix17: PCI-MSI-X enabled: IRQ 90
[ 4.559658] mpt3sas0-msix18: PCI-MSI-X enabled: IRQ 91
[ 4.559658] mpt3sas0-msix19: PCI-MSI-X enabled: IRQ 92
[ 4.559658] mpt3sas0-msix20: PCI-MSI-X enabled: IRQ 93
[ 4.559659] mpt3sas0-msix21: PCI-MSI-X enabled: IRQ 94
[ 4.559659] mpt3sas0-msix22: PCI-MSI-X enabled: IRQ 95
[ 4.559660] mpt3sas0-msix23: PCI-MSI-X enabled: IRQ 96
[ 4.559660] mpt3sas0-msix24: PCI-MSI-X enabled: IRQ 97
[ 4.559661] mpt3sas0-msix25: PCI-MSI-X enabled: IRQ 98
[ 4.559661] mpt3sas0-msix26: PCI-MSI-X enabled: IRQ 99
[ 4.559662] mpt3sas0-msix27: PCI-MSI-X enabled: IRQ 100
[ 4.559662] mpt3sas0-msix28: PCI-MSI-X enabled: IRQ 101
[ 4.559663] mpt3sas0-msix29: PCI-MSI-X enabled: IRQ 102
[ 4.559663] mpt3sas0-msix30: PCI-MSI-X enabled: IRQ 103
[ 4.559664] mpt3sas0-msix31: PCI-MSI-X enabled: IRQ 104
[ 4.559664] mpt3sas0-msix32: PCI-MSI-X enabled: IRQ 105
[ 4.559664] mpt3sas0-msix33: PCI-MSI-X enabled: IRQ 106
[ 4.559665] mpt3sas0-msix34: PCI-MSI-X enabled: IRQ 107
[ 4.559665] mpt3sas0-msix35: PCI-MSI-X enabled: IRQ 108
[ 4.559666] mpt3sas0-msix36: PCI-MSI-X enabled: IRQ 109
[ 4.559666] mpt3sas0-msix37: PCI-MSI-X enabled: IRQ 110
[ 4.559667] mpt3sas0-msix38: PCI-MSI-X enabled: IRQ 111
[ 4.559667] mpt3sas0-msix39: PCI-MSI-X enabled: IRQ 112
[ 4.559668] mpt3sas0-msix40: PCI-MSI-X enabled: IRQ 113
[ 4.559668] mpt3sas0-msix41: PCI-MSI-X enabled: IRQ 114
[ 4.559669] mpt3sas0-msix42: PCI-MSI-X enabled: IRQ 115
[ 4.559669] mpt3sas0-msix43: PCI-MSI-X enabled: IRQ 116
[ 4.559670] mpt3sas0-msix44: PCI-MSI-X enabled: IRQ 117
[ 4.559670] mpt3sas0-msix45: PCI-MSI-X enabled: IRQ 118
[ 4.559671] mpt3sas0-msix46: PCI-MSI-X enabled: IRQ 119
[ 4.559671] mpt3sas0-msix47: PCI-MSI-X enabled: IRQ 120
[ 4.559673] mpt3sas_cm0: iomem(0x0000000091100000), mapped(0x00000000ea03e573), size(65536)
[ 4.559673] mpt3sas_cm0: ioport(0x000000000000c000), size(256)
[ 4.617787] mpt3sas_cm0: CurrentHostPageSize is 0: Setting default host page size to 4k
[ 4.617789] mpt3sas_cm0: sending message unit reset !!
[ 4.619304] mpt3sas_cm0: message unit reset: SUCCESS
[ 4.676862] mpt3sas_cm0: Allocated physical memory: size(23273 kB)
[ 4.676863] mpt3sas_cm0: Current Controller Queue Depth(9548),Max Controller Queue Depth(9680)
[ 4.676864] mpt3sas_cm0: Scatter Gather Elements per IO(128)
[ 4.692032] usb 3-1.1: new high-speed USB device number 3 using xhci_hcd
[ 4.710394] ata4: SATA link down (SStatus 0 SControl 300)
[ 4.710397] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 4.710423] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 4.723222] mpt3sas_cm0: LSISAS3008: FWVersion(15.15.06.00), ChipRevision(0x02), BiosVersion(17.07.01.00)
[ 4.723223] mpt3sas_cm0: Protocol=(
[ 4.723224] Initiator
[ 4.723225] ,Target
[ 4.723225] ),
[ 4.723225] Capabilities=(
[ 4.723226] TLR
[ 4.723227] ,EEDP
[ 4.723227] ,Snapshot Buffer
[ 4.723227] ,Diag Trace Buffer
[ 4.723228] ,Task Set Full
[ 4.723228] ,NCQ
[ 4.723228] )
[ 4.723279] scsi host4: Fusion MPT SAS Host
[ 4.723989] mpt3sas_cm0: sending port enable !!
[ 4.725448] mpt3sas_cm0: host_add: handle(0x0001), sas_addr(0x5d094660405e5f00), phys(8)
[ 4.727561] scsi 4:0:0:0: Direct-Access ATA SSDSC2BB480G7R DL43 PQ: 0 ANSI: 6
[ 4.727566] scsi 4:0:0:0: SATA: handle(0x000a), sas_addr(0x4433221100000000), phy(0), device_name(0x55cd2e414d7e145e)
[ 4.727568] scsi 4:0:0:0: enclosure logical id (0x5d094660405e5f00), slot(1)
[ 4.727569] scsi 4:0:0:0: enclosure level(0x0001), connector name( )
[ 4.727620] scsi 4:0:0:0: atapi(n), ncq(y), asyn_notify(n), smart(y), fua(y), sw_preserve(y)
[ 4.730438] scsi 4:0:1:0: Direct-Access ATA SSDSC2BB480G7R DL43 PQ: 0 ANSI: 6
[ 4.730440] scsi 4:0:1:0: SATA: handle(0x000b), sas_addr(0x4433221104000000), phy(4), device_name(0x55cd2e414d7e1471)
[ 4.730442] scsi 4:0:1:0: enclosure logical id (0x5d094660405e5f00), slot(0)
[ 4.730443] scsi 4:0:1:0: enclosure level(0x0001), connector name( )
[ 4.730493] scsi 4:0:1:0: atapi(n), ncq(y), asyn_notify(n), smart(y), fua(y), sw_preserve(y)
[ 4.740023] mpt3sas_cm0: port enable: SUCCESS
[ 4.740294] sd 4:0:0:0: Attached scsi generic sg0 type 0
[ 4.740506] sd 4:0:1:0: Attached scsi generic sg1 type 0
[ 4.742646] sd 4:0:0:0: [sda] 937703088 512-byte logical blocks: (480 GB/447 GiB)
[ 4.742648] sd 4:0:0:0: [sda] 4096-byte physical blocks
[ 4.742863] sd 4:0:1:0: [sdb] 937703088 512-byte logical blocks: (480 GB/447 GiB)
[ 4.742865] sd 4:0:1:0: [sdb] 4096-byte physical blocks
[ 4.743393] sd 4:0:0:0: [sda] Write Protect is off
[ 4.743608] sd 4:0:1:0: [sdb] Write Protect is off
[ 4.744051] sd 4:0:0:0: [sda] Write cache: enabled, read cache: enabled, supports DPO and FUA
[ 4.744262] sd 4:0:1:0: [sdb] Write cache: enabled, read cache: enabled, supports DPO and FUA
[ 4.755142] sd 4:0:0:0: [sda] Attached SCSI disk
[ 4.755348] sd 4:0:1:0: [sdb] Attached SCSI disk
[ 4.793030] usb 3-1.1: New USB device found, idVendor=1604, idProduct=10c0
[ 4.793033] usb 3-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 4.814923] hub 3-1.1:1.0: USB hub found
[ 4.815276] hub 3-1.1:1.0: 4 ports detected
[ 4.824194] ata3.00: ATAPI: MARVELL VIRTUAL, 1.09, max UDMA/66
[ 4.824307] ata3.00: configured for UDMA/66
[ 4.824464] ata1.00: ATA-10: SSDSCKJB120G7R, N201DL43, max UDMA/133
[ 4.824466] ata1.00: 234441648 sectors, multi 1: LBA48 NCQ (depth 31/32)
[ 4.824884] ata1.00: configured for UDMA/133
[ 4.825437] scsi 0:0:0:0: Direct-Access ATA SSDSCKJB120G7R DL43 PQ: 0 ANSI: 5
[ 4.825677] sd 0:0:0:0: Attached scsi generic sg2 type 0
[ 4.825738] sd 0:0:0:0: [sdc] 234441648 512-byte logical blocks: (120 GB/112 GiB)
[ 4.825740] sd 0:0:0:0: [sdc] 4096-byte physical blocks
[ 4.825755] sd 0:0:0:0: [sdc] Write Protect is off
[ 4.825792] sd 0:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 4.827080] sd 0:0:0:0: [sdc] Attached SCSI disk
[ 4.828038] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 4.828355] ata2.00: ATA-10: SSDSCKJB120G7R, N201DL43, max UDMA/133
[ 4.828357] ata2.00: 234441648 sectors, multi 1: LBA48 NCQ (depth 31/32)
[ 4.828782] ata2.00: configured for UDMA/133
[ 4.829266] scsi 1:0:0:0: Direct-Access ATA SSDSCKJB120G7R DL43 PQ: 0 ANSI: 5
[ 4.829461] sd 1:0:0:0: Attached scsi generic sg3 type 0
[ 4.829485] sd 1:0:0:0: [sdd] 234441648 512-byte logical blocks: (120 GB/112 GiB)
[ 4.829487] sd 1:0:0:0: [sdd] 4096-byte physical blocks
[ 4.829505] sd 1:0:0:0: [sdd] Write Protect is off
[ 4.829539] sd 1:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 4.830137] scsi 2:0:0:0: Processor Marvell Console 1.01 PQ: 0 ANSI: 5
[ 4.830315] scsi 2:0:0:0: Attached scsi generic sg4 type 3
[ 4.831765] sdd: sdd1 sdd2 sdd3
[ 4.832291] sd 1:0:0:0: [sdd] Attached SCSI disk
[ 4.896024] usb 3-1.4: new high-speed USB device number 4 using xhci_hcd
[ 4.997039] usb 3-1.4: New USB device found, idVendor=1604, idProduct=10c0
[ 4.997041] usb 3-1.4: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 5.006930] hub 3-1.4:1.0: USB hub found
[ 5.007285] hub 3-1.4:1.0: 4 ports detected
[ 5.028385] clocksource: Switched to clocksource tsc
[ 5.178666] (0000:01:00.0): E-Switch: Total vports 1, per vport: max uc(1024) max mc(16384)
[ 5.200951] mlx5_core 0000:01:00.0: Port module event: module 0, Cable plugged
[ 5.213430] mlx5_core 0000:01:00.1: firmware version: 14.20.1820
[ 5.769291] mgag200 0000:82:00.0: fb0: mgadrmfb frame buffer device
[ 5.800039] [drm] Initialized mgag200 1.0.0 20110418 for 0000:82:00.0 on minor 0
[ 5.923161] (0000:01:00.1): E-Switch: Total vports 1, per vport: max uc(1024) max mc(16384)
[ 5.954421] mlx5_core 0000:01:00.1: Port module event: module 1, Cable plugged
[ 5.966315] mlx5_core 0000:01:00.0: MLX5E: StrdRq(1) RqSz(8) StrdSz(64) RxCqeCmprss(0)
[ 6.157180] mlx5_core 0000:01:00.1: MLX5E: StrdRq(1) RqSz(8) StrdSz(64) RxCqeCmprss(0)
[ 6.365473] mlx5_core 0000:01:00.1 enp1s0f1: renamed from eth1
[ 6.372539] mlx5_ib: Mellanox Connect-IB Infiniband driver v5.0-0
[ 6.416731] mlx5_core 0000:01:00.0 enp1s0f0: renamed from eth0
Begin: Loading essential drivers ... [ 6.536019] raid6: sse2x1 gen() 6045 MB/s
[ 6.588011] raid6: sse2x1 xor() 5749 MB/s
[ 6.640008] raid6: sse2x2 gen() 12230 MB/s
[ 6.692014] raid6: sse2x2 xor() 7832 MB/s
[ 6.744014] raid6: sse2x4 gen() 12595 MB/s
[ 6.796012] raid6: sse2x4 xor() 7375 MB/s
[ 6.848016] raid6: avx2x1 gen() 14317 MB/s
[ 6.900011] raid6: avx2x1 xor() 10312 MB/s
[ 6.952011] raid6: avx2x2 gen() 19058 MB/s
[ 7.004011] raid6: avx2x2 xor() 11294 MB/s
[ 7.056009] raid6: avx2x4 gen() 19395 MB/s
[ 7.108009] raid6: avx2x4 xor() 10162 MB/s
[ 7.112813] raid6: using algorithm avx2x4 gen() 19395 MB/s
[ 7.118832] raid6: .... xor() 10162 MB/s, rmw enabled
[ 7.124409] raid6: using avx2x2 recovery algorithm
[ 7.131017] xor: automatically using best checksumming function avx
[ 7.139954] async_tx: api initialized (async)
done.
Begin: Running /scripts/init-premount ... done.
Begin: Mounting root file system ... Begin: Running /scripts/local-top ... done.
Begin: Running /scripts/local-premount ... [ 8.418131] random: crng init done
Begin: Waiting for suspend/resume device ... Begin: Running /scripts/local-block ... mdadm: No arrays found in config file or automatically
done.
mdadm: No arrays found in config file or automatically
mdadm: No arrays found in config file or automatically
mdadm: No arrays found in config file or automatically
mdadm: No arrays found in config file or automatically
mdadm: No arrays found in config file or automatically
mdadm: No arrays found in config file or automatically
mdadm: No arrays found in config file or automatically
mdadm: No arrays found in config file or automatically
mdadm: No arrays found in config file or automatically
mdadm: No arrays found in config file or automatically
mdadm: No arrays found in config file or automatically
mdadm: No arrays found in config file or automatically
mdadm: No arrays found in config file or automatically
mdadm: No arrays found in config file or automatically
mdadm: No arrays found in config file or automatically
mdadm: No arrays found in config file or automatically
mdadm: No arrays found in config file or automatically
mdadm: No arrays found in config file or automatically
mdadm: No arrays found in config file or automatically
mdadm: error opening /dev/md?*: No such file or directory
mdadm: No arrays found in config file or automatically
mdadm: No arrays found in config file or automatically
mdadm: No arrays found in config file or automatically
mdadm: No arrays found in config file or automatically
mdadm: No arrays found in config file or automatically
mdadm: No arrays found in config file or automatically
mdadm: No arrays found in config file or automatically
mdadm: No arrays found in config file or automatically
mdadm: No arrays found in config file or automatically
mdadm: No arrays found in config file or automatically
mdadm: No arrays found in config file or automatically
done.
Gave up waiting for suspend/resume device
done.
Warning: fsck not present, so skipping root file[ 38.596570] EXT4-fs (sdd3): mounted filesystem with ordered data mode. Opts: (null)
system
done.
Begin: Running /scripts/local-bottom ... done.
Begin: Running /scripts/init-bottom ... done.
[ 38.757313] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 38.824483] systemd[1]: systemd 237 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid)
[ 38.865468] systemd[1]: Detected architecture x86-64.
Welcome to Ubuntu 18.04 LTS!
[ 38.896714] systemd[1]: Set hostname to <myserver>.
[ 39.028813] systemd[1]: Created slice User and Session Slice.
[ OK ] Created slice User and Session Slice.
[ 39.048166] systemd[1]: Created slice System Slice.
[ OK ] Created slice System Slice.
[ 39.072099] systemd[1]: Listening on Journal Socket.
[ OK ] Listening on Journal Socket.
[ 39.092646] systemd[1]: Starting Create list of required static device nodes for the current kernel...
Starting Create list of required st…ce nodes for the current kernel...
[ 39.120640] systemd[1]: Mounting Kernel Debug File System...
Mounting Kernel Debug File System...
[ 39.140093] systemd[1]: Listening on Syslog Socket.
[ OK ] Listening on Syslog Socket.
[ 39.160119] systemd[1]: Listening on Journal Audit Socket.
[ OK ] Listening on Journal Audit Socket.
[ OK ] Started Dispatch Password Requests to Console Directory Watch.
[ OK ] Listening on udev Control Socket.
[ OK ] Reached target Slices.
Starting Load Kernel Modules...
[ 39.237043] Ethernet Channel Bonding Driver: v3.7.1 (April 27, 2011)
[ OK ] Set up automount Arbitrary Executab…rmats [ 39.249636] Loading iSCSI transport class v2.0-870.
File System Automount Point.
[ 39.262055] iscsi: registered transport (tcp)
[ OK ] Reached target System Time Synchronized.
[ 39.279274] iscsi: registered transport (iser)
Starting Set the console keyboard layout...
[ OK ] Created slice system-serial\x2dgetty.slice.
[ OK ] Listening on /dev/initctl Compatibility Named Pipe.
[ OK ] Listening on Journal Socket (/dev/log).
Starting Journal Service...
Mounting POSIX Message Queue File System...
[ OK ] Listening on udev Kernel Socket.
Starting udev Coldplug all Devices...
[ OK ] Started ntp-systemd-netif.path.
[ OK ] Started Forward Password Requests to Wall Directory Watch.
[ OK ] Reached target Local Encrypted Volumes.
[ OK ] Reached target Paths.
Mounting Huge Pages File System...
[ OK ] Listening on fsck to fsckd communication Socket.
Starting File System Check on Root Device...
[ OK ] Started Journal Service.
[ OK ] Started Create list of required sta…vice nodes for the current kernel.
[ OK ] Mounted Kernel Debug File System.
[ OK ] Started Load Kernel Modules.
[ OK ] Mounted POSIX Message Queue File System.
[ OK ] Mounted Huge Pages File System.
[ OK ] Started File System Check on Root Device.
[ OK ] Started File System Check Daemon to report status.
Starting Remount Root and Kernel File Systems...
[ 39.657674] EXT4-fs (sdd3): re-mounted. Opts: errors=remount-ro
Starting Apply Kernel Variables...
Mounting FUSE Control File System...
Mounting Kernel Configuration File System...
Starting Create Static Device Nodes in /dev...
[ OK ] Started udev Coldplug all Devices.
[ OK ] Started Remount Root and Kernel File Systems.
[ OK ] Started Apply Kernel Variables.
[ OK ] Mounted FUSE Control File System.
[ OK ] Started Set the console keyboard layout.
[ OK ] Mounted Kernel Configuration File System.
[ OK ] Started Create Static Device Nodes in /dev.
Starting Load/Save Random Seed...
Starting Flush Journal to Persistent Storage...
Starting udev Kernel Device Manager...
Starting Initial cloud-init job (pre-networking)...
Starting udev Wait for Complete Device Initialization...
[ OK ] Started udev Kernel Device Manager.
[ OK ] Started Load/Save Random Seed.
[ OK ] Started Flush Journal to Persistent Storage.
[ 40.002207] ACPI Error: No handler for Region [SYSI] (000000006fd0dd95) [IPMI] (20170831/evregion-166)
[ 40.012428] ACPI Error: Region IPMI (ID=7) has no handler (20170831/exfldio-299)
[ 40.020763] ACPI Error: Method parse/execution failed \_SB.PMI0._GHL, AE_NOT_EXIST (20170831/psparse-550)
[ 40.031204] ACPI Error: Method parse/execution failed \_SB.PMI0._PMC, AE_NOT_EXIST (20170831/psparse-550)
[ 40.041581] ACPI Exception: AE_NOT_EXIST, Evaluating _PMC (20170831/power_meter-755)
[ OK ] Found device /dev/ttyS1.
[ OK ] Found device MT27710 Family [Connec…x 25 GbE Dual Port SFP28 Adapter).
[ OK ] Found device MT27710 Family [Connec…x 25 GbE Dual Port SFP28 Adapter).
[ OK ] Listening on Load/Save RF Kill Switch Status /dev/rfkill Watch.
[ OK ] Found device SSDSCKJB120G7R SWAP.
[ OK ] Found device SSDSCKJB120G7R EFI.
Activating swap /dev/disk/by-uuid/e…b8d-7541-491f-b30e-8884ac9925fa...
[ OK ] Activated swap /dev/disk/by-uuid/ea716b8d-7541-491f-b30e-8884ac9925fa.
[ OK ] Reached target Swap.
[ 40.631891] cloud-init[1012]: Cloud-init v. 18.2 running 'init-local' at Mon, 01 Oct 2018 21:21:10 +0000. Up 40.57 seconds.
[ OK ] Started udev Wait for Complete Device Initialization.
Starting Device-Mapper Multipath Device Controller...
[ OK ] Started Initial cloud-init job (pre-networking).
[ OK ] Reached target Network (Pre).
[ OK ] Started Device-Mapper Multipath Device Controller.
[ OK ] Reached target Local File Systems (Pre).
Mounting /boot/efi...
[ OK ] Mounted /boot/efi.
[ OK ] Reached target Local File Systems.
[ OK ] Started ifup for enp1s0f0.
[ OK ] Started ifup for enp1s0f1.
Starting Set console font and keymap...
Starting Create Volatile Files and Directories...
Starting Raise network interfaces...
[ OK ] Started Create Volatile Files and Directories.
Starting Network Time Synchronization...
Starting Update UTMP about System Boot/Shutdown...
Starting Network Name Resolution...
[ OK ] Started Update UTMP about System Boot/Shutdown.
[ OK ] Started ifup for bond0.
[ OK ] Started Network Time Synchronization.
[ OK ] Started Network Name Resolution.
[ OK ] Reached target Host and Network Name Lookups.
[ OK ] Started Set console font and keymap.
[ OK ] Started Raise network interfaces.
[ OK ] Reached target Network.
Starting Initial cloud-init job (metadata service crawler)...
[ 50.914379] cloud-init[1936]: Cloud-init v. 18.2 running 'init' at Mon, 01 Oct 2018 21:21:15 +0000. Up 45.58 seconds.
[ 50.936131] cloud-init[1936]: ci-info: ++++++++++++++++++++++++++++++++++++++++Net device info++++++++++++++++++++++++++++++++++++++++
[ 50.956056] cloud-init[1936]: ci-info: +--------+------+------------------------------+-----------------+--------+-------------------+
[ 50.976051] cloud-init[1936]: ci-info: | Device | Up | Address | Mask | Scope | Hw-Address |
[ 50.996047] cloud-init[1936]: ci-info: +--------+------+------------------------------+-----------------+--------+-------------------+
[ 51.016050] cloud-init[1936]: ci-info: | bond0 | True | 147.75.83.19 | 255.255.255.254 | global | 50:6b:4b:13:c8:3e |
[ 51.036048] cloud-init[1936]: ci-info: | bond0 | True | 10.80.174.129 | 255.255.255.254 | global | 50:6b:4b:13:c8:3e |
[ 51.056100] cloud-init[1936]: ci-info: | bond0 | True | 2604:1380:2001:1f00::1/127 | . | global | 50:6b:4b:13:c8:3e |
[ 51.076057] cloud-init[1936]: ci-info: | bond0 | True | fe80::526b:4bff:fe13:c83e/64 | . | link | 50:6b:4b:13:c8:3e |
[ 51.096048] cloud-init[1936]: ci-info: | lo | True | 127.0.0.1 | 255.0.0.0 | host | . |
[ 51.116059] cloud-init[1936]: ci-info: | lo | True | ::1/128 | . | host | . |
[ 51.136055] cloud-init[1936]: ci-info: +--------+------+------------------------------+-----------------+--------+-------------------+
[ 51.156046] cloud-init[1936]: ci-info: ++++++++++++++++++++++++++++++++Route IPv4 info++++++++++++++++++++++++++++++++
[ 51.176047] cloud-init[1936]: ci-info: +-------+---------------+---------------+-----------------+-----------+-------+
[ 51.196049] cloud-init[1936]: ci-info: | Route | Destination | Gateway | Genmask | Interface | Flags |
[ 51.216047] cloud-init[1936]: ci-info: +-------+---------------+---------------+-----------------+-----------+-------+
[ 51.236046] cloud-init[1936]: ci-info: | 0 | 0.0.0.0 | 147.75.83.18 | 0.0.0.0 | bond0 | UG |
[ 51.256045] cloud-init[1936]: ci-info: | 1 | 10.0.0.0 | 10.80.174.128 | 255.0.0.0 | bond0 | UG |
[ OK ] Started Initial cloud-init job (metadata service crawler).
[ 51.276115] cloud-init[1936]: ci-info: | 2 | 10.80.174.128 | 0.0.0.0 | 255.255.255.254 | bond0 | U |
[ OK ] Reached target Network is Online.
[ 51.312204] cloud-init[1936]: ci-info: | 3 | 147.75.83.18 | 0.0.0.0 | 255.255.255.254 | bond0 | U |
Starting iSCSI initiator daemon (iscsid)...
[ 51.348134] cloud-init[1936]: ci-info: +-------+---------------+---------------+-----------------+-----------+-------+
[ OK ] Reached target System Initialization.
[ 51.384268] cloud-init[1936]: ci-info: +++++++++++++++++++++++++++++++++Route IPv6 info+++++++++++++++++++++++++++++++++
[ OK ] Started Discard unused blocks once a week.
[ 51.420106] cloud-init[1936]: ci-info: +-------+---------------------------+-----------------------+-----------+-------+
[ OK ] [ 51.456067] Listening on UUID daemon activation socket.cloud-init
[1936]: ci-info: | Route | Destination | Gateway | Interface | Flags |
[ OK [ 51.480052] ] cloud-initStarted Daily Cleanup of Temporary Directories.[1936]:
ci-info: +-------+---------------------------+-----------------------+-----------+-------+
[ OK ] [ 51.508052] Listening on D-Bus System Message Bus Socket.cloud-init
[1936]: ci-info: | 1 | 2604:1380:2001:1f00::/127 | :: | bond0 | U |
[ OK ] [ 51.532047] Reached target Sockets.cloud-init
[1936]: ci-info: | 2 | fe80::/64 | :: | bond0 | U |
[ OK ] Started Daily apt download activities.
[ 51.556111] cloud-init[1936]: ci-info: | 3 | ::/0 | 2604:1380:2001:1f00:: | bond0 | UG |
[ OK ] Started Daily apt upgrade and clean activities.
[ 51.592112] cloud-init[1936]: ci-info: | 5 | local | :: | bond0 | U |
[ OK ] [ 51.628053] Started Message of the Day.cloud-init
[1936]: ci-info: | 6 | local | :: | bond0 | U |
[ OK ] [ 51.652046] Reached target Timers.cloud-init
[1936]: ci-info: | 7 | ff00::/8 | :: | bond0 | U |
[ OK ] [ 51.676047] Reached target Basic System.cloud-init
[1936]: ci-info: +-------+---------------------------+-----------------------+-----------+-------+
[ 51.700060] cloud-init [1936]: Starting Login Service...2018-10-01 21:21:21,245 - DataSourceEc2.py[WARNING]: Metadata 'network' key not valid: None.
Starting System Logging Service...[ 51.724056]
cloud-init[1936]: 2018-10-01 21:21:21,277 - warnings.py[WARNING]: **************************************************************************
Starting Dispatcher daemon for systemd-networkd...[ 51.752052]
cloud-init[1936]: # This system is using the EC2 Metadata Service, but does not appear to #
Starting OpenBSD Secure Shell server...
[ 51.776056] cloud-init[1936]: # be running on Amazon EC2 or one of cloud-init's known platforms that #
[ OK ] Started Regular background program processing daemon.
[ 51.800069] cloud-init[1936]: # provide a EC2 Metadata service. In the future, cloud-init may stop #
Starting Resets System Activity Data Collector...
[ 51.836121] cloud-init[1936]: # reading metadata from the EC2 Metadata Service unless the platform can #
Starting LSB: Record successful boot for GRUB...
[ 51.876109] cloud-init[1936]: # be identified. #
[ OK ] Started ntp-systemd-netif.service.
[ 51.916151] cloud-init[1936]: # #
[ OK ] Started Unattended Upgrades Shutdown.
[ 51.952111] cloud-init[1936]: # If you are seeing this message, please file a bug against #
[ OK ] Started Set the CPU Frequency Scaling governor.
[ 51.988105] cloud-init[1936]: # cloud-init at #
[ OK ] Started D-Bus System Message Bus.
[ 52.024108] cloud-init[1936]: # https://bugs.launchpad.net/cloud-init/+filebug?field.tags=dsid #
[ OK ] Started Login Service.
[ 52.064055] cloud-init[1936]: # Make sure to include the cloud provider your instance is #
[ OK ] Reached target Cloud-config availability.
[ 52.096108] cloud-init[1936]: # running on. #
Starting Apply the settings specified in cloud-config...
[ 52.132211] cloud-init[1936]: # #
[ OK ] Started System Logging Service.
[ 52.168109] cloud-init[1936]: # For more information see #
[ OK ] Started Dispatcher daemon for systemd-networkd.
[ 52.204108] cloud-init[1936]: # https://bugs.launchpad.net/bugs/1660385 #
[ 52.240061] [ OK cloud-init] [1936]: Started Resets System Activity Data Collector.# #
[ OK ] Started OpenBSD Secure Shell server.
[ 52.264078] cloud-init[1936]: # After you have filed a bug, you can disable this warning by #
[[ 52.304062] OK cloud-init] [1936]: Started iSCSI initiator daemon (iscsid).# launching your instance with the cloud-config below, or #
[[ 52.328064] OK cloud-init] [1936]: # putting that content into #
Reached target Remote File Systems (Pre).
[ 52.328174] cloud-init[1936]: # /etc/cloud/cloud.cfg.d/99-ec2-datasource.cfg #
[ OK ] Reached target Remote File Systems.
[ 52.372060] cloud-init[1936]: # #
Starting Permit User Sessions...
[ 52.412110] cloud-init[1936]: # #cloud-config #
[ OK ] Started LSB: Record successful boot for GRUB.
[ 52.444105] cloud-init[1936]: # datasource: #
[ OK ] Started Permit User Sessions.
[ 52.480122] cloud-init[1936]: # Ec2: #
[ 52.520062] cloud-init[1936]: # strict_id: false #
Starting Set console scheme...
[ 52.520178] cloud-init[1936]: **************************************************************************
[ OK ] Started Serial Getty on ttyS1.
[ 52.568097] cloud-init[1936]: Generating public/private rsa key pair.
[ OK ] Started Set console scheme.
[ 52.592165] cloud-init[1936]: Your identification has been saved in /etc/ssh/ssh_host_rsa_key.
[ OK ] Created slice system-getty.slice.
[ 52.628140] cloud-init[1936]: Your public key has been saved in /etc/ssh/ssh_host_rsa_key.pub.
[ OK ] Started Getty on tty1.
[ 52.664141] cloud-init[1936]: The key fingerprint is:
[ OK ] Reached target Login Prompts.
[[ 52.692180] OK cloud-init] [1936]: Reached target Multi-User System.SHA256:hWEHC+CFdAzKgyxRZsKvghS6Bst7nu0Z6us389ubFbc root@myserver
Starting Tell the API that this device is active....
[ 52.732152] cloud-init[1936]: The key's randomart image is:
[ OK ] Reached target Graphical Interface.
[ 52.748277] cloud-init[1936]: +---[RSA 2048]----+
Starting Update UTMP about System Runlevel Changes...
[ 52.788204] cloud-init[1936]: |+.+.+=+ +.. |
[ OK ] Started Update UTMP about System Runlevel Changes.
[ 52.820249] cloud-init[1936]: |.X o.o.o = |
[ 52.856136] cloud-init[1936]: |+.* . o . |
[ 52.876124] cloud-init[1936]: |+. o . |
[ 52.892117] cloud-init[1936]: |=o. S . . |
[ 52.912106] cloud-init[1936]: |=+ o . |
[ 52.932171] cloud-init[1936]: |o . . . E |
[ 52.948060] cloud-init[1936]: | . .++o . o |
[ 52.964121] cloud-init[1936]: | =B+++o.+. |
[ 52.984121] cloud-init[1936]: +----[SHA256]-----+
[ 53.004114] cloud-init[1936]: Generating public/private dsa key pair.
[ 53.020122] cloud-init[1936]: Your identification has been saved in /etc/ssh/ssh_host_dsa_key.
[ 53.040117] cloud-init[1936]: Your public key has been saved in /etc/ssh/ssh_host_dsa_key.pub.
[ 53.064129] cloud-init[1936]: The key fingerprint is:
[ 53.084112] cloud-init[1936]: SHA256:b5SWdgodgOqMzUd6yZKf0JcKssVPsEjG9udxNuLjJ4A root@myserver
[ 53.108124] cloud-init[1936]: The key's randomart image is:
[ 53.128052] cloud-init[1936]: +---[DSA 1024]----+
[ 53.144106] cloud-init[1936]: | .. |
[ 53.160095] cloud-init[1936]: | . . |
[ 53.176061] cloud-init[1936]: | . . . |
[ 53.192070] Stopping OpenBSD Secure Shell server...
cloud-init[1936]: | = o . . + |
[ OK ] Stopped OpenBSD Secure Shell server.
[ 53.212104] cloud-init[1936]: | + @ O .S.B . |
Starting OpenBSD Secure Shell server...
[ 53.244115] cloud-init[1936]: | E ^ @ ** o |
[[ 53.276059] OK cloud-init] [1936]: Started OpenBSD Secure Shell server.| + # O .+ |
[ 53.296087] cloud-init[1936]: | . X .. |
[ 53.312059] cloud-init[1936]: | ..+ |
[ 53.328504] cloud-init[1936]: +----[SHA256]-----+
[ 53.344056] cloud-init[1936]: Generating public/private ecdsa key pair.
[ 53.360054] cloud-init[1936]: Your identification has been saved in /etc/ssh/ssh_host_ecdsa_key.
[ 53.380052] cloud-init[1936]: Your public key has been saved in /etc/ssh/ssh_host_ecdsa_key.pub.
[ OK ] Started Apply the settings specified in cloud-config.
[ 53.400110] cloud-init[1936]: The key fingerprint is:
Starting Execute cloud user/final scripts...
[ 53.432114] cloud-init[1936]: SHA256:Obz8Fz/rTOSraepThpIbJtRVNFTYSuKIm33jBmL27vQ root@myserver
[ 53.468058] cloud-init[1936]: The key's randomart image is:
[ 53.484055] cloud-init[1936]: +---[ECDSA 256]---+
[ 53.500052] cloud-init[1936]: | +=+. |
[ 53.516051] cloud-init[1936]: | o o.. |
[ 53.532053] cloud-init[1936]: | o + o . |
[ 53.548066] cloud-init[1936]: | o.o.. . |
[ 53.564051] cloud-init[1936]: | . +S. . . |
[ 53.580054] cloud-init[1936]: | B.Bo+ +o |
[ 53.596056] cloud-init[1936]: | o =+B + oo |
[ 53.612053] cloud-init[1936]: | .oo+ o+o. |
[ 53.632054] cloud-init[1936]: | oooE=oo=o |
[ 53.648052] cloud-init[1936]: +----[SHA256]-----+
[ 53.666530] cloud-init[2014]: Generating locales (this might take a while)...
[ 53.684061] cloud-init[2014]: en_US.UTF-8... done
[ 53.700051] cloud-init[2014]: Generation complete.
[ 53.716048] cloud-init[2014]: Cloud-init v. 18.2 running 'modules:config' at Mon, 01 Oct 2018 21:21:22 +0000. Up 52.42 seconds.
<14>Oct 1 21:21:26 ec2:
<14>Oct 1 21:21:26 ec2: #############################################################
<14>Oct 1 21:21:26 ec2: -----BEGIN SSH HOST KEY FINGERPRINTS-----
<14>Oct 1 21:21:26 ec2: 1024 SHA256:b5SWdgodgOqMzUd6yZKf0JcKssVPsEjG9udxNuLjJ4A root@myserver (DSA)
<14>Oct 1 21:21:26 ec2: 256 SHA256:Obz8Fz/rTOSraepThpIbJtRVNFTYSuKIm33jBmL27vQ root@myserver (ECDSA)
<14>Oct 1 21:21:26 ec2: 2048 SHA256:hWEHC+CFdAzKgyxRZsKvghS6Bst7nu0Z6us389ubFbc root@myserver (RSA)
<14>Oct 1 21:21:26 ec2: -----END SSH HOST KEY FINGERPRINTS-----
<14>Oct 1 21:21:26 ec2: #############################################################
-----BEGIN SSH HOST KEY KEYS-----
ecdsa-sha2-nistp256 AAAAE2VjZHNhLXNoYTItbmlzdHAyNTYAAAAIbmlzdHAyNTYAAABBBC5tfo3uPvYs1ZRNGhSojTZJFdaOuB0LdThiHdkIF+aH5oaY4qCokj9l/sDYGif538r1hd/JVQSr1q/bFxSQd5Q= root@myserver
ssh-rsa AAAAB3NzaC1yc2EAAAADAQABAAABAQCouKHSuFfmseNqBUONf/e00PedAbwHbR9JZJJFM0feJJNsF/TpZ7XAIvi1r1YqRtlVVjxC4p/boAnyZ3QHkBa6MV6ZCvHXthaZuVexrk9gLfPefixmbcUdlKtvq9RTaz4ngugrOP94d4uIFR5ma47nvSUjsSnfjd2iuxx4CCRVnKOh4EkB4S8AmT5iygBKb7mnSAy/qjiy1xm1udFqSvENFMXMs112ShpHnzjxn4/Od8Gjh7Rdif0PPOZbrDuQuyVj9aQhcIt7NZ6cZFJnXbJN0FBrScE/oTzhYgn7FVZLEjUmQam1uj0vLbF7MvY3xBiyK1ZUSQoWzbs9nkaKOwXX root@myserver
-----END SSH HOST KEY KEYS-----
[ OK ] Started phone-home.service.
[ 56.301617] cloud-init[2073]: Cloud-init v. 18.2 running 'modules:final' at Mon, 01 Oct 2018 21:21:24 +0000. Up 53.74 seconds.
[ 56.328159] cloud-init[2073]: Cloud-init v. 18.2 finished at Mon, 01 Oct 2018 21:21:26 +0000. Datasource DataSourceEc2. Up 56.29 seconds
[ OK ] Started Execute cloud user/final scripts.
[ OK ] Reached target Cloud-init target.
Ubuntu 18.04 LTS myserver ttyS1
Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment