a collection of my notes while working on nanopore basecalling on the Jetson Xavier

basecalling_notes.md

Jetson Xavier basecalling notes

initial basecalling runs

'fast' flip-flop calling on the Jetson Xavier

guppy_basecaller --disable_pings --compress_fastq -c dna_r9.4.1_450bps_fast.cfg -i flongle_fast5_pass/ -s flongle_test2 -x 'auto' --recursive 

high-accuracy calling with base modifications on the Jetson Xavier

guppy_basecaller --disable_pings --compress_fastq -c dna_r9.4.1_450bps_modbases_dam-dcm-cpg_hac.cfg --fast5_out -i flongle_fast5_pass/ -s flongle_hac_fastq -x 'auto' --recursive 

$ guppy_basecaller --compress_fastq -c dna_r9.4.1_450bps_modbases_dam-dcm-cpg_hac.cfg -i flongle_fast5_pass/ -s flongle_hac_fastq -x 'auto' --recursive
ONT Guppy basecalling software version 3.4.1+213a60d0
config file:        /opt/ont/guppy/data/dna_r9.4.1_450bps_modbases_dam-dcm-cpg_hac.cfg
model file:         /opt/ont/guppy/data/template_r9.4.1_450bps_modbases_dam-dcm-cpg_hac.jsn
input path:         flongle_fast5_pass/
save path:          flongle_hac_fastq
chunk size:         1000
chunks per runner:  512
records per file:   4000
fastq compression:  ON
num basecallers:    1
gpu device:         auto
kernel path:
runners per device: 4

Found 105 fast5 files to process.
Init time: 2790 ms

0%   10   20   30   40   50   60   70   80   90   100%
|----|----|----|----|----|----|----|----|----|----|
***************************************************
Caller time: 2493578 ms, Samples called: 3970728746, samples/s: 1.59238e+06
Finishing up any open output files.
Basecalling completed successfully.

So from the above we see in high accuracy mode it take the Xavier ~41 minutes to complete the base calling using the default configuration files. For reference the fast calling mode was ~8 minutes.

optimising settings for Jetson Xavier

• When performing GPU basecalling there is always one CPU support thread per GPU caller, so the number of callers (--num_callers) dictates the maximum number of CPU threads used.
• Max chunks per runner (--chunks_per_runner): The maximum number of chunks which can be submitted to a single neural network runner before it starts computation. Increasing this figure will increase GPU basecalling performance when it is enabled.
• Number of GPU runners per device (--gpu_runners_per_device): The number of neural network runners to create per CUDA device. Increasing this number may improve performance on GPUs with a large number of compute cores, but will increase GPU memory use. This option only affects GPU calling.

There is a rough equation to estimate amount of ram:

runners * chunks_per_runner * chunk_size < 100000 * [max GPU memory in GB]

For example, a GPU with 8 GB of memory would require:

runners * chunks_per_runner * chunk_size < 800000

some suggested settings from ONT

NVIDIA Jetson TX2

--num_callers 1
--gpu_runners_per_device 2
--chunks_per_runner 48

from hac config file (dna_r9.4.1_450bps_modbases_dam-dcm-cpg_hac.cfg)

chunk_size                          = 1000
gpu_runners_per_device              = 4
chunks_per_runner                   = 512
chunks_per_caller                   = 10000

modified testing

'fast' flip-flop calling on the Jetson Xavier

guppy_basecaller --disable_pings --compress_fastq -c dna_r9.4.1_450bps_fast.cfg -i flongle_fast5_pass/ \
  -s flongle_test2 -x 'auto' --recursive --num_callers 4 --gpu_runners_per_device 8 --chunks_per_runner 256

$ guppy_basecaller --disable_pings --compress_fastq -c dna_r9.4.1_450bps_fast.cfg \
-i flongle_fast5_pass/ -s flongle_test2 -x 'auto' --recursive --num_callers 4 \
--gpu_runners_per_device 8 --chunks_per_runner 256
ONT Guppy basecalling software version 3.4.1+213a60d0
config file:        /opt/ont/guppy/data/dna_r9.4.1_450bps_fast.cfg
model file:         /opt/ont/guppy/data/template_r9.4.1_450bps_fast.jsn
input path:         flongle_fast5_pass/
save path:          flongle_test2
chunk size:         1000
chunks per runner:  256
records per file:   4000
fastq compression:  ON
num basecallers:    4
gpu device:         auto
kernel path:
runners per device: 8

Found 105 fast5 files to process.
Init time: 880 ms

0%   10   20   30   40   50   60   70   80   90   100%
|----|----|----|----|----|----|----|----|----|----|
***************************************************
Caller time: 428745 ms, Samples called: 3970269916, samples/s: 9.26021e+06
Finishing up any open output files.
Basecalling completed successfully.

I was able to shave a minute off the fast model on the Xavier (above) getting it down to ~7 minutes.

Update: (13th Dec 2019)

Just modifying the number of chunks per runner has allowed me to get the time down to under 6.5 mins (see table below).

chunks_per_runner	time
(160) default	~8 mins
256	7 mins 6 secs
512	6 mins 28 secs
1024	6 min 23 secs

It looks like we might have reached an optimal point here. Next I'll test some of the other parameters and see if we can speed this up further.

high-accuracy calling with base modifications on the Jetson Xavier

guppy_basecaller --disable_pings --compress_fastq -c dna_r9.4.1_450bps_modbases_dam-dcm-cpg_hac.cfg \
  --num_callers 4 --gpu_runners_per_device 8 --fast5_out -i flongle_fast5_pass/ \
  -s flongle_hac_basemod_fastq -x 'auto' --recursive

increased number of callers

$ guppy_basecaller --disable_pings --compress_fastq -c dna_r9.4.1_450bps_fast.cfg \
  -i flongle_fast5_pass/ -s flongle_test2 -x 'auto' --recursive --num_callers 8 \
  --gpu_runners_per_device 8 --chunks_per_runner 1024
ONT Guppy basecalling software version 3.4.1+213a60d0
config file:        /opt/ont/guppy/data/dna_r9.4.1_450bps_fast.cfg
model file:         /opt/ont/guppy/data/template_r9.4.1_450bps_fast.jsn
input path:         flongle_fast5_pass/
save path:          flongle_test2
chunk size:         1000
chunks per runner:  1024
records per file:   4000
fastq compression:  ON
num basecallers:    8 
gpu device:         auto
kernel path:
runners per device: 8 

Found 105 fast5 files to process.
Init time: 897 ms

0%   10   20   30   40   50   60   70   80   90   100%
|----|----|----|----|----|----|----|----|----|----|
***************************************************
Caller time: 383865 ms, Samples called: 3970269916, samples/s: 1.03429e+07
Finishing up any open output files.
Basecalling completed successfully.

increased chunk size

$ guppy_basecaller --disable_pings --compress_fastq -c dna_r9.4.1_450bps_fast.cfg \
  -i flongle_fast5_pass/ -s flongle_test2 -x 'auto' --recursive --num_callers 4 \
  --gpu_runners_per_device 8 --chunks_per_runner 1024 --chunk_size 2000
ONT Guppy basecalling software version 3.4.1+213a60d0
config file:        /opt/ont/guppy/data/dna_r9.4.1_450bps_fast.cfg
model file:         /opt/ont/guppy/data/template_r9.4.1_450bps_fast.jsn
input path:         flongle_fast5_pass/
save path:          flongle_test2
chunk size:         2000
chunks per runner:  1024
records per file:   4000
fastq compression:  ON
num basecallers:    4
gpu device:         auto
kernel path:
runners per device: 8

Found 105 fast5 files to process.
Init time: 1180 ms

0%   10   20   30   40   50   60   70   80   90   100%
|----|----|----|----|----|----|----|----|----|----|
***************************************************
Caller time: 503532 ms, Samples called: 3970269916, samples/s: 7.88484e+06
Finishing up any open output files.
Basecalling completed successfully.

increased runners per device and number of callers

$ guppy_basecaller --disable_pings --compress_fastq -c dna_r9.4.1_450bps_fast.cfg \
  -i flongle_fast5_pass/ -s flongle_test2 -x 'auto' --recursive --num_callers 8 \
  --gpu_runners_per_device 16 --chunks_per_runner 1024 --chunk_size 1000
ONT Guppy basecalling software version 3.4.1+213a60d0
config file:        /opt/ont/guppy/data/dna_r9.4.1_450bps_fast.cfg
model file:         /opt/ont/guppy/data/template_r9.4.1_450bps_fast.jsn
input path:         flongle_fast5_pass/
save path:          flongle_test2
chunk size:         1000
chunks per runner:  1024
records per file:   4000
fastq compression:  ON
num basecallers:    8
gpu device:         auto
kernel path:
runners per device: 16

Found 105 fast5 files to process.
Init time: 1113 ms

0%   10   20   30   40   50   60   70   80   90   100%
|----|----|----|----|----|----|----|----|----|----|
***************************************************
Caller time: 383466 ms, Samples called: 3970269916, samples/s: 1.03536e+07
Finishing up any open output files.
Basecalling completed successfully.

current 'optimal' parameters

The below parameters seem to provide the 'optimal' speed increase with a resultant run time of 6 mins and 23 secs.

$ guppy_basecaller --disable_pings --compress_fastq -c dna_r9.4.1_450bps_fast.cfg \
  -i flongle_fast5_pass/ -s flongle_test2 -x 'auto' --recursive --num_callers 4 \
  --gpu_runners_per_device 8 --chunks_per_runner 1024 --chunk_size 1000
ONT Guppy basecalling software version 3.4.1+213a60d0
config file:        /opt/ont/guppy/data/dna_r9.4.1_450bps_fast.cfg
model file:         /opt/ont/guppy/data/template_r9.4.1_450bps_fast.jsn
input path:         flongle_fast5_pass/
save path:          flongle_test2
chunk size:         1000
chunks per runner:  1024
records per file:   4000
fastq compression:  ON
num basecallers:    4
gpu device:         auto
kernel path:
runners per device: 8

Found 105 fast5 files to process.
Init time: 926 ms

0%   10   20   30   40   50   60   70   80   90   100%
|----|----|----|----|----|----|----|----|----|----|
***************************************************
Caller time: 382714 ms, Samples called: 3970269916, samples/s: 1.0374e+07
Finishing up any open output files.
Basecalling completed successfully.

---

exploring portable batteries and power modes

We are currently using a 27000mAh AC Portable Charger from Ravpower.

Below: Ravpower Xtreme Series 27000mAh AC Portable Charger This battery bank/charger has a built in 220V AC outlet and 1 usb-c and 2 usb 3.1 outputs.

Below: powerbank charging from the wall. Ravpower claim this powerbank will charge a smartphone 11 times, a tablet 4 times or a laptop 3 times.

Below: running our first portable Xavier GPU basecalling of nanopore data!

changing power modes

Running the Xavier in different power states obviously influences the amount of run time on the battery.

Power mode	Time
10W	33.4 mins
15W	14.3 mins
30W 2 cores	10.8 mins
30W 4 cores	10.8 mins
30W MAX (8 cores)	7.5 mins

The above benchmarks were performed on data generated from a flongle run (~0.5 Mb of sequence or 5.5 Gb of actual data).

---

potential V100 examples

V100 config example for high accuracy model

guppy_basecaller \
--disable_pings \
--compress_fastq \
-c dna_r9.4.1_450bps_modbases_dam-dcm-cpg_hac.cfg \
--ipc_threads 16 \
--num_callers 8 \
--gpu_runners_per_device 4 \
--chunks_per_runner 512 \
--device "cuda:0 cuda:1" \ # this parameter should now scale nicely across both cards, I haven't checked though
--recursive \
--fast5_out \
-i fast5_input \
-s fastq_output

V100 config example for fast calling model

guppy_basecaller \
--disable_pings \
--compress_fastq \
-c dna_r9.4.1_450bps_fast.cfg \
--ipc_threads 16 \
--num_callers 8 \
--gpu_runners_per_device 64 \
--chunks_per_runner 256 \
--device "cuda:0 cuda:1" \
--recursive \
-i fast5_input \
-s fastq_output

---

Guppy basecalling benchmarking on a Titan RTX

There has been some discussion about the recent release of Guppy (3.4.1 and 3.4.2) in terms of speed. I was interested in running some benchmarks across different versions. I had a hunch it may have been something to do with the newly introduced compression of the fast5 files...

Test parameters

The only things I am changing are the version of Guppy being used, and in the case of 3.4.3 I am trying with and without vbz compression of the fast5 files. Everything else is as below:

System:

• Debian Sid (unstable)
• 2x 12-Core Intel Xeon Gold 5118 (48 threads)
• 256Gb RAM
• Titan RTX
• Nvidia drivers: 418.56
• CUDA Version: 10.1

Guppy GPU basecalling parameters:

• --disable_pings
• --compress_fastq
• --dna_r9.4.1_450bps_fast.cfg
• --num_callers 8
• --gpu_runners_per_device 64
• --chunks_per_runner 256
• --device "cuda:0"
• --recursive

For each Guppy version I ran the basecaller three times in an attempt to ensure that results were consistent^*.

Note: I chose the fast basecalling model as I wanted to do a quick set of benchmarks. If I feel up to it I may do the same thing for the high accuracy caller...

^* Spoiler, I didn't originally do this and it proved misleading...

Results

guppy version	time (seconds)	samples/s
3.1.5#	93.278	4.25638e+07
3.2.4#	94.141	4.21737e+07
3.3.0#	94.953	4.1813e+07
3.3.3#	95.802	4.14425e+07
3.4.1 (no vbz compressed fast5)	79.913	4.96824e+07
3.4.1 (vbz compressed fast5)	90.895	4.36797e+07
3.4.3 (no vbz compressed fast5)	90.674	4.37862e+07
3.4.3 (vbz compressed fast5)	82.877	4.79056e+07

^# these versions of Guppy did not support vbz compression of fast5 files (pre 3.4.X from memory).

Summary to date

I initially thought that there was something off with the compression imlementation in 3,4,3 as my first run on uncompressed data was ~3x slower than the run on the compressed data. When I grabbed 3.4.1 to perform the same check I noticed that it was fairly consistent between compressed and not. So I went back and was more rigorous and performed 3 iterations of each run for each version, ditto for versions 3.4.X compressed and not. This proved that the initial run was an anomaly and should be disregarded.

What was quite interesting is that running on vbz compressed fast5 data appears to be in the range of 8-10 seconds faster than uncompressed. So there is a slight added speed benefit on top of the nice reduction in file size - which is a little nicer for the SSD/HDD.

So at this stage I can't confirm any detrimental speed issues when using Guppy version 3.4.X, but this needs to be caveated with all the usual disclaimers:

• all systems are different (I'm not on Ubuntu for instance).
• drivers are different (I need to update).
• GPUs are very different, i.e. many people (including me) are using 'non-supported' GPUs - in my case a Titan RTX which is no slouch.
  • For what it's worth, I can add a comment here saying that I haven't had any speed issues with basecalling on our Nvidia Jetson Xaviers using Guppy 3.4.1.
• our 'little' Linux server isn't exactly a slouch either - so laptop/desktop builds could be very different.
• I ran the fast basecaller (I'm currently flat out and can't wait for the high accuracy caller) - I may take a subset of data and revist with hac at some stage.

You can view the 'raw' results/output for each run below:

Guppy 3.1.5

~/Downloads/software/guppy/3.1.5/ont-guppy/bin/guppy_basecaller \
    --disable_pings \
    --compress_fastq \
    -c dna_r9.4.1_450bps_fast.cfg \
    --num_callers 8 \
    --gpu_runners_per_device 64 \
    --chunks_per_runner 256 \
    --device "cuda:0" \
    --recursive \
    -i flongle_fast5_pass \
    -s testrun_fast_3.1.5

ONT Guppy basecalling software version 3.1.5+781ed57
config file:        /home/miles/Downloads/software/guppy/3.1.5/ont-guppy/data/dna_r9.4.1_450bps_fast.cfg
model file:         /home/miles/Downloads/software/guppy/3.1.5/ont-guppy/data/template_r9.4.1_450bps_fast.jsn
input path:         flongle_fast5_pass
save path:          testrun_fast_3.1.5
chunk size:         1000
chunks per runner:  256
records per file:   4000
fastq compression:  ON
num basecallers:    8
gpu device:         cuda:0
kernel path:        
runners per device: 64

Found 105 fast5 files to process.
Init time: 1000 ms

0%   10   20   30   40   50   60   70   80   90   100%
|----|----|----|----|----|----|----|----|----|----|
***************************************************
Caller time: 93278 ms, Samples called: 3970269916, samples/s: 4.25638e+07
Finishing up any open output files.
Basecalling completed successfully.

Guppy 3.2.4

~/Downloads/software/guppy/3.2.4/ont-guppy/bin/guppy_basecaller \
    --disable_pings \
    --compress_fastq \
    -c dna_r9.4.1_450bps_fast.cfg \
    --num_callers 8 \
    --gpu_runners_per_device 64 \
    --chunks_per_runner 256 \
    --device "cuda:0" \
    --recursive \
    -i flongle_fast5_pass \
    -s testrun_fast_3.2.4

ONT Guppy basecalling software version 3.2.4+d9ed22f
config file:        /home/miles/Downloads/software/guppy/3.2.4/ont-guppy/data/dna_r9.4.1_450bps_fast.cfg
model file:         /home/miles/Downloads/software/guppy/3.2.4/ont-guppy/data/template_r9.4.1_450bps_fast.jsn
input path:         flongle_fast5_pass
save path:          testrun_fast_3.2.4
chunk size:         1000
chunks per runner:  256
records per file:   4000
fastq compression:  ON
num basecallers:    8
gpu device:         cuda:0
kernel path:        
runners per device: 64

Found 105 fast5 files to process.
Init time: 836 ms

0%   10   20   30   40   50   60   70   80   90   100%
|----|----|----|----|----|----|----|----|----|----|
***************************************************
Caller time: 94141 ms, Samples called: 3970269916, samples/s: 4.21737e+07
Finishing up any open output files.
Basecalling completed successfully.

Guppy 3.3.0

~/Downloads/software/guppy/3.3.0/ont-guppy/bin/guppy_basecaller \
    --disable_pings \
    --compress_fastq \
    -c dna_r9.4.1_450bps_fast.cfg \
    --num_callers 8 \
    --gpu_runners_per_device 64 \
    --chunks_per_runner 256 \
    --device "cuda:0" \
    --recursive \
    -i flongle_fast5_pass \
    -s testrun_fast_3.3.0

ONT Guppy basecalling software version 3.3.0+ef22818
config file:        /home/miles/Downloads/software/guppy/3.3.0/ont-guppy/data/dna_r9.4.1_450bps_fast.cfg
model file:         /home/miles/Downloads/software/guppy/3.3.0/ont-guppy/data/template_r9.4.1_450bps_fast.jsn
input path:         flongle_fast5_pass
save path:          testrun_fast_3.3.0
chunk size:         1000
chunks per runner:  256
records per file:   4000
fastq compression:  ON
num basecallers:    8
gpu device:         cuda:0
kernel path:        
runners per device: 64

Found 105 fast5 files to process.
Init time: 722 ms

0%   10   20   30   40   50   60   70   80   90   100%
|----|----|----|----|----|----|----|----|----|----|
***************************************************
Caller time: 94953 ms, Samples called: 3970269916, samples/s: 4.1813e+07
Finishing up any open output files.
Basecalling completed successfully.

Guppy 3.3.3

~/Downloads/software/guppy/3.3.3/ont-guppy/bin/guppy_basecaller \
    --disable_pings \
    --compress_fastq \
    -c dna_r9.4.1_450bps_fast.cfg \
    --num_callers 8 \
    --gpu_runners_per_device 64 \
    --chunks_per_runner 256 \
    --device "cuda:0" \
    --recursive \
    -i flongle_fast5_pass \
    -s testrun_fast_3.3.3

ONT Guppy basecalling software version 3.3.3+fa743a6
config file:        /home/miles/Downloads/software/guppy/3.3.3/ont-guppy/data/dna_r9.4.1_450bps_fast.cfg
model file:         /home/miles/Downloads/software/guppy/3.3.3/ont-guppy/data/template_r9.4.1_450bps_fast.jsn
input path:         flongle_fast5_pass
save path:          testrun_fast_3.3.3
chunk size:         1000
chunks per runner:  256
records per file:   4000
fastq compression:  ON
num basecallers:    8
gpu device:         cuda:0
kernel path:        
runners per device: 64

Found 105 fast5 files to process.
Init time: 726 ms

0%   10   20   30   40   50   60   70   80   90   100%
|----|----|----|----|----|----|----|----|----|----|
***************************************************
Caller time: 95802 ms, Samples called: 3970269916, samples/s: 4.14425e+07
Finishing up any open output files.
Basecalling completed successfully.

Guppy 3.4.1 (not compressed)

~/Downloads/software/guppy/3.4.1/ont-guppy/bin/guppy_basecaller \
    --disable_pings \
    --compress_fastq \
    -c dna_r9.4.1_450bps_fast.cfg \
    --num_callers 8 \
    --gpu_runners_per_device 64 \
    --chunks_per_runner 256 \
    --device "cuda:0" \
    --recursive \
    -i flongle_fast5_pass \
    -s testrun_fast_3.4.1

ONT Guppy basecalling software version 3.4.1+ad4f8b9
config file:        /home/miles/Downloads/software/guppy/3.4.1/ont-guppy/data/dna_r9.4.1_450bps_fast.cfg
model file:         /home/miles/Downloads/software/guppy/3.4.1/ont-guppy/data/template_r9.4.1_450bps_fast.jsn
input path:         flongle_fast5_pass
save path:          testrun_fast_3.4.1
chunk size:         1000
chunks per runner:  256CUDA Version: 10.1
fastq compression:  ON
num basecallers:    8
gpu device:         cuda:0
kernel path:        
runners per device: 64

Found 105 fast5 files to process.
Init time: 728 ms

0%   10   20   30   40   50   60   70   80   90   100%
|----|----|----|----|----|----|----|----|----|----|
***************************************************
Caller time: 90895 ms, Samples called: 3970269916, samples/s: 4.36797e+07
Finishing up any open output files.
Basecalling completed successfully.

Guppy 3.4.1 (compressed)

~/Downloads/software/guppy/3.4.1/ont-guppy/bin/guppy_basecaller \
    --disable_pings \
    --compress_fastq \
    -c dna_r9.4.1_450bps_fast.cfg \
    --num_callers 8 \
    --gpu_runners_per_device 64 \
    --chunks_per_runner 256 \
    --device "cuda:0" \
    --recursive \
    -i flongle_compressed \
    -s testrun_fast_3.4.1

ONT Guppy basecalling software version 3.4.1+ad4f8b9
config file:        /home/miles/Downloads/software/guppy/3.4.1/ont-guppy/data/dna_r9.4.1_450bps_fast.cfg
model file:         /home/miles/Downloads/software/guppy/3.4.1/ont-guppy/data/template_r9.4.1_450bps_fast.jsn
input path:         flongle_compressed
save path:          testrun_fast_3.4.1
chunk size:         1000
chunks per runner:  256
records per file:   4000
fastq compression:  ON
num basecallers:    8
gpu device:         cuda:0
kernel path:        
runners per device: 64

Found 105 fast5 files to process.
Init time: 725 ms

0%   10   20   30   40   50   60   70   80   90   100%
|----|----|----|----|----|----|----|----|----|----|
***************************************************
Caller time: 79913 ms, Samples called: 3970269916, samples/s: 4.96824e+07
Finishing up any open output files.
Basecalling completed successfully.

Guppy 3.4.3 (not compressed)

~/Downloads/software/guppy/3.4.3/ont-guppy/bin/guppy_basecaller \
    --disable_pings \
    --compress_fastq \
    -c dna_r9.4.1_450bps_fast.cfg \
    --num_callers 8 \
    --gpu_runners_per_device 64 \
    --chunks_per_runner 256 \
    --device "cuda:0" \
    --recursive \
    -i flongle_fast5_pass \
    -s testrun_fast_3.4.3_uncompressed

first run (it looks like this is anomaly)

ONT Guppy basecalling software version 3.4.3+f4fc735
config file:        /home/miles/Downloads/software/guppy/3.4.3/ont-guppy/data/dna_r9.4.1_450bps_fast.cfg
model file:         /home/miles/Downloads/software/guppy/3.4.3/ont-guppy/data/template_r9.4.1_450bps_fast.jsn
input path:         flongle_fast5_pass
save path:          testrun_fast_3.4.3_uncompressed
chunk size:         1000
chunks per runner:  256
records per file:   4000
fastq compression:  ON
num basecallers:    8
gpu device:         cuda:0
kernel path:
runners per device: 64

Found 105 fast5 files to process.
Init time: 738 ms

0%   10   20   30   40   50   60   70   80   90   100%
|----|----|----|----|----|----|----|----|----|----|
***************************************************
Caller time: 270953 ms, Samples called: 3970269916, samples/s: 1.4653e+07
Finishing up any open output files.
Basecalling completed successfully.

second run

ONT Guppy basecalling software version 3.4.3+f4fc735
config file:        /home/miles/Downloads/software/guppy/3.4.3/ont-guppy/data/dna_r9.4.1_450bps_fast.cfg
model file:         /home/miles/Downloads/software/guppy/3.4.3/ont-guppy/data/template_r9.4.1_450bps_fast.jsn
input path:         flongle_fast5_pass
save path:          testrun_fast_3.4.3_uncompressed
chunk size:         1000
chunks per runner:  256
records per file:   4000
fastq compression:  ON
num basecallers:    8
gpu device:         cuda:0
kernel path:        
runners per device: 64

Found 105 fast5 files to process.
Init time: 705 ms

0%   10   20   30   40   50   60   70   80   90   100%
|----|----|----|----|----|----|----|----|----|----|
***************************************************
Caller time: 90674 ms, Samples called: 3970269916, samples/s: 4.37862e+07
Finishing up any open output files.
Basecalling completed successfully.

third run

ONT Guppy basecalling software version 3.4.3+f4fc735 config file: /home/miles/Downloads/software/guppy/3.4.3/ont-guppy/data/dna_r9.4.1_450bps_fast.cfg model file: /home/miles/Downloads/software/guppy/3.4.3/ont-guppy/data/template_r9.4.1_450bps_fast.jsn input path: flongle_fast5_pass save path: testrun_fast_3.4.3_uncompressed3 chunk size: 1000 chunks per runner: 256 records per file: 4000 fastq compression: ON num basecallers: 8 gpu device: cuda:0 kernel path:
runners per device: 64

Found 105 fast5 files to process. Init time: 719 ms

0% 10 20 30 40 50 60 70 80 90 100% |----|----|----|----|----|----|----|----|----|----|

---

Caller time: 94516 ms, Samples called: 3970269916, samples/s: 4.20063e+07 Finishing up any open output files. Basecalling completed successfully.

Guppy 3.4.3 (compressed)

~/Downloads/software/guppy/3.4.3/ont-guppy/bin/guppy_basecaller \
    --disable_pings \
    --compress_fastq \
    -c dna_r9.4.1_450bps_fast.cfg \
    --num_callers 8 \
    --gpu_runners_per_device 64 \
    --chunks_per_runner 256 \
    --device "cuda:0" \
    --recursive \
    -i flongle_compressed \
    -s testrun_fast_3.4.3

ONT Guppy basecalling software version 3.4.3+f4fc735
config file:        /home/miles/Downloads/software/guppy/3.4.3/ont-guppy/data/dna_r9.4.1_450bps_fast.cfg
model file:         /home/miles/Downloads/software/guppy/3.4.3/ont-guppy/data/template_r9.4.1_450bps_fast.jsn
input path:         flongle_compressed
save path:          testrun_fast_3.4.3
chunk size:         1000
chunks per runner:  256
records per file:   4000
fastq compression:  ON
num basecallers:    8
gpu device:         cuda:0
kernel path:        
runners per device: 64

Found 105 fast5 files to process.
Init time: 721 ms

0%   10   20   30   40   50   60   70   80   90   100%
|----|----|----|----|----|----|----|----|----|----|
***************************************************
Caller time: 82877 ms, Samples called: 3970269916, samples/s: 4.79056e+07
Finishing up any open output files.
Basecalling completed successfully.

It's great to hear you've almost completed the transition. Following your past instructions and hard work, I've had great success running the MinION with fast basecalling for all the 16S analyses I do. Unfortunately, last week something strange happened (MinKNOW GUI no longer shows the different kits), so I've been forced to use my M1 MacBook... and the time differences are tremendous.

It’s most likely the grpc certs expired 1/14/2023. It can be updated without updating minknow. I’ll send a forum link later today. Or you can look it up in the community forums.

…

-Tom

On Jan 26, 2023, at 7:20 AM, pablosoup1 ***@***.***> wrote: ***@***.*** commented on this gist. It's great to hear you've almost completed the transition. Following your past instructions and hard work, I've had great success running the MinION with fast basecalling for all the 16S analyses I do. Unfortunately, last week something strange happened (MinKNOW GUI no longer shows the different kits), so I've been forced to use my M1 MacBook... and the time differences are tremendous. — Reply to this email directly, view it on GitHub or unsubscribe. You are receiving this email because you commented on the thread. Triage notifications on the go with GitHub Mobile for iOS or Android.

Thanks so much for pointing me in the right direction! Here's ONT's official response/fix:

https://community.nanoporetech.com/posts/certificate-expiry-for-min

And the first image they show is exactly what I saw in the GUI, with no real error codes showing up.

That is a different post than I first saw. Thanks. It shows the same procedure for updating the certs from the .deb package, and that did work for me. Just FYI, due to the skyrocketed cost and low availability last year of NVIDIA Jetson systems (I haven’t checked on that situation recently), however, I switched from Jetson to Intel Nuc gaming devices equipped with NVIDIA RTX-level GPUs and run minknow under Ubuntu. It works pretty well in case anyone needs an alternative that is not too far off from the original size (a little bigger) of the Jetsons. They also have more ports and can double as pretty decent and versatile general use computers. e.g.: https://www.amazon.com/Intel-Enthusiast-NUC11PHKi7C-Barebone-i7-1165G7/dp/B09DDJFSNY/ref=sr_1_3?crid=159ZQQ4B4G68&keywords=intel+nuc+11+enthusiast+barebones&qid=1674752926&sprefix=intel+nuc+11+enthusiast+barebones%2Caps%2C146&sr=8-3 The cost is now half of what I paid for barebones systems about a year ago. I put in 16Gb or 32Gb of memory and a 1TB NVMe for less than $200. Ubuntu OS is free and comes loaded - Libre Office and other desktop programs run better on these than on the Jetson device in my experience.

…

-Tom

On Jan 26, 2023, at 8:48 AM, pablosoup1 ***@***.***> wrote: ***@***.*** commented on this gist. Thanks so much for pointing me in the right direction! Here's ONT's official response/fix: https://community.nanoporetech.com/posts/certificate-expiry-for-min And the first image they show is exactly what I saw in the GUI, with no real error codes showing up. — Reply to this email directly, view it on GitHub or unsubscribe. You are receiving this email because you commented on the thread. Triage notifications on the go with GitHub Mobile for iOS or Android.

BTW, I just downloaded the certs using the link provided for Mac/PC, then moved it into the appropriate spot on my Jetson. Worked like a charm (because I'd forced the system to quit updating the ONT packages, this was a quick workaround).

ONT just announced that they are removing the old authentication system.

https://community.nanoporetech.com/posts/retiring-old-minknow-authe

I take it this will probably crater the Jetson nano?

@pablosoup1 - not sure what you mean by "crater the Jetson nano"?

The authentication change shouldn't cause any issues as long as you are using the latest MinION Mk1C software branch, as this is up to date and includes the change. Now, if you are still using the old MinIT branch then yes this will stop working. But there is no reason to be on that software when the Mk1C software runs well and gives you all the latest features.

On that note, the next version of MinKNOW sees Guppy being replaced by Dorado (even on the Mk1C). This is good for many reasons, but mainly: 1) dorado has matured and is much faster than Guppy now, 2) dorado has native ARM builds, including for the newer Jetson Orin architecture. So for all those out there with Orin boards, you should be able to get a fully working sequencing stack in the next month or so, as soon as MinKNOW has Dorado integrated.