Created
July 27, 2017 13:44
-
-
Save skorasaurus/52a73578249a373d7a2ada5659afbf60 to your computer and use it in GitHub Desktop.
MY hard drive information
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
sudo smartctl -a /dev/sda | |
smartctl 6.5 2016-01-24 r4214 [x86_64-linux-4.10.0-27-generic] (local build) | |
Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org | |
=== START OF INFORMATION SECTION === | |
Model Family: Seagate Barracuda 7200.14 (AF) | |
Device Model: ST1000DM003-1SB102 | |
Serial Number: Z9A86483 | |
LU WWN Device Id: 5 000c50 0933331ea | |
Firmware Version: HPH3 | |
User Capacity: 1,000,204,886,016 bytes [1.00 TB] | |
Sector Sizes: 512 bytes logical, 4096 bytes physical | |
Rotation Rate: 7200 rpm | |
Form Factor: 3.5 inches | |
Device is: In smartctl database [for details use: -P show] | |
ATA Version is: ACS-3 T13/2161-D revision 3b | |
SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s) | |
Local Time is: Thu Jul 27 09:41:28 2017 EDT | |
SMART support is: Available - device has SMART capability. | |
SMART support is: Enabled | |
=== START OF READ SMART DATA SECTION === | |
SMART overall-health self-assessment test result: PASSED | |
General SMART Values: | |
Offline data collection status: (0x82) Offline data collection activity | |
was completed without error. | |
Auto Offline Data Collection: Enabled. | |
Self-test execution status: ( 0) The previous self-test routine completed | |
without error or no self-test has ever | |
been run. | |
Total time to complete Offline | |
data collection: ( 0) seconds. | |
Offline data collection | |
capabilities: (0x5b) SMART execute Offline immediate. | |
Auto Offline data collection on/off support. | |
Suspend Offline collection upon new | |
command. | |
Offline surface scan supported. | |
Self-test supported. | |
No Conveyance Self-test supported. | |
Selective Self-test supported. | |
SMART capabilities: (0x0003) Saves SMART data before entering | |
power-saving mode. | |
Supports SMART auto save timer. | |
Error logging capability: (0x01) Error logging supported. | |
General Purpose Logging supported. | |
Short self-test routine | |
recommended polling time: ( 2) minutes. | |
Extended self-test routine | |
recommended polling time: ( 112) minutes. | |
SCT capabilities: (0x10bd) SCT Status supported. | |
SCT Error Recovery Control supported. | |
SCT Feature Control supported. | |
SCT Data Table supported. | |
SMART Attributes Data Structure revision number: 32 | |
Vendor Specific SMART Attributes with Thresholds: | |
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE | |
1 Raw_Read_Error_Rate 0x002f 082 069 006 Pre-fail Always - 185188609 | |
3 Spin_Up_Time 0x0023 097 097 000 Pre-fail Always - 0 | |
4 Start_Stop_Count 0x0032 100 100 000 Old_age Always - 146 | |
5 Reallocated_Sector_Ct 0x0033 100 100 010 Pre-fail Always - 0 | |
7 Seek_Error_Rate 0x002f 074 060 030 Pre-fail Always - 29257362 | |
9 Power_On_Hours 0x0032 096 096 000 Old_age Always - 3970 | |
10 Spin_Retry_Count 0x0033 100 100 097 Pre-fail Always - 0 | |
12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 145 | |
180 Unknown_HDD_Attribute 0x002a 100 100 000 Old_age Always - 958747490 | |
183 Runtime_Bad_Block 0x0032 100 100 000 Old_age Always - 0 | |
184 End-to-End_Error 0x0033 100 100 097 Pre-fail Always - 0 | |
187 Reported_Uncorrect 0x0032 100 100 000 Old_age Always - 0 | |
188 Command_Timeout 0x0032 100 100 000 Old_age Always - 0 0 0 | |
189 High_Fly_Writes 0x003a 100 100 000 Old_age Always - 0 | |
190 Airflow_Temperature_Cel 0x0022 061 058 040 Old_age Always - 39 (Min/Max 36/40) | |
193 Load_Cycle_Count 0x0032 100 100 000 Old_age Always - 296 | |
194 Temperature_Celsius 0x0022 039 021 000 Old_age Always - 39 (0 21 0 0 0) | |
195 Hardware_ECC_Recovered 0x003a 001 001 000 Old_age Always - 185188609 | |
196 Reallocated_Event_Count 0x0032 100 100 000 Old_age Always - 0 | |
197 Current_Pending_Sector 0x0032 100 100 000 Old_age Always - 0 | |
198 Offline_Uncorrectable 0x0030 100 100 000 Old_age Offline - 0 | |
199 UDMA_CRC_Error_Count 0x0032 200 200 000 Old_age Always - 0 | |
SMART Error Log Version: 1 | |
No Errors Logged | |
SMART Self-test log structure revision number 1 | |
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error | |
# 1 Short offline Completed without error 00% 4 - | |
# 2 Short offline Completed without error 00% 1 - | |
SMART Selective self-test log data structure revision number 1 | |
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS | |
1 0 0 Not_testing | |
2 0 0 Not_testing | |
3 0 0 Not_testing | |
4 0 0 Not_testing | |
5 0 0 Not_testing | |
Selective self-test flags (0x0): | |
After scanning selected spans, do NOT read-scan remainder of disk. | |
If Selective self-test is pending on power-up, resume after 0 minute dela |
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment