Ender 2 Start- and End-G-code for Cura

end-gcode

G91 ;Relative positioning
G1 E-60 ;Remove filament from hotend completely
G1 Z5 ;Hover over the print

G90 ;Absolute positioning
G1 X0 Y140 ;Present print

M106 S0 ;Turn off fan
M104 S0 ;Turn off hotend
M140 S0 ;Turn off bed

M84 X Y Z E ;Disable all steppers

start-gcode

M201 X500.00 Y500.00 Z100.00 E5000.00 ;Setup machine max acceleration
M203 X500.00 Y500.00 Z10.00 E50.00 ;Setup machine max feedrate
M204 P500.00 R1000.00 T500.00 ;Setup Print/Retract/Travel acceleration
M205 X8.00 Y8.00 Z0.40 E5.00 ;Setup Jerk
M220 S100 ;Reset Feedrate
M221 S100 ;Reset Flowrate

G28 ;Home

G91 ;Relative positioning
G1 E60 ;Bring filament into hot-end
G90 ;Absolute positioning
G92 E0 ;Reset Extruder
G1 Z2.0 F3000 ;Move Z Axis up
G1 X10.1 Y20 Z0.28 F5000.0 ;Move to start position
G1 X10.1 Y100.0 Z0.28 F1500.0 E8 ;Draw the first line
G1 X10.4 Y100.0 Z0.28 F5000.0 ;Move to side a little
G1 X10.4 Y20 Z0.28 F1500.0 E15 ;Draw the second line
G92 E0 ;Reset Extruder
G1 Z2.0 F3000 ;Move Z Axis up